Views
3 years ago

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

192 8.6 Syncing to Midi

192 8.6 Syncing to Midi Clock and Song Position Pointer Midi Clock is a standard sync signal which is transmitted over Midi. It is not used for tape sync, but rather for syncing drum machines, sequencers and other devices together. Midi Clock only contains tempo information, but no song position information. Song position information is provided by a different signal, Midi Song Position Pointer, which is mixed in with the Midi Clock signal. To set the MPC60 to generate Midi Clock and Song Position Pointer: 1. Press the TEMPO/SYNC key, then press the soft key, and the sync screen will appear: 2. Move the cursor to the MIDI CLOCK field. This field has five options: OFF, MIDI1, MIDI2, MIDI3, and MIDI4. OFF turns generation of Midi Clock off. The other four options are used to select whether the signal is output from Midi output jacks 1, 2, 3 or 4. Both Midi Clock and Song Position Pointer are generated simultaneously. Set this field so that the desired midi output jack outputs the midi clock signal. 3. Now, whenever the MPC60 is played, Midi Clock and Song Position Pointer will be output through the Midi output jack you have selected. To sync from an external device sending Midi Clock with or without Song Position Pointer: 1. Connect the MIDI OUTPUT of the sending device to the MIDI INPUT 2 of the MPC60. (You may alternatively use input 1- if so, set the MIDI IN field to 1.) 2. Press the TEMPO/SYNC key, then press the soft key, and the sync screen will appear:

Section 8: Syncing to tape and other devices 193 3.Set the MODE field (Sync input section) to MIDI CLOCK W/SONG POINTER if you want to receive midi clock and song pointer messages. If you want to ignore any incoming song pointer messages, set it to MIDI CLOCK 4.Set the MIDI INPUT field to 2. 5.Press the MAIN SCREEN key. 6.Create your sequence on the MPC60. 7. Now, start the external device and the ASQ10 will automatically play in sync. If Song Position Pointer messages are not being used, you must position each device at its start before playing the master. To play back a "Song" (Song mode) in sync to the Midi Clock: To play back a "Song" in sync to the Midi Clock signal, follow the above instructions, except select the SONG MODE screen before receiving the Midi Clock signal. This way, the active song will play instead of the active sequence.

Roland KC-60 Owners Manual - Sweetwater.com
Roland KC-60 Owners Manual - Sweetwater.com
DD-65/YDD-60 Owner's Manual - zzounds.com
Tandy Model 3 Disk System Owners Manual.pdf - 400 Bad Request
OWNER'S MANUAL - Roland
Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc
Alesis Micron Owners Manual.pdf - Fdiskc
Akai MPC Catalog - MIDI Mark
Akai MPC2500 Manual - Platinum Audiolab
Setting up the MPK49 and MPD32 with Ableton Live - Akai
Owners Manual.pdf - Decware
EL DIABLO 60 Owners Manual - Genz Benz