3 years ago

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

30 2.11 The MAIN SCREEN

30 2.11 The MAIN SCREEN key- how to exit any function Pressing the MAIN SCREEN key at almost any time will return you back to the main PLAY/R,ECORD screen of the MPC60 without damaging any data. Use this key as a "panic" button - if you find yourself in some function you don't understand and want to get out.

Section 2: The Basics 31 2.12 The RESET TO DEFAULTS function The contents of most of the data fields in each of the screens in the MPC60 are retained after the power is turned off and on again. Even though all sounds and sequences are lost when power is removed, these settings are retained by a special battery powered memory. Because of this, there is no need to reset the MPC60's settings to your personal taste every time you power on. However, there are times when it is desirable to reset all of these settings to their original factory-preset settings. There is a special function called "Reset to defaults" which does exactly this. To perform a reset to defaults: 1. Press the OTHER key, and this screen will appear: 2. Press SOFT KEY 1, . 3. A second screen will appear, asking you if you are sure you want to reset to defaults. Press SOFT KEY 1 again, . Now, all data fields will be reset to their factory-preset status. NOTE: These settings which are retained with power removed may be saved in a special file called a "Parameter file". See the DISK section of the manual to learn more about this feature.

Tandy Model 3 Disk System Owners Manual.pdf - 400 Bad Request
DD-65/YDD-60 Owner's Manual -
Roland KC-60 Owners Manual -
Roland KC-60 Owners Manual -
Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc
Alesis Micron Owners Manual.pdf - Fdiskc
Akai MPC Catalog - MIDI Mark
Akai MPC2500 Manual - Platinum Audiolab
Setting up the MPK49 and MPD32 with Ableton Live - Akai
Owners Manual.pdf - Decware
EL DIABLO 60 Owners Manual - Genz Benz