Views
3 years ago

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

56 This screen presents

56 This screen presents various parameters relevant to the timing correct function. A description of each of the fields follows: • The NOTE VALUE field: Timing correction works by moving your recorded notes to a preset note value. This field is used to select that note value. The options are: l.l/8 NOTE: All notes are moved to the nearest 1/8 note 2.1/8 TRPLT: All notes are moved to the nearest 1/8 note triplet 3.1/16 NOTE: All notes are moved to the nearest 1/16 note 4.1/16 TRPLT: All notes are moved to the nearest 1/6 note triplet 5.1/32 NOTE: All notes are moved to the nearest 1/32 note 6. 1/32 TRPLT: All notes are moved to the nearest 1/32 note triplet 7. OFF(1/384): No timing correction- in this setting, the highest resolution of the MPC60 is used- 96 divisions per 1/4 note. This value also affects two other functions in the MPC60: 1. It sets the NOTE REPEAT value, described later in this section. 2. It sets the amount by which the current sequence position changes when either the "" (rewind, fast forward) keys are pressed. • The SHUFFLE field: This is the shuffle setting, described in the section below entitled "The shuffle function". This only has an effect if the setting of the NOTE VALUE field is either 1/8 or 1/16 notes - for all other settings, it has no effect. The input range is from 50% (no shuffle effect) to 75% (maximum shuffle effect). • The SHIFT TIMING and SHIFT AMOUNT fields: These two fields comprise the shift timing function, described below in the section entitled "Shift Timing". There are two fields: The SHIFT TIMING field specifies the direction of the shift - the options are EARLIER and LATER. The SHIFT AMOUNT field specifies the amount of shift in clocks (1/96 of a 1/4 note).

Section 3: Recording sequences 57 The FROM and TO fields: These 2 fields are used to specify the region of the sequence which will be altered when the soft key is pressed. These are BAR.BEAT.CLOCK fields - the region starts at the location entered in the FROM field and ends one clock before the location entered in the TO field. • The TRACK(0=ALL) field: This field is only used in conjunction with the soft key. It is used to specify the track number which is to be altered -entering a "0" indicates all tracks. • SOFT KEY 1 -

DD-65/YDD-60 Owner's Manual - zzounds.com
Roland KC-60 Owners Manual - Sweetwater.com
Roland KC-60 Owners Manual - Sweetwater.com
OWNER'S MANUAL - Roland
Tandy Model 3 Disk System Owners Manual.pdf - 400 Bad Request
Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc
Alesis Micron Owners Manual.pdf - Fdiskc
Akai MPC Catalog - MIDI Mark
Akai MPC2500 Manual - Platinum Audiolab
Setting up the MPK49 and MPD32 with Ableton Live - Akai
Owners Manual.pdf - Decware
EL DIABLO 60 Owners Manual - Genz Benz