Views
3 years ago

MotoAdmin - Motoman

MotoAdmin - Motoman

8 Introduction ►

8 Introduction ► Controlling job execution. ► Display and also reset alarm and errors. Watch alarm history. ► Get system information like software version data, installed functions, robot types, external axis, position data. ► Edit job data (without syntax checking). The functions are grouped into 3 different security zones. It must be considered that depending on selected security level, there are some functions which can cause danger to human and machine. Therefore it is important that only well-trained staff members are consulted to work with MotoAdmin. MotoAdmin base package is limited to 4 robot controllers. If more robot controllers should be managed by MotoAdmin additional licences must be purchased. 24.04.2006 Motoman robotec GmbH

Installation and basic configuration 9 2 Installation and basic configuration 2.1 Components MotoAdmin package contains: ► 1 CD-ROM ► 1 hardware key ► 1 RS232 cable; robot controller (9pin) pc (9pin) ► 1 user manual 2.2 System requirements ► Windows PC • WindowsXP/2000 • Ethernet TCP/IP network interface or serial COM interface • 20 MByte free harddisk storage capacity • CDROM drive ► Robot controller XRC or NX100 2.3 Installation of MotoAdmin Installation of hardware key should be done after software installation. Otherwise there may be some problems in case of USB hardware keys. Before starting software installation procedure, login to windows system with local adminis- rights. trative Insert CDROM into CDROM drive of computer. The installation now starts automatically. If not use windows explorer, change to CDROM drive letter and run „cdstarter.exe“ directly from CDROM. After splash screen is displayed select installation of MotoAdmin. If corresponding message appears restart your computer. Execution of MotoAdmin is only possible, if the hardware key is attached to the parallel port (optional USB port) of your computer. Please confirm selected interface is a parallel interface and not a 25pin serial one. 2.4 Uninstallation of MotoAdmin To uninstall MotoAdmin software open windows control panel and select Add/Remove pro- grams. Motoman robotec GmbH 24.04.2006

Cursos abiertos de formación MOTOMAN XRC
Total Customer Support - Motoman Robotics
mpl80, mpl100, mpl160 mpl300, mpl800 motoman ... - ScanRobot
Samsung 23.5" Curved LED Monitor with High Glossy Finish - LS24E510CS/ZA - User Manual ver. 1.0 (ENGLISH,1.56 MB)
Samsung 34" Ultra-wide Curved Screen Monitor - LS34E790CNS/ZA - User Manual ver. 1.0 (ENGLISH,1.97 MB)
User Guide Product(range) - Neopost
Samsung 27" monitor with Easel Stand - LS27D590PS/ZA - User Manual (ENGLISH)
Samsung 23.6" Monitor with High Glossy Finish - LU24E590DS/ZA - User Manual ver. 1.0 (ENGLISH,2.25 MB)
Samsung Samsung Simple LED 23” Monitor with Crystal Neck Finish - LS23C570HS/ZA - User Manual ver. 1.0 (ENGLISH,3.86 MB)
Samsung Samsung Simple LED 23” Monitor with Crystal Neck Finish - LS23C570HS/ZA - User Manual (ENGLISH)
Samsung 23.6" LED Monitor with Glossy and ToC T-shape Stand - LS24E390HL/ZA - User Manual ver. 1.0 (ENGLISH,4.0 MB)
Samsung 28" Monitor with High Glossy Finish - LU28E590DS/ZA - User Manual (ENGLISH)
Samsung 23.6" LED Monitor w Ultra-slim Bezel - LS24E360HL/ZA - User Manual (ENGLISH)
900 Control Station - Merkantile
Samsung S27C450D - 27” SC450 Series LED Monitor - LS27C45KDSV/ZA - User Manual (ENGLISH)
Samsung S27C450D - 27” SC450 Series LED Monitor - LS27C45KDSV/ZA - User Manual (ENGLISH)
Geovision NVR Software Feature Guide - Use-IP
BW-L21 Guide
Introduction to Robotics - Dr. KR Chowdhary
EtherNet/IP Modules in Logix5000 Control Systems