FPS Series Convertible Jet Pump - Franklin Electric

FPS Series Convertible Jet Pump
Shallow Well Performance
HP
CWJ Series
Injector
Order No.
1/2 HP 18-1247-01
3/4 HP 18-1248-00
1 HP 18-1701-00
High Head
1/2 HP
High Head
3/4 HP
High Head
1 HP
18-1200-12
18-1247-01
18-1247-01
Suction
Lift ft.
Discharge Pressure - PSI
30 35 40 45 50 55 60 65 70
Gallons per Minute
Shut-off
Pressure
PSI
5 12 10 7.5 5 2 55
10 11 9 6 3.5 53
15 10 8 5 2 51
20 9.5 6.5 4 1 49
25 8 5 2 47
5 21.5 19.5 15.5 10.5 5 53
10 21 18 13.5 8 51
15 20 16.5 11 6.5 49
20 18 14 9 2 47
25 16 12 6 45
5 19.8 18.8 16.6 14 10.3 5.5 60
10 18.1 17.5 15.6 12.6 8.6 3.5 58
15 15 14.5 14.2 10.8 6.6 1.3 56
20 12.6 12.5 12.7 8.8 4.1 54
25 10 9.8 9.3 6.8 1.6 52
5 6 5.6 5 4.3 3.5 2.6 1.6 0.6 68
10 5.3 4.9 4.6 4 3 1.9 0.9 65
15 4.9 4.6 4.2 3.5 2.5 1.5 0.6 63
20 4.4 4.2 3.9 3 2.1 1.1 0.3 61
25 3.4 3.2 3 2.3 1.4 0.6 58
5 11.5 10.8 10 8.6 7 4.5 2 69
10 10.1 9 7 5 2.8 0.5 66
15 9.2 8 6.2 4.2 2 64
20 8.2 7 5.4 3 0.5 61
25 5.9 5 3.5 1.5 58
5 12 12 12 11 9 7 5 2.5 76
10 11 10.5 10.5 10 8 6 4 1.5 74
15 9.5 9 9 9 7 5 3 71
20 8 8 7.5 7.5 6 4 2 69
25 6.5 6.5 6 6 5 3 1 67
Notes: 1) The appropriate shallow well injector is included with the units.
2) All the above discharge pressures were measured using 1-1/4”
PVC suction pipe and 1-1/4” foot valve.
MF2012 1.08
400 East Spring Street, Bluffton, Indiana 46714
Tel: 260.824.2900 Fax: 260.824.2909
www.franklin-electric.com

Convertible Jet Pump
CWJ Series
The CWJ features a square flange motor for excellent
performance at a competitive price. It delivers up to 21
gallons per minute in shallow wells and 13 gallons per
minute in deep wells. Available in 1/2, 3/4, and 1 hp.
Features:
n Thermoplastic impeller assures increased hydraulic
efficiency.
n Thermoplastic diffuser is molded for efficiency and
dependability.
n Cast-iron case for maximum durability.
n Square flange motor with threaded shaft for direct
mounting of impeller.
n Mechanical shaft seal ensures leakproof fit.
n Pressure switch is provided (20/40 psi).
n “Convertible” Hardware includes plugs, by-pass
plug, and shallow well injector. (Screw-in injector
allows for easy conversion from shallow to deep
well installation).
n Connections
1-1/4” FNPT Suction
1” FNPT Discharge
1” FNPT Drive Line
n Maximum temperature 140 ˚F.
n Dual Voltage: 115/230 V

FPS Series Convertible Jet Pump
CWJ Series
A
4-5/16”
2” 6-3/8”
8-13/16”
Dimensions / Weight
HP A Weight
1/2 15.81 36
3/4 16.31 38
1 16.81 41
Note: Dimensions will vary according to motor manufacturer.
2-3/8”
6-1/2”
9-1/4”
Deep Well Injector Information
(required for Deep Well Installations)
HP
Notes:
Injector Ordering No.
30-60 ft. Lift
Injector Ordering No.
60-90 ft. Lift
Weight
1/2 147E-1118 147E-1115 7
3/4 147E-1123 147E-1118 7
1 147E-1123 147E-1118 7
Hardware kit provided with each pump: Screw-in shallow well
injector, bypass plug, pipe plugs. Pressure switch is provided and
preset to 20-40 psi. Order pressure gauge and deep well injector
separately.
1) 1-1/4” FNPT suction connection and 1” FNPT drive pipe connection.
2) Minimum inside well diameter requirement of 4”.

FPS Series Convertible Jet Pump
Deep Well Performance
HP
1/2 HP
3/4 HP
CWJ Series
Injector
Order No.
Cast Iron
147E-1118
Cast Iron
147E-1115
Cast Iron
147E-1123
Cast Iron
147E-1118
Total
Suction
Lift ft.
Discharge Pressure - PSI
30 35 40 45 50 55 60 65
Gallons per Minute
Shut-off
Pressure
PSI
30 6.0 4.6 3.6 2.7 1.8 0.9 0.1 61
40 4.8 3.6 2.7 1.8 1.0 0.2 57
50 4.0 2.8 2.0 1.1 0.3 52
60 3.0 1.9 1.1 0.3 47
60 2.6 2.0 1.5 0.9 0.4 54
70 2.1 1.6 1.1 0.5 51
80 1.6 1.1 0.6 0.1 46
90 1.1 0.6 0.1 42
30 12.5 10.3 8.1 6.0 3.8 1.9 0.1 61
40 10.8 8.5 6.4 4.2 2.2 0.4 56
50 9.0 6.6 4.5 2.4 0.6 52
60 7.0 4.8 2.9 1.0 48
60 6.9 5.7 4.5 3.5 2.5 1.6 0.8 0.1 66
70 5.8 4.7 3.6 2.7 1.9 1.0 0.3 63
80 4.8 3.7 2.7 2.0 1.1 0.3 58
90 3.7 2.9 2.1 1.3 0.5 54
1 HP
Cast Iron
147E-1123
Cast Iron
147E-1118
30 13.6 11.3 9.5 7.3 5.3 3.2 1.6 65
40 11.3 9.5 7.3 5.3 3.5 1.6 60
50 9.0 7.5 5.6 3.7 1.9 0.1 56
60 7.0 6.0 4.2 2.3 0.5 52
60 7.4 6.1 5.1 4.1 3.3 2.4 1.6 0.8 70
70 6.5 5.4 4.5 3.5 2.6 1.8 1.0 0.3 67
80 5.4 4.4 3.5 2.6 1.8 1.0 0.3 62
90 4.4 3.5 2.8 1.9 1.1 0.3 57
Notes: 1) Deep Well injectors must be ordered separately.
2) All the above discharge pressures were measured using 1-1/4” PVC suction pipe, 1-1/4” foot valve and 1” drive pipe.