FPS Series Convertible Jet Pump - Franklin Electric
Convertible Jet Pump CWJ Series The CWJ features a square flange motor for excellent performance at a competitive price. It delivers up to 21 gallons per minute in shallow wells and 13 gallons per minute in deep wells. Available in 1/2, 3/4, and 1 hp. Features: n Thermoplastic impeller assures increased hydraulic efficiency. n Thermoplastic diffuser is molded for efficiency and dependability. n Cast-iron case for maximum durability. n Square flange motor with threaded shaft for direct mounting of impeller. n Mechanical shaft seal ensures leakproof fit. n Pressure switch is provided (20/40 psi). n “Convertible” Hardware includes plugs, by-pass plug, and shallow well injector. (Screw-in injector allows for easy conversion from shallow to deep well installation). n Connections 1-1/4” FNPT Suction 1” FNPT Discharge 1” FNPT Drive Line n Maximum temperature 140 ˚F. n Dual Voltage: 115/230 V
FPS Series Convertible Jet Pump CWJ Series A 4-5/16” 2” 6-3/8” 8-13/16” Dimensions / Weight HP A Weight 1/2 15.81 36 3/4 16.31 38 1 16.81 41 Note: Dimensions will vary according to motor manufacturer. 2-3/8” 6-1/2” 9-1/4” Deep Well Injector Information (required for Deep Well Installations) HP Notes: Injector Ordering No. 30-60 ft. Lift Injector Ordering No. 60-90 ft. Lift Weight 1/2 147E-1118 147E-1115 7 3/4 147E-1123 147E-1118 7 1 147E-1123 147E-1118 7 Hardware kit provided with each pump: Screw-in shallow well injector, bypass plug, pipe plugs. Pressure switch is provided and preset to 20-40 psi. Order pressure gauge and deep well injector separately. 1) 1-1/4” FNPT suction connection and 1” FNPT drive pipe connection. 2) Minimum inside well diameter requirement of 4”.