Views
3 years ago

user's guide table of contents

user's guide table of contents

checking the print

checking the print cartridge status If the arrow points to the tri-color or the black low ink icon, replace the relevant print cartridge. verifying that the problem is solved When you close the printer's top cover, the green light will be on with no flashing lights. file:///C|/Projects/Subway/Mac_UG/ug_printcartridge_statuslight_fs.html (3 of 3) [1/17/2002 3:22:49 PM]

printer is not printing printer is not printing verify the following ● ● ● ● ● ● ● ● The printer is connected to the power source. The cable connections are secure. The printer is turned on. The media is correctly placed in the paper tray. The Rear Access Door is attached. The print cartridges are correctly installed. For installation instructions, see replacing print cartridges. The printer's top cover is closed. When the Resume button is pushed and held for several seconds, a print sample page prints out. This confirms that the printer is functioning properly. check the printer lights ● ● ● ● If the Power light is blinking, the printer is in the process of printing. If the Resume light is blinking, press the Resume button. If the Print Cartridge Status light is blinking, see checking the print cartridge status. If all lights are blinking, see all lights are flashing. select a topic below If the printer still does not print, select the topic below that best describes the problem: ● ● ● ● paper problems printer does not turn on print job was deleted USB problems paper problems Click the topic below that best describes the problem: ● paper jam file:///C|/Projects/Subway/Mac_UG/ug_notprinting_fs.html (1 of 4) [1/17/2002 3:22:50 PM]

Table of Contents - Odys
Table of Contents
Table of Contents
TAble OF COntents
Table Of Contents
User Guide - Neopost
Table of Contents - Odys
Table of Contents - D-Link
Table of contents - USA Spec
Table Of Contents - LumenVox
Table of Contents - QMP
Table of Contents
Table of Contents