ts_125331v120300p

3GPP TS 25.331 version

3GPP TS 25.331 version 12.3.0 Release 12 1859 ETSI TS 125 331 V12.3.0 (2014-10) SRB-SpecificIntegrityProtInfo ::= SEQUENCE { ul-RRC-HFN BIT STRING (SIZE (28)), dl-RRC-HFN BIT STRING (SIZE (28)), ul-RRC-SequenceNumber RRC-MessageSequenceNumber, dl-RRC-SequenceNumber RRC-MessageSequenceNumber } SRB-SpecificIntegrityProtInfoList ::= SEQUENCE (SIZE (4..maxSRBsetup)) OF SRB-SpecificIntegrityProtInfo StateOfRRC ::= ENUMERATED { cell-DCH, cell-FACH, cell-PCH, ura-PCH } StateOfRRC-Procedure ::= ENUMERATED { awaitNoRRC-Message, awaitRB-ReleaseComplete, awaitRB-SetupComplete, awaitRB-ReconfigurationComplete, awaitTransportCH-ReconfigurationComplete, awaitPhysicalCH-ReconfigurationComplete, awaitActiveSetUpdateComplete, awaitHandoverComplete, sendCellUpdateConfirm, sendUraUpdateConfirm, -- dummy is not used in this version of specification -- It should not be sent dummy, otherStates } TotalRLC-AM-BufferSize-r5 ::= ENUMERATED { kb10, kb50, kb100, kb150, kb200, kb300, kb400, kb500, kb750, kb1000 } TPC-Combination-Info ::= SEQUENCE { primaryCPICH-Info tpc-CombinationIndex } TPC-Combination-Info-r9 ::= SEQUENCE { primaryCPICH-Info tpc-CombinationIndex } PrimaryCPICH-Info, TPC-CombinationIndex PrimaryCPICH-Info, TPC-CombinationIndex UE-MultiModeRAT-Capability-r5 ::= SEQUENCE { multiRAT-CapabilityList MultiRAT-Capability, multiModeCapability MultiModeCapability, supportOfUTRAN-ToGERAN-NACC BOOLEAN } UE-Positioning-Capability-r4 ::= SEQUENCE { standaloneLocMethodsSupported BOOLEAN, ue-BasedOTDOA-Supported BOOLEAN, networkAssistedGPS-Supported NetworkAssistedGPS-Supported, supportForUE-GPS-TimingOfCellFrames BOOLEAN, supportForIPDL BOOLEAN, rx-tx-TimeDifferenceType2Capable BOOLEAN, validity-CellPCH-UraPCH ENUMERATED { true } OPTIONAL, sfn-sfnType2Capability ENUMERATED { true } OPTIONAL } UE-Positioning-LastKnownPos ::= SEQUENCE { sfn INTEGER (0..4095), cell-id CellIdentity, positionEstimate PositionEstimate } UE-RadioAccessCapability-r4 ::= SEQUENCE { accessStratumReleaseIndicator AccessStratumReleaseIndicator, pdcp-Capability PDCP-Capability-r4, rlc-Capability RLC-Capability, transportChannelCapability TransportChannelCapability, rf-Capability RF-Capability-r4, physicalChannelCapability PhysicalChannelCapability-r4, ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability, ETSI

3GPP TS 25.331 version 12.3.0 Release 12 1860 ETSI TS 125 331 V12.3.0 (2014-10) } securityCapability SecurityCapability, ue-positioning-Capability UE-Positioning-Capability-r4, measurementCapability MeasurementCapability-r4 OPTIONAL UE-RadioAccessCapability-r5 ::= SEQUENCE { accessStratumReleaseIndicator AccessStratumReleaseIndicator, dl-CapabilityWithSimultaneousHS-DSCHConfig DL-CapabilityWithSimultaneousHS-DSCHConfig pdcp-Capability PDCP-Capability-r5, rlc-Capability RLC-Capability-r5, transportChannelCapability TransportChannelCapability, rf-Capability RF-Capability-r4, physicalChannelCapability PhysicalChannelCapability-r5, ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability-r5, securityCapability SecurityCapability, ue-positioning-Capability UE-Positioning-Capability-r4, measurementCapability MeasurementCapability-r4 OPTIONAL } UE-RadioAccessCapability-r6 ::= SEQUENCE { accessStratumReleaseIndicator AccessStratumReleaseIndicator, dl-CapabilityWithSimultaneousHS-DSCHConfig DL-CapabilityWithSimultaneousHS-DSCHConfig pdcp-Capability PDCP-Capability-r6, rlc-Capability RLC-Capability-r5, transportChannelCapability TransportChannelCapability, rf-Capability RF-Capability-r4, physicalChannelCapability PhysicalChannelCapability-r5, ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability-r5, securityCapability SecurityCapability, ue-positioning-Capability UE-Positioning-Capability-r4, measurementCapability MeasurementCapability-r4 OPTIONAL } OPTIONAL, OPTIONAL, UL-RFC3095-Context ::= SEQUENCE { rfc3095-Context-Identity INTEGER (0..16383), ul-mode ENUMERATED {u, o, r}, ul-ref-ir OCTET STRING ( SIZE (1..3000)), ul-ref-time INTEGER (0..4294967295) OPTIONAL, ul-curr-time INTEGER (0..4294967295) OPTIONAL, ul-syn-offset-id INTEGER (0..65535) OPTIONAL, ul-syn-slope-ts INTEGER (0..4294967295) OPTIONAL, ul-ref-sn-1 INTEGER (0..65535) OPTIONAL } END 12 Message transfer syntax Transfer syntax for RRC PDUs is derived from their ASN.1 definitions by use of Packed Encoding Rules, unaligned as specified in X.691 [49], and with adapted final padding. If special encoding is used, it is indicated in the ECN module defined for each ASN.1 module. The use of special encoding is defined in [14]. The following encoding rules apply in addition to what has been specified in X.691 [49]: - When a bit string value is placed in a bit-field as specified in 15.6 to 15.11 in [11], the leading bit of the bit string value shall be placed in the leading bit of the bit-field, and the trailing bit of the bit string value shall be placed in the trailing bit of the bit-field. NOTE: The terms "leading bit" and "trailing bit" are defined in ITU-T Rec. X.680 | ISO/IEC 8824-1. When using the "bstring" notation, the leading bit of the bit string value is on the left, and the trailing bit of the bit string value is on the right. 12.1 Structure of encoded RRC messages An RRC PDU, which is the bit string that is exchanged between peer entities/ across the radio interface, is the concatenation of a basic production, an extension and padding, in that order. RRC PDUs shall be mapped to and from RLC SDUs upon transmission and reception as follows: ETSI