28.11.2014 Views

ts_125331v120300p

ts_125331v120300p

ts_125331v120300p

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3GPP TS 25.331 version 12.3.0 Release 12<br />

1874<br />

ETSI TS 125 331 V12.3.0 (2014-10)<br />

13.4.2 Void<br />

13.4.2a CONFIGURATION_INCOMPLETE<br />

This variable indicates whether a received measurement control message contains invalid an incomplete measurement<br />

configuration.<br />

Information Element/Group Need Multi Type and Semantics description<br />

name<br />

reference<br />

Configuration incomplete MP Boolean TRUE: An incomplete<br />

configuration has been<br />

detected.<br />

Set to FALSE when entering<br />

UTRA RRC connected mode.<br />

Set to FALSE when leaving<br />

UTRA RRC connected mode.<br />

13.4.3 C_RNTI<br />

This variable stores the assigned C-RNTI for this UE when in CELL_FACH state. For FDD and 1.28 Mcps TDD, this<br />

variable stores the assigned C-RNTI for this UE in CELL_PCH state, if in CELL_PCH state a HS-DSCH transport<br />

channel has been allocated.<br />

Information Element/Group<br />

name<br />

Need Multi Type and<br />

reference<br />

C-RNTI OP C-RNTI<br />

10.3.3.8<br />

Semantics description<br />

Cleared when entering UTRA<br />

RRC connected mode when<br />

not otherwise stated in the<br />

procedure.<br />

Cleared when leaving UTRA<br />

RRC connected mode.<br />

13.4.3a DEFERRED_MEASUREMENT_STATUS<br />

Information Element/Group<br />

name<br />

Need Multi Type and<br />

reference<br />

Semantics description<br />

Deferred measurement status MP Boolean If TRUE, the UE can transmit RRC<br />

messages on RACH and receive<br />

RRC messages commanding it to<br />

enter CELL_DCH without having<br />

read and acted on SIB11, SIB11bis,<br />

SIB12, SIB18 and SIB19.<br />

Version<br />

REL-7<br />

13.4.3b DTX_DRX_PARAMS<br />

NOTE:<br />

For FDD only.<br />

Information Element/Group<br />

name<br />

Need Multi Type and<br />

reference<br />

UE parameters for DTX-DRX MD DTX-DRX<br />

Information<br />

in 10.3.6.34a<br />

Semantics<br />

description<br />

Version<br />

REL-7<br />

13.4.3c DTX_DRX_STATUS<br />

NOTE:<br />

For FDD only.<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!