ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
994
ETSI TS 125 331 V12.3.0 (2014-10)
channel
>Transport Block Size List MP 1 to 2 REL-8
>>Transport Block Size Index MP Integer
(1..32)
Index of value
range 1 to 32 of
the MAC-ehs
transport block
size as described
in Table 9.2.3.3.8
[15]
REL-8
NOTE 1: The IE is not signalled when the "PICH info" is present in "Secondary CCPCH system information" in
SIB5 and SIB6.
NOTE 2: HS-PDSCH channelisation codes are allocated contiguously from a signalled start code to a signalled stop
code, and the allocation includes both the start and stop code. If a value of Start code = 16 and Stop code
= 1 is signalled, a spreading factor of SF=1 shall be used for the HS-PDSCH resources.
NOTE 3: The timing between PICH and the paging associated HS-PDSCH is specified in [30]. UE should receives
the HS-PDSCH based on the timing specification.
10.3.6.36e
HS-SCCH system info
These parameters enable the UE to receive transmission on HSDPA cell resources, when the UE is not in CELL_DCH.
NOTE:
for FDD only.
Information Element/Group
name
Need Multi Type and
reference
DL Scrambling Code MD Secondary
scrambling
code
10.3.6.74
HS-SCCH Channelisation Code
Information
>HS-SCCH Channelisation
Code
NOTE:
MP
MP
1 to
Integer
(0..127)
(NOTE)
Semantics
description
DL Scrambling
code to be applied
for HS-DSCH and
HS-SCCH.
Default is same
scrambling code
as for the primary
CPICH.
Version
REL-7
REL-7
REL-7
UTRAN should use the first indexed HS-SCCH Channelisation code for the BCCH specific H-RNTI to
indicate system information change information. Otherwise UE behaviour is unspecified.
10.3.6.36ea HS-SCCH system info 1.28Mcps TDD
These parameters enable the UE to receive transmission on HSDPA cell resources on primary frequency or secondary
frequency, when the UE is not in CELL_DCH.
ETSI