Views
3 years ago

User Manual - OFFICIAL DISTRIBUTOR FOR SWITZERLAND info ...

User Manual - OFFICIAL DISTRIBUTOR FOR SWITZERLAND info ...

WWW.FOSCAM.COM FI8903W

WWW.FOSCAM.COM FI8903W /FI8904W/ FI8905W User Manual Figure 2.18 Multi-device window: The firmware inside the camera supports up to maximum of 9 cameras monitoring at the same time. You can add the other cameras in multi-device settings. OSD: OSD is used to add timestamp on the video. There are five character colors to choose from.. Add timestamp on record: Select this option if you wan to add a timestamp on record. Alarm sound off: Select this option, you cannot hear the beep alarm sound when the motion is detected. : When you enable motion alarm, the camera will record automatically and store the recording file to the folder you set. This icon is used to control the folder pop-up automatically. : When you click the icon, the camera video will play. : When you click the icon, the camera video will stop. : Click this icon to snap the picture. : Click the record icon. The camera will begin recording and store the .avi file to the folder you set. (Figure 3.3) Click again it will stop. For Firefox, Google Chrome and Safari You will see the picture like Figure 2.14 when you login the camera as a visitor. 2.5 For Operator For IE browser Click For Operator, the following screen will appear. (Figure 2.19) There are two resolution 640*480 and 320*240 Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 17

WWW.FOSCAM.COM FI8903W /FI8904W/ FI8905W User Manual Figure 2.19 Flip & Mirror: You can choose flip or mirror if you set up the camera in a special position. Mode: There are three modes. (50HZ, 60HZ and outdoor) Brightness and Contrast are also used to adjust the quality of the video. For Firefox, Google Chrome and Safari Click Live Video. There are several differences from IE and Firefox. In IE, there is a button for default all the settings. In Firefox, the snapshot button is under for operator. Add the another function; refresh camera parameters. (Figure 2.20) Figure 2.20 2.6 For Administrator For IE browser Click For Administrator. You will see the Device Status. It contains device ID, firmware version of the camera and other status of the camera. Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 18

User Manual - Antik Technology
User Manual [ver 4.00] - KOUKAAM, a.s.
Full user manual - O2
ECB300 User Manual - EnGenius Technologies
User Manual - Danets.com
AirLive WL-5460APv2_e9 User's Manual
ENS200 User Manual - EnGenius Europe
ENS202 User Manual - EnGenius Technologies
ENS500 User Manual - EnGenius Technologies
ESR9855G User Manual - EnGenius Technologies
AirLive WL-5470AP User Manual
AirLive WN-5000R User's Manual
user manual - Utax