Views
3 years ago

User Manual - OFFICIAL DISTRIBUTOR FOR SWITZERLAND info ...

User Manual - OFFICIAL DISTRIBUTOR FOR SWITZERLAND info ...

WWW.FOSCAM.COM FI8903W

WWW.FOSCAM.COM FI8903W /FI8904W/ FI8905W User Manual Enable Set Filename: You can set a name for the uploaded image when you enable the checkbox. If you select it, the uploaded image will be named after the filename you set. So the next image will cover the last image and the FTP Upload Folder will only have one uploaded image which named after the filename you set. Filename: Fill in a name for the uploaded image. This name is different from the alarm image. You cannot change the name of the alarm image. Upload Interval refers to the time between the current image and the next image. Click Submit to save these settings. Cick Test, the following screen displays if it succeeded. Figure 3.24 The following errors may occur: 1) Can not connect to the server. Check it the FTP Server is correct. 2) Network Error. Please try later. 3) Server Error. 4) Incorrect user or password. Please check the username and password. 5) Can not access the folder. Verify the folder exists and your account is authorized 6) Error in PASV mode. Verify the server supports PASV mode 7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT 8) Can not upload file. Verify your account is authorized Check parameters you filled in are correct or not. The format of image is similar to 00606E8C1930(sarah)_0_20100728114350_25.jpg Check if your FTP server supports this file name format. 3.13 Alarm Service Settings If you enable Motion Detect Armed, it will send mail alerts and upload images when motion has been detected. Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 33

WWW.FOSCAM.COM FI8903W /FI8904W/ FI8905W User Manual Figure 3.25 Motion trigger Figure 3.26 If motion is detected after you enable Motion Detect Armed, the Alarm Status will turn to Motion Detect Alarm. There are five alarm indicators: 1) The light turns red when motion is detected. Figure 3.27 2) A beep will sound when the light turns red. 3) The camera will record automatically for one minute after motion is detected. You can find the recording file in the folder which you set previously. (Figure 3.3) 4) Camera will send emails when motion is activated. If you want to receive images when motion is detected, you must set Mail Service Settings first. (Figure 3.18) Then set motion alarm as follows: Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 34

User Manual
User's Manual - AirLive
User Manual
User Manual - Belkin
User Manual
DNS-343 User Manual
User Manual - Newegg.com
Full user manual - O2
User's Manual - Airlive
User's Manual - AirLive
User Manual - Newegg.com
ECB150 User Manual - EnGenius Technologies
ENS200 User Manual - EnGenius Technologies
User's Manual - Portable Gear
User Manual - Buffalo
User Manual - Danets.com
User Manual - Newegg.com
EVR100 User Manual
ECB300 User Manual - EnGenius Technologies
sinaCAM User Manual
user manual - Utax
ENS200 User Manual - EnGenius Europe
ENS202EXT User Manual - EnGenius Technologies
User Manual - EnGenius Networks Singapore Pte Ltd
AirLive WN-5000R User's Manual
User Manual
User's Manual - Cowon
User Manual - Antik Technology
MoteConfig User's Manual - Crossbow Technology
User Manual PocketBook SURFpad 2