EV4181-HD Multiple Standard Waveform Monitor - Electronic Visuals

electronic.visuals.com

EV4181-HD Multiple Standard Waveform Monitor - Electronic Visuals

EV4181-HD

Multiple Standard

Waveform Monitor

HD – SD Serial

Digital & Analogue

component

Auto standard

detection

Component or RGB

Waveform display

Colour diff &

relative timing

displays

Line selection

Decoded outputs

Illegal colour

indication

16 character LCD

information display

Complete solution

for video signal

monitoring


How do you monitor the quality

of your video? The EV4181 is a

multiple input waveform monitor

that will automatically detect and

display almost any broadcast

standard of video signal whether

in HD or SD, Digital or Analogue.

The EV4181 has been designed

to be very easy to operate and

indicates clearly the selected

functions. Considerations other

than functionality were affordability.

The EV4181 provides the most

cost effective and complete

solution for today’s video signal

monitoring.

EV4181-HD

Multiple Standard

Waveform Monitor

SPECIFICATIONS:

DISPLAY:

10x8cm CRT with a P31(GH)

phosphor. Accelerating

potential 12kV

DISPLAY CONTROLS:

Intensity, Focus, LED Scale illum and

Trace align. Astig internally preset.

SIGNAL CONNECTIONS:

SDI in - HD SMPTE 292M, SD

SMPTE 259M, Reclocked out.

Analogue in - Three pairs loopthrough

connectors allow for

component or composite.

Return loss better than 40dB.

Converter outputs - YCbCr

outputs decoded from serial

digital input. One set for HD and

one set for SD.

Monitor outputs - RGB outputs for

general purpose monitoring.

VGA 15 pin connector.

DISPLAY MODES:

A,B or C selected: Each channel

individually displayed or overlayed

at desired line or field rate.

Bowtie for timing and

amplitude checks.

Vector display of channel B

horizontal and C vertical,

colour difference.

CALIBRATOR:

Precise amplitude checks set to

700mV and 525mV

SYNCHRONISATION:

Internal or external sync

source. Internal is from the

displayed A channel.

External reference may be

composite, black-and-burst or

mixed-sync signal with sync

amplitudes between 150mV

and 4V.

SWEEP RATES:

Vertical: 3, 2, 1 field. Horizontal:

3, 2, 1 lines.

X5 magnification increases 1 line

sweep rate to 1us/div and X50 to

100ns/div.

VERTICAL AMPLIFIER:

Frequency responce Flat25Hz to

30Mhz. LP-Low pass filter to IEEE

standard 205.

Lin - Linearity bandpass filter

centred on 500kHz for line non

linearity checks.

GBR - display signals for

gamut checking.

INFORMATION DISPLAY:

LCD 16 character back lit dot

matrix display.

POWER REQUIREMENTS:

90-250VAC. Consumption

40VA nominal

EV4181-HD

LINE SELECTION:

Displays and indicates selected line.

Electronic Visuals Limited

5 Boundary Way,

Woking, Surrey,

England GU21 5DH

Tel: +44 (0)1483 771663

Fax: +44(0)1483 750358

Email: info@electronic-visuals.com

Web site: www.electronic-visuals.com

In line with its policy of continuous product development,

Electronic Visuals reserve the right to modify specifications without notice.


penpal - HD HD Test Signal Generator

Features:

18 formats in 1080i, 1080P,

1080SF, 1035i and 720P.

32 video test patterns

including pathologic test

4 stereo pairs of AES

embedded audio

Operates from battery or

mains power

Test Patterns:

Sample of patterns

SMPTE HD Bars

100% Colour Bars

100% Colour Bars & Red

75% Colour Bars

SDI Check Field-Matrix

ARC/APM 4:3 & 16:9

Y Pulse & Bar

UV Pulse & Bar

5 Step Y Staircase

5 Step UV Staircase

Limited YUV Ramp

Shallow Y Ramp

Stationary Y Zone Plate

Moving Y Zone Plate

Moving Y Vertical Bar

Moving Y Diagonal Bar

60% Y Sweep (30MHz)

with Markers

60% UV Sweep (15MHz)

with Markers

Y Multiburst

UV Muliburst

PLUGE ON BLACK

Convergence

Tartan Bars

1 Field In 8 White Bar

White Field

Black Field

Red Field

Yellow Field

Green Field

Blue Field

Magenta Field

Cyan Field


Penpal-HD will produce 32

video test patterns in 18

HD standards each of which

can be combined with three

different audio tone settings.

A full specification broadcast

quality TSG ideal for checking

signal path integrity or to

determine system performance

and calibration.

This level of integration and

performance has been achieved

utilizing video processing and

Miniaturisation techniques optimised

for reduced power consumption.

10 bit all digital processing and

high stability crystals eliminate all

noise and distortion.

SPECIFICATIONS

Video standards supported

according to the SMPTE

292M and using YCbCr

colour encoding. This level of

integration and performance has

been achieved utilising video

processing and compression

techniques optimised for reduced

power consumption. The 10 bit

all digital processing and the high

stability crystals eliminate all noise

and distortion. The long lasting

battery life is a result of the latest

power supply technology.

PENPAL-HD

HD Test Signal Generator

Specifications: (SMTPE 292M)

Serial Digital Video Output Standards:

SMPTE 274M. 1080i/60, 1080i/59.94, 1080i/50, 1080p/30,

1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98,

1080sF/30, 1080sF/29.97, 1080sF/25, 1080sF/24,

1080sF/23.98.

SMPTE 296M. 720p/60, 720p/59.94, 720p/50.

SMPTE 260M. 1035i/60, 1035i/59.94.

VIDEO

Bit depth

10 bits

Interface

SMPTE 292M, 274M, 296M, 260M

Bit rate

1.485 Gbit/s

Output impedance

75 Ohm

Video Connector

BNC female

Return Loss

better than 15dB

Amplitude 800mV +/- 10%

Wideband Jitter

< 0.2UI

AES EMBEDDED AUDIO

Transport:

Precision

Sampling Frequency

Tones

Level:

Channels

BATTERY LIFE

Audio embedded into video according

to SMPTE 299

20 bits

48kHz locked to video

1kHz (nominal)

444Hz (nominal)

locked to sampling frequency

-20dBFS (full signal)

4 x stereo pairs (8 x channels)

3 hours continuous

POWER REQUIREMENTS

3 Volt Lithium Ion battery Type DL/CR123

Optional 3v AC

power adaptor

110/240 (+/- 10%) 50/60Hz

PENPAL-HD

MECHANICAL

Length

Diameter

Weight

172mm

22mm

175g (without battery)

ENVIRONMENTAL

Temperature 0 to 40 degrees C.

EMI/RFI

Complies with FCC, EU EMC Directive

Electronic Visuals Limited

5 Boundary Way,

Woking, Surrey,

England GU21 5DH

Tel: +44 (0)1483 771663

Fax: +44(0)1483 750358

Email: info@electronic-visuals.com

Web site: www.electronic-visuals.com

In line with its policy of continuous product development,

Electronic Visuals reserve the right to modify specifications without notice.


EV8024

HD/SD Up/Down

and Cross Converter

Digital and Analogue Outputs.

In -> SD 525 i 59.94

Out -> HD 1080 i 59.94

The EV8024 is an extremely versatile HD/SD tool featuring advanced 10-bit format conversion.

The EV8024 accepts dual-rate HD/SD SMPTE-292M and SMPTE-259M SDI inputs and can up or down convert

incoming signals and re-aspect to 4 x 3, 16 x 9 or user programmable aspect ratios. In addition, the EV8024 can cross

convert HD signals between 1080 and 720. Both digital and analogue HD/SD and XGA outputs are available. The

EV8024 can frame rate convert 24 frame video to 60 frames, move interlace to progressive and back. The unit also has

extensive user configurable graticules.

The EV8024 has 10-bit video processing, advanced de-interlacing and motion adaptation with 12-bit analogue encoding.

The EV8024 includes embedded audio pass through, with delay correction. The unit is controlled by the front

Control switches and LCD screen or controlled remotely via a PC interface.

Opions:

Redundant power supply, rack mounting and PC remote control.

Block Diagram

Specifications

Input

Dual rate HD-SDI SMPTE-292 and SD-SDI SMPTE-259M

Output

Two reclodced dual rate HD/SD input copies

two up/down/crass converted HD/SD outputs

HD: YPbPr, RGB or XGA w/fri/bi or H&V sync

SD: composite, component and V/C

Frequency Response

HD: Y:28MHz +/- 0.25 dB, Pb/Pr:13MHz +/- 0.25 dB

SD: 0-5.25 MHz +/- 0.25dB

Graticules

Four presets types: centre cross,

4x3 safe area, 4x3 full aperture, and 1 6x9 sale area

with user programmable size and thickness.

Colors: black, white, red, blue or user defined colour

Proc. Control

Digital control of gain, DC, saturation

& hue with user values saved and factory presets

Sync Output

Bi or tri-level and XGA H/V

Power

7-18VDC@ l5watts

Size

353 x 221 x 43mm Specifications subject to change without notice.

Features

• High quality up, down and cross

format conversion

• Single input auto standards detect

SMPTE 292/259M

• Two dual rate reclocked outputs

• Two digital outputs: HD/SD-SDI

• Two analogue outputs:

HD/SD-YPbPr, RGB or XGA output

• 10-bit video path and 12-bit analogue

encoding

• Full aspect ratio conversion and pan

controls

• Four user programmable graticules

• 3:2 frame rate and HD standards

conversion

• 100 user definable presets

• Supports sixteen channels of embedded

audio in all conversion

formats

• Automatic audio delay tracking with

user offset

• PC remote control software provided

• Adjustable output gain control

• Redundant power option

TOOLS

If only everything in broadcasting was this simple

Electronic Visuals Ltd Tel: +44(0)1784 483311 Email: info@electronic-visuals.com Web http: www.electronic-visuals.com


Broadcast 4 X 1 HD/SD SDI Switcher

Model No. EV2041-HD

4 x 1 HD/SD Switcher

Features

· Broadcast specification

· Full 1.5Gb/s bandwidth to handle

uncompressed HD signals

· Looping equalised inputs as standard

· Vertical interval switching

· Dual outputs as standard

· Automatic sample rate detection

on the inputs

· Re-clocked output

The EV2041-HD is a four input stand alone HD/SD routing matrix housed in a self contained small 180 x 190 x

40mm box. The standard unit comes with four Looping inputs, dual outputs and a local control panel.

There is an optional RS232C control module available if required. The EV2041-HD has been designed to full

SMPTE 292M, SMPTE 344M and SMPTE 259M specifications, and switches in the vertical interval but will

switch immediately if no reference signal is present. This unit employs automatic sample rate detection on

the input equalizers allowing a mixture of HD / SD signals in the same unit. Front panel LED’s indicate

signal presence and control activity.

Specification

VIDEO

Input impedance 75 Ohm

Nominal Input Level 800mv

INPUTS 4 x BNC Inputs

4 x BNC for lower loop through inputs

1 x BNC Reference

OUTPUTS

2 x BNC

POWER Mains Input IEC

Power supply 90 to 250V Integral

POWER consumption 15 Watts

OPERATING temperature 0 to +40 degrees Celsius

CASE Package Height Width Depth Weight

40mm 180mm 190mm 1Kg

CONNECTOR TYPES Video BNC

Optional RS232C control module D9 female

Power (mating supplied) IEC

Electronic Visuals Limited reserve the right to change or modify specifications without prior notice


HD

Dimensions:147 x 79 x 25mm

Dimensions:131 x 61 x 25mm

Dimensions:131 x 44 x 25mm

EVD4 EVD5 EVD10

HD SERIAL DIGITAL INTERFACE

Stand-alone signal converters available in both HD and SD. Encoders, Decoders, Distribution amps, Downconverters, Other.

Model

Function

Features

Specification Summary

EVD10A-HD

EVD10AV-HD

EVD10C-HD

EVD10-HDSDI

EVD10H-DA

EVD5H-HD

EVDP

10 bit A to D

10 bit A to D

Audio/Video

10 bit D to A

Downconverter

Distribution

Amp

Distribution

Amp

SDI to DVI-D

Low Cost, High Quality, 10-bit A/D Conversion.

Full Bandwidth Component HD RGB/YPbPr Input.

3 HD-SDI Outputs, SMPTE-292/296

External Dipswitch

Internal or External Sync.

High-quality SD/HD audio/video A/D converter.

SD component, composite or Y/C video input.

HD analogue component video input.

Four channel balanced analogue audio input.

3 SDI/HD-SDI with embedded audio outputs.

High Quality, Dual Rate HD/SD D/A Conversion.

Full Bandwidth HD RGB or YPbPr Output.

VGA style HD output using supplied adapter.

HD Sync Select Between Bi-level and Tri-Level.

4:3 Safe Area Graticule (HD).

HD SDI to SD SDI & Analogue YPbPr,RGB, Comp.

Dual rate HD-SDI/SDI Input.

10-bit Data Path, Multi-Point Interpolation.

Configurable for 16:9 or 4:3 Output.

4:3 Safe-Zone Graticule.

1 x 6 HD/SD Distribution Amplifier.

Six Separately Buffered Outputs.

125m HD cable equalization (1694 coax).

HD-SDI or SDI input, auto sensing.

Passes all ancillary data.

1 x 4 HD/SD Distribution Amplifier.

Auto Equalization.

Acts as a Low Cost Repeater.

Automatic Multi-Standard

Miniature Size

HD-SDI/SDI to DVI-D for LCD/Plasma monitors.

Auto adapts to any LCD monitor up to 1920x1200

Scaling engine for display of 4:3 or 16:9 content.

Scaling 1 to 1 for monitor configurations.

2 channel audio output.

Freq responce: Y + 0 - .5dB to 30Mhz

C +/- .25dB to 15Mhz

Formats: 1080i, 1035i, 1080psf, 720p

Multi Standard.

Power: 5V DC 4.5 Watts

Formats: 1080i, 1080psf, 1035i, 720p

HD component YPbPr, (SMPTE-274), BNC

Audio Inputs: 4-channel balanced, XLR

Video A/D: 12 bits, Audio A/D: 24 bits, 48 KHz

Power: 5 to 18VDC Regulated, 4 Watts

Frequency Response:

Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz

Format: Automatic Configuration

HD-SDI or SDI SMPTE 259/292/296.

Power: 5 to 18VDC Regulated, 4 Watts

Formats: 11035i,1080i,1080p,720p

Inputs HD-SDI/SDI dual-rate, SMPTE 292/296

Outputs SDI, SMPTE, 259M,

YPbPr, RGB, NTSC, PAL, YC, 3x BNC

Power: 5 to 18V DC, 6.5 Watts

Formats: 1.5Gb, 143, 177, 270, 360 Mb.

Inputs: 1 HD-SDI, SDI (SMPTE 259/292/296).

Bi-color LED indication of input lock and rate.

Outputs:Equalizing and re-clocking.

Power: 5 to 18V DC, 2.5 Watts.

Formats: 1.5Gb, 143, 177, 270, 360 Mb.

Inputs: 1 HD-SDI, SDI (SMPTE 259/292/296).

Bi-color LED indication of input lock and rate.

Outputs:Equalizing and re-clocking.

Power: 5 to 18V DC, 2.5 Watts.

Inputs formats: 1080i, 1080p, 720p, 525i, 625i

Outputs: DVI-D, Audio (2 ch RCA-style o/p’s),

2 Looping SDI outputs of the SDI inputs.

Maximum DVI Resolution 1920x1200 @ 60Hz

Power: 5 to 18VDC, 5 watts

ELECTRONIC VISUALS LTD.

Tel: +44(0)1481 771663 Fax: +44(0)1483 750358

Email: info@electronic-visuals.com Web: www.electronic-visuals.com

More magazines by this user
Similar magazines