MARINE CATALOG - Morse Industries
MARINE CATALOG - Morse Industries
MARINE CATALOG - Morse Industries
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NO. 25<br />
<strong>MARINE</strong> <strong>CATALOG</strong><br />
• On-Time Delivery<br />
• Knowledgeable Staff<br />
• Extensive Selection<br />
• Custom Components<br />
1.800.325.7513 www.morseindustries.com
1<br />
TABLE OF CONTENTS<br />
INTRODUCTION<br />
• History of Excellence • On-Time Shipping • In-House Design & Engineering • Just In Time<br />
Inventory • Your Partner In China & Beyond • Value Added Custom Fabrication, Assembly &<br />
Packaging • Knowledgeable Service • Product Variety • Consistent Quality • Distributor Program<br />
INTRODUCTION<br />
5<br />
15<br />
RUB RAILS<br />
• Vinyl Rigid Rub Rails with Stainless Overlaps • Vinyl Rigid Rub Rails • Vinyl Rigid Rub Rails with<br />
Flexible Inserts • Vinyl Rigid Rub Rails with Inserts • Stainless Steel Rub Rails • Aluminum Rub<br />
Rails with Vinyl Inserts • End Caps and Joint Covers<br />
HOUSEBOAT PRODUCTS<br />
• Aluminum Pipe & Tubing • Aluminum Connectors, End Caps & Pads • Aluminum Rub Rail with<br />
Vinyl Insert • Aluminum Moldings & Trims<br />
1<br />
21<br />
<strong>MARINE</strong> HARDWARE & TRIMS<br />
• Custom Products • Deck Cleats • Tow Ring • Gas Vents • Bow Chocks • Half Ovals • Angles<br />
• Trim and Edge Moldings • Flex Trim and Trim Seals • Weather Seals<br />
29<br />
TUBING / CANVAS HARDWARE<br />
• Stainless Steel Tubing • H2Ube Channel Tubing • Aluminum Tubing • Aluminum Square Fittings<br />
• Stainless Steel Fittings • Zamak Top Fittings • Nylon Fittings • Mooring Poles • Canvas Top Frames<br />
• Slide Tracks • Awning Rails and Vinyl Welt • Curtain Track System<br />
48<br />
TOWER PRODUCTS<br />
• Schedule 40 Pipe • Pipe Aligners • Aluminum Oval Tubing & Inserts • Stainless Steel & Aluminum<br />
Rod Holders • Aluminum Pins • Aluminum Pads • Aluminum Flat Bar<br />
57<br />
RAILING PRODUCTS<br />
• Stainless Steel Tubing • Stainless Steel Fittings • Stainless Steel Welding Pads<br />
63<br />
HINGES<br />
• Terminology • Continuous Hinges • Stainless Steel Stamped Hinges • Miscellaneous Hinges<br />
69<br />
CUSTOM PRODUCTS<br />
• Introduction • Aluminum Extrusions • Vinyl Extrusions • Stainless Cast Fittings<br />
• Fabrication-Stainless & Aluminum • Injection Molded Nylon Hardware • CNC Fabrication<br />
• Stainless Stamped Hardware • Assembling<br />
74<br />
REFERENCE MATERIALS<br />
• Shipping and Claims • Terms and Conditions • Decimal and Equivalents • Care and Cleaning of<br />
Stainless Steel<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
INTRODUCTION<br />
INTRODUCTION<br />
History of Excellence<br />
For nearly 30 years, <strong>Morse</strong> <strong>Industries</strong> has partnered with customers<br />
to build a company driven by customer needs. We work closely with<br />
our customers to fulfill requests in a timely and efficient manner<br />
while providing expert advice on our products and applications.<br />
Our goal is simple: To exceed your expectations by providing you<br />
convenient, reliable service.<br />
2<br />
On-Time Shipping<br />
Providing products when you expect them is the cornerstone of<br />
our business. Orders are tracked by date through all stages of the<br />
process and a double-check system is in place to ensure that your<br />
order is shipped on the day we promise. <strong>Morse</strong> also delivers on our<br />
own trucks within service areas. That means we take responsibility<br />
from our warehouse to your door.<br />
We take great care so you receive your orders in perfect condition.<br />
Items in your order may be individually poly-sleeved and packaged<br />
with paper interleaving to protect metal finishes. Items are usually<br />
boxed in quantities of 50 pieces, shrink-wrapped and placed on<br />
pallets to prevent damage.<br />
In House Design and Engineering<br />
Our in house design and engineering staff can take your concept<br />
and make it a reality. Whether it’s an established design, or an<br />
entirely new product, we work with our customers through every<br />
step of the product design process to ensure the highest quality end<br />
product. Using industry standard software such as AutoCad and<br />
SolidWorks ensures accurate electronic conversions of product<br />
drawings for production.<br />
Just in Time Inventory<br />
<strong>Morse</strong> has four convenient distribution facilities across the United<br />
States and can provide a tailored, ongoing inventory program for<br />
your company. We save you inventory holding costs by stocking<br />
your custom or standard stock items in one of our warehouses<br />
for immediate release as needed. Stocked items are available for<br />
same-day shipping.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
Your Partner in China and Beyond<br />
<strong>Morse</strong> has vendor resources across the globe allowing<br />
us to bring you the highest quality products at the best<br />
prices. We have staff members employed in China with extensive<br />
backgrounds in engineering, quality control, and<br />
sourcing. Because our staff are Chinese nationals, they<br />
understand the intricacies or doing business in a foreign<br />
country. Our employees act as your liaison, overseeing<br />
products through all stages of production, quality control,<br />
and finally shipment.<br />
‘Value Added’ Custom Fabrication,<br />
Assembly and Packaging<br />
Let us save you money by eliminating the costly labor<br />
necessary when doing your own fabrication. Our vendors<br />
have capabilities ranging from punching, slotting, drilling,<br />
CNC, welding, bending and more.<br />
<strong>Morse</strong> can be your one stop shop for fabrication, assembly<br />
and packaging through our ‘Value Added’ program. We<br />
will make the product, fabricate it to your specifications,<br />
source any additional items needed for the kit, assemble<br />
the contents and package it in such a way that you need<br />
only ship it to your customers. Our staff is there to assist<br />
you every step of the way.<br />
Knowledgeable Service<br />
Our highly trained employees know the products and consult<br />
with you one-on-one to be sure you are getting what<br />
you need. If you are interested in railing, we also have<br />
railing specialists on staff to help you with the process.<br />
They serve as your single point-of-contact by coordinating<br />
CAD drawings, engineering services, custom fabrication<br />
and delivery.<br />
If there ever is a problem, our team members are empowered<br />
to quickly work with you to agree on a satisfactory<br />
solution. Our business is focused on making your job<br />
easier.<br />
Product Variety<br />
<strong>Morse</strong> stocks a wide variety of popular products to help<br />
make your purchasing process simple. In addition to the<br />
products listed in these pages, <strong>Morse</strong> <strong>Industries</strong> can<br />
provide custom products to meet your needs. Our staff<br />
will assist in taking your order from design, to construction<br />
of dies and tooling, through production, fabrication,<br />
finishing and then follow through with the order until it<br />
reaches your receiving door.<br />
“It’s great to find a company that treats<br />
our business as a partnership. <strong>Morse</strong><br />
<strong>Industries</strong> does whatever it takes to<br />
make us happy and works with us to<br />
improve our business.”<br />
Glass Wholesalers, Inc.<br />
Houston TX<br />
INTRODUCTION<br />
3<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
INTRODUCTION<br />
Consistent Quality<br />
Our customers expect consistent, high-quality products every time<br />
they order. <strong>Morse</strong> <strong>Industries</strong> has a quality assurance system in<br />
place that ensures your orders match the approved drawings and<br />
the specified finish before they are shipped to your facility.<br />
Therefore, you can rely on <strong>Morse</strong> <strong>Industries</strong> to provide the product<br />
you ordered on the delivery date promised by our customer support<br />
specialists.<br />
4<br />
Distributor Program<br />
Our distributors are partners for our success. The <strong>Morse</strong> <strong>Industries</strong><br />
Distributor Program consists of selling materials and a lead support<br />
program to help distributors sell more effectively. If you are interested<br />
in selling <strong>Morse</strong> products, contact us for a free information<br />
packet.<br />
Visit <strong>Morse</strong>industries.com for:<br />
• Updated catalog and product information<br />
• Recent <strong>Morse</strong> <strong>Industries</strong> news and events<br />
• Product specifications and CAD drawings<br />
• How-to articles and best practices documents<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RUB RAILS<br />
“<strong>Morse</strong> <strong>Industries</strong> is the most proactive<br />
company we work with. Orders ship as<br />
promised and problems are solved before<br />
they happen.”<br />
RUB RAILS<br />
Seaswirl Boats<br />
seaswirl.com<br />
• Vinyl Rigid Rub Rails with<br />
Stainless Overlaps<br />
• Vinyl Rigid Rub Rails<br />
• Vinyl Rigid Rub Rails with<br />
Flexible Inserts<br />
• Vinyl Rigid Rub Rails with Inserts<br />
• Stainless Steel Rub Rails<br />
• Aluminum Rub Rails with Vinyl<br />
Inserts<br />
• End Caps and Joint Covers<br />
5<br />
1.800.325.7513 www.morseindustries.com
RUB RAILS<br />
6<br />
VINYL RIGID RUB RAILS WITH STAINLESS OVERLAPS<br />
Rub Rails<br />
Standard colors of <strong>Morse</strong> <strong>Industries</strong> Rub Rails include black, white and grey in gloss or matte finish. A wide variety of<br />
custom colors are also available. Stainless steel overlaps are sold separately in a polished and or buffed finish.<br />
shown on<br />
page 12. If you don’t see what you need, please inquire for special orders in mill run quantities.<br />
1.500”<br />
1.260” 1.375”<br />
2.500” 1.250” 1.910” .750” 2.250” 1.250”<br />
V21-8073 (mill run only)<br />
S11-467S Insert<br />
V21-0903<br />
S11-451S Insert<br />
V21-1063<br />
S11-4670 Insert<br />
1.145”<br />
1.400”<br />
1.000”<br />
1.970” 1.000” 1.515” .750” 2.000” 1.000”<br />
V21-1039<br />
S11-4650 Insert<br />
V21-1025 (mill run only)<br />
S11-4510 Insert<br />
V21-9502 (mill run only)<br />
S11-4650 Insert<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
AINLESS VINYL OVERLAPS RIGID RUB RAILS WITH STAINLESS OVERLAPS<br />
Rub Rails<br />
black, white Standard grey colors in gloss of or <strong>Morse</strong> matte <strong>Industries</strong> finish. A wide Rub Rails variety include of<br />
black, white and grey in gloss or matte finish. A wide variety of<br />
aps are sold custom separately colors in a are polished also available. or buffed Stainless finish. steel overlaps are are sold separately in in a a polished and or buffed finish.<br />
shown on<br />
page 12. If you don’t see what you need, please inquire for special orders in mill run quantities.<br />
RUB RAILS<br />
.385<br />
.720”<br />
.585<br />
.385”<br />
.590” .585<br />
1.375<br />
.750 1.600” .750” .7501.375” .750”<br />
1.250” 1.375<br />
.750”<br />
7<br />
V21-7562<br />
-4510 Insert<br />
-3510 Insert<br />
V21-9613<br />
S11-4510 Insert<br />
S11-3510 Insert<br />
V21-8006<br />
S11-4510 Insert<br />
S11-3510 Insert<br />
V21-7562<br />
S11-4510 Insert<br />
S11-3510 Insert<br />
V21-9648<br />
V21-8006<br />
S11-4510 Insert<br />
S11-3510 Insert<br />
In addition to stock items, we have the<br />
capability to design and produce custom<br />
solutions to fit your needs such as the<br />
pre-formed Rub Rail below.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RUB RAILS<br />
VINYL RIGID RUB RAILS<br />
Rub Rails<br />
Standard<br />
Standard colors<br />
colors<br />
of<br />
of<br />
<strong>Morse</strong><br />
<strong>Morse</strong><br />
<strong>Industries</strong><br />
<strong>Industries</strong><br />
Rub<br />
Rub<br />
Rails<br />
Rails<br />
include<br />
include<br />
black,<br />
black,<br />
white<br />
white<br />
and<br />
and<br />
grey<br />
grey<br />
in gloss<br />
in gloss<br />
or matte<br />
or matte<br />
finish.<br />
finish.<br />
A wide<br />
A<br />
variety<br />
wide variety<br />
of custom<br />
colors<br />
of<br />
custom colors<br />
are<br />
are<br />
also<br />
also<br />
available.<br />
available.<br />
If you don’t see what you need, please inquire for special orders in mill run quantities.<br />
.400” .600”<br />
.840” .860”<br />
1.010”<br />
1.500”<br />
1.900”<br />
8<br />
V21-0460<br />
(mill run only)<br />
2.500”<br />
1.870”<br />
V21-0456<br />
(mill run only)<br />
.700”<br />
V21-0457<br />
(mill run only)<br />
1.370”<br />
V21-0458<br />
(mill run only)<br />
.800”<br />
3.640”<br />
3.020”<br />
2.300”<br />
1.560”<br />
V11-0840<br />
Flexible Rub Rail<br />
(mill run only)<br />
V21-0188<br />
(mill run only)<br />
V21-0940<br />
(mill run only)<br />
V21-0945<br />
(mill run only)<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
VINYL RIGID RUB RAILS<br />
Rub Rails<br />
Standard colors of <strong>Morse</strong> <strong>Industries</strong> Rub Rails include black, white and grey in in gloss or or matte finish. A wide A wide variety of<br />
of custom colors colors are are also also available. available. If you don’t see what you need, please inquire for special orders in mill run<br />
quantities.<br />
RUB RAILS<br />
.790”<br />
1.000”<br />
.300”<br />
.625”<br />
.300<br />
.240”<br />
.240<br />
1.860” 1.810” 1.440” 1.450”<br />
1.110”<br />
9<br />
V21-3670<br />
(mill run only)<br />
V21-9177<br />
V21-3671 V25-2019<br />
V25-0474<br />
(mill run only)<br />
(mill run only)<br />
4.000”<br />
6.000”<br />
2.000”<br />
3.000”<br />
V21-2056<br />
S11-470S Insert<br />
(mill run only)<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RUB RAILS<br />
10<br />
VINYL RIGID RUB RAILS WITH FLEXIBLE INSERTS<br />
Rub Rails<br />
Standard colors of <strong>Morse</strong> <strong>Industries</strong> Rub Rails include black, white and grey in gloss or matte finish. A wide variety<br />
Standard colors of <strong>Morse</strong> <strong>Industries</strong> Rub Rails include black, white and grey in gloss or matte finish. A wide variety of<br />
of custom colors are also available. Vinyl Inserts are sold separetely in various colors. If you don’t see what you need,<br />
custom colors are also available. Vinyl Inserts are sold separately in various colors.<br />
please inquire for special orders in mill run quantities.<br />
Locking Insert Designs<br />
Locking Insert Rub Rails are <strong>Morse</strong> exclusive designs. The locking inserts are easy to install while ensuring a tight fit under extreme high<br />
temperature conditions.<br />
.875” 1.000”<br />
1.500”<br />
1.500”<br />
V21-2054 V21-2054 (mill run only)<br />
V12-2006 Locking Insert<br />
V21-2007 V21-2007 (mill run only)<br />
V12-2006 Locking Insert<br />
Standard Insert Designs<br />
.687” .730”<br />
1.260” 1.260”<br />
V21-9506<br />
V12-0303 Insert<br />
.562”<br />
V21-2197 (mill run only)<br />
V12-0303 Insert<br />
.930”<br />
.920”<br />
1.000”<br />
1.270”<br />
1.500”<br />
V21-0776<br />
V12-0342 Insert<br />
V21-7099 (mill run only)<br />
V12-0303 Insert<br />
V21-9501<br />
V12-0303 Insert<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
VINYL RIGID RUB RAILS WITH FLEXIBLE INSERTS<br />
Rub Rails<br />
Standard colors of <strong>Morse</strong> <strong>Industries</strong> Rub Rails include black, white and grey in in gloss or or matte finish. A wide A wide variety of<br />
of custom colors are are also also available. Vinyl Vinyl Inserts are are sold sold separately separetely in in various colors. If you don’t see what you need,<br />
please inquire for special orders in mill run quantities.<br />
RUB RAILS<br />
.630”<br />
.670”<br />
.695”<br />
1.475” 1.500” 1.485” .565”<br />
11<br />
V21-7605 (mill run only)<br />
V12-7930 Solid Color Insert<br />
V12-7606 Pinstripe Insert<br />
V21-8024<br />
V12-7930 Solid Color Insert<br />
V12-7606 Pinstripe Insert<br />
V21-9563<br />
V12-9538 Insert<br />
.860”<br />
.740”<br />
1.875” .565”<br />
1.500”<br />
V21-9537<br />
V12-9538 Insert<br />
V21-9557 V21-9557 (mill run only)<br />
V12-4097 Insert<br />
.625”<br />
1.500”<br />
V21-9559 V21-2559 (mill run only)<br />
V12-4097 Insert<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RUB RAILS<br />
12<br />
STAINLESS STEEL RUB RAILS<br />
Rub Rails<br />
Made from highly polished stainless steel type 304 or 316. Rub Drilled Rail and is drilled countersunk and countersunk on 6” centers on 6” in centers 12’ lengths. in 12’ lengths. Custom<br />
formed Custom pieces formed are pieces also are available. also available. See page 7 for pre-bent stainless rub rail possibilities.<br />
Hollow Back Half Oval<br />
Part Number Width DR/CS Size Thickness<br />
S11-3510 3/4” #8 .062<br />
S11-3650 1” #8 .062<br />
S11-4500 1/2” #8 .077<br />
S11-4510 3/4” #8 .077<br />
S11-4650 1” #10 .077<br />
S11-4670 1 1/4” #10 .077<br />
S11-4690 1 1/2 ”<br />
#10 .077<br />
S11-4700 2” #10 .077 (drilled to specs 316L only)<br />
S11-4710 2 1/2” #10 .077 (drilled to specs 316L only)<br />
Solid Back Half Oval<br />
Part Number Width DR/CS Size Thickness<br />
S11-450S 1/2” #10 5/32”<br />
S11-451S 3/4” #10 3/16”<br />
S11-465S 1” #12 1/4”<br />
S11-467S 1 1/4” #12 1/4”, 5/16”<br />
S11-469S 1 1/2 ”<br />
#12 3/8” (20’ 316L only)<br />
S11-470S 2” #14 1/2” (20’ 316L only)<br />
Rub Strakes<br />
Part Number Width Length Hole Size<br />
S11-1700P 3/4” 8”, 12” #8<br />
18”, 24”<br />
Rub Rail Ends<br />
Part Number Width Length Hole Size<br />
S11-2000P12 3/4” 12” #8<br />
S11-2001P12 1” 12” #10<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ALUMINUM RUB RAILS WITH VINYL INSERTS<br />
Rub Rails<br />
Aluminum Rub Rails are drilled and and countersunk for to #8 your screws specifications. 6” centers. Available Available in various in various anodized anodized finishes finishes and<br />
and lengths lengths to meet to meet your your specifications. Vinyl Vinyl Inserts Inserts sold sold separately separately in various in various colors colors and and lengths. lengths.<br />
.500” .500” .470” .625”<br />
RUB RAILS<br />
13<br />
.940” 1.310” 1.120” 1.125”<br />
A11-0342 A11-0342 (mill run only)<br />
V12-0342 Insert<br />
Drilled and countersunk<br />
#6 screws on<br />
6” centers<br />
A12-0306 A12-0306 (mill run only)<br />
V12-0342 Insert<br />
A12-0304 (mill run only)<br />
V12-0342 Insert<br />
A11-0347 A11-0347 (mill run only)<br />
V12-0342 Insert<br />
.875” .905”<br />
1.310” 1.375”<br />
A12-0303 A12-0303 (mill run only)<br />
V12-0303 Insert<br />
A12-0305 (mill run only)<br />
V12-0303 Insert<br />
.609”<br />
.547”<br />
1.453”<br />
1.612”<br />
A12-0038 (mill run only)<br />
V12-0338 Insert<br />
A12-1351 (mill run only)<br />
V12-8088 Insert<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RUB RAILS<br />
END CAPS AND JOINT COVERS<br />
Rub Rails<br />
<strong>Morse</strong> <strong>Industries</strong> can help design and create custom End Caps and Joint Covers for any of the rub rails we provide.<br />
They are available in vinyl, stainless steel and aluminum in a variety of colors and finishes. We can even emboss your<br />
logo on a custom End Cap.<br />
End Caps<br />
Available in in black and and white. white. Common Stock components are shown below, and many more more styles styles and and colors colors are are available. available. Please inquire for availability.<br />
Part Number<br />
14<br />
F90-0002<br />
F90-0001<br />
F90-0489<br />
F90-0522<br />
Joint Covers<br />
F90-0002 F90-0001 F90-0489 F90-0522<br />
Available in in black and white. Common Stock components are shown below, and many more styles and and colors are are available. Please inquire for availability.<br />
Part Number<br />
F90-8029<br />
F90-0525<br />
Stainless Steel Joint Covers and End Caps<br />
F90-8029 F90-0525<br />
Made from 316L stainless steel, joint covers and end caps can be designed to your specifcations. FEC-5007 is a standard end cap made to fit<br />
over V21-9613 rub rail with the S11-3510 stainless steel overlay. Available with or without custom logo.<br />
Custom Component<br />
<strong>Morse</strong> <strong>Industries</strong> can produce<br />
custom splice caps, joint covers<br />
and end caps. Call for details.<br />
FEC-5007L (left side)<br />
FEC-5007R (right side)<br />
Fits V21-9613 rub rail with<br />
S11-3510 stainless steel overlay.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HOUSEBOAT PRODUCTS<br />
HOUSEBOAT PRODUCTS<br />
15<br />
• Aluminum Pipe<br />
& Tubing<br />
• Aluminum Connectors,<br />
End Caps & Pads<br />
• Aluminum Rub Rail<br />
with Vinyl Insert<br />
• Aluminum Moldings<br />
& Trims<br />
1.800.325.7513 www.morseindustries.com
HOUSEBOAT PRODUCTS<br />
ALUMINUM OVAL TUBING, END CAPS & CONNECTORS<br />
Houseboat Products<br />
Aluminum Oval Tubing<br />
Available in mill finish in 25 ft. lengths, and 180 grit brushed & bright anodized hot water seal in 24 ft. lengths.<br />
Part Number A B<br />
A45-8321 1” 3”<br />
A<br />
16<br />
NEW<br />
B<br />
Aluminum Oval Tubing End Cap<br />
Available in 180 grit linear brushed & bright anodized hot water seal.<br />
Part Number<br />
Size<br />
FHB-10173 1” x 3”<br />
NEW<br />
Aluminum Oval Tubing 45 Degree Connector<br />
Available in 180 grit linear brushed & bright anodized hot water seal.<br />
Part Number<br />
Size<br />
FHB-10174 1” x 3”<br />
NEW<br />
Aluminum Oval Tubing Straight Connector<br />
Available in 180 grit linear brushed & bright anodized hot water seal.<br />
Part Number<br />
Size<br />
FHB-10175 1” x 3”<br />
NEW<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ALUMINUM PIPE & BASE PAD<br />
Houseboat Products<br />
Schedule 40 Aluminum Pipe<br />
Available in mill finish in 25 ft. lengths, and 180 grit brushed & bright anodized hot water seal in 24 ft. lengths.<br />
Part Number O.D. Wall Thickness<br />
A45-8322 1” .133”<br />
A45-8323 1 1/4” .140”<br />
Wall<br />
Thickness<br />
O.D.<br />
HOUSEBOAT PRODUCTS<br />
NEW<br />
17<br />
Aluminum Railing Base Pad<br />
Available in 180 grit radial brushed & bright anodized hot water seal.<br />
Part Number Size Holes<br />
FHB-10172 4” 4<br />
NEW<br />
Image courtesy of Sumerset Houseboats<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HOUSEBOAT PRODUCTS<br />
ALUMINUM RUB RAIL & TRIMS<br />
Houseboat Products<br />
Aluminum Rub Rail with Vinyl Insert<br />
Aluminum Rub Rail is drilled and countersunk for #8 screws on 6” centers. Available in clear anodize finish in 16 ft. lengths. Vinyl insert available<br />
in gloss black in 200 ft. coils.<br />
1.233”<br />
2.847”<br />
18<br />
Aluminum Angle<br />
White powder coat finish in 12 ft. lengths.<br />
Part Number A B<br />
A50-0903 1” .0625”<br />
A50-1425 1 1/2” .0625”<br />
NEW<br />
A11-0350<br />
V12-2301 Insert<br />
A<br />
NEW<br />
B<br />
Image courtesy of Sumerset Houseboats<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ALUMINUM MOLDINGS & TRIMS<br />
Houseboat Products<br />
Aluminum T Molding<br />
White powder coat finish in 12 ft. lengths.<br />
Part Number<br />
A50-0306<br />
.850”<br />
1.0”<br />
HOUSEBOAT PRODUCTS<br />
NEW<br />
Aluminum Round Face Trim Molding<br />
Drilled and countersunk 6” center to center for #4 screws in clear anodized finish; 12 ft. lengths.<br />
Part Number<br />
A50-9616<br />
.125”<br />
19<br />
.556”<br />
Aluminum Half Oval Trim Molding<br />
Drilled and countersunk 11.5” center to center for #6 screws in white powder coat finish; 8 ft. lengths.<br />
Part Number<br />
NEW<br />
A51-0110<br />
1.980”<br />
NEW<br />
.243”<br />
Aluminum Cove Molding<br />
Drilled and countersunk 6” center to center for #6 screws in white powder coat finish; 12 ft. lengths.<br />
Part Number<br />
A50-8548<br />
.717”<br />
.193”<br />
NEW<br />
Aluminum Overlap Trim Molding<br />
Drilled and countersunk 6” center to center for #8 screws in clear anodized finish; 12 ft. lengths.<br />
.344”<br />
Part Number<br />
A11-0154<br />
1.180”<br />
.374”<br />
NEW<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HOUSEBOAT PRODUCTS<br />
ALUMINUM MOLDINGS & TRIMS<br />
Houseboat Products<br />
Aluminum Corner Piece<br />
Radius edge, white powder coat finish in 8 ft. lengths.<br />
Part Number<br />
A50-9329<br />
20<br />
Aluminum Drip Molding<br />
White powder coat finish in 12 ft. lengths.<br />
Part Number<br />
A50-8019<br />
NEW<br />
1.5”<br />
3.5”<br />
NEW<br />
1.75”<br />
Image courtesy of Sumerset Houseboats<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
<strong>MARINE</strong> HARDWARE & TRIMS<br />
“Our number one issue with suppliers is<br />
on-time delivery. <strong>Morse</strong> <strong>Industries</strong> consistently<br />
delivers our orders every two weeks<br />
and their salespeople are very responsive<br />
when our needs arise.”<br />
<strong>MARINE</strong> HARDWARE & TRIMS<br />
21<br />
Kal Kustom Enterprises<br />
• Custom Products<br />
• Deck Cleats, Tow Ring,<br />
Gas Vents and Bow Chocks<br />
• Half Ovals<br />
• Angles<br />
• Trim and Edge Moldings<br />
• Flex Trim and Trim Seals<br />
• Weather Seals<br />
1.800.325.7513 www.morseindustries.com
<strong>MARINE</strong> HARDWARE & TRIMS<br />
custom stainless steel AND ALUMINUM PRODUCTS<br />
Hardware and Trims<br />
At <strong>Morse</strong> <strong>Industries</strong>, our Sales and Design consultants are ready to help you create the perfect custom product<br />
for your application. We’ll work with you through the design and specification process, to construction of<br />
dies and tooling, through production, fabrication and finishing right up until it reaches your door.<br />
22<br />
Some of the custom things we do:<br />
• Aluminum Extrusions<br />
• Vinyl Extrusions<br />
• Stainless Steel Tubing<br />
• Stainless Cast Fittings<br />
• Stainless Stamped Hardware<br />
• Injection Molded Nylon Hardware<br />
• CNC Fabrication<br />
• Pre-formed Stainless Steel Rub Rails<br />
))<br />
If you don’t see it, please ask us.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
Deck Cleats, TOW RING, GAS VENTS & Bow Chocks<br />
Hardware and Trims<br />
Herreshoff Cleats<br />
Investment cast, hollow-base Herreshoff Cleats are made from 316 stainless steel and provide an elegant design that is lightweight and strong.<br />
Part Number Size Fastener Size<br />
FHC-1006 6” cleat 1/4”<br />
FHC-1008 8” cleat 1/4”<br />
FHC-1010 10” cleat 5/16”<br />
FHC-1012 12” cleat 5/16”<br />
FCHD-1008 8” heavy duty 1/4”<br />
FCHD-1010 10” heavy duty 5/16”<br />
FCHD-1012 12” heavy duty 5/16”<br />
<strong>MARINE</strong> HARDWARE & TRIMS<br />
23<br />
Water Resistant, Self Locking, Pull Ups Cleats<br />
Innovative self locking pull up cleast stays locked in the up or down position while a full length nylon bushing protects the mechanism from water<br />
leakage and eliminates rattling. Inquire for stock availability. Custom logo branding capabilities available.<br />
Part Number<br />
Size<br />
FPC-4500 4.5”<br />
FPC-6000 6”<br />
Ski Tow Ring<br />
Ski Tow Ring features a wide mounting ring with all washers and nuts needed for installation.<br />
Part Number Size Stud Length<br />
FST-7769 3/8” x 3” 3”<br />
NEW<br />
Custom branding available.<br />
Flush Gas Vents<br />
Part Number<br />
Description<br />
F16-2002 90 degree gas vent<br />
F16-2000 Straight gas vent<br />
Skene Bow Chocks<br />
Made from 316 cast stainless steel.<br />
Part Number<br />
FBC-3014<br />
FBC-3015<br />
Straight Bow Chocks<br />
Description<br />
Made from 316 cast stainless steel.<br />
Part Number<br />
FBC-3010<br />
FBC-3011<br />
4 1/2” long for 1/2” line<br />
6” long for 3/4” line<br />
Description<br />
5” long for 5/8” line<br />
6” long for 3/4” line<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
<strong>MARINE</strong> HARDWARE & TRIMS<br />
Half Ovals<br />
Hardware and Trims<br />
Aluminum Half Ovals with Concave Backs<br />
Drilled and countersunk for #6 screws on 6” centers. Available with clear anodized finish in 12’ lengths.<br />
1/4”<br />
3/16”<br />
11/64”<br />
11/64”<br />
24<br />
1/2”<br />
3/4”<br />
1”<br />
1 1/2”<br />
A51-0102<br />
(mill run only)<br />
A51-0104<br />
A51-0106<br />
Aluminum Half Ovals with Solid Backs<br />
A51-0109<br />
(mill run only)<br />
Drilled and countersunk for #6 screws on 6” centers. Available with clear anodized finish in 12’ lengths.<br />
5/32”<br />
3/16”<br />
3/4”<br />
1”<br />
A50-0195<br />
(mill run only)<br />
A50-0197<br />
(mill run only)<br />
Rigid Vinyl Ovals with Solid Backs<br />
Available in a variety of colors, finishes (gloss or matte) and lengths to meet your specifications.<br />
.860”<br />
.400”<br />
.600”<br />
.840”<br />
1.010”<br />
1.500”<br />
1.900”<br />
2.500”<br />
V21-0460<br />
(mill run only)<br />
V21-0456<br />
(mill run only)<br />
V21-0457<br />
(mill run only)<br />
V21-0458<br />
(mill run only)<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ANGLES<br />
Hardware and Trims<br />
Vinyl Angles<br />
Available in a variety of colors.<br />
<strong>MARINE</strong> HARDWARE & TRIMS<br />
25<br />
.570”<br />
.810”<br />
.840”<br />
1.110”<br />
.255”<br />
V25-9124<br />
(mill run only)<br />
.280”<br />
V25-0758<br />
(mill run only)<br />
.840”<br />
V25-0240<br />
(mill run only)<br />
.240”<br />
V25-0474<br />
1.200”<br />
1.450”<br />
1.500”<br />
.980”<br />
V25-3604<br />
(mill run only)<br />
.300”<br />
V25-2019<br />
(mill run only)<br />
1.500”<br />
V25-0870<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
<strong>MARINE</strong> HARDWARE & TRIMS<br />
Trim and Edge Moldings<br />
Hardware and Trims<br />
Aluminum Gutter Molding<br />
Drilled and countersunk for #6 screws on 6” centers. Available in 12’ lengths.<br />
.750”<br />
.875”<br />
26<br />
.560”<br />
A51-0149<br />
.718”<br />
A51-0219<br />
Aluminum Edge Moldings<br />
Drilled and countersunk for #5 screws on 6” centers. Available with a clear anodized finish in 12’ lengths.<br />
1/4”<br />
1/4”<br />
1/4”<br />
1/4”<br />
1/4”<br />
1/4”<br />
1/4”<br />
1/4”<br />
5/16” 1/2”<br />
5/8”<br />
3/4”<br />
13/16”<br />
7/8”<br />
1 1/16”<br />
1 1/4”<br />
A50-0271<br />
(mill run only) A50-0272<br />
(mill run only)<br />
35/64”<br />
A50-0273<br />
23/32”<br />
A50-0275<br />
A50-0274<br />
(mill run only)<br />
35/64”<br />
A51-0144<br />
(#6 screws) A51-0145<br />
A50-0276<br />
(mill run only)<br />
1 1/2”<br />
1”<br />
13/16”<br />
1/2”<br />
3/32”<br />
A50-0328<br />
(#6 screws)<br />
A50-0226<br />
(mill run only)<br />
A50-0326<br />
(#6 screws)<br />
(mill run only)<br />
A51-0158<br />
(mill run only)<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
Flex Trim and Trim Seals<br />
Hardware and Trims<br />
Flex Trim<br />
Flexible PVC Trim with corrosion resistant aluminum clips to retain permanent grip on difficult materials and compound curves.<br />
Applications include fiberglass, sheet-metal and plastic panels.<br />
• Caps on any raw edge: Fiberglass, metal, glass and acrylic.<br />
• Economical and easy to install.<br />
• Internal aluminum clips secure trim with corrosion resistance.<br />
• Available in black, white or off-white in reels of 250’.<br />
*500 foot minimum may apply.<br />
Part Number Color A B<br />
V30-100B1/8* Black 9/16” 1/8”<br />
V30-100W1/8 White 9/16” 1/8”<br />
V30-100B5/32 Black 1/2” 5/32”<br />
V30-100W5/32 White 1/2” 5/32”<br />
V30-100B1/4 Black 1/2” 1/4”<br />
V30-100W1/4 White 1/2” 1/4”<br />
V30-1375B1/8* Black 3/4” 1/8”<br />
V30-1375G1/8* Gray 3/4” 1/8”<br />
V30-1375W1/8 White 3/4” 1/8”<br />
V30-1375B1/4* Black 11/16” 1/4”<br />
V30-1375G1/4* Gray 11/16” 1/4”<br />
V30-1375W1/4 White 11/16” 1/4”<br />
V30-1375B3/8 Black 5/8” 3/8”<br />
V30-1375W3/8* White 5/8” 3/8”<br />
V30-1375B1/2 Black 19/32” 1/2”<br />
V30-1375W1/2 White 19/32” 1/2”<br />
Flexible<br />
Aluminum<br />
Support<br />
A<br />
PVC Coating<br />
B<br />
<strong>MARINE</strong> HARDWARE & TRIMS<br />
27<br />
Trim Seal<br />
Flexible PVC Trim with corrosion resistant aluminum clips to retain permanent grip on difficult materials and compound curves. An EPDM sponge<br />
bulb is attached for sealing or insulating compartments, doors, hatches and more.<br />
• Onless otherwise specified, bulb is in the “A” location.<br />
• Available in black, white or off-white in reels of 250’. Specify color when ordering. 500 foot minimum may apply.<br />
• Trim Seals available as special order items.<br />
A B C<br />
.560” .125” .375”<br />
.530” .190” .375”<br />
.500” .250” .435”<br />
.625” .375” .435”<br />
.595” .500” .435”<br />
.500” .250” .625”<br />
.625” .375” .625”<br />
C<br />
Flexible<br />
Aluminum<br />
Support<br />
PVC Coating<br />
EPDM Sponge Bulb<br />
Bulb Location:<br />
“A” is standard<br />
A<br />
B<br />
C<br />
B<br />
A<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
<strong>MARINE</strong> HARDWARE & TRIMS<br />
28<br />
Weather Seals<br />
Hardware and Trims<br />
<strong>Morse</strong> <strong>Industries</strong> Weather Seal is made of durable, flexible sponge rubber with a heavy-duty self-adhesive backing.<br />
Weather Seal prevents leaks and stops rattles. Replace old seals around hatch frames, door frames and live wells. Use<br />
Weather Seal and Hatch Tape anywhere you need a weather-tight compartment. 500’ minimum special order only.<br />
Weather Seals<br />
Black or white sponge rubber. Special order only.<br />
Part Number Height Width<br />
V30-0113B 3/16” 3/8”<br />
V30-0202B 1/2” 1/2”<br />
V30-1333B 7/32” 3/8”<br />
V30-0109B 23/64” 39/64”<br />
V30-0135B 9/16” 3/4”<br />
V30-0113B<br />
V30-0202B<br />
V30-1333B<br />
V30-0109B<br />
V30-0135B<br />
Hatch Tape<br />
Medium density closed black cell foam. Special order only. 500 foot minimum.<br />
Part Number Height Width<br />
V30-0744B 1/8” 3/4”<br />
V30-0748B 1/4” 3/4”<br />
V30-0744B<br />
V30-0748B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
• Stainless Steel Tubing<br />
• H2Ube Channel Tubing<br />
• Aluminum Tubing<br />
• Aluminum Square Fittings<br />
• Stainless Steel Fittings<br />
• Zamak Top Fittings<br />
• Nylon Fittings<br />
• Mooring Poles<br />
• Canvas Top Frames<br />
• Slide Tracks<br />
• Awning Rails and<br />
Vinyl Welt<br />
• Curtain Track System<br />
TUBING / CANVAS HARDWARE<br />
29<br />
“We believe in the quality of <strong>Morse</strong><br />
<strong>Industries</strong> stainless steel fittings and<br />
tubing is a very important part of our<br />
award-winning success.”<br />
Barrett Enclosures<br />
barrettenclosures.com<br />
1.800.325.7513 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
30<br />
STAINLESS STEEL TUBING<br />
Tubing / Canvas Hardware<br />
Round Stainless Steel Tube<br />
<strong>Morse</strong> <strong>Industries</strong> maintains an extensive inventory of 304 and 316L ornamental stainless<br />
steel tubing (ASTM A554 TIG Weld). Tubing is available in 20’ and 24’ lengths with<br />
heavy-duty packaging materials to ensure the best possible protection in transit.<br />
Standard finishes include: as welded (mill finish), 600 grit (polished and buffed) and linear buff (#8 mirror finish). Tubing stock on hand can vary.<br />
Call <strong>Morse</strong> <strong>Industries</strong> for ship times. *Asterisked items are regular stock items.<br />
O.D.Size<br />
Wall Thickness<br />
1/2”<br />
5/8”<br />
3/4”<br />
7/8”<br />
1”<br />
1 1/8”<br />
1 1/4”<br />
1 3/8”<br />
1 1/2”<br />
1 5/8”<br />
1 3/4”<br />
1 7/8”<br />
1.900”<br />
2”<br />
2 1/4”<br />
2 3/8”<br />
2 1/2”<br />
Wall Thickness<br />
O.D.<br />
.028 .035 .049 .065 .083 .095 .109 .120<br />
S14-1228<br />
S14-5828<br />
S14-3428<br />
S14-7828<br />
S14-1028<br />
S14-11828<br />
S14-11428<br />
S14-1235<br />
S14-5835<br />
S14-3435<br />
S14-7835*<br />
S14-1035<br />
S14-11835<br />
S14-11435<br />
S14-13835<br />
S14-11235<br />
S14-15835<br />
S14-13435<br />
S14-17835<br />
S14-19035<br />
S14-2035<br />
S14-21235<br />
S14-1249<br />
S14-5849<br />
S14-3449*<br />
S14-7849*<br />
S14-1049*<br />
S14-11849<br />
S14-11449<br />
S14-13849<br />
S14-11249*<br />
S14-15849<br />
S14-13449<br />
S14-17849<br />
S14-19049<br />
S14-2049*<br />
S14-21449<br />
S14-23849<br />
S14-21249<br />
S14-1265<br />
S14-5865<br />
S14-3465*<br />
S14-7865*<br />
S14-1065*<br />
S14-11865*<br />
S14-11465*<br />
S14-13865<br />
S14-11265*<br />
S14-15865<br />
S14-13465<br />
S14-17865<br />
S14-19065<br />
S14-2065*<br />
S14-21465<br />
S14-23865<br />
S14-21265<br />
S14-1283<br />
S14-5883<br />
S14-3483<br />
S14-7883<br />
S14-1083<br />
S14-11883<br />
S14-11483*<br />
S14-13883<br />
S14-11283*<br />
S14-15883<br />
S14-13483<br />
S14-17883<br />
S14-19083<br />
S14-2083*<br />
S14-21483<br />
S14-23883<br />
S14-5895<br />
S14-3495<br />
S14-7895<br />
S14-1095<br />
S14-11895<br />
S14-11495<br />
S14-13895<br />
S14-11295<br />
S14-15895<br />
S14-13495<br />
S14-17895<br />
S14-19095<br />
S14-2095<br />
S14-21495<br />
S14-23895<br />
S14-34109<br />
S14-78109<br />
S14-10109<br />
S14-118109<br />
S14-114109<br />
S14-138109<br />
S14-112109<br />
S14-158109<br />
S14-134109<br />
S14-178109<br />
S14-190109<br />
S14-20109<br />
S14-214109<br />
S14-238109<br />
S14-34120<br />
S14-10120*<br />
S14-118120<br />
S14-114120*<br />
S14-138120<br />
S14-112120<br />
S14-158120<br />
S14-134120*<br />
S14-178120<br />
S14-190120*<br />
S14-20120<br />
S14-214120*<br />
S14-21295 S14-212109 S14-0212120<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL TUBING<br />
Tubing / Canvas Hardware<br />
<strong>Morse</strong> <strong>Industries</strong> maintains an extensive inventory of 304 and 316L ornamental stainless steel tubing (ASTM A554 TIG<br />
Weld). Tubing is available in 20’ and 24’ lengths with heavy-duty packaging materials to ensure the best possible protection<br />
in transit.<br />
Square and Rectangular Stainless Steel Tube<br />
TUBING / CANVAS HARDWARE<br />
31<br />
Mill Finish. Tubing stock on hand can vary. Call <strong>Morse</strong> <strong>Industries</strong> for for ship ship times. Asterisked items are regular stock items.<br />
A<br />
O.D.Size<br />
B<br />
Wall Thickness<br />
.035 .049 .065 .083<br />
3/4” 3/4”<br />
S14-343435<br />
S14-343449 S14-343465<br />
1” 1”<br />
S14-101035 S14-101049 S14-101065 S14-101083<br />
1 1/4” 1 1/4”<br />
S14-11411449 S14-11411465<br />
1 1/2” 1 1/2”<br />
2” 2”<br />
S14-11211249 S14-11211265<br />
S14-202049 S14-202065<br />
S14-11211283<br />
S14-202083<br />
Wall Thickness<br />
A<br />
5/16” 1 1/2”<br />
S14-51611249 S14-51611265<br />
1” 2”<br />
S14-102049 S14-102065<br />
1 1/2” 2”<br />
S14-1122049 S14-1122065<br />
B<br />
Elliptical Stainless Steel Tube<br />
Available in 600 grit polished and buffed (super buffed). Tubing stock on hand can vary. Call <strong>Morse</strong> <strong>Industries</strong> for ship times.<br />
* Asterisked items are regular stock items.<br />
O.D.Size<br />
Wall Thickness<br />
A<br />
B<br />
.049 .065<br />
.750” .985”<br />
.815” 1.160”<br />
S14-7598549<br />
S14-81511649<br />
S14-7598565<br />
S14-81511665<br />
Wall Thickness<br />
A<br />
.850” 1.350”<br />
S14-8513549<br />
S14-8513565*<br />
1.003” 1.895”<br />
S14-1003189549<br />
S14-1003189565<br />
B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
32<br />
CHANNEL TUBING AND CONNECTORS<br />
Tubing / Canvas Hardware<br />
H2Ube Channel Tubing<br />
NEW<br />
H2Ube channel tubing is 6463 T6 aluminum with a bright dip anodized finish. Inquire for availability on asterisked items.<br />
Part Number Size Length<br />
A42-78H2 7/8” 20’, 24’<br />
A42-10H2 1” 14’, 20’, 24’<br />
A42-114H2* 1 1/4” (inquire for availability)<br />
H2Ube Channel Connectors<br />
NEW<br />
H2Ube connectors are an oval shaped piece inserted into the ends of two lengths of H2Ube to splice them together. Available in 6063 T6 aluminum<br />
with an anodized satin finish. Inquire for availability on asterisked items.<br />
Part Number Size Length<br />
A42-78H2CON* 7/8” 12”<br />
A42-10H2CON* 1” 12”<br />
A42-114H2CON* 1 1/4” 12”<br />
This Tartan 34 has a new<br />
H2Ube dodger with optional<br />
handrail. By eliminating the<br />
use of wrinkle prone pockets a<br />
pleasing dodger was created<br />
on both the inside and the<br />
outside, while reducing the<br />
build time by a third over a<br />
traditional dodger.<br />
H2Ube is Patent Pending<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
CHANNEL TUBING & CONNECTORS<br />
Tubing / Canvas Hardware<br />
Introducing a new way of building dodgers, biminis, awnings or<br />
any canvas application where a tight, smooth look is desired.<br />
H2Ube Channel Tubing incorporates two channels within an<br />
extruded bright anodized tube.<br />
This innovative new product allows for more flexible application<br />
than traditional canvas tops that utilize sewn pockets encasing<br />
the tubing. This type of application can be restrictive depending<br />
on the construction of the top. With H2Ube, a common welt is<br />
sewn to the finished edge of the canvas. Special notches in the<br />
tube allow the welt to be inserted and slid through resulting in<br />
less labor, less material and a smooth, cleaner look.<br />
Canvas is easily sewn to welt<br />
and inserted in channel<br />
TUBING / CANVAS HARDWARE<br />
33<br />
This Grady White enclosure<br />
illustrates the ultra smooth top and<br />
windows achieved using H2Ube<br />
Uncluttered top interiors<br />
H2Ube is Patent Pending<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
34<br />
ALUMINUM TUBING<br />
Tubing / Canvas Hardware<br />
Aluminum Drawn Tubing<br />
Bright dip anodized finish for durability and quality appearance. A23-7858 also available in black 20’ lengths. A23-1065 available in anodized<br />
satin finish only.<br />
Part Number O.D. Wall Thickness Lengths<br />
A23-3458 3/4” .058” 20’<br />
A23-7858 7/8” .058” 16’, 20’, 24’<br />
A23-7865 7/8” .065” 20’, 24’<br />
A23-1065 1” .065 18’ 8”<br />
O.D.<br />
Wall<br />
Thickness<br />
Aluminum Square Tubing<br />
Radius corners. Anodized satin finish.<br />
Part Number O.D. Wall Thickness Lengths<br />
A40-4171 1” .062” 20’, 24’<br />
A40-4172 1” .110” 24’<br />
A40-4175 1 1/4” .062” 20’<br />
O.D. 1”<br />
Wall .062<br />
Thickness<br />
O.D. 1”<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
Part Number<br />
Type<br />
F13-0102 6” wire lanyard<br />
F13-0105 1” x 1/4” pin with 6” lanyard<br />
F13-0106 3/4” x 1/4” pin with 6” lanyard<br />
F13-0107 ALUMINUM SQUARE 1” x 1/4” pin with FITTINGS<br />
6” lanyard and tab<br />
F13-0108 Cam release pin with 6” lanyard and tab<br />
F13-0101 Tubing / Canvas Hardware<br />
1” x 1/4” pin only<br />
F13-0210-RP Release pin for deck hinge F13-0210<br />
Square F13-2801 fittings are are satin satin anodized Snapper finish release finish and pin and work for work square with with our tubing our square tubing. Please inquire for availability.<br />
Jaw Slide<br />
Part Number<br />
Tube Size<br />
F19-0162 1 1/4” O.D.<br />
F13-0102<br />
ARE<br />
TUBING / CANVAS HARDWARE<br />
ARE<br />
35<br />
F13-0105<br />
Deck Hinge<br />
Part Number Tube Size<br />
F19-0165 1 1/4” O.D.<br />
F13-0106<br />
NEW<br />
F19-0162<br />
F13-0107<br />
Quick Release Pin<br />
F13-0108<br />
Part Number Type<br />
F13-2801 Snapper release pin for square tubing<br />
NEW<br />
F19-0165<br />
F13-0101<br />
F13-0210-RP<br />
F13-2801<br />
nfocus Software - Customer Support<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
36<br />
STAINLESS STEEL TOP FITTINGS<br />
Tubing / Canvas Hardware<br />
All Stainless Steel Top Fittings are made of high quality cast 316L highly polished stainless steel. Outside Eye Ends and<br />
Jaw Slides with Bolt come with 1/4”-28 stainless steel set screws. *Heavy duty fittings come with double set screws.<br />
Outside Eye Ends<br />
Part Number<br />
Tube Size<br />
F11-0100 7/8” O.D.<br />
F12-0101 1” O.D.<br />
F11-0204 Heavy Duty*<br />
7/8” O.D.<br />
F12-0205 Heavy Duty*<br />
1” O.D.<br />
F17-0106 Heavy Duty*<br />
1 1/4” O.D.<br />
F11-0100 F12-0101 F11-0204 F12-0205 F17-0106<br />
Inside Eye Ends<br />
Part Number<br />
Tube Size<br />
F11-0174 7/8” O.D.<br />
F11-0175 3/4” O.D.<br />
FIE-0172<br />
7/8” O.D. for .058 aluminum drawn tubing<br />
Jaw Slides with Bolt<br />
F11-0174<br />
FIE-0172<br />
F11-0175<br />
Part Number<br />
Tube Size<br />
F11-0160 7/8” O.D.<br />
F12-0161 1” O.D.<br />
F11-0264 Heavy Duty*<br />
7/8” O.D.<br />
F12-0265 Heavy Duty*<br />
1” O.D.<br />
F17-0166 Heavy Duty*<br />
1 1/4” O.D.<br />
F11-0160<br />
F12-0161<br />
F11-0264 F12-0265 F17-0166<br />
Hinged Jaw Slides<br />
Jaw Slides are hinged at the top with a concealed pin and do not come apart like the traditional Break Apart Jaw Slides. Attaching additional<br />
hardware to an existing frame or welded railing has never been easier or more attractive.<br />
Part Number<br />
F11-0264B<br />
F12-0265B<br />
F17-0266B<br />
Tube Size<br />
7/8” O.D.<br />
1” O.D.<br />
1 1/4” O.D.<br />
Break Apart Jaw Slides<br />
Break Apart Jaw Slides lock together around 7/8”, 1” or 1 1/4” tubing sizes with a solid interlocking design. These quality fittings are perfect for<br />
mounting bimini tops to existing railing without the need to drill holes. Fittings include stainless steel bolts and locking nuts for installation.<br />
Part Number<br />
F11-0164B<br />
F12-0165B<br />
F12-0166B<br />
Tube Size<br />
7/8” O.D.<br />
1” O.D.<br />
1 1 / 4 ” O.D.<br />
F11-0264B F12-0265B F17-0266B<br />
F11-0164B<br />
F12-0165B<br />
F12-0166B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL TOP FITTINGS<br />
Tubing / Canvas Hardware<br />
All Stainless Steel Top Fittings are made of high quality cast 316L highly polished stainless steel.<br />
Windshield Side Mount with Bolt<br />
The Windshield Side Mount with Bolt fitting is designed to fit today’s radius top<br />
windshields. It allows the fabricator to install a convertible or bimini canvas top<br />
directly to the windshield instead of down on the deck or inside panel. It can<br />
also be rotated a few degrees each way to aid in alignment with the top caps.<br />
Part Number<br />
Radius<br />
F16-0015 .4375”<br />
F16-0016 .500”<br />
TUBING / CANVAS HARDWARE<br />
AS HARDWARE<br />
37<br />
F16-0015<br />
Deck Hinges for #10 Fasteners<br />
Part Number<br />
Type<br />
F13-0235A<br />
Adjustable with bolt<br />
F13-0220 4-hole heavy duty with bolt<br />
F13-0220B<br />
4-hole heavy duty without bolt<br />
F13-0235A<br />
F13-0220<br />
F13-0220B<br />
F13-0200 Straight with bolt<br />
F13-0210 Straight with removable pin<br />
F13-0210B<br />
Straight without bolt<br />
F13-0211 Straight with F13-0107 pull pin<br />
F13-0212 Straight with F13-0108 spring<br />
release toggle pin<br />
F13-0201 Heavy duty with bolt<br />
F13-0200<br />
F13-0210<br />
F13-0210B<br />
F13-0211<br />
F13-0212<br />
F13-0201<br />
F13-0230 Angled base with bolt 78°<br />
F13-0230B Angled base without bolt 78°<br />
F13-0230A Angled base with F13-0210-RP<br />
spring release toggle pin 78°<br />
F13-0202 Heavy duty angled base with bolt 77°<br />
F13-0230 F13-0230B<br />
F13-0230A<br />
F13-0202<br />
F13-0240 Concave base with bolt<br />
F13-0240A<br />
Concave base with F13-0210-RP<br />
spring release toggle pin<br />
F13-0240B<br />
Concave base without bolt<br />
F13-0240<br />
F13-0240A<br />
F13-0240B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
38<br />
STAINLESS STEEL TOP FITTINGS<br />
Tubing / Canvas Hardware<br />
Flush Deck Hinge<br />
Part Number<br />
F13-0236B<br />
F13-0236BP<br />
Type<br />
Quick release for easy use<br />
Replacement Post<br />
360-Degree Swivel Deck Hinge<br />
Part Number<br />
Type<br />
F13-0237 360˚ Swivel deck hinge base<br />
F11-0106 7/8” eye end for swivel deck hinge<br />
F12-0106 1” eye end for swivel deck hinge<br />
F17-0107 1 1/4” eye end with double set<br />
screws for swivel deck hinge<br />
Side Mount Deck Hinges<br />
Part Number<br />
Type<br />
F13-0250 2-hole side mount<br />
F13-0255 4-hole side mount<br />
F13-0236B<br />
F13-0236BP<br />
F11-0237 F11-0106 F12-0106 F17-0107<br />
Deck Strap (Pad Eye)<br />
Part Number Type<br />
F16-1200 3/16” opening<br />
F13-0250 F13-0255<br />
F16-1200<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL TOP FITTINGS<br />
Tubing / Canvas Hardware<br />
All Stainless Steel Release Pins are made of high quality stainless steel.<br />
Quick Release Pins and Lanyards<br />
Part Number<br />
Type<br />
F13-0102 6” wire lanyard<br />
F13-0105 1” x 1/4” pin with 6” lanyard<br />
F13-0106 3/4” x 1/4” pin with 6” lanyard<br />
F13-0107 1” x 1/4” pin with 6” lanyard and tab<br />
F13-0108 Cam release pin with 6” lanyard and tab<br />
F13-0101 1” x 1/4” pin only<br />
F13-0210-RP Release pin for deck hinge F13-0210<br />
F13-2801 Snapper release pin for square tubing<br />
TUBING / CANVAS HARDWARE<br />
ARE<br />
ARE<br />
39<br />
F13-0102<br />
F13-0105<br />
F13-0106<br />
F13-0107<br />
F13-0108<br />
F13-0101<br />
F13-0210-RP<br />
F13-2801<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
ZAMAK TOP FITTINGS<br />
Tubing / Canvas Hardware<br />
Zamak is a zinc alloy consisting primarily of aluminum, magnesium and copper. Chrome or nickel plated for a hard,<br />
durable finish.<br />
Chrome Heavy Duty Outside Eye End<br />
Part Number<br />
Tube Size<br />
F80-0104 .875” O.D.<br />
40<br />
Chrome Heavy Duty Jaw Slide<br />
Part Number<br />
Tube Size<br />
F80-0164 .875” O.D.<br />
F80-0104<br />
Chrome Two Hole Side Mount<br />
Part Number<br />
Type<br />
F80-0250 Two hole side mount<br />
F80-0164<br />
Chrome Deck Hinges for #10 Fasteners<br />
Part Number<br />
Type<br />
F80-0200 Straight deck hinge with bolt<br />
F80-0230 Angled deck hinge with bolt 80°<br />
F80-0250<br />
Nickle Plated Deck Strap (Pad Eye)<br />
Part Number<br />
Type<br />
F80-1200 3/16” opening<br />
F80-0200 F80-0230<br />
Replacement Screws and Bolts<br />
F80-1200<br />
Part Number<br />
Description<br />
F92-3000 Allen Head Set Screws for F80-0104, F80-0164<br />
F92-3000<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
NYLON FITTINGS<br />
NYLON FITTINGS<br />
Tubing / Canvas Hardware<br />
Tubing / Canvas Hardware<br />
All Nylon Fittings are made of non-breakable, black nylon resistant to sun and sea damage in matte finish.<br />
All Nylon Fittings are made of non-breakable, black nylon resistant to sun and sea damage in matte finish.<br />
Jaw Slides<br />
Jaw Slides<br />
Part Number<br />
Part F40-0804BN Number<br />
F40-0804BN<br />
F40-0878BN<br />
F40-0878BN<br />
Outside Eye Ends<br />
Outside Eye Ends<br />
Part Number<br />
Part F40-0718BN Number<br />
F40-0718BN<br />
Tube Size<br />
Tube 3/4” O.D. Size<br />
3/4” 7/8” O.D.<br />
7/8” O.D.<br />
Tube Size<br />
Tube 7/8” O.D. Size<br />
7/8” O.D.<br />
F40-0804BN<br />
F40-0878BN<br />
F40-0804BN<br />
F40-0878BN<br />
TUBING / CANVAS HARDWARE<br />
41<br />
Inside Eye Ends<br />
Inside Eye Ends<br />
Part Number<br />
Part Number<br />
F40-0265BN<br />
F40-0265BN<br />
F40-0278BN<br />
F40-0278BN<br />
Side Mounts<br />
Side Mounts<br />
All Side Mounts fit A52-0037 Aluminum Slide Track.<br />
All Part Side Number Mounts fit A52-0037 Aluminum Type Slide Track.<br />
Part F40-0100BN Number<br />
F40-0100BN<br />
F40-0101BN<br />
F40-0101BN<br />
F40-0105BN<br />
F40-0105BN<br />
Deck Hinges<br />
Deck Hinges<br />
F40-0718BN<br />
F40-0718BN<br />
Tube Size<br />
Tube Size<br />
3/4” O.D.<br />
3/4” 7/8” O.D.<br />
7/8” O.D.<br />
2-hole Type side mount<br />
2-hole Side mount/slide side with regular<br />
Side 1/4” mount/slide thumb screw with regular<br />
Side 1/4” mount/slide thumb screw with 1/4” head screw<br />
Side mount/slide with 1/4” head screw<br />
Large slide locks fit A52-0037 aluminum slide track with fillister head lock screw.<br />
Large Part slide Number locks fit A52-0037 Type aluminum slide track with fillister head lock screw.<br />
F40-0401BN<br />
Part Number<br />
Type<br />
Small<br />
F40-0504BN F40-0401BN<br />
Small<br />
Large<br />
F40-0504BNT F40-0505BN Large Angledwith wing nut thumbscrew<br />
F40-0505BN F40-0604BNL Angled<br />
Left large slide lock<br />
F40-0604BNL F40-0604BNR Right Left large slide lock<br />
F40-0604BNR Right large slide lock<br />
Replacement Screws and Bolts<br />
Replacement Screws and Bolts<br />
Part Number<br />
Description<br />
F40-0265BN<br />
F40-0265BN<br />
F40-0100BN<br />
F40-0100BN<br />
F40-0401BN<br />
F40-0401BN<br />
Part F92-F401 Number Allen Description Head Set Screws for F40-0878, F40-0804, F40-0718<br />
F92-F401 F92-F402 Allen Bolt for Head F40-0401, Set Screws F40-0504, for F40-0878, F40-0505, F40-0804, F40-0604 F40-0718<br />
F92-F402 F92-F404<br />
Bolt for F40-0401, F40-0100BN F40-0504, F40-0505, F40-0604<br />
F92-F404<br />
Bolt for F40-0100BN<br />
F40-0278BN<br />
F40-0278BN<br />
F40-0101BN<br />
F40-0101BN<br />
F40-0504BN<br />
F40-0504BN<br />
F40-0105BN<br />
F40-0105BN<br />
F40-0604BNR<br />
F40-0604BNR<br />
F40-0504BNT<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
NYLON FITTINGS<br />
Tubing / Canvas Hardware<br />
All Nylon Fittings are made of non-breakable, black nylon resistant to sun and sea damage in matte finish.<br />
Channel End Caps<br />
Part Number<br />
F90-0404BN<br />
F90-0429BN<br />
42<br />
Lash Hook<br />
F90-0404BN<br />
F90-0429BN<br />
Part Number<br />
F40-0900BN<br />
Slide Lock with Fillister Head Screw<br />
F40-0900BN<br />
Part Number<br />
F40-0600BN<br />
Nylon Head Screw<br />
F40-0600BN<br />
1/4” #20 screw fitting all Side Mounts and Deck Hinges.<br />
Part Number<br />
F40-0424BN<br />
F40-0425BN<br />
Two Hole Eye Strap<br />
F40-0424BN<br />
F40-0425BN<br />
Part Number<br />
F40-0704BN<br />
F40-0704BN<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
MOORING POLES<br />
Tubing / Canvas Hardware<br />
Canvas Support Poles feature a space-saving, 3-in-1 design. The 7/8” and 3/4” diameter satin anodized aluminum tubing<br />
telescopes to 55” for the smaller size and 70” for the larger size. The collar is available in white nylon or aluminum with<br />
a special wing-tip screw for easy tightening. (Pictures depict a bright finish, product is only stocked in satin anodize).<br />
Complete Pole w/ Zamak Collar<br />
Small: M80-0010<br />
Large: M80-0020<br />
Complete Pole w/ Nylon Collar<br />
Small: M40-0010<br />
Large: M40-0020<br />
TUBING / CANVAS HARDWARE<br />
43<br />
Efficient 3-in-1 Design<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
44<br />
CANVAS TOP FRAMES<br />
Tubing / Canvas Hardware<br />
Canvas Support Top Frames are convenient options for boats 40” to 80” in beam. Each frame is made of 7/8” satin anodized<br />
aluminum tubing, eliminating the possibility of oxidation and retaining a clear, sparkling finish for years to come.<br />
BTK-1: Black Nylon Fittings<br />
(one frame per carton)<br />
One frame; two 7/8” black jaw slides; two large<br />
black deck hinges; four 7/8” black inside eye ends;<br />
four 1” slides; two 1” snaps.<br />
31 ½”<br />
80”<br />
42 ½”<br />
3.5” HIGH CROWN<br />
2” 2”<br />
10”<br />
PUSH IN LEG TO THIS POSITION FOR<br />
PROPER FRAME TENSION<br />
10”<br />
BTK-2: Black Nylon Fittings<br />
(two frames per carton)<br />
Two frames; two 7/8” black jaw slides; four large<br />
black deck hinges; eight 7/8” black inside eye ends;<br />
eight 1” slides; four 1” snaps.<br />
BTK 3 = 31”<br />
BTK 4 = 39”<br />
BTK 5 = 60”<br />
BTK 3, 4 & 5 = 82”<br />
BTK-6: Bimini Boat Top Frame<br />
(The boat top design allows for the center bow to be<br />
cut to fit the boat width. The insert joining the legs<br />
and the bows are permanently bent into the legs<br />
allowing for easy connection of the three pieces).<br />
Four black jaw slides; two black angle deck hinges;<br />
six black eye ends; six buckles; four snaps.<br />
BTK-7: Bimini Boat Top Frame<br />
Two 316L stainless steel jaw slides; two stainless<br />
steel eye ends; two stainless steel straight deck<br />
hinges; two stainless steel pad eyes; two 70” crowns;<br />
two 51” short legs; two 71” long legs.<br />
BTK-3,4,5: No Fittings. Frame Only.<br />
82” wide 3-part frame with internal splices.<br />
APPROX 7’ 6” MAX<br />
101”<br />
All measurements are<br />
taken in the vertical position.<br />
APPROX 42”<br />
MAX<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
SLIDE TRACKS<br />
Tubing / Canvas Hardware<br />
All Slide Tracks are bright anodized finish.<br />
Slide Track Channel<br />
Part Number<br />
Type<br />
A52-0037 Stocked in 14’ lengths<br />
3/8”<br />
7/16”<br />
TUBING / CANVAS HARDWARE<br />
AS HARDWARE<br />
21/32”<br />
7/8”<br />
45<br />
Large Slide Track Channel<br />
Part Number<br />
Type<br />
A52-0309 Stocked in various lengths<br />
(mill run only)<br />
1/2”<br />
9/16”<br />
13/16”<br />
Side Mounts<br />
1 1/16”<br />
All Side Mounts fit A52-0037 Aluminum Slide Track.<br />
Part Number<br />
Type<br />
F40-0101BN<br />
F40-0105BN<br />
Side mount/slide with regular<br />
1/4” thumb screw<br />
Side mount/slide with 1/4” head screw<br />
Deck Hinges<br />
F40-0101BN<br />
F40-0105BN<br />
Large slide locks fit A52-0037 aluminum slide track with fillister head lock screw.<br />
Part Number<br />
Type<br />
F40-0604BNL<br />
F40-0604BNR<br />
Left large slide lock<br />
Right large slide lock<br />
Channel End Caps<br />
F40-0604BNR<br />
Part Number<br />
F90-0404BN<br />
F90-0429BN<br />
F90-0404BN<br />
F90-0429BN<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TUBING / CANVAS HARDWARE<br />
AWNING RAILS AND VINYL WELT<br />
Tubing / Canvas Hardware<br />
Aluminum Awning Rail 135 Degree<br />
Part Number<br />
Type<br />
A52-0034 Bright anodized or mill finish<br />
20’ lengths<br />
Length<br />
16’<br />
1.250”<br />
46<br />
Aluminum Awning Rail 90 Degree<br />
Part Number<br />
Type<br />
A52-1276 Mill finish<br />
20’ lengths<br />
Length<br />
20’<br />
.500”<br />
1.250”<br />
Rigid Vinyl Awning Rail<br />
.500”<br />
Part Number<br />
Type<br />
V25-9207 White<br />
or ivory<br />
V25-9207 Black<br />
Length<br />
8’, 20’<br />
8’<br />
1.250”<br />
Vinyl Extruded Awning Welts<br />
.600”<br />
Awning Welts available in 250’ rolls.<br />
Part Number<br />
Type<br />
V15-0034BKA Black White<br />
V15-0034BKA V15-0034WHA Black White<br />
Length<br />
100’, 250’ roll<br />
100’ roll<br />
Awning Rail Square Tubing<br />
1”x1” x 1” with radius corners. Mill run only.<br />
Part Number<br />
Wall Thickness<br />
A40-4172 A40-10090 .090” .110”<br />
20’ lengths<br />
Length<br />
24’<br />
.110” .090<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
CURTAIN TRACK SYSTEM<br />
Tubing / Canvas Hardware<br />
Ceiling Mount<br />
Part Number<br />
Type<br />
A52-0051 Satin anodized<br />
12’ lengths (mill run only)<br />
11/16”<br />
5/32”<br />
11/64”<br />
.270”<br />
TUBING / CANVAS HARDWARE<br />
AS HARDWARE<br />
Eyelet Carrier<br />
47<br />
Part Number<br />
Type<br />
F40-0110 Natural nylon<br />
Sew On Carrier<br />
Part Number<br />
Type<br />
F40-0112 Natural nylon<br />
End Cap<br />
Part Number<br />
Type<br />
F40-0119 Natural nylon<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TOWER PRODUCTS<br />
HOUSEBOAT TOWER PRODUCTS<br />
48<br />
• Schedule 40<br />
Aluminum Pipe<br />
• Pipe Aligners<br />
• Aluminum Oval Tubing<br />
and Inserts<br />
• Stainless Steel and<br />
Aluminum Rod Holders<br />
• Aluminum Pins<br />
• Aluminum Flat Bar<br />
• Aluminum Pads<br />
1.800.325.7513 www.morseindustries.com
TOWER PRODUCTS<br />
SCHEDULE 40 TUBING AND ALIGNERS<br />
Tower Products<br />
Wall Thickness<br />
49<br />
O.D.<br />
Schedule 40 Aluminum Pipe<br />
Mill finish in 20’ lengths.<br />
NEW<br />
Part # IPS Size O.D. Wall I.D. Finish<br />
A45-2000 3/4” 1 3/64” 7/64” 53/64” Mill<br />
A45-3000 1” 1 5/16” 1/8” 1 3/64” Mill<br />
A45-4000 1 1/4” 1 21/32” 9/64” 1 3/8” Mill<br />
A45-5000 1 1/2” 1 29/32” 9/64” 1 39/64” Mill<br />
A45-6000 2” 2 3/8” 5/32” 2 1/16” Mill<br />
Polished or 320 grit brushed bright dip anodized in 23’ lengths.<br />
PPF-.75 3/4” 1 3/64” 7/64” 53/64” Polished<br />
PPF-1 1” 1 5/16” 1/8” 1 3/64” Polished<br />
PPF-1.25 1 1/4” 1 21/32” 9/64” 1 3/8” Polished<br />
PPF-1.5 1 1/2” 1 29/32” 9/64” 1 39/64” Polished<br />
PPF-2 2” 2 3/8” 5/32” 2 1/16” Polished<br />
PPF-2.5 2 1/2” 2 7/8” 13/64” 2 15/32” Polished<br />
PPF-3 3” 3 1/2” 7/32” 3 1/16” Polished<br />
PBF-.75 3/4” 1 3/64” 7/64” 53/64” Brushed<br />
PBF-1 1” 1 5/16” 1/8” 1 3/64” Brushed<br />
PBF-1.25 1 1/4” 1 21/32” 9/64” 1 3/8” Brushed<br />
PBF-1.5 1 1/2” 1 29/32” 9/64” 1 39/64” Brushed<br />
PBF-2 2” 2 3/8” 5/32” 2 1/16” Brushed<br />
PBF-2.5 2 1/2” 2 7/8” 13/64” 2 15/32” Brushed<br />
PBF-3 3” 3 1/2” 7/32” 3 1/16” Brushed<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
PIPE ALIGNERS<br />
Tower Products<br />
Pipe Aligners<br />
Designed to align two pieces of pipe end to end that can be welded.<br />
Part Number Fits Pipe Size Length<br />
PA-1 1” 2”<br />
PA-1.25 1 1/4” 3”<br />
PA-1.5 1 1/2” 5”<br />
PA-2 2” 5”<br />
PA-2.5 2 1/2” 6”<br />
TOWER PRODUCTS<br />
50<br />
NEW<br />
<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TOWER PRODUCTS<br />
ALUMINUM OVAL TUBING AND INSERTS<br />
Tower Products<br />
Designed for towers steps, bow rails, grab rails, swim platforms and other applications.<br />
Oval Tubing<br />
Part Number A B Finish Length<br />
51<br />
TOPF-1X1.5 1” 1 1/2” Polished 20’<br />
TOPF-1X1.875 1” 1 7/8” Polished 20’<br />
TOPF-1.25X3 1 1/4” 3” Polished 20’<br />
TOPF-1.25X4 1 1/4” 4” Polished 20’<br />
TOBPF-1X1.5 1” 1 1/2” Brushed 20’<br />
TOBPF-1X1.875 1” 1 7/8” Brushed 20’<br />
TOBPF-1.25X3 1 1/4” 3” Brushed 20’<br />
TOBPF-1.25X4 1 1/4” 4” Brushed 20’<br />
NEW<br />
A<br />
B<br />
Oval Tubing with Ribs<br />
Part Number A B Finish Length<br />
TOPR-1X1.5 1” 1 1/2” Polished 20’<br />
TOPR-1X1.875 1” 1 7/8” Polished 20’<br />
A<br />
Oval Tubing with Grooves and Inserts<br />
Part Number A B Grooves Finish Length<br />
NEW<br />
B<br />
TOPG-1X1.5 1” 1 1/2” Two Polished 20’<br />
TOPG-1X1.875 1” 1 7/8” Three Polished 20’<br />
OVAL-INSERT-102 (insert fits the two groove tubing) Black Rubber 12’<br />
OVAL-INSERT-203 (insert fits the three groove tubing) Black Rubber 12’<br />
OVAL-INSERT-102<br />
OVAL-INSERT-203<br />
OVAL TUBE & INSERT<br />
SOLD SEPARATELY<br />
NEW<br />
TOPG-1X1.5<br />
NEW<br />
TOPG-1X1.875<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
stainless steel and aluminum rod holders<br />
Tower Products<br />
Rod Holders are available both in stainless steel and aluminum in various styles as seen on this page, complete with<br />
snug fitting vinyl liners.<br />
Stainless Steel Rod Holders<br />
Rod holders come complete with snug vinyl liners in polished stainless steel.<br />
TOWER PRODUCTS<br />
Part Number Description I.D.<br />
FRH-2000P10.125 Tulip Rod Holder 1.75”<br />
FRH-2000P10.125-F Tulip Rod Holder with Flange 1.75”<br />
52<br />
NEW<br />
FRH-2000P10.125-F<br />
NEW<br />
FRH-2000P10.125<br />
Aluminum Rod Holders<br />
Rod holders come complete with snug vinyl liners.<br />
Part Number Description Finish I.D.<br />
RHTP-1.75C Weld On Tulip Rod Holder Polished 1.75”<br />
RHTP-1.75G Weld On Tulip Rod Holder Gold 1.75”<br />
RHTP-1.9C Weld On Tulip Rod Holder Polished 1.87”<br />
RH-T-TOPC Weld On Straight Rod Holder, T-Top Style with Flange Polished 1.75”<br />
RH-T-TOPG Weld On Straight Rod Holder, T-Top Style with Flange Gold 1.75”<br />
TULIP-T-TOPC Weld On Tulip Rod Holder, T-Top Style with Flange Polished 2.25”<br />
TULIP-T-TOPG Weld On Tulip Rod Holder, T-Top Style with Flange Gold 2.25”<br />
NEW<br />
RHT-T-TOP<br />
(available in both<br />
clear polish & gold)<br />
NEW<br />
RHTP - 1.75<br />
RHTP - 1.9<br />
(available in both<br />
clear polish & gold)<br />
NEW<br />
TULIP-T-TOP<br />
(available in both<br />
clear polish & gold)<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TOWER PRODUCTS<br />
ALUMINUM PINS<br />
Tower Products<br />
Our high quality precision fittings are machined from 6000 series solid aluminum stock for strength and anodized for<br />
long lasting durability. All pipe sizes correspond to Schedule 40.<br />
Breakaway Pins<br />
All pins are bright anodize finish. Please call for availability on other types and sizes.<br />
Part Number<br />
Fits Pipe Size<br />
53<br />
PBY-1.25 1.25”<br />
PBY-1.5 1.5”<br />
Female Pins<br />
All pins are bright anodize finish. Please call for availability on other types and sizes.<br />
NEW<br />
Part Number<br />
Fits Pipe Size<br />
PF-1 1”<br />
PF-1.25 1.25”<br />
PF-1.5 1.5”<br />
NEW<br />
Male/Female Combo Pins<br />
All pins are bright anodize finish. Please call for availability on other types and sizes.<br />
Part Number<br />
Fits Pipe Size<br />
PMF-1 1”<br />
PMF-1.25 1.25”<br />
PMF-1.5 1.5”<br />
NEW<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ALUMINUM FLAT BARS<br />
Tower Products<br />
Aluminum Square Edged Flat Bar<br />
Available in 12’ lengths.<br />
Part Number A B Finish<br />
BFBFSE-.250X2 1/4” 2” Brushed<br />
BFBFSE-.250X3 1/4” 3” Brushed<br />
BFBFSE-.250X4 1/4” 4” Brushed<br />
BFPFSE-.250X1 1/4” 1” Polished<br />
BFPFSE-.250X2 1/4” 2” Polished<br />
BFPFSE-.250X3 1/4” 3” Polished<br />
BFPFSE-.250X4 1/4” 4” Polished<br />
A<br />
NEW<br />
B<br />
TOWER PRODUCTS<br />
54<br />
Aluminum Radius Edged Flat Bar<br />
Available in 12’ lengths.<br />
Part Number A B Finish<br />
BFPFRE-.125X4 1/8” 4” Polished<br />
BFPFRE-.375X2 3/8” 2” Polished<br />
A<br />
NEW<br />
B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TOWER PRODUCTS<br />
ALUMINUM PADS<br />
Tower Products<br />
Unless otherwise noted, all pads are .25” thick, machined to a mirror finish or brushed, drilled and countersunk for 82<br />
degree, #14, 1/4” hardware and bright anodized.<br />
Round Pads<br />
Please call for availability on other types and sizes.<br />
55<br />
Part Number O.D. Holes Finish<br />
PR-2.5D3H 2.5” 3 Polished<br />
PR-3D3H 3” 3 Polished<br />
PR-3.5D3H 3.5” 3 Polished<br />
PR-3.5D3HNC (no countersink) 3.5” 3 Polished<br />
PR-3.5D3HNC-90 (no countersink 90°) 3.5” 3 Polished<br />
PR-3.5D3H 3.5” 3 Polished<br />
PR-3.5D4H 3.5” 4 Polished<br />
PR-4D3H 4” 3 Polished<br />
PR-4D3HNC (no countersink) 4” 3 Polished<br />
PR-4.5D3H 4.5” 3 Polished<br />
PR-6D4H 6” 4 Polished<br />
PR-6D5H 6” 5 Polished<br />
PRB-2.5D3H 2.5” 3 Circular Brush<br />
PRB-3D3H 3” 3 Circular Brush<br />
PRB-3.5D3H 3.5” 3 Circular Brush<br />
PRB-3.5D3HNC (no countersink) 3.5” 3 Circular Brush<br />
PRB-3.5D3HNC-90 (no countersink 90°) 3.5” 3 Circular Brush<br />
PRB-3.5D3H 3.5” 3 Circular Brush<br />
PRB-3.5D4H 3.5” 4 Circular Brush<br />
PRB-4D3H 4” 3 Circular Brush<br />
PRB-4D3HNC (no countersink) 4” 3 Circular Brush<br />
PRB-4.5D3H 4.5” 3 Circular Brush<br />
PRB-6D4H 6” 4 Circular Brush<br />
PRB-6D5H 6” 5 Circular Brush<br />
NEW<br />
NEW<br />
Rectangular Pads<br />
Please call for availability on other types and sizes.<br />
Part Number O.D. Holes Finish<br />
PRT-3X4 3” x 4” 4 Brushed<br />
PRTP-3X4 3” x 4” 4 Polished<br />
PRTP-3X4.75 3” x 4.75” 4 Polished<br />
NEW<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL PADS<br />
Tower Products<br />
Stamped from 316 stainless, these pads have a high polished finish and are drilled for 1/4” screws.<br />
Round Stainless Steel Pads<br />
Part Number O.D. Thickness Holes Finish<br />
F10-0001P 2.375” .120” 3, 120 degrees Polished<br />
F10-0002P 2.375” .120” 3, 90 degrees Polished<br />
F10-0003P 2.875” .120” 3, 120 degrees Polished<br />
TOWER PRODUCTS<br />
56<br />
F10-0001P F10-0002P F10-0003P<br />
Rectangular Stainless Steel Pads<br />
Part Number O.D. Thickness Holes Finish<br />
F10-0004P 3.125” x 1.75” F10-0001P .120” F10-0002P 4 F10-0003P Polished<br />
F10-0006P 3.25” x 1.5” .135” 2 Polished<br />
F10-0004P<br />
F10-0006P<br />
F10-0004P<br />
F10-0006P<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RAILING PRODUCTS<br />
RAILING PRODUCTS<br />
“<strong>Morse</strong> <strong>Industries</strong> carries the quality<br />
products we need. They are easy to work<br />
with and take good care of us.”<br />
57<br />
Railmakers NW<br />
railmakersnw.com<br />
• Stainless Steel Tubing<br />
• Stainless Steel Fittings<br />
• Stainless Steel<br />
Welding Pads<br />
1.800.325.7513 www.morseindustries.com
RAILING PRODUCTS<br />
STAINLESS STEEL TUBING<br />
Railing Products<br />
Wall Thickness<br />
58<br />
O.D.<br />
<strong>Morse</strong> <strong>Industries</strong> maintains an extensive inventory of 304 and 316L<br />
ornamental stainless steel tubing (ASTM A554 TIG Weld). Tubing is<br />
available in 20’ and 24’ lengths with heavy-duty packaging materials<br />
to ensure the best possible protection in transit. Tubing stock<br />
on hand can vary. Call <strong>Morse</strong> <strong>Industries</strong> for ship times. *Asterisked *Astrisked<br />
items are regular stock items.<br />
Round Stainless Steel Tube<br />
Standard finishes include: as welded (mill finish), 600 grit (polished and buffed) and linear buff (#8 mirror finish).<br />
O.D.Size<br />
Wall Thickness<br />
.028 .035 .049 .065 .083 .095 .109 .120<br />
1/2”<br />
5/8”<br />
3/4”<br />
7/8”<br />
1”<br />
1 1/8”<br />
1 1/4”<br />
S14-1228<br />
S14-5828<br />
S14-3428<br />
S14-7828<br />
S14-1028<br />
S14-11828<br />
S14-11428<br />
S14-1235<br />
S14-5835<br />
S14-3435<br />
S14-7835*<br />
S14-1035<br />
S14-11835<br />
S14-11435<br />
S14-1249<br />
S14-5849<br />
S14-3449*<br />
S14-7849*<br />
S14-1049*<br />
S14-11849<br />
S14-11449<br />
S14-1265<br />
S14-5865<br />
S14-3465*<br />
S14-7865*<br />
S14-1065*<br />
S14-11865*<br />
S14-11465*<br />
S14-1283<br />
S14-5883<br />
S14-3483<br />
S14-7883<br />
S14-1083<br />
S14-11883<br />
S14-11483*<br />
S14-5895<br />
S14-3495<br />
S14-7895<br />
S14-1095<br />
S14-11895<br />
S14-11495<br />
S14-34109<br />
S14-78109<br />
S14-10109<br />
S14-118109<br />
S14-114109<br />
S14-34120<br />
S14-10120*<br />
S14-118120<br />
S14-114120*<br />
1 3/8”<br />
1 1/2”<br />
1 5/8”<br />
1 3/4”<br />
1 7/8”<br />
1.900”<br />
2”<br />
2 1/4”<br />
2 3/8”<br />
2 1/2”<br />
S14-13835<br />
S14-11235<br />
S14-15835<br />
S14-13435<br />
S14-17835<br />
S14-19035<br />
S14-2035<br />
S14-21235<br />
S14-13849<br />
S14-11249*<br />
S14-15849<br />
S14-13449<br />
S14-17849<br />
S14-19049<br />
S14-2049*<br />
S14-21449<br />
S14-23849<br />
S14-21249<br />
S14-13865<br />
S14-11265*<br />
S14-15865<br />
S14-13465<br />
S14-17865<br />
S14-19065<br />
S14-2065*<br />
S14-21465<br />
S14-23865<br />
S14-21265<br />
S14-13883<br />
S14-11283*<br />
S14-15883<br />
S14-13483<br />
S14-17883<br />
S14-19083<br />
S14-2083*<br />
S14-21483<br />
S14-23883<br />
S14-13895 S14-138109 S14-138120<br />
S14-11295 S14-112109 S14-112120<br />
S14-15895 S14-158109 S14-158120<br />
S14-13495<br />
S14-17895<br />
S14-19095<br />
S14-2095<br />
S14-21495<br />
S14-23895<br />
S14-134109<br />
S14-178109<br />
S14-190109<br />
S14-20109<br />
S14-214109<br />
S14-238109<br />
S14-134120*<br />
S14-178120<br />
S14-190120*<br />
S14-20120<br />
S14-214120*<br />
S14-21295 S14-212109 S14-0212120<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL TUBING<br />
Railing Products<br />
<strong>Morse</strong> <strong>Industries</strong> maintains an extensive inventory of 304 and 316L ornamental stainless steel tubing (ASTM A554 TIG<br />
Weld). Tubing is available in 20’ and 24’ lengths with heavy-duty packaging materials to ensure the best possible<br />
protection in transit.<br />
Square and Rectangular Stainless Steel Tube<br />
Mill Finish. Tubing stock on hand can vary. Call <strong>Morse</strong> <strong>Industries</strong> for ship times. All items are mill run only.<br />
RAILING PRODUCTS<br />
59<br />
A<br />
O.D.Size<br />
B<br />
Wall Thickness<br />
.035 .049 .065 .083<br />
3/4” 3/4”<br />
1” 1”<br />
S14-343435 S14-343449 S14-343465<br />
S14-010135 S14-010149 S14-010165 S14-010183<br />
1 1/4” 1 1/4”<br />
S14-11411449 S14-11411465<br />
1 1/2” 1 1/2”<br />
S14-11211249 S14-11211265<br />
S14-11211283<br />
Wall Thickness<br />
A<br />
2” 2”<br />
S14-202049 S14-202065<br />
S14-202083<br />
5/16” 1 1/2”<br />
S14-51611249 S14-51611265<br />
1” 2”<br />
S14-102049 S14-102065<br />
1 1/2” 2”<br />
S14-1122049 S14-1122065<br />
B<br />
Elliptical Stainless Steel Tube<br />
Available in 600 grit polished and buffed (super buffed). Tubing stock on hand can vary. Call <strong>Morse</strong> <strong>Industries</strong> for ship times. All items are mill<br />
run only, except S14-8513565.<br />
O.D.Size<br />
A<br />
B<br />
.750” .985”<br />
.815” 1.160”<br />
.850” 1.350”<br />
1.003” 1.895”<br />
Wall Thickness<br />
.049 .065<br />
S14-7598549 S14-7598565<br />
S14-81511649 S14-81511665<br />
S14-8513549 S14-8513565<br />
S14-1003189549 S14-1003189565<br />
Wall Thickness<br />
A<br />
B<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RAILING PRODUCTS<br />
60<br />
STAINLESS STAINLESS STEEL FITTINGS STEEL FITTINGS<br />
Railing Products Railing Products<br />
All Stainless Steel All All Rail Stainless Fittings Steel are Steel Rail made Part Rail Fittings Number of high are quality are made made Tube cast of of high Size 316L high quality highly Type cast polished cast 316L 316L stainless highly polished steel. stainless 1/4”-28 stainless steel. steel. 1/4”-28 steel<br />
stainless st<br />
set screws included. set set screws included.<br />
F14-0077 7/8” O.D. 30 degree<br />
F14-0014 7/8” O.D. 45 degree<br />
Round Base Round Fittings<br />
Base Fittings<br />
F14-0040 7/8” O.D. 60 degree<br />
F14-0077<br />
F14-004<br />
F15-0140 1” O.D. 60 degree<br />
Please inquire about Please availability.<br />
Please inquire about about availability.<br />
F14-0039 7/8” O.D. 90 degree<br />
Part Number Part Part Tube Number Size Type Tube F15-0139 Size Size Type Type 1” O.D. 90 degree<br />
F14-0077 F14-0077 7/8” O.D. 30 7/8” F16-11439 degree 7/8” O.D. O.D. 30 30 degree 1 1/4” O.D. 90 degree<br />
F14-0014 F14-0014 7/8” O.D. 45 7/8” degree 7/8” O.D. O.D. 45 45 degree<br />
F14-0040 F14-0040 7/8” O.D. 60 7/8” degree 7/8” O.D. O.D. 60 60 degree<br />
F14-0077 F14-0077 F14-0040<br />
F15-0140 F15-0140 1” O.D. 60 1” Rectangle degree 1” O.D. O.D. Base 60 60 degree<br />
Fittings<br />
F14-0040<br />
F14-0039 F15-0140<br />
F15-0140<br />
F15-0139<br />
F14-0039 F14-0039 7/8” O.D. 90 7/8” Please degree 7/8” O.D. O.D. inquire about 90 90 degree availability.<br />
F15-0139 F15-0139 1” O.D. 90 1” degree 1” O.D. O.D. 90 90 degree<br />
Part Tube Type<br />
F16-11439 F16-11439 1 1/4” O.D. 90 1 1/4” degree 1 1/4” O.D. O.D. 90 90 degree<br />
F14-0078 7/8” O.D. 30 degree<br />
F14-0039 F14-0039 F15-0139 F15-0139 F16-11439<br />
F16-11439<br />
Rectangle Base Rectangle FittingsBase F15-0178 Fittings<br />
1” O.D. 30 degree<br />
F14-0015 7/8” O.D. 45 degree F14-0078 F15-0178<br />
F14-0015 F15-011<br />
Please inquire about Please availability.<br />
Please inquire about about availability. F15-0115 1” O.D. 45 degree<br />
Part TubePart PartType<br />
Tube F14-0042 Type Type7/8” O.D. 60 degree<br />
Number SizeNumber<br />
Size Size F15-0142 1” O.D. 60 degree<br />
F14-0078 7/8” O.D. F14-0078 30 degree 7/8” 7/8” O.D. O.D. F14-0041 30 30 degree<br />
7/8” O.D. 90 degree<br />
F15-0178 1” O.D. F15-0178 30 degree 1” 1” O.D. O.D. F15-0141 30 30 degree<br />
1” O.D. 90 degree<br />
F14-0015 7/8” O.D. F14-0015 45 degree 7/8” 7/8” O.D. O.D. F16-11441 F14-0078 45 45 degree<br />
1 1/4” O.D. F14-0078<br />
F15-0178<br />
90 degree F15-0178<br />
F14-0015 F14-0015 F15-0115<br />
F15-0115<br />
F14-0042<br />
F14-0042<br />
F15-0142<br />
F14-0041 F15-01<br />
F15-0115 1” O.D. F15-0115 45 degree 1” 1” O.D. O.D. 45 45 degree<br />
F14-0042 7/8” O.D. F14-0042 60 degree 7/8” 7/8” O.D. O.D. Universal 60 60 degree<br />
Tee Fittings<br />
F15-0142 1” O.D. F15-0142 60 degree 1” 1” O.D. O.D. 60 60 degree<br />
F14-0041 7/8” O.D. F14-0041 90 degree 7/8” 7/8” O.D. O.D. Please 90 90 inquire degree<br />
about availability.<br />
F15-0141 1” O.D. F15-0141 90 degree 1” 1” O.D. O.D. Part 90 Number 90 degree<br />
Tube Size Type<br />
F16-11441 1 1/4” F16-11441 O.D. 90 degree 1 1/4” 1 1/4” O.D. O.D. 90 90 degree<br />
F14-0093 7/8” O.D. F15-0142 60 degree F15-0142 F14-0041<br />
F14-0041<br />
F15-0141<br />
F15-0141<br />
F16-11441<br />
F16-1144<br />
F14-0044 7/8” O.D. 60 degree set screw left<br />
Universal Tee Universal Fittings Tee Tee Fittings F14-0045 7/8” O.D. 60 degree set screw right<br />
F14-0043 7/8” O.D. 90 degree<br />
Please inquire about Please availability. Please inquire about about availability.<br />
F15-0193 1” O.D. 60 degree<br />
F14-0093 F14-0044<br />
Part Number Part Tube Part Number Size Type Tube F15-0143 Size Size Type Type 1” O.D. 90 degree<br />
F14-0093 F14-0093 7/8” O.D. 60 7/8” F16-11443* degree 7/8” O.D. O.D. 60 60 degree 1 1/4” O.D. 90 degree<br />
F14-0043 F14-0044 F14-0044 7/8” O.D. 60 90 7/8” degree 7/8” O.D. O.D. set screw 60 60 degree left<br />
set set screw left left<br />
F15-0193 F14-0045 F14-0045 1” 7/8” O.D. O.D. 60 7/8” degree 7/8” O.D. O.D. set screw 60 60 degree right<br />
set set screw right right<br />
F14-0093<br />
F15-0143 F14-0043 F14-0043 1” 7/8” O.D. O.D. 90 7/8” 90 degree 7/8” O.D. Degree O.D. 90 Elbow 90 degree<br />
F14-0093<br />
F14-0044 F14-0043 F14-0044 F14-0045<br />
F15-0193 F14-0045 F15-0143<br />
F16-11443 F15-0193 F15-0193 1” 1/4” O.D. O.D. 60 90 1” degree 1” O.D. O.D. 60 60 degree<br />
Please inquire about availability.<br />
F15-0143 F15-0143 1” O.D. 901” degree 1” O.D. O.D. 90 90 degree<br />
F16-11443* F16-11443* 1 1/4” O.D. 901 degree 1/4” Part 1 1/4” O.D. Number O.D. 90 90 degree<br />
Tube Size<br />
F14-0076 7/8” O.D.<br />
F15-0176 1” O.D.<br />
F14-0043 F14-0043<br />
F15-0193 F15-0193 F15-0143<br />
F15-0143<br />
F16-11443<br />
F16-11443<br />
F16-11476 1 1/4” O.D.<br />
F14-0076<br />
F15-0176<br />
90 Degree Elbow 90 90 Degree Elbow<br />
All Stainless Steel Rail Fittings are made of high quality cast 316L highly polished stainless steel. 1<br />
set screws included.<br />
Round Base Fittings<br />
Please inquire about availability.<br />
Number<br />
Size<br />
Please inquire about Please availability. Please inquire about about availability.<br />
Part Number Part Part Number<br />
Tube Size Tube Size Size<br />
F14-0076 F14-0076 7/8” O.D. 7/8” 7/8” O.D. O.D.<br />
F15-0176 F15-0176 1” O.D. 1” 1” O.D. O.D.<br />
F16-11476 F16-11476 1 1/4” O.D. 1 1/4” 1 1/4” O.D. O.D. F14-0076 F14-0076<br />
F15-0176 F15-0176<br />
F16-11476 F16-1147<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com<br />
Enfocus Software - Customer Support
STAINLESS STEEL FITTINGS<br />
Railing Products<br />
All Stainless Steel Rail Fittings are made of high quality cast 316L highly polished stainless steel. 1/4”-28 stainless steel<br />
set screws included.<br />
Bow Forms<br />
Please inquire for about availability.<br />
Part Number Tube Size Type<br />
F14-0051 7/8” O.D. 110 degree<br />
RAILING PRODUCTS<br />
Hand Rail Fittings for a #10 Fastener<br />
F14-0051<br />
61<br />
Please inquire for about availability.<br />
** Asterisked part numbers come without set screws.<br />
Part Number Tube Size Type<br />
F14-0081** 7/8” O.D. Aft 60 degree<br />
F15-0181** 1” O.D. Aft 60 degree<br />
F14-0079** 7/8” O.D. Center 60 degree<br />
F15-0179** 1” O.D. Center 60 degree<br />
F14-0215 7/8” O.D. Center 60 degree<br />
F14-0216 7/8” O.D. Center 60 degree<br />
F14-0225 7/8” O.D. Aft 60 degree left<br />
F14-0226 7/8” O.D. Aft 60 degree right<br />
F14-0080 ** 7/8” O.D. Forward 120 degree<br />
F15-0180 ** 1” O.D. Forward 120 degree<br />
F14-0081<br />
F14-0215<br />
F15-0181<br />
F14-0225<br />
F14-0079<br />
F14-0226<br />
F15-0179<br />
F14-0080<br />
Stainless Steel Set Screws<br />
Part Number<br />
Description<br />
F92-3000 1/4”-28 x 3/16”<br />
100 per bag<br />
F92-3000<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
RAILING PRODUCTS<br />
62<br />
STAINLESS STEEL WELDING PADS<br />
Railing Products<br />
High quality precision welding pads for your railing fabrication needs. Stamped from 316 stainless steel, these pads<br />
have a high polished finish and drilled for 1/4” screws.<br />
Round Pads<br />
Outer<br />
Part Number Dimension Thickness Hole<br />
F10-0001P 2 3/8” .120”<br />
120 degree holes<br />
F10-0002P 2 3/8” .120”<br />
90 degree holes<br />
F10-0003P 2 7/8” .120”<br />
120 degree holes<br />
F10-0001P F10-0002P F10-0003P<br />
Rectangular and Oval Pads<br />
Part Number Length Width Thickness Fastener Holes<br />
F10-0004P 3 1/8” 1 3/4” .120”<br />
4<br />
F10-0006P 3 1/4” 1 1/2” .135”<br />
2<br />
F10-0004P<br />
F10-0006P<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HINGES<br />
• Terminology<br />
• Continuous Hinges<br />
• Stainless Steel Stamped<br />
Hinges<br />
• Miscellaneous Hinges<br />
HINGES<br />
63<br />
“On a scale of 1-10, <strong>Morse</strong><br />
<strong>Industries</strong> scores a 9.5. We<br />
can rely on them to provide<br />
frequent deliveries and to ship<br />
our orders on time.”<br />
Fineline <strong>Industries</strong><br />
centurionboats.com<br />
1.800.325.7513 www.morseindustries.com
Terminology<br />
Hinges<br />
HINGES<br />
Terminology<br />
Thic kness<br />
Hinge<br />
Length<br />
64<br />
Overall<br />
Width<br />
(open)<br />
Knuckle<br />
Length<br />
Pin Diameter<br />
Leaf<br />
Width<br />
This symbol<br />
indicates operating<br />
range of<br />
the hinge from<br />
a fully closed<br />
position.<br />
Custom Fabricated Hinges<br />
Inquire for special requirements and custom needs. With minimum quantities, <strong>Morse</strong> <strong>Industries</strong> can service in the following areas:<br />
Cutting:<br />
Perforating:<br />
Forming:<br />
Continuous Hinges can be cut to exact lengths. Hinges should be cut to multiples of knuckle length<br />
to eliminate partial knuckles.<br />
Available in many styles. Indicate type and hole diameter, hole centers, edge dimensions and end<br />
dimensions, and if either staggered or in-line.<br />
Hinge leaves can be formed in a variety of configurations. Dimensions should be measured from the<br />
pin center line and inside of formed leaf.<br />
Both leaves formed up 90 degrees One leaf formed up 90 degrees Both leaves formed down 90 degrees<br />
Swagging:<br />
Finishing:<br />
Forming one or both leaves toward or beyond the center of the pin<br />
Painting is available on all hinges. Anodizing for aluminum, polishing and sanding for stainless steel.<br />
Note: Furnish blueprint, dimensional sketch or full information if any of the following is required:<br />
• Special gauges, pins or widths<br />
• Leaf styles<br />
• Cut-outs, notches, special forming or offsets<br />
• Holes (plain or countersunk), screw size or rivet size and locations<br />
• Special pin staking, heading or welding.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HINGES<br />
Continuous Hinges<br />
Aluminum Hinges<br />
All Aluminum Hinges are mill finish 72” lengths, .060 gauge with 3/16” holes punched on 2” centers. Undrilled and other styles and sizes are available<br />
on request. *H11-4506D72 is a formed boat seat hinge drilled 3/16” hole with 2” staggered 1” double offset.<br />
Part Number<br />
H11-2006D72 2”<br />
H11-3006D72 3”<br />
H11-4506D72* 2 1/2”<br />
Open Width<br />
HINGES<br />
65<br />
Aluminum Offset Hinge 72”<br />
Mill finish, drilled.<br />
Part Number<br />
Description<br />
H11-3014D72 1” x 2.250”<br />
H11-2006D72<br />
H11-4506D72<br />
Stainless Steel Hinges<br />
All Stainless Steel Hinges are Type 304, 72” lengths with .040 gauge, drilled and countersunk on 2” centers. Other styles and sizes are available<br />
on request.<br />
Part Number Open Width Fastener Size Holes<br />
H14-0034P72 3/4” #4 Opposing<br />
H14-0116A72 1 1/16” #5 Opposing<br />
H14-0114A72 1 1/4” #5 Staggered<br />
H14-0112A72 1 1/2” #6 Staggered<br />
H14-0200A72 2” #6 Opposing<br />
H11-3014D72<br />
H14-0116A72<br />
H14-0200A72<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
HINGES<br />
Stamped Stainless<br />
HINGES<br />
66<br />
Unless otherwise specified, Stamped Stainless Hinges are type 304 electro-polished and drilled and countersunk for<br />
#8 fasteners.<br />
Butt Hinges<br />
* H20-0300 drilled and countersunk for #10 fasteners.<br />
Part Number Open Width Pin Length Gauge<br />
H20-0112 1 1/2” 2” .060<br />
H20-0200 2” 2” .060<br />
H20-0230 2” 3” .060<br />
H21-0132 1 5/16” 1 1/2” .060<br />
H20-0300* 3” 3” .060<br />
H20-0230<br />
Offset Butt Hinges<br />
Part Number Open Width Pin Length Gauge Offset<br />
H21-0133 1 5/16” 1 1/2” .060 3/8”<br />
H20-0213 2 3/16” 2” .060 1/2”<br />
Bi-Fold Door Hinges<br />
* H20-0320 comes with nylon washers and drilled and countersunk for #10 fasteners.<br />
Part Number Open Width Pin Length Gauge<br />
H20-0310 2 5/16” 3 7/16” .060<br />
H20-0320* 2” 4” .090<br />
H21-0133<br />
H20-0213<br />
H20-0320<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
Miscellaneous Hinges<br />
Hinges<br />
Take Apart Motor Box Hinge<br />
Ordered in pairs. Heavy duty 316 cast stainless steel for #10 fastener.<br />
Part Number Description<br />
H30-1090L 1 1/2” X 3 1/2” Left<br />
H30-1090R 1 1/2” X 3 1/2” Right<br />
HINGES<br />
67<br />
Long Reach Hatch Hinge<br />
Heavy duty 316 cast stainless steel for #10 fastener.<br />
Part Number Description<br />
H20-9505 3 1/2” X 2 1/2”<br />
Heavy Duty Cast Stainless Steel Hinges<br />
Heavy duty 316 cast stainless steel.<br />
Part Number Description<br />
H30-1030 1 1/2” X 1 1/2” Butt Hinge #10<br />
H30-1040 2” X 2” Butt Hinge #10<br />
H30-1050 1 1/2” X 3” Utility Hinge #8<br />
H30-1060 1 1/2” X 4” Utility Hinge #10<br />
H30-1070 1 1/2” X 2 1/4” Utility Hinge #10<br />
H30-1080 1 1/2” X 3” Utility Hinge #10<br />
H30-1010 4” X 1” Strap Hinge #10<br />
H30-1020 6” X 1” Strap Hinge #10<br />
H30-1015 3” X 1 1/4” Swivel Hinge #8<br />
Fastener<br />
Butt<br />
Hinge<br />
Utility<br />
Hinge<br />
Strap<br />
Hinge<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
STAINLESS STEEL STAMPED HINGES<br />
Hinges<br />
HINGES<br />
Unless otherwise specified, Stamped Stainless Hinges are type 304 electro-polished and drilled and countersunk for<br />
#8 fasteners.<br />
Hasp with Swivel Latch<br />
Part Number Pin Length Open Length<br />
H90-0300 1” 3 1/2”<br />
68<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
“As a manufacturer of marker boards, chalk boards,<br />
shower doors, and mirrors, we are always looking<br />
for innovative solutions for our design needs.<br />
<strong>Morse</strong> <strong>Industries</strong> is very responsive in providing<br />
these solutions from the creation of our custom<br />
dies through delivery of our finished extrusions.”<br />
Venus Manufacturing<br />
venusmfg.com<br />
CUSTOM PRODUCTS<br />
• Aluminum Extrusions<br />
• Vinyl Extrusions<br />
• Stainless Cast Fittings<br />
• Fabrication - Stainless<br />
and Aluminum<br />
• Injection Molded Nylon<br />
Hardware<br />
• CNC Fabrication<br />
• Stainless Stamped<br />
Hardware<br />
• Assembling<br />
<br />
<br />
CUSTOM PRODUCTS<br />
69<br />
1.800.325.7513 www.morseindustries.com
CUSTOM PRODUCTS<br />
70<br />
CUSTOM PRODUCTS<br />
For nearly 30 years, manufacturers have relied on <strong>Morse</strong> <strong>Industries</strong> to produce and distribute the highest<br />
quality custom products to meet many diverse needs. Our past history and strong commitment has made<br />
<strong>Morse</strong> <strong>Industries</strong> a recognized leader and world class supplier in today’s market.<br />
<strong>Morse</strong> <strong>Industries</strong> operates as a “full service” organization. If you have special<br />
requirements that are not shown within these pages, please contact us. We<br />
are most anxious to help with your individual needs. Our Sales and Design<br />
Consultants assist in taking an order from design, to construction of dies and<br />
tooling, through production, fabrication, finishing and then follow through with<br />
the order until it reaches your receiving door. We offer personalized service<br />
you can rely on.<br />
• Aluminum Extrusions<br />
• Vinyl Extrusions<br />
• Stainless Steel Tubing<br />
• Stainless Cast Fittings<br />
• Stainless Stamped Hardware<br />
• Injection Molded Nylon Hardware<br />
• CNC Fabrication<br />
• Pre-formed Stainless Steel Rub Rails<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
ALUMINUM POINTS<br />
Custom Products<br />
<strong>Morse</strong> <strong>Industries</strong> provides a total solution for your extrusion needs. We help you engineer your designs, create<br />
dies and extrude aluminum products to your specifications. Unlike other extruders, we have the ability to<br />
manage the inventory of your finished products in one of our warehouses for just-in-time delivery.<br />
Aluminum Extrusions<br />
Our goal is to give our customers a feel for what is required to have a custom profile produced. Lead times must be calculated after all factors<br />
are considered.<br />
Alloys<br />
The most common alloys we provide are 6063, 6463, 6061 and 6005. Common tempers include T1, T4, T5, T6 and T832. Temper numbers indicate<br />
the age hardening of aluminum.<br />
Finishes and Coatings<br />
We offer the following colors (polished bright chrome, bright chrome, polished bright gold, bright gold, clear satin,<br />
mill finish, dark bronze, oil rub bronze, oil rub bronze metallic, brushed nickel, black and white).<br />
Anodized clear and bright dip.<br />
Anodized two-step hard coat.<br />
Color tinting.<br />
Electro-static wet paint.<br />
Powder coat.<br />
Mill finish, as extruded.<br />
Buffing, brushing and texturing.<br />
Fabrication<br />
Cutting to length (+/– 1/16” standard).<br />
Drill and countersink.<br />
Punching and slotting.<br />
Drilling and tapping.<br />
Notching.<br />
Angle cuts.<br />
Stamping.<br />
Packaging<br />
Cardboard carton or tubes.<br />
Spiral wrap (carton or pallet).<br />
Single poly sleeve.<br />
Paper interleaves.<br />
Heated shrink-wrap.<br />
CUSTOM PRODUCTS<br />
71<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
CUSTOM PRODUCTS<br />
72<br />
VINYL EXTRUSIONS<br />
Custom Products<br />
<strong>Morse</strong> <strong>Industries</strong> provides a total solution for your extrusion needs. We can help you engineer your designs,<br />
create dies and extrude vinyl products to your specifications. Unlike other extruders, we have the ability to<br />
manage the inventory of your finished products in one of our warehouses for just-in-time delivery.<br />
Vinyl Extrusions<br />
Our goal is to give our customers a feel for what is required to have a custom profile produced. Lead times must be calculated after all factors<br />
are considered.<br />
Material and Finishing<br />
Three basic material styles include rigid, semi-rigid and flexible compounds (or a combination known as co-extrusions).<br />
Materials come in several grades including interior and exterior pvc.<br />
Can be run in almost any color or color matched.<br />
Finishes range from high gloss, semi-gloss, to flat.<br />
The durometer of the vinyl indicates the softness or hardness of the extrusion.<br />
Packaging<br />
Cardboard cartons and tubes. Reels or coils.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
FITTINGS / HARDWARE / FABRICATION<br />
Custom Products<br />
Stainless Cast Fittings<br />
<strong>Morse</strong> <strong>Industries</strong> can help you create superior quality fittings made from 316 marine grade stainless steel. Fittings are manufactured at a stateof-the-art<br />
foundry with every run tested for quality and workmanship. Each fitting is hand-polished and passivated to insure a beautiful, bright<br />
finish and long life in tough outdoor environments.<br />
Fabrication – Stainless and Aluminum<br />
<strong>Morse</strong> <strong>Industries</strong> can help you create superior quality metal hardware components for a wide range of applications including hinges, vents,<br />
brackets and housings. Parts can be tapped, assembled, flattened or coined as part of the process.<br />
‘Value Added’ Custom Fabrication, Assembly and Packaging<br />
Let us save you money by eliminating the costly labor necessary when doing your own fabrication. Our vendors have capabilities ranging from<br />
punching, slotting, drilling, CNC, welding, bending and more.<br />
CUSTOM PRODUCTS<br />
73<br />
<strong>Morse</strong> can be your one stop shop for fabrication, assembly and packaging through our ‘Value Added’ program. We will make the product, fabricate<br />
it to your specifications, source any additional items needed for the kit, assemble the contents and package it in such a way that you need only<br />
ship it to your customers. Our staff is there to assist you every step of the way.<br />
Injection Molded Nylon Hardware<br />
<strong>Morse</strong> <strong>Industries</strong> creates custom molds to your specifications. From the initial sketch through manufacturing and delivery of your plastic components,<br />
<strong>Morse</strong> <strong>Industries</strong> will manage the entire process.<br />
Material and Finishing<br />
Most common materials used are 66 military nylon and delrin plastic. Can be run in any color or color-matched.<br />
Fabrication<br />
Drilling.<br />
Countersinking.<br />
Tapping.<br />
CNC Aluminum Fabrication<br />
<strong>Morse</strong> <strong>Industries</strong> Computer Numerical Control (CNC) fabrication capabilities include laser cutting, punching and brake forming. The process<br />
offers flexibility for manufacturing runs in low volumes, often without the high costs associated with other processes.<br />
Common Uses<br />
Many new parts can be “prototyped” using CNC to test product viability. Then high volume production can be turned over to casting, stamping<br />
or injection molding.<br />
CNC also can be used to provide secondary fabrication to cast, stamped or injection molded products to further enhance their complex nature.<br />
Stainless Stamped Hardware<br />
<strong>Morse</strong> <strong>Industries</strong> can help you create superior quality metal hardware components for a wide range of applications including hinges, vents,<br />
brackets and housings. Parts can be tapped, assembled, flattened or coined as part of the process.<br />
The Stamping Process<br />
A coil or strip of stainless steel feeds into a press that runs the metal through a series of dies. Parts can then undergo further fabrication and<br />
finishing to customer’s specifications. There are four basic ways this can be done:<br />
A Compound Die process forms the part in one press of the stamping machine with a single station die.<br />
A Progressive Die process forms the part using a series of dies and press strokes. This is used for more complex shapes and bends.<br />
A Deep Draw process uses a series of dies and press strokes to form tubular shapes.<br />
A Laser Cutting process offers quick turnaround with little set-up time. It allows for high-speed cutting for generally a lower cost than<br />
other methods<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
REFERENCE MATERIALS<br />
• Shipping and Claims<br />
• Terms and Conditions<br />
• Decimal and Equivalents<br />
• Care and Cleaning of <br />
Stainless Steel<br />
REFERENCE MATERIALS<br />
74<br />
1.800.325.7513 www.morseindustries.com
REFERENCE MATERIALS<br />
75<br />
SHIPPING & CLAIMS<br />
Shipping and Claims Policies<br />
Getting orders to our customers on time is a high priority at <strong>Morse</strong> <strong>Industries</strong>. We inspect all products and packaging to ensure orders reach<br />
customers in good condition. Please provide specific shipping instructions at the time of order. Without specific shipping instructions, <strong>Morse</strong><br />
<strong>Industries</strong> will choose what we believe is the best route of transportation.<br />
Shipping Damage or Loss:<br />
After the carrier assumes the product from <strong>Morse</strong> <strong>Industries</strong>, we are not responsible for any damage, delay or loss of the product.<br />
The carrier is responsible for any shipment damage, delay or loss in transit. Please inspect your shipments carefully at the<br />
time of delivery. If damage or shortage is visible, note such on the carrier delivery receipt and have the driver sign the receipt.<br />
<strong>Morse</strong> <strong>Industries</strong> will assist customers with the tracking of shipments and investigating reasons for damage or loss of product,<br />
but will assume no responsibility for said damage or loss.<br />
Concealed Damage:<br />
In the event of concealed damage or loss, contact the carrier in<br />
writing within 10 days of receipt of the product and request an<br />
inspection. Retain the container and all packing material for the<br />
carrier’s inspection.<br />
Shortages and Miss-Shipments:<br />
Report all shortages or miss-ships to <strong>Morse</strong> <strong>Industries</strong> within 7<br />
days after receipt of the product. Approval from <strong>Morse</strong> <strong>Industries</strong><br />
must be secured prior to returning any merchandise for<br />
credit.<br />
Returns:<br />
<strong>Morse</strong> <strong>Industries</strong> requires an RMA approval for all returns and<br />
a 20% restocking fee is assessed. Special order items are nonreturnable.<br />
All returns must be returned to <strong>Morse</strong> <strong>Industries</strong> in<br />
original condition within 30 days after approval in accordance to<br />
our shipping instructions.<br />
Minimums:<br />
There is a minimum order charge of $200 and truck deliveries<br />
are subject to our delivery schedule.<br />
Terms:<br />
Normal terms of net 30 days are granted to customers meeting<br />
our credit requirements. If you are interested in securing credit<br />
terms, please contact <strong>Morse</strong> <strong>Industries</strong> for a credit application.<br />
We will gladly ship products C.O.D. and we also accept Visa or<br />
Mastercard.<br />
Prices:<br />
Prices are subject to change without notification. Please confirm<br />
current pricing when placing your order.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
<strong>Morse</strong> <strong>Industries</strong><br />
TERMS, CONDITIONS OF SALE AND LIMITED WARRANTY<br />
1. This Is Entire Agreement. This Invoice constitutes the entire agreement between <strong>Morse</strong> <strong>Industries</strong> (“<strong>Morse</strong>”) and the Buyer, and it is a complete merger of all<br />
prior negotiations and agreements as to the products sold to Buyer by <strong>Morse</strong> listed on this Invoice. This Invoice supersedes any prior or contemporaneous<br />
oral, written or implied agreements about the products listed on this Invoice.<br />
2. Buyer’s Acceptance of Terms. Buyer’s acceptance of these Terms, Conditions of Sale and Limited Warranty (collectively, the “Terms”) will be indicated by:<br />
(1) Accepting the products delivered, or (2) failing to notify <strong>Morse</strong> within three days of delivery of any objection to the Terms. Unless buyer explicitly rejects<br />
all Terms or explicitly objects to specific terms, any contrary term contained in any document submitted by Buyer shall not be construed as a rejection; and<br />
Buyer’s acceptance of products or failure to notify <strong>Morse</strong> explicitly of such a rejection or objection shall constitute acceptance of the Terms by Buyer.<br />
3. Warranty Covers Only Specified Intended Uses. <strong>Morse</strong> standard products are warranted for the intended uses specified in current <strong>Morse</strong> product descriptions,<br />
brochures and catalogs (including, but not limited to, catalogs for marine products and architectural products). Regularly stocked standard products<br />
not included in <strong>Morse</strong> product descriptions, brochures or catalogs are warranted only for normal uses of such products in the ordinary course. <strong>Morse</strong><br />
products that are custom-made to Buyer’s specifications are warranted only for the intended uses as specified in writing in the specification included with<br />
this Invoice. There is no warranty for unintended uses, or for products damaged by misuse, unreasonable or improper use, accident, improper installation or<br />
fabrication, unauthorized modifications or repairs, lack of proper cleaning or maintenance, normal wear and tear, or other causes not due solely to defects<br />
in materials or workmanship. Buyer warrants that it alone has selected the products to be furnished by <strong>Morse</strong> hereunder and stipulates that it is not relying<br />
on <strong>Morse</strong>’s skill or judgment to select such products. Buyers of custom-made products additionally warrant that they alone have selected the products to be<br />
furnished by <strong>Morse</strong> hereunder and stipulate that they are not relying on <strong>Morse</strong>’s skill or judgment to select such products.<br />
4. <strong>Morse</strong> Limited Warranty.<br />
a. Conformity with Specifications. <strong>Morse</strong> warrants that its standard products conform to the specifications included in current <strong>Morse</strong> product descriptions,<br />
brochures and catalogs (dimensions, materials and tested capacities) within industry-standard tolerances. As to custom-made products and standard or<br />
regularly stocked products altered by <strong>Morse</strong> at Buyer’s direction, <strong>Morse</strong> warrants that such products also conform (within industry-standard tolerances) to<br />
the written specifications included with this Invoice.<br />
b. Freedom from Defects. Further, <strong>Morse</strong> warrants that its products will be free from defects in materials and workmanship, under normal use and service,<br />
for a period of one year from the invoice date.<br />
c. Warranty Applies Only to Buyer. This limited warranty applies only to the Buyer, not to any remote consumers or any other persons or entities other than<br />
the Buyer.<br />
d. Sole Remedy is Replacement of Defective Product. Buyer’s sole remedy under the limited warranty is replacement without charge of the defective product,<br />
as more fully detailed below. When the return of defective products is authorized by <strong>Morse</strong>, it will reimburse Buyer for the cost of standard shipping to<br />
return defective products to <strong>Morse</strong>, and it will ship replacement products to Buyer at <strong>Morse</strong>’s expense. Any expenses involved in the removal or reinstallation<br />
of defective products are not covered by this warranty.<br />
e. “<strong>Morse</strong> Limited Warranty” Defined. The above provisions (sub-paragraphs a-d) are referred to hereafter as the “<strong>Morse</strong> Limited Warranty.”<br />
Except for the MORSE Limited Warranty stated above, <strong>Morse</strong> makes no Other express or implied warranties or representations.<br />
The MORSE Limited Warranty does not include a warranty of merchantability or fitness for a particular purpose, and the<br />
duration of any such warranty of merchantability or fitness for a particular purpose that may be imposed by law shall be the<br />
same as the <strong>Morse</strong> Limited Warranty and totally excluded thereafter. Some states in the United States do not allow limitations on how long<br />
an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which<br />
vary from state to state.<br />
5. <strong>Morse</strong> Limited Warranty Excludes Consequential Damages. The replacement of defective PRODUCTS, as DETAILed below, shall be the sole<br />
remedy for the buyer and the sole liability of <strong>Morse</strong> for any breach of warranty. under aLL circumstances, <strong>Morse</strong> shall not be<br />
liable for the loss of time, loss of use, costs to remove or replace PRODUCTS, EXPEDITED shipping costs, inconvenience or other<br />
incidental, consequential or indirect damages, including, but not limited to, loss or damage to other personal property or loss<br />
of revenue, allegedly caused by a defective <strong>Morse</strong> product. Some states in the United States do not allow the exclusion or limitation of incidental<br />
or consequential damages, so the above limitation or exclusion may not apply to you. The <strong>Morse</strong> Limited Warranty gives you specific legal rights, and you<br />
may also have other rights that vary from state to state.<br />
6. Replacement Products Covered for Balance of One-Year Warranty Period. If allegedly defective products are returned to <strong>Morse</strong> and replaced under the<br />
<strong>Morse</strong> Limited Warranty, they shall become the property of <strong>Morse</strong>. The replacement of products will not extend the term of the warranty, but the replaced<br />
product will be covered for the balance of the original warranty period.<br />
7. Any Product Return Must Have Prior Return Authorization.<br />
a. Non-Defective Products: <strong>Morse</strong> will accept returns of standard, non-defective products only in “as-originally-shipped” condition. <strong>Morse</strong> will not accept<br />
returns of non-defective products that are custom-made, altered by <strong>Morse</strong> to Buyer’s specifications, altered by Buyer, or not currently stocked by <strong>Morse</strong>.<br />
Such returns require a return merchandise authorization and are subject to a 20% re-stocking charge; otherwise, the returned products will be re-shipped<br />
to the Buyer at the Buyer’s expense.<br />
b. Defective Products: Credit for defective products will not be issued without <strong>Morse</strong>’s return authorization. To obtain authorization, return requests must be<br />
mailed, faxed or e-mailed to our offices, and they must include an itemized list of products to be returned, the reasons for return, and the date and number<br />
of the <strong>Morse</strong> invoice.<br />
8. No Duty to Upgrade. <strong>Morse</strong> reserves the right to improve its products through changes in design, materials or manufacturing processes, without being<br />
obligated to incorporate such changes in products previously manufactured by it, or to notify Buyers or subsequent users of its previously manufactured<br />
products of such later changes.<br />
9. Warranty Dispute Procedures. Any court action concerning the Terms, including, but not limited to, the <strong>Morse</strong> Limited Warranty, must be filed in the courts<br />
located in King County, Washington, the laws of which (excluding its choice of law rules) shall be applied to any claim arising under the Terms, including, but<br />
not limited to, the <strong>Morse</strong> Limited Warranty. Should the court determine that <strong>Morse</strong> was the substantially prevailing party, Buyer agrees to reimburse <strong>Morse</strong><br />
for its reasonable expenses, including attorneys’ and experts’ fees, incurred in defending against Buyer’s claims.<br />
REFERENCE MATERIALS<br />
76<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
REFERENCE MATERIALS<br />
77<br />
Decimal and Equivalents<br />
Reference Materials<br />
Fraction Decimal Millimeters Fraction Decimal Millimeters<br />
1/64 .015625 0.39687 33/64 .515625 13.09671<br />
1/32 .03125 0.79374 17/32 .53123 13.49362<br />
3/64 .046875 1.19061 35/64 .546875 13.89045<br />
1/16 .0625 1.58748 9/16 .5625 14.28737<br />
5/64 .078125 1.98435 37/64 .578125 14.68419<br />
3/32 .09375 2.38123 19/32 .59375 15.08111<br />
7/64 .109375 2.77809 39/64 .609375 15.47793<br />
1/8 .125 3.17497 5/8 .625 15/87485<br />
9/64 .140625 3.57183 41/64 .640625 16.27167<br />
5/32 .15625 3.96871 21/32 .65625 16.66859<br />
11/64 .171875 4.36557 43/64 .671875 17.06541<br />
3/16 .1875 4.76245 11/16 .6875 17.46234<br />
13/64 .203125 5.15931 45/64 .703125 17.85915<br />
7/32 .21875 5.55620 23/32 .71875 18.25608<br />
15/64 .234375 5.95305 47/64 .734375 18.65289<br />
1/4 .25 6.34994 3/4 .750 19.04982<br />
17/64 .265625 6.74679 49/64 .765645 19.44663<br />
9/32 .28125 7.14368 25/32 .78125 19.84356<br />
19/64 .296875 7.54053 51/64 .796875 20.24037<br />
5/16 .3125 7.93743 13/16 .8125 20.63731<br />
21/64 .328125 8.33427 53/64 .828125 21.03411<br />
11/32 .34375 8.73117 27/32 .84375 21.43105<br />
23/64 .359375 9.12801 55/64 .859375 21.82785<br />
3/8 .375 9.52491 7/8 .875 22.22479<br />
25/64 .390625 9.92175 57/64 .890625 22.62159<br />
13/32 .40625 10.31865 29/32 .90625 23.01853<br />
27/64 .421895 10.71549 59/64 .921875 23.41533<br />
7/16 .4375 11.11240 15/16 .9375 23.81228<br />
29/64 .453125 11.50923 61/64 .953125 24.20907<br />
15/32 .46875 11.90614 31/32 .96875 24.60602<br />
31/64 .484375 12.30297 63/64 .984375 25.00281<br />
1/2 .5 12.69988 1 1.0 25.39977<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
CARE AND CLEANING OF STAINLESS STEEL<br />
Reference Materials<br />
Introduction<br />
Cleanliness and stainless steel are closely related and, in many applications, each is dependent upon the other. In the handling of<br />
food, chemicals, pharmaceuticals and in the use of stainless steel as a construction material (roofs, wall panels, entry ways,<br />
signs, etc. ), stainless steel provides the degree of corrosion resistance that is necessary to prevent product contamination or<br />
surface rusting. However, stainless steel performs best when clean - cleanliness is essential for maximum resistance to corrosion.<br />
This handbook describes various practices for cleaning stainless steel during manufacture and in use. This includes methods for<br />
removing free-iron contamination on stainless steel surfaces that may have been picked up from metalworking tools; and for<br />
removing general accumulation of dirt, grime and surface stains that occur during normal handling and exposure to the elements.<br />
The reader should keep in mind that there are few specific rules for a cleaning procedure. Accordingly, the methods discussed in<br />
this handbook are suggestions. Each manufacturer or user, after obtaining competent advice with respect to their individual<br />
requirements, should select methods appropriate to those requirements.<br />
REFERENCE MATERIALS<br />
78<br />
What is Stainless Steel<br />
Stainless steel is not a single alloy, but rather the name applies to a group of iron-based alloys containing a minimum 10.5%<br />
chromium. Other elements are added and the chromium content increased to improve the corrosion resistance and heat resisting<br />
properties, enhance mechanical properties, and/or improve fabricating characteristics. There are over 50 stainless steel grades<br />
that were originally recognized by the American Iron and Steel Institute (AISI). Three general classifications are used to identify<br />
stainless steel. They are:<br />
1. Metallurgical structure.<br />
2. The AISI numbering system (200, 300 and 400 series numbers).<br />
3. The Unified Numbering System, which was developed by the American Society for Testing Materials (ASTM) and the Society<br />
of Automotive Engineers (SAE) to apply to all commercial metals and alloys.<br />
The various types of stainless steel are detailed in a designer handbook, "Design Guidelines for the Selection and Use of Stainless<br />
Steel," available from the Specialty Steel Industry of North America (SSINA). Several other publications are also available, including:<br />
"Stainless Steel Fabrication", "Stainless Steel Fasteners", "Stainless Steel Finishes", "Stainless Steel Specifications", and "Stainless<br />
Steel Architectural Facts", to mention a few.<br />
Alloy Types<br />
304 is the basic chromium-nickel austenitic stainless steel and has been found suitable for a wide range of applications. It is the<br />
most readily available in a variety of product forms. This grade is easy to form and fabricate with excellent resistance to corrosion.<br />
304L is the low carbon version of 304. It is sometimes specified where extensive welding will be done.<br />
316 offers more corrosion-resistance through the addition of molybdenum. This grade is desirable where the possibility of severe<br />
corrosion exists, such as heavy industrial atmospheres and marine environments.<br />
316L is the low carbon version of 316.<br />
430 is a straight chromium ferritic stainless steel with lower corrosion resistance than the 300 series, It is principally employed for<br />
interior use.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
REFERENCE MATERIALS<br />
REFERENCE MATERIALS<br />
79<br />
CARE AND CLEANING OF STAINLESS STEEL<br />
Reference Materials<br />
Forms and Finishes<br />
Sheet, strip, plate and bar forms are shown in Table 1. Sheet finishes are shown in Table 2. Bar product conditions and finishes are<br />
shown in Table 3. Plate is shown in Table 4. In addition to the common mill and polished finishes, there are numerous special finishes<br />
used for architectural applications. Some of the more delicate finishes require special precautions when cleaning and the advice of<br />
the supplier should be obtained. The most<br />
common special finishes are shown in Table 5.<br />
Cleaning of Stainless Steel<br />
Stainless steels need to be cleaned for<br />
aesthetic considerations and to preserve<br />
corrosion resistance. Stainless steel is<br />
protected from corrosion by a thin layer of<br />
chromium oxide. Oxygen from the atmosphere<br />
combines with the chromium in the stainless<br />
steel to form this passive chromium oxide film<br />
that protects from further corrosion. Any<br />
contamination of the surface by dirt, or other<br />
material, hinders this passivation process and<br />
traps corrosive agents, reducing corrosion<br />
protection. Thus, some form of routine<br />
cleaning is necessary to preserve the<br />
appearance and integrity of the surface.<br />
Stainless steels are easily cleaned by many<br />
different methods. They actually thrive with<br />
frequent cleanings, and, unlike some other<br />
materials, it is impossible to "wear out"<br />
stainless steel by excessive cleaning. The<br />
effect of surface/pattern roughness, grain/<br />
pattern orientation, and designs that allow for<br />
maximum rain cleaning (exterior applications)<br />
should be considered.<br />
Table 1 Classification of Stainless Steel Product Forms<br />
Item Description Dimensions<br />
Thickness<br />
Sheet<br />
Strip<br />
Plate<br />
Bar<br />
Wire<br />
Pipe &<br />
Tubing<br />
Extrusions<br />
Coil and cut lengths:<br />
Mill finishes Nos. 1, 2D, & 2B<br />
Pol. finishes Nos. 3, 4, 6, 7 & 8<br />
Cold finished, coils or cut lengths<br />
Pol. finishes Nos. 3, 4, 6, 7 & 8<br />
Flat rolled or forged<br />
Hot finished rounds, squares,<br />
octagons and hexagons<br />
Hot finished flats<br />
Cold finished rounds, squares,<br />
octagons and hexagons<br />
Cold finished flats<br />
Cold finishes only: (in coil)<br />
Round, square, octagon,<br />
hexagon, and flat wire<br />
S C C S S S<br />
Unpolished or Rolled Finishes:<br />
under 3/16" (4.76mm)<br />
under 3/16" (4.76mm)<br />
under 3/16" (4.76mm)<br />
under 3/16" (4.76mm)<br />
3/16" (4.76mm) & over<br />
1/8" (3.18mm) to<br />
8" (203mm) incl.<br />
1/8" (3.18mm) to<br />
4 1/2" (114mm)<br />
under 3/16" (4.76mm)<br />
Width<br />
24" (609.6mm) & over<br />
all widths<br />
under 24" (609.6mm)<br />
all widths<br />
over 10" (254mm)<br />
1/4" (6.35mm) to<br />
10" (254mm) incl.<br />
3/8" (9.53mm) to<br />
4 1/2" (114mm)<br />
under 3/8" (9.53mm)<br />
Several different classifications, with differing specifications, are available. For information<br />
on standard sizes, consult your local Steel Service Center or the SSINA.<br />
Not considered "standard" shapes, but of potentially wide interest. Currently limited in size to<br />
approximately 6 1/2" (135.1mm) diameter, or structurals.<br />
Table 2 Standard Mechanical Sheet Finishes<br />
Diameter or Size<br />
1/4" (6.35mm) & over<br />
over 1/8" (3.18mm)<br />
Types of Surface Contaminants<br />
DIRT: Like any surface that is exposed to the<br />
environment, stainless steel can get dirty. Dirt<br />
and soil can consist of accumulated dust and<br />
a variety of contaminates that come from<br />
many sources, ranging from the wind to<br />
everyday use. These contaminates will vary<br />
greatly in their effect on appearance and<br />
corrosivity and ease of removal. While some<br />
may be easily removed, others may require<br />
specific cleaners for effective removal. It may<br />
be necessary to identify the contaminate or<br />
experiment with various cleaners. Frequently,<br />
warm water with or without a gentle<br />
detergent is sufficient. Next in order are mild<br />
non-scratching abrasive powders such as<br />
typical household cleaners. These can be<br />
No. 1 A rough, dull surface which results from hot rolling to the specified thickness<br />
followed by annealing and descaling.<br />
No. 2D A dull finish which results from cold rolling followed by annealing and descaling, and may perhaps get<br />
a light roll pass through unpolished rolls. A 2D finish is used where appearance is not of primary concern.<br />
No. 2B A bright, cold-rolled finish resulting in the same manner as No. 2D finish, except that the annealed and<br />
descaled sheet receives a final light roll pass through polished rolls. This is the general-purpose cold-rolled<br />
finish that can be used as is or as a preliminary step to polishing.<br />
Polished Finishes:<br />
No. 3<br />
No. 4<br />
No. 6<br />
No. 7<br />
No. 8<br />
An intermediate polish surface obtained by finishing with a 100-grit abrasive. Generally used where a<br />
semifinished polished surface is required. A No. 3 usually receives additional polishing during fabrication.<br />
A polished surface obtained by finishing with a 120-150 mesh abrasive, following initial grinding with coarser<br />
abrasives. This is a general-purpose bright finish with a visible "grain" which prevents mirror reflection.<br />
A dull satin finish having lower reflectivity than No. 4 finish in a medium of abrasive and oil. It is used for<br />
architectural applications and ornamentation where a higher luster is undesirable, and to contrast with<br />
brighter finishes.<br />
A highly reflective finish that is obtained by buffing finely ground surfaces but not to the extent of<br />
completely removing the "grit" lines. It is chiefly for architectural and ornamental purposes.<br />
The most reflective surface obtained by polishing with successively finer abrasives and buffing<br />
extensively until all grit lines from preliminary grinding operations are removed. It is used for applications<br />
such as mirrors and reflectors.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TERIALS<br />
CARE AND CLEANING OF STAINLESS STEEL<br />
Reference Materials<br />
used with warm water, bristle brushes,<br />
sponges or clean cloths. Ordinary carbon<br />
steel brushes or steel wool should be avoided<br />
as they may leave particles embedded on the<br />
surface which can lead to RUSTING. For more<br />
aggressive cleaning, a small amount of<br />
vinegar can be added to the scouring powder.<br />
Cleaning should always be followed by rinsing<br />
in hot water. When water contains mineral<br />
solids, which leave water spots, it is advisable<br />
to wipe the surface completely with dry<br />
towels.<br />
FINGERPRINTS AND STAINS: Fingerprints<br />
and mild stains resulting from normal use in<br />
consumer and architectural applications are<br />
the most common surface contaminates.<br />
Fortunately, these usually affect only<br />
appearance and seldom have an effect on<br />
corrosion resistance. They are easy to remove<br />
by a variety of simple cleaning methods.<br />
Fingerprints are probably the most<br />
troublesome marks to remove from the<br />
surface of smooth polished or bright finished<br />
stainless steel. Fortunately, they can be<br />
removed with glass cleaner or by gentle<br />
rubbing with a paste of soda ash (sodium<br />
carbonate) and water applied with a soft rag.<br />
Once again, this should be followed by a<br />
thorough warm water rinse. There are several<br />
special surface finishes where fingerprints<br />
present special problems: polished No. 6,<br />
etched, some abrasive blasted finishes, and<br />
light electrochemical colors applied over satin<br />
or brushed finishes. (NOTE: there are several<br />
finishes designed to withstand fingerprints:<br />
embossed, swirl patterns, lined patterns, etc.).<br />
SHOP OIL AND GREASE: Shop oils, which may<br />
carry grease, grit and metal chips, commonly<br />
produce surface soiling after many shop<br />
operations.Greases and other contaminates<br />
may also soil surfaces in food preparation and<br />
many other household and commercial<br />
situations. These soils may be corrosive in<br />
themselves or may not allow the surface to<br />
maintain passivity, and so periodic removal is<br />
a necessity. Initially, soap or detergent and<br />
water may be tried or a combination of<br />
detergent and water plus a solvent. The<br />
removal of oil and grease from stainless steel<br />
parts by immersion in chemical solvents is<br />
frequently used with cold-formed or machined<br />
Table 3 Conditions and Finishes for Bar<br />
Conditions<br />
Hot worked only<br />
Annealed or otherwise<br />
heat treated<br />
Annealed or cold worked<br />
to high tensile strength***<br />
Surface Finishes*<br />
* Surface finishes (b), (e), and (f) are applicable to round bars only.<br />
** Bars of the 4xx series stainless steels which are highly hardenable, such as Types 414, 420, 420F, 431, 440A<br />
440B and 440C, are annealed before before rough turning. Other hardenable grades such as Types 403, 410,<br />
416 and 416Se, may also require annealing depending on their composition and size.<br />
*** Produced in Types 302,303Se, 304 and 316.<br />
(a) Scale not removed (excluding spot conditioning)<br />
(b) Rough turned**<br />
(c) Pickled or blast cleaned and pickled<br />
(a) Scale not removed (excluding spot conditioning)<br />
(b) Rough turned<br />
(c) Pickled or blast cleaned and pickled<br />
(d) Cold drawn or cold rolled<br />
(e) Centerless ground<br />
(f) polished<br />
(d) Cold drawn or cold rolled<br />
(e) Centerless ground<br />
(f) polished<br />
Table 4 Conditions and Finishes for Plate<br />
Conditions<br />
Hot worked only<br />
Annealed or otherwise<br />
heat treated<br />
Annealed or cold worked<br />
to high tensile strength***<br />
Surface Finishes*<br />
* Surface finishes (b), (e), and (f) are applicable to round bars only.<br />
** Bars of the 4xx series stainless steels which are highly hardenable, such as Types 414, 420, 420F, 431, 440A<br />
440B and 440C, are annealed before before rough turning. Other hardenable grades such as Types 403, 410,<br />
416 and 416Se, may also require annealing depending on their composition and size.<br />
*** Produced in Types 302,303Se, 304 and 316.<br />
(a) Scale not removed (excluding spot conditioning)<br />
(b) Rough turned**<br />
(c) Pickled or blast cleaned and pickled<br />
(a) Scale not removed (excluding spot conditioning)<br />
(b) Rough turned<br />
(c) Pickled or blast cleaned and pickled<br />
(d) Cold drawn or cold rolled<br />
(e) Centerless ground<br />
(f) polished<br />
(d) Cold drawn or cold rolled<br />
(e) Centerless ground<br />
(f) polished<br />
Table 5 Special Stainless Steel Finishes<br />
Finish<br />
Selective Polishing<br />
Swirl<br />
Engine Turn<br />
Distressed<br />
Angel Hair<br />
Abrasive Blast<br />
Selective Etching<br />
Embossing<br />
Electrochemical<br />
Epoxy Paint<br />
Sputtering<br />
Plating<br />
Perforated Designs<br />
Description<br />
Selective polishing of unprotected areas to produce patterns<br />
Swirl patterns obtained with grinding wheels or stainless steel wire brushes<br />
Rings, circles or overlapping circles created with a CNC-operated machine<br />
Random scratch pattern covering entire surface<br />
Finer random scratch pattern<br />
Matte, uniform, blast media choice determines appearance<br />
Etching of selective surface areas to obtain pattern<br />
Raised patterns pressed into the the stainless by rolling<br />
Applied to cut sheets, numerous colors (also called INCO or light interference coloring)<br />
Applied to coils, full range of colors<br />
Thin layer of colored material applied to surface<br />
Electroplating with colored and/or precious metals<br />
Simple or elaborate patterns<br />
REFERENCE MATERIALS<br />
80<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
REFERENCE MA<br />
REFERENCE MATERIALS<br />
81<br />
CARE AND CLEANING OF STAINLESS STEEL<br />
Reference Materials<br />
parts that are laden with lubricants. This process, in its simplest form, consists of bringing liquid solvent into contact with the<br />
surface to be cleaned and allowing dissolution to take place; for example, trichloroethylene or similar liquid or stirring a batch of<br />
small parts in a container of solvent. Non-halgenated solvents, such as acetone, methyl alcohol, ethyl alcohol, methyl ethyl<br />
ketone, benzene, isopropyl alcohol, toluene, mineral spirits, and turpentine work well. Many of these solvents are widely used as<br />
individual cleaners, but there are thousands of blended or compound cleaners on the market. Users are advised to contact<br />
suppliers of solvents for information on their applications on stainless steel.<br />
Types of Cleaners and Methods: General Precautions<br />
In selecting cleaning practices, consider the possibility of scratching and the potential for post-cleaning corrosion caused by<br />
incompletely removed cleaners. Scratching can occur on a bright mirror finish by cleaners that contain hard abrasives, or even<br />
by "grit" in wash water. This is usually not a problem on dull finishes, or those surfaces with a coarse polishing grit. The best<br />
preventative measure is to avoid using abrasive cleaners unless absolutely necessary. When abrasives are needed, first experiment<br />
on a inconspicuous area. A "soft abrasive," such as pumice, should be used. Abrasives can permanently damage some colored<br />
and highly polished finishes. Advice should be obtained from the finish supplier when cleaning special finishes. Many cleaners<br />
contain corrosive ingredients which require thorough post-clean rinsing with clean water; however, thorough rinsing is<br />
recommended for all cleaning procedures.<br />
CLEAN WATER AND WIPE: The simplest, safest, and least costly method that will adequately do the job is always the best method.<br />
Stainless surfaces thrive with frequent cleaning because there is no surface coating to wear off stainless steels. A soft cloth and<br />
clean warm water should always be the first choice for mild stains and loose dirt and soils. A final rinse with clean water and a<br />
dry wipe will complete the process and eliminate the possibility of water stains.<br />
SOLVENT CLEANING: Organic solvents can be used to remove fresh fingerprints and oils and greases that have not had time to<br />
oxidize or decompose. The preferred solvent is one that does not contain chlorine, such as acetone, methyl alcohol and mineral<br />
spirits. There are many compounded or blended organic cleaners that are commercially available and attempt to optimize both<br />
cleanability and safety attributes. Cleaning can be accomplished by immersing smaller articles directly into the solvent, wiping with<br />
solvent-impregnated cloths, or by sophisticated vapor or spray methods. The wiping technique sometimes leaves a streaked surface.<br />
HOUSEHOLD CLEANERS: Household cleaners<br />
fall into two categories: detergent (nonabrasive)<br />
and abrasive cleaners. Both are<br />
effective for many mild dirt, stain and soil<br />
deposits, as well as light oils such as<br />
fingerprints. The abrasive cleaners are more<br />
effective but introduce the possibility of<br />
scratching the surface. However, the degree<br />
of abrasiveness will vary greatly with the<br />
particular product, and some brands will<br />
produce noticeable scratching on only the<br />
most highly polished and some colored<br />
surface. All these cleaners vary widely with<br />
respect to their acidity and the amount of<br />
chloride they contain. A neutral cleaner low<br />
in chloride is preferred unless the user is<br />
assured that the surface can be thoroughly<br />
rinsed after cleaning. The fact that the label<br />
states "for stainless steel" is no guarantee that<br />
the product is not abrasive, not acidic or low<br />
in chloride. The cleaning method generally<br />
employed with these cleaners is to apply them<br />
to the stainless surface and follow by cloth<br />
wiping, or to wipe directly with a cleaner-<br />
Table 6 Effective Cleaning Methods<br />
Job Cleaning Agents* Comments<br />
Routine Cleaning<br />
Fingerprints and<br />
Smears<br />
Stubborn Stains<br />
and Discoloration<br />
Grease and Blood<br />
Burnt-on or<br />
Baked-on Foods<br />
Grease and Oil<br />
Warm water, Soap, Ammonia, Detergent<br />
3M Stainless Steel Cleaner and Polish,<br />
Arcal 20, Lac-O-Nu, Lumin Wash, O'Cedar<br />
Cream Polish, Stainless Shine<br />
3M Stainless Steel Cleaner and Polish,<br />
Allchem Concentrated Cleaner, Samae,<br />
Twinkle, Cameo Copper Cleaner, Grade FFF<br />
or Grade F Italian Pumice, Whiting or talc,<br />
Liquid Nu Steel, Copper's or Revere Stainless<br />
Steel Cleaner, Household Cleaners, Lumin<br />
Cleaner, Zud Restoro, Sta-Clean, Highlite,<br />
Allen Polish, Penny-Brite, Copper-Brite<br />
Scotch-Brite Power Pad 2001, Easy-Off<br />
De-Grease-It, 4% to 6% hot solution of<br />
such agents as tri-sodium polyphosphate,<br />
5% to 15% caustic soda solution<br />
Any good commercial detergent or<br />
caustic cleanser.<br />
Apply with sponge or soft cloth.<br />
Can be used on all finishes.<br />
Provides barrier film to minimize<br />
fingerprints. Can be used on all<br />
finishes.<br />
Rub lightly, using dry damp cloth, in<br />
the direction of polish lines on the<br />
stainless steel.<br />
Excellent removal on acids, all finishes.<br />
Particularly useful where rubbing is not<br />
practical.<br />
Apply with sponge or soft cloth in<br />
direction of polish lines.<br />
* NOTE: Use of proprietary names is intended only to indicate a type of cleaner and does not constitute<br />
an endorsement. Omission of any proprietary cleanser does not imply its inadequacy. All products should<br />
be used in strict accordance with instructions on package.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
TERIALS<br />
CARE AND CLEANING OF STAINLESS STEEL<br />
Reference Materials<br />
impregnated soft cloth. In all cases, the cleaned surface should be thoroughly rinsed with clean water and wiped dry with a soft<br />
cloth if water streaking is a consideration.<br />
COMMERCIAL CLEANERS: Many commercial cleaners compounded from phosphates, synthetic detergents, and alkalis are<br />
available for the cleaning of severely soiled or stained stainless surfaces. When used with a variety of cleaning methods, these<br />
cleaners can safely provide effective cleaning. Manufactures should be consulted and their recommendations followed whenever<br />
using cleaners of this kind. The general precautions stated above also pertain to these cleaners.<br />
REFERENCE MATERIALS<br />
Care of Stainless Steel<br />
The cleaner stainless steel can be kept while in storage, being processed or during use, the greater the assurance of optimum<br />
corrosion resistance. Some tips on the care of stainless steel are listed below:<br />
1. Use paper or other protective wrapping on the surface of the stainless steel until processing is complete.*<br />
2. Handle stainless steel with clean gloves or cloths to guard against stains or finger marks.<br />
3. Avoid the use of oily rags or greasy cloths when wiping the surface.<br />
4. Do routine cleaning of exposed surfaces. Buildings with window washing systems can utilize this method to clean exterior<br />
panels.<br />
5. Where possible, after cleaning, rinse thoroughly with water.<br />
6. Cleaning with chloride-containing detergents must be avoided.<br />
7. Even the finest cleaning powders can scratch or burnish a mill-rolled finish. On polished finishes, rubbing or wiping should be<br />
done in the direction of the polish lines, NOT across them.<br />
8. DO NOT USE SOLVENTS in closed spaces or while smoking.<br />
82<br />
* Many adhesive-backed papers and plastic sheets or tape applied to stainless steel for protection "age" in fairly short periods of time and<br />
become extremely difficult to remove. Manufacturers should be contacted regarding information as to how long protective films or paper<br />
can be left in place.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
• Nearly 30 years of experience in the marine industry.<br />
• Multiple distribution facilities across the United States.<br />
• Proven track record with major manufacturers and distributors.<br />
• National Marine Manufacturers Association member.<br />
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com