Grass Elite Plus - Grass America, Inc.

eliteplus
Concealed Drawer Slides

Grass Elite Plus
Concealed undermount drawer slide
eliteplus
The innovative Elite Plus drawer slide
draws attention to the beauty of your
cabinetry and leaves the mounted
hardware completely out of sight. The
Elite Plus brings together the advances
of undermount technology with a
precision roller carriage. The Elite Plus
offers a new improved soft-closing action
with the Airmatic closing device. The
Airmatic uses natural, clean air to deliver
a soft, quiet closing action every time.
Offered in a full range of lengths for
frameless and face frame construction,
the Elite Plus features a full drawer extension
for maximum use of interior space.
It is a proven undermount slide with an
ample load capacity of 80 lbs. that meets
and exceeds ANSI/BHMA testing
standards. Grass Elite Plus is rated ANSI
/BHMA 156.9 grade 1 drawer slide
(Type B05011).
Year after year, Elite Plus enables drawers
to function quietly and flawlessly with the
quality construction and Grass standard
of excellence you have come to expect.
The Elite Plus is backed by the Grass
Limited Lifetime Warranty. It’s what’s
inside that counts, even when you can’t
see it. You can specify Elite Plus with
confidence.
3

Grass Elite Plus
Airmatic shock absorber system
eliteplus ... with an even better Soft-close action!
With Airmatic, the pulling force
needed to open an Elite Plus
equipped drawer is minimal.
The superb closing action will
surprise customers.
The repositioned Airmatic
damper and spring cam
action gives the Elite Plus an
improved closing action.
The Airmatic piston absorbs
the force and noise of a
slammed drawer and gently
allows the drawer to shut.
Increased steel thickness and additional
re-enforcement bar added to cabinet member
to reduce flexing. A larger cabinet
member front has been designed
rather than a cut out section.
The unique oil-free shock absorber utilizes only a
cushion of air for safe and hygienic use.
Redesigned damper holder for additional stability.
4

Grass Elite Plus
Installation and adjustment features
Standard locking device
with height adjustment
Flange mount locking device
with height adjustment
Self-aligning rear
mount brackets
Move green adjustment plate forward and back
The standard front locking device allows
aligning the height of the drawer. A
2.5mm [ 3 ⁄32”] upwards adjustment is
achieved via the green adjustment plate
by moving it forward and back.
Move green adjustment plate forward and back
This special front locking device features
a flange for easy mounting to the bottom
of the drawer. The height of the drawer
can be adjusted by 2.5mm [ 3 ⁄32”] via the
green adjustment plate.
Brackets self-align the drawer when
cabinets are out of square, ± 2mm [3/32”]
adjustment range.
Depth adjustment
For frameless or inset applications (when
blocked out)
Tilt adjustment
For frameless or inset applications (when
blocked out)
Frame stop tab
Use #7 Euro or wood screw for slotted locations.
Use #7 Euro or wood screw for slotted locations.
The depth position of the drawer is perfectly
aligned via slotted hole offering a
4mm [ 5 ⁄32”] adjustment range.
Use #7 Euro or wood screw.
The vertical slotted hole allows tilting the
drawer for perfect front alignment with a
4mm [ 5 ⁄32”] adjustment range.
The tab quickly locates the slide on the
face frame at the correct setback. Use a
flat head screwdriver to bend out the tab.
5

Grass Elite Plus 16
Full Extension Slide for 16mm [ 5 ⁄8”] maximum drawer side thickness
Description
• Slides mount underneath to give a full view of finely crafted drawers
• Zinc plated, roll formed steel components
• Precision, smooth-running synthetic roller carriages
• Airmatic shock absorber softly glides drawers to a stop
• Self-latching front locking devices have comfortable release levers for drawer removal
• Front locking device height adjustable 2.5mm [ 3 ⁄32”]
• Self-aligning rear brackets for face frame applications ±2mm [ 3 ⁄32”]
• Positive tracked right side, ± 1.5mm [ 1 ⁄16”] side tolerance on left side
• Self-closing springs engage 30mm [1 1 ⁄4”] before closed position
• Weight capacity: 80 lbs. dynamic, 100 lbs. static
• Exceeds ANSI/BHMA 156.9, grade 1, Type B05011 drawer slide, test standards
How to specify hardware:
1. Determine required drawer length - select drawer slide
2. Select front locking device - 1 left and 1 right required per drawer
3. Select rear mounting bracket - 2 required per drawer for face frame
applications only
Components
ID Description Drawer Length Reference # Item # (5 sets/box) Item # (200 sets bulk)
240 [ 9 7 ⁄16”] 7523-16/250/240 76028-03 -
1
Elite Plus
7523-16
with Airmatic
305 [ 12”] 7523-16/317/305 76030-03 -
381 [ 15”] 7523-16/394/381 76033-03 76033-12
457 [ 18”] 7523-16/470/457 76035-03 76035-12
533 [ 21”] 7523-16/550/533 76050-03 76050-12
ID Description Item # Pkg.
7523 Front locking 02614-03 5
2a
device kit* 02614-12 200
Locking device Left 02615-12 200
Locking device Right 02616-12 200
ID Description Item # Pkg.
7523 Front locking 02613-03 5
device kit*
2b
with flange 02613-12 200
Locking device Left 02611-12 200
Locking device Right 02612-12 200
*Kit: Right/Left locking device, (4) #6 x 1/2” flat head
phillips screws.
1
3
3
ID Description Item # Pkg.
3
7523 Universal
rear mount bracket
02051-15 300
Note: Plug-in brackets available on page 10.
2
a, b
2
a, b
1
6 U.S. Patent # 6,932,200 Dimensions in millimeters, fractional inch equivalents as noted.

Technical Specifications
Rear Bracket Position
Elite Plus 16 = 21 [13/16"]
Interior cabinet width (ICW)
Max. drawer side
Elite Plus 16 = 16 [5/8"]
17.5
[11/16"]
6"]
50
[1 15/16"]
Rear notch
6 [1/4"]
Min. top
clearance
Interior drawer width formula
Elite Plus 16 = ICW - 42 [1 5/8"]
Elite 19 . . . ICW - [1-15/16"]
13 [1/2"]
Recess
Opening height
- 20 [13/16"]
= Max. drawer height
11
[7/16"]
7
[9/32"]
For face frame
applications only.
Use minimum of 3
screws per bracket,
#6 x 1/2” truss head
screws.
32
[1 1/4"]
16
[5/8"]
21
[13/16"]
Frame
rail
Frame stile
9
[11/32"]
36.5
[1 7/16"]
14 [9/16"]
Bottom clearance
Ø6 x 10
[1/4" x 3/8"]
hole in back of drawer
for catch hook
25.5
[1"]
Calculation Outside Drawer Width
Drawer side
thickness
16
[ 5 ⁄8”]
15
[ 19 ⁄32”]
14
[ 9 ⁄16”]
13
[ 1 ⁄2”]
12
[ 15 ⁄32”]
Euro screw Ø5 x 13mm or #7 x 5/8” flat
head wood screw location on
panel cabinets
Airmatic bracket sits 1.5 [1/16"]
below cabinet member mid-way back
#7 wood screw
location at face frame
Deduct from
interior cabinet
width
10
[ 3 ⁄8”]
12
[ 15 ⁄32”]
14
[ 9 ⁄16”]
16
[ 5 ⁄8”]
18
[ 23 ⁄32”]
Assembly Details
Frameless Applications
32mm compatible
517 [20 3/8"]
421 [16 9/16"]
Reference #
Drawer
Length
Interior Cabinet Depth with
Universal Bracket
Minimum*
Maximum
7523-16/250/240 240 [9 7 ⁄16”] 259 [10 3 ⁄16”] 296 [11 5 ⁄8”]
7523-16/317/305 305 [12”] 329 [12 15 ⁄16”] 363 [14 5 ⁄16”]
7523-16/394/381 381 [15”] 407 [16”] 440 [17 5 ⁄16”]
7523-16/470/457 457 [18”] 479 [18 7 ⁄8”] 516 [20 5 ⁄16”]
7523-16/550/533 533 [21”] 562 [22 1 ⁄8”] 596 [23 7 ⁄16”]
*For frameless applications, deduct 1.5 [ 1 ⁄16”] for minimum interior
cabinet depth.
325 [12 13/16"]
293 [11 9/16"]
229 [9"]
Face Frame Applications
Cabinet Depth
305 [12"]
250/240*
37 32 96 64
64 32
96
96
250/240*
Interior depth
381 [15"]
Setback
4 [5/32"]
317/305*
64
Setback
4 [5/32"]
317/305*
457 [18"]
394/381*
54
394/381*
533 [21"]
470/457*
470/457*
610 [24"]
54
9
9
550/533*
19
192 96 96 78 54
550/533*
10
[3/8"]
Slotted hole locations for inset applications
*Cabinet member length / Drawer length (mm)
Subject to technical modifications without notice.
7

Grass Elite Plus 19
Full Extension Slide for 19mm [ 3 ⁄4”] maximum drawer side thickness
Description
• Slides mount underneath to give a full view of finely crafted drawers
• Zinc plated, roll formed steel components
• Precision, smooth-running synthetic roller carriages
• Airmatic shock absorber softly glides drawers to a stop
• Self-latching front locking devices have comfortable release levers for drawer removal
• Front locking device height adjustable 2.5mm [ 3 ⁄32”]
• Self-aligning rear brackets for face frame applications ±2mm [ 3 ⁄32”]
• Positive tracked right side, ± 1.5mm [ 1 ⁄16”] side tolerance on left side
• Self-closing springs engage 30mm [1 1 ⁄4”] before closed position
• Weight capacity: 80 lbs. dynamic, 100 lbs. static
• Exceeds ANSI/BHMA 156.9, grade 1, Type B05011 drawer slide, test standards
How to specify hardware:
1. Determine required drawer length - select drawer slide
2. Select front locking device - 1 left and 1 right required per drawer
3. Select rear mounting bracket - 2 required per drawer for face frame
applications only
Components
ID Description Drawer Length Reference # Item # (5 sets/box) Item # (200 sets bulk)
240 [ 9 7 ⁄16”] 7523-19/250/240 76029-03 -
1
Elite Plus
7523-19
with Airmatic
305 [ 12”] 7523-19/317/305 76032-03 -
381 [ 15”] 7523-19/394/381 76034-03 76034-12
457 [ 18”] 7523-19/470/457 76049-03 76049-12
533 [ 21”] 7523-19/550/533 76052-03 76052-12
ID Description Item # Pkg.
7523 Front locking 02614-03 5
2a
device kit* 02614-12 200
Locking device Left 02615-12 200
Locking device Right 02616-12 200
ID Description Item # Pkg.
7523 Front locking 02613-03 5
device kit*
2b
with flange 02613-12 200
Locking device Left 02611-12 200
Locking device Right 02612-12 200
3
3
*Kit: Right/Left locking device, (4) #6 x 1/2” flat head
phillips screws.
1
ID Description Item # Pkg.
3
7523 Universal
rear mount bracket
02051-15 300
2
a, b
1
Note: Plug-in brackets available on page 10.
2
a, b
8 U.S. Patent # 6,932,200 Dimensions in millimeters, fractional inch equivalents as noted.

Technical Specifications
Elite Plus 19 = 24.5 [15/16"]
50
[1 15/16"]
Rear notch
Interior cabinet width (ICW)
Interior drawer width formula
Elite Plus 19 = ICW - 49 [1 15/16"]
Elite 19 . . . ICW - [1-15/16"]
6 [1/4"]
Min. top
clearance
13 [1/2"]
Recess
Opening height
- 20 [13/16"]
= Max. drawer height
11
[7/16"]
7
[9/32"]
Max. drawer side
Elite Plus 19 = 19 [3/4"]
Rear Bracket Position
For face frame
applications only.
Use minimum of 3
screws per bracket,
# 6 x 1/2” truss
head screws.
32
[1 1/4"]
16
[5/8"]
21
[13/16"]
17.5
[11/16"]
Frame
rail
Frame stile
9
[11/32"]
36.5
[1 7/16"]
14 [9/16"]
Bottom clearance
Ø6 x 10
[1/4" x 3/8"]
hole in back of drawer
for catch hook
25.5
[1"]
Calculation Outside Drawer Width
Drawer side
thickness
19
[ 3 ⁄4”]
17
[ 11 ⁄16”]
16
[ 5 ⁄8”]
14
[ 9 ⁄16”]
13
[ 1 ⁄2”]
Euro screw Ø5 x 13mm or #7 x 5/8” flat
head wood screw location on
panel cabinets
Airmatic bracket sits 1.5 [1/16"]
below cabinet member mid-way back
#7 wood screw
location at face frame
Deduct from
interior cabinet
width
11
[ 7 ⁄16”]
15
[ 19 ⁄32”]
17
[ 11 ⁄16”]
21
[ 13 ⁄16”]
23
[ 7 ⁄8”]
Assembly Details
Frameless Applications
32mm compatible
517 [20 3/8"]
421 [16 9/16"]
Reference #
Drawer
Length
Interior Cabinet Depth with
Universal Bracket
Minimum*
Maximum
7523-19/250/240 240 [9 7 ⁄16”] 259 [10 3 ⁄16”] 296 [11 5 ⁄8”]
7523-19/317/305 305 [12”] 329 [12 15 ⁄16”] 363 [14 5 ⁄16”]
7523-19/394/381 381 [15”] 407 [16”] 440 [17 5 ⁄16”]
7523-19/470/457 457 [18”] 479 [18 7 ⁄8”] 516 [20 5 ⁄16”]
7523-19/550/533 533 [21”] 562 [22 1 ⁄8”] 596 [23 7 ⁄16”]
*For frameless applications, deduct 1.5 [ 1 ⁄16”] for minimum interior
cabinet depth.
325 [12 13/16"]
293 [11 9/16"]
229 [9"]
Face Frame Applications
Cabinet Depth
305 [12"]
250/240*
37 32 96 64
64 32
96
96
250/240*
Interior depth
381 [15"]
Setback
4 [5/32"]
317/305*
64
Setback
4 [5/32"]
317/305*
457 [18"]
394/381*
54
394/381*
533 [21"]
470/457*
470/457*
610 [24"]
54
9
9
550/533*
550/533*
19
192 96 96 78 54
10
[3/8"]
Slotted hole locations for inset applications
*Cabinet member length / Drawer length (mm)
Subject to technical modifications without notice. 9

Grass Elite Plus
V-notch Rear Mounting Brackets for face frame cabinetry
and drilling template
Rear Mounting Brackets, 19mm
• Side-to-side adjustment ± 6 [± 1 ⁄4”]
Description Side Item # Box Qty.
No socket
Ø
3
[1/8"]
Ø10
V-notch, metal,
no socket
V-notch, metal,
with socket
Left 02212-12 200
Right 02213-12 200
Left 02216-12 200
Right 02217-12 200
Left 02216-03 5
Right 02217-03 5
With socket
Frame
rail
32
[1 1/4"]
3
[1/8"]
Frame stile
Rear Mounting Brackets, 24mm
• Side-to-side adjustment ± 6 [± 1 ⁄4”]
Ø
3
[1/8"]
Ø10
Description Side Item # Box Qty.
V-notch, metal,
with socket
Left 02226-12 200
Right 02227-12 200
With socket
Frame
rail
32
[1 1/4"]
8
[5/16"]
Frame stile
Rear Mounting Brackets, 31.2mm
• Side-to-side adjustment ± 6 [± 1 ⁄4”]
3
[1/8"]
Ø10
Description Side Item # Box Qty.
V-notch, metal, Left 02220-12 200
no socket
Right 02221-12 200
Socket Non-handed 03274-12 200
Socket
No socket
Frame
rail
32
[1 1/4"]
15.2
[19/32"]
Frame stile
Drilling template
The Elite Plus drilling template is used to
precisely bore the holes in the drawer back that
receive the rear hook on the slide. Use with a
standard 1/4” drill bit and stop collar.
Left side drilling
Right side drilling
Description Item # Box Qty.
Elite Plus drilling
template
02511-01 1
10 Dimensions in millimeters, fractional inch equivalents as noted.

www.grassusa.com

eliteplus
Grass America Inc.
1202 Highway 66 South
Kernersville, NC 27284
Grass Canada Inc.
475 Finchdene Square, Unit 9
Toronto, ON M1X 1B7
Phone 1-800-334-3512
Fax 1-800-525-8406
Phone 1-800-461-4975
Fax 1-416-335-5907
Internet: www.grassusa.com
E-Mail: info@grassusa.com
Internet: www.grassusa.com
E-Mail: info@grassusa.com
Item# 01744-01 6/09 10M