4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

Repair and maintenance works on engine
The descriptions and instructions in this technical documentation should support you in use and repair of our
product. They refer to a specific equipment status of engine componets and accessories. Your individual
engine may be equipped with other or less accessory.
For any component not covered in this manual, please contact STEYR MOTORS GmbH, After Sales Service,
as to respective documentation.
This manual also contains specific references to your personal safety as user, as well as that of your
customers, their passengers and other persons being close to the engine/boat.
Product specifications, illustrations and technical data
When reference is made in this manual to a brand name, product number, product or specific tool, an
equivalent product may be used in place of the product or tool referred to, unless stated otherwise. To exclude
possible danger, the operator has to provide for adequate safety precautions.
All information, illustrations and specifications in this manual are based on the latest product data available at
the time of printing. It cannot be guaranteed that this manual is constantly updated. Revised versions edited at
a later date will replace all preceding editions.
Illustrations in this manual may not always correspond to actual implements or components and are
mainly intended as reference.
STEYR MOTORS GmbH reserves the right to make changes at any time, without notice, on technical
data or models and/or to discontinue models. The right is also reserved to change technical data or
components at any time, without incurring any obligation to retrofit new parts on models produced
prior to date of such change.
To guarantee proper function of the engine and its attached parts after a repair, correct assembly is of
utmost importance. Such works are to be carried out with greatest care, in accordance with repair
instructions.
WARRANTY:
Warranty claims will expire if repair, service and operation of the engine do not
correspond to the guidelines defined by STEYR MOTORS GmbH Please
address your warranty claims, in accordance with warranty regulations, directly to
the After Sales Service of STEYR MOTORS GmbH, Steyr.
Every STEYR dealer is obliged to fill out the warranty registration card enclosed to every sold
STEYR marine engine or every sold boat with a built-in STEYR marine engine.
Part 1 (Warranty Registration Card) is to be handed over to the customer, part 2 (Dealer Record
Card) remains with the dealer and part 3 is to be sent to the After Sales Service of STEYR
MOTORS GmbH.
This warranty registration card serves as a proof of ownership and is to be submitted in case
of warranty claims.
Every STEYR dealer is also obliged to carry out the Installation and pre-delivery inspection log.
One copy (completely filled out) of this Installation and pre-delivery inspection log is to be sent
to the After Sales Service of STEYR MOTORS GmbH.
Z001019/0_6_July 2008