Laboratory-dissolvers-mixers-mills

More documents

Recommendations

Info

Dispersing technology with vacuum in a one-step process DISPERMILL ® laboratory-dissolvers, will perform almost any mixing task in the modern laboratory, whether gentle stirring or where high shearing is required. The DISPERMILL® can produce outstanding results on most applications. Low noise drive system with continuous adjustable speed. Hightech PID electronics ensures constant speed even when viscosity changes. All DISPERMILL® dissolvers are complete with safety protection according to CE. Adjustable quick fit clamping device, integrated timer 0-100 min. Automatic stop. Emergency Mainswitch. Continuous readout of speed and time on digital display. Laboratory dissolver 250ml till 2 Litre model Orange-line Stainless steel stand, with Smooth action lifting device. Immersable parts made from stainless steel, several mixing tools available such as propeller and rotor/stator. Vacuum system for Dispermill Several products require processing under vacuum For this purpose we supply an additional vacuum kit which is easy to fit on all Dispermill® laboratory dissolvers. Available in 1, 3, 5, 8 and 12 Litre. 1D-2D D 2D-3D 0,5D-1D Correct use of the dissolver Best results will be achieved by following the guide dimensions as shown in the illustration. The peripheral speed of the disc should reach 20m/sec. Insert adapter for smaller vessels 1 into 5 Litre Laboratory vacuum dissolver 5 Litre model Yellow-line Model Speed Power Torque Voltage Orangeline Yellowline Ivoryline Ivory HT 2027 2075 2110 2200 0-10.000 RPM 0-9000 RPM 0-4500 RPM 0-2200 RPM 0,27kW / 0.4HP 0.75kW/ 1HP 1.1kW/ 1,5HP 1.1kW/ 1,5HP 0.5 Nm 1.3 Nm 3.6 Nm 7.6 Nm 230VAC +/-10% 230VAC +/-10% 230VAC +/-10% 230VAC +/-10% Redline 2150 0-9000 RPM 1.5kW/ 2HP 2.7 Nm 400VAC +/-10% Capacity 250ml - 2L 500ml - 8L 1L - 25L 1L - 25L 1L - 25L Blueline 2220 0-4500 RPM 2.2kW/ 3HP 7.3 Nm 400VAC +/-10% 10L - 50L ATEX 8400 930-8400 RPM 0.75kW/ 1HP 1.3 Nm 400VAC +/-10% 500ml - 8L ATEX 5800 930-4500 RPM 1.1kW/ 1.5HP 3.6 Nm 400VAC +/-10% 1L - 15L Dispermill ® , other Power and speed configurations on request.
Milling technology Mixing and milling in a one-step process • No waste during milling • Direct product control • Fast and easy cleaning • High efficiency due to optimal product flow. (no dead areas) • Many available accessories • Mirror polished dome • Patented system Millhead This patented basket guarantees an optimal flow and eliminates any possible “dead-zones” To accommodate the diversity of product range, different baskets are available. Standard upon delivery are 1 basket with 1 screen with a slot size of 0,5 mm. Other sizes can be delivered upon request. Media selection All kinds of milling media are applicable from 0,5 up to 1,8 mm in diameter but should be taken seriously. Inform yourself about the possibilities. The selection and matching of the media is still very critical. Our recommended beads are good for 10000 milling hours. Milling kit All parts in contact with the product are made from high quality hardened and stainless steel. The Millingkit comes with a jacketed vessel. The inlet and outlet water connections for the vessel are provided. Capacity Micromill Capacity Quartermill : 750 mL up to 2 Litre (1HP) : 5L up to 8 Litre (2HP) Marine propeller For low viscosity 1 - 3000 cps Turbo propeller Average viscosity 3000-6000 cps Pumperblade High viscosity > 6000 cps Micromill®
Page 1: Laboratory-dissolvers-mixers-mills

Laboratory-dissolvers-mixers-mills

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?