PRODUCTION RANGE - bresson

PRODUCTION RANGE
BRESSON a.s.
Brojova 2113/16, 326 00 Plzeň
Mailing address:
Prague office:
Ovčárecká 312, 280 02 Kolín V V Jámě 1/699, 110 00 Praha 1
Czech republic
Czech republic
Phone:+420 321 740 444 Phone: + 420 266 313 778
Fax: +420 321 725 268 Fax: + 420 266 312 699
E-mail: bresson@bresson.cz
www.bresson.cz

BRESSON a. s. Production Range 2002
BRESSON a. s. as the upholder of ČKD DUKLA and Strojírny Kolín [Enginering Works] manufactures
and supplies a wide range of the equipment required by power engineering, industries, thermal power
plants, heating plants, incinerators and exploitation of waste heat. Many of the items produced are used
for other purposes, too, and for the storage and transport of materials and liquids.
BRESSON a. s. continues in the traditional manufacture of boilers and associated equipment of boiler
rooms. Beginning from the sixtieth when the collaboration between ČKD DUKLA and the then Tatra
Kolín has started more, than 7,000 boiler units in the warm water, hot water or steam design, ranging
from an output of 240 kg/hr. to 240 ton/hr., for incineration of lignite and hard coal, natural gas, town
gas, heavy and light oils, industrial, hospital and municipal wastes have been marketed both in the
country and abroad, including waste heat boilers.
Production according to
the company owned
know-how
Designing
Manufacture according
to the purchaser’s
documentation
Construction
Services
Studies,
Technical
Assistance
Erections
Inspections,
Revisions
Operation of power
equipments
2

BRESSON a. s. Production Range 2002
Production Range
Equipment Designed for Industrial and Heating Boiler
Rooms
Flue fire – tube boilers type BK T98 and BK T2000 are manufactured in both the steam and hot
water designs for combustion of gaseous and liquid fuels as large-room units with natural circulation
and overpressure combustion.
Boilers are completely assembled, incl. their equipment, in the manufacturing plant, while model T2000
is supplied with an economizer solely. Boilers are designed to be connected to device facilitating their
operation without any continuous attendance.
Output range: 1 – 14 ton/hr.; saturated or overheated steam: 220°C (on a individual basis up to
280°); 1.4 MPa (on a individual basis up to 2 MPa); hot water: 150/70°C.
Portable boilers type KTK are manufactured in both the steam and hot water designs for combustion
of gaseous and liquid fuels. They are provided with water conducting tubes, are of a single-drum type
with natural circulation, membrane design, assembled in the manufacturing plant. Boilers are supplied
with the tube water heater and tube air heater, thus reaching an efficiency rate up to 95%.
Output range of steam design: 8 – 25 ton/hr.; steam pressure: 0.9 – 1.4 MPa; steam temperature: 200
– 250°C.
Output range of, hot water design: 5 – 25 MW; pressure: 2.4 MPa; water temperature: 150/70°C.
Portable boilers type OKP are manufactured in both the steam and hot water designs for combustion
of gaseous and liquid fuels. They are provided with water conducting tubes, are of a double-drum type
with natural circulation, membrane design, assembled in the manufacturing plant. Boilers are with
ecomizers to achieve a high efficiency rate.
Output range of steam design: 8 – 40 ton/hr.; steam pressure: 1.4; .2.5; 3.8 MPa; steam temperature:
220; 380; 445°C (if on an individual basis, also with other parameters).
Output range of hot water design: 5.6 – 17.5 MW; pressure: 1.4; 2.5; 3.8 MP; water temperature:
150/70°C (if on an individual basis, also with other parameters).
Supplementary water heaters (economizers) for boilers model BK T98 and OKP (designed with
tubes, fins, made of cast iron).
Stationary boilers - designed with water tubes, membrane type
• Gas boilers up to an output of 150 ton/hr. , or a pressure of up to 9.6 MPa if required
• Oil boilers up to an output of 150 ton/hr. or a pressure of up to 9.6 MPa if required
• Powder boilers with an output of 35 – 150 ton/hr. or a pressure of up to 9.6 MPa if required
• Fluid boilers DUKLAFLUID with an output of 8 – 50 ton/hr. for environmentally friendly combustion
of primarily high-ash fuels
• Fluid boilers IGNIFLUID with an output of 45 – 115 ton/hr. for combustion of hard coal with good
calorific value
3

BRESSON a. s. Production Range 2002
• Grate boilers with a steam output of 4 – 50 ton/hr., in hot water design: 2.8 – 36 MW
• Boilers for incineration of timber, farming and other wastes, and/or their combination with coal
Medium-pressure heat exchangers PMD 10, 35, 70 and 110 are designed for heating and warming
up of HUW [hot utility water] exchangers as a source of the technologic heat. Overpressure combustion of
gaseous and liquid fuels.
Output range: 150 – 1600 kg/hr; designed overpressure: 0.6 and 1.3 MPa.
Hot-air exchangers type OTV are designed to heat air for the purpose of heating, drying or other
technologic applications They are distinguished for their cylindrical design, are made of metal, without
wall lining, with their front wall adjusted for a gas or oil burner.
Output range: 290 – 1740 kW; outgoing adjustable temperature of the heated air within a range of 75 –
150°C.
High-speed steam developers G240 and G500 are through-flow boilers for production of the wet to
saturated steam. Heat-exchanging surface is made by stainless coils, and the boiler is fitted with the
monoblock burner designed for gaseous or liquid fuel.
Steam output: 240 and 500 kg/hr.; designed overpressure: 0.6 MPa.
Steam low-pressure boilers PGP are designed to produce technologic steam, and are applicable also
in the event of low-pressure heating of buildings and TUV heat-exchanger. Overpressure combustion of
gaseous and liquid fuels.
Output range: 250 –2500 kW; designed overpressure: 0.05 MPa.
Hot-water boilers KDVE 16 – 600 are designed for hot-water heating of buildings, production of
technologic heat and warming up TUV heat-exchangers. Overpressure combustion of gaseous and
liquid fuels.
Output range: 160 – 6000 k; designed overpressure: 0.6 MPa; water temperature: 110/70°C.
Thermal oil boilers KDVE - DUB, SPEC are used in case of the heat-conducting medium temperature
more than 110°C and a pressure up to 0.3 MPa, for overpressure combustion of gaseous and liquid
fuels.
The heat-conducting medium (DUBOTERM) is designed for indirect heating in a closed pressure-free
system up to an outlet temperature of 170°C. If required, the boiler type KDVE – DUB Special may be
supplied for an outgoing temperature up to 200°C, and/or more.
Output range: 400 – 1600 kW.
Resistance type electric boilers model EOK 125R, 250 and 400 are used for direct or accumulated
heating by means of electric current in closed hot-water systems.
Output range: 125 – 390 kW.
Boilers EOK 125 R are supplied including electric switchboard and mixing piece. For boilers EOK 250
and 400 electric switchboards may be supplied separately.
Mixing blocks for electric boilers EOK 125R.
4

BRESSON a. s. Production Range 2002
Boilers for exploitation of waste heat
• exploitation of heat from combustion turbines
• exploitation of combustibles from incinerators of municipal and industrial wastes
• exploitation of heat from combustibles of glass works furnaces
• additional surfaces for boilers - water or air heaters
Accessories of boilers designed for solid fuels
• belt and worm feeders or those with shovelling wheels
• cooled worm feeders of glowing ash and ashes
• multiple shaft feeders
• bulk feeders and bulk conveyers
• cooled bulk and worm conveyers
• belt and worm conveyers and their accessories
• steel tanks with vault disruption
• hand-operated and mechanical closures
• overpressure closures
• wet slag removers of various designs – raking, plate, shovel
• hammer mills with separators for milling lignite
• moistening worms
• articulated conveyers
• low-speed bucket lift for ash materials
Accessories of boilers for liquid fuels
• tanks
vertical and heated
horizontal and heated
horizontal for diesel oil
running up type
sedimentation type
• heated and not heated filters Js 40 - 80 - 100 - 150
• oil separators from the heated steam condensate
100 – 1679 cu.m
10 - 25 - 60 cu.m
10 - 25 - 60 cu.m
300 - 1000 l
0.6 - 5 cu.m
Pipes
All the connecting pipes for water, steam, liquid fuels and gas, including distributors, compensators,
supporting structures, suspensions, etc.
For boiler completion:
• air ducts, incl. shock absorbers
• closing and regulating flap valves, rubber connections
• combustible ducts, incl. explosion flap valves, steam compensators, supports and suspensions
5

BRESSON a. s. Production Range 2002
• steel stacks dia. 200 to 2500 mm, single-jacket or double-jacket types, with thermal insulation
Supporting structures
Steel supporting structures, building structures, platforms, transition racks, stairs and ladders
Water treatment plants
Clarifiers DUKLA (water clarification in the fluid flock bed dia. 2000 – 16000)
Output range: 10 – 1000 cu.m/hr.
Lamella separators – clearers (water clarification in the lamella system dia. 3200 - 5400).
Output range: 20 – 240 cu.m/hr.
Double-directional double-layer filters DDFI (double-layer pressure filtering in the double-component
granular bed dia. 1400 - 3000).
Output range: 60 – 280 cu.m/hr.
Ionex filters IFS (for water deionizing, demineralising, dia. 600 – 1400).
Output range: 10 – 60 cu.m/hr.
Ionex filters IFS - D (double-layer “catex” bed for water softening and decarbonizing dia. 600 – 1400).
Output range: 2.6 – 14.5 cu.m/hr.
Ionex filters IF (for water deionizing, demineralising, dia. 1400 - 3000).
Output range: 54 – 270 cu.m/hr.
Ionex filters IFVP (for high flows, water deionizing, demineralizing and acid decarbonizing dia. 630 -
2500).
Output range: 6 – 260 cu.m/hr.
Ionex filters IFDS (for deionizing, demineralizing, with double-flow reconstruction, dia. 1400 - 3000).
Output range: 72 - 375 cu.m/hr.
Ionex counterflow filters PIF (full ionex column for water demineralization, dia. 1000 - 3200).
Output range: 30 - 320 cu.m/hr.
Ionex double-chamber counterflow filters DPIF (two-stage ionex procedure based on full-column
principle, dia. 1000 - 3200).
Output range: 30 - 320 cu.m/hr.
Straining parts for ionex filters (for all sizes and types).
Fine filters JF (fine pressure filtering via. replaceable filtration cartridges dia. 380 - 800).
6

BRESSON a. s. Production Range 2002
Output range: 6 - 30 cu.m/hr.
Rotary drum filters BF (filters in pressure piping, straining elements in the rotary drum, automatic
washing, dia. 100 - 250).
Output range: 100 - 620 cu.m/hr.
Sand filter PF (water filtering in single- or multi-component granular bed dia. 600 - 3000).
Output range: 3.5 - 83 cu.m/hr.
Mixing filters SF (with internal regeneration, final demineralizing stage, dia. 600 - 2500).
Output range: 10 - 234 cu.m/hr.
Mixing filters SFE, SFEK (with external regeneration, final demineralizing stage or condensate
treatment, with an option of pre-filtering in ionex bed, dia. 2000 - 2800).
Output range: 200 - 480 cu.m/hr.
Universal softening filters UZF (for softening or neutral decarbonizing, de-ironing, de-manganeseing,
counterflow regeneration, ionex trap, dia. 600 - 3000).
Output range: 11 - 360 cu.m/hr.
Degassing nozzle (for thermal degassing of the feeding water, maximum overpressure: 0.07 MPa,
maximum temperature: 150°C ).
Output range: 1 - 32 cu.m/hr.
Degassers KS (for thermal degassing of feeder water – two-stage system dia. 400 - 2500).
Output range: 2.2 - 400 cu.m/hr.
Flocculation chamber (pressure chambers with mixing, dia. 500 – 800 and 1800 - 3000).
Output range: 5 – 20 cu.m/hr. and 70 - 350 cu.m/hr.
Level oil collectors (collection of oil substances from the water level based on the indefinite moving
wiped loop principle), with the loop of standard length of 6 meters, electrical input 120 W, water
temperature from 10 – 60°C .
Steam and hot water coolers (to take samples of water and steam), maximum sample overpressure
16 MPa, maximum sample temperature 550°C, maximum temperature of cooled sample 50°C.
Injectors for regeneration solutions (transport and dilution of regeneration solutions for ionex
stations), driving water flow equal to 0.6 ; 1.6 ; 4 ; 8 ; 16 ; 40 cu.m/hr., respectively, DN 25 – 125.
Injectors for loose materials (sand ionex and other fillings to filters and columns), driving water flow
25 cu.m/hr., pressure up to 1 MPa, delivery head up to 8 meters).
Pressure tanks – fans, aerators, expanders, releasers (equalizing tanks dia. 400 – 2500, working
overpressure 0.6 – 1.6 MPa).
Volume: 0.16 – 25 cu.m, and/or as required.
7

BRESSON a. s. Production Range 2002
Accessories - expansion chambers DN 15 – 100.
Diluting salt pressure tanks (for preparation of the regeneration solution while softening, dia. 400 –
1400).
Volume: 90 – 1200 l.
Tanks for external regeneration ER, ERT (for external ionex regeneration in both the not pressure
and pressure designs, dia. 1200 - 2000).
Ionex volume: 1.85 – 12.5 cu.m.
Tanks for chemical solutions (mixers, calibrated vessels, dilution tanks made of steel, and/or
rubberised, dia. 600 - 2500).
Volume: 0.15 - 10 cu.m.
Accessories – tippler of bags for tanks with chemical solutions
Aeration towers (counterflow overpressure aeration units to remove CO 2 from water, dia. 600 - 3000).
Output: 10 - 400 cu.m/hr.
Tanks (steel or rubberised types, both pressure-free and pressure, vertical or horizontal designs, to
store the feed water, condensate, demineralised water, etc., dia. 1000 – 3200, pressure 0.06 ; 0.6; 1
MPa)
Volume: 1 – 120 cu.m.
Safety loops DN 65 - 200
Pressure-free vertical storage tanks SB, SBCH (tanks of non aggressive liquids, with even or
conical head, dia. 1800 - 7620, height 1790 - 7960)
Volume: 4 - 360 cu.m.
Heat exchangers - horizontal capillary exchangers for indirect heat exchange in heating equipments of
water treatment plants, hot-water heating plants for water warming up or its cooling, condensates, etc.
Design: water – water or water – steam, with capillaries made of stainless or brass material.
Heat exchanging surface: 0.8 – 160 sq.m , working overpressure for pipes: 1 – 1.6 MPa and for the
jacket: 0.06 – 1.06 MPa, designed temperature: 115 – 250°C.
Kolín, January 2006
8