TENNANT 7100 SCRUBBER DRYER OPERATOR MANUAL - Clemas
TENNANT 7100 SCRUBBER DRYER OPERATOR MANUAL - Clemas
TENNANT 7100 SCRUBBER DRYER OPERATOR MANUAL - Clemas
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OPERATION<br />
DOUBLE SCRUBBING<br />
Double scrubbing is the process of making two or<br />
more scrubbing passes over a heavily soiled area.<br />
The first scrubbing pass is made with rear<br />
squeegee up to allow the solution to soak into the<br />
floor.<br />
Double scrubbing can be performed using the<br />
FaSTt SCRUBBING SYSTEM (option) or<br />
CONVENTIONAL SCRUBBING methods.<br />
Press the scrub switch to start the normal<br />
scrubbing operations.<br />
Press the rear squeegee switch to raise the rear<br />
squeegee and turn off the vacuum system.<br />
Use the maximum solution flow setting and a<br />
higher brush pressure setting. Let the solution<br />
remain on the floor for 5 to 15 minutes. Decrease<br />
the solution flow, then make a second scrubbing<br />
pass with the rear and side squeegees down.<br />
NOTE: When using the FaSTt system (option),<br />
the solution flow lever is nonfunctional. The<br />
FaSTt system flow rate is pre -set.<br />
FOR SAFETY: When using machine, go<br />
slow on inclines and slippery surfaces.<br />
OPERATION ON INCLINES<br />
Drive the machine slowly on inclines.<br />
FOR SAFETY: When using machine, go<br />
slow on inclines and slippery surfaces.<br />
The maximum rated climb and descent incline with<br />
empty tanks is 11_, with full tanks is 4_.<br />
FOR SAFETY: Before leaving or<br />
servicing machine, stop on level<br />
surface.<br />
<strong>7100</strong> 330699 (3 -04)<br />
31