Segmented Tips

More documents

Recommendations

Info

Reasons you might avoid Segmenting • Projects are not a Saturday afternoon job. • Can’t use found wood (Easily) • Lots of time away from the lathe • Requires a little bit of math and planning • You might need a few more tools (But is that really a problem!) • Disk Sander • Chop Saw • Table Saw
Design Considerations Form Color Grain Alignment Feature Ring design
Page 1 and 2: Stacked Ring Segmented Turning Free
Page 3 and 4: Start with a good book or Video 1.
Page 5: Reasons to try segmented turning
Page 9 and 10: Wood Color Lots of Options - here a
Page 11 and 12: Stress Lines
Page 13 and 14: Designs don’t need to be complex
Page 15 and 16: Make sure all tools are at 90.0
Page 17 and 18: Cut the Segments
Page 19 and 20: A good Sled design Compliments of M
Page 21 and 22: • PVA Glue Start Gluing! What is
Page 23 and 24: Half Rings and Full Rings
Page 25 and 26: Gluing the full ring Make sure each
Page 27 and 28: One way to sand completed rings wit
Page 29 and 30: Finally, Start Turning
Page 31 and 32: The construction form
Page 33 and 34: Sand the Rings
Page 35 and 36: All the rings turned and sanded
Page 37 and 38: Cut the rings in half
Page 39 and 40: Rings arranged in the correct order
Page 41 and 42: Angle jigs
Page 43 and 44: All the rings in place
Page 45 and 46: More clamping
Page 47: After lots of sanding…

Segmented Tips

Create successful ePaper yourself

Delete template?

Save as template?