Touring Jackets & Overpants - Whitehorse Gear

Covell Creative Videos
Ron Covell is one of the finest metalworkers
in the world and, as you’ll see
in these videos, a very effective teacher
as well.The pacing of his videos is just
right—not so fast that you miss the
details, but not so slow to be boring.
He leaves nothing out and takes care to
point out important information about
safety, proper use of tools, sources of
equipment and supplies, and helpful
tips. You’ll want to race from your TV
set and try out what you’ve just learned.
Basic Sheetmetal Techniques (DVD)
This comprehensive video
demonstrates all the basic
hammer-and-dolly sheetmetal
forming techniques: stretching,
shrinking, rough forming,
smoothing, raising depressions,
lowering high spots,
filling small holes, filling large
holes, forming larger panels,
creating a wired edge,
TIG welding, and much more. DVD., NTSC std.,
100 min., color
CBTD $40.00
Shaping Aluminum with Hand Tools (DVD)
Watch every step of making a track roadster
nose, demonstrating techniques suitable for making
virtually any body panel.
He starts with a station buck
defining the shape, shows
clearly how the patterns are
made, then starts shaping each
piece and finally joins them
together. Annealing, mallet
and sandbag rough shaping,
hammer and dolly smoothing,
metal finishing, and both oxy-acetylene and TIG
welding are covered in depth. If you’ve never
seen metal shaped by hand, you may be astounded
how simple the process is! DVD, NTSC std.,
105 min., color
CSAD $40.00
Working with Tubing (DVD)
This video is filled with fantastic
close-up shots, which bring
the action into clear view. Ron
Covell shows dozens of ways to
work with tubing, including
bending with heat, bending
with both inexpensive and
high-end tube bending
machines, mitering, flaring,
and tapering tubing. There is
an extensive section that deals with using U-
bends, showing how to create anything from simple
water pipes to elaborate headers. Most of the
techniques use only simple shop equipment!
DVD, NTSC std., 95 min., color
CWTD $40.00
TIG Welding Basics (DVD)
In this informative and easyto-follow
program, Ron Covell
covers the basic processes used
for TIG welding: proper
machine settings; joint preparation;
electrode selection and
preparation; torch technique;
and perhaps most important,
what to look for when things
go wrong! Covell’s thoughtful
and comprehensive description of the welding
process and close-up photography brings the
details into clear view. DVD, 80 min., color
TIGD $40.00
Triumph English 101:
Tune & Service Video Manual (DVD)
English 101 is a full tune and
service DVD that covers preunit
and unit Triumphs and
unit BSAs. In this interactive
shop manual, watch step-bystep
as Wes White demonstrates
everything you need to
do to keep your British bike
reliable, on the road, and running
great. This 4-hour DVD
is broken down into easy-to-follow chapters and
is designed to teach you how to maintain your
British motorcycle. DVD, 240 min. color
E101D $39.95
Building a Chopper Chassis (DVD)
See a chopper frame built
before your eyes! Covell goes
through the entire process,
starting with an overview of
frame design, explaining the
concepts of rake, trail, and
stretch. He covers the use of
chassis jigs, then goes on to
show how to bend and fit tubing
to create a chopper frame
to match any design. DVD, NTSC std.,
70 min., color
BCCD $40.00
Advanced TIG Welding (DVD)
This program covers many advanced topics in
TIG welding, including welding
chrome moly steel, stainless
steel, aluminum, magnesium,
bronze, copper, and titanium.
You’ll learn how to weld
castings made from aluminum,
magnesium, and
bronze. Clear guidelines are
given for using the pulse and
waveform adjustments that many new welders
have, along with great practical advice on
machine setup, joint preparation, and weld
finishing. DVD, NTSC std., 111 min., color
ATIGD $40.00
Triumph English 102:
Tune & Service Video Manual (DVD)
The electrical system on your
vintage British motorcycle is
covered in depth with a concentration
on identification of
parts, troubleshooting, and
tips to wire your bike from
scratch. More carburetors,
Amal, Mikuni, and JRC units,
are disassembled and discussed.
In depth analysis of
rebuilding hydraulic front ends, clutch center
maintenance and cam bushing reaming is also
included. DVD, NTSC std., color
E102D $39.95
Making Gas Tanks (DVD)
This two-part video takes you
step-by-step through the fabrication
of two motorcycle gas
tanks. In Part 1, Ron Covell
makes a pretty basic symmetrical
tank for a custom
V-Twin. In Part 2, he creates
a very unusual asymmetrical
tank with sweeping curves.
I think even my grandmother
could make a gas tank with Covell’s instruction.
DVD, NTSC std., 166 min., color
MGTD $60.00
MIG Welding (DVD)
MIG Welding is widely used for car and motorcycle
building and modification,
but few people really
understand how each of the
variables affects the finished
weld. This program can be easily
understood by a beginner,
but it covers information even
seasoned professionals can
learn from. See the entire
process step-by-step, with clear descriptions of
how each factor changes the weld, including wire
speed, voltage, wire stickout, gun angle, travel
speed, and gas flow. He also covers plug welds,
patch panels, welding aluminum, and using flux
core wire. DVD, NTSC std., 70 min., color
MIGD $40.00
Service Videos for Pre-Unit and Unit Triumph 650s and Unit BSAs from Wes White of Four Aces Cycles
Triumph 650 Engine Rebuild (DVD)
Wes White provides very clear, step-by-step
instructions for rebuilding Brit
twins of the 50s through 70s.
He shows which tools are used,
how to use them, and offers
tips along the way that will
help save you time and avoid
costly mistakes. If you plan to
rebuild one of these engines,
White’s video will help you do
it properly. Wes White runs a
restoration shop in California that specializes in
Brit twins. DVD, NTSC std., 240 min., color
T650D $39.95
66 MAINTENANCE & TECHNICAL Order Toll-Free 1-800-531-1133