SGS-Katalog 2011

Solid Carbide Tool 

Catalogue 

Edition 3 

www.sgstool.com

Endmills 7 

Endmills 

Drills 61 

Drills 

Burrs 

Burrs 77 

Technical 

Recommendations 

Technical Recommendations 109 

Request Form 

for Special Tools 

Additional Price 

Information 

Request Form for Special Tools 123 

Additional Price Information 126 

£ 

3 

www.sgstool.com

SGS CARBIDE TOOL (UK) LTD - WOKINGHAM 

More than just another Cutting Tool Supplier 

• The worlds largest manufacturer of solid carbide rotary tooling 

• Our focus is on solid carbide rotary cutting tools, and we offer over 

13,000 fractional and metric tools to satisfy practically every cutting application 

• In addition to our end mill and drill manufacturing plants, SGS operates a cuttingedge 

R&D facility, quality control lab and an automated, climate-controlled bur 

manufacturing facility 

• 97 % stock availability from catalogue range in US or UK 

• 2010 introduction of European Stock cell in UK 

• Fast track for specials at SGS UK Rapid Response centre 

• World class patented Solid Carbide products to give you the best in productivity 

• Research & Development for new products, customer projects & continual testing of 

present products 

• Specialising in the supply to industry for Aerospace, Autosport, Nuclear, 

Automotive, Defence, Medical & Foundry’s 

• Our goal is to maximise satisfaction to our customer’s and employees through 

commitment to continuous improvement of quality products & services 

• Unrivalled consistency of product performance & reliability 

• High level of technical support through on-site visits, telephone, training & on-line 

• SGS products are sold in over 60 countries by our extensive and well-supported 

distributor network 

SGS Tool Company World Headquarters 

SGS TOOL COMPANY SGS IN EUROPE 

P.O. Box 187 

SGS France 

55 South Main Street 36, Rue des Landes- B.P . 28 

Munroe Falls, Ohio F-78401 CHATOU Cedex 

44262 U.S.A. 

France 

SGS Tool Europe GmbH 

Hitdorfer Strasse 10 c 

D-40764 Langenfeld 

Germany 

4 

www.sgstool.com

SPECIAL’S SERVICE UK 

STATE OF THE ART MANUFACTURING 

Walter Helitronic CNC grinding 

Special standards from 3mm 

Form tools 

Modifications 

Regrinding 

STATE OF THE ART INSPECTION 

Walter Helicheck 

High definition camera system 

Inspection reports on request 

Accuracy can be checked to +/- 2 microns 

VIRTUAL DESIGN SERVICE 

Complex form tools 

Special geometries 

Selecting the right tool for the material 

SPECIAL PROFILE TOOLS 

DXF files to production 

Specialised geometries 

Advanced coatings 

Through coolant 

ADVANCED COATINGS 

PVD 

• Ti-NAMITE A® (AlTiN) 

• Ti-NAMITE-X® NEW 

• SUPER NITRIDE 

• Ti-NAMITE B® (TiB 2 ) 

• Diamond Like 

Dia-Carb CVD Diamond Coating 

for graphite & composites 

Endmills 

Drills 

Edge wear (inch) 

0,0140 

0,0120 

0,0100 

0,0080 

0,0060 

0,0040 

0,0020 

0,0000 

Inconel 718 

20 HRC 

Ti-NAMITE-X® edge wear 

AlTiN edge wear 


0,0045 

0,0040 

0,0035 

0,0030 

0,0025 

0,0020 

0,0015 

0,0010 

0,0005 

0,0000 

H13 

49 HRC 



Burrs 

Technical 



0,0025 

0,0020 

0,0015 

0,0010 

0,0005 

1018 

150 Bhn 




0,0035 

0,0030 

0,0025 

0,0020 

0,0015 

0,0010 

0,0005 

4140 

28 HRC 



Request Form 



Information 

0,0000 

0,0000 

Cert. No. 949 

5 

www.sgstool.com

Symbols 

Head Shape 

Ball End Corner Radius Square End 

Shank Type [DIN/ISO 6535] 

HA 

HB 

Number of Flutes 

Endmills 

2 

3 

4 

5 

6 

8 

Internal 

Cooling 

JetStream 

Coated 

Uncoated/ 

Coated 

Neck Reach 

Unequal 

Flute Angle 

Point Angle 

Right Hand 

Spiral 

Left Hand 

Spiral 

≥75° 

Endmills 

Endmills 

7 

www.sgstool.com

Endmills 

Endmills 

End 

Mill: 

Material: 

Structural Steel 

Case Hardening 

Steel 

Steel Alloys 

Gray Cast Iron 

Malleable Cast 

Iron 

Tool Steel: 

< 45HRC 

< 50HRC 

Series 

Z-Carb/ AP/ 

JetStream 

Z-Carb 

HTA 

Z-Carb 

MD 

Ser. 61M Ser. 62M Ser. 63M V-Carb Ser. 7M 

Power- 

Carb 

Turbo- 

Carb 

Speed- 

Carb 

Ser. 59 

< 55HRC 

< 60HRC 

> 60HRC 

Stainless Steel 

Titanium Alloys 

High Temp. 

Alloys 

Inconel 

Nickel Alloys 

Aluminium 

Copper 

Plastic 

CFK/GFK 

Wood 

Tri-Carb Ser. 60M 

Series 

S-Carb / 

APR / APF 

Ski-Carb 

Shear- 

Carb 

Ser. 21M Ser. 22M 20MCCR FGR 

Application: applicable optimal Application: applicable optimal Application: applicable optimal 

8 

Roughing 

Standard 

machining 

Finishing 

www.sgstool.com

Endmills 

Test Reports 11 

Product 

Group 

Endmills Number of Teeth Page 

Material 

Group 

3 Z-Carb-AP – High Feed Machining for Maximum Metal Removal 4 13 

3 Z-Carb-AP Long Reach - Patented Variable Rake Endmills 4 14 

3 Z-Carb – High Feed Machining for Maximum Metal Removal 4 15 

3 Z-Carb-AP / Z-Carb JetStream 4 17 

3 

3 

Z-Carb-MD – 

High Feed Machining for Max Metal Removal on Tool Steel 

Z-Carb-HTA – 

For High Feed Machining for Max Metal Removal on Aerospace Materials 

4 18 

4 19 

1 Ripper Endmills – Series 61M / 62M / 63M 3 - 6 21 

3 V-Carb – For High Feed Semi-finishing/Finishing 5 22 

3 Series 7M – High Performance Endmills 4 24 

3 

3 

Power-Carb – 

Endmills for High Efficiency Machining of Hardened Tool Steels - Series 57M 

Turbo-Carb® – 

For 3D Profile/Contouring of Hardened Tool Steel – Series 56MB 

6 / 8 25 

2 25 

1 Series 59M/59MB - Long Length, Short Flute Endmills and Ball Nose 2 26 

3 

3 

1 

Speed-Carb® – 

Torus Endmills for High Feed Machining with small depth of cut 

Tri-Carb® – 

For Profiling & Slotting of Exotic Materials – Series 65M 

Series 60M – 

For Semi-Finishing & Finishing of Exotic Materials 

2 27 

3 28 

3 29 

3 S-Carb – High Efficiency Machining of Aluminium Alloys 3 / 2 30 

Endmills 

3 S-Carb APR / APF– High Efficiency Machining of Aluminium Alloys 3 / 4 32 

3 Ski-Carb® – High-Speed Machining of Aluminium Alloys > 20,000 RPM 2 34 

1 

1 

Shear-Carb – Conventional Profiling of Aluminium Alloys – 

Series 52M / Series 54M 

21M/22M – 

Wood, Plastic & Non Ferrous Router & RH Cutting & LH Helix 

2 / 4 35 

2 36 

1 20M-CCR – Multi-Flute Carbon-Fibre Composite Routers 37 

1 FGR – Fibreglass Routers 38 

1 Series 1M – 4 Flute Endmills 4 39 

1 DIN 6528 – 4 Flute Endmills DIN Standard 4 42 

1 Series 1XLM – 4 Flute Extra Long Series 4 43 

1 Series 16M – 4 Flute Short Length 4 45 

1 Series 14M – 4 Flute Double Ended 4 46 

1 Series 5M – 3 Flute 3 48 


1 Series 3M – 2 Flute 2 52 


1 Series 17M – 2 Flute Short Length 2 56 

1 Series 15M – 2 Flute Double Ended 2 57 

1 MK2M – 2 Flute Micro Range 2 59 

9 

www.sgstool.com

Endmills 

10 

www.sgstool.com

Test Reports 

Z-CARB 

Cutter Description Competitor H Z-CARB 10mm, 46337 

Material 

Titanium 

TiAl6V4 

Titanium 

TiAl6V4 

Rpm 1900min -1 2500min -1 

Speed 60m/min 80m/min 

Feed 280mm/min 400mm/min 

Radial Cut 3mm 3mm 

Axial Cut 12mm 12mm 

Comments 

Improved Tool Life 

& Surface Finish 

£1.25 £0.57 

Cost Savings per Component 

-54% 

Annual Saving 

of £6500 using 

Z-CARB 

Z-CARB HTA 

Cutter Description Competitor H Z-CARB HTA 20mm, 46469 

Material Inconel 718 Inconel 718 

Rpm 300min -1 480min -1 





Comments 

75 % Improved Tool life 

£185 £128 


-30% 

Saving of £3200/Batch 

using Z-CARB HTA 

Endmills 

V-CARB 

Cutter Description Competitor M V-CARB 16mm, 42618 

Material Monel 400 Monel 400 

Rpm 400min -1 1000min -1 



Radial Cut 0.4mm 0.3mm 


Comments 

Improved Tool Life 

& Surface Finish 

£22 £14 


-36% 

Annual Saving 


V-CARB 

S-CARB 

Cutter Description Competitor D S-CARB 12mm, 44708 

Material Aluminium (6061) Aluminium (6061) 

Rpm 5500min -1 8500min -1 





Comments 

100 % Improved Tool Life 

£3 £0.75 


-75% 

Annual Saving 


S-CARB 

11 

www.sgstool.com

Endmills 

Z-Carb-AP 

Superior Chatter Suppression 

Recorder Sound Amplitude 

0,10 

0,09 

0,08 

0,07 

0,06 

0,05 

0,04 

0,03 

0,02 

0,01 

0,00 

Z-Carb-AP Competitor F Competitor V Competitor N 

68 % 

More Sound 

Produced vs. 

Z-Carb-AP 

75 % 

More Sound 

Produced vs. 

Z-Carb-AP 

10 % 

More Sound 

Produced vs. 

Z-Carb-AP 

Endmills 

Tool Life Comparison 

12.700 

Tool Life (mm) 

6.350 

43 % Additional Wear over Z-Carb-AP 

70 % Additional Wear over Z-Carb-AP 

Tool Failed 

After 6.350 mm 

• 304 Stainless Steel @ 140 BHN 

• 12 mm Cutting Diameter 

• 100 % Axial Depth of Cut and 25 % Radial Width of Cut 

• Speed = 3.056 min -1 

• Feed = 698,5 mm/min 

• 8 % Water Soluble Flood Coolant 

1.270 

0,000 0,005 0,010 0,015 0,020 0,025 0,030 0,035 0,040 0,045 

Z-Carb-AP 

Competitor F 

Competitor N 

Competitor H 

Recorded Tool Wear (mm) 

Reduced Vibration Means Improved Surface Finish 

25 

20 

15 

20,28 Ra 

• 4140 Steel @ 30 HRc 

• 12 mm Cutting Diameter 

• 100 % Axial and Radial Cut 

• Slotting with a 90° Turn 

• Feed = 457,2 mm/min 

10 

5 

6,32 Ra 

9,07 Ra 

7,34 Ra 

• Speed = 2.675 min -1 

• Dry Machining with Air Blast 

0 

Z-Carb-AP Competitor F Competitor D Competitor H 

321 % 

Rougher Average 

Surface Finish 

than 

Z-Carb-AP 

44 % 



than 

Z-Carb-AP 

16 % 



than 

Z-Carb-AP 

12 

www.sgstool.com

Endmills 

Z-Carb-AP 

Patented Variable Rake Endmills 

Tolerances: 

Ø d 1 d 2 

3-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-25 +0/-0,05 h 6 

Radius Tolerance: +0/ -0,05 

35°/ 38° 

≥90° 

Endmills 

Z-Carb-AP Long Reach 

Patented Variable Rake Endmills 

Tolerances: 

35°/ 38° 

≥90° 

6-10 +0/-0,04 h 6 

> 10-25 +0/-0,05 h 6 


Technical 

Recommendations: 

Corner Radius - Series Z1MPLC 

112 

Endmills 

d 1 d 2 l 1 l 2 l 3 Corner Radius 

mm mm mm mm mm mm 

6 6 75 8 24 0,50 

8 8 75 10 32 1,00 

8 8 75 10 32 2,00 

10 10 100 12 40 1,00 

10 10 100 12 40 2,00 

12 12 100 15 48 1,00 

12 12 100 15 48 1,50 

12 12 100 15 48 2,00 

12 12 100 15 48 3,00 

16 16 115 20 65 1,00 

16 16 115 20 65 1,50 

16 16 115 20 65 2,00 

16 16 115 20 65 3,00 

16 16 115 20 65 4,00 

16 16 115 20 65 5,00 

20 20 140 24 80 1,00 

20 20 140 24 80 1,50 

20 20 140 24 80 2,00 

20 20 140 24 80 3,00 

20 20 140 24 80 4,00 

20 20 140 24 80 5,00 

Ti-NAMITE-X® 

without Weldon 

46821 

46822 

46823 

46824 

46825 

46826 

46827 

46828 

46829 

46830 

46831 

46832 

46833 

46834 

46835 

46836 

46837 

46838 

46839 

46840 

46841 

Ti-NAMITE-X® 

with Weldon 

46928 

46929 

46930 

46931 

46932 

46933 

46934 

46935 

46936 

46937 

46938 

46939 

46940 

46941 

46942 

46943 

Weldon Shank 3-5 Days delivery 

Weldon position will ensure l 3 + small clearance will protrude from front face 

of sidelock 

14 

www.sgstool.com 

Product Group 3

Endmills 

Z-Carb 

High Feed Machining for Maximum Metal Removal 

≥90° 

6-10 +0/-0,04 h 6 

> 10-25 +0/-0,05 h 6 

All Radius dimensions ±0,1mm 

Technical 


Corner Radius - Series Z1MCR 

d 1 d 2 l 1 l 2 Corner Radius 

mm mm mm mm mm 

3 6 57 8 0,30 

4 6 57 11 0,30 

5 6 57 13 0,30 

6 6 57 13 0,50 

8 8 63 19 0,50 

10 10 72 22 0,50 

12 12 83 26 0,75 

14 14 83 26 0,75 

16 16 92 32 1,00 

18 18 92 32 1,00 

20 20 104 38 1,00 

25 25 104 38 1,00 

Ti-NAMITE-A® 

EDP No. 

46377 

46378 

46379 

46335 

46336 

46337 

46338 

46339 

46340 

46341 

46342 

46334 

113 

Endmills 

Note – for Radius modification please prefix EDP No. With R (radius size) eg. 16mm Z-Carb with 2mm Rad would be R2.0-46340 

Product Group 3 

15 

www.sgstool.com

Endmills 

Z-Carb 

High Feed Machining for Maximum Metal Removal 

d1 

l 1 

d2 

l 

2 

≥90° 

6-10 +0/-0,04 h 6 

> 10-25 +0/-0,05 h 6 

Technical 


113 

Square End - Series Z1M 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 57 8 

4 6 57 11 

5 6 57 13 

6 6 57 13 

8 8 63 19 

10 10 72 22 

12 12 83 26 

14 14 83 26 

16 16 92 32 

18 18 92 32 

20 20 104 38 

25 25 104 38 

Ti-NAMITE-A® 

EDP No. 

46357 

46358 

46359 

46360 

46362 

46364 

46366 

46368 

46370 

46372 

46374 

46376 

16 


Product Group 3

Endmills 

Z-Carb-AP / Z-Carb Jet-Stream 

With Coolant Channels 

l 

1 

Corner 

Radius 

l 

2 

Tolerances: 

d1 

d2 

≥90° 

6-10 +0/-0,04 h 6 

> 10-25 +0/-0,05 h 6 

All Radius dimensions +0/ -0,05 

Technical 


Corner Radius - Z-Carb-AP/Z-Carb JetStream - Series Z1MPCR 



12 12 83 26 0,75 

12 12 83 26 3,00 

14 14 83 26 1,00 

16 16 92 32 1,00 

16 16 92 32 3,00 

20 20 104 38 1,00 

20 20 104 38 3,00 

25 25 104 38 1,00 

Ti-NAMITE-A® 

EDP No. 

46493 

42719 

46494 

46495 

42721 

46497 

42723 

46498 

111/113 

Endmills 

Square End - Z-Carb JetStream - Series Z1M 

d 1 d 2 l 1 l 2 

mm mm mm mm 

14 14 83 26 

16 16 92 32 

18 18 92 32 

20 20 104 38 

25 25 104 38 

Ti-NAMITE-A® 

EDP No. 

46506 

46507 

46508 

46509 

46510 

Ball End - Z-Carb JetStream - Series Z1MB 

d 1 d 2 l 1 l 2 

mm mm mm mm 

14 14 83 26 

16 16 92 32 

18 18 92 32 

20 20 104 38 

25 25 104 38 

Ti-NAMITE-A® 

EDP No. 

46518 

46519 

46520 

46521 

46522 

17 


www.sgstool.com

Endmills 

Z-Carb MD 

High Feed Machining for Max Metal Removal on Tool Steel 

l 

1 

Corner 

Radius 

l 2 

l 

3 

Tolerances: 

d 1 

42°/ 45° 

≥90° 

6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 


Technical 


Endmills 

Corner Radius - Series ZD1MCR 



3 6 57 4 15 0,20 

4 6 57 5 15 0,30 

5 6 57 6 15 0,50 

6 6 57 7 15 1,00 

8 8 63 10 25 1,00 

10 10 72 12 30 1,00 

12 12 83 15 35 1,00 

16 16 92 20 45 1,50 

20 20 104 24 55 2,00 

Ti-NAMITE-A® without Flat 

EDP No. 

46560 

46561 

46562 

46563 

46564 

46565 

46566 

46567 

46568 

Ti-NAMITE-A® with Flat 

EDP No. 

46569 

46570 

46571 

46572 

114 

18 


Product Group 3

Endmills 

Z-Carb HTA 


Tolerances: 

38°/ 41° 

≥90° 

6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 


Technical 


Corner Radius - Series ZH1MCR 



6 6 57 13 0,50 

6 6 57 13 1,00 

6 6 57 13 1,50 

8 8 63 19 0,50 

8 8 63 19 1,00 

8 8 63 19 1,50 

10 10 72 22 0,50 

10 10 72 22 1,00 

10 10 72 22 1,50 

10 10 72 22 2,00 

12 12 83 26 0,50 

12 12 83 26 1,00 

12 12 83 26 1,50 

12 12 83 26 2,00 

12 12 83 26 3,00 

16 16 92 32 1,50 

16 16 92 32 2,00 

16 16 92 32 3,00 

16 16 92 32 4,00 

20 20 104 38 3,00 

20 20 104 38 4,00 

20 20 104 38 5,00 

Ti-NAMITE-A® without Flat 

EDP No. 

46450 

46451 

46452 

46453 

46454 

46455 

46456 

46457 

46458 

46459 

46460 

46461 

46462 

46463 

46464 

46465 

46466 

46467 

46482 

46468 

46469 

46470 

Ti-NAMITE-A® with Flat 

EDP No. 

46471 

46472 

46473 

46474 

46475 

46476 

46477 

46478 

46483 

46479 

46480 

46481 

114 

Endmills 

19 


www.sgstool.com

Endmills 

Z-Carb HTA TM Stub 


l 

1 

Corner 

Radius 

l 2 

Tolerances: 

d 1 

≥90° 

6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 


Technical 


Corner Radius - Series ZH1MCR 



6 6 54 10 0,50 

8 8 58 12 0,50 

10 10 66 14 0,50 

12 12 73 16 0,75 

16 16 82 22 1,00 

20 20 92 26 1,00 

Ti-NAMITE-A® 

EDP No. 

42712 

42713 

42714 

42715 

42716 

42717 

113 

Endmills 

20 


Product Group 3

Endmills 

Ripper Endmills 

l 1 

Tolerances: 

l 2 

115 

d 1 

d 2 

d 1 d 2 

+0,000/-0,1 h 6 

Technical 


30°- 40° 3 4 5 6 

HB 

Series 61M 

Structural Steel and Gray Cast Iron 

d 1 d 2 l 1 l 2 Number of Corner Radius 

mm mm mm mm Teeth 

mm 

6 6 63 19 3 1,15 

8 8 63 19 3 1,15 

10 10 72 22 3 1,50 

12 12 83 26 4 1,50 

16 16 92 32 4 1,50 

20 20 104 38 4 1,50 

25 25 104 44 5 1,50 

Ti-NAMITE-A® 

EDP No. 

46110 

46111 

46114 

46118 

46122 

46132 

46133 

Endmills 

Series 62M 

Steel Alloys 


mm mm mm mm Teeth mm 

6 6 63 19 3 1,15 

8 8 63 19 3 1,15 

10 10 72 22 3 1,50 

12 12 83 26 4 1,50 

16 16 92 32 4 1,50 

20 20 104 38 4 1,50 

25 25 104 44 6 1,50 

Ti-NAMITE-A® 

EDP No. 

46210 

46211 

46214 

46218 

46222 

46232 

46233 

Series 63M 

Nonferrous Materials 


mm mm mm mm Teeth mm 

6 6 63 19 3 1,15 

8 8 63 19 3 1,15 

10 10 72 22 3 1,50 

12 12 83 26 3 1,50 

16 16 92 32 3 1,50 

20 20 104 38 3 1,50 

25 25 104 44 3 1,50 

Ti-NAMITE-A® 

EDP No. 

46310 

46311 

46314 

46318 

46322 

46332 

46333 


21 

www.sgstool.com

Endmills 

V-Carb TM 

For High Feed Semi-fi nishing/Finishing 

l 

1 

Corner 

Radius 

l 2 

Tolerances: 

d1 

d 2 

Ø d 1 d 2 

6-20 +0/-0,05 h 6 

≥75° 

Endmills 

V-Carb TM 

For High Feed Semi-fi nishing/Finishing 

Corner Radius - Series 55MCR / Square End - Series 55M 



16 16 89 32 1,00 

16 16 89 32 1,50 

16 16 89 32 2,00 

16 16 89 32 2,50 

16 16 89 32 3,00 

16 16 89 32 4,00 

16 16 150 75 1,00 

16 16 150 75 3,00 

16 16 150 75 4,00 

20 20 100 38 1,00 

20 20 100 38 1,50 

20 20 100 38 2,00 

20 20 100 38 2,50 

20 20 100 38 3,00 

20 20 100 38 4,00 

20 20 100 38 5,00 

20 20 150 75 1,00 

20 20 150 75 2,00 

20 20 150 75 3,00 

20 20 150 75 4,00 

20 20 150 75 5,00 

Ti-NAMITE-A® Corner Radius 

EDP No. 

42687 * 

42688 * 

42689 * 

42690 * 

42691 * 

42692 * 

42693 * 

42632 * 

42633 * 

42694 * 

42695 * 

42696 * 

42697 * 

42698 * 

42699 * 

42700 * 

42701 * 

42702 * 

42703 * 

42704 * 

42705 * 

Ti-NAMITE-A® Square End 

EDP No. 

42618 

42619 

42620 

42621 

Endmills 


* 7-10 working days delivery 

23 

www.sgstool.com

Endmills 

Series 7M - Square End / Series 7MB - Ball End 

l 1 

l 2 

d d 

1 

2 

≥90° 

Endmills 

Power-Carb 

End mill for High Effi ciency Machining of Hardened Tool steels – Series 57M 

l 

1 

l 

2 

d 1 

d 2 

45° 6 8 

HA 

> 45 HRC 

Ø d 1 d 2 

3-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 

Technical 


116 

d 1 d 2 l 1 l 2 z 

mm mm mm mm 

6 6 89 13 6 

8 8 102 18 6 

10 10 102 22 6 

12 12 114 26 6 

16 16 140 32 8 

20 20 165 38 8 

Ti-NAMITE-A® 

EDP No. 

46140 

46141 

46142 

46143 

46145 

46147 

Endmills 

Turbo-Carb® 

For 3D Profi le/Contouring of Hardened Tool Steel – Series 56MB 

l 

l 

2 3 

l 

1 

Tolerances: 

d 

1 

β 

d 2 

Ø d 1 d 2 

1-2,5 +0/-0,025 h 6 

>2,5-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 

30° 

2 

HA 

< 62 HRC 

Technical 


d 1 d 2 l 1 l 2 l 3 β 


1 6 76 1 1 8 

1,5 6 76 1,5 1,5 8 

2 6 76 2 2 8 

2,5 6 76 2,5 2,5 8 

3 6 76 3 3 8 

4 6 76 4 4 8 

5 6 89 5 5 8 

6 6 89 6 6 - 

8 8 102 8 8 - 

10 10 102 10 10 - 

12 12 114 12 12 - 

16 16 140 16 16 - 

20 20 165 20 20 - 

Ti-NAMITE-A® 

EDP No. 

91349 

91350 

91351 

91352 

91353 

91354 

91355 

91356 

91357 

91358 

91359 

91360 

91361 

117 

25 


www.sgstool.com

d 1 d 2 

Endmills 

Series 59MB – Ball End / Series 59M – Square End 

Long Length Short Flute Ball End – Series 59M / Series 59MB 

Tolerances: 

d 1 

l 2 

l 1 

d 2 

Ø d 1 d 2 

3-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 

Technical 


25° 2 

HA 

Series 59MB – Ball End 

121 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 60 9 

4 6 70 12 

6 6 80 15 

8 8 90 20 

10 10 100 25 

12 12 110 30 

14 16 120 35 

16 16 120 40 

18 20 130 40 

20 20 130 45 

Uncoated 

EDP No. 

43900 

43901 

43902 

43903 

43904 

43905 

43906 

43907 

43908 

43909 

Ti-NAMITE-A® 

EDP No. 

49642 

49643 

49644 

49645 

49646 

49647 

49648 

49649 

49650 

49651 

Series 59M – Square End 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 60 9 

4 6 70 12 

6 6 80 15 

8 8 90 20 

10 10 100 25 

12 12 110 30 

14 16 120 35 

16 16 120 40 

18 20 130 40 

20 20 130 45 

Uncoated 

EDP No. 

43910 

43911 

43912 

43913 

43914 

43915 

43916 

43917 

43918 

43919 

Ti-NAMITE-A® 

EDP No. 

43950 

43951 

43952 

43953 

43954 

43955 

43956 

43957 

43958 

43959 

26 


Product Group 1

Endmills 

Speed-Carb ® 

Torus End Mill for High Feed Machining with small depth of cut 

Corner 

Radius 

Tolerances: 

Ø d 1 d 2 

3-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 

Technical 


30° 2 HA 

< 62 HRC 

117 



3 6 60 3 9 1,00 

4 6 60 4 12 1,00 

4 6 60 4 12 1,50 

5 6 70 5 15 1,00 

5 6 70 5 15 2,00 

6 6 75 6 18 1,00 

6 6 75 6 18 2,00 

8 8 75 8 24 1,00 

8 8 75 8 24 3,00 

10 10 80 10 30 1,00 

10 10 80 10 30 3,00 

12 12 100 12 36 1,00 

12 12 100 12 36 3,00 

Ti-NAMITE-A® 

EDP No. 

46160 

46161 

46162 

46163 

46164 

46165 

46166 

46167 

46168 

46169 

46170 

46171 

46172 

Endmills 


27 

www.sgstool.com

Endmills 

Tri-Carb® 

For Profi ling & Slotting of Exotic Materials – Series 65M 

Corner 

Radius 

l 2 

l 

1 

Tolerances: 

d 1 

35° 3 

HA 

d 2 

Ø d 1 d 2 

3-6 +0/-0,03 h 6 

> 6-10 +0/-0,04 h 6 

> 10-20 +0/-0,05 h 6 


Technical 


Endmills 



3 3 38 6 0,10 

4 4 50 8 0,10 

5 6 50 8 0,20 

6 6 63 9 0,20 

8 8 63 11 0,20 

10 10 63 13 0,30 

12 12 75 15 0,40 

16 16 89 19 0,50 

20 20 100 26 0,60 

Ti-NAMITE-A® 

EDP No. 

91300 

91301 

91302 

91303 

91304 

91305 

91306 

91307 

91308 

118 

28 


Product Group 3

Endmills 

Series 60M – Square End 

For Semi-Finishing & Finishing of Exotic Materials 

l 1 

Tolerances: 

d 1 

l 2 

d 2 

60° 3 

HB 

Ø d 1 d 2 

3-6 +0/-0,048 h 6 

> 6-10 +0/-0,058 h 6 

> 10-18 +0/-0,070 h 6 

> 18-20 +0/-0,084 h 6 

Technical 


d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 57 8 

4 6 57 11 

5 6 57 13 

6 6 57 13 

8 10 69 19 

10 10 72 22 

12 12 83 26 

16 16 92 32 

20 20 104 38 

Ti-NAMITE-A® 

EDP No. 

43960 

43961 

43962 

43963 

43964 

43965 

43966 

43967 

43968 

118 

Endmills 

29 


www.sgstool.com

Endmills 

S-Carb TM – High Efficiency Machining of Aluminium Alloys 

l 

1 

l 3 

Corner 

Radius 

l 

2 

Tolerances: 

d 1 

d 2 

Ø d 1 d 2 

6-25 -0,0025/-0,01 h 6 

Technical 


38° 

3 

HA 

118/119 

Square End - Series 43M / Corner Radius - Series 43MCR 

Endmills 



6 6 57 13 

6 6 57 13 1,50 

6 6 72 13 

6 6 75 10 20 

6 6 63 10 20 0,50 

6 6 63 10 20 1,00 

6 6 72 13 30 0,50 

6 6 72 13 30 1,00 

8 8 63 19 

8 8 75 12 25 

8 8 75 12 25 0,30 

8 8 75 12 25 0,50 

8 8 75 12 25 1,00 

8 8 75 12 25 1,50 

10 10 72 22 

10 10 100 14 35 

10 10 100 14 35 0,30 

10 10 100 14 35 0,50 

10 10 100 14 35 1,00 

10 10 100 14 35 1,50 

12 12 83 26 

12 12 83 26 1,50 

12 12 83 26 3,00 

12 12 100 16 40 

12 12 100 16 40 0,50 

12 12 100 16 40 1,00 

12 12 100 16 40 1,50 

12 12 100 16 40 2,00 

12 12 100 16 40 3,00 

12 12 100 16 40 4,00 

16 16 92 32 

16 16 92 32 1,50 

16 16 92 32 3,00 

16 16 125 20 50 

16 16 125 20 50 2,00 

16 16 125 20 50 3,00 

16 16 125 20 50 4,00 

20 20 104 38 

20 20 104 38 3,00 

20 20 150 25 65 

20 20 150 25 65 2,00 

20 20 150 25 65 3,00 

20 20 150 25 65 4,00 

25 25 125 50 

Uncoated 

EDP No. 

44701 

44702 

44769 

44770 

44771 

44772 

44703 

44773 

44774 

44775 

44776 

44705 

44777 

44778 

44779 

44780 

44708 

44781 

44782 

44783 

44784 

44711 

44785 

44786 

44714 

44787 

44788 

Ti-NAMITE-B® 

EDP No. 

44715 

44732 

44716 

42706 

44789 

44790 

44791 

44792 

44717 

42707 

44793 

44794 

44795 

44796 

44719 

42708 

44797 

44798 

44799 

44800 

44722 

44733 

44734 

42709 

44801 

44802 

44803 

44804 

44738 

44741 

44725 

44735 

44736 

42710 

44805 

44739 

44806 

44728 

44737 

42711 

44807 

44740 

44808 

44731 

30 

www.sgstool.com Product Group 1

Endmills 

S-Carb TM – High Efficiency Machining of Aluminium Alloys 

l 

1 

l 3 

l 

2 

d 1 d 2 

Tolerances: 

Ø d 1 d 2 

3-25 h 6 h 6 

Technical 


35° 

2 

HA 

118/119 

Square End - Series 47M / 47MES 

d 1 d 2 l 1 l 2 l 3 


3 3 38 8 

4 4 50 11 

5 5 50 13 

6 6 57 13 

6 6 100 10 54 

8 8 63 19 

8 8 100 12 54 

10 10 72 22 

10 10 100 12 54 

12 12 83 26 

12 12 150 16 80 

14 14 83 26 

16 16 92 32 

16 16 150 20 80 

20 20 104 38 

20 20 150 25 80 

25 25 104 44 

Square End 

EDP No. 

44550 

44551 

44552 

44553 

44561 

44554 

44562 

44555 

44563 

44556 

44564 

44557 

44558 

44565 

44559 

44566 

44560 

Ti-NAMITE-B® 

EDP No. 

44587 

44588 

44589 

44590 

44609 

44591 

44610 

44592 

44611 

44593 

44612 

44594 

44595 

44613 

44596 

44614 

44597 

Endmills 

Tolerances: 

Ball End - Series 47MB / 47MEB 

Ø d 1 d 2 

3-25 h 6 h 6 

d 1 d 2 l 1 l 2 l 3 


3 3 38 8 

4 4 50 11 

5 5 50 13 

6 6 57 13 

6 6 100 10 54 

8 8 63 19 

8 8 100 12 54 

10 10 72 22 

10 10 100 12 54 

12 12 83 26 

12 12 150 16 80 

14 14 83 26 

16 16 92 32 

16 16 150 20 80 

20 20 104 38 

20 20 150 25 80 

25 25 104 44 

Ball End 

EDP No. 

44570 

44571 

44572 

44573 

44581 

44574 

44582 

44575 

44583 

44576 

44584 

44577 

44578 

44585 

44579 

44586 

44580 

Ti-NAMITE-B® 

EDP No. 

44598 

44599 

44600 

44601 

44615 

44602 

44616 

44603 

44617 

44604 

44618 

44605 

44606 

44619 

44607 

44620 

44608 

31 


www.sgstool.com

Endmills 

S-Carb APR - High Efficiency Machining of Aluminium Alloys 

Endmills For Maximum Metal Removal Rates 

Corner 

Radius 

Tolerances: 

Ø d 1 d 2 

12-25 +0/-0,050 h 6 

Technical 


38° 3 

3 

HA 

119 

Endmills 



12 12 83 18 38 

12 12 83 18 38 2,00 

12 12 83 18 38 3,00 

12 12 83 18 38 4,00 

16 16 92 24 51 

16 16 92 24 51 2,00 

16 16 92 24 51 3,00 

16 16 92 24 51 4,00 

20 20 104 35 64 

20 20 104 35 64 3,00 

20 20 104 35 64 4,00 

20 20 104 35 64 5,00 

25 25 130 43 80 

25 25 130 43 80 3,00 

25 25 130 43 80 4,00 

25 25 130 43 80 5,00 

Available on Request 

Ti-NAMITE B Coating 

Available with and without Jetstream 

Price based without Jetstream 

Uncoated 

EDP No. 

44650 

44685 

44686 

44687 

44652 

44688 

44689 

44690 

44653 

44691 

44692 

44693 

44654 

44694 

44695 

44696 

32 


Product Group 3

Endmills 

S-Carb APF - High Efficiency Machining of Aluminium Alloys 

Endmills For Optimal Finishing Results On Thin-Walled Work Pieces 

Corner 

Radius 

Tolerances: 

≥90° 

Endmills 

Ski-Carb TM - High-Speed Machining of Aluminium Alloys > 20,000 RPM 

l 

1 

l 

2 

Tolerances: 

Endmills 

d 1 

45° 

Square End - Series 44M 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 52 8 

4 6 55 11 

5 6 57 13 

6 6 57 13 

8 10 69 19 

10 10 72 22 

12 12 83 26 

14 14 83 26 

16 16 92 32 

18 18 92 32 

20 20 104 38 

2 

HA 

Uncoated 

EDP No. 

49663 

49664 

49665 

49666 

49667 

49668 

49669 

49670 

49671 

49672 

49673 

d 2 

Ti-NAMITE-B® 

EDP No. 

49674 

49675 

49676 

49677 

49678 

49679 

49680 

49681 

49682 

49683 

49684 

Ø d 1 d 2 

3 +0/-0,006 h 6 

> 3-6 +0/-0,008 h 6 

> 6-10 +0/-0,009 h 6 

> 10-18 +0/-0,011 h 6 

> 18-20 +0/-0,013 h 6 


Technical 


120 

l 

2 

l 

1 

d 1 

d2 

45° 

2 

HB 

Square End + Weldon - Series 44M 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 52 8 

4 6 55 11 

5 6 57 13 

6 6 57 13 

8 10 69 19 

10 10 72 22 

12 12 83 26 

14 14 83 26 

16 16 92 32 

18 18 92 32 

20 20 104 38 

Uncoated 

EDP No. 

44505 

44509 

44513 

44517 

44521 

44525 

44529 

44533 

44537 

44541 

44545 

Ti-NAMITE-B® 

EDP No. 

44506 

44510 

44514 

44518 

44522 

44526 

44530 

44534 

44538 

44542 

44546 

34 


Endmills 

Shear-Carb - Conventional Slotting of Aluminium Alloys - Series 52M 

d 1 

d 2 

Ø d 1 d 2 

3-6 +0/-0,048 h 6 

Solid Carbide End Mills for Aluminum 

l 1 

l 2 

Tolerances: 

d 1 

d 2 

Ø d 1 d 2 

3-6 +0/-0,048 h 6 

> 6-10 +0/-0,058 h 6 

> 10-18 +0/-0,070 h 6 

> 18-20 +0/-0,084 h 6 

Technical 


30° 

2 

HA 

120 

d 1 d 2 l 1 l 2 

Uncoated 

mm mm mm mm 

EDP No. 

3 3 38 7 

45277 

3,5 6 57 7 

45279 

4 6 57 8 

45281 

4,5 6 57 8 

45283 

5 6 57 10 

45285 

6 6 57 10 

45287 

8 8 63 16 

45289 

10 10 72 19 

45291 

12 12 83 22 

45293 

14 14 83 22 

45295 

16 16 92 26 

45297 

20 20 104 32 

45299 

l 1 

l 2 

Tolerances: 

> 6-10 +0/-0,058 h 6 

> 10-18 +0/-0,070 h 6 

> 18-20 +0/-0,084 h 6 

Shear-Carb - Conventional Profiling of Aluminium Alloys – Series 54M 

30° 

4 

HA 

Technical 


® 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 38 8 

3,5 6 57 10 

4 6 57 11 

4,5 6 57 11 

5 6 57 13 

6 6 57 13 

8 8 63 19 

10 10 72 22 

12 12 83 26 

14 14 83 26 

16 16 92 32 

20 20 104 38 

Uncoated 

EDP No. 

45477 

45479 

45481 

45483 

45485 

45487 

45489 

45491 

45493 

45495 

45497 

45499 

120 

35 


www.sgstool.com

Endmills 

Series 21M 

Wood, Plastic & Non Ferrous Router Series 21M 

l 1 

l 2 

d 1 d 2 

Tolerances: 

Ø d 1 d 2 

3-12 +0/-0,08 h 6 

Technical 


35° 2 HA 

120 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 50 12,7 

4 6 63 16 

5 6 63 19 

6 6 63 25 

8 8 63 25 

10 10 75 31 

12 12 75 31 

Uncoated 

EDP No. 

90101 

90107 

90109 

90113 

90121 

90129 

90137 

Series 22M 

Wood, Plastic & Non Ferrous Router RH Cutting & LH Helix 

l 1 

l 2 

Tolerances 

d 1 d 2 

120 

Ø d 1 d 2 

3-12 +0/-0,08 h 6 

Technical 

Recommedations: 

35° 

2 HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 6 50 12,7 

4 6 63 16 

5 6 63 19 

6 6 63 25 

8 8 63 25 

10 10 75 31 

12 12 75 31 

Uncoated 

EDP No. 

91101 

91107 

91109 

91113 

91121 

91129 

91137 

36 


Endmills 

d 1 d 2 +0/-0,1 h6 

l 2 

Tolerances: 

l 1 

CARBON-FIBER 

COMPOSITE 

ROUTERS 

Ø d 1 d 2 

Series 20M-CCR 

Technical 


HA 

120 

No End Cut 

Burr End 

d 1 d 2 l 1 l 2 

mm mm mm mm 

6 6 63 25 

8 6 63 25 

10 10 63 28 

12 12 89 38 

Uncoated 

EDP No. 

82966 

82968 

82970 

82972 

d 1 d 2 l 1 l 2 

mm mm mm mm 

6 6 63 25 

8 6 63 25 

10 10 63 28 

12 12 89 38 

Uncoated 

EDP No. 

82967 

82969 

82971 

82973 

Endmills 

No End Cut – Coarse Cut 

Burr End – Coarse Cut 

d 1 d 2 l 1 l 2 

mm mm mm mm 

6 6 63 25 

8 8 63 25 

10 10 63 28 

12 12 89 38 

Uncoated 

EDP No. 

82975 

82977 

82979 

82981 

d 1 d 2 l 1 l 2 

mm mm mm mm 

6 6 63 25 

8 8 63 25 

10 10 63 28 

12 12 89 38 

Uncoated 

EDP No. 

82974 

82976 

82978 

82980 

Availability on request 

Availability on request 

Conventional Router vs. SGS Series 20-CCR Carbon Composite Routers 

Conventional Router Results 

Material: Carbon-Fibre-Reinforced Polymer (CFRP) 

SGS Series 20-CCR Results 

Material: Carbon-Fibre-Reinforced Polymer (CFRP) 

Tool side edge, unacceptable 

fibre breakout (10X view) 

Tool side edge, no fibre breakout, 

acceptable edge (10X view) 

Unacceptable edge finish 

(25X view) 

Acceptable edge finish 

(25X view) 

37 


www.sgstool.com

Endmills 

FGR – Fibreglass Routers 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

1,6-12 +0/-0,127 h 6 

Technical 


HA 120 

FGR - Style A - No End Cut 

FGR - Style C - End Mill End 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1,6 3 38 5 

2,4 3 38 9,5 

3 3 38 12 

4 4 50 16 

4 6 50 16 

6 6 50 19 

6 6 63 19 

6 6 75 25 

8 8 63 25 

10 10 75 25 

12 12 75 25 

Uncoated 

EDP No. 

83001 

83002 

83003 

83004 

83005 

83006 

83007 

83008 

83009 

83010 

83011 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1,6 3 38 5 

2,4 3 38 9,5 

3 3 38 12 

4 4 50 16 

4 6 50 16 

6 6 50 19 

6 6 63 19 

6 6 75 25 

8 8 63 25 

10 10 75 25 

12 12 75 25 

Uncoated 

EDP No. 

83030 

83031 

83032 

83033 

83034 

83035 

83036 

83037 

83038 

83039 

83040 

FGR - Style B - Burr End 

FGR - Style D - Drill End 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1,6 3 38 5 

2,4 3 38 9,5 

3 3 38 12 

4 4 50 16 

4 6 50 16 

6 6 50 19 

6 6 63 19 

6 6 75 25 

8 8 63 25 

10 10 75 25 

12 12 75 25 

Uncoated 

EDP No. 

83015 

83016 

83017 

83018 

83019 

83020 

83021 

83022 

83023 

83024 

83025 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1,6 3 38 5 

2,4 3 38 9,5 

3 3 38 12 

4 4 50 16 

4 6 50 16 

6 6 50 19 

6 6 63 19 

6 6 75 25 

8 8 63 25 

10 10 75 25 

12 12 75 25 

Uncoated 

EDP No. 

83045 

83046 

83047 

83048 

83049 

83050 

83051 

83052 

83053 

83054 

83055 

38 


Product Group 1

Endmills 

Series 1M – 4 Flute Radius Endmill 

Tolerances: 

Ø d 1 d 2 

4-16 +0/-0,05 +0/-0,01 


Technical 


30° 

Corner Radius - Series 1MCR 

4 

HA 

121 



4 4 50 14 0,25 

4 4 50 14 0,50 

4 4 50 14 0,75 

4 4 50 14 1,00 

5 6 50 16 0,25 

5 6 50 16 0,50 

5 6 50 16 0,75 

5 6 50 16 1,00 

5 6 50 16 1,25 

6 6 50 19 0,25 

6 6 50 19 0,50 

6 6 50 19 0,75 

6 6 50 19 1,00 

6 6 50 19 1,25 

6 6 50 19 1,50 

8 8 63 20 0,50 

8 8 63 20 0,75 

8 8 63 20 1,00 

8 8 63 20 1,25 

8 8 63 20 1,50 

8 8 63 20 2,00 

10 10 75 22 0,50 

10 10 75 22 0,75 

10 10 75 22 1,00 

10 10 75 22 1,50 

10 10 75 22 2,00 

10 10 75 22 3,00 

10 10 75 22 3,20 

12 12 75 25 0,50 

12 12 75 25 0,75 

12 12 75 25 1,00 

12 12 75 25 1,50 

12 12 75 25 2,00 

12 12 75 25 3,00 

12 12 75 25 3,20 

16 16 89 32 0,50 

16 16 89 32 0,75 

16 16 89 32 1,00 

16 16 89 32 1,50 

16 16 89 32 2,00 

16 16 89 32 3,00 

16 16 89 32 3,20 

Ti-NAMITE-A® 

EDP No. 

40000 

40001 

40002 

40003 

40004 

40005 

40006 

40007 

40008 

40009 

40010 

40011 

40012 

40013 

40014 

40015 

40016 

40017 

40018 

40019 

40020 

40021 

40022 

40023 

40024 

40025 

40026 

40027 

40028 

40029 

40030 

40031 

40032 

40033 

40034 

40035 

40036 

40037 

40038 

40039 

40040 

40041 

Endmills 

39 


www.sgstool.com

Endmills 

Series 1M – 4 Flute Endmill 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

Technical 


30° 4 

HA 

121 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40105 

40109 

40113 

40117 

40121 

40125 

40129 

40133 

40137 

40141 

40145 

40149 

40153 

40157 

40161 

41665 

40169 

40173 

40177 

40181 

40185 

Ti-NAMITE-A® 

EDP No. 

48543 

48544 

48545 

48546 

48547 

48548 

48549 

48550 

48551 

48552 

48553 

48554 

48555 

48556 

48557 

48558 

48559 

48560 

48561 

48562 

48563 

40 


Product Group 1

Endmills 

Series 1MB – 4 Flute Endmill 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

Technical 


30° 4 

HA 

121 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40106 

40110 

40114 

40118 

40122 

40126 

40130 

40134 

40138 

40142 

40146 

40150 

40154 

40158 

40162 

40166 

40170 

40174 

40178 

40182 

40186 

Ti-NAMITE-A® 

EDP No. 

48607 

48608 

48609 

48610 

48611 

48612 

48613 

48614 

48615 

48616 

48617 

48618 

48619 

48620 

48621 

48622 

48623 

48624 

48625 

48626 

48627 

Endmills 

41 


www.sgstool.com

Endmills 

DIN 6528 – 4 Flute Endmill DIN Standard 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

d 1 d 2 

h 10 h 6 

Technical 


30° 4 

HA 

121 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

4 4 50 11 

5 5 50 13 

5,5 5,5 57 13 

6 6 57 13 

6,5 6,5 60 16 

7 7 60 16 

7,5 7,5 63 19 

8 8 63 19 

8,5 8,5 67 19 

9 9 67 19 

9,5 9,5 72 22 

10 10 72 22 

11 11 83 26 

12 12 83 26 

13 13 83 26 

14 14 83 26 

15 15 92 32 

16 16 92 32 

18 18 92 32 

20 20 104 38 

Uncoated 

EDP No. 

45425 

45433 

45435 

45437 

45439 

45441 

45443 

45445 

45447 

45449 

45451 

45453 

45455 

45457 

45459 

45461 

45463 

45465 

45469 

45473 

Ti-NAMITE-A® 

EDP No. 

45400 

45402 

45403 

45404 

45405 

45406 

45407 

45408 

45409 

45410 

45411 

45412 

45413 

45414 

45415 

45416 

45417 

45418 

45419 

45420 

42 


Product Group 1

Endmills 

Series 1XLM – 4 Flute Extra Long Series 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


30° 4 

HA 

121 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43101 

43103 

43107 

43105 

43115 

43125 

43135 

43145 

43155 

43165 

43175 

43185 

43195 

Ti-NAMITE-A® 

EDP No. 

49414 

49415 

49417 

49416 

49418 

49419 

49420 

49421 

49422 

49423 

49424 

49425 

49426 

Endmills 

43 


www.sgstool.com

Endmills 

Series 1XLMB – 4 Flute Extra Long Series 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


30° 4 

HA 

121 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43102 

43104 

43108 

43106 

43116 

43126 

43136 

43146 

43156 

43166 

43176 

43186 

43196 

Ti-NAMITE-A® 

EDP No. 

49531 

49532 

49534 

49533 

49535 

49536 

49537 

49538 

49539 

49540 

49541 

49542 

49543 

44 


Product Group 1

Endmills 

Series 16M – 4 Flute Short Length 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 4 

HA 

121 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 50 9,5 

5 5 50 10 

6 6 50 12 

7 8 50 12 

8 8 50 12 

9 9 50 14 

10 10 50 16 

11 12 63 19 

12 12 63 19 

Uncoated 

EDP No. 

41605 

41609 

41613 

41617 

41621 

41625 

41629 

41633 

41637 

41641 

41645 

41649 

41653 

41657 

41661 

40165 

Ti-NAMITE-A® 

EDP No. 

49178 

49179 

49180 

49181 

49182 

49183 

49184 

49185 

49186 

49187 

49188 

49189 

49190 

49191 

49192 

49193 

Endmills 

45 


www.sgstool.com

Endmills 

Series 14M – 4 Flute Double Ended 

l 1 

l 2 

d 2 

d 1 

121 

Tolerances: 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 

4 

HA 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 63 9,5 

5 5 63 10 

6 6 63 12 

7 8 63 12 

8 8 63 12 

9 9 75 14 

10 10 75 14 

11 12 75 14 

12 12 75 16 

Uncoated 

EDP No. 

41405 

41409 

41413 

41417 

41421 

41425 

41429 

41433 

41437 

41441 

41445 

41449 

41453 

41457 

41461 

41465 

Ti-NAMITE-A® 

EDP No. 

48926 

48927 

48928 

48929 

48930 

48931 

48932 

48933 

48934 

48935 

48936 

48937 

48938 

48939 

48940 

48941 

46 


Product Group 1

Endmills 

Series 14MB – 4 Flute Double Ended 

l 1 

l 2 

d 2 

Tolerances: 

d 1 

121 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 

4 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 63 9,5 

5 5 63 10 

6 6 63 12 

7 8 63 12 

8 8 63 12 

9 9 75 14 

10 10 75 14 

11 12 75 14 

12 12 75 16 

Uncoated 

EDP No. 

41406 

41410 

41414 

41418 

41422 

41426 

41430 

41434 

41438 

41442 

41446 

41450 

41454 

41458 

41462 

41466 

Ti-NAMITE-A® 

EDP No. 

48989 

48990 

48991 

48992 

48993 

48994 

48995 

48996 

48997 

48998 

48999 

49000 

49001 

49002 

49003 

49004 

Endmills 

47 


www.sgstool.com

Endmills 

Series 5M – 3 Flute 

l 1 

l 2 

Tolerances: 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

d 1 

d 2 

121 

Technical 


30° 

3 

HA 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40505 

40509 

40513 

40517 

40521 

40525 

40529 

40533 

40537 

40541 

40545 

40549 

40553 

40557 

40561 

40565 

40569 

40573 

40577 

40581 

40585 

Ti-NAMITE-A® 

EDP No. 

48799 

48800 

48801 

48802 

48803 

48804 

48805 

48806 

48807 

48808 

48809 

48810 

48811 

48812 

48813 

48814 

48815 

48816 

48817 

48818 

48819 

48 


Product Group 1

Endmills 

Series 5MB – 3 Flute 

l 1 

l 2 

d 2 

Tolerances: 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

d 1 

121 

Technical 


30° 

3 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40506 

40510 

40514 

40518 

40522 

40526 

40530 

40534 

40538 

40542 

40546 

40550 

40554 

40558 

40562 

40566 

40570 

40574 

40578 

40582 

40586 

Ti-NAMITE-A® 

EDP No. 

48863 

48864 

48865 

48866 

48867 

48868 

48869 

48870 

48871 

48872 

48873 

48874 

48875 

48876 

48877 

48878 

48879 

48880 

48881 

48882 

48883 

Endmills 

49 


www.sgstool.com

Endmills 


l 2 

121 

30° 3 

HA 

d 2 

d 1 

l 1 

Tolerances: 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43501 

43503 

43507 

43505 

43515 

43525 

43535 

43545 

43555 

43565 

43575 

43585 

43595 

Ti-NAMITE-A® 

EDP No. 

49492 

49493 

49495 

49494 

49496 

49497 

49498 

49499 

49500 

49501 

49502 

49503 

49504 

50 


Product Group 1

Endmills 


l 2 

d 2 

121 

d 1 

l 1 

Tolerances: 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


30° 

3 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43502 

43504 

43508 

43506 

43516 

43526 

43536 

43546 

43556 

43566 

43576 

43586 

43596 

Ti-NAMITE-A® 

EDP No. 

49609 

49610 

49612 

49611 

49613 

49614 

49615 

49616 

49617 

49618 

49619 

49620 

49621 

Endmills 

51 


www.sgstool.com

Endmills 

Series 3M – 2 Flute 

l 1 

l 2 

Tolerances: 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

d 1 

d 2 

121 

Technical 


30° 

2 

HA 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40305 

40309 

40313 

40317 

40321 

40325 

40329 

40333 

40337 

40341 

40345 

40349 

40353 

40357 

40361 

40365 

40369 

40373 

40377 

40381 

40385 

Ti-NAMITE-A® 

EDP No. 

48671 

48672 

48673 

48674 

48675 

48676 

48677 

48678 

48679 

48680 

48681 

48682 

48683 

48684 

48685 

48686 

48687 

48688 

48689 

48690 

48691 

52 


Product Group 1

Endmills 

Series 3MB – 2 Flute 

l 1 

l 2 

Tolerances: 

Ø d 1 d 2 

1-25 +0/-0,05 h 6 

d 1 

d 2 

121 

Technical 


30° 

2 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 4 

1,5 3 38 4,5 

2 3 38 6,3 

2,5 3 38 9,5 

3 3 38 12 

3,5 4 50 12 

4 4 50 14 

4,5 6 50 16 

5 6 50 16 

6 6 50 19 

7 8 63 19 

8 8 63 20 

9 10 75 22 

10 10 75 22 

11 12 75 25 

12 12 75 25 

14 14 89 32 

16 16 89 32 

18 18 100 38 

20 20 100 38 

25 25 100 38 

Uncoated 

EDP No. 

40306 

40310 

40314 

40318 

40322 

40326 

40330 

40334 

40338 

40342 

40346 

40350 

40354 

40358 

40362 

40366 

40370 

40374 

40378 

40382 

40386 

Ti-NAMITE-A® 

EDP No. 

48735 

48736 

48737 

48738 

48739 

48740 

48741 

48742 

48743 

48744 

48745 

48746 

48747 

48748 

48749 

48750 

48751 

48752 

48753 

48754 

48755 

Endmills 

53 


www.sgstool.com

Endmills 


l 2 

d 2 

121 

d 1 

l 1 

Tolerances: 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


30° 

2 

HA 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43301 

43303 

43307 

43305 

43315 

43325 

43335 

43345 

43355 

43365 

43375 

43385 

43395 

Ti-NAMITE-A® 

EDP No. 

49453 

49454 

49456 

49455 

49457 

49458 

49459 

49460 

49461 

49462 

49463 

49464 

49465 

54 


Product Group 1

Endmills 


l 2 

d 2 

121 

d 1 

l 1 

Tolerances: 

Ø d 1 d 2 

3-25 +0/-0,05 h 6 

Technical 


30° 

2 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

3 3 75 25 

4 4 75 25 

5 5 75 25 

6 6 75 25 

8 8 75 25 

10 10 100 38 

12 12 100 50 

12 12 150 75 

14 14 150 75 

16 16 150 75 

18 18 150 75 

20 20 150 75 

25 25 150 75 

Uncoated 

EDP No. 

43302 

43304 

43308 

43306 

43316 

43326 

43336 

43346 

43356 

43366 

43376 

43386 

43396 

Ti-NAMITE-A® 

EDP No. 

49570 

49571 

49573 

49572 

49574 

49575 

49576 

49577 

49578 

49579 

49580 

49581 

49582 

Endmills 

55 


www.sgstool.com

Endmills 

Series 17M – 2 Flute Short Length 

l 1 

l 2 

Tolerances: 

d 1 

d 2 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 

2 

HA 

121 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 50 9,5 

5 5 50 10 

6 6 50 12 

7 8 50 12 

8 8 50 12 

9 9 50 14 

10 10 50 16 

11 12 63 19 

12 12 63 19 

Uncoated 

EDP No. 

41705 

41709 

41713 

41717 

41721 

41725 

41729 

41733 

41737 

41741 

41745 

41749 

41753 

41757 

41761 

41765 

Ti-NAMITE-A® 

EDP No. 

49304 

49305 

49306 

49307 

49308 

49309 

49310 

49311 

49312 

49313 

49314 

49315 

49316 

49317 

49318 

49319 

56 


Product Group 1

Endmills 

Series 15M – 2 Flute Double Ended 

l 1 

l 2 

d 2 

d 1 

121 

Tolerances: 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 

2 

HA 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 63 9,5 

5 5 63 10 

6 6 63 12 

7 8 63 12 

8 8 63 12 

9 9 75 14 

10 10 75 14 

11 12 75 14 

12 12 75 16 

Uncoated 

EDP No. 

41505 

41509 

41513 

41517 

41521 

41525 

41529 

41533 

41537 

41541 

41545 

41549 

41553 

41557 

41561 

41565 

Ti-NAMITE-A® 

EDP No. 

49052 

49053 

49054 

49055 

49056 

49057 

49058 

49059 

49060 

49061 

49062 

49063 

49064 

49065 

49066 

49067 

Endmills 

57 


www.sgstool.com

Endmills 

Series 15MB – 2 Flute Double Ended 

l 1 

l 2 

d 2 

d 1 

121 

Tolerances: 

Ø d 1 d 2 

1-12 +0/-0,05 h 6 

Technical 


30° 

2 

HA 

Endmills 

d 1 d 2 l 1 l 2 

mm mm mm mm 

1 3 38 2 

1,5 3 38 3 

2 3 38 4 

2,5 3 38 5 

3 3 38 6 

3,5 4 50 7 

4 4 50 8 

4,5 4,5 63 9,5 

5 5 63 10 

6 6 63 12 

7 8 63 12 

8 8 63 12 

9 9 75 14 

10 10 75 14 

11 12 75 14 

12 12 75 16 

Uncoated 

EDP No. 

41506 

41510 

41514 

41518 

41522 

41526 

41530 

41534 

41538 

41542 

41546 

41550 

41554 

41558 

41562 

41566 

Ti-NAMITE-A® 

EDP No. 

49115 

49116 

49117 

49118 

49119 

49120 

49121 

49122 

49123 

49124 

49125 

49126 

49127 

49128 

49129 

49130 

58 


Product Group 1

Endmills 

MK2M – 2 Flute Micro Range 

l 1 

l 2 

Tolerances: 

d 1 

Ø d 1 d 2 

0-1,52 +/-0,013 h 6 

d 2 

= 3,17mm 

Technical 


30° 

2 

HA 

121 

d 1 d 2 I 1 I 2 

mm mm mm mm 

0,20 3,17 38 0,30 

0,23 3,17 38 0,36 

0,25 3,17 38 0,38 

0,28 3,17 38 0,43 

0,30 3,17 38 0,46 

0,33 3,17 38 0,51 

0,36 3,17 38 0,53 

0,38 3,17 38 0,58 

0,41 3,17 38 0,61 

0,43 3,17 38 0,66 

0,46 3,17 38 0,69 

0,48 3,17 38 0,74 

0,51 3,17 38 0,76 

0,53 3,17 38 0,81 

0,56 3,17 38 0,84 

0,58 3,17 38 0,89 

0,61 3,17 38 0,91 

0,63 3,17 38 0,96 

0,66 3,17 38 0,99 

0,69 3,17 38 1,04 

0,71 3,17 38 1,07 

0,74 3,17 38 1,12 

0,76 3,17 38 1,14 

0,79 3,17 38 1,19 

0,89 3,17 38 1,35 

1,02 3,17 38 1,52 

1,19 3,17 38 1,80 

1,27 3,17 38 1,90 

1,40 3,17 38 2,11 

1,52 3,17 38 2,29 

Uncoated 

EDP No. 

39208 

39209 

39210 

39211 

39212 

39213 

39214 

39215 

39216 

39217 

39218 

39219 

39220 

39221 

39222 

39223 

39224 

39225 

39226 

39227 

39228 

39229 

39230 

39231 

39235 

39240 

39247 

39250 

39255 

39260 

Endmills 


59 

www.sgstool.com

Drills 

60 

www.sgstool.com

Drills 

Drills 

61 

www.sgstool.com

Drills 

Drills 

Drills: Hi-PerCarb Series 108M Series 106M Series 103M ICe-Carb 5D ICe-Carb 8D Series 101M 

Material: 

Structural Steel ● ● ● ● 

Case Hardening Steel ● ● ● ● ● 

Steel Alloys ● ● ● ● ● 

Gray Cast Iron ● ● ● ● ● ● ● 

Malleable Cast Iron ● ● ● ● ● ● ● 

Tool Steel: 

< 45HRC ● ● ● ● ● 

< 50HRC ● ● ● ● ● 

< 55HRC ● 

< 60HRC ● 

> 60HRC ● 

Stainless Steel ● ● ● ● ● 

Titanium Alloys ● ● ● ● ● 

High Temp. Alloys ● ● ● ● ● 

Inconel ● ● ● ● ● 

Nickel Alloys ● ● ● ● ● 

Aluminium ● ● ● ● ● ● 

Copper ● ● ● ● ● ● 

Plastic ● ● ● ● ● 

CFK/GFK ● ● ● ● ● ● 

62 

www.sgstool.com

Drills 

Product 

Group 

Drills 

Number of 

Flutes 

Page 

Material 

Group 

3 Hi-PerCarb® – High Accuracy Drill/Reamer-Series 135M, 3 x D 2 64 

2/3 

3 

3 

Series 108M PLUS – Stub Length four Facet Point for excellent all 

round performance 

ICe-Carb 5D – High Performance Drill - Series 140M, 5 x D 

with internal cooling 

ICe-Carb – High Performance Drill Series 140M, 8 x D 

with internal cooling 

2 66 

2 68 

2 70 

2 Series 106M DIN 6539 – for Case Hardening Steel 2 72 

2 

3 Flute Drill for Drilling of Aluminium and Cast Iron Materials – 

Series 103 M DIN 6539 

3 73 

2 Jobber Drill –Series 101M DIN 338 2 74 

Product 

Group 

Combined Drill and Countersink 

Number of 

Flutes 

Page 

2 Combined Drill and Countersink Series 301M DIN 333 2 75 

Drills 

Product 

Group 

Reamers 

Number of 

Flutes 

Page 

2 Reamers Series 201M 4 / 6 75 

63 

www.sgstool.com

Drills 

Hi-PerCarb TM – High Accuracy Drill/Reamer-Series 135M, 3 x D 

Drill /Reamer for Aerospace Alloys 

l 1 

d 1 

l 2 

l 3 

d 2 

Tolerances: 

Ø d 1 d 2 

≤ 3 +0,0025 / +0,0127 h6 

> 3 - 6 +0,0050 / +0,0152 h6 

> 6 - 10 +0,0050 / +0,0200 h6 

> 10 - 18 +0,0076 / +0,0254 h6 

> 18 - 30 +0,0076 / +0,0279 h6 

Technical 


145° 32° 

2 

HA 

122 

Drills 

d 1 d 2 l 1 l 2 l 3 


3,00 6 62 20 17 

3,10 6 62 20 17 

3,20 6 62 20 17 

3,30 6 62 20 17 

3,40 6 62 20 17 

3,50 6 62 20 17 

3,60 6 62 20 17 

3,70 6 62 20 17 

3,80 6 62 20 17 

3,90 6 62 20 17 

4,00 6 66 24 21 

4,10 6 66 24 21 

4,20 6 66 24 21 

4,30 6 66 24 21 

4,40 6 66 24 21 

4,50 6 66 24 21 

4,60 6 66 24 21 

4,70 6 66 24 21 

4,80 6 66 24 21 

4,90 6 66 24 21 

5,00 6 66 24 21 

5,10 6 66 24 21 

5,20 6 66 24 21 

5,25 6 66 24 21 

5,30 6 66 24 21 

5,40 6 66 24 21 

5,50 6 66 24 21 

5,60 6 66 24 21 

5,70 6 66 24 21 

5,80 6 66 24 21 

5,90 6 66 24 21 

Self Centering 

Ti-NAMITE-A® 

EDP No. 

63155 

63741 

63156 

63157 

63158 

63159 

63160 

63161 

63742 

63743 

63162 

63744 

63163 

63164 

63745 

63165 

63166 

63746 

63167 

63747 

63168 

63748 

63749 

63169 

63170 

63750 

63171 

63751 

63752 

63172 

63753 

d 1 d 2 l 1 l 2 l 3 


6,00 6 66 24 21 

6,10 8 79 34 28 

6,20 8 79 34 28 

6,25 8 79 34 28 

6,30 8 79 34 28 

6,40 8 79 34 28 

6,50 8 79 34 28 

6,60 8 79 34 28 

6,70 8 79 34 28 

6,80 8 79 34 28 

6,90 8 79 34 28 

7,00 8 79 34 28 

7,10 8 79 34 28 

7,20 8 79 34 28 

7,25 8 79 34 28 

7,30 8 79 34 28 

7,40 8 79 34 28 

7,50 8 79 34 28 

7,60 8 79 34 28 

7,70 8 79 34 28 

7,80 8 79 34 28 

7,90 8 79 34 28 

8,00 8 79 34 28 

8,10 10 89 47 40 

8,20 10 89 47 40 

8,30 10 89 47 40 

8,40 10 89 47 40 

8,50 10 89 47 40 

8,60 10 89 47 40 

8,70 10 89 47 40 

8,80 10 89 47 40 

8,90 10 89 47 40 

Ti-NAMITE-A® 

EDP No. 

63173 

63754 

63755 

63174 

63756 

63175 

63213 

51605 

63758 

63176 

63759 

63177 

63760 

63761 

63178 

63762 

63763 

63179 

63764 

63765 

63180 

63766 

63181 

63767 

63768 

63769 

63182 

63183 

63770 

63771 

63184 

63772 

Continued on next page 

64 


Drills 

Hi-PerCarb TM – High Accuracy Drill/Reamer-Series 135M, 3 x D 

d 1 d 2 l 1 l 2 l 3 


9,00 10 89 47 40 

9,10 10 89 47 40 

9,20 10 89 47 40 

9,25 10 89 47 40 

9,30 10 89 47 40 

9,40 10 89 47 40 

9,50 10 89 47 40 

9,60 10 89 47 40 

9,70 10 89 47 40 

9,80 10 89 47 40 

9,90 10 89 47 40 

10,00 10 89 47 40 

10,10 12 102 55 45 

10,20 12 102 55 45 

10,30 12 102 55 45 

10,40 12 102 55 45 

10,50 12 102 55 45 

10,60 12 102 55 45 

10,70 12 102 55 45 

10,80 12 102 55 45 

10,90 12 102 55 45 

11,00 12 102 55 45 

11,10 12 102 55 45 

11,20 12 102 55 45 

11,25 12 102 55 45 

11,30 12 102 55 45 

11,40 12 102 55 45 

11,50 12 102 55 45 

11,60 12 102 55 45 

11,70 12 102 55 45 

11,80 12 102 55 45 

11,90 12 102 55 45 


Ti-NAMITE-A® 

EDP No. 

63185 

63773 

63774 

63186 

63775 

63776 

63187 

63777 

63778 

63779 

63780 

63188 

63781 

63189 

63782 

63783 

63190 

63784 

63785 

63191 

63786 

63192 

63787 

63788 

63193 

63789 

63790 

63194 

63791 

63792 

63793 

63794 

d 1 d 2 l 1 l 2 l 3 


12,00 12 102 55 45 

12,50 14 107 60 49 

12,80 14 107 60 49 

13,00 14 107 60 49 

13,50 14 107 60 49 

14,00 14 107 60 49 

14,50 16 115 65 51 

15,00 16 115 65 51 

15,50 16 115 65 51 

16,00 16 115 65 51 

16,50 18 123 73 58 

17,00 18 123 73 58 

17,50 18 123 73 58 

18,00 18 123 73 58 

18,50 20 131 79 63 

19,00 20 131 79 63 

19,50 20 131 79 63 

20,00 20 131 79 63 

Ti-NAMITE-A® 

EDP No. 

63195 

63196 

63197 

63198 

63199 

63200 

63201 

63202 

63203 

63204 

63205 

63206 

63207 

63208 

63209 

63210 

63211 

63212 

Drills 

65 


www.sgstool.com

Drills 

Series 108M PLUS 

Stub Length Four Facet Point for Excellent All Round Performance 

d 1 

l 3 

l 2 

l 1 

Tolerances: 

Ø d 1 d 2 

0,5-16 h 7 h 7 

Technical 


122 

145° 

27° 

2 

HA 

Drills 

66 


d 1 d 2 l 1 l 2 l 3 


0,5 0,5 20 3 3 

0,55 0,55 21 3,5 3,5 

0,6 0,6 21 3,5 3,5 

0,65 0,65 22 4 4 

0,7 0,7 23 4,5 4,5 

0,75 0,75 23 4,5 4,5 

0,8 0,8 24 5 5 

0,85 0,85 24 5 5 

0,9 0,9 25 5,5 5,5 

0,95 0,95 25 5,5 5,5 

1,0 1,0 26 6 6 

1,05 1,05 26 6 6 

1,1 1,1 28 7 7 

1,15 1,15 28 7 7 

1,2 1,2 30 8 8 

1,25 1,25 30 8 8 

1,3 1,3 30 8 8 

1,35 1,35 32 9 9 

1,4 1,4 32 9 9 

1,45 1,45 32 9 9 

1,5 1,5 32 9 9 

1,6 1,6 34 10 10 

1,7 1,7 34 10 10 

1,8 1,8 36 11 11 

1,9 1,9 36 11 11 

2,0 2,0 38 12 9 

2,1 2,1 38 12 9 

2,2 2,2 40 13 10 

2,3 2,3 40 13 10 

2,4 2,4 43 14 11 

2,5 2,5 43 14 11 

2,6 2,6 43 14 11 

2,7 2,7 46 16 12 

2,8 2,8 46 16 12 

2,9 2,9 46 16 12 

3,0 3,0 46 16 12 

3,1 3,1 49 18 14 

3,2 3,2 49 18 14 

3,3 3,3 49 18 14 

3,4 3,4 52 20 15 

3,5 3,5 52 20 15 

3,6 3,6 52 20 15 



Uncoated 

EDP No. 

62001 

62003 

62005 

62007 

62009 

62011 

62013 

62015 

62017 

62019 

62021 

62023 

62025 

62027 

62029 

62031 

62033 

62035 

62037 

62039 

62041 

62043 

62045 

62047 

62049 

62051 

62053 

62055 

62057 

62059 

62061 

62063 

62065 

62067 

62069 

62071 

62073 

62075 

62077 

62079 

62081 

62083 

Ti-NAMITE-A® 

EDP No. 

68643 

68644 

68645 

68646 

68647 

68648 

68649 

68650 

68651 

68652 

68653 

68654 

68655 

68656 

68657 

68658 

68659 

68660 

68661 

68662 

68663 

68664 

68665 

68666 

68667 

68668 

68669 

68670 

68671 

68672 

68673 

68674 

68675 

68676 

68677 

68678 

68679 

68680 

68681 

68682 

68683 

68684 

Uncoated, Product Group 2 / Ti-NAMITE-A®, Product Group 3

Drills 

Series 108M PLUS 

d 1 d 2 l 1 l 2 l 3 


3,7 3,7 52 20 15 

3,8 3,8 55 22 17 

3,9 3,9 55 22 17 

4,0 4,0 55 22 17 

4,1 4,1 55 22 17 

4,2 4,2 55 22 17 

4,3 4,3 58 24 18 

4,4 4,4 58 24 18 

4,5 4,5 58 24 18 

4,6 4,6 58 24 18 

4,7 4,7 58 24 18 

4,8 4,8 62 26 20 

4,9 4,9 62 26 20 

5,0 5,0 62 26 20 

5,1 5,1 62 26 20 

5,2 5,2 62 26 20 

5,3 5,3 62 26 20 

5,4 5,4 66 28 21 

5,5 5,5 66 28 21 

5,6 5,6 66 28 21 

5,7 5,7 66 28 21 

5,8 5,8 66 28 21 

5,9 5,9 66 28 21 

6,0 6,0 66 28 21 

6,1 6,1 70 31 23 

6,2 6,2 70 31 23 

6,3 6,3 70 31 23 

6,4 6,4 70 31 23 

6,5 6,5 70 31 23 

6,8 6,8 70 34 25 

7,0 7,0 74 34 25 

7,5 7,5 74 34 25 

7,8 7,8 79 37 27 

8,0 8,0 79 37 27 

8,5 8,5 79 37 27 

9,0 9,0 84 40 29 

9,5 9,5 84 40 29 

9,8 9,8 89 43 31 

10,0 10,0 89 43 31 

10,2 10,2 89 43 31 

10,5 10,5 89 43 31 

11,0 11,0 95 47 33 

11,5 11,5 95 47 33 

11,8 11,8 102 51 35 

12,0 12,0 102 51 35 

12,5 12,5 102 51 35 

13,0 13,0 102 51 35 

13,8 13,8 107 54 37 

14,0 14,0 107 54 37 

14,5 14,5 111 56 38 

14,8 14,8 111 56 38 

15,0 15,0 111 56 38 

15,8 15,8 115 58 38 

16,0 16,0 115 58 38 

Uncoated 

EDP No. 

62085 

62087 

62089 

62091 

62093 

62095 

62097 

62099 

62101 

62103 

62105 

62107 

62109 

62111 

62113 

62115 

62117 

62119 

62121 

62123 

62125 

62127 

62129 

62131 

62133 

62135 

62137 

62139 

62141 

62142 

62143 

62145 

62146 

62147 

62149 

62151 

62153 

62154 

62155 

62156 

62066 

62157 

62084 

62158 

62159 

62102 

62112 

62164 

62116 

62166 

62167 

62168 

62170 

62171 

Ti-NAMITE-A® 

EDP No. 

68685 

68686 

68687 

68688 

68689 

68690 

68691 

68692 

68693 

68694 

68695 

68696 

68697 

68698 

68699 

68700 

68701 

68702 

68703 

68704 

68705 

68706 

68707 

68708 

68709 

68710 

68711 

68712 

68713 

68603 

68718 

68723 

68604 

68728 

68733 

68738 

68743 

68606 

68748 

68607 

68753 

68758 

68763 

68608 

68768 

68773 

68778 

68609 

68780 

68611 

68612 

68613 

68614 

68616 

Drills 


67 

Uncoated, Product Group 2 / Ti-NAMITE-A®, Product Group 3 

www.sgstool.com

Drills 

ICe-Carb 5xD – High Performance Drill Series 140M 

High Performance Internal Cooling Drills for Drilling Depths up to 5xD 

Tolerances: 

Ø d 1 d 2 

≤ 3 +0,0025 / +0,0127 h6 

> 3 - 6 +0,0050 / +0,0152 h6 

> 6 - 10 +0,0050 / +0,0200 h6 

> 10 - 18 +0,0076 / +0,0254 h6 

Technical 


140° 30° 

2 

HA 

122 

Drills 

68 


d 1 d 2 l 1 l 2 l 3 l 4 

Ti-NAMITE-A® 


EDP No. 

3,0 6 66 28 23 36 

63901 

3,1 6 66 28 23 36 

63902 

3,2 6 66 28 23 36 

63903 

3,3 6 66 28 23 36 

63904 

3,4 6 66 28 23 36 

63905 

3,5 6 66 28 23 36 

63906 

3,6 6 66 28 23 36 

63907 

3,7 6 66 28 23 36 

63908 

3,8 6 74 36 29 36 

51904 

3,9 6 74 36 29 36 

63909 

4,0 6 74 36 29 36 

63910 

4,1 6 74 36 29 36 

63911 

4,2 6 74 36 29 36 

63912 

4,3 6 74 36 29 36 

63913 

4,4 6 74 36 29 36 

63914 

4,5 6 74 36 29 36 

63915 

4,6 6 74 36 29 36 

63916 

4,7 6 74 36 29 36 

63917 

4,8 6 82 44 35 36 

63918 

4,9 6 82 44 35 36 

63919 

5,0 6 82 44 35 36 

63920 

5,1 6 82 44 35 36 

63900 

5,2 6 82 44 35 36 

63921 

5,3 6 82 44 35 36 

63922 

5,4 6 82 44 35 36 

63998 

5,5 6 82 44 35 36 

63923 

5,6 6 82 44 35 36 

63924 

5,7 6 82 44 35 36 

63925 

5,8 6 82 44 35 36 

63926 

5,9 6 82 44 35 36 

63927 

6,0 6 82 44 35 36 

63928 

6,1 8 91 53 43 36 

63929 

6,2 8 91 53 43 36 

63930 

6,3 8 91 53 43 36 

63931 

6,4 8 91 53 43 36 

63932 

6,5 8 91 53 43 36 

63933 

6,6 8 91 53 43 36 

63934 

6,7 8 91 53 43 36 

63935 

6,8 8 91 53 43 36 

63936 

6,9 8 91 53 43 36 

63999 

7,0 8 91 53 43 36 

63937 

7,1 8 91 53 43 36 

63938 

7,2 8 91 53 43 36 

63939 

7,3 8 91 53 43 36 

63940 

7,4 8 91 53 43 36 

63941 

* Self 7,5 Centering 8 91 53 43 36 

63942 



Product Group 3

Drills 

ICe-Carb 5xD – High Performance Drill Series 140M 

d 1 d 2 l 1 l 2 l 3 l 4 


7,6 8 91 53 43 36 

7,7 8 91 53 43 36 

7,8 8 91 53 43 36 

7,9 8 91 53 43 36 

8,0 8 91 53 43 36 

8,1 10 103 61 49 40 

8,2 10 103 61 49 40 

8,3 10 103 61 49 40 

8,4 10 103 61 49 40 

8,5 10 103 61 49 40 

8,6 10 103 61 49 40 

8,7 10 103 61 49 40 

8,8 10 103 61 49 40 

8,9 10 103 61 49 40 

9,0 10 103 61 49 40 

9,1 10 103 61 49 40 

9,2 10 103 61 49 40 

9,3 10 103 61 49 40 

9,4 10 103 61 49 40 

9,5 10 103 61 49 40 

9,6 10 103 61 49 40 

9,7 10 103 61 49 40 

9,8 10 103 61 49 40 

9,9 10 103 61 49 40 

10,0 10 103 61 49 40 

10,1 12 118 71 56 45 

10,2 12 118 71 56 45 

10,3 12 118 71 56 45 

10,4 12 118 71 56 45 

10,5 12 118 71 56 45 

10,6 12 118 71 56 45 

10,7 12 118 71 56 45 

10,8 12 118 71 56 45 

10,9 12 118 71 56 45 

11,0 12 118 71 56 45 

11,1 12 118 71 56 45 

11,2 12 118 71 56 45 

11,3 12 118 71 56 45 

11,4 12 118 71 56 45 

11,5 12 118 71 56 45 

11,6 12 118 71 56 45 

11,7 12 118 71 56 45 

11,8 12 118 71 56 45 

11,9 12 118 71 56 45 

12,0 12 118 71 56 45 

12,5 14 124 77 60 45 

12,8 14 124 77 60 45 

13,0 14 124 77 60 45 

13,5 14 124 77 60 45 

13,8 14 124 77 60 45 

14,0 14 124 77 60 45 

14,5 16 133 83 63 48 

14,8 16 133 83 63 48 

15,0 16 133 83 63 48 

15,5 16 133 83 63 48 

15,8 16 133 83 63 48 

16,0 16 133 83 63 48 


Ti-NAMITE-A® 

EDP No. 

63943 

63944 

63945 

63946 

63947 

63948 

63949 

63950 

63951 

63952 

63953 

63954 

63955 

63956 

63957 

63958 

63959 

63960 

63961 

63962 

63963 

63964 

63965 

63966 

63967 

63968 

63969 

63970 

63971 

63972 

63973 

63974 

63975 

63976 

63977 

63978 

63979 

63980 

63981 

64000 

63982 

63983 

63984 

63985 

63986 

63987 

63988 

63989 

64001 

63990 

63991 

63992 

63993 

63994 

63995 

63996 

63997 

69 

Drills 


www.sgstool.com

Drills 

ICe-Carb – High Performance Drill Series 140M , 8 x D 

l 2 

l 1 

Tolerances: 

d 1 

l 3 

l 4 

d 2 

Ø d 1 d 2 

≤ 3 +0,002 / +0,012 h6 

> 3 - 6 +0,004 / +0,016 h6 

> 6 - 10 +0,006 / +0,021 h6 

> 10 - 18 +0,007 / +0,025 h6 

Technical 


123 

140° 

30° 

2 

HA 

Drills 

70 


d 1 d 2 l 1 l 2 l 3 l 4 


3,0 6 72 34 29 36 

3,1 6 72 34 29 36 

3,2 6 72 34 29 36 

3,3 6 72 34 29 36 

3,4 6 72 34 29 36 

3,5 6 72 34 29 36 

3,6 6 72 34 29 36 

3,7 6 72 34 29 36 

3,8 6 81 43 36 36 

3,9 6 81 43 36 36 

4,0 6 81 43 36 36 

4,1 6 81 43 36 36 

4,2 6 81 43 36 36 

4,3 6 81 43 36 36 

4,4 6 81 43 36 36 

4,5 6 81 43 36 36 

4,6 6 81 43 36 36 

4,7 6 81 43 36 36 

4,8 6 95 57 48 36 

4,9 6 95 57 48 36 

5,0 6 95 57 48 36 

5,1 6 95 57 48 36 

5,2 6 95 57 48 36 

5,3 6 95 57 48 36 

5,4 6 95 57 48 36 

5,5 6 95 57 48 36 

5,6 6 95 57 48 36 

5,7 6 95 57 48 36 

5,8 6 95 57 48 36 

5,9 6 95 57 48 36 

6,0 6 95 57 48 36 

6,1 8 114 76 64 36 

6,2 8 114 76 64 36 

6,3 8 114 76 64 36 

6,4 8 114 76 64 36 

6,5 8 114 76 64 36 

6,6 8 114 76 64 36 

6,7 8 114 76 64 36 

6,8 8 114 76 64 36 

6,9 8 114 76 64 36 

7,0 8 114 76 64 36 

7,1 8 114 76 64 36 

7,2 8 114 76 64 36 

7,3 8 114 76 64 36 

7,4 8 114 76 64 36 

7,5 8 114 76 64 36 




Ti-NAMITE-A® 

EDP No. 

63575 

63576 

63577 

63578 

63579 

63580 

63581 

63582 

63583 

63584 

63585 

63586 

63587 

63588 

63589 

63590 

63591 

63592 

63593 

63594 

63595 

63596 

63597 

63598 

63599 

63600 

63601 

63602 

63603 

63604 

63605 

63606 

63607 

63608 

63609 

63610 

63611 

63612 

63613 

63614 

63615 

63616 

63617 

63618 

63619 

63620

Drills 

ICe-Carb – High Performance Drill Series 140M , 8 x D 

d 1 d 2 l 1 l 2 l 3 l 4 


7,6 8 114 76 64 36 

7,7 8 114 76 64 36 

7,8 8 114 76 64 36 

7,9 8 114 76 64 36 

8,0 8 114 76 64 36 

8,1 10 142 95 80 40 

8,2 10 142 95 80 40 

8,3 10 142 95 80 40 

8,4 10 142 95 80 40 

8,5 10 142 95 80 40 

8,6 10 142 95 80 40 

8,7 10 142 95 80 40 

8,8 10 142 95 80 40 

8,9 10 142 95 80 40 

9,0 10 142 95 80 40 

9,1 10 142 95 80 40 

9,2 10 142 95 80 40 

9,3 10 142 95 80 40 

9,4 10 142 95 80 40 

9,5 10 142 95 80 40 

9,6 10 142 95 80 40 

9,7 10 142 95 80 40 

9,8 10 142 95 80 40 

9,9 10 142 95 80 40 

10,0 10 142 95 80 40 

10,1 12 162 114 96 45 

10,2 12 162 114 96 45 

10,3 12 162 114 96 45 

10,4 12 162 114 96 45 

10,5 12 162 114 96 45 

10,6 12 162 114 96 45 

10,7 12 162 114 96 45 

10,8 12 162 114 96 45 

10,9 12 162 114 96 45 

11,0 12 162 114 96 45 

11,1 12 162 114 96 45 

11,2 12 162 114 96 45 

11,3 12 162 114 96 45 

11,4 12 162 114 96 45 

11,5 12 162 114 96 45 

11,6 12 162 114 96 45 

11,7 12 162 114 96 45 

11,8 12 162 114 96 45 

11,9 12 162 114 96 45 

12,0 12 162 114 96 45 

12,5 14 178 133 112 45 

12,8 14 178 133 112 45 

13,0 14 178 133 112 45 

13,5 14 178 133 112 45 

13,8 14 178 133 112 45 

14,0 14 178 133 112 45 

14,5 16 203 152 128 48 

14,8 16 203 152 128 48 

15,0 16 203 152 128 48 

15,5 16 203 152 128 48 

15,8 16 203 152 128 48 

16,0 16 203 152 128 48 


Ti-NAMITE-A® 

EDP No. 

63621 

63622 

63623 

63624 

63625 

63626 

63627 

63628 

63629 

63630 

63631 

63632 

63633 

63634 

63635 

63636 

63637 

63638 

63639 

63640 

63641 

63642 

63643 

63644 

63645 

63646 

63647 

63648 

63649 

63650 

63651 

63652 

63653 

63654 

63655 

63656 

63657 

63658 

63659 

63660 

63661 

63662 

63663 

63664 

63665 

63666 

63667 

63668 

63669 

63670 

63671 

63672 

63673 

63674 

63675 

63676 

63677 

71 

Drills 


www.sgstool.com

Drills 

Series 106M – DIN 6529 

For Case Hardening Steel 

l 

1 

l 

2 

Tolerances: 

d 1 

l 

3 

d 2 

Ø d 1 d 2 

1-12 h 7 h 7 

Technical 


123 

140° 0° 

2 

HA 

Drills 

d 1 l 1 l 2 l 3 

mm mm mm mm 

1 26 6 4,5 

1,5 32 9 6 

2 38 12 9 

2,5 43 14 11 

3 46 16 12 

3,5 52 20 15 

4 55 22 17 

4,5 58 24 18 

5 62 26 20 

5,5 66 28 21 

6 66 28 21 

6,5 70 31 23 

7 74 34 25 

7,5 74 34 25 

8 79 37 27 

8,5 79 37 27 

9 84 40 29 

9,5 84 40 29 

10 89 43 31 

10,5 89 43 31 

11 95 47 33 

11,5 95 47 33 

12 102 51 35 


Uncoated 

EDP No. 

66001 

66003 

66005 

66007 

66009 

66011 

66013 

66015 

66017 

66019 

66021 

66022 

66023 

66025 

66027 

66029 

66031 

66033 

66035 

66037 

66039 

66041 

66043 

Ti-NAMITE-A® 

EDP No. 

66002 

66004 

66006 

66008 

66010 

66012 

66014 

66016 

66018 

66020 

66045 

66046 

66024 

66026 

66028 

66030 

66032 

66034 

66036 

66038 

66040 

66042 

66044 

Additional Diameters For Tapping Sizes 

d 1 l 1 l 2 l 3 

mm mm mm mm 

M4* 3,5 49 24 15 

M5* 4,3 54 27 18 

M6* 5,1 57 30 20 

M8 7 74 34 25 

M10* 8,7 76 43 27 

M12* 10,3 84 49 31 

M14* 12,3 94 56 35 

* Please Note drilled hole tolerance h 9 

Ti-NAMITE-A® 

EDP No. 

56238 

56227 

56216 

66024 

56154 

56158 

56163 

72 


Product Group 2

Drills 

Series 103M – DIN 6539 

3 Flute Drill for Drilling of Aluminium and Cast Iron Materials – Series 103 M DIN 6539 

l 1 

d 2 

l 2 

l 3 

Tolerances: 

Ø d 1 d 2 

3-20 h 7 h 7 

Technical 


d 1 

124 

150° 

30° 

3 

HA 

d 1 l 1 l 2 l 3 

mm mm mm mm 

3,0 46 16 12 

3,1 49 18 14 

3,2 49 18 14 

3,3 49 18 14 

3,4 52 20 15 

3,5 52 20 15 

3,6 52 20 15 

3,7 52 20 15 

3,8 55 22 17 

3,9 55 22 17 

4,0 55 22 17 

4,1 55 22 17 

4,2 55 22 17 

4,3 58 24 18 

4,4 58 24 18 

4,5 58 24 18 

4,6 58 24 18 

4,7 58 24 18 

4,8 62 26 20 

4,9 62 26 20 

5,0 62 26 20 

5,1 62 26 20 

5,2 62 26 20 

5,3 62 26 20 

5,4 66 28 21 

5,5 66 28 21 

5,6 66 28 21 

5,7 66 28 21 

5,8 66 28 21 

5,9 66 28 21 

6,0 66 28 21 

6,1 70 31 23 

6,2 70 31 23 

6,3 70 31 23 

6,4 70 31 23 

6,5 70 31 23 

6,6 70 31 23 

6,7 70 31 23 

6,8 74 34 25 

6,9 74 34 25 

7,0 74 34 25 

7,1 74 34 25 

7,2 74 34 25 

7,3 74 34 25 

7,4 74 34 25 

7,5 74 34 25 


Uncoated 

EDP No. 

63000 

63044 

63045 

63001 

63046 

63002 

63047 

63003 

63048 

63049 

63004 

63050 

63005 

63051 

63052 

63006 

63053 

63054 

63055 

63056 

63007 

63057 

63008 

63058 

63059 

63009 

63060 

63061 

63062 

63063 

63010 

63064 

63011 

63065 

63066 

63012 

63067 

63068 

63013 

63069 

63014 

63070 

63015 

63071 

63072 

63016 


d 1 l 1 l 2 l 3 

mm mm mm mm 

7,6 79 37 27 

7,7 79 37 27 

7,8 79 37 27 

7,9 79 37 27 

8,0 79 37 27 

8,1 79 37 27 

8,2 79 37 27 

8,3 79 37 27 

8,4 79 37 27 

8,5 79 37 29 

8,6 84 40 29 

8,7 84 40 29 

8,8 84 40 29 

8,9 84 40 29 

9,0 84 40 29 

9,1 84 40 29 

9,2 84 40 29 

9,3 84 40 29 

9,4 84 40 29 

9,5 84 40 31 

9,6 89 43 31 

9,7 89 43 31 

9,8 89 43 31 

9,9 89 43 31 

10,0 89 43 31 

10,1 89 43 31 

10,2 89 43 31 

10,4 89 43 31 

10,5 89 43 33 

10,7 95 47 33 

10,8 95 47 33 

11,0 95 47 33 

11,5 95 47 35 

12,0 102 51 35 

12,5 102 51 35 

12,8 102 51 35 

13,0 102 51 35 

13,1 102 51 37 

13,5 107 54 37 

14,0 107 54 38 

14,3 111 56 38 

14,5 111 56 38 

15,0 111 56 40 

17,5 123 62 42 

19,5 131 66 42 

20,0 131 66 42 

Uncoated 

EDP No. 

63073 

63074 

63075 

63076 

63017 

63077 

63018 

63078 

63019 

63020 

63021 

63079 

63022 

63080 

63023 

63081 

63024 

63082 

63083 

63025 

63084 

63085 

63086 

63087 

63026 

63088 

63027 

63028 

63029 

63030 

63031 

63032 

63033 

63034 

63035 

63036 

63089 

63037 

63090 

63038 

63039 

63040 

63091 

63041 

63042 

63043 

73 

Drills 

www.sgstool.com

Drills 

Jobber Drill – Series 101M DIN 338 

l 

1 

l 2 

d 1 

d 2 

Tolerances: 

Ø d 1 d 2 

0,7-12 h 8 h 8 

Technical 


118° 

20° 

2 

HA 

124 

Drills 

74 

d 1 l 1 l 2 

mm mm mm 

0,7 31 12 

0,8 31 12 

0,9 35 16 

1,0 34 12 

1,1 36 14 

1,2 38 16 

1,3 38 16 

1,4 40 18 

1,5 40 18 

1,6 43 20 

1,7 46 22 

1,8 46 22 

1,9 46 22 

2,0 49 24 

2,1 49 24 

2,2 53 27 

2,3 53 27 

2,4 57 30 

2,5 57 30 

2,6 57 30 

2,7 61 33 

2,8 61 33 

2,9 61 33 

3,0 61 33 

3,1 65 36 

3,2 65 36 

3,3 65 36 

3,4 70 39 

3,5 70 39 

3,6 70 39 

3,7 70 39 

3,8 75 43 

3,9 75 43 

4,0 75 43 

4,1 75 43 

4,2 75 43 

4,3 80 47 

4,4 80 47 

4,5 80 47 

4,6 80 47 

4,7 80 47 

4,8 86 52 

4,9 86 52 

5,0 86 52 

5,1 86 52 

5,2 86 52 

5,3 86 52 

5,4 93 57 

5,5 93 57 

5,6 93 57 


Uncoated 

EDP No. 

61001 

61003 

61005 

61007 

61052 

61053 

61054 

61055 

61009 

61056 

61057 

61058 

61059 

61011 

61060 

61061 

61062 

61063 

61013 

61064 

61065 

61066 

61067 

61015 

61068 

61069 

61070 

61071 

61017 

61072 

61073 

61074 

61075 

61019 

61076 

61077 

61078 

61079 

61021 

61080 

61081 

61082 

61083 

61023 

61084 

61085 

61086 

61087 

61025 

61088 

Ti-NAMITE-A® 

EDP No. 

68268 

68269 

68270 

68271 

68294 

68295 

68296 

68297 

68272 

68298 

68299 

68300 

68301 

68273 

68302 

68303 

68304 

68305 

68274 

68306 

68307 

68308 

68309 

68275 

68310 

68311 

68312 

68313 

68276 

68314 

68315 

68316 

68317 

68277 

68318 

68319 

68320 

68321 

68278 

68322 

68323 

68324 

68325 

68279 

68326 

68327 

68328 

68329 

68280 

68330 

d 1 l 1 l 2 

mm mm mm 

5,7 93 57 

5,8 93 57 

5,9 93 57 

6,0 93 57 

6,1 101 63 

6,2 101 63 

6,3 101 63 

6,4 101 63 

6,5 101 63 

6,6 101 63 

6,7 101 63 

6,8 109 69 

6,9 109 69 

7,0 109 69 

7,1 109 69 

7,2 109 69 

7,3 109 69 

7,4 109 69 

7,5 109 69 

7,6 117 75 

7,7 117 75 

7,8 117 75 

7,9 117 75 

8,0 117 75 

8,1 117 75 

8,2 117 75 

8,3 117 75 

8,4 117 75 

8,5 117 75 

8,6 125 81 

8,7 125 81 

8,8 125 81 

8,9 125 81 

9,0 125 81 

9,1 125 81 

9,2 125 81 

9,3 125 81 

9,4 125 81 

9,5 125 81 

9,6 133 87 

9,7 133 87 

9,8 133 87 

9,9 133 87 

10,0 133 87 

10,2 133 87 

10,5 133 87 

11,0 142 94 

11,5 142 94 

12,0 151 101 

Uncoated 

EDP No. 

61089 

61090 

61091 

61027 

61092 

61093 

61094 

61095 

61029 

61096 

61097 

61098 

61099 

61031 

61100 

61101 

61102 

61103 

61033 

61104 

61105 

61106 

61107 

61035 

61108 

61109 

61110 

61111 

61037 

61112 

61113 

61114 

61115 

61039 

61116 

61117 

61118 

61119 

61041 

61120 

61121 

61122 

61123 

61043 

61124 

61045 

61047 

61049 

61051 

Ti-NAMITE-A® 

EDP No. 

68331 

68332 

68333 

68281 

68334 

68335 

68336 

68337 

68282 

68338 

68339 

68340 

68341 

68283 

68342 

68343 

68344 

68345 

68284 

68346 

68347 

68348 

68349 

68285 

68350 

68351 

68352 

68353 

68286 

68354 

68355 

68356 

68357 

68287 

68358 

68359 

68360 

68361 

68288 

68362 

68363 

68364 

68365 

68289 

68366 

68290 

68291 

68292 

68293 


Product Group 2

Drills 

Series 301M – Combined Drill and Countersink DIN 333 

l 

Tolerances: 

d 1 

d 2 

Ø d 1 d 2 

0,5 - 2,5 +0,14 /-0 +0/-0,025 

> 2,5-5 +0,18 /-0 +0/0,030 

d 1 d 2 l 

mm mm mm 

0,5 3,15 25 

0,8 3,15 25 

1 3,15 31,5 

1,25 3,15 31,5 

1,6 4 35,5 

2 5 40 

2,5 6,3 45 

3,15 8 50 

4 10 56 

5 12,5 63 

Uncoated 

EDP No. 

67005 

67007 

67009 

67011 

67013 

67015 

67017 

67019 

67021 

67023 

Ti-NAMITE-A® 

EDP No. 

67035 

67037 

67039 

67041 

67043 

67045 

67047 

67049 

67051 

67053 

Drills 

Series 201M – Reamers * 

l 1 

d 

l 2 

Tolerances: 

Ø d 1 d 2 

1 - 6 +0,008 /-0 +0,008 /-0 

> 6 - 10 +0,011 /-0 +0,011 /-0 

d l 1 l 2 Number of 

mm mm mm Teeth 

1 32 6 4 

1,5 38 9,5 4 

2 44 12,7 4 

2,5 50 12,7 4 

3 57 16 4 

3,5 63 19 4 

4 63 19 4 

4,5 70 22 4 

5 75 25 4 

5,5 75 25 4 

6 75 25 4 

7 82 28 6 

8 82 28 6 

9 89 31 6 

10 89 31 6 

Uncoated 

EDP No. 

81001 

81003 

81005 

81007 

81009 

81011 

81013 

81015 

81017 

81019 

81021 

81023 

81025 

81027 

81029 

* Special Sizes available on request - 2/3 weeks delivery 

75 


www.sgstool.com

Burrs 

76 

www.sgstool.com

Burrs 

Burrs 

77 

www.sgstool.com

Burrs 

78 

www.sgstool.com

® 

Burrs 

Product 

Group 

Burrs 

Page 

Fluting styles, technical recommendations 81 

4 HM-Burrs with Ω-Geometry 82 

4 

Burs for the New Millennium 

High Performance for applications including 

Turbines, Cast Parts & Avionics/Jet Engines. 

84 

4 Cylinder Shape Burrs 86 

4 Cylinder Shape Burrs with End Cut 88 

4 Cylinder Shape Burrs with Radius End 90 

4 Ball Shape Burrs 92 

4 0val Shape Burrs 94 

4 Tree Shape Burrs with Radius End 96 

Burrs 

4 Tree Shape Burrs with Pointed End 98 

4 Flame Shape Burrs 100 

4 60° Cone Shape Burrs 102 

4 90° Cone Shape Burrs 103 

4 Taper Shape with Radius End Burrs 104 

4 Cone Shape Burrs 106 

4 Inverted Cone Shape Burrs 107 

79 

www.sgstool.com

Burrs 

80 

www.sgstool.com

Burrs 

Fluting Styles 

Double Cut 

6 

Single Cut 

3 

1 

Non-ferrous 

Very effi cient stock 

removal, creates a small 

swarf. Good fi nish 

General purpose 

fl uting. Produces 

long swarf 

For non ferrous 

materials. Aggressive 

stock removal 

3SP 

Chip Breaker 

Provides breakdown 

in swarf. Better 

control 

4 

Diamond Cut 

For heat treated and 

tough alloys steels. 

Creates a powder like 

swarf. Excellent fi nish 

Coarse Cut 

2 

Provide large fl ute 

area for softer 

ferrous materials 

Fine Cut 

5 

For general use on 

hard materials 

requiring a fi ne fi nish 

Material 

Fluting Styles 

6 3 1 3SP 4 2 5 

Aluminium • 

Brass, Copper, Bronze • • • • 

Carbon Fiber 

• 

Fibreglass 

• 

Cast Iron • • • 

Plastics • • 

Hard Rubber 

• 

Steel > 55 HRC • • • • • 

Steel > 60 HRC • • • • • 

Steel • • • 

Stainless Steel • • • • 

Nickel Alloys • • • • 

Steel, Weldments • • • 

Titanium • • • 

Zinc • • 

Burrs 

Burr Speed Recommendations 

min -1 d 1 = 

100.000 

90.000 

80.000 

70.000 

60.000 

50.000 

40.000 

30.000 


Other Common Materials 

20.000 

15.000 

10.000 

0 

2,5 4,0 6,5 9,0 12,0 18,0 

0,5 3,0 5,0 8,0 10,0 16,0 25,0 

Extra-long burrs with 6mm Shanks over 150mm and 3mm shank burrs over 50mm long 

should be used at reduced speeds. 

Please always wear safety glasses when operating machinery. 

81 

www.sgstool.com

Burrs 

HM-Burrs with Ω-Geometry 

Omega Burs from SGS are deep, aggressive double cut Burrs designed to handle 

your most challenging applications. With a deep, aggressive tooth pattern, 

Omega Burs allow for improved chip control and rapid stock removal in harder 

materials…with minimal chatter. 

Features & Benefits: 

• Enhanced geometry and deep fl ute confi 

guration for increased tooth strength 

• Longer tool life vs. conventional burs 

Maximum stock removal 

• Improved productivity and cost savings 

Special Flute Style for Stainless Steels, Nickel Based Alloys, Titanium Alloys and 

Special Alloys 

Burrs 

Cylinder Shape 

d 1 l 1 l 2 d 2 

Tool No. mm mm mm mm 

SA-3M 9,5 63 19 6 

SA-3ML6 9,5 169 19 6 

SA-5M 12,7 69 25 6 

SA-5ML6 12,7 175 25 6 

SA-5M8 12,7 69 25 8 

Uncoated 

Ti-NAMITE-A® (AlTiN) 

EDP No. 

EDP No. 

20269 20300 

20331 20354 

20270 20301 

20332 20355 

20271 20302 

Cylinder Shape with 

End Cut 

SB-3M 9,5 63 19 6 

SB-5M 12,7 69 25 6 

SB-5M8 12,7 69 25 8 

20272 20303 

20273 20304 

20274 20305 

Cylinder Shape with 

Radius End 

SC-3M 9,5 63 19 6 

SC-3ML6 9,5 169 19 6 

SC-5M 12,7 69 25 6 

SC-5ML6 12,7 175 25 6 

SC-5M8 12,7 69 25 8 

SC-6M8 16,0 69 25 8 

20275 20306 

20333 20356 

20276 20307 

20334 20357 

20277 20308 

20278 20309 

82 

www.sgstool.com

Burrs 

HM-Burrs with Ω-Geometry 

Special Flute Style for Stainless Steels, Nickel Based Alloys, Titanium Alloys and 

Special Alloys 

Ball Shape 

d 1 l 1 l 2 d 2 

Tool No. mm mm mm mm 

SD-3M 9,5 52 8 6 

SD-3ML6 9,5 158 8 6 

SD-5M 12,7 55 11 6 

SD-5ML6 12,7 161 11 6 

SD-5M8 12,7 62 11 8 

Uncoated 


EDP No. 

EDP No. 

20279 20310 

20335 20358 

20280 20311 

20336 20359 

20281 20312 

Oval Shape 

SE-3M 9,5 60 16 6 

SE-3ML6 9,5 166 16 6 

SE-5M 12,7 66 22 6 

SE-5ML6 12,7 172 22 6 

SE-5M8 12,7 69 22 8 

20282 20313 

20337 20360 

20283 20314 

20338 20361 

20284 20315 

Tree Shape with 

Radius End 

SF-3M 9,5 63 19 6 

SF-3ML6 9,5 169 19 6 

SF-5M 12,7 69 25 6 

SF-5ML6 12,7 175 25 6 

SF-5M8 12,7 69 25 8 

SF-6M8 16,0 69 25 8 

20285 20316 

20339 20362 

20286 20317 

20340 20363 

20287 20318 

20288 20319 

Burrs 

Tree Shape with 

Pointed End 

SG-3M 9,5 63 19 6 

SG-3ML6 9,5 169 19 6 

SG-5M 12,7 69 25 6 

SG-5ML6 12,7 175 25 6 

SG-5M8 12,7 69 25 8 

SG-6M8 16,0 69 25 8 

20289 20320 

20341 20364 

20290 20321 

20342 20365 

20291 20322 

20292 20323 

Flame Shape 

SH-5M 12,7 76 32 6 

SH-5ML6 12,7 182 32 6 

SH-5M8 12,7 76 32 8 

20293 20324 

20343 20366 

20294 20325 

Taper Shape with 

Radius End 

SL-3M 9,5 74 27 6 

SL-3ML6 9,5 177 27 6 

SL-4M 12,7 76 28 6 

SL-4ML6 12,7 178 28 6 

SL-4M8 12,7 76 28 8 

20295 20326 

20344 20367 

20296 20327 

20345 20368 

20297 20328 

Cone Shape 

SM-5M 12,7 69 22 6 

SM-5M8 12,7 69 22 8 

20298 20329 

20299 20330 

83 


www.sgstool.com

Burrs 

HM-Burrs with G-Geometry 


® 

Designed specifi cally for High Nickel Alloys, Stainless Steel, Titanium, Inconel, 

Hard-to-machine materials 

Standard 

G-Geometry 

0 2 4 6 

Tool Life 

Burrs 

84 

www.sgstool.com

Burrs 

Carbide Burrs with G specification Geometry 


® 

Designed specifi cally for High Nickel Alloys, Stainless Steel, Titanium, Inconel, 

Hard-to-machine materials 

3mm Shank 


d 1 l 2 l 1 d 2 

Style mm mm mm mm 

SA-43MG D/C 3,0 14,0 38,0 3,0 

SA-51MG D/C 6,3 12,7 45,0 3,0 

SA-51MG D/C E/C 6,3 12,7 45,0 3,0 

Uncoated 

EDP No. 

29200 

29201 

29202 


with End Cut 

SB-43MG D/C 3,0 14,0 38,0 3,0 

29203 


with Radius End 

SC-41MG D/C 2,3 11,0 38,0 3,0 

SC-41MGL2 D/C 2,3 11,0 50,0 3,0 

SC-42MG D/C 3,0 14,0 38,0 3,0 

SC-42MGL2 D/C 3,0 14,0 50,0 3,0 

SC-42MGL3 D/C 3,0 14,0 75,0 3,0 

SC-51MG D/C 6,3 12,7 45,0 3,0 

29204 

29205 

29206 

29207 

29208 

29209 

Burrs 

Ball Shape 

SD-42MG D/C 3,0 2,8 38,0 3,0 

SD-51MG D/C 6,3 5,0 38,0 3,0 

29210 

29224 

Oval Shape 

SE-41MG D/C 3,0 5,5 38,0 3,0 

SE-51MG D/C 6,3 9,5 41,0 3,0 

29225 

29211 

Tree Shape 

with Radius End 

SF-42MG D/C 3,0 12,7 38,0 3,0 

SF-42MGL2 D/C 3,0 12,7 50,0 3,0 

SF-51MG D/C 6,3 12,7 45,0 3,0 

29212 

29213 

29214 

Tree Shape 

with Pointed End 

SG-42MG D/C 3,0 8,0 38,0 3,0 

SG-44MG D/C 3,0 12,7 38,0 3,0 

SG-51MG D/C 6,3 12,7 45,0 3,0 

29215 

29216 

29217 

Flame Shape 

SH-41MG D/C 3,0 6,3 38,0 3,0 

29218 

Cone Shape 

SM-42MG D/C 3,0 11,0 38,0 3,0 

SM-43MG D/C 3,0 16,0 38,0 3,0 

SM-51MG D/C 6,3 12,7 48,0 3,0 

29220 

29221 

29223 

85 


www.sgstool.com

Burrs 

Cylinder Shape Burrs 

l 1 

l 2 

d 1 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SA-41M 1,5 3 6 38 

SA-42M 2,5 3 11 38 

SA-43M 3 3 14 38 

SA-52M 4 3 12,7 38 

SA-53M 5 3 12,7 38 

SA-51M 6,3 3 12,7 50 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

20603 20600 

20628 20625 

20653 20650 

20703 20700 

20728 20725 

20678 20675 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SA-11M 3 6 12 56 

SA-12M 3 6 12,7 60 

SA-13M 4 6 16 50 

SA-14M 5 6 16 50 

SA-1M 6 6 16 50 

SA-1ML 6 6 25 50 

SA-2M 8 6 19 63 

SA-3M 9,5 6 19 63 

SA-3ML 9,5 6 25 69 

SA-3MZ 10 6 20 60 

SA-4M 11 6 25 69 

SA-5MZ 12 6 25 65 

SA-5M* 12,7 6 25 69 

SA-6M* 16 6 25 69 

SA-7M* 19 6 25 69 

SA-9M* 25 6 25 69 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

20403 20400 

20428 20425 

20453 20450 

20478 20475 

20003 20000 

20028 20025 

20053 20050 

20078 20075 

20103 20100 

29101 29100 

20153 20150 

29105 29104 

20178 20175 

20203 20200 

20253 20250 

20353 20350 

86 


*8 mm shaft available as option 

Product Group 4

Burrs 

Long Shank Burrs 3mm - 6mm 

3mm Shank 

d 1 d 2 l 2 l 1 


SA-41ML2 1,5 3 6 50 

SA-41ML3 1,5 3 6 75 

SA-42ML2 2,5 3 11 50 

SA-42ML3 2,5 3 11 75 

SA-43ML2 3 3 14 50 

SA-43ML3 3 3 14 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27103 27100 

27128 27125 

27153 27150 

27178 27175 

27203 27200 

27228 27225 

6mm Shank 

d 1 d 2 l 2 l 1 


SA-1ML6 6 6 12,7 162 

SA-3ML6 9,5 6 19 169 

SA-5ML6* 12,7 6 25 175 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26178 26175 

26203 26200 

26228 26225 

Non-ferrous 6mm 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SA-1MNF 6 6 19 50 

SA-3MNF 9,5 6 19 63 

SA-5MNF* 12,7 6 25 69 

SA-6MNF* 16 6 25 69 

SA-7MNF* 19 6 25 69 

Non-ferrous 

EDP No. 

29000 

29002 

29004 

29006 

29008 



87 

www.sgstool.com

Burrs 

Cylinder Shape Burrs with End Cut 

l 1 

l 2 

d 1 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SB-41M 1,5 3 6 38 

SB-42M 2,5 3 11 38 

SB-ECOM 3 3 38 

SB-43M 3 3 14 38 

SB-51M 6,3 3 4,7 43 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

21453 21450 

21478 21475 

21525 

21503 21500 

21553 21550 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SB-11M 3 6 12 56 

SB-12M 3 6 12,7 60 

SB-13M 4 6 16 50 

SB-14M 5 6 16 50 

SB-1M 6 6 16 50 

SB-1ML 6 6 25 50 

SB-2M 8 6 19 63 

SB-3M 9,5 6 19 63 

SB-3ML 9,5 6 25 69 

SB-3MZ 10 6 20 60 

SB-4M 11 6 25 69 

SB-5MZ 12 6 25 65 

SB-5M* 12,7 6 25 69 

SB-6M* 16 6 25 69 

SB-7M* 19 6 25 69 

SB-9M* 25 6 25 69 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

21253 21250 

21278 21275 

21303 21300 

21328 21325 

20853 20850 

20873 20875 

20903 20900 

20928 20925 

20953 20950 

29109 29108 

21003 21000 

29113 29112 

21028 21025 

21053 21050 

21103 21100 

21203 21200 

88 



Product Group 4

Burrs 

Long Shank Burrs 

3mm Shank 

d 1 d 2 l 2 l 1 


SB-41ML2 1,5 3 6 50 

SB-41ML3 1,5 3 6 75 

SB-42ML2 2,5 3 11 50 

SB-42ML3 2,5 3 11 75 

SB-43ML2 3 3 14 50 

SB-43ML3 3 3 14 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27253 27250 

27278 27275 

27303 27300 

27328 27325 

27353 27350 

27378 27375 


6mm Shank 

d 1 d 2 l 2 l 1 


SB-1MNF 6 6 16 50 

SB-3MNF 9,5 6 19 63 

SB-5MNF* 12,7 6 25 69 

SB-6MNF* 16 6 25 69 

SB-7MNF* 19 6 25 69 

Non-ferrous 

EDP No. 

29012 

29014 

29016 

29018 

29020 

Burrs 



89 

www.sgstool.com

Burrs 

Cylinder Shape Burrs with Radius End 

l 1 

l 2 

d 1 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SC-41M 2,5 3 11 38 

SC-42M 3 3 14 38 

SC-52M 4 3 12,7 38 

SC-53M 5 3 12,7 38 

SC-51M 6,3 3 12,7 50 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

22253 22250 

22278 22275 

22328 22325 

22353 22350 

22303 22300 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SC-11M 3 6 12 56 

SC-12M 3 6 16 60 

SC-13M 4 6 16 50 

SC-14M 5 6 16 50 

SC-1M 6 6 16 50 

SC-1ML 6 6 25 50 

SC-2M 8 6 19 63 

SC-3M 9,5 6 19 63 

SC-3ML 9,5 6 25 69 

SC-3MZ 10 6 20 60 

SC-4M 11 6 25 69 

SC-5MZ 12 6 25 65 

SC-5M* 12,7 6 25 69 

SC-6M* 16 6 25 69 

SC-7M* 19 6 25 69 

SC-9M* 25 6 25 69 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

22053 22050 

22078 22075 

22103 22100 

22128 22125 

21703 21700 

21728 21725 

21753 21750 

21778 21775 

21803 21800 

29117 29116 

21853 21850 

29121 29120 

21878 21875 

21903 21900 

21953 21950 

22003 22000 

90 



Product Group 4

Burrs 


3 mm Shank 

d 1 d 2 l 2 l 1 


SC-42ML2 3 3 14 50 

SC-42ML3 3 3 14 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27453 27450 

27478 27475 

6mm Shank 

d 1 d 2 l 2 l 1 


SC-1ML6 6 6 12,7 162 

SC-3ML6 9,5 6 19 169 

SC-5ML6* 12,7 6 25 175 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26328 26325 

26353 26350 

26378 26375 


6mm Shank 

d 1 d 2 l 2 l 1 


SC-1MNF 6 6 19 50 

SC-3MNF 9,5 6 19 63 

SC-5MNF* 12,7 6 25 69 

SC-7MNF* 19 6 25 69 

Non-ferrous 

EDP No. 

29024 

29026 

29028 

29032 

Burrs 



91 

www.sgstool.com

Burrs 

Ball Shape Burrs 

l 1 

l 2 

d 1 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SD-41M 2,5 3 2,3 38 

SD-42M 3 3 2,5 38 

SD-52M 4 3 3,4 38 

SD-53M 5 3 4,7 38 

SD-51M 6,3 3 5 44 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

22778 22775 

22803 22800 

22840 22837 

22853 22850 

22828 22825 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SD-11M 3 6 2,5 46 

SD-14M 5 6 4 50 

SD-1M 6 6 4,7 50 

SD-2M 8 6 6 50 

SD-3M 9,5 6 8 52 

SD-3MZ 10 6 9 49 

SD-4M 11 6 9,5 54 

SD-5MZ 12 6 10,8 51 

SD-5M* 12,7 6 11 55 

SD-6M* 16 6 14 58 

SD-7M* 19 6 16 62 

SD-9M* 25 6 21 72 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

22728 22725 

22753 22750 

22453 22450 

22478 22475 

22503 22500 

29125 29124 

22528 22525 

29129 29128 

22553 22550 

22578 22575 

22628 22625 

22678 22675 

92 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SD-42ML2 3 3 2,5 50 

SD-42ML3 3 3 2,5 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27553 27550 

27578 27575 

6mm Shank 

d 1 d 2 l 2 l 1 


SD-1ML6 6 6 5 155 

SD-3ML6 9,5 6 8 158 

SD-5ML6* 12,7 6 11 161 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26403 26400 

26428 26425 

26453 26450 


6mm Shank 

d 1 d 2 l 2 l 1 


SD-1MNF 6 6 5 50 

SD-3MNF 9,5 6 8 52 

SD-5MNF* 12,7 6 11 55 

SD-6MNF* 16 6 14 58 

SD-7MNF* 19 6 16 62 

Non-ferrous 

EDP No. 

29036 

29038 

29040 

29042 

29044 

Burrs 



93 

www.sgstool.com

Burrs 

Oval Shape Burrs 

l 

2 

l 

1 

d 1 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SE-41M 3 3 5,5 38 

SE-53M 5 3 7,1 38 

SE-51M 6,3 3 9,5 47 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

23153 23150 

23203 23200 

23178 23175 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SE-1M 6 6 9,5 50 

SE-3M 9,5 6 16 60 

SE-5M* 12,7 6 22 66 

SE-6M* 16 6 25 69 

SE-7M* 19 6 25 69 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

22953 22950 

22978 22975 

23003 23000 

23028 23025 

23078 23075 

94 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SE-41ML2 3 3 5,5 50 

SE-41ML3 3 3 5,5 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27603 27600 

27628 27625 

6mm Shank 

d 1 d 2 l 2 l 1 


SE-1ML6 6 6 9,5 160 

SE-3ML6 9,5 6 16 166 

SE-5ML6* 12,7 6 22 172 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26478 26475 

26503 26500 

26528 26525 


6mm Shank 

Burrs 

d 1 d 2 l 2 l 1 


SE-3MNF 9,5 6 16 60 

SE-5MNF* 12,7 6 22 66 

SE-6MNF* 16 6 25 69 

SE-7MNF* 19 6 25 69 

Non-ferrous 

EDP No. 

29048 

29050 

29052 

29054 



95 

www.sgstool.com

Burrs 

Tree Shape Burrs with Radius End 

l 1 

l 2 

d 2 

d 1 

3mm Shank 

d 1 d 2 l 2 l 1 


SF-41M 3 3 6 38 

SF-42M 3 3 12,7 38 

SF-53M 5 3 12,7 38 

SF-51M 6,3 3 12,7 50 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

23678 23675 

23703 23700 

23753 23750 

23728 23725 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SF-11M 3 6 12,7 56 

SF-1M 6 6 16 50 

SF-3M 9,5 6 19 63 

SF-4M 11 6 25 69 

SF-5MZ 12 6 25 65 

SF-13M* 12,7 6 19 63 

SF-5M* 12,7 6 25 69 

SF-6M* 16 6 25 69 

SF-7M* 19 6 25 69 

SF-14M* 19 6 32 76 

SF-15M* 19 6 38 82 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

23503 23500 

23303 23300 

23328 23325 

23353 23350 

23522 23520 

23528 23525 

23378 23375 

23403 23400 

23453 23450 

23578 23575 

23628 23625 

96 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SF-42ML2 3 3 12,7 50 

SF-42ML3 3 3 12,7 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27653 27650 

27678 27675 

6mm Shank 

d 1 d 2 l 2 l 1 


SF-1ML6 6 6 12,7 163 

SF-3ML6 9,5 6 19 169 

SF-5ML6* 12,7 6 25 175 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26553 26550 

26578 26575 

26603 26600 


6mm Shank 

d 1 d 2 l 2 l 1 


SF-1MNF 6 6 19 50 

SF-3MNF 9,5 6 19 63 

SF-5MNF* 12,7 6 25 69 

SF-6MNF* 16 6 25 69 

SF-14MNF* 19 6 32 76 

Non-ferrous 

EDP No. 

29058 

29060 

29062 

29064 

29066 

Burrs 



97 

www.sgstool.com

Burrs 

Tree Shape Burrs with Pointed End 

l 2 

l 1 

d 2 

d 1 

3mm Shank 

d 1 d 2 l 2 l 1 


SG-41M 3 3 6 38 

SG-43M 3 3 9,5 38 

SG-44M 3 3 12,7 38 

SG-53M 5 3 12,7 38 

SG-51M 6,3 3 12,7 50 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24153 24150 

24203 24200 

24228 24225 

24278 24275 

24253 24250 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SG-1M 6 6 16 50 

SG-2M 8 6 19 63 

SG-3M 9,5 6 19 63 

SG-3MZ 10 6 20 60 

SG-5MZ 12 6 25 65 

SG-13M* 12,7 6 19 63 

SG-5M* 12,7 6 25 69 

SG-6M* 16 6 25 69 

SG-7M* 19 6 25 69 

SG-15M* 19 6 38 82 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

23853 23850 

23878 23875 

23903 23900 

24042 24040 

24046 24045 

24053 24050 

23928 23925 

23953 23950 

24003 24000 

24103 24100 

98 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SG-44ML2 3 3 12,7 50 

SG-44ML3 3 3 12,7 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27853 27850 

27878 27875 

6mm Shank 

d 1 d 2 l 2 l 1 


SG-1ML6 6 6 12,7 163 

SG-3ML6 9,5 6 19 169 

SG-5ML6* 12,7 6 25 175 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26628 26625 

26653 26650 

26678 26675 

Burrs 



99 

www.sgstool.com

Burrs 

Flame Shape Burrs 

l 1 

l 2 

d 2 

d 1 

3mm Shank 

d 1 d 2 l 2 l 1 


SH-41M 3 3 6,3 38 

SH-53M 5 3 9,5 38 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24553 24550 

24603 24600 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SH-2M 8 6 19 63 

SH-5M* 12,7 6 32 76 

SH-6M* 16 6 36 80 

SH-7M* 19 6 41 85 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24403 24400 

24428 24425 

24453 24450 

24503 24500 

100 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SH-41ML2 3 3 6,3 50 

SH-41ML3 3 3 6,3 75 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27903 27900 

27928 27925 

6mm Shank 

d 1 d 2 l 2 l 1 


SH-2ML6 8 6 19 169 

SH-5ML6* 12,7 6 32 182 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26703 26700 

26728 26725 

Burrs 



101 

www.sgstool.com

Burrs 

60° Cone Shape Burrs 

l 1 

l 2 

d 1 d 2 

3mm Shank 

d 1 d 2 l 2 l 1 


SJ-42M 3 3 2,5 38 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24903 24900 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SJ-1M 6 6 4 50 

SJ-3M 9,5 6 8 55 

SJ-5M* 12,7 6 11 58 

SJ-6M* 16 6 14,5 61 

SJ-7M* 19 6 17,5 65 

SJ-9M* 25 6 24,5 68 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24678 24675 

24703 24700 

24728 24725 

24753 24750 

24803 24800 

24853 24850 

102 



Product Group 4

Burrs 

90° Cone Shape Burrs 

l 1 

l 2 

d 2 

d 1 

3mm Shank 

d 1 d 2 l 2 l 1 


SK-42M 3 3 1,5 38 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25153 25150 

6mm Shank 

d 1 d 2 l 2 l 1 


SK-1M 6 6 3 50 

SK-3M 9,5 6 4,7 52 

SK-5M* 12,7 6 6,3 54 

SK-6M* 16 6 8 57 

SK-7M* 19 6 9,5 58 

SK-9M* 25 6 12,7 60 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

24928 24925 

24953 24950 

24978 24975 

25003 25000 

25053 25050 

25103 25100 

Burrs 



103 

www.sgstool.com

Burrs 

Taper Shape with Radius End Burrs 

l 1 

d 1 

a 

l 2 

d 2 

3mm Shank 

d 1 d 2 l 2 l 1 

Style mm mm mm mm a 

SL-41M 3 3 9,5 38 8° 

SL-42M 3 3 12,7 38 8° 

SL-53M 5 3 12,7 38 14° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25403 25400 

25428 25425 

25453 25450 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SL-1M 6 6 16 50 14° 

SL-2M 8 6 22 69 14° 

SL-3M 9,5 6 27 74 14° 

SL-4M* 12,7 6 28 76 14° 

SL-5M* 16 6 30 77 14° 

SL-7M* 19 6 38 85 14° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25178 25175 

25203 25200 

25228 25225 

25253 25250 

25278 25275 

25353 25350 

104 



Product Group 4

Burrs 


3mm Shank 

d 1 d 2 l 2 l 1 


SL-42ML2 3 3 12,7 50 8° 

SL-42ML3 3 3 12,7 75 8° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

27953 27950 

27978 27975 

6mm Shank 

d 1 d 2 l 2 l 1 


SL-1ML6 6 6 16 166 14° 

SL-3ML6 9,5 6 27 177 14° 

SL-4ML6* 12,7 6 28 178 14° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26753 26750 

26778 26775 

26803 26800 


6mm Shank 

Burrs 

d 1 d 2 l 2 l 1 


SL-3MNF 9,5 6 27 74 14° 

SL-4MNF* 12,7 6 28 76 14° 

SL-5MNF* 16 6 30 77 14° 

SL-7MNF* 19 6 38 85 14° 

Non-ferrous 

EDP No. 

29070 

29072 

29074 

29078 



105 

www.sgstool.com

Burrs 

Cone Shape Burrs 

l 1 

l 2 

d 1 d 2 

a 

3mm Shank 

d 1 d 2 l 2 l 1 

Style mm mm mm mm α 

SM-41M 3 3 8,9 38 12° 

SM-42M 3 3 11 38 14° 

SM-43M 3 3 16 38 7° 

SM-53M 5 3 12,7 38 16° 

SM-51M 6,3 3 12,7 54 22° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25678 25675 

25703 25700 

25728 25725 

25778 25775 

25753 25750 

Burrs 

6mm Shank 

d 1 d 2 l 2 l 1 


SM-1M 6 6 12,7 50 22° 

SM-2M 6 6 19 50 14° 

SM-3M 6 6 25 50 10° 

SM-4M 9,5 6 16 63 28° 

SM-5M* 12,7 6 22 69 28° 

SM-6M* 16 6 25 73 31° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25503 25500 

25528 25525 

25553 25550 

25578 25575 

25603 25600 

25628 25625 

Long Shank Burrs 3mm 

3mm Shank 

d 1 d 2 l 2 l 1 


SM-42ML2 3 3 11 50 14° 

SM-42ML3 3 3 11 75 14° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

28053 28050 

28078 28075 

106 



Product Group 4

Burrs 

Inverted Cone Shape Burrs 

l 1 

l 2 

d 2 

d 1 

a 

3mm Shank 

d 1 d 2 l 2 l 1 


SN-41M 2,5 3 3 38 10° 

SN-42M 3 3 4 38 10° 

SN-53M 5 3 6,3 38 10° 

SN-51M 6,3 3 6 44 10° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

26028 26025 

26053 26050 

26103 26100 

26078 26075 

6mm Shank 

d 1 d 2 l 2 l 1 


SN-1M 6 6 8 50 10° 

SN-2M 9,5 6 9,5 53 13° 

SN-4M* 12,7 6 12,7 57 28° 

SN-6M* 16 6 19 63 18° 

SN-7M* 19 6 16 60 30° 

Double Cut 

Single Cut 

EDP No. 

EDP No. 

25853 25850 

25878 25875 

25903 25900 

25928 25925 

25978 25975 

Burrs 



107 

www.sgstool.com

Technical 


108 

www.sgstool.com

Technical 


Technical Recommendations 

109 

www.sgstool.com


Definitions 

v c m/min (Cutting speed ) 

n 

min -1 (Spindle speed) 

d 

mm (Diameter of cutting edge) 

v f 

f z 

z 

a p 

a e 

MRR 

mm/min (Feed rate) 

mm (Feed per fl ute) 

Number of fl utes 

mm (axial cutting depth) 

mm (radial cutting depth) 

cm 3 /min (Metal removal rate) 

π 3,142 

Formula 

Cutting speed (v c ) = 

Spindle speed (n) = 

Feed per flute (f z ) = 

π · d · n 

1.000 

1.000 · v c 

π · d 

v f 

n · z 

Feed rate (v f ) = n · z · f z 

Metal removal rate (MRR) = 

v f · a p · a e 

1.000 

Technical 


Application Tips 

• Always ensure tools have minimal protrusion for improved rigidity 

• Tools with excessive protrusion will effect speed/feeds 

• Check tool run out in holder to ensure optimum tool life 

• Check coolant concentration is correct to material being machined and within your 

health and safety guidelines 

• Climb milling is recommended 

• Try to keep fi xturing as rigid as possible. 

Good strategy /programming will ensure optimum conditions to get the best out of your 

tooling. Please contact us now if you need any application help. 

110 


Speeds & feeds supplied are to be used as a guide only and are based on minimum protrusion of tool in chuck. SGS do not take any responsibility for cost of 

tooling, work piece or any ancillary products in the event of a failure.


Z-Carb - AP 

Profi ling – Radial Width of Cut 0,1 x D 

Material N/mm 2 v c in m/ 

min 

Cutting Diameter (mm) 

ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 20 ø 25 

Feed Rate per Tooth (mm) 

Case Hardening Steel 600 212 0,007 0,012 0,017 0,024 0,041 0,065 0,078 0,085 0,089 0,109 0,109 


Steel Alloys 950 140 0,007 0,012 0,017 0,025 0,041 0,066 0,079 0,084 0,091 0,111 0,109 

Tool Steel 950 70 0,007 0,012 0,018 0,026 0,043 0,067 0,081 0,088 0,094 0,112 0,115 

Gray Cast Iron (Gray) 650 183 0,007 0,012 0,018 0,025 0,042 0,067 0,080 0,088 0,091 0,113 0,115 

Gray Cast Iron (Ductile) 1050 93 0,007 0,012 0,018 0,025 0,043 0,065 0,078 0,084 0,091 0,111 0,110 

Cast Iron (Malleable) 1050 58 0,007 0,013 0,018 0,026 0,042 0,069 0,083 0,089 0,093 0,114 0,108 

Stainless Steel (300 Series) 950 108 0,007 0,012 0,018 0,025 0,038 0,048 0,057 0,067 0,072 0,086 0,089 


Stainless Steel (PH Series) 1150 90 0,006 0,012 0,017 0,026 0,041 0,052 0,062 0,072 0,082 0,086 0,086 

Titanium Alloys 1000 104 0,008 0,014 0,020 0,028 0,042 0,052 0,063 0,073 0,084 0,094 0,095 

High Temp. Alloys 1050 30 0,006 0,012 0,018 0,022 0,035 0,044 0,052 0,062 0,070 0,077 0,083 

0,1 x D 

max. 

1,5 x D 


Material N/mm 2 v c in 

m/min 


ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 20 ø 25 




Steel Alloys 950 131 0,006 0,010 0,014 0,019 0,033 0,052 0,063 0,066 0,072 0,087 0,087 

Tool Steel 950 64 0,006 0,010 0,014 0,020 0,033 0,053 0,063 0,068 0,073 0,088 0,090 









0,4 x D 

max. 

1,5 x D 

Slotting 

Technical 



m/min 


ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 20 ø 25 




Steel Alloys 950 113 0,005 0,009 0,013 0,019 0,032 0,050 0,061 0,064 0,070 0,084 0,084 

Tool Steel 950 58 0,005 0,009 0,014 0,019 0,032 0,051 0,061 0,066 0,070 0,084 0,086 









max. 

1,0 x D 


tooling, work piece or any ancillary products in the event of a failure. 

111 

www.sgstool.com


Z-Carb - AP Long Reach 


Material N/mm 2 v c in m/ 

min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Case Hardening Steel 600 170 0,016 0,031 0,045 0,055 0,062 0,076 


Steel Alloys 950 116 0,016 0,031 0,045 0,055 0,062 0,076 

Tool Steel 950 60 0,016 0,031 0,045 0,055 0,062 0,076 

Gray Cast Iron (Gray) 650 135 0,016 0,031 0,045 0,055 0,062 0,076 

Gray Cast Iron (Ductile) 1050 80 0,016 0,031 0,045 0,055 0,062 0,076 

Cast Iron (Malleable) 1050 50 0,016 0,031 0,045 0,055 0,062 0,076 

Stainless Steel (300 Series) 950 100 0,017 0,026 0,032 0,040 0,052 0,061 


Stainless Steel (PH Series) 1150 83 0,017 0,017 0,034 0,041 0,055 0,057 

Titanium Alloys 1000 85 0,018 0,030 0,036 0,044 0,057 0,065 

High Temp. Alloys 1050 23 0,012 0,024 0,029 0,035 0,046 0,062 

0,1 x D 

max. 

1 x D 



m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 




Steel Alloys 950 107 0,013 0,025 0,036 0,044 0,050 0,061 

Tool Steel 950 55 0,013 0,025 0,036 0,044 0,050 0,061 









0,4 x D 

max. 

1 x D 

Technical 


Slotting 


m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 




Steel Alloys 950 92 0,012 0,023 0,036 0,040 0,046 0,056 

Tool Steel 950 48 0,012 0,023 0,036 0,040 0,046 0,056 









max. 

0,5 x D 

112 





Z-Carb | Z-Carb - JetStream 

Profi ling 


m/min 


ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 18 ø 20 ø 25 


Case Hardening Steel ~600 155 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 


Steel Alloys ~950 107 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Tool Steel ~950 55 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Gray Cast Iron (Gray) ~680 145 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Gray Cast Iron (Ductile) ~1050 73 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Cast Iron (Malleable) ~1050 46 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Stainless Steel (300 Series) ~950 91 0,0045 0,0085 0,0128 0,0185 0,028 0,035 0,042 0,049 0,056 0,059 0,066 0,082 


Stainless Steel (PH Series) ~1150 76 0,0039 0,0085 0,013 0,0186 0,029 0,0367 0,044 0,051 0,059 0,059 0,062 0,078 

Titanium Alloys ~1050 92 0,0058 0,008 0,015 0,0207 0,031 0,039 0,047 0,054 0,062 0,062 0,069 0,086 

High Temp. Alloys ~1050 25 0,005 0,008 0,0117 0,0141 0,025 0,0315 0,038 0,044 0,050 0,056 0,063 0,069 

max. 

1,5 x D 

0,5 x D 

Slotting 


m/min 


ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 18 ø 20 ø 25 




Steel Alloys ~950 107 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Tool Steel ~950 55 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Gray Cast Iron (Gray) ~680 145 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Gray Cast Iron (Ductile) ~1050 73 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 

Cast Iron (Malleable) ~1050 46 0,005 0,0085 0,0127 0,0178 0,031 0,048 0,058 0,063 0,066 0,074 0,081 0,080 



Stainless Steel (PH Series) ~1150 76 0,0039 0,0085 0,013 0,0186 0,029 0,0367 0,044 0,051 0,059 0,059 0,062 0,078 

Titanium Alloys ~1050 80 0,0058 0,008 0,015 0,0207 0,031 0,039 0,047 0,054 0,062 0,062 0,069 0,086 

High Temp. Alloys ~1050 25 0,005 0,008 0,0117 0,0141 0,025 0,0315 0,038 0,044 0,050 0,056 0,063 0,069 

Technical 


max. 

1,0 x D 

Z-Carb HTA Stub 

Profi ling 


m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Case Hardening Steel ~600 155 0,018 0,030 0,048 0,058 0,063 0,074 

Case Hardening Steel ~900 128 0,018 0,030 0,048 0,058 0,063 0,074 

Steel Alloys ~950 107 0,019 0,030 0,048 0,058 0,061 0,074 

Tool Steel ~950 55 0,018 0,030 0,048 0,058 0,063 0,073 

Gray Cast Iron (Gray) ~650 145 0,018 0,030 0,048 0,058 0,063 0,074 

Gray Cast Iron (Ductile) ~1050 73 0,018 0,030 0,048 0,058 0,063 0,074 

Cast Iron (Malleable) ~1050 46 0,018 0,030 0,048 0,058 0,063 0,074 

Stainless Steel (300 Series) ~950 91 0,018 0,028 0,035 0,042 0,049 0,059 

Stainless Steel (400 Series) ~600 128 0,021 0,031 0,039 0,047 0,055 0,062 

Stainless Steel (PH Series) ~1150 76 0,019 0,029 0,037 0,044 0,051 0,056 

Titanium Alloys ~1000 91 0,021 0,031 0,039 0,047 0,055 0,063 

High Temp. Alloys ~1050 24 0,014 0,026 0,032 0,039 0,045 0,058 



0,5 x D 

max. 

1 x D 

113 

www.sgstool.com


Z-Carb – HTA 

Inconel / Waspaloy / Hastelloy / Rene / 

Stellite / 1.4944 / 2.4983 

N/mm 2 

v c in m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Contouring – Semi-Rough < 1000 40 0,029 0,039 0,049 0,060 0,080 0,098 

Contouring – Roughing < 1000 35 0,023 0,031 0,039 0,048 0,064 0,077 

Slotting < 1000 30 0,017 0,023 0,030 0,037 0,049 0,058 

Contouring – Semi-Rough > 1000 35 0,023 0,031 0,040 0,048 0,065 0,078 

Contouring – Roughing > 1000 30 0,016 0,021 0,027 0,034 0,045 0,053 

Slotting > 1000 25 0,011 0,015 0,019 0,025 0,033 0,037 

Contouring – Semi-Rough Contouring – Roughing Slotting 

max. 

1,5 x D 

max. 

1,5 x D 

max. 

1,0 x D 

0,25 x D 

0,5 x D 

Z-Carb – MD 

Slotting 

Cutting Depth 

max. 

0,5 x D 

max. 

0,5 x D 

max. 

0,5 x D 

Hardness 

HRC 

v c in m/min 


ø 3 ø 5 ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


< 45 65 0,02 0,02 0,03 0,04 0,05 0,06 0,08 0,1 

45 - 55 40 0,01 0,02 0,03 0,03 0,04 0,05 0,06 0,08 

> 60 25 0,01 0,02 0,02 0,02 0,03 0,04 0,05 0,06 

Contouring 

Technical 


Cutting Depth 

Hardness 

HRC 

v c in m/min 


ø 3 ø 5 ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


max. 

1 x D < 45 80 0,02 0,03 0,05 0,06 0,07 0,09 0,11 0,13 

0,5 x D 

max. 

1 x D 45 - 55 45 0,02 0,03 0,04 0,05 0,05 0,07 0,09 0,11 

0,5 x D 

max. 

0,5 x D > 60 30 0,01 0,02 0,03 0,03 0,04 0,05 0,07 0,08 

0,3 x D 

HSC Machining 

114 


Cutting Depth 

Hardness 

HRC 

v c in m/min 


ø 3 ø 5 ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


max. 

0,1 x D < 45 170 0,03 0,04 0,06 0,07 0,08 0,11 0,14 0,17 

0,1 x D 

max. 

0,1 x D 45 - 55 150 0,02 0,03 0,05 0,06 0,07 0,09 0,11 0,13 

0,1 x D 

max. 

0,1 x D > 60 75 0,02 0,02 0,03 0,04 0,05 0,06 0,08 0,1 

0,1 x D 




Series 61M 


Material 

v c in m/min ø 6 ø 10 ø 12 ø 16 ø 20 ø 25 


Machining Steel 160 0,04 - 0,06 0,05 - 0,07 0,05 - 0,07 0,07 - 0,09 0,08- 0,1 0,09 - 0,15 

Structural Steel 150 0,04 - 0,06 0,05 - 0,07 0,05 - 0,07 0,07 - 0,09 0,08- 0,09 0,09 - 0,13 

Gray Cast Iron 120 0,025 - 0,04 0,04 - 0,05 0,05 - 0,09 0,06 - 0,11 0,08 - 0,13 0,01 - 0,18 

Series 62M 


Material 



Case Hardening Steel 125 0,04 - 0,06 0,04 - 0,05 0,055 - 0,065 0,055 - 0,075 0,065 - 0,075 0,075 - 0,11 

Tool Steel 90 0,02 - 0,035 0,03 - 0,04 0,04 - 0,05 0,05 - 0,065 0,05 - 0,07 0,065 - 0,08 

High Temp. Alloys 80 0,02 - 0,025 0,03 - 0,04 0,04 - 0,05 0,05 - 0,065 0,045 - 0,07 0,065 - 0,08 

Stainless Steel 80 0,02 - 0,03 0,03 - 0,05 0,04 - 0,065 0,05 - 0,075 0,065 - 0,085 0,07 - 0,09 

Inconel 25 0,025 - 0,04 0,04 - 0,05 0,04 - 0,065 0,05 - 0,065 0,06 - 0,075 0,07 - 0,1 

Titanium 50 0,025 - 0,04 0,04 - 0,05 0,04 - 0,075 0,06 - 0,075 0,065 - 0,1 0,08 - 0,13 

Series 63M 


Material 



Aluminium 290 - 650 0,025 - 0,04 0,03- 0,05 0,045 - 0,09 0,063 - 0,11 0,08 - 0,15 0,1 - 0,2 

V-Carb 


m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 




Steel Alloys 950 150 0,025 0,033 0,042 0,050 0,067 0,084 

Tool Steel 950 140 0,024 0,033 0,041 0,049 0,065 0,081 

Gray Cast Iron (ductile) 650 120 0,033 0,043 0,054 0,065 0,087 0,109 

Gray Cast Iron (malleable) 1050 100 0,023 0,030 0,038 0,046 0,061 0,076 






Technical 


Correction Factor Finishing Cutting Depth Radial Cutting Depth Axial Factor for v c Factor for f z 

Stub* 0,05 x D l 2 1 1 

Reg 0,05 x D l 2 1 1 

Long 0,02 x D 3 x D 1 1 

Correction Factor Semi-Finishing Cutting Depth Radial Cutting Depth Axial Factor for v c Factor for f z 

Stub* 0,1 x D l 2 0,8 1,2 

Reg 0,1 x D l 2 0,8 1,2 

Long 0,05 x D 3 x D 1 1 

Correction Factor Roughing Cutting Depth Radial Cutting Depth Axial Factor for v c Factor for f z 

Stub* 0,5 x D 1,25 x D 0,6 0,35 

Reg 0,5 x D 1 x D 0,6 0,35 

Correction Factor Slotting Cutting Depth Radial Cutting Depth Axial Factor for v c Factor for f z 

Stub* 1 x D 0,7 x D 0,5 0,3 

Reg 1 x D 0,5 x D 0,5 0,3 

* up to Ø 12 mm available 



115 

www.sgstool.com


Series 7M 

Contouring 


Material N/mm 2 v c in m/min ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 18 ø 20 ø 25 


Case Hardening Steel 600 168 0,013 0,017 0,023 0,029 0,039 0,049 0,058 0,068 0,078 0,088 0,097 0,107 

Case Hardening Steel 900 146 0,010 0,014 0,019 0,025 0,034 0,042 0,051 0,059 0,067 0,076 0,084 0,085 

Steel Alloys 950 122 0,010 0,014 0,019 0,025 0,033 0,041 0,049 0,057 0,065 0,073 0,082 0,094 

Tool Steel 950 110 0,009 0,012 0,019 0,025 0,033 0,042 0,050 0,059 0,067 0,075 0,084 0,091 

Gray Cast Iron (ductile) 650 94 0,015 0,019 0,026 0,033 0,044 0,055 0,066 0,077 0,088 0,088 0,098 0,106 

Gray Cast Iron (malleable) 1050 84 0,009 0,012 0,018 0,023 0,031 0,038 0,046 0,054 0,061 0,069 0,077 0,077 

Cast Iron (Malleable) 1050 52 0,008 0,011 0,017 0,023 0,030 0,038 0,046 0,053 0,061 0,068 0,076 0,068 

Stainless Steel (300 Series) 950 85 0,007 0,009 0,016 0,023 0,030 0,038 0,045 0,053 0,060 0,068 0,075 0,076 

Stainless Steel (400 Series) 600 122 0,010 0,013 0,021 0,029 0,039 0,049 0,059 0,069 0,078 0,088 0,098 0,106 

Stainless Steel (PH Series) 1150 73 0,006 0,008 0,014 0,021 0,028 0,035 0,043 0,050 0,057 0,064 0,071 0,069 

Titanium Alloys 1000 91 0,011 0,014 0,022 0,030 0,040 0,050 0,060 0,070 0,080 0,090 0,100 0,110 

High Temp. Alloys 1050 24 0,010 0,013 0,021 0,029 0,039 0,048 0,058 0,067 0,077 0,087 0,096 0,101 

max. 

Flute length 

0,02 x D 

Power-Carb TM - Series 57M 

Slotting 


Hardness 



30 - 45 HRc 65 0,035 0,04 0,05 0,055 0,07 0,085 

45 - 55 HRc 45 0,025 0,03 0,04 0,045 0,06 0,073 

55 - 60 HRc 30 0,02 0,025 0,028 0,032 0,04 0,05 

60 - 65 HRc 20 0,02 0,025 0,028 0,032 0,04 0,05 

max. 

0,3 x D 

Technical 


Contouring 


Hardness 



30 - 45 HRc 65 0,05 0,06 0,08 0,1 0,13 0,18 

45 - 55 HRc 45 0,03 0,04 0,05 0,06 0,09 0,13 

55 - 60 HRc 30 0,025 0,028 0,03 0,035 0,055 0,09 

60 - 65 HRc 20 0,025 0,028 0,03 0,035 0,055 0,09 

0,2 x D 

max. 

1,5 x D 

HSC Machining 


Hardness 



30 - 45 HRc 350 0,08 0,08 0,12 0,12 0,16 0,2 

45 - 55 HRc 320 0,08 0,08 0,1 0,1 0,13 0,16 

55 - 60 HRc 160 0,06 0,06 0,08 0,08 0,11 0,13 

60 - 65 HRc 75 0,05 0,05 0,08 0,08 0,11 0,13 0,05 x D 

max. 

1,5 x D 

116 





Turbo-Carb® 

Roughing - Cutting Depth: 0,5 x D 

ø 

mm 

v c 

m/min 

30 HRc - 45 HRc 

rpm 

min -1 

f z 

mm 

1 80 25.465 0,004 

1,5 60 12.732 0,006 

2 60 9.549 0,0085 

2,5 60 7.639 0,013 

3 60 6.366 0,017 

4 60 4.775 0,024 

5 60 3.820 0,03 

6 60 3.183 0,04 

8 60 2.387 0,056 

10 60 1.910 0,065 

12 60 1.592 0,071 

16 60 1.194 0,075 

20 60 955 0,08 

v c 

m/min 

45 HRc - 55 HRc 

rpm 

min -1 

f z 

mm 

45 14.324 0,004 

45 9.549 0,006 

45 7.162 0,0085 

45 5.730 0,013 

45 4.775 0,017 

45 3.581 0,024 

45 2.865 0,03 

45 2.387 0,04 

45 1.790 0,056 

45 1.432 0,065 

45 1.194 0,071 

45 895 0,075 

45 716 0,08 

max. 

0,4 x D 

0,4 x D 

Finishing - Cutting Depth: 0,075 x D 

ø 

mm 

v c 

m/min 

30 HRc - 45 HRc 

rpm 

min -1 

f z 

mm 

1 300 95.493 0,016 

1,5 300 63.662 0,018 

2 300 47.746 0,02 

2,5 300 38.197 0,025 

3 300 31.831 0,03 

4 300 23.873 0,035 

5 300 19.099 0,045 

6 300 15.915 0,054 

8 300 11.937 0,1 

10 300 9.549 0,125 

12 300 7.958 0,153 

16 300 5.968 0,25 

20 300 4.775 0,28 

v c 

m/min 

45 HRc - 55 HRc 

rpm 

min -1 

f z 

mm 

200 63.662 0,016 

200 42.441 0,018 

200 31.831 0,02 

200 25.465 0,025 

200 21.221 0,03 

200 15.915 0,035 

200 12.732 0,045 

200 10.610 0,054 

200 7.958 0,1 

200 6.366 0,125 

200 5.305 0,153 

200 3.979 0,25 

200 3.183 0,28 

v c 

m/min 

55 HRc - 60 HRc 

rpm 

min -1 

f z 

mm 

120 38.197 0,016 

120 25.465 0,018 

120 19.099 0,02 

120 15.279 0,025 

120 12.732 0,03 

120 9.549 0,035 

120 7.639 0,045 

120 6.366 0,054 

120 4.775 0,1 

120 3.820 0,125 

120 3.183 0,153 

120 2.387 0,25 

120 1.910 0,28 

If the speed recommendation exceeds your machine limit, please use the maximum you have available 

Technical 


max. 

0,05 x D 

0,05 x D 

Speed-Carb 

HSC Machining 


Hardness 

v c in m/min ø 3 - 4 ø 5 - 6 ø 8 - 10 ø 12 ø 16 ø 20 


30 - 45 HRc 300 0,08 - 0,012 0,12 - 0,2 0,2 - 0,25 0,2 - 0,35 0,3 - 0,45 0,35 - 0,5 

45 - 55 HRc 220 0,04 - 0,07 0,07 - 0,12 0,08 - 0,15 0,1 - 0,18 0,12 - 0,2 0,15 - 0,3 

55 - 65 HRc 180 0,03 - 0,05 0,05 - 0,1 0,1 - 0,13 0,1 - 0,15 0,12 - 0,18 0,15 - 0,25 

max. 

0,2 x D 

0,2 x D 



117 

www.sgstool.com


Tri-Carb® - Series 65M 


Material 

v c in m/min ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Stainless Steel < 300 HB 90 0,007 0,010 0,013 0,018 0,025 0,033 0,043 0,055 0,064 

Alloy Steel < 275 HB 105 0,010 0,015 0,023 0,030 0,031 0,045 0,058 0,066 0,073 

Titanium < 295 HB 90 0,007 0,010 0,013 0,023 0,030 0,038 0,048 0,060 0,066 

Inconel < 300 HB 25 0,005 0,007 0,010 0,018 0,025 0,030 0,040 0,050 0,060 

Contouring 

Slotting 

max. 

1 x D 

max. 

0,5 x D 

0,5 x D 

Series 60M 


Material 

v c in m/min ø 3 - 6 ø 8 - 12 ø 12 - 20 


Stainless Steel < 900 N/mm 2 135 0,013 - 0,03 0,025 - 0,05 0,045- 0,13 

Stainless Steel > 900 N/mm 2 110 0,013 - 0,03 0,025 - 0,05 0,045- 0,13 

Titanium, Titanium Alloys 50 0,005 - 0,015 0,013 - 0,025 0,02 - 0,1 

Nickel Alloys 30 0,005 - 0,02 0,02 - 0,025 0,02 - 0,05 

Contouring 

0,25 x D 

max. 

1,5 x D 

Technical 


S-Carb - Stub & Regular Length 


Material v c in m/min ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 20 ø 25 


Aluminium 550 0,040 0,050 0,060 0,070 0,100 0,120 0,15 0,17 0,18 0,22 0,25 

Plastic 430 0,080 0,100 0,120 0,140 0,200 0,240 0,30 0,34 0,36 0,44 0,46 

Copper 300 0,040 0,050 0,060 0,070 0,100 0,120 0,15 0,17 0,18 0,22 0,25 

Brass 350 0,040 0,050 0,060 0,070 0,100 0,120 0,15 0,17 0,18 0,22 0,25 

Feed Rates are shown for slotting. Rates shown can be increased by 40 % when profile milling. 

Contouring 

Slotting 

≤1,5 x D ≤1,0 x D 

S-Carb - Long Reach 

Contouring-3D Scanning 

Material v c in m/min 


ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish 

Aluminium 610 0,06 0,10 0,1 0,13 0,12 0,15 0,15 0,18 0,18 0,20 0,25 0,30 

Plastic 400 0,05 0,065 0,05 0,08 0,07 0,10 0,09 0,12 0,12 0,15 0,17 0,20 

Copper 300 0,05 0,065 0,05 0,08 0,07 0,10 0,09 0,12 0,12 0,15 0,17 0,20 

Finish 

≤0,5 x D 

Rough 

max. 

0,05x D 

max. 

0,3 x D 

118 


0,04 x D 


0,3 x D 




S-Carb - Long Reach (Continued) 

Profi ling 



ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish 

Aluminium 610 0,05 0,07 0,08 0,09 0,10 0,12 0,12 0,14 0,16 0,18 0,215 0,25 

Plastic 400 0,035 0,05 0,05 0,07 0,07 0,08 0,08 0,10 0,10 0,11 0,14 0,17 

Copper 300 0,035 0,05 0,05 0,07 0,07 0,08 0,08 0,10 0,10 0,11 0,14 0,17 

Finish 

Rough 

max. 

0,8x D 

max. 

1 x D 

0,05 x D 

0,5 x D 

Slotting 



ø 6 ø 8 ø 10 ø 12 ø 16 ø 20 


Rough Rough Rough Rough Rough Rough 

Aluminium 610 0,04 0,065 0,09 0,11 0,14 0,18 

Plastic 400 0,025 0,04 0,05 0,08 0,09 0,11 

Copper 300 0,025 0,04 0,05 0,08 0,09 0,11 

Rough 

max. 

1 x D 

S-Carb APR 

Slotting 


Material v c in m/min ø 12 ø 16 ø 20 ø 25 


Aluminium up to 2.500 0,08 0,11 0,15 0,18 

Technical 


S-Carb APF 

Profi ling 

max. 

1 x D 

Balancing can improve results at ultra high speeds 

High pressure coolant (50/70bar) important for swarf removal at high speed/feed 


Material v c in m/min ø 12 ø 16 ø 20 ø 25 


Aluminium up to 2.500 0,07 0,1 0,14 0,17 

Length up to 2,5 x D 

Length up to 4 x D 

max. 

2,5 x D 

max. 

4 x D 


Ski-Carb 


Material v c in m/min ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 18 ø 20 


Aluminium 490-610 0,04 0,05 0,06 0,07 0,10 0,12 0,15 0,17 0,18 0,20 0,22 

Plastic 365-490 0,08 0,10 0,12 0,14 0,20 0,24 0,30 0,34 0,36 0,40 0,44 

Copper 245-365 0,04 0,05 0,06 0,07 0,10 0,12 0,15 0,17 0,18 0,20 0,22 

Bronze 245-455 0,04 0,05 0,06 0,07 0,10 0,12 0,15 0,17 0,18 0,20 0,22 

Shear-Carb - Series 52M / Series 54M 

Contouring 

0,5 x D 

Slotting 

max. 

1 x D 

Contouring 

max. 

0,5 x D 

Technical 


120 



Material v c in m/min ø 3 ø 4 ø 5 ø 6 ø 8 ø 10 ø 12 ø 14 ø 16 ø 20 


Aluminium 400 0,030 0,040 0,045 0,060 0,075 0,090 0,12 0,135 0,15 0,19 

Plastic 300 0,040 0,050 0,060 0,070 0,095 0,115 0,15 0,175 0,2 0,23 

Copper 150 0,020 0,025 0,030 0,040 0,050 0,060 0,075 0,09 0,1 0,11 

Brass 150 0,020 0,025 0,030 0,040 0,050 0,060 0,075 0,09 0,1 0,11 

Series 21M / 22M 


Material v c in m/min ø 3 - 6 ø 6 - 12 


Hardwood 400 0,025 - 0,06 0,05 - 0,12 

Softwood 600 0,035 - 0,08 0,07 - 0,14 

Plywood 600 0.03 - 0,09 0,075 - 0,21 

Aluminium 350 0,015 - 0,04 0,03 - 0,1 

Plastic 600 0,01 - 0,065 0,05 - 0,13 

FGR 

Material: 

GFK/CFK 

Slotting 

Serie 52M only 


ø 1,6 ø 2,4 ø 3 ø 4 ø 6 ø 10 ø 12 

Style 

1M 1-1M 2M 3M / 4M 5M / 6M / 6-1M 8M 9M 

rpm (min -1 ) 40.000 - 45.000 25.000 - 30.000 20.000 - 25.000 20.000 - 24.000 20.000 - 24.000 15.000 - 20.000 10.000 - 15.000 

Feed (mm/min) 1.000 - 1.500 1.100 - 1.800 1.100 - 1.800 900 - 1.700 900 - 1.700 700 - 1.500 500 - 1.300 

Series 20M-CCR 

Standard fl ute - ideal for trim operation and moderate roughing – fl ood coolant conditions 

Material: 


GFK/CFK 

ø 6 ø 8 ø 10 ø 12 

rpm (min -1 ) 15.000 - 20.000 12.000 - 18.000 9.500 - 14.500 7.900 - 12.000 

Feed (mm/min) 2.300 - 3.000 2.300 - 3.000 2.300 - 3.000 2.300 - 3.000 

Standard fl ute - ideal for trim operation and moderate roughing – dry conditions 

Material: 


GFK/CFK 

ø 6 ø 8 ø 10 ø 12 

rpm (min -1 ) 5.600 - 9.500 4.200 - 7.200 3.400 - 5.700 2.900 - 4.800 

Feed (mm/min) 750 - 1.500 750 - 1.500 750 - 1.500 750 - 1.500 

Deep fl ute - ideal for heavy roughing – fl ood coolant conditions 

Material: 


GFK/CFK 

ø 6 ø 8 ø 10 ø 12 

rpm (min -1 ) 22.500 - 26.000 17.000 - 24.000 13.500 - 20.000 11.250 - 16.500 

Feed (mm/min) 2.000 - 3.000 2.000 - 3.000 2.000 - 3.000 2.000 - 3.000 

Deep fl ute - ideal for heavy roughing – dry conditions 

Material: 


GFK/CFK 

ø 6 ø 8 ø 10 ø 12 

rpm (min -1 ) 9.000 - 13.000 6.800 - 10.000 5.400 - 8.000 4.500 - 6.600 

Feed (mm/min) 1.400 - 2000 1.400 - 2000 1.400 - 2000 1.400 - 2000 



0,5 x D 

max. 

1,5 x D 

max. 

1,0 x D


General Purpose Carbide Endmills 

Material 

v c in m/min 


ø 1 - 6 ø 6 - 12 ø 12 - 25 


Material 

Number 

Description 


< 500 N/mm 2 150 0,015 - 0,035 0,025 - 0,075 0,07 - 0,18 1.0037 St 37-2 

< 650 N/mm 2 125 0,015 - 0,035 0,025 - 0,075 0,06 - 0,1 1.0050 St 50-2 

< 850 N/mm 2 90 0,015 - 0,025 0,025 - 0,055 0,055 - 0,08 1.0070 St 70-2 

Case Hardening Steel 

< 800 N/mm 2 100 0,025 - 0,035 0,035 - 0,08 0,08 - 0,18 1.0301 C 10 

< 1000 N/mm 2 80 0,015 - 0,025 0,025 - 0,06 0,06 - 0,08 17012 13 Cr 2 

Nitriding Steel 

< 1000 N/mm 2 90 0,015 - 0,025 0,025 - 0,06 0,06 - 0,08 1.8509 41 CrAlMo 7 

< 1300 N/mm 2 70 0,01 - 0,02 0,025 - 0,05 0,035 - 0,06 1.8519 31 CrMoV 9 

Heat Treatable Steel 

< 700 N/mm 2 80 0,015 - 0,04 0,025 - 0,085 0,055 - 0,17 1.0406 C 25 

< 900 N/mm 2 60 0,015 - 0,035 0,025 - 0,065 0,055 - 0,12 1.0540 C 50 

< 1200 N/mm 2 50 0,01 - 0,025 0,025 - 0,035 0,035 - 0,1 1.5122 37 MnSi 4 

< 1400 N/mm 2 35 0,01 - 0,015 0,015 - 0,03 0,035 - 0,06 1.6582 34 CrNiMo 6 

Tool Steel 

< 800 N/mm 2 90 0,025 - 0,032 0,055 - 0,065 0,1 - 0,15 

< 1000 N/mm 2 70 0,015 - 0,025 0,035 - 0,055 0,055 - 0,1 

< 1200 N/mm 2 60 0,01 - 0,02 0,025 - 0,035 0,035 - 0,1 

< 1400 N/mm 2 45 0,01 - 0,015 0,025 - 0,035 0,025 - 0,1 

> 1400 N/mm 2 30 0,005 - 0,015 0,02 - 0,03 0,02 - 0,08 


< 700 N/mm 2 80 0,01 - 0,015 0,025 - 0,04 0,035 - 0,08 1.4301 X 5 CrNi 18 10 

< 850 N/mm 2 60 0,01 - 0,015 0,02 - 0,03 0,025 - 0,065 1.4006 X 10 Cr 13 

< 950 N/mm 2 40 0,005 - 0,015 0,01 - 0,025 0,02 - 0,05 1.4122 X 35 CrMo 17 

Cast Steel 

< 500 N/mm 2 110 0,015 - 0,025 0,03 - 0,05 0,08 - 0,15 1.0446 GS-38 

< 650 N/mm 2 80 0,01 - 0,02 0,015 - 0,035 0,08 - 0,1 1.0553 GS-60 

> 650 N/mm 2 60 0,005 - 0,015 0,015 - 0,03 0,05 - 0,08 1.0554 GS-70 

High Temp. Alloys 

< 700 N/mm 2 35 0,015 - 0,025 0,025 - 0,03 0,04 - 0,05 2.4816 NiCr 15 Fe 

< 900 N/mm 2 20 0,01 - 0,015 0,02 - 0,025 0,035 - 0,045 1.4921 X 20 CrMoV 12 1 

< 1100 N/mm 2 18 0,01 - 0,015 0,02 - 0,025 0,035 - 0,045 1.4911 X 8 CrCoNiMo 10 6 

< 1250 N/mm 2 18 0,01 - 0,015 0,015 - 0,02 0,03 - 0,04 1.4980 X 5 NiCrTi 26 15 

< 1400 N/mm 2 12 0,01 - 0,015 0,015 - 0,02 0,02 - 0,035 2.4973 NiCr 19 CoMo 

> 1400 N/mm 2 8 0,005 - 0,01 0,01 - 0,018 0,01 - 0,03 2.4969 NiCr 20 Co 18 Ti 


< 550 N/mm 2 100 0,01 - 0,02 0,02 - 0,05 0,05 - 0,08 

< 750 N/mm 2 70 0,01 - 0,02 0,02 - 0,05 0,05 - 0,08 

< 1000 N/mm 2 30 0,005 - 0,015 0,015 - 0,03 0,03 - 0,065 

< 1500 N/mm 2 10 0,005 - 0,01 0,01 - 0,025 0,025 - 0,05 


< 200 HB 120 0,02 - 0,032 0,02 - 0,065 0,05 - 0,18 

> 200 HB 80 0,01 - 0,02 0,02 - 0,05 0,05 - 0,1 

Copper 

< 500 N/mm 2 250 0,01 - 0,02 0,02 - 0,05 0,05 - 0,15 

Copper Alloy 

Aluminium 

180 0,015 - 0,04 0,05 - 0,1 0,1 - 0,15 

360 0,03 - 0,07 0,1 - 0,15 0,13 - 0,25 

Aluminium – High Silicon 

200 0,03 - 0,05 0,05 - 0,1 0,1 - 0,2 

All recommendations should be considered a starting point, with possible variations to achieve optimum results. 

Increase the speed 20~30% when using coated endmills. 



Technical 


121 

www.sgstool.com


Hi-PerCarb - Series 135M, 3 x D 

Material 

Hardness 

v c in 

m/min 

Drill Diameter (mm) 

ø 3 - 5 ø 5,1 - 8 ø 8,1 - 13 ø 13 - 16 ø 16 - 20 

Feed per Revolution (mm) 

Low Carbon Steel < 700 N/mm 2 120-150 0,13 - 0,21 0,21-0,31 0,31-0,40 0,40 - 0,50 0,50 -0,60 

Alloy Steel < 900 N/mm 2 90-110 0,1 - 0,15 0,15 - 0,23 0,23 - 0,31 0,31 - 0,38 0,38 - 0,45 

Tool Steel < 1200 N/mm 2 70-100 0,076 - 0,15 0,13 - 0,18 0,18 - 0,25 0,25 - 0,33 0,33 - 0,40 

150 - 200 HB 130 0,25 - 0,36 0,36 - 0,43 0,43 - 0,51 0,51 - 0,61 0,61 - 0,71 


200-300 HB 90 0,21 - 0,31 0,31 - 0,36 0,36 - 0,43 0,43 - 0,51 0,51 - 0,61 

300-400 HB 80 0,15 - 0,25 0,25 - 0,31 0,31 - 0,38 0,38 - 0,46 0,46 - 0,51 

Stainless Steel, 300 Series < 700 N/mm 2 45 0,05 - 0,1 0,1 - 0,15 0,15 - 0,21 0,21 - 0,25 0,25 - 0,31 

Titanium, Ti6Al4V < 280 HB 30 0,05 - 0,076 0,076 - 0,1 0,1 - 0,15 0,15 - 0,21 0,21 - 0,25 

Inconel, 718 < 220 HB 20 0,025 - 0,051 0,05 - 0,076 0,076 - 0,1 0,1 - 0,13 0,13 - 0,15 

Aluminium 300 0,15 - 0,3 0,2 - 0,4 0,35 - 0,5 0,35 - 0,55 0,4 - 0,6 

Series 108M Plus 

Material 

Hardness 

v c in 

m/min 


ø 0,5 - 2 ø 2,1 - 5 ø 5,1 - 8 ø 8,1 - 12 ø 12,1 - 16 


Structural Steel, 


< 700 N/mm 2 120 0,05 - 0,1 0,08 - 0,12 0,1 - 0,2 0,15 - 0,25 0,2 - 0,35 

Alloy Steel < 900 N/mm 2 100 0,05 - 0,1 0,08 - 0,12 0,1 - 0,18 0,13 - 0,24 0,2 - 0,3 

Tool Steel < 1200 N/mm 2 80 0,05 - 0,1 0,08 - 0,12 0,1 - 0,15 0,12 - 0,2 0,18 - 0,28 

< 180 HB 120 0,08 - 0,15 0,1 - 0,2 0,15 - 0,23 0,2 - 0,3 0,25 - 0,4 


< 250 HB 80 0,06 - 0,12 0,08 - 0,18 0,1 - 0,21 0,18 - 0,25 0,2 - 0,35 

< 350 HB 60 0,04 - 0,11 0,06 - 0,16 0,1 - 0,2 0,15 - 0,25 0,2 - 0,3 

Stainless Steel < 700 N/mm 2 45 0,03 - 0,08 0,05 - 0,1 0,1 - 0,15 0,12 - 0,2 0,18 - 0,25 

Titanium < 280 HB 30 0,03 - 0,05 0,05 - 0,075 0,07 - 0,1 0,08 - 0,15 0,12 - 0,2 

Inconel < 220 HB 20 0,01 - 0,03 0,025 - 0,05 0,04 - 0,075 0,07 - 0,11 0,1 - 0,13 

Aluminium 300 0,08 - 0,15 0,1 - 0,2 0,13 - 0,25 0,2 - 0,3 0,25 - 0,35 

Technical 


ICe-Carb 5D - Series 137M, 5 x D 

Material 

Hardness 

v c in 

m/min 


ø 3 - 5 ø 5,1 - 8 ø 8,1 - 12 ø 12,1 - 16 




< 700 N/mm 2 120 0,1 - 0,2 0,1 - 0,3 0,18 - 0,4 0,25 - 0,5 

Alloy Steel < 900 N/mm 2 100 0,1 - 0,18 0,13 - 0,25 0,15 - 0,35 0,2 - 0,4 

Tool Steel < 1200 N/mm 2 60 0,08 - 0,15 0,13 - 0,2 0,15 -0,3 0,2 - 0,35 

< 180 HB 110 0,15 - 0,25 0,25 - 0,4 0,4 - 0,5 0,45 - 0,55 


< 250 HB 80 0,12 - 0,2 0,2 - 0,3 0,3 - 0,35 0,35 - 0,45 

< 350 HB 60 0,1 - 0,15 0,15 - 0,25 0,25 - 0,32 0,32 - 0,42 

Stainless Steel < 700 N/mm 2 45 0,05 - 0,1 0,08 - 0,15 0,13 - 0,2 0,18 - 0,25 

Titanium < 280 HB 30 0,05 - 0,075 0,075 - 0,1 0,1 - 0,15 0,15 - 0,2 

Inconel < 220 HB 20 0,025 - 0,05 0,05 - 0,075 0,075 - 0,13 0,1 - 0,15 

Aluminium 300 0,15 - 0,3 0,2 - 0,4 0,35 - 0,5 0,35 - 0,55 

122 





ICe-Carb - Series 140M, 7 x D 

Material 

Hardness 

v c in 

m/min 


ø 3 - 5 ø 5,1 - 8 ø 8,1 - 12 ø 12,1 - 16 




< 700 N/mm 2 120 0,1 - 0,2 0,1 - 0,3 0,18 - 0,4 0,25 - 0,5 

Alloy Steel < 900 N/mm 2 100 0,1 - 0,18 0,13 - 0,25 0,15 - 0,35 0,2 - 0,4 

Tool Steel < 1200 N/mm 2 60 0,08 - 0,15 0,13 - 0,2 0,15 -0,3 0,2 - 0,35 

< 180 HB 110 0,15 - 0,25 0,25 - 0,4 0,4 - 0,5 0,45 - 0,55 


< 250 HB 80 0,12 - 0,2 0,2 - 0,3 0,3 - 0,35 0,35 - 0,45 

< 350 HB 60 0,1 - 0,15 0,15 - 0,25 0,25 - 0,32 0,32 - 0,42 

Stainless Steel < 700 N/mm 2 45 0,05 - 0,1 0,08 - 0,15 0,13 - 0,2 0,18 - 0,25 

Titanium < 280 HB 30 0,05 - 0,075 0,075 - 0,1 0,1 - 0,15 0,15 - 0,2 

Inconel < 220 HB 20 0,025 - 0,05 0,05 - 0,075 0,075 - 0,13 0,1 - 0,15 

Aluminium 300 0,15 - 0,3 0,2 - 0,4 0,35 - 0,5 0,35 - 0,55 

Series 106M - Ti-NAMITE A 

Hardness HRC 

v c in 

m/min 


ø 1 - 3 ø 3,5 - 6 ø 6,5 - 10 ø 10,5 - 12 


50 - 55 30 0,05 0,08 0,11 0,14 

55 - 60 20 0,04 0,07 0,1 0,13 

60 - 65 15 0,03 0,06 0,09 0,12 

Technical 




123 

www.sgstool.com


General Purpose Carbide Drills 

Material 

v c in 

m/min 


ø 0,5 - 3 ø 3 - 6 ø 6 - 9 ø 9 - 12 ø 12 - 20 


Description 


< 500 N/mm 2 95 0,05 - 0,08 0,085 - 0,1 0,1 - 0,15 0,15 - 0,2 0,2 - 0,25 St 37-2 

< 650 N/mm 2 85 0,05 - 0,08 0,085 - 0,1 0,1 - 0,15 0,15 - 0,2 0,2 - 0,25 St 50-2 

< 850 N/mm 2 75 0,03 - 0,05 0,05 - 0,085 0,085 - 0,12 0,1 - 0,18 0,15 - 0,2 St 70-2 


< 800 N/mm 2 80 0,05 - 0,08 0,085 - 0,1 0,1 - 0,15 0,15 - 0,2 0,2 - 0,25 C 10 

< 1000 N/mm 2 75 0,03 - 0,05 0,05 - 0,085 0,085 - 0,12 0,1 - 0,18 0,15 - 0,2 13 Cr 2 

Nitriding Steel 

< 1000 N/mm 2 75 0,03 - 0,05 0,05 - 0,085 0,085 - 0,12 0,1 - 0,18 0,15 - 0,2 41 CrAlMo 7 

< 1300 N/mm 2 65 0,03 - 0,05 0,05 - 0,085 0,085 - 0,12 0,1 - 0,18 0,15 - 0,2 31 CrMoV 9 

Heat Treatable Steel 

< 700 N/mm 2 90 0,05 - 0,08 0,085 - 0,1 0,1 - 0,15 0,15 - 0,2 0,2 - 0,25 C 25 

< 900 N/mm 2 80 0,05 - 0,08 0,085 - 0,1 0,1 - 0,15 0,15 - 0,2 0,2 - 0,25 C 50 

< 1200 N/mm 2 65 0,01 - 0,02 0,025 - 0,06 0,06 - 0,09 0,085 - 0,13 0,1 - 0,15 37 MnSi 4 

< 1400 N/mm 2 50 0,01 - 0,02 0,025 - 0,06 0,06 - 0,09 0,085 - 0,13 0,1 - 0,15 34 CrNiMo 6 

Tool Steel 

< 800 N/mm 2 50 0,01 - 0,03 0,02 - 0,06 0,05 - 0,08 0,075 - 0,1 0,08 - 0,12 

< 1000 N/mm 2 40 0,01 - 0,03 0,02 - 0,06 0,05 - 0,08 0,075 - 0,1 0,08 - 0,12 

< 1200 N/mm 2 35 0,01 - 0,02 0,015 - 0,04 0,035 - 0,055 0,045 - 0,08 0,075 - 0,1 

< 1400 N/mm 2 30 0,01 - 0,02 0,015 - 0,04 0,035 - 0,055 0,045 - 0,08 0,075 - 0,1 

> 1400 N/mm 2 25 0,01 - 0,02 0,015 - 0,04 0,035 - 0,055 0,045 - 0,08 0,075 - 0,1 


< 700 N/mm 2 50 0,015 - 0,03 0,025 - 0,06 0,05 - 0,1 0,075 - 0,13 0,1 - 0,17 X 10 Cr 13 

< 850 N/mm 2 30 0,01 - 0,02 0,015 - 0,04 0,035 - 0,055 0,045 - 0,08 0,075 - 0,1 X 5 CrNi 18 10 

> 950 N/mm 2 25 0,01 - 0,02 0,015 - 0,04 0,035 - 0,055 0,045 - 0,08 0,075 - 0,1 X 35 CrMo 17 

Technical 


Cast Steel 

< 500 N/mm 2 75 0,02 - 0,06 0,05 - 0,09 0,07 - 0,12 0,09 - 0,15 0,1 - 0,18 GS-38 

< 650 N/mm 2 60 0,02 - 0,06 0,05 - 0,09 0,07 - 0,12 0,09 - 0,15 0,1 - 0,18 GS-60 

> 650 N/mm 2 40 0,02 - 0,06 0,05 - 0,09 0,07 - 0,12 0,09 - 0,15 0,1 - 0,18 GS-70 

High Temp. Alloys 

< 700 N/mm 2 35 0,01 - 0,03 0,02 - 0,05 0,04 - 0,055 0,05 - 0,075 0,06 - 0,1 NiCr 15 Fe 

< 900 N/mm 2 23 0,01 - 0,03 0,02 - 0,05 0,04 - 0,055 0,05 - 0,075 0,06 - 0,1 X 20 CrMoV 12 1 

< 1100 N/mm 2 20 0,01 - 0,03 0,02 - 0,05 0,04 - 0,055 0,05 - 0,075 0,06 - 0,1 X 8 CrCoNiMo 10 6 

< 1250 N/mm 2 18 0,01 - 0,02 0,015 - 0,04 0,035 - 0,045 0,04 - 0,06 0,05 - 0,08 X 5 NiCrTi 26 15 

< 1400 N/mm 2 15 0,008 - 0,01 0,01 - 0,03 0,025 - 0,035 0,03 - 0,04 0,035 - 0,05 NiCr 19 CoMo 

> 1400 N/mm 2 10 0,008 - 0,01 0,01 - 0,03 0,025 - 0,035 0,03 - 0,04 0,035 - 0,05 NiCr 20 Co 18 Ti 


< 550 N/mm 2 40 0,01 - 0,03 0,02 - 0,05 0,04 - 0,055 0,05 - 0,075 0,06 - 0,1 

< 950 N/mm 2 30 0,01 - 0,025 0,015 - 0,04 0,035 - 0,045 0,04 - 0,06 0,05 - 0,08 

< 1500 N/mm 2 20 0,01 - 0,025 0,015 - 0,04 0,035 - 0,045 0,04 - 0,06 0,05 - 0,08 


< 200 HB 100 0,03 - 0,06 0,04 - 0,1 0,08 - 0,15 0,09 - 0,17 0,12 - 0,23 

> 200 HB 80 0,03 - 0,06 0,04 - 0,1 0,08 - 0,15 0,09 - 0,17 0,12 - 0,23 

Copper 

< 500 N/mm 2 80 0,015 - 0,03 0,025 - 0,06 0,05 - 0,08 0,075 - 0,09 0,08 - 0,12 

Copper Alloy 

Aluminium 

110 0,015 - 0,03 0,025 - 0,06 0,05 - 0,08 0,075 - 0,09 0,08 - 0,12 

180 0,03 - 0,05 0,05 - 0,125 0,1 - 0,18 0,15 - 0,2 0,17 - 0,3 

124 


Aluminium – High Silicon 

110 0,03 - 0,05 0,05 - 0,125 0,1 - 0,18 0,15 - 0,2 0,17 - 0,3 

All recommendations should be considered a starting point, with possible variations to achieve optimum results. 

Increase the speed 20~30% when using coated endmills 



Request Form for Special Tools 

Contact information 

SGS Carbide Tool (UK) Ltd. 

Fax: +44 - 1189 - 795-295 

Tel.: +44 - 1189 - 795-200 

Distributor 

End user 

Contact 

Address 

Telephone 

Fax 

E-mail 

Quantities to quote 

Estimated annual quantities 

Target pricing 

Date / Signature 

End mill 

Number of flutes 

Full Radius 

Corner Radius 

mm 

Square End 

Tapered endmill 


Full Radius 

Corner Radius 

mm 

! 

* Any information not completed is subject to SGS 

standards or recommendations 

Square End 

Request Form 


Type of shank 

Straight Shank 

Weldon Flat 

Other 

Coolant delivery 

Dry 

JetStream 

Internal 

Coating 


Ti-NAMITE-X® (AlTiN) 

Ti-NAMITE-B® (TiB 2 ) 

Amorphous Diamond 

CVD Pure Diamond 

No Coating 

Similar SGS product 

*EDP or series 

Material to machine 

Specify Material 

Hardness 

HRc / BHN 

Type of application 

Pocketing 

Slotting 

Profiling 

Notes / Comments 

125 

www.sgstool.com




Fax: +44 - 1189 - 795-295 

Tel.: +44 - 1189 - 795-200 

Distributor 

End user 

Contact 

Address 

Telephone 

Fax 

E-mail 





Straight flute 


Full Radius 

Corner Radius 

mm 

Square End 

Step end mill 


Full Radius 

Corner Radius 

mm 

Request Form 


! 



Square End 

Type of shank 


Weldon Flat 

Other 


Dry 

JetStream 

Internal 

Coating 






No Coating 





Hardness 

HRc / BHN 

Type of application 

Pocketing 

Slotting 

Profiling 


126 

www.sgstool.com




Fax: +44 - 1189 - 795-295 

Tel.: +44 - 1189 - 795-200 

Distributor 

End user 

Contact 

Address 

Telephone 

Fax 

E-mail 





Drill 


Helix angle 

Stepped drill 


Helix angle 

! 



Request Form 


Type of shank 


Weldon Flat 

Other 


Dry 

JetStream 

Internal 

Coating 






No Coating 





Hardness 

Type of hole 

HRc / BHN 

Drill Chamfer 

Drill Counterbore 


127 

www.sgstool.com

Additional Price Information 

Coatings* 

Ti-NAMITE (TiN), 

Ti-NAMITE-C (TiCN), 


20% surcharge on uncoated price. 



25% surcharge on uncoated price. 

Weldon shank according to DIN 6535 HB* 

up to Ø 12mm incl. - £12 / up to Ø 18mm incl. - £15 / 

up to Ø 25mm incl. - £20. 

* For items not already within pricelist 

JetStream Cooling Channels 

Jetstream uniquely positioned coolant channels are engineered 

and patented to maximise coolant flow and delivery to the shear zone. 

Thus maximising the benefits of properly delivered coolant flow in 

demanding machining applications. 

Surcharge for JetStream 

EDP No. Ø-Range Price in £ 

jet1 Ø 12 - 12,5 mm 19,50 

jet2 Ø 13 - 14 mm 24,00 

jet3 Ø 14,5 - 15,5 mm 26,00 

jet4 Ø 16 - 19 mm 28,00 

jet5 Ø 19,5 - 25 mm 30,00 


Information 

Example of coolant fl ow 

at 10.000 min -1 

Surcharge for specific burr flute style. 

Type: 

Fine Cut 10% 

Course Cut 10% 

Diamond Cut 20% 

There is no additional charge for chipbreaker. 

128 

www.sgstool.com

Regrinding Prices in £ 

Endmills 

Ø 

mm 

Uncoated 

Endmills 

Uncoated 

Endmills 

with radius 

Coated 

Endmills 

Coated 

Endmills 

with radius 

6 13,80 19,70 17,90 23,70 

8 13,80 19,70 19,00 24,90 

10 13,80 19,70 20,20 26,00 

12 15,30 21,80 22,90 29,40 

14 24,00 30,50 32,50 38,90 

16 24,00 30,50 34,80 41,30 

20 24,00 30,50 38,40 44,90 

25 32,70 40,30 61,40 69,00 

Drills 

Ø 

mm 

High Performance 

uncoated coated Ø 

mm 

End mill 

with & without Radius 

6 15,60 19,60 6 33.66 

8 15,60 20,80 8 34.94 

10 17,90 24,30 10 36.22 

12 19,80 27,40 12 40.70 

14 21,50 29,90 16 62.73 

16 27,20 38,00 20 66.57 

20 27,20 41,60 25 106.44 

An ‘Administration & Handling Fee’ of £5,00 will be charged on all orders 

under a net value of £100,00 

Main terms and conditions of sale 

All returns must be made within 3 months of date of invoice and all returns which are due to a customer 

error will be subject to 20% handling charge. 

Special tools are subject to a shipping allowance of +/- 10% or +/- 1 unit for orders less than 10 pieces, 

unless otherwise requested. During the design and/or manufacture of special products with customer 

supplied dim’s it may be necessary to change certain dimensions/tolerances to SGS requirements. 

All goods delivered shall remain Seller’s property (retention of title) until all claims in whatever legal 

grounds are paid including claims arising in the future or conditional claims and those arising from 

contracts concluded with purchaser at the same time or subsequently. 

Any increase in taxes, custom duties, consular fees, freight charges, insurance premiums or similar 

expenses shall be added to the Contract price. 

All prices listed are calculated from costs applicable at the date of publication. If there is any increase 

in such costs between the date of publication and despatch the Seller may increase the quoted price 

accordingly. 

Unless otherwise specifically agreed in writing payment shall be made to us within 30 days net monthly. 

Time of payment shall be the essence of the Contract. We reserve the right to charge interest on all 

overdue accounts at the rate set by our legal representatives using their solicitors account rules 1998 and 

will be applied from date of invoice. 

No dispute as to quality or performance of the products shall entitle the buyer to delay payment unless 

we shall have accepted liability for any alleged breach of warranty or condition in respect thereof or shall 

have been found so liable by a court of competent jurisdiction. 

We shall not be liable for any shortage in quantities delivered nor for any defect in the quality nature or 

condition of the products nor for failure of the products to comply with any specification unless a claim 

in writing shall have been received by us from the buyer within 5 working days of delivery of the products. 

The buyer shall accept delivery of ordered products not withstanding any variation in weights, 

dimensions or other characteristics from any specifications provided that such variations are within 

recognised tolerances. 

All disputes shall be subject to the jurisdiction of the English courts. 

Speeds & feeds supplied are to be used as a guide only and are based on minimum protrusion of tool in 

chuck. SGS do not take any responsibility for cost of tooling, work piece or any ancillary products in the 

event of a failure. 


Information 

129 

www.sgstool.com

130

SGS products are sold in over 60 countries 

USA: 

SGS Tool Company 

World Headquarters 

P.O. Box 187 

55 South Main Street 

Munroe Falls, Ohio 44262 U.S.A. 

Customer Service – 

US and Canada Tel.: +1 - 330-686-5700 

Fax - US and Canada: (800) - 447-4017 

International Fax: +1 - 330-686-2146 

E-mail: webmaster@sgstool.com 

Canada: 

SGS Tool Canada 

171 Northport Road, Unit #3 

Port Perry, ON L9L 1B2 

Tel.: +1 - 905 - 982 - 0888 

Fax: +1 - 905 - 982 - 0488 

E-mail: sgstool@bellnet.ca 

United Kingdom: 


Unit 1, The Metro Centre 

Toutley Road 

Wokingham, Berkshire, 

RG41 1QW England 

Tel.: +44 - 1189 - 795-200 

Fax: +44 - 1189 - 795-295 

E-mail: sales@sgstool.co.uk 

Germany: 

SGS Tool Europe GmbH 

Hitdorfer Straße 10c 

D-40764 Langenfeld 

Tel.: +49 - 21 73 - 91 00 91 

Fax: +49 - 21 73 - 91 00 99 

E-mail: info@sgs-tool.de 

France: 

SGS France 

36 Rue des Landes 

BP 28 

78401 Chatou Cedex 

Tel.: +33 - 139 - 52 82 80 

Fax: +33 - 130 - 53 49 19 

E-mail: sgsfrance@sgstool.fr 

Italy: 

SGS Tool Italia SRL 

20123 MILANO 

Via Falcone, 5 

Tel.: +39 02 72 00 23 95 - 02 72 00 23 72 

Fax: +39 02 89 01 04 21 

E-mail: italiasales@sgstool.eu 

Scandinavian Sales: 

Tel.: +44 - 1189 - 795-200 

E-mail: scansales@sgstool.eu 

Iberia Sales: 

Tel.: +44 - 1189 - 795-200 

E-mail: iberiasales@sgstool.eu 

Eastern Europe: 

Sintcom 

Tel.: +359 - 283 - 64421 

Fax: +359 - 283 - 64421 

E-mail: sintcom@cablebg.net 

Russia: 

Haltec 

Tel.: +7 - 842-241-4717 

Fax: +7 - 842-241-7619 

E-mail: info@haltec.ru 

China: 

SGS Tool Shanghai 

Tel.: +86 - 21 - 58 68 28 09 - 107 

Fax: +86 - 21 - 58 68 28 03 

E-mail: sgsshanghai@126.com 

SGS018 1103 Catalogue 2011 - EN - 4.0 BW

SGS-Katalog 2011

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?