Rugged/Power

smd.hu

Rugged/Power

RUGGED/POWER

CAPABILITIES GUIDE

AUGUST 2008


BOARD-TO-BOARD

Extended Life Products

EXTENDED LIFE PRODUCT

TM

TIGER EYE CONTACT SYSTEM

SFM/TFM, SMM/TMM

& SEM/TEM Series

• High reliability

• High mating cycles

• Multi-finger contact

EDGE RATE CONTACT SYSTEM

ERM8/ERF8, SEAM/SEAF &

QEF8/QEM8 Series

• Designed for Signal Integrity

• Superior impedance control

• Reduced broadside

coupling (crosstalk)

Rugged contact system

TIGER CLAW

CONTACT SYSTEM

CLP/FTSH,

CLT/TMMH &

CLM/FTMH Series

• Dual wipe

• Pass-through

applications

• Ultra low profile

Extended Life Products

• E.L.P. Products are tested to rigorous

standards which evaluate contact resistance

in simulated storage and field conditions

• 10 year Mixed Flowing Gas (MFG)

• High Mating Cycles (250 to 2,500)

• Certain plating and/or contact options will

apply; see product series pages at www.

samtec.com for E.L.P. Certified options

• For complete details on Samtec’s E.L.P.

program and test results for Extended Life

Products, please visit www.samtec.com/ELP

or e-mail the Customer Engineering Support

Group at CES@samtec.com; all testing

scheduled for completion by September 2008

Pitch Type Contact Series*

0,5mm

Q Series ® Strip Blade & Beam QSH/QTH

Basic Strip Blade & Beam BSH/BTH

0,635mm

Q Series ® Strip Blade & Beam QSS/QTS

Basic Strip Blade & Beam BSS/BTS

0,8mm

1,00mm

1,27mm

2mm

2,54mm

Edge Rate Strip Edge Rate ERF8/ERM8

High Speed Strip Edge Rate QEF8/QEM8

Q Series ® Strip Blade & Beam QSE/QTE

Basic Strip Blade & Beam BSE/BTE

Strip Tiger Eye SEM/TEM

Strip Tiger Beam MLE/FTMH

Strip Tiger Claw CLM/FTMH

SEARAY Array Edge Rate SEAF/SEAM

Strip Tiger Eye SFM/TFM

Strip Tiger Claw CLP/FTSH

Strip Tiger Beam FLE/FTSH

Strip Tiger Eye SMM/TMM

Strip Tiger Claw CLT/TMMH

Strip Box SSM/TSM

Strip Box BCS/TSW

* Tested socket/terminal combination shown. Other mating headers also available.

Call Samtec if header design you need is not shown. QXX & BXX require special plating.

CONTACT

BLADE AND BEAM CONTACT SYSTEM

QXX & BXX Series

• Micro Pitch

• Mating/alignment “friendly”

• Cost effective

• Special plating required

TIGER BEAM

CONTACT SYSTEM

FLE/FTSH &

MLE/FTMH Series

• Best cost

• Reliable

performance

• Post and beam

contact


BOARD-TO-BOARD

Rugged Tiger Eye

Standard and cost-saving

designs on 1,27mm pitch

Locking clip and

alignment pin options

Next generation Micro Rugged

interconnects on 0,8mm pitch

Mating discrete

wire cable and

IP68-rated sealed

circular systems also

available

TIGER EYE

CONTACT SYSTEMS

• High reliability three-finger

BeCu contact system

• High mating cycles

• Multi-finger contact

Tiger Eye Board-to-Board

Connector Systems

• 1,27mm (.050") micro pitch system

(SFM/TFM Series)

• 0,8mm (.0315") micro pitch system

(SEM/TEM Series)

• 2mm (.0787") pitch system

(SMM/TMM Series)

• High reliability Tiger Eye three-finger

BeCu contact system

• Standard and cost-saving designs

• Friction latching system for higher

withdrawal forces (optional)

• Surface mount orientation

• Through-hole sockets & terminals

(SFM/TFM & SMM/TMM Series) and

Right Angle terminals

(TFM & TMM Series) also available

• Choice of alignment pin, locking clip

or weld tab options

• Shrouded, polarized and keyed

• Choice of mated heights

• Extended Life Product Testing Available

• 1,27mm (.050") pitch discrete wire and

IP68-sealed cable systems also available

2mm system available with

application specific locking clip

Additional Tiger Eye Contact t

Products:

Tiger Eye

Cable Assemblies

1,27mm (.050") pitch Discrete Wire

system (SFSD/TFSD Series) mates

with Tiger Eye connectors and has

optional rugged metal latching

for positive retention

Tiger IDC assemblies on .050"

and 2mm pitch in rugged and

low-cost versions, with optional

rugged strain relief

AccliMate Sealed

Circular System

Sealed Circular cable plug and receptacle

(SCP3/SCR3 Series)

IP68-rated for dust and waterproof sealing

Size 10 shell with 14 Tiger Eye contacts on

1,27mm (.050") pitch

Double-ended with choice of Socket

(SFSD Series) or Terminal (TFSD Series) end

AccliMate Sealed

Rectangular System

Sealed Rectangular cable plug

and receptacle

IP68-rated for dust and waterproof sealing

10, 15 or 20 Tiger Eye contacts on

1,27mm (.050") pitch

Currently in-design; contact Samtec for

more information

1


BOARD-TO-BOARD

Edge Rate Contact System

Edge Rate Board Level

Interface Systems

• Lower-cost alternative to high

speed Q Strip ® connectors

• Robust when zippered during

mating and unmating

• Increased cycle life over

one piece system

• 0,8mm pitch

• Surface Mount (ERF8/ERM8 Series),

Right Angle (ERF8-RA/ERM8-RA

Series) and Edge Mount

(ERM8-EM Series) available

• 7, 10, 12, 14 and 16mm stack heights

• Estimated performance to 7 GHz

(both DP and SE configurations)

• "Direct-to-Lead" coax cable

assembly (ERCDA Series) mates

with Edge Rate connectors; cable

terminated directly to lead for

optimized Signal Integrity

EDGE RATE

CONTACT SYSTEMS

• Designed for Signal Integrity

• Superior impedance control

• Reduced broadside coupling

Rugged contact systems

Direct-to-Lead coax cable

optimizes Signal Integrity

Optional rugged metal

latching systems

Edge Rate

Contact Design

Smooth broad milled

surface for mating

Stamped

Contact Design

Rough thin cut edge

mating surface

Thin cut edge

decreases crosstalk

Wide structural surface

increases broadside coupling

Additional Board Level Edge Rate Contact Systems:

SEARAY

Open Pin Field Array

(1,27mm x 1,27mm) grid array

(SEAM/SEAF Series)

Maximum grounding and

routing flexibility

Choice of stack heights

from 7mm to 16mm

Up to 500 Single-ended

I/Os or 125 Differential Pairs

Right angle version in design

High Speed Interface System

0,8mm pitch (QEF8/QEM8 Series)

High Speed Interconnect System

Footprint compatible with

QTE/QSE Series

Increased insertion depth

and contact wipe

Integral metal plane for power or

ground rated up to 8.9A

7mm and 10mm stacking height

Edge Rate

Micro Card Socket

0,8mm pitch (HSEC8 Series)

Surface mount and edge

mount designs for parallel,

perpendicular and planar

board mating

Mates with standard .062"

(1,60mm) PCB cards

Optional rugged board locking

and cable latching features

SiliconBlade Socket

0,8mm pitch socket

(SBS Series) for user-friendly

SiliconBlade insertion and

extraction

Pin count allows for

compliance with numerous

protocols (USB, SATA,

SD, etc.)

Deep polarizing guide rails

Robust retention latches

5


POWER-TO-BOARD

PowerStrip Interconnects

Rugged blade-style contacts

save PCB real estate

STRIP

STRIP 25

Power/Signal combos with

up to 80 signal contacts on

2mm x 2mm pitch

POWERSTRIP/25

High Power board level and

discrete wire cable systems

& board level Signal/Power

Combo systems with up to

25A on .200" pitch

Vertical and

Right Angle Systems

PowerStrip/25

High Power Interconnects

• Ultra small high power system with up

to 25A per contact (MPT/MPS Series)

• Up to 8 power pins on

5,08mm (.200") pitch

• Vertical Headers & Sockets

and Right Angle Headers

• Right Angle versions with screw downs

also available

Power/Signal combination (MPTC/MPSC

Series) es) with

up

to 80 signal contacts on

2mm x 2mm

(.0787" x .0787") pitch

• Optional locking clips

• Application p io

specific asymmetrical power

pin placement available

PowerStrip/25 rip/25

Discrete Wire Cable

assemblies s (MPSS Series) with choice

of

14 AWG

or 16 AWG coax cable and

rugged ged

latching system

Rugged metal latching system

for positive retention

Additional PowerStrip High Power Products:

STRIP 35 STRIP 10

STRIP 25

PowerStrip/35 Interconnects

Up to 8 power contacts on 6,35mm

(.250") pitch (PET/PES Series)

Up to 35A per contact

Right Angle and Vertical Headers

& Sockets

Power/Signal combo (PETC/PESC

Series) with up to 40 signal contacts

on .100" (2,54mm) pitch

Hinged PowerStrip/25 Systems

Hinged Socket (FMPS Series) allows

mating with Terminal (FMPT Series)

on different angles

Up to 6 Power Pins on 3,81mm (.150") pitch

Up to 25A per contact

Currently in design; contact Samtec for

more information

PowerStrip/10 Modular Power

Modular system (UPS/UPT Series) for

customized power combinations

1 or 2 Power Pins per module on

3,81mm (.150" pitch)

Up to 10A per contact

Snap modules together for all-power

system or into choice of select high speed

connector systems

6


POWER-TO-BOARD

High Speed Rugged/Power

High Speed Rugged/Power

Interconnect Systems

• Q2 (OMS/QFS Series) with

rugged contact system on

0,635mm (.025") pitch

• Q2 also has optional power

pins rated up to 4.1A at 80°C

• High Speed Strip

(QEM8/QEF8 Series) with

Edge Rate contacts on

0,8mm (.0315") pitch

• Increased insertion depth and

contact wipe

• Integral power/ground planes

rated for up to 8.9A at 80°C

• Wide variety of standard high

speed mating cable assemblies

• Right angle and edge mount

designs available

• Polarization and alignment

pins available

• Optional shielding

• Guide posts and friction

locks available

• Quiet Power combination

signal/power cable assemblies

Performance to

8 GHz (SE) at -3dB

RUGGED Q

FOR POWER

Rugged Edge Rate

contact system

improves "zippered"

unmating and reduces

broadside coupling

Integral power plane

rated up to 8.9A

Increased insertion

depth and contact wipe

Optional power pins

rate up to 4.1A at 80°C

Integral metal plane for power

or ground rated up to 8.9A

Additional Board-to-Board High Speed Rugged/Power Systems:

SERIES

ES

CONTACT

Q Series ® High Speed

Interconnects

0,5mm, 0,635mm and

0,8mm micro pitch (QSH/QTH,

QSS/QTS, QSE/QTE Series)

5mm and 8mm stack heights

Integral power/ground plane

Single-ended Q Strip ® and

Differential Pair Q Pairs ® designs

Elevated Q Series ®

Standard and Application

Specific stack heights from

5mm to 30mm

0,50mm, 0,635mm and

0,80mm pitch

Single-ended and

Differential Pair

BasicBlade&BeamBlade Beam

Contact Systems

0,5mm, 0,635mm and

0,8mm micro pitch (BSH/BTH,

BSS/BTS, BSE/BTE Series)

Cost effective, mating and

alignment "friendly" Blade &

Beam contact system

20 to 300 I/Os

Rugged Features & Options

Precision machined standoffs for

5mm to 30mm board spacing

Alignment pins, guide posts

and polarization options

Friction locks for increased

retention/withdrawal force

Retention pins increase

unmating force by up to 50%

7


POWER-TO-BOARD

Power Mate & Mini Mate ®

Rugged Metal Latching

Discrete Wire Systems:

Power Mate with 5.5A per contact,

and Mini Mate ® with 3.6A per contact

SERIES

POWER MATE &

MINI MATE ®

10A on .165" (4,19mm) pitch

and 3A on .100" (2,54mm) pitch

Board Level systems, Discrete

Wire and IP68-rated Sealed

Circular cable systems

Power Mate & Mini Mate ® stack

heights match a variety of high speed

interconnect systems

Power Mate & Mini Mate ®

Interconnect Systems

• 10A Power Mate Board-to-Board

system on .165" (4,19mm) pitch

(IPBT/IPBS Series)

• 3A Mini Mate ® Board-to-Board

system on .100" (2,54mm) pitch

(IPT1/IPS1 Series)

• Optional polarization and guide posts

• Through-hole, surface mount and

right angle orientations

• Single or double row

• Latching mechanism for mating

with IPBD Series

• Optional locking clips, alignment pins

and polarization

Rugged metal latching system available

for IPT1/IPS1 Series


Individually shrouded contacts


Stack heights match a variety of

Signal Integrity Board-to-Board

systems including high density arrays,

high speed connectors and elevated

riser card systems


Power Mate and Mini Mate ® discrete

wire and AccliMate IP68-rated sealed

circular cable-to-board systems

Additional diti

Power Mate & Mini Mate

® products:

Discrete Wire Cable Assemblies

Power Mate discrete wire system

with power contacts on .165" (4,19mm)

pitch; 5.5A per contact (PMSD, PMSS,

IPBD Series)

Mini Mate ® discrete wire system on

.100" (2,54mm) pitch; 3.6A per contact

(MMSD, MMSS, IPD1 Series)

Polarized, with guide pins and

latching system

AccliMate Sealed Circular

Power Mate

IP68-rated cable plugs and receptacles

(SCP1/SCR1 Series)

Size 10 Shell with 4 Power Pins or Size 17

Shell with 16 Power Pins

Unsealed receptacle end mates with

Power Mate IPBT Series Terminal Strip

AccliMate Sealed Circular

Mini Mate ®

IP68-rated cable plugs and receptacles

(SCP2/SCR2 Series)

Size 10 Shell with 10 High Density Pins or

Size 17 Shell with 32 High Density Pins

Unsealed receptacle end mates with

Mini Mate ® IPL1 Series Terminal Strip

8


POWER-TO-BOARD

Headers & Sockets

Flexible Stacking Systems

• .156" (3,96mm) pitch, 8.2A systems

(FWJ, HFWJ, JW, FHP Series)

• .200" (5,08mm) pitch, 7.9A & 6.8A systems

(HPM, HPW, HPF Series)

• Headers, stackers and sockets

• Standard and high power

• Through-hole, right angle and surface mount

• Pass-through sockets

• Combination Power/Signal systems

Rugged one piece interfaces

• Optional locking clips

Power Eye Contacts designed for

power applications with up to 15A

carrying capacity

Pass-through

8.2A systems on

.156" (3,96mm) pitch

HEADER, SOCKET

& STACKER

FLEXIBILITY

Through-hole, surface

mount, right angle,

pass-through, one-piece

and Power/Signal

combo options

7.9A & 6.8A systems on

.200" (5,08mm) pitch

Right Angle

Additional Rugged/Power Header & Socket Systems:

TM

Combination Power/Signal

7A (at 75°C) system

(HPMC/HPFC Series)

Up to 4 power terminals/sockets

Up to 24 signal leads/sockets

on .100" (2,54mm) pitch

Surface mount or

through-hole orientations

Power Eye contact

system designed for high

power applications

One Piece Interfaces

5A and 2.6A systems

(OPP & PEC Series)

High shock/vibration applications

Reduced component and

processing cost

Rugged threaded inserts

Optional alignment pins

and locking clips for

increased stability

Tiger Claw

Contact System

Dual wipe Tiger Claw

contact system on 0,8mm

and 0,635mm pitch

(CLP, FTSH & CLT/TMMH Series)

Ultra low profile

Guide post and rugged board

mating options

Pass-through applications

Extended Life Product Testing

Tiger Beam

Contact Systems

Reliable Tiger Beam post

and beam contact systems

on .050", 2mm and .100" pitch

(FLE/FTSH & MLE/FTMH

Series)

Surface Mount and

through-hole

Shrouded options

Extended Life Product Testing

9


TM

TM

CABLE-TO-BOARD

Discrete Wire Systems

Socket or Terminal termination

Optional latching system

for positive retention

TIGER EYE DISCRETE WIRE

High reliability three-finger BeCu

contact system on .050" pitch

Polarization and guide

pins available

Rugged Metal

Latching

IP68-rated Sealed

Circular System

POWER MATE

& MINI MATE ®

5.5A per contact on .165" pitch,

or 3.6A per contact on .100" pitch

Rugged Discrete Wire

Cable Assemblies

• Tiger Eye Discrete Wire system on

.050" (1,27mm) pitch (SFSD/TFSD Series)

mates with SFM/TFM Series connectors

Power Mate discrete wire system

with power contacts on .165" (4,19mm)

pitch; 5.5A per contact (PMSD, PMSS,

IPBD Series)

• Mini Mate ® discrete wire system on

.100" (2,54mm) pitch; 3.6A per contact

(MMSD, MMSS, IPD1 Series)

• Single or double-ended

• Socket and terminal terminations

• Polarized, with optional rugged latching

systems for increased withdrawal forces

Power Mate and Mini Mate ® available

as through-hole, surface mount or right

angle, with optional alignment pins and

locking clips

• Tiger Eye is shrouded and keyed for

rugged applications

• Available as components or complete

assemblies

Additional Discrete Wire

Cable Assemblies:

e

s:

STRIP 25

PowerStrip/25 Discrete Wire

Ultra small high power discrete wire socket

assemblies (MPSS Series) mate with

PowerStrip/25 terminals (MPT Series)

25A per contact and up to 8 power

pins on 5,00mm (.197") pitch

Choice of 14 AWG or 16 AWG

coax cable

Rugged latching system

IsoRate Discrete Wire RF System

Isolated Transmission Line Ganged RF

Discrete Wire Cable (GITJ-C Series)

mates with IsoRate Ganged RF Plug

(GITP Series)

Rugged Edge Rate contact system on

4,00mm (.1575") pitch

High performance 50Ω 26 AWG, RG 316

coax cable

Positive latching system

AccliMate Sealed Circular Systems

IP68-rated sealed circular cable plugs

and receptacles

Tiger Eye High Reliability Contact System

(SCP3/SCR3 Series)

Power Mate High Power System

(SCP1/SCR1 Series)

Mini Mate ® High Density System

(SCP2/SCR2 Series)

10


CABLE-TO-BOARD

Rugged Cable

Rugged EyeSpeed

Direct Cable Systems

HIGH SPEED CABLE

A S S E M B L I E S

RUGGED EDGE RATE CABLES

0,8mm (.0315") pitch system on 34 AWG

EyeSpeed micro coax cable

• Patent-pending "Direct-to-Lead" cable

termination optimizes Signal Integrity

with elimination of transition board,

reducing overall system cost

Rugged Edge Rate Cable Assembly

on 0,8mm (.0315") pitch, with high

performance 34 AWG EyeSpeed

micro coax cable (ERCDA Series),

mates with rugged Edge Rate board

level sockets (ERF8 Series)

Rugged Q2 Cable Assembly on

0,635mm (.025") pitch, with high

performance 36 AWG EyeSpeed

micro coax cable (Q2DA) mates with

rugged Q2 Series terminal strips

• 50Ω single-ended signal routing

• Hot swappable

• Edge Rate assembly with standard

rugged friction locks

• Q2 assembly with standard guide

post holes

Signal

lead

Standard guide

post holes

Conductor

Dielectric

Shield

Insulator

Ground

Standard rugged

friction locks

"Direct-to-Lead" cable

termination optimizes

Signal Integrity

Edge Rate Contact system

designed for Signal Integrity


RUGGED Q2 CABLES

0,635mm (.025") pitch system

on 36 AWG EyeSpeed

micro coax cable

Additional diti

Rugged ge

Cable Products:

Power/Signal Combo Cable

52 signal lines on 38 AWG 50Ω

EyeSpeed coax cable

26 power lines on 26 AWG 13Ω

Quiet Power coax cable (6QP Series)

Quiet Power cable minimizes

EMI aggression and coupling of

high speed signals

Mates with Rugged Q2 High Speed

Socket (QFS Series) on 0,635mm pitch

Rugged Flat Cable IDC Systems

Rugged Tiger Eye 2mm IDC Cable (TCSD)

Low Cost socket system with Tiger Beam

contacts on 2mm pitch (TLSD Series)

Low Profile, Flexible Standard Pitch systems

with pin counts from 2 to 36 per row, choice of

dual beam sockets or plug terminations

Optional Strain Relief for rugged applications

Ejector Headers

Ruggedized Cable Assemblies

Retention pins increase unmating force

by up to 50%

Metal or plastic friction locks and positive

latching systems increase retention/

withdrawal force

Captive panel screws

Screw downs and mounting brackets

Ejector headers with locking caps

AccliMate Sealed Circular Systems

11


PANEL & I/O

High Speed Systems

26 AWG MiniSkew

Low Skew Pair (LSP) Cable

DATA RATE I/O CABLE

A S S E M B L I E S

RUGGED HIGH SPEED

I/O CABLES

Low Skew Pair cable with Edge Rate

Contacts and EMI Shielding, and HDMI

systems with choice of LSP or STP cable

Connector design saves

PCB real estate

Rugged High Speed I/O Cables

• Edge Rate I/O Cable with rugged contact

system on 26 AWG MiniSkew Low Skew Pair

(LSP) cable (EPLSP Series)

• HDMI & Mini HDMI I/O Cables with

choice of 26 AWG MiniSkew LSP or

28 AWG Shielded Twisted Pair cable

(HPLSP, HPSTP Series)

• Edge Rate connector design minimizes

PCB real estate, while contacts reduce

broadside coupling and optimize signal

integrity and cycles

• 100Ω differential pair signaling

• Hot pluggable

• Edge Rate System has rugged die cast

housing, positive latching and shielding

for EMI protection

• HDMI Systems are tested to HDMI

Category 2 higher performance and mate

with industry standard HDMI receptacles

• 30 AWG EyeSpeed MS twinax cable for

inside-the-box HDMI cable applications

also available (HPDPI Series)

HDMI is a trademark

of HDMI Licensing LLC.

Choice of MiniSkew

Low Skew Pair or Shielded

Twisted Pair Cable

Additional High Speed Panel & I/O Products:


TM

V-Port I/O Cable Systems

100Ω differential pair signaling

Choice of 26 AWG MiniSkew LSP

or 30 AWG Shielded Twisted Pair cable

Standard Thumbscrews, optional

Reverse Polarization

Mates with VRDPC Series – keyed to

prevent accidental mating with common

VHDCI cable plugs

Rugged gedPanel&I/OInterfaces

Interfaces

LifeJack ® CAT3 Mod Jacks with

replaceable contact arrays also meet

CAT5 & CAT5e when used with proper

compensation scheme

High retention and standard retention

USB interfaces

High-Definition Multimedia Interfaces (HDMI)

Very High Density Interconnects (VHDCI)

Broad custom capabilities

Sealed Circular I/O Systems

Meet IP68 requirements for dust and

waterproof sealing

Ethernet, USB and Mini USB systems

Termination from panel to board via

standard Ethernet, USB and Mini

USB Cable

Sealed Circular Ethernet Field

Termination Kits for long haul applications

12


PANEL & I/O

IP68 Sealed Systems

AccliMate IP68 Sealed

Tiger Eye Systems

• Meet IP68 requirements for

dust and waterproof sealing

• Cable plugs and receptacles

with high reliability, high cycle

Tiger Eye Contact Systems on

1,27mm (.050") pitch

• Sealed Rectangular system with

choice of 10, 15 or 20 positions

• Sealed Circular system with

14 positions in size 10 shell

• Termination from panel-to-board

via Tiger Eye discrete wire

socket or terminal assemblies

(SFSD/TFSD Series) or with latching

socket assembly (SFSD-XR Series)

• Application Specific friction locking

feature available for mating with

TFML Series locking terminals

• Dust caps available (DCA Series)

• Additional Sealed Rectangular

systems, including RJ45, USB and

RF inserts, currently in development

SEALED CIRCULAR &

RECTANGULAR SYSTEMS

IP68-rated solutions for rugged

Tiger Eye Contact Systems

Termination from

panel-to-board via

Tiger Eye discrete

wire assemblies

Rugged Tiger Eye Contacts

for high cycles and reliability

TM

Additional insert options

include I/O, Power and

High Density

TIGER EYE

CONTACT SYSTEMS

• High reliability three-finger

BeCu contact system

• High mating cycles

• Multi-finger contact

Sealed Rectangular Tiger Eye,

RJ45, USB and RF systems in

development

Locking, latching and screw

down features available

Additional IP68-rated Sealed ed Systems:

High Speed I/O Systems

Ethernet and USB (SCPE/SCRES,

SCPU/SCRUS Series) systems in

Size 17 Shell

Mini USB systems in Size 10 Shell

Termination from panel-to-board

via standard Ethernet, USB and

Mini USB cables

Ethernet, USB and RF Sealed Rectangular

systems currently in design

Ethernet t Field Termination Kits

Power Mate & Mini Mate ®

Sealed IP68-rated Ethernet Field

Power Mate Sealed Circulars

Termination Kit (SCPFE Series) allows (SCP1/SCR1 Series) in Size 10 Shell

housings to be customer-installed after with 4 Power Pins or Size 17 Shell with

runs are complete

16 Power Pins

Ideal for long cable runs and small opening Mini Mate ® Sealed Circulars

applications

(SCP2/SCR2 Series) in Size 10 Shell

Contact Samtec for more information

with 10 High Density Pins or Size 17 Shell

with 32 High Density Pins

1


Service, Support & Testing

Power Integrity Services

• Standard power test data, including current

carrying capacity, working voltage, voltage

drop and resistance, is available for selected

power systems; for testing procedures, visit

www.samtec.com/powertesting

• Current Cycling Testing Data, which

demonstrates connector performance

in realistic and common applications, is

available for select series

Power Integrity guidelines are based on test

data and proven design parameters, and are

designed to help in connector selection and

PCB design maximization; for details, visit

www.samtec.com/powerintegrity

Power Integrity Certified products undergo

testing and additional requirements unique to

Samtec; to be certified, products must:

- pass Current Cycling Test EIA 365-55

- have current carrying capacity, resistance

and amps vs. number of contacts

data available

- have Power Integrity Guidelines developed

Visit www.samtec.com/powerintegrity for a

current list of Power Certified Products

Extended Life Products

• E.L.P. Series products are tested to rigorous

standards to evaluate contact resistance in

simulated storage and field conditions

• 10 year Mixed Flowing Gas (MFG) Testing

• High Mating Cycle Tests (250 to 2,500)

Online Resouces & Support

CERTIFIED

POWER INTEGRITY CERTIFICATION

Products must pass current cycling testing,

comprehensive power testing and have

Power Integrity Guidelines developed

EXTENDED LIFE PRODUCT

EXTENDED LIFE CERTIFICATION

Products undergo rigorous 10 year

MFG & High Cycle Testing

• Technical Library with power ratings, test

procedures, simulations and data reports

Power test reports including Current Cycling

Testing, CCC Data and Voltage Drop Data

• Guidelines for power distribution on PCB

• Specification summary charts for each

power product

Power/Signal Integrity Interface

Combination Selector

Power Group offers 24/7 support

TECHNICAL

LIBRARY & TOOLS

Power Ratings, Testing

Procedures, Reports &

Simulations

SUDDEN SERVICE

CERTIFIED

UNITED STATES • SILICON VALLEY

UNITED KINGDOM • GERMANY • FRANCE

ITALY • SWEDEN • ISRAEL

INDIA • SINGAPORE • JAPAN • CHINA

TAIWAN • HONG KONG • KOREA

AUSTRALIA / NEW ZEALAND

SOUTH AFRICA

More magazines by this user
Similar magazines