Packaged Audio Products - toa.cz

toa.cz

Packaged Audio Products - toa.cz

Packaged Audio Products

• SPEAKERS • MICROPHONES • Amplifiers • Mobile Amplifiers

• WIRELESS MICROPHONES • MIXERS

• CONFERENCE SYSTEMS

• MEGAPHONES


About TOA

Since its foundation in 1934 the TOA Corporation had a leading

effect upon the development of the acoustic and communication

technology. Among others TOA invented the Reflex Horn as well

as the Transistor Megaphone. Several patents and state of the art

products stand for an unequalled innovative company.

TOA operates in more than 100 countries worldwide. This branch,

TOA Electronics Europe, is responsible for the sales and distribution

of TOA Products throughout mainland Europe, Middle East and

Africa.

TOA's products range from amplifiers and speakers used in foreground

and background music systems, to mixers, wireless microphone

systems and digital processors used in sound reinforcement, to

intercom security systems.

This catalogue offers a selection of products for small and

intermediate-sized sound systems from these ranges:

- Public Address Systems

- Professional Sound Systems

For further information for the design of intermediate to large

sound systems please contact your local dealer. Such systems are

built-up with the Venas and Smart Matrix system components.

Dedicated to security applications the VX-2000 series fulfills the EN

60849 standard while the Smart Matrix System provides network

capability.

A basic demand in any kind of security application is a high grade

of intelligibility. And a good sound quality is an essential condition

for it.

Sound quality and safety are part of our concept: Safe & Sound.

Hotel

Showroom

Office Building


DIRECTORY

Microphones for Speech and Vocal 4

Hand-held Microphones

Microphones for Paging Use 6

Hand-held Microphones, Desk-top Microphones, Microphone Preamplifiers

Microphone Accessories 7

Goosenecks, Desk Stands, Floor Stands

Wireless Systems 8

UHF Band, Portable Amplifier, VHF Band

Sound Repeater 12

Amplifiers 13

Packaged Amplifiers, Mixer (active), Mobile Amplifiers

Ceiling Speakers 18

Flush Mount, Fire Dome, Surface Mount Speaker

Box Speakers 20

Universal Speakers, Box Speakers for Wall Mounting, Accessories

Wide Range and Column Speakers 22

Pendant Speakers, Projection Speakers for Indoor Use and

for Outdoor Use, Column Speakers

Horn Speakers 26

Horn Speakers, Paging Horn Speakers, Drivers, Reflex Horns, Accessories

Impedance Meter 29

Foreground Music Speakers 30

Harmonized Engineering Speakers, Wide-Dispersion Flush Mount

Ceiling Speakers, Accessories

High Quality Sound Speakers 33

Fashion Speakers for Foreground Music, Coaxial Array Speakers,

Compact Array Speakers, Mounting Brackets, Accessories

Conference Systems 40

Infrared Conference Systems, Wired Conference System

Megaphones 47

Hand-held Megaphones, Shoulder Type Megaphones

Technical Column 49

Know how: Microphones, Amplifiers, Speakers

Application Examples 51

Supermarket, Factory, Office, Gymnasium, Mosque, Church

Index 54


Microphones for Speech and Vocal

Speech

EM-400

Omnidirectional Microphone

• Highly sensitive electret condenser microphone with

high sound quality and excellent acoustic effects

• Low noise

• Low power FET ensures long operational life of

the semipermanent mercury battery

Model

Type

Directivity

Rated Impedance

Frequency Response

Cable Length

Switch

Power Source

Standard Operating Voltage

Continuous Operation

Dimensions

Weight

Accessory

EM-400

Electret Condenser Mic.

Omnidirectional

2 kΩ

50 -13,000Hz

5m with phone plug

Power ON/OFF switch

Mercury battery (Malory H-C /LR44)

1.3 V

100 hours

Ø 14 x 52 mm

140 g (with battery)

1 battery, 1 holder clip

DM-1100

Standard Dynamic Microphone



7,5m

• Dynamic hand-held microphone for general use

applications

• Rigid diecast aluminum microphone body

• Switching and handling noise suppression

• Fitted with 7.5 m phone plug cable

• Microphone holder provided as standard

accessory

W5/16”

DM-1200 / DM-1200D

Microphone for Speech

Speech and Vocal

DM-1300

Microphone for Speech / Vocal



W5/16”

10m

• Dynamic hand-held microphone for speech use

applications

• Rigid diecast zinc microphone body

• Switching and handling noise suppression

• DM-1200 : 10 m phone plug cable supplied with

unit

• DM-1200D: 5 m DIN-plug cable with remote control

function to activate amplifiers power or a chime for

PA systems

• Microphone holder provided as standard

accessory

• Balanced output for long distance connection

W5/16”

10m


• Dynamic hand-held microphone for vocal/speech use

applications

• Rigid diecast zinc microphone body

• Switching and handling noise suppression

• 10 m phone plug cable supplied with unit

• Microphone holder provided as standard

accessory

• Balanced output for long distance connection

Model DM-1100 DM-1200 DM-1200D DM-1300

Type

Dynamic microphone (Moving-coil microphone)

Directivity Cardioid Cardioid Cardioid Cardioid

Rated Impedance 600 Ω unbalanced 600 Ω balanced 600 Ω balanced 600 Ω balanced

Rated Sensitivity* -55 dB -55 dB -55 dB -54 dB

Frequency Response 100 -12,000 Hz 50 -12,000Hz 50 -12,000 Hz 70 -15,000 Hz

Talk Switch ON/OFF switch ON/OFF switch ON/OFF switch ON/OFF switch

Dimensions Ø 55 x 178 mm Ø 39.5 x 163 mm Ø 39.5 x 163 mm Ø 51 x 170 mm

Weight 155 g (without cable) 265 g (without cable) 265 g (without cable) 245 g (without cable)

Standard Accessory 7.5 m cable, phone plug 10 m cable, phone plug 5 m cable, DIN plug 10 m cable, phone plug

Mic Holder (W5/16”) Mic Holder (W5/16”) Mic Holder (W5/16”) Mic Holder (W5/16”)


*(0 dB=1 V/ Pa)


Vocal

DM-1500

Microphone for Vocal















• Suitable for vocal and speech application

• Robust die-cast zinc microphone body

• Short type slide On/Off switch reduces handling noise

• XLR-connector (balanced) and 10 m cable with phone plug

• Adapter for stand mount is provided






Gooseneck Microphones

DM-524S DM-524B ST-73A

Gooseneck Microphone Gooseneck Microphone Desk Stand for

with built-in On/Off switch

DM-524B / DM-524S





10

100

123

58









DM-524B

ø165

• Flexible goosenecks

ST-62

• For lecture desk or for paging

• Suppresses handling noise

• DM-524S has a built-in On/Off switch

• 600 Ω impedance (balanced)

• 3-pin connector

• Microphone can be used in conjunction with

ST-73 Stand

ø165

ST-73

• 3-pin receptacle

• Height 58.5 mm















DM-524S


Model DM-1500 DM-524B DM-524S

Type Dynamic microphone Dynamic microphone Dynamic microphone

Directivity Cardioid Cardioid Cardioid

Rated Impedance 600 Ω balanced 600 Ω balanced 600 Ω balanced

Rated Sensitivity* -56 dB -56 dB -56 dB

Frequency Response 70 -15,000 Hz 100 -10,000 Hz 100 -10,000 Hz

Talk Switch ON/OFF switch – ON/OFF switch

Dimensions Ø 40.5 x 173 mm Ø 40 x 532 mm Ø 40 x 557 mm

Weight 280 g (without cable) 465 g 475 g

Standard Accessory 10 m cable, phone plug, Mic Holder (W5/16”) 3-pin connector ø 21 3-pin connector ø 21

*(0 dB=1 V/ Pa)


160

157






Microphones for Paging Use

Hand-held Microphones

PM-222

Unidirectional Paging Microphone

PM-120

Unidirectional Paging Microphone








• Cost effective paging microphone

38 44

• Hand-held type with push-to-talk switch with lock

• Coiled 1-core shielded cable, 2 m long with phone plug


• General-use paging microphone with heavy-duty

46 33

metallic body. Effective in high ambient noise areas

• Hand-held type with push-to-talk switch with lock

• Coiled 1-core shielded cable, 2.5 m long with phone plug

Model PM-222 PM-120

Type

Dynamic microphone (moving-coil microphone)

Directivity

Unidirectional

Rated Impedance 600 Ω, unbalanced 250 Ω, unbalanced

Rated Sensitivity* -47 dB –

max. 2.5 m

Frequency Response

max. 2 m

100-10,000 Hz 50 -12,000 Hz

Cables

Coiled, 1-core shielded cable

Talk Switch

Push-to-talk switch with lock

Dimensions (W x H x D) 44 x 160 x 38 mm 46 x 157 x 33 mm

Finish ABS resin, gray Champagne gold (front), bla

Weight 200 g 230 g

Microphone Hanger Standard accessory Optional (model 2202)

Desktop Type Microphones

PM-660

Paging Microphone

with Phone Jack

PM-660D

Paging Microphone

with DIN-Connector

EC-100M

Chime Microphone

















Phone Plug



DIN Plug




• Large talk switch with locking lever

• Fitted with 2.5 m, 1-core shielded

cable

• Large talk switch with locking lever

• Extra switch contact for remote control

• Fitted with 2.5 m, 2-core shielded

cable and DIN plug

• Built-in 4-tone electronic chime unit

• 2 batteries (AA-type) required

• 2 m phone plug to phone plug cable

supplied with unit

• 2 Push-buttons

Model PM-660 PM-660D EC-100M

Rated Impedance 600 Ω, unbalanced 600 Ω, balanced 600 Ω, unbalanced

(Sensitivity 0 dB=1 V / Pa) -58 dB -58 dB Microphone: -53 dB

Chime signal: -45 dBV

Frequency Response 100 -10,000Hz 100 -10,000 Hz –

Talk Switch Push-to-talk switch type (short-off circuit, with lock lever) Push ON - Push OFF

Remote Control – Make contact –

(interlocked with talk switch)

Power Requirements – – DC 3 V (AA-type battery x 2 pcs)

Finish Head: Zinc plated steel wire, baked painting, gray / Body: ABS resin, gray Metallic gold (stand base)

Dimension (W x H x D) 100 x 215 x 150 mm 100 x 215 x 150 mm 112 x 313 x 150 mm

Weight 440 g 440 g 770 g

*(0 dB=1 V/ Pa)


Amplifier Control Unit for Long Distance Connection

RU-2001

Amplifier Control Unit for microphones with DIN plug

(e.g. PM-660D, DM-1200D)

RU-2002

Amplifier Control Unit with Chime Signal for microphones with

DIN plug (e.g. PM-660D, DM-1200D)

Model RU-2001 RU-2002

Power Requirements

12-24 V DC

Current Consumption

60 mA

Mic. Input

-62 dBV, 600 Ω, unbalanced

Output

0 dBV, 600 Ω, balanced

Signal - 4-tone / 2-tone / single tone chime or

gong sound (selectable)

Dimensions (W x H x D)

124 x 42.5 x 159 mm

Weight

700 g

Finish

Steel color plate, black

A-2000

Microphone Stands

Desk Stands

Floor Stands

Goosenecks

ST-65A

Height 120 ~ 175 mm

Clip type microphone

holder (W5/16” thread)

ST-311B

Height 101 - 172 cm

with boom

3/8” and 5/16” Adaptor

ST-506

Length 150 mm

5/16" thread

ST-507

Length 300 mm

5/16" thread

ST-66A

Height 220 - 347 mm

Clip type microphone

holder (W5/16” thread)

ST-312B

Height 94 - 161 cm

3/8” and 5/16” Adaptor

YM-121

Length 367 mm

Flexible Shaft for ST-73A

3-pin receptacle

Input receptacle XLR-3-11C

Information

Connectors

XLR Connectors

Female (F)

XLR-3-11C

Male (M)

XLR-3-12C

XLR-3-13

Panel Jack, round

XLR-3-14

Panel Jack, round

XLR-3-31

XLR-3-32

DIN Connectors

Phone Plugs

Panel Jack, rectangular

Panel Jack, rectangular

5 P DIN Plug 8P DIN Plug

Phone Plug

(Unbalanced)

Phone Plug

(Balanced)


Wireless Systems

UHF-Band

• UHF system with low noise interference

• Triple squelch and diversity system supports a clear reception

• Good distance coverage from microphone to tuner (up to 150m on an open space)

• 16 channels or 64 channels selectable

• The system is comprised of a microphone and a matching receiver

Hand-held Wireless Microphones

WM-5220

WM-5270

Microphone (Speech & Vocal) Microphone (Speech & Vocal)

16 channel 64 channel

Wireless Lavalier Microphones

WM-4210

Microphone (Speech & Vocal)

16 channel

WM-4200

Microphone (Vocal)

64 channels

WM-5320 WM-5320H WM-5320A

Lavaliere Microphone Headset Microphone Aerobic Set, sweat resistant, with headset, pouch

• Microphones designed for speech and for vocal applications

• 2 kinds of microphone: hand-held or bodypack transmitters

with lavalier microphone

• Streamlined, thinner profile compared to conventional

models, thanks to a new built-in antenna

• Wide-area receptivity

• At-a-glance indicator warns of low battery status

• Average operation exceeding 10 hours

• Weight reduced

• Headset types and units optimized for aerobics applications

• PLL-synthesized circuitry oscillation enhances carrier frequency

stability and reliability

Microphones for vocal applications feature

• Flat frequency response

• Dynamic cardioid capsules

• High input levels without overloading

Microphones for speech applications feature

• Optimized on intelligibility. These microphones employing

electret condenser element for minimized handling noise

Model WM-4210 WM-5220 WM-5270 WM-4200

Microphone Capsule Dynamic, cardioid Electret condenser, cardioid Dynamic, cardioid Dynamic, cardioid

Frequency Range 794 - 865MHz 794 - 865 MHz 794 - 865 MHz 794 - 865 MHz

No. of Channels 16 16 64 64

Battery 9V (6LR61) AA (LR6) AA (LR6) 9V (6LR61)

Batteriy Life Time >10 h >10 h >10 h >10 h

Indicators On, battery status On, battery status On, battery status On, battery status

Antenna Integrated Integrated Integrated Herical Antenna

Operating Temperature - 10°C ... 50°C -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C

Finish ABS Resin coated Resin, rubber coating Resin, rubber coating Resin, rubber coating

Dimensions (W x H x D) ø50 x 235.2 mm ø43.6 x 231.5 mm ø48 x 244 mm ø52.2 x 279.4 mm

Weight 270 g (incl. battery) 180 g (incl. battery) 340 g ( incl. battery) 300 g ( incl. battery)

Accessories Stand adaptor, storage Stand adaptor, storage Pouch, microphone holder, Pouch, stand adaptor, storage

case, screw driver case, screw driver rolling stopper, screw driver case, screw driver

Model WM-5320 WM-5320A/ WM-5320H

Microphone Capsule Electret condenser, omnidirect. Electret condenser, cardioid

Frequency Range 794 - 865 MHz 794 - 865 MHz

No. of Channels 64 64

Battery AA (LR6) AA (LR6)

Batteriy Life Time >10 h >10 h

Indicators On, battery status On, battery status

Antenna Integrated Integrated

Operating Temperature -10°C ... 50°C -10°C ... 50°C

Finish Resin coating Resin coating

Dimensions (W x H x D) 62 x 102.5 x 23 mm 62 x 102.5 x 23 mm

Weight 110 g ( incl. battery) 90 g ( incl. battery)

Accessories Screw driver, storage case, Waist pouch (WM-5320A), screw driver,

neck strap

neck strap


Wireless Tuner

WT-5800

WT-5805

True Diversity Tuner

Space Diversity Tuner

64 channels 64 channels

WT-5810

Portable Tuner

WT-4820

Diversity Tuner

for 2 UHF Modules

• UHF system which ensures low noise interference

• Triple Squelch and Diversity System supports a clear reception

• Good distance coverage from microphone to tuner (up to 150m

on an open space)

• 16 / 64 channels

• Mixng input allows cascadation of several receivers (WT-5810)

• Two built-in antennas (WT-5810)

• Matching with WM-5220 / 5320 / 5320A / 5320H / 5270

and WM-4210 microphones

• WT-4820 rack mountable with optional mount brackets: MB-WT3

(for one WT-4820) or MB-WT4 (for two WT-4820 side by side)

• WT-4820 accepts two optional wireless tuner modules WTU-4800

WTU-4800

Tuner Module for

WA-1822, WT-4820,

ER-2930W and MX-628

Model WT-5800 WT-5805 WT-5810 WT-4820 WTU-4800

Power Supply 230 V 50 Hz (AC adaptor) 230 V 50 Hz (AC adaptor) 230 V 50 Hz (AC adaptor) 12- 18 V DC 7-12 V DC

Current Consumption 250 mA (12 V DC) 200 mA (12 V DC) 130 mA (12 V DC) 250 mA (12 V DC) 100 mA

Receiving Frequency 682 - 865 MHz 682 - 865 MHz 682 - 865 MHz 690 - 870 MHz 794 - 830 MHz

No. of Channels 64 64 16 16 16

Indicators 5 5 4 3 -

Dynamic Range > 110 dB > 110 dB > 104 dB > 102 dB >80 dB

Distorsion < 1% < 1% < 1% < 1% < 1%

Frequency Response 100 - 15,000 Hz, ±3 dB 100 - 15,000 Hz, ±3 dB 100 - 15,000 Hz, ±3 dB 50 - 18,000 Hz, ±3 dB 100 - 12,000 Hz, ±3 dB

Operating Temperature -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C

Finish ABS resin, black ABS resin, black ABS resin, black ABS resin, black Steel case

Dimensions (W x H x D) 210 x 44 x 205.1 mm 210 x 44 x 205.1 mm 206 x 40.6 x 152.7 mm 210 x 44 x 181 mm 60 x 25 x 139 mm

Weight 700 g 700 g 590 g 770 g 130 g

Accessories

YW-4800

UHF Wireless Antenna

Active antenna with attenuation switch, for

wall-mounting

WD-4800

Power Antenna Distributor

2 antenna inputs, 4 antenna outputs and 4 DC power outputs. The antenna

outputs are distributed to the tuner for maximum coverage area and effective

clear sound. Rack mountable with optional mount brackets (MB-15B)

MB-WT3: 19“-Rack-mount Bracket Kit

for 1 WT-4800, consists of 2 brackets,

blank box and connector

MB-WT4: Rack-mount Bracket Kit for

2 WT-4800, consists of 2 brackets and

connector

MB-15B: Rack-mount Bracket

for WD-4800


Wireless Microphone Sets

UHF 5000 Series

Microphone / Tuner Sets

WS-5200 WS-5300 WS-5300H

Wireless Set Wireless Set Wireless Set

(WM-5220 and WT-5810) (WM-5320 and WT-5810) (WM-5320H and WT-5810)

UHF 200 / 300 Series

Microphone / Tuner Sets

• Operating range : 3 – 120 m

• Four switchable UHF transmission/receiving frequencies

ensure noise-free operation

• Diversity tuner technology for reliable reception

• Dynamic processor provides optimally clear sound

WS-200 WS-300 WS-300H • Adjustable squelch feature eliminates unwanted noise

Wireless Set Wireless Set Wireless Set

Hand-held Microphone + Tuner Lavalier Microphone + Tuner Headset Microphone + Tuner

Model (Microphone) WS-200 WS-300 WS-300H

Microphone Capsule Dynamic, Electret condenser, Electret condenser,

unidirectional omnidirectional unidirectional

Frequency Range UHF UHF UHF

No. of Channels 4 4 4

Battery 6 (LR61) 6 (LR61) 6 (LR61)

Battery Life Time approx.10 h approx.10 h approx.10 h

Indicators Battery status Battery status Battery status

Mic Input Connector - ø 3.5 mini jack ø 3.5 mini jack

Finish Resin coating Resin coating Resin coating

Dimensions (W x H x D) ø50 x 272 mm 62 x 102 x 31.5 mm 62 x 102.5 x 31.5 mm

Weight 220 g 90 g ( incl. battery) 90 g ( incl. battery)

Model

Tuner

Power Supply

230 V 50 Hz (AC adaptor)

Current Consumption

100 mA (12 V=)

Receiving System

Double super-heterodyne

Antenna

Rod antenna

Indicators 4

S/N Ratio

> 95 dB

Distorsion < 1%

Frequency Response

100 - 15 000 Hz, ±3 dB

Operating Temperature -10°C ... 45°C

Finish

ABS Resin, grey

Dimensions (W x H x D) 214 x 35 x 100.5 mm

Weight

580 g

Portable Amplifier

WA-1822 / WA-1822C

Meeting amplifier with (WA-1822C) and without (WA-1822) cassette drive

Both with speaker and two optional wireless microphone channels

• Ideal for mobile PA: Portable amplifier

for schools, conferences, entertainment, etc.

• Selectable source: AC or battery operation

• Battery status indication

• Rated power 20 W and 2-way speaker

• Operation with wireless microphones with up to two optional

tuner modules WTU-4800 (UHF) or WTU-3800 (VHF)

• 2 built-in antennas

Model

WA-1822 / 1822C

Power Supply

230 V~, 50 Hz or dry cell: 8 x

Rated Power

AC: 20 W; Battery: 8 W

Power Consumption

44 W (rated output)

Frequency Response

70…10,000 Hz

Distortion < 1%

Inputs

1 wired MIC: -48 dBV, 600 Ω, AUX: -20 dBV, 10 kΩ

Speaker

20 cm Bass + Horn or external: 8 - 16 Ω min. 20 W

S/N Ratio

> 70 dB

Operating Temperature -10 - 50°C

Dimensions (W x H x D) 298 x 460 x 200 mm

Weight

6 kg

Finish

White

Applicable Room Size

Application

Room size

Class room

8 x 14 m

Conference room 8 x 10 m

Outdoor

15 x 15 m

Church

10 x 15 m

Gymnasium 15 x 15 m

10


VHF-Band

WT-3800

VHF Tuner

WT-3810

Portable VHF Tuner

WTU-3800

Tuner odule for WA-1822/C

• Double squelch and diversity system supports a clear

reception

• Good distance coverage from microphone to tuner (within

150m at an open space)

• 6 channels

• Mixing input allows cascadation of several receivers (WT-

3810)

• Two built-in antennas (WT-3810)

Audio mixing input (WT-3800)

• Applicable microphones WM-3210 / WM-3220 / WM-

3310 / WM-3310H

Model WT-3800 WT-3810 WTU-3800

Power Supply 230 V, 50 Hz (AC Adaptor) 230 V, 50Hz (AC Adaptor) 7-12 V DC

Current Consumption 150 mA (13.8 V DC) 150 mA (13.8 V DC) 100 mA

Receiving Frequency 169 - 216 MHz 169 - 216 MHz 169 - 216 MHz

No. of Channels 6 6 6

Indicators 3 3 -

Dynamic Range > 100 dB > 100 dB > 80 dB

Distortion < 1% < 1% < 1%

Frequency Response 100 - 12,000 Hz, ±3 dB 100 - 12,000 Hz, ±3 dB 100 - 12,000 Hz, ±3 dB

Operating Temperature -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C

Finish ABS resin, black ABS resin, black Steel

Dimensions (W x H x D) 210 x 44.2 x 181 mm 240 x 35 x 110 mm 60 x 25 x 139 mm

Weight 600 g 380 g 130 g

Wireless Microphones

WM-3210 WM-3220 WM-3310 WM-3310H

Microphone (Speech & Vocal) Microphone (Speech) Lavaliere Microphone Headset Microphone

Model WM-3210 WM-3220 WM-3310 WM-3310H

Microphone Dynamc Cardioid Electret Condenser, Cardioid Electret Condenser, Cardioid Electret Condenser, Cardioid

Frequency Response 169 - 216 MHz 169 - 216 MHz 169 - 216 MHz 169 - 216 MHz

No of Channels 6 6 6 6

Battery 9 V (6LR61) 9 V (6LR61) 9 V (6LR61) 9 V (6LR61)

Battery Life Time >10 h >10 h >10 h >10 h

Indicators On, battery status On, battery status On, battery status On, battery status

Antenna Integrated Integrated Herical antenna Herical antenna

Operating Temperature -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C -10°C ... 50°C

Finish ABS resin coated ABS resin coated ABS resin coated ABS resin coated

Dimensions (W x H x D) ø50 x 235.2 mm ø45 x 235.2 mm 62 x 142 x 32 mm 62 x 142 x 32 mm

Weight 250 g (incl. battery) 250 g (incl. battery) 135 g ( incl. battery) 135 g ( incl. battery)

Accessories Stand adaptor, screwdriver Stand adaptor, screwdriver Screwdriver Screwdriver

Accessories

YW-3800

VHF Wireless Antenna

Dipole antenna for wall-mounting, 75 Ω output impedance

11


Sound Repeater

Both sound repeaters are featuring digital circuitries. Easy recording of announcements, allowing the user to overwrite

mistakes until an announcement is perfect. Recording with CD-quality and maintenance-free use. An Automatic Gain

Control (AGC) is built-in to eliminate differences in recording levels. Punctuating announcements with chimes possible.

EV-20R

Sound repeater for recording and playback of prerecorded

announcements

PM-20EV

Microphone with sound repeater for recording

and playback

• For supermarkets and department stores with a distributed

speaker system

• Up to 4 separate message selections or announcements

to a total maximum of three minutes may be recorded

Front panel-mounted recording inputs (mic./line switchable)

• PC connection via USB. A CD Rom with various chimes is

included

• Pre-recorded message can be transferred via USB-Interface.

• Built-in interval timer allows messages to be repeated

at various time intervals (0.5 seconds up to ∞)

• 3 W / 8 Ω amplifier section built-in for direct speaker

connection. Volume control for level adjustment of an external

source

• A line input and output for connecting various program

sources including CD players or dedicated BGM units

• For locally recorded advertisements

• A microphone is included as standard

equipment for recording and making

announcements

• Built-in monitor speaker allows checking

announcements before broadcasting

• Automatic chime for marking the start and

end of an announcement

• PC connection via USB possible

• A CD Rom with various chimes is included

• Pre-recorded message can be transferred via

USB-Interface

Model EV-20R PM-20EV

Power Requirements 24 V DC / 400 mA 24 V DC / 200 mA

or from AD-246 AC adapter

or from AD-246 AC adapter

Power Consumption 10 W 5 W

Frequency Response 20 - 20,000 Hz ±3dB (1kHz) 50 - 20,000 Hz ±3dB (1kHz)

Input Input / recording input: Uniderectional gooseneck microphone /

Mic: -60 dBV, 2.2 kΩ, Line: -20 dBV, 10 kΩ

external Mic: -37 dBV, 2.2 kΩ, unbalanced, mini jack

unbalanced phone jack

Line Input: 0 dBV, 10 kΩ, removable terminal block

Control Input 10 mA removable terminal block

Output Line: 0 dBV, 60 Ω, unbalanced, removable terminal block Line: 0 dBV, 600 Ω, balanced, phone jack, removable terminal block 7-p

Headphone: 0 dBV, 100 Ω unbal. phone jack

Monitor speaker (built-in): 0.2 W

Speaker: 3 W, 8 Ω, removable terminal block

Control: removable terminal block

Messages Playback intervals: ∞, 0 s, 5 s, 10 s, 30 s, Delay: 0, 2 or 4 sec.

1 / 4 / 10 / 30 min or 1 h (selectable) Recording time: max. 6 min., 1 message

Delay: 0, 2 or 4 sec.

Recording time: max. 3 min., max. 4 messages

Dimensions (W x H x D) 210 x 44.2 x 181 mm 122 x 48.8 x 180 mm

Weight 730 g 710 g

Finish ABS resin, black ABS resin, silver

Accessories CD-ROM, unbalanced phone plug, USB cable, CD-ROM, unbalanced phone plug cord (2 m),

removable terminal block (22-p)

USB cable, removable terminal block (7-p)

Optional: AD-246 adaptor

Optional: AD-246 AC adaptor

MB-WT3 Rack-mount kit for 1 device

MB-WT4 Rack-mount kit for 2 devices

12


Amplifiers

A-2000 Series Packaged Amplifiers

A-2030 (30 W) / A-2060 (60 W) / A-2120 (120 W) / A-2240 (240 W)

H / CE Version

• Cost effective and durable mixer power amplifier

• User friendly front panel allows easy operation

• 3 electronically balanced microphone inputs,

2 AUX inputs and recording output

• Phantom power at MIC 1

• Improved cost-performance level

• Wide tone-control adjustment range of ±10dB for

both bass and treble

• Operation on either 230 V AC or 24 V DC

• 100 V / 70 V line or 4 Ω speaker outputs

• Booster amplifier for additional power

• 2-unit size

• Colour: black

• H Version: Mic 1 has phone plug

• CE Version: Mic 1 has DIN plug + mute function

Connection Example

Speakers

Auto announcement

machine

CD player

A-2120 (H version)

Rear: A-2120 CE

Dynamic microphones

Electret condenser

microphone

Booster amplifier

P-2240 (240 W)

Speakers

P-2240 Booster Amplifier (240 W)

• 240 W output power

• 100 V line input allows connection to speaker output of

A-2000 series amplifiers

• Remote power control allows operation independently

from A-2000 series amplifiers

• Emergency bypass of master volume

• H Version (not available in the EU), featuring a master

volume bypass function

• 2 height units

• Colour: black

Model A-2030 A-2060 A-2120 A-2240 P-2240

Power Requirement 220~240 V AC / 24 V DC 220~240 V AC / 24 V DC 220~240 V AC / 24 V DC 220~240 V AC / 24 V DC 220~240 V AC / 24 V DC

Output 30 W rated, max. 45W 60 W rated, max. 90 W 120 W rated, max. 180 W 240 W rated, max. 360 W 240 W rated, max. 360 W

Power Consumption 34 W 72 W 124 W 238 W 238 W

Frequency Response

50 - 20,000 Hz, ± 3 dB

Distortion

< 1% at 1 kHz, 1/3 rated power

Tone Control

Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz

S/N Ratio

better than 60 dB

Speaker Output

100 V, 70 V line, 4 Ω

Input Mic 1,2,3: -60 dBV, 600 Ω, electronically balanced, Mic 1: 5-p DIN (CE Version) or phone jack (H version) , Line In: 0 dBV, screw terminal

Mic 2,3: phone jack

Speaker Line In: 40 dBV,

Mute: contact pin 4 - 5 closure input (for Mic 1)

screw terminal

Aux 1,2 : -20 dBV, 10 kΩ, unbalanced, RCA pin jack

Protection Circuit

Current limiter, thermal protection, AC and DC fuse

Muting Function MIC 1 overrides other input signals with 0~30dB attenuation –

Finish

Front panel: ABS resin, black / Case: Steel plate, black paint

Dimensions (WxHxD) 420 x 101 x 280 mm

420 x 101 x 360 mm

Weight 5 kg 7 kg 10.8 kg 13.2 kg 13.2 kg

13


220-230V 0.4A 50/60Hz

PA AMPLIFIER

model A-1806

OUTPUT RATED 60W

ENGINEERED IN JAPAN, ASSEMBLED IN CHINA

220-230V 0.4A 50/60Hz

PA AMPLIFIER

model A-1806

OUTPUT RATED 60W

ENGINEERED IN JAPAN, ASSEMBLED IN CHINA

0

-

0

-

10

+

10

+

-

-

+

+

TOTAL IMPEDANCE 167›

INPUT

DIRECT ZONE2 ZONE1

- +24V C C 4‚164› 100V 100V 100V

TOTAL IMPEDANCE 167›

INPUT

DIRECT ZONE2 ZONE1

- +24V C C 4‚164› 100V 100V 100V

REMOTE OUT CONTROL MOH OUT EMERGENCY TEL PAGING

EMER-

H

+ - - TEL G C C H G C H

GENCY

600›

REC OUT LINE OUT

REMOTE OUT CONTROL MOH OUT EMERGENCY TEL PAGING

EMER-

H

+ - - TEL G C C H G C H

GENCY

600›

REC OUT LINE OUT

0 10 0 10 0 10 0 10 0

0 10 0 10 0 10 0 10 0

1

2

1

2

10

10

MOH

MOH

EMER- TEL

GENCY PAGING

AUX 1

AUX 3 AUX 2 (MOH) MIC 3

EMER- TEL

GENCY PAGING

AUX 1

AUX 3 AUX 2 (MOH) MIC 3

CHIME

BLANK

CHIME

CHIME

BLANK

CHIME

0

0

MIC 2

MIC 2

10

10

SW6 MIC 3

SW7 MIC 2

SW8 MIC 1

SW6 MIC 3

SW7 MIC 2

SW8 MIC 1

0 dB

-6

-12

-18

-24

0 dB

-6

-12

-18

-24

CHIME

SW2 SW3

4 TONE OFF OFF

2 TONE ON OFF

1 TONE OFF ON

NONE ON ON

MIC 1

MIC 1

SELECTOR

CHIME

SW2 SW3

4 TONE OFF OFF

2 TONE ON OFF

1 TONE OFF ON

NONE ON ON

MIC 1

MIC 1

SELECTOR

ON

OFF

ON

OFF

Mixer Power Amplifiers A-1800 Series

A-1803 (30 W) / A-1806 (60 W) / A-1812 (120 W) / P-1812 (120 W)

TOA Corporation

A-1803 / A-1806 / A-1812

MUTE BY TEL SIG

MUTE BY MIC 1 SIG

PHANTOM

P-1812 (Booster Amplifier)

TOA Corporation

SP OUT

OUTPUT

INPUT

MUTE BY TEL SIG

MUTE BY MIC 1 SIG

PHANTOM

SP OUT

OUTPUT

INPUT

420

18.5

18.5

MIC 1

BASS

MIC 1

BASS

MIC 2

MIC 3

AUX 1

AUX 2 AUX 3

TREBLE

TREBLE

420

MIC 2

MIC 3

AUX 1

AUX 2 AUX 3

367

326.5

367

326.5

ZONE 1

ZONE 2

ZONE 1

ZONE 2

MASTER

MASTER

EMERGENCY

POWER

TEL

PA AMPLIFIER model A-1806

EMERGENCY

POWER

TEL

PA AMPLIFIER model A-1806

88.4

88.4

107.7

107.7

• Matching the needs for a small PA-system with

emergency function, 2 speaker zones and all-call

• 3 microphone inputs, 2 AUX-inputs, telephone- and

priority input

• Emergency call even if the amplifier is switched off

• 3 Priorities: emergency, telephone or paging microphone

(MIC1) with priority overriding

• All call from telephone

• Recording output

• Speaker outputs with screw terminals

• Selectable chimes

• Connection of a 120 W booster amplifier P-1812 possible

Connection Example

Column Speaker

Speaker

Horn

Speaker

CD

Wireless

Receiver

Cassette Player

Cassette Player

Mics

PBX

H

C

Speaker

Booster Amp

TRUNK

BOX

System Expansion

Paging Microphone

PM-660

Connection of a

Telephone System

Model

Power Source

Rated Output

Distortion (THD)

Frequency Response

Tone Controls

Outputs REC

LINE

Speaker Selection

Direct Out

Inputs MIC 1

MIC 2 - 3

AUX 1 (MOH)

AUX 2

AUX 3

Tel

Emergency

Line

Operating Temperature

Finish

Dimensions (W x H x D)

Weight

A-1803 A-1806 A-1812 P-1812

220-240 V AC 50/60 Hz, 24 V DC (screw terminal)

30 W 60 W 120 W 120 W

< 2% at 1kHz

50 – 15,000 Hz

Bass: ±10 dB at 100 Hz / Treble: ±10 dB at 10 kHz

0 dBV, 600 Ω, RCA jacks

0 dBV, 600 Ω, RCA jacks

2 zone, high impedance, individual selector switch, screw terminal

High impedance, screw terminal

Low impedance, 4 Ω, screw terminal

–60 dBV, 600 Ω, combination (XLR/Phone), DIN (5P)

–60 dBV, 600 Ω, combination (XLR/Phone)

–20 dBV, 10 kΩ, RCA jacks

–20 dBV, 10 kΩ, RCA jacks

–20 dBV, 10 kΩ, combination (XLR/Phone)

–20 dBV, 10 kΩ, screw terminals

0 dBV, 600 Ω, screw terminals

-

-10°C to 40°C

Front Panel: ABS resin, black Case: Black steel plate

420 x 107.7 x 367 mm

8.1 kg 9.4 kg 12.6 kg

50 – 20,000 Hz (±3 dB)

-

-

0 dBV, 600 Ω, RCA jacks

-

-

-

-

-

-

-

-

0/-10 dBV,10 kΩ, RCA jacks

-10°C to 40°C

420 x 107.7 x 367 mm

12.2 kg

14


220-230V 0.4A 50/60Hz

0 10

C

0

PA AMPLIFIER

model A-1706

OUTPUT RATED 60W

ENGINEERED IN JAPAN, ASSEMBLED IN CHINA

C

4â164

TOTAL IMPEDANCE 167

DIRECT

100V

ZONE2

100V

ZONE1

100V

10 0 10

REC OUT

- + - + 0 10 0 10 0

0

LINE OUT AUX 5 AUX 4 AUX 3

PWR AMP IN

REMOTE

VOLUME

10 0 10 0

C

H

POWER

REMOTE

-

10

10

+

MIC 6/AUX 2

MIC 5/AUX 1

OFF

ON

MIC 4

0

MIC6/AUX2

SW1

MIC 6

AUX 2

10

MIC5/AUX1

MIC 3

SW2

MIC 5

AUX 1

MIC 6

SW3

OFF

ON

-6

-12

-18

-24

MIC 5

SW4

OFF

ON

MIC 2

0 dB

PHANTOM

MIC 4 MIC 3

SW5 SW6

OFF OFF

ON ON

MIC 2

SW7

OFF

ON

MIC 1

MIC 1

SW8

OFF

ON

ON

OFF

Microphone Mixing Amplifiers A-1700 Series

A-1706 (60 W) / A-1712 (120 W) / A-1724 (240 W)

• 6 microphone and 5 AUX-inputs offer

excellent flexibility, simultaneous use of 9 inputs possible

• AUX 3 and AUX 4 are stereo inputs

• Input 5 and 6: Switchable mic or line level

• An equalizer may be inserted before the power

amplification stage

• For easy recording each A-1700 is equipped with

REC OUT connectors

• 2 speaker zones can be accessed or all-call

• Remote control of volume

• Remote power-on

TOA Corporation

Connection Example

SP OUT

OUTPUT

INPUT

420

Column Speaker

Speaker

Horn

Speaker

Tape Recorder (REC OUT )

Equalizer

MIC 1

BASS

MIC 2

TREBLE

MIC 3

MIC 4

AUX 3

MIC 5/AUX 1

AUX 4

MIC 6/AUX 2

AUX 5

ZONE 1

ZONE 2

MASTER

POWER

PA AMPLIFIER model A-1706

88.4

107.7

367

18.5

326.5

Cassette Player

CD (AUX 4 )

Cassette Player (AUX 3)

Microphones

* sensitivity selectable: Mic / Aux Level

Model A-1706 A-1712 A-1724

Power Source

220-240 V AC 50/60Hz

Rated Output 60 W 120 W 240 W

Distortion (THD)

Less than 2% at 1 kHz

Frequency Response

50 – 20,000 Hz (±3 dB)

Tone Controls

Bass: ±10 dB at 100 Hz / Treble: ±10 dB at 10 kHz

Outputs Speaker

High Impedance 100 V Line: 83 Ω, Low Impedance: 4 Ω

Recording Outputs

0 dBV, 600 Ω, RCA jacks

Line Outputs

0 dBV, 600 Ω, RCA jacks

Inputs MIC 1 – 4

–60 dBV, 600 Ω, electrically balanced, combination (XLR/Phone)

MIC 5 – 6*

–60 dBV, 600 Ω, electrically balanced, combination (XLR/Phone)

AUX 3 – 4

–22 dBV, 10 kΩ, RCA pin jacks (stereo)

AUX 5

–22 dBV, 10 kΩ, combination (XLR/Phone) (monaural)

Operating Temperature -10°C to 40°C

Finish

Front Panel: ABS resin, Hearline black Case: Black steel plate

Dimensions (W x H x D)

420 x 107.7 x 367 mm

Weight 9.3 kg 12.6 kg 13.5 kg

1515


Powered Mixer

MX-628

Compact sized 8-Channel Stereo-Mixer with built-in amplifier

• Featuring many functions and versatile expansion options for easy and fast setup

• For mobile or fixed installation e.g. in clubs, banquet rooms or schools, etc.

• 6 microphone inputs with trim controls, 2 stereo inputs for CD or cassette player

and 2 speaker outputs with 60 W each.

• Slot for optional VHF / UHF receiver modules (WTU-3800 / WTU-4800) for the use

with two wireless microphones ( 2x YW-3510 wireless antennae required)

• One effect- and foldback control per channel

• Output level with 4 bargraph LED level meters

• Sum outputs with bass- and treble controls

Model

Power Requirements

Power Consumption

Microphone Inputs

Aux Inputs

Effect-Input

Speaker Outputs

Outputs

Maximum Voltage Gain

Frequency Response

Equiv. Noise (20 - 20,000 Hz BPF)

Max. Gain

Equalizer

Indicator

Finish

Dimensions (W x H x D)

Weight

Accessories (Option)

MX-628

AC mains, 50/60 Hz

280 W (rated output)

6x: -66 ... -30 dBV, 600 Ω, balanced, input 1-4: XLR + phone jack, 5-6: phone jack

2x: Stereo: -10 dBV, 10 kΩ, RCA pin jack

1x: -10 dBV, 10 kΩ, phone jack

2x 60 W, 4Ω (0,5% THD, 1 kHz), push-in terminal

Line out (L/R) : +4 dBV, 600 Ω, 6.35 mm phone jack (unbalanced)

FB out : +4 dBV, 600 Ω, 6.35 mm phone jack (unbalanced)

EFF out : +4 dBV, 600 Ω, 6.35 mm phone jack (unbalanced)

Rec out (L/R) : -20 dBV, 10 kΩ, RCA pin jacks (unbalanced)

90 dB (MIC 1-6 inputs, Speaker out output)

20 - 20,000 Hz (+1, -3 dB) (AUX In)

< -120 dB

90 dB

10 kHz ±10 dB treble, 100 Hz ±10 dB bass

7 segment LED meter (-20, -10, -6, -3, 0, +3, +6 dB)

Steel plate, grey painted

450 x 169 x 418 mm

13 kg

WTU-4800 (UHF-tuner module); WTU-3800 (VHF-tuner module); YW-3510 (UHF & VHF-antenna)

Connection Example

WM-5220

F-1300B/W

F-1300B/W

HS-120B

WM-5220

DM-1100

DA-250

HS-120B

HS-150B

ST-312B

Cassette/

CD

MX-628

2x WTU-4800

DA-550

HS-150B

16


Car System

CA-115 (max. 35 W) / CA-130 (max. 60 W) / CA-160 (max. 120 W)

• Easy installation for 12 V battery equipped vehicle

• Compact and rugged

• Two microphone inputs and convenient auxiliary

for tape recorder, radio, etc. connection

• Unidirectional dynamic microphone with talk switch

• Matching in DIN size car radio slot





CA-115



CA-130



CA-160


Model CA-115 CA-130 CA-160

Power Supply 14 V DC 14 V DC 14 V DC

Current Consumption 2.2 A 4.4 A 9 A

Rated Power 15 W 30 W 60 W

Impedance 4 Ω / 8 Ω 4 Ω / 8 Ω 4 Ω / 8 Ω

Distorsion < 5% < 5% < 5%

Frequency Response 100 - 10,000 Hz ±3 dB 100 - 10,000 Hz ±3 dB 100 - 10,000 Hz ±3 dB

Inputs MIC 1,2: -48 dBV, 600 Ω; MIC 1,2: -48 dBV, 600 Ω; MIC 1,2: -48 dBV, 600 Ω;

AUX: -6 dBV, 10 kΩ AUX: -6 dBV, 10 kΩ AUX: -6 dBV, 10 kΩ

Finish

Front: ABS-resin, black; case: Zinc plated steel

Microphone

With talk switch, Impedance 600 Ω, Sensitivity -53 dB ±3 dB, cardioid

Dimensions (W x H x D) 178 x 50 x 132 mm 178 x 50 x 144 mm 178 x 50 x 170 mm

Weight 0.9 kg 1.1 kg 1.2 kg

Mobile Amplifiers with Cassette Deck


CA-107 (max. 15 W) / CA-207 (max. 30 W) / CA-407 (max. 60 W)





• Matching in DIN size car radio slot

• Built-in auto reverse cassette deck with pause

function

• Equipped with muting system

• Unidirectional dynamic microphone with talk

switch

Model CA-107 CA-207 CA-407

Power Supply 14 V DC 14V DC 14V DC

Current Consumption 1.8 A 3.2 A 5.5 A

Rated Power 10 W 20 W 40 W

Impedance 8 Ω 4 Ω / 8 Ω 4 Ω / 8 Ω

Distorsion < 5% < 5% < 5%

Frequency Response 100 - 10,000 Hz ±3 dB 100 - 10,000 Hz ±3 dB 100 - 10,000 Hz ±3 dB

Inputs MIC 1,2: -48 dBV, 600 Ω; MIC 1,2: -48 dBV, 600 Ω; MIC 1,2: -48 dBV, 600 Ω

Finish

Front: ABS-resin, black; case: Zinc plated steel

Mikrofon

With talk switch, Impedance 600 Ω, Sensitivity –73 dB ±3 dB, cardioid

Dimensions (W x H x D) 178 x 50 x 181.5 mm 178 x 50 x 181.5 mm 178 x 50 x 181.5 mm

Weight 1.3 kg 1.5 kg 1.7 kg

17


Ceiling Speakers

Flush Mount Speakers

PC-1869 (6 W) PC-2369 (6 W)

• Thin panel

• Fast & easy installation with spring clamp

• Push-in connectors for speaker cables

• In-/Out bridge connection

• Baffle: Steel plate, off-white paint /

Grille: Surface-treated steel plate net, off-white paint

Metal grille with

punched net

Metal grille and baffle

67.1

4.2

ø180

PC-2869 (6 W)

PC-2852 (6 W)

PC-1869

83.6

72.8

ø280

7.1

ø230

5.5

Metal grille and baffle

Metal grille and baffle

PC-2869 / PC-2852

PC-2369

Model PC-1869 PC-2369 PC-2869 PC-2852

Dyn. Cone Driver 12 cm 16 cm 20 cm 20 cm

Rated Input 6 W 6 W 6 W 15 W

Tappings 100 V 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W 15 W / 10 W / 5 W / 3 W

Frequency Response 55 Hz -18,000 Hz 45 Hz - 20,000 Hz 40 Hz - 20,000 Hz 45 Hz - 20,000 Hz

SPL (1 W, 1 m) 90 dB 93 dB 94 dB 96 dB

Baffle ø 180 mm ø 230 mm ø 280 mm ø 280 mm

Depth 67.1 mm 72.8 mm 83.6 mm 83.6 mm

Ceiling hole ø 150 mm 200 mm 250 mm 250 mm

Weight 620 g 760 g 1400 g 1600 g

PC-648R (6 W) PC-658R (6 W)

Metal grille and PP baffle

Metal grille and PP baffle

• Fast & easy installation with spring clamp

• Baffle: PP resin, off-white / SECC punching net, off-white

PC-648R

PC-658R

Model PC-648R PC-658R

Dyn. Cone Driver 12 cm 16 cm

Rated Input 6 W (100 V) / 3 W (70 V) 6 W

Tappings 100 V 6 W / 3 W / 1 W 6 W / 3 W / 1 W

Tappings 70 V 3 W / 1.5 W / 0.5 W 3 W / 1.5 W / 0.5 W

Frequency Response 100 Hz -18,000 Hz 65 Hz - 18,000 Hz

SPL (1 W, 1 m) 90 dB 90 dB

Baffle ø 168 mm ø 192 mm

Depth 77 mm 73 mm

Ceiling hole ø 145±5 mm 170±5 mm

Weight 470 g 500 g

18


5

5


PC-645R (6 W) PC-646R (6 W)





• 12 cm speaker

• Screw-in installation

• ABS resin grille

• 12 cm speaker

• Screw-in installation

• ABS resin baffle with aluminium net

grille, off-white



PC-643S (6 W) PC-644S (6 W)



• 12 cm speaker

• Screw-in installation

• ABS resin grille, off-white

• 12 cm speaker

• Screw-in installation

• ABS resin baffle with aluminium net

grille, off-white



Model PC-645R PC-646R PC-643S PC-644S

Dyn. Cone Driver 12 cm 12 cm 12 cm 12 cm

Rated Input 6 W 6 W 6 W 6 W

Tappings 100 V 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W

Frequency Response 100 Hz -12,000 Hz 100 Hz -12,000 Hz 100Hz -12,000 Hz 100 Hz -12,000 Hz

SPL (1 W, 1 m) 90 dB 90 dB 90 dB 90 dB

Baffle ø 191 mm ø 191 mm 200 x 200 mm 200 x 200 mm

Depth 74 mm 74 mm 74 mm 74 mm

Ceiling hole ø 150 mm 150 mm 143 mm 143 mm

Weight 550 g 560 g 640 g 660 g



Fire Dome Speakers

PC-1867F

ø156 ±3

Surface Mount Speaker



PC-1867F / PC-1867FC (6 W)

116

110

PC-2668 (6 W)

Decke

PC-1867F

ø156 ±3

ø180

116

Decke

110


ø180





• Metallic firedome construction prevents flame and

smoke from spreading into ceiling installation

• 12 cm speaker

• Easy installation with spring catches

• Push-in terminals for speaker cable (PC-1867F) or

Ceramic-terminals (PC-1867FC)

• Aluminium baffle

• PC-1867FC in accordance with British Standard BS5839

(Part 8)

• 12 cm Speaker

• Easy installation with spring catches

• Push-in terminals for speaker cable

• Exposed installation to the ceiling

• In- / Out bridge connection

• ABS resin baffle

• Mounting bracket for back box included

Model

PC-1867F / 1867FC

Model

PC-2668

Dyn. Cone Driver

Rated Input

Tappings 100 V

Frequency Response

SPL (1 W, 1 m)

Baffle

Ceiling Hole

Weight

12 cm

6 W

6 W / 3 W / 1.5 W / 0.8 W

100 Hz -16,000 Hz

90 dB

ø 180 mm

ø 156 mm

1.3 kg

Dyn. Cone Driver

Rated Input

Tappings 100 V

Frequency Response

SPL (1 W, 1 m)

Baffle

Dimensions

Weight

12 cm

6 W

6 W / 3 W / 1.5 W / 0.8 W

100 Hz -16,000 Hz

90 dB

260 mm

ø 260 x 92.5 mm

820 g

19


Box Speakers

Speaker for General Use

BS-1030B / 1030W (30 W) IPx4




• Aesthetically pleasing design blends in

modern buildings and other facilities, such as

boutique, restaurant and amusement park

• Cost-effective high power PA box speaker

• 2-Way bass reflex speaker

• Low impedance (8Ω) or high impedance (100V)

selectable by rotary switch

• Splash proof according to IPx4

• Expanded installation options. Can be mounted

horizontally or vertically: flush-mount wall/

ceiling, with or without mounting bracket on

the wall

• Equipped with U-angle mounting bracket

Optional wall and ceiling mount brackets

Model BS-1030B BS-1030W

Enclosure Bassreflex Bassreflex

Rated Input 30 W 30 W

Impedance 8 Ω 8 Ω

Tappings 100 V 30 W / 20 W / 15 W / 10 W / 5 W 30 W / 20 W / 15 W / 10 W / 5 W

SPL 90 dB (1 W / 1 m) 90 dB (1 W / 1 m)

Frequency Response 80 Hz - 20,000 Hz 80 Hz - 20,000 Hz

Speaker Systems

12 cm dynamic cone speaker, 2.5 cm balanced dome tweeter

Operating Temperature -10°C to +50°C -10°C to +50°C

Grade of Protection IPx4 IPx4

Finish Black White

Dimensions (W x H x D) 196 x 290 x 150 mm 196 x 290 x 150 mm

Weight 2.5 kg 2.5 kg

BS-1110 (10 W) / BS-1120 (20 W)

Model BS-1110 BS-1120

Rated Input 10 W 20 W

Impedanz 4 Ω 8 Ω

Tappings 100V 10 W / 5 W 20 W / 10 W

SPL 92 dB (1 W / 1 m) 95 dB (1 W / 1 m)

Frequency Response 150 Hz - 14,000 Hz 150 Hz - 20,000 Hz

Speaker 2 x 12 cm 4 x 12 cm + 2.5 cm Tweeter

Operating Temperature -10°C to +50°C -10°C to +50°C

Finish White White

Dimensions (W x H x D) 180 x 360 x 100 mm 180 x 720 x 100 mm

Weight 2.9 kg 5.1 kg

Optional Mounting Bracket YS-301, SP-410, WCB-12W YS-301

TMB-1W, Stand: ST-16A

• For religious facilities, lecture rooms and school auditoriums

• BS-1110W with 2 x 12 cm Cone Speaker and BS-1120W with

4x 12 cm Cone speaker and dome tweeter

• Wide horizontal and narrow vertical dispersion angle

• Low impedance (4 Ω / 8 Ω) or high impedance (100 V)

• Vertical array possible

• Mounting horizontally or vertically. Optional wall

mount brackets

Optional Accessories

SP-410

SP-420

ST-16A

Adjustable wall /

ceiling mount bracket

for BS-1030

Colour: Silver

20

Flush Mount Bracket

for BS-1030

Stand


BS-634/1034

110

330

Wall-Mounting Box Speakers

22.3

210

BS-634 / BS-634S (6 W) BS-634/1034 / BS-1034 / BS-1034S (10 W)

330

80

e

70

120

66.7

83.5

210

210

330

80

speaker receptacle

speaker receptacle

80

70

70

22.3

120

120

66.7 22.3

66.7 22.3

83.5

83.5

• Flat rectangular box speaker for vertical or horizontal

wall mounting

• 6 W (BS-634) or 10 W (BS-1034) rated input

• BS-634T / BS-1034S have an attenuator

• High sound quality and clarity

• Bridge wiring available

• Colour: off-white Case: HIPS resin,

punching net: SECC steel.

BS-634/1034

speaker receptacle

120

66.7

83.5

87.2

70

190

BS-633A 24 / BS-633AT (6 W)

60.2

BS-633A

BS-633AT

BS-680

330

173

BS-680

184

195

BS-680

3101

87.2

310 87.2

310 87.2

190

190

190

• Wall Mounting Box Speaker with 12 cm cone

speaker for BGM / Paging

• BS-633AT comes with attenuator

24

60.2

• ABS resin enclosure 210

BS-633A

BS-633AT 80

81

24

60.2

24

60.2

BS-633A

173

BS-633AT

BS-633A

101

173

BS-633AT

101

173

101

22.3

10

28.3

Model BS-634 BS-634T BS-1034 BS-1034S speaker BS-633A receptacle

BS-633AT

Speaker Component 12 cm cone type 12 cm cone type 12 cm dome type 12 cm dome type 12 cm cone type 12 cm cone type

81

Rated Input 6 W 6 W 10 W 10 W 6 W 6 W

81

Tappings 100 V 6 W / 3 W 6 W 10 W / 5 W / 10 W / 5 W / 6 W / 3 W / 1 W 6 W / 3 W

70

3 W / 1 W 3 W / 1 W

81

Tappings 70 V 3 W / 1.5 W 3 W 10 W / 5 W / 2.5 W / 10 W / 5 W / 2.5 W / 3 W / 1.5 W / 0.5 W 3 W / 1.5 W

BS-678

1.5 W / 0.5 W 1.5 W / 0.5 W

Frequency Response 120 Hz ... 18 kHz 120 Hz ... 18 kHz 120 Hz ... 20 kHz 120 Hz ... 20 kHz 120 Hz ... 15 kHz 120 Hz ... 15 kHz

SPL (1 W, 1 m) 90 dB 90 dB 90 dB 90 dB 91 dB 91 dB

Connectors Push-in terminal BS-678 Push-in terminal Push-in terminal Push-in terminal Push-in connector Push-in connector

Dimensions (W x H x D) 210 x 330 x 80 mm 210 x 330 x 80 mm 210 x 330 x 80 mm 210 x 330 x 80 mm 173 x 195 x 101 mm 173 x 195 x 101 mm

BS-678

Weight 1.3 kg 1.3 kg 1.4 kg 1.4 kg 780 g 810 g

R6 (R0.24")

184

195

184

184

195

195

120

66.7

83.5

R0.24")

83.5

250

110

28.3

BS-678 (6 W)

R6 (R0.24")

R6 (R0.24")

190

R6 (R0.24")

83.5

BS-680

BS-680F / BS-680FC (6 W)

250

250

110

110

28.3

28.3

310 87.2

190 190

R6 (R0.24")

R6 (R0.24")

83.5

83.5

190

24

60.2

Wooden cabinet speaker with PVC sheet and

HIPS baffle. Easy impedance selection. Bridge wiring

possible. Push-in connector. Colour off-white (RAL 9010

or equivalent).

Metal cabinet speaker for surface or flush-mounting. High sound

quality through 16 cm double cone speaker High sound pressure

level. Bridge wiring possible. Colour: off-white (RAL 9010

or equivalent). BS-680FC comes with 2 ceramic screw terminal

blocks and thermal fuse (compliance with BS 5839 part 8).

Model

BS-678

Speaker Component 16 cm double cone type

Rated Input 6 W (100 V) / 3 W (70 V)

Tappings 100 V

6 W / 3 W / 1.5 W / 0.8 W

Tappings 70 V

3 W / 1.5 W / 0.8 W / 0.4 W

Frequency Response 150 Hz - 20,000 Hz

SPL (1 W, 1 m)

94 dB

Connector

Push-in connector (bridging terminal)

Dimensions (W x H x D) 250 x 190 x 110 mm

Weight

1.7 kg

Model BS-680F BS-680FC

Speaker Element 16 cm double cone type 16 cm double cone type

Rated Input 6 W (100 V) / 3 W (70 V) 6 W (100 V) / 3 W (70 V)

Tappings 100 V 6 W / 3 W / 1.5 W / 0.8 W 6 W / 3 W / 1.5 W / 0.8 W

Tappings 70 V 3 W / 1.5 W / 0.8 W / 0.4 W 3 W / 1.5 W / 0.8 W / 0.4 W

Frequency Response 150 Hz - 20,000 Hz 150 Hz - 20,000 Hz

SPL (1 W, 1 m) 94 dB 94 dB

Connector Push-in connector Screw terminal (ceramic)

Dimensions (W x H x D) 310 x 190 x 87.2 mm 310 x 190 x 87.2 mm

Weight 3 kg 3 kg

Other Features – BS 5839-8 equivalent

BS-678

R6 (R0.24")

21


Wide Range and Column Speakers

Pendant Speakers

PE-64 (6 W) / PE-304 (30 W)

• Special design to blend with lighting equipment

• 30 W (PE-304) or 6 W (PE-64) rated input

• Rugged HIPS resin enclosure

• Excellent sound quality

• Inputs for 100 V and 70 V systems, PE-304 additionally with 8 Ω input

• Easy impedance selection

• Colour: off-white (RAL 9010 or equivalent)

• Paintable

• Equipped with 5 m cord

Model PE-64 PE-304

Dynamic Cone Driver 12 cm 12 cm

Rated Input 6 W (100 V) / 3 W (70 V) 30 W (100 V) / 3 W (70 V)

Impedance 100 V / 70 V 100 V / 70 V / 8 Ω

Tappings 100 V 6 W / 3 W / 1 W 30 W / 20 W / 15 W / 10 W / 5 W

Tappings 70 V 3 W / 1.5 W / 0.5 W 30 W / 20 W / 15 W / 10 W / 5 W

Frequency Response 100 Hz - 18,000 Hz 70 Hz - 20,000 Hz

SPL (1 W, 1 m) 90 dB 91 dB

Connection

Push-in connector (bridging terminal, 2-branch) Push-in connector (bridging terminal, 2-branch)

Dimensions ø 186 x 251 mm ø 186 x 251 mm

Weight 1.5 kg 2.1 kg

• Setup Guide for Speakers

Building Type Office Hospital School Supermarket Shopping Mall Gymnasium Church/Mosque

Ceiling type flat flat flat flat flat non-flat non-flat

Recommended Speaker BS-633 PC-2369/1869 PC-644S PC-644S PJ-64 HX-5 series F-1000 series

BS-634/1034 PC-2869 PC-2852 PC-1869 PJ-304 TZ-105/205 F-1300 series

BS-680 PC-643S/644S PC-2668 PC-2668 PJ-100 TZ-301 F-2000 series

PC-645R/646R PC-1867F PJ-200 F-1300 series BS-1110 / 1120

F-2000 series HX-5 series

• Calculation for Amplifier and Speaker Power

Amplifier Amplifier Speaker Total Quantity of Speaker

Model Output Total Input 1 W 3 W 6 W

A-2030 / A-1803 30 W 30 W 30 10 5

A-2060 / A-1706 / A-1806 60 W 60 W 60 20 10

A-2120 / A-1712 / A-1812 120 W 120 W 120 40 20

A-2240 / A-1724 240 W 240 W 240 80 40

• Typical Ceiling Speaker Arrangement

12 m

Situation

Purpose

Solution

: Office 18m x 12 m with 3m Ceiling height

: Paging, BGM

: Speaker with 6m balance

18 m

Please refer to page 49 –

Technical Column

22


Projection Speakers for Indoor Use

PJ-64 (6 W) / PJ-304 (30 W)

• Speaker for announcements and music in buildings with high noise level

• Wide range frequency response

• Housing: HIPS resin; grille: steel net

• Easy to mount

• Colour off-white (RAL 9010 or equivalent)

• For 100 V, 70 V systems, PJ-304 additionally for 8 Ω systems

• Complete with mounting bracket for easy installation

Model PJ-64 PJ-304

Dyn. Cone Driver 12 cm 12 cm

Rated Input 6 W (100 V ) / 3 W (70 V) 30 W

Tappings 100 V 6 W / 3 W / 1 W 30 W / 20 W / 15 W / 10 W / 5 W

Tappings 70 V 3 W / 1.5 W / 0.5 W 30 W / 20 W / 15 W / 10 W / 5 W

Frequency Response 100 Hz - 18,000 Hz 70 Hz - 20,000 Hz

SPL (1 W, 1 m) 90 dB 91 dB

Dimensions ø 186 x 369 mm ø 186 x 369 mm

Weight 1.5 kg 2.1 kg

PJ-100W (10 W) PJ-200W (20 W)

Wide range Speaker for announcements and music, easy to mount










SPL up to 102 dB (1 m) SPL up to 108 dB (1 m)




Model PJ-100W PJ-200W

Dyn. Cone Driver 12 cm 16 cm

Rated Input 10 W 20 W

Tappings 100 V 10 W / 5 W / 2.5 W 20 W / 10 W / 5 W / 2.5 W

Frequency Response 65 Hz - 15,000 Hz 50 Hz - 20,000 Hz

SPL (1 W, 1 m) 92 dB 95 dB

Dimensions (W x H x D) ø 140 x 195 mm (without bracket) ø 180 x 250 mm (without bracket)

Weight 1.8 kg 2.5 kg



23






Projection Speakers for Outdoor Use

Weatherproof polyurethane resin paint and impact-proof leightweight ABS resin enclosure, and the stainless steel

brackets enable many years of outdoor use. Constant directivity coverage (90 degree in horizontal) for CS-154 and

CS- 304.

CS-64 (6 W)



SPL up to 104 dB (1 m)





CS-154 (15 W) / CS-304 (30 W)




IP-65, 90° horizontal constant directivity

coverage. SPL up to 109 dB (1 m, CS-

154) resp. up to 113 dB (1 m, CS-304)

Model CS-64 CS-154 CS-304

Dyn. Cone Driver 12 cm 12 cm 12 cm

Rated Input 6 W 15 W 30 W

Tappings 100V / 70 V 6 W / 3 W / 1 W 15 W / 10 W / 5 W 30 W / 20 W / 10 W

Frequency Response 130 Hz - 13,000 Hz 150 Hz - 15,000 Hz 120 Hz - 15,000 Hz

SPL (1 W, 1 m) 96 dB 97 dB 98 dB

Dimensions (W x H x D) 233 x 224 x 208 mm 366 x 230 x 272 mm 366 x 230 x 272 mm

Weight 1.5 kg 2.8 kg 3.1 kg

24


Column Speakers IPx3

Metal Case Type

Splashproof for outdoor use under roof eaves

Enclosure silver and black front grille

TZ-105 (10 W) TZ-205 (20 W) TZ-301 (30 W)





Column Speaker Directivity

Model TZ-105 TZ-205 TZ-301

Dyn. Cone Driver 2x 12 cm 4x 12 cm 6x : 12.7x17.8 cm

Rated Input 10 W 20 W 30 W

Tappings 100 V 10 W / 5 W 20 W / 10 W 30 W / 15 W

Frequency Response 150 Hz - 10 kHz 150 Hz - 10 kHz 160 Hz - 10 kHz

SPL (1 W, 1 m) 90 dB 93 dB 100 dB

Dimensions (W x H x D) 167 x 335 x 141 mm 167 x 580 x 141 mm 167 x 1256 x 141 mm

Weight * 4.4 kg 5.7 kg 12.8 kg

* incl. bracket

25


Horn Speakers IP 65

Horn Speakers for General Use

High input power handling for multiple application. Excellent for outdoor use. Durable construction. Long term

reliable operation. Screws and bolts of stainless steel.

TC-615 / 615M (15 W)



Horn Speaker with 250 - 7,000 Hz Frequency Response and

120 dB (1 m) Sound Pressure Level for Paging and BGM

TC-631 / 631M (30 W)



Horn Speaker with 200 - 6,000 Hz Frequency Response and

125 dB (1 m) Sound Pressure Level for Paging and BGM

Modell TC-615 TC-615M TC-631 TC-631M

Rated Power 15 W 15 W 30 W 30 W

Tappings 100 V – 15 W / 10 W / – 30 W / 15 W /

5 W / 3 W 10 W / 5 W

Tappings 70 V – 15 W / 7.5 W / – 30 W / 15 W /

5 W / 2.5 W / 1.5 W 7.5 W / 5 W / 2.5 W

Rated Impedance 8 Ω – 16 Ω –

Frequency Response 250 Hz - 7,000 Hz 250 Hz - 7,000 Hz 200 Hz - 6,000 Hz 200 Hz - 6,000 Hz

SPL (1 W, 1 m) 108 dB 108 dB 110 dB 110 dB

Dimensions ø 400 x 376 mm ø 400 x 376 mm ø 500 x 463 mm ø 500 x 463 mm

Weight 3 kg 3.2 kg 4.1 kg 4.5 kg

IP Grade IP 65 IP 65 IP 65 IP 65

• Distribution Pattern of Horn Speakers

The above pattern is shown under ideal environment.

Air temperature and wind effect the pattern greatly

26


Horn Speakers for Paging

Designed compact for easy handling. Stainless steel anti corrosion bracket is equipped. Color: Off-white.

SC-610 / 610M (10 W)



SC-615 / 615M (15 W)





max.120 dB SPL (1 m)

max.124 dB SPL (1 m)

SC-630 / 630M (30 W)

SC-651 (50 W)







max.128 dB SPL (1 m)

max.126 dB SPL (1 m)

Can be mounted on cars and trucks for

mobile use

Model SC-610 SC-610M SC-615 SC-615M

Rated Input 10 W 10 W 15 W 15 W

Tappings 100 V – 10 W / 5 W / 3 W / 1 W – 15 W / 10 W / 5 W / 3 W

Tappings 70 V – 10 W / 5 W / 2.5 W / – 15 W / 7.5 W / 5 W /

1.5 W / 0.5 W 2.5 W 1.5 W

Low Impedance 8 Ω – 8 Ω –

Frequency Range 315 – 12,500 Hz 315 – 12,500 Hz 280 - 12,500 Hz 280 - 12,500 Hz

SPL (1 W, 1 m) 110 dB 110 dB 112 dB 112 dB

Dimensions (W x H x D) 172 x 161 x 188 mm 172 x 161 x 188 mm 222 x 179 x 234 mm 222 x 179 x 234 mm

Weight 1 kg 1.2 kg 1.3 kg 1.3 kg

IP Grade IP 65 IP 65 IP 65 IP 65

Model SC-630 SC-630M SC-651

Rated Input 30 W (mobile use: 15 W) 30 W 50 W (mobile use: 30 W)

Tappings 100 V – 30 W / 15 W / 10 W / 5 W –

Tappings 70 V – 30 W / 15 W / 7.5 W / 5 W / –

2.5 W

Low Impedance 8 Ω – 16 Ω

Frequency Response 250 – 10,000 Hz 250 – 10,000 Hz 250 – 6,000 Hz

SPL (1 W, 1 m) 113 dB 113 dB 109 dB

Dimensions (W x H x D) 285 x 227 x 277 mm 285 x 227 x 277 mm 430 x 297,5 x 327 mm

Weight 1.7 kg 2 kg 3.4 kg

IP Grade IP 65 IP 65 IP 65

Typical Connection of Low Impedance and High Impedance Speakers

A-2060 (60 W)

A-1806 (60 W)

TC-631

8 Ω

or

SC-630

8 Ω

A-2060 (60 W)

A-1806 (60 W)

670 Ω

TC-615M

!

TC-615M

TC-615M

4 Ω

Output

TC-631 SC-630

A-1706 (60 W) Impedance

A-1706 (60 W)

or

8 Ω

8 Ω

100 V

High

Output

Impedance

or

SC-615M

or

SC-615M

or

SC-615M

27


Driver Units

TU-631 (30 W) / TU-651 (50 W) / TU-631M (30 W) / TU-651M (50 W)





TU-631/651

TU-631M / TU-651M

























• Higly efficient horn drivers for reflex horns

• Weatherproof (IP 65) in combination with following reflex horns: TH-650 or TH-660

• 2 input power versions: 30 or 50 W

• For high impedance (TU-631M / TU-651M) or low impedance applications (TU-631 / TU-651)

Model TU-631 TU-651 TU-631M TU-651M

Rated Input 30 W 50 W 30 W 50 W

Rated impedance 16 Ω 16 Ω - -

Tappings 100 V - - 30 W / 15 W /10 W / 5 W 50 W /30 W /15 W

Tappings 70 V 30 W / 15 W / 7.5 W / 5 W / 2.5 W 50 W / 25 W / 15 W / 7.5 W

Frequency Response 150 Hz - 6,000 Hz 150 Hz - 6,000 Hz 150 Hz - 6,000 Hz 150 Hz - 6,000 Hz

SPL (1 W, 1 m) 110 dB 110 dB 110 dB 110 dB

Horn Coupling (INCH) 1-3/8" 1-3/8" 1-3/8" 1-3/8"

Dimensions ø 139 x 106 mm ø 139 x 106 mm ø 139 x 149 mm ø 139 x 149 mm

Weight 1.4 kg 1.9 kg 2 kg 2.7 kg

IP Grade IP 65 IP 65 IP 65 IP 65

Reflex Horns

TH-650 / TH-660

TU-Series driver required (optional)

• Rugged construction

• Symmetrical sound dispersion

• Durable powder coating on the surface of horns

ensures superb weatherproofing


Model TH-650 TH-660

Cut-off Frequency 200 Hz 200 Hz

Sound Dispersion Angle 50° (2 kHz) 70° (2 kHz)

Dimensions (mm) ø 500 x 394 ø 600 x 425

without Driver


Horn Coupling (INCH) 1-3/8" 1-3/8"

Weight 2.9 kg 3.6 kg


Number of Drivers to be 1 1

mounted

Applicable Drivers TU-631/-631M/-651/-651M TU-631-631M/-651/-651M

IP Grade

IP 65 IP 65
















28


OFF

OFF

model AT-603P

INPUT CAPACITY 60W

TOA Corporation

MADE IN JAPAN

Accessories

Flush Mount Volume Control

AT-12UP / AT-50UP / AT-12UPR / AT-50UPR

(flush-mount use, DIN 49037)

Attenuators

AT-063P (6 W) / AT-303P (30 W) / AT-603P (60 W)

• 12-steps

• Matching with GIRA switcher accessories

• UPR-version with priority relay

• AT-12UP / AT-12UPR 12 W, depth: 26 mm

AT-50UP / AT-50UPR 50 W, depth: 40 mm

• With covered label

• Colour: Off-white

120

AT-063P / AT-303P

70

• Five attenuation settings

(Off / 0 / -6 / -12 / -18 dB), over an

input range from 0.5 W to 6 W

(AT-063P), 30 W (AT-303P) or

60 W (AT-603P)

• Push-in connector (bridging terminal)

• Matching wall mount boxes:

YC-301 (Flush-mount Back Box) and

YS-11A (Surface-Mount Back Box)

32.8 3.85

120

AT-603P

70 35.9

Plate

Plate

32.8 3.85

Program Selector

PGW-6 / PGW-6R

Flush Mount Amplifier

UP-MV-206

2-M4

120

102

• Program selector

• Flush mount use, DIN 49037

• One of 6 programs selectable

• PGW-6R with priority relay

• Mounting depth: 30 mm

• Options: Gira switcher accessories

543

5-21.5

70

• Flush

Knock-out

mount

hole

amplifier (DIN 49037)

• Pre-amplifier with microphone (XLR) and AUX (RCA pin) input

• Phantom voltage for microphone on PCB selectable

• Volume control for microphone and AUX separately

• For flush mounting 3 flush mount boxes according to

DIN 49037 are required

• Finish: off-white

35

Impedance Meter

ZM-104A

Fast detection of short circuits etc.

• For easy and exact measurement of speaker line impedances

• Battery driven for mobile use (4 Mignon (AA) batteries)

• 30 - 60 hours continuous use with one set of batteries

• Built-in 1 kHz oscillator

• Range 5 Ω - 100 kΩ

• Graphic conversion table impedance - power

• Incl. a case and one set of test leads

29


Foreground Music Speakers

Harmonized Engineering Speakers

The H-Series speakers combine pleasant design with excellent acoustical characteristics

H-1 (30 W)

H-2 / H-2WP (40 W)














• Attractive 2-way design speaker

• Narrow coverage area allows a controlled sound

• Speaker axis can be mounted to match with the room axis

• Sound direction can be adjusted within 90°


• Colour: White

• Built-in transformer allows both high and low impedance:


4 Ω, 16 Ω or 70 V, 100 V

• Easy installation in standard electrical gang boxes

• Fire-rated ABS enclosure (UL Standard 94: V-0 grade)






• 2-way design speaker

• Fire-rated ABS enclosure (UL Standard 94: V-0 grade)

• H-2WP: Weatherproof IP 64 certified, matches the requirements


for outdoor applications








• Narrow coverage area allows controlled sound

• Speaker axis can be mounted to match with the room axis

• Sound direction can be adjusted within 360°

• Easy installation in standard electrical gang boxes

H-3 / H-3WP (50 W)






























• 2-way speaker with stylish design

• High quality sound between and in front of each speaker unit




• Ideal for long but narrow areas such as corridors or tea gardens


• H-3WP: Weatherproof version for outdoor applications


• Easy, unobtrusive installation at above head-height

• Installation directly to wall




• 180° coverage pattern, eliminating acoustically dead areas


• Low impedance (8 Ω / 16 Ω) or high impedance (70 V/ 100 V)

• Fire resistant ABS according to UL 94: V-0










HB-1 (50 W)






• Unobtrusive design



• Compact dimensions

• Very low installation depth for flush-mount use

• Acoustic super woofer enclosure



• Frequency response exactly matches with H-1, H-2 and H-3

• Large volume for an excellent low frequency audio response

• Easy flush-mount installation into walls or into ceilings

Enclosure Sealed type Sealed type Sealed type Sealed type Sealed type Acoustic Super Woofer

Rated Input 30 W 40 W 40 W 50 W 50 W 80 W

Continuous Program 90 W 120 W 120 W 150 W 150 W 240 W

Impedance 4 Ω / 16 Ω 4 Ω / 16 Ω 4 Ω / 16 Ω 8 Ω / 16 Ω 8 Ω / 16 Ω 8 Ω

100 V: 12 W / 6 W / 3 W 100 V: 30 W / 15 W / 7.5 W

70 V: 12 W/ 6 W / 3 W / 1.5 W

70 V: 30 W / 15 W / 7.5 W / 3.75 W



Frequency Response 120 - 20 000 Hz 100 - 20 000 Hz 100 - 20 000 Hz 100 - 20 000 Hz 100 - 20 000 Hz 45 - 200 Hz

SPL (1 W, 1 m) 85 dB 88 dB 88 dB 89 dB 89 dB 91 dB

Dimensions (WxHxD) 312 x 126 x 90 mm ø 268 x 111 mm ø 268 x 111 mm 295 x 318 x 129 mm 295 x 318 x 129 mm 430 x 544 x 135 mm

Weight 1.5 kg 2.1 kg 2.1 kg 3.3 kg 3.3 kg 11 kg

Colour White White White White White White

Special Features IPx4 IPx4 20 cm Woofer






















Model H-1 H-2 H-2WP H-3 H-3WP HB-1

30


Wide Dispersion Flush Mount Speakers

Expanded listening coverage area through extra-wide dispersion characteristics. Easy installation. Various models and

and accessories meet a wide variety of requirements. All materials are fire resistant in accordance with UL-94 V0.

The back-can additionally prevents fire and smoke into the ceiling

F-2852C (60 W)

F-122C (30 W)

F-2352C (30 W)

2-Way HiFi speaker for high power

applications e.g. for high ceilings

(3...6 m)

• 16 cm speaker

• Diffusor for wide dispersion of

high frequencies

• Metal back can

F-2322C (30 W)

Equalizing controlled type full range

speaker. Cost effective if many

speakers are installed. For medium

ceiling height (2...4 m).

• Heat-resistant back can

• Optimized for use with AC-120

Controller. Ideal for use with

additional subwoofers

• Diffusor for wide dispersion of high

frequencies

2-Way HiFi speaker for medium

ceiling height (2...4 m).

• 12 cm speaker

• Diffusor for wide dispersion of

high frequencies

• Metal back can

Full range speaker according to

UL- 94 V0

For medium ceiling height (2...4 m).

• 12 cm speaker

• Metal back can

• Flat grille

Model F-2852C F-2322C F-2352C F-122C

Rated Input 60 W (8 Ω) 60 W (8 Ω) 60 W (8 Ω) 60 W (8 Ω)

Continuous Program 180 W (8 Ω) 120 W (8 Ω) 120 W (8 Ω) 120 W (8 Ω)

Impedance 100 V / 70V / 25 V // 16 Ω / 8 Ω 100 V / 70 V / 25 V // 16 Ω / 8 Ω 100 V / 70 V / 25 V // 16 Ω / 8 Ω 100 V / 70 V / 25 V // 16 Ω / 8 Ω

Tappings 100 V 60 W / 30 W / 15 W / 3 W 30 W / 10 W / 3 W / 1 W 30 W / 10 W / 3 W / 1 W 30 W / 10 W / 3 W / 1 W

Frequency Response 60 Hz - 20,000 Hz 70 Hz - 20,000 Hz 70 Hz - 20,000 Hz 70 Hz - 20,000 Hz

SPL (1 W, 1 m) 91 dB 90 dB 90 dB 90 dB

Finish

Enclosure, punched net: Steel plate, Baffle rim: Fire-resistant ABS resin (UL-94 V0), white paint (rim and punched net)

Mounting Hole ø 250 mm ø 200 mm ø 200 mm ø 200 mm

Dimensions ø 280 x 227 (D) mm ø 230 x 200 (D) mm ø 230 x 229 (D) mm ø 230 x 229 (D) mm

Weight 5.1 kg* 3.7 kg* 3.7 kg* 3.7 kg*

* incl. mounting accessories

Sound Dispersion of Conventional Speakers

Wide Dispersion Speaker

31


Wide-Dispersion Flush Mount Speakers

F-1522SC (6 W)

F-2352SC (6 W)

Cost-effective compact model for low power

applications and medium ceiling height (2...4m)

• Only 117 mm mounting depth

• Flat front panel

• 10 cm full range speaker

2-way wide range speaker with diffusor for low power applications

and medium ceiling height (2...4m).

• 12 cm cone woofer and dome tweeter

• Easy installation

• Diffusor for wide dispersion of high frequencies

• For use in ceilings with minimal depth

Model F-1522SC F-2352SC

Rated Input 9 W (8 Ω) 9 W (8 Ω)

Continuous Program 18 W (8 Ω) 18 W (8 Ω)

Impedance 100 V / 70V / 25V // 16Ω / 8Ω 100 V / 70 V / 25 V // 16 Ω / 8 Ω

Tappings 100 V 6 W / 3 W 6 W / 3 W / 1 W / 0.5 W

Frequency Response 65 Hz - 18,000 Hz 80 Hz - 20,000 Hz

SPL (1 W, 1 m) 88 dB 89 dB

Finish

Punched net: Steel plate, baffle rim: Fire-resistant ABS resin (UL-94 V0),

White paint (rim and punched net), dust proof bag: artifical fiber, black

Mounting Hole ø 135 mm ø 200 mm

Dimensions ø 155 x 117 (D) mm ø 230 x 154 (D) mm

Weight 1 kg (incl. panel) 1.5 kg (incl. panel)

Optional Accessories

For F-Series:

Back Can Tile Bar Bridge Trim Ring Anchor Hanging Bracket

HY-BC1 HY-TB1 HY-TR1 HY- AH1

For surface mount or pending

installation of flush-mount

speakers

For louvered ceiling support

e.g. to reduce the load

For installation of flush-mount

ceiling speakers in larger

existing holes or for louvered

ceiling support

For direct mounting to the ceiling with

anchor bolt e.g. for a weak louvered

ceiling

Equalizing Speaker Controller (for F-122C)

AC-120

• For the use with the F-122C

• The electronic controller’s equalizing and filter circuitry

provide optimal balancing characteristics

• Two channels can be controlled plus one low output for

an additional subwoofer system (e.g. FB-100 or HB-1)

Model

AC-120

Inputs

(electronic bal.) 2x +4 dBm (max.±20 dBm)

Outputs

(electronic bal.) 2x +4 dBm (max.±20 dBm),

1x +4 dBm (max.+20 dBm) low out

Frequency Response 20 Hz - 20,000 Hz

Distortion < 0,05%

Hum & Noise < 94 dB

Dimensions (WxHxD) 482.6 x 44 x 297.5 mm

AC-Line Voltage 230 V, 50/ 60 Hz

Power Consumption 9 W

Weight

3.7 kg

32


High Quality Sound Speakers

Fashion Speakers for Foreground Music

F-1000B / F-1000W (30 W)

F-1000BT / F-1000WT (15 W)

F-1000BTWP / F-1000WTWP (15 W)

2-Way Bass Reflex Speaker







• Wide dispersion speaker system

• Compact 2-way speaker includes a high

quality 10 cm woofer and balanced dome

tweeter with a special octagonal horn for clear,

wide-area sound coverage

• 3 different versions available: Low impedance,

high impedance („T“) for 100 V line and

weatherproof version („WP”)

• Great variety of brackets available

• Colour: "B" models are black,

"W"models are white


• Paintable enclosure and front grille







F-1300B / F-1300W (50 W)

F-1300BT / F-1300WT (30 W)

F-1300BTWP / F-1300WTWP (30 W)

2-Way Bass Reflex Speaker








• Wide dispersion speaker system

• Compact 2-way speaker includes a high

quality 13 cm woofer and balanced dome

tweeter with a special octagonal horn for clear,

wide-area sound coverage

• 3 different versions available: Low impedance,

high impedance („T“) for 100 V line and

weatherproof version („WP”)

• Great variety of brackets available.

• Colour: "B" models are black,

"W"models are white


• Paintable enclosure and front grille








Model F-1000B / F-1000W F-1000BT / F-1000WT F-1000BTWP / F-1000WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflex

Power Handling Capacity 30 W (rated) / 90 W (continuous program) 15 W 15 W

Tappings 100 V - 15 W / 5 W / 3 W / 1 W 15 W / 5 W / 3 W / 1 W

Low Impedance 8 Ω - -

Frequency Response 85 Hz - 20,000 Hz 85 Hz - 20,000 Hz 85 Hz - 20,000 Hz

Crossover Frequency 5 kHz 5 kHz 5 kHz

SPL (1 W, 1 m) 87 dB 87 dB 87 dB

Water Protection - - IPx4

Dimensions (W x H x D) 130 x 202 x 131 mm 130 x 202 x 131 mm 130 x 202 x 131 mm

Weight 1.8 kg 1.8 kg 2 kg

Model F-1300B / F-1300W F-1300BT / F-1300WT F-1300BTWP / F-1300WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflex

Power Handling Capacity 50 W (rated) / 150 W (continuous program) 30 W 30 W

Tappings 100 V - 30 W / 10 W / 3 W / 1 W 30 W / 15 W / 3 W / 1 W

Low Impedance 8 Ω - -

Frequency Response 80 Hz - 20,000 Hz 80 Hz - 20,000 Hz 80 Hz - 20,000 Hz

Crossover Frequency 2 kHz 2 kHz 2 kHz

SPL (1 W, 1 m) 90 dB 90 dB 90 dB

Water Protection - - IPx4

Dimensions (W x H x D) 162 x 250 x 161 mm 162 x 250 x 161 mm 162 x 250 x 161 mm

Weight 3.1 kg 3.6 kg 3.6 kg

33


F-2000B / F-2000W (60 W)

F-2000BT / F-2000WT (60 W)

F-2000BTWP / F-2000WTWP (60 W)

2-Way Bass Reflex Speaker















• Wide dispersion speaker system

• Compact 2-way speaker includes a high


quality 20 cm woofer and balanced dome tweeter with a special octagonal

horn for clear, wide-area sound coverage

• Dispersion angle of 110° x 100°

• Easily mountable 80° x 80° horn adaptor for increased dispersion control

included

• 3 different versions available: Low impedance, high impedance („T“) for 100 V

line and weatherproof version („WP”)

• Great variety of brackets available

• Colour: "B" models are black, "W"models are white

• Paintable enclosure and front grille



Without adaptor

110° 100° octagonal horn

horizontal 110°

Various Mounting Options

Dispersion control

Without adaptor

110° 100° octagonal horn

horizontal 80°

With adaptor

80° 80° octagonal horn

horizontal 110°

horizontal 80°

With adaptor

80° 80° octagonal horn

Model F-2000B / F-2000W F-2000BT / F-2000WT F-2000BTWP / F-2000WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflex enclosure

Power Handling Capacity 60 W (rated) / 150 W (continuous program) 60 W 60 W

Tappings 100 V - 60 W / 30 W / 15 W / 3 W 60 W / 30 W / 15 W / 3 W

Low Impedance 8 Ω - -

Frequency Response 65 Hz - 20 kHz 65 Hz - 20 kHz 65 Hz - 20 kHz

Crossover Frequency 2.5 kHz 2.5 kHz 2.5 kHz

SPL (1 W, 1 m) 92 dB 92 dB 92 dB

Water Protection - - IPx4

Dimensions (W x H x D) 244 x 373 x 235 mm 244 x 373 x 235 mm 244 x 373 x 235 mm

Weight 6.5 kg 6.5 kg 7.4 kg

34


Optional Accessories

Mounting Brackets for F-1000 /

F-1300 Series

HY-BH10B

Board Hanger Bracket

• For F-1000 Series

• Colour black

• Weight 210 g

• Dimensions (W x H x D)

48 x 100 x 108 mm

HY-CL10B and HY-CL10W

Cluster Bracket

• HY-CL10B: black

HY-CL10W: white

HY-CM10B and HY-CM10W

Wall / Ceiling Bracket

• Weight 210 g

• Dimensions (W x H x D)

48 x 100 x 108 mm

• HY-CM10B: black

HY-CM10W: white

Mounting Brackets for F-2000

Series

HY-CL20B and HY-CL20W

Cluster Bracket

• HY-CL20B: black

HY-CL20W: white

HY-CM20B / HY-CM20W

Wall / Ceiling Bracket

• For F-2000 Series

• Weight 610 g

• Dimensions (W x H x D)

84 x 135 x 175 mm

• HY-CM20B: black

HY-CM20W: white

Stand

ST-16A

Speaker Stand

• Height

1130...1660 mm

• Max. Load 6 kg

• Colour: silver

Various Mounting Options

Various Installation Options

r

horn

Wall mounting Ceiling mounting Stand mounting

Ceiling mounting

Cluster mounting

rn

Pole mounting

Board hanger

Matching Subwoofers

FB-120B / FB-120W

Subwoofer (200 W)

• For F-1300 / F-2000

Series

• FB-120B: black

FB-120W: white

FB-100

Subwoofer (150 W)

• For F-1300/ F-2000

Series

• Colour: black

HB-1

Subwoofer (50 W)

• For F-1000 Series

• Colour: white

35


Coaxial Array Speakers

HS-120B / HS-120W / HS-150B / HS-150W (100 W)

HS-1200BT / HS-1200WT / HS-1500BT / HS-1500WT (60 W high impedance / 100 W low impedance)

• For mobile or fixed installation e.g. in clubs, banquet rooms or schools, etc.

• Easy to carry and easy to install, with handle for easy transportability

• Rubber feet for straight positioning

• Can be used as a floor monitor

• Twin input terminal connections (Speakon and screw terminals) for fixed and

mobile installation

• Well-controlled sound coverage: 90° horizontal x 40° vertical

• HS-120/1200 series with 12" LF speaker, HS-150/1500 series with

15" LF speaker

• 2-way unit system equipped with a large-diameter woofer and array tweeter

• Size and weight have been reduced thanks to the use of the array tweeter

• Compact and versatile design enables a broad range of applications

• Multi-purpose speaker designed for both permanent installations

and mobile PA

• A model with a built-in matching transformer, for use in high-impedance

applications

• Colour black or white

Dispersion Angle

Front View

Rear View

40°

Narrow

Dispersion

Angle

HS-Series Speaker

Conventional

Speaker

Narrow directivity control, e.g. for stage application

Model HS-120B HS-120W HS-1200BT HS-1200WT

Speaker Component (LF) 30 cm (12") cone-type 30 cm (12") cone-type 30 cm (12") cone-type 30 cm (12") cone-type

HF Balanced dome-type × 6 Balanced dome-type × 6 Balanced dome-type × 6 Balanced dome-type × 6

Power Handling Capacity 100 W (rated) 100 W (rated) 60 W (rated, high impedance) 60 W (rated, high imped.)

300 W (continuous program) 300 W (continuous program) 100 W / 300 W (low impedance) 100 W / 300 W (low impedance)

Rated Impedance (High) – – 70 V / 100 V 70 V / 100 V

(Low) 8 Ω 8 Ω 8 Ω 8 Ω

Sensitivity 97 dB (1 W, 1 m) 97 dB (1 W, 1 m) 97 dB (1 W, 1 m) 97 dB (1 W, 1 m)

Frequency Response 80 - 20,000 Hz 80 - 20,000 Hz 70 - 20,000 Hz 70 - 20,000 Hz

Directivity Angle Horizontal: 90° Horizontal: 90° Horizontal: 90° Horizontal: 90°

Vertical: 40° Vertical: 40° Vertical: 40° Vertical: 40°

Dimensions (W x H x D) 361 × 448 × 320 mm 361 × 448 × 320 mm 361 × 448 × 320 mm 361 × 448 × 320 mm

Weight 8.5 kg 8.5 kg 10 kg 10 kg

Finish (Color) Black White Black White

Polypropylene Polypropylene Polypropylene Polypropylene

Model HS-150B HS-150W HS-1500BT HS-1500WT

Speaker Component (LF) 38 cm (15") cone-type 38 cm (15") cone-type 38 cm (15") cone-type 38 cm (15") cone-type

HF Balanced dome-type × 6 Balanced dome-type × 6 Balanced dome-type × 6 Balanced dome-type × 6

Power Handling Capacity 100 W (rated) 100 W (rated) 60 W (rated, high imped.) 60 W (rated, high imped.)

300 W (continuous program) 300 W (continuous program) 100 W / 300 W (low impedance) 100 W / 300 W (low impedance)

Rated Impedance (High) – – 70 V / 100 V 70 V / 100 V

(Low) 8 Ω 8 Ω 8 Ω 8 Ω

Sensitivity 98 dB (1 W, 1 m) 98 dB (1 W, 1 m) 98 dB (1 W, 1 m) 98 dB (1 W, 1 m)

Frequency Response 70 - 20,000 Hz 70 - 20,000 Hz 60 - 20,000 Hz 60 - 20,000 Hz

Directivity Angle Horizontal: 90° Horizontal: 90° Horizontal: 90° Horizontal: 90°

Vertical: 40° Vertical: 40° Vertical: 40° Vertical: 40°

Dimensions (W x H x D) 451 × 560 × 400 mm 451 × 560 × 400 mm 451 × 560 × 400 mm 451 × 560 × 400 mm

Weight 12 kg 12 kg 14 kg 14 kg

Finish Black White Black White

Polypropylene Polypropylene Polypropylene Polypropylene

36


Various Installation Options

Mounting brackets for Wall / Ceiling

HY-1500HB

Bracket

HY-1500HW HY-1200HB HY-1200HW

HY-1500VB HY-1500VW HY-1200VB HY-1200VW

Mounting Brackets for Ceiling

Stand Mounting

HY-C0801*

HY-C0801W*

ST-33B

Speaker Stand

Mounting Brackets for Wall

HY-W0801*

HY-W0801W*

* in combination with HY-1200 / HY-1500 series brackets

37


Compact Array Speakers

HX-5B / HX-5W

HX-5B-WP / HX-5W-WP

• Innovative modular speaker design includes four preassembled

modules with four LF drivers and twelve HF dome tweeters

• Adjustable dispersion angle to 60, 45, 30 or 15 degrees

• Improved intelligibility through tailored coverage

• In-line driver arrangement for superior vertical coverage control

• Contoured waveguide-baffle for distortion-free coverage control

• High power handling: 600 W cont. (200 W, pink noise)

• Stack up to four units for improved coverage control

• Lightweight polypropylene construction

• Weather-resistant versions (HX-5B-WP / HX-5W-WP)

• Parallel connectors - dual speakon and screw terminal

• Vertical or horizontal mounting

• Built-in surface-mount bracket

• Colour: black (HX-5B / HX-5B-WP) or white (HX-5W /HX-5W-WP)








FB-120B / FB-120W





































• Compact Subwoofer (30 cm / 12“)

• Ideal in conjunction with HX-5 speaker

• Extremely wide frequency range


• For floor-, wall-, corner- or ceiling-mount

• 600 W continuous program high-power subwoofer

system

• Carry handle

• For rigging



• Colour: black (FB-120B) or white (FB-120W)

• Matching Rigging Frame:

HY-PF1B (black) or

HY-PF1W (white)













Model HX-5B HX-5W HX-5B-WP HX-5W-WP FB-120B / FB-120W

Enclosure Bass-reflex type Bass-reflex type Sealed type Sealed type Subwoofer

Power Handling Capacity

Continuous pink noise: 200 W, Continuous program: 600 W

Rated Impedance

8 Ω

Sensitivity (1 W, 1 m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) 90 dB

Frequency Response 70 - 20,000 Hz (–10 dB) (60° mode) 95 - 20,000 Hz (–10 dB) (60°mode) 40 - 1,200 Hz (–10 dB)

75 - 20,000 Hz (–10 dB) (45°mode) 100 - 20,000 Hz (–10 dB) (45°mode)

80 - 20,000 Hz (–10 dB) (30°mode) 105 - 20,000 Hz (–10 dB) (30°mode)

85 - 20,000 Hz (–10 dB) (15°mode) 110 - 20,000 Hz (–10 dB) (15°mode)

Crossover Frequency 4 kHz –

Directivity Angle Horizontal: 100°(over 2,000 Hz) Vertical: 60°(over 800 Hz), 45°(over 1.2 kHz), –

30°(over 1.6 kHz), 15°(over 3.2 kHz) variable

Speaker Component Low frequency: 12 cm cone-type x 4, High frequency: balanced dome-type x 12 30 cm cone-type speaker

Water Protection – – IPx4 (Install with every speaker module downward) –

Dimensions (W x H x D) 408 x 546 x 342 408 x 546 x 342 408 x 546 x 342 408 x 546 x 342 408 × 408 × 450 mm

Weight 16 kg 16 kg 16 kg 16 kg 15 kg

38


Mounting Accessories

For HX-5B:

HY-PF1B

Rigging Frame

for indoor use

HY-CW1B

Ceiling Mounting Bracket

for indoor use

HY-WM1B

Mounting Bracket

for indoor use

HY-WM2B

Mounting Bracket

for indoor use

HY-CN1B

Extension Bracket

for indoor use

For HX-5W:

HY-PF1W

Rigging Frame

for indoor use

HY-CW1W

Ceiling Mounting Bracket

for indoor use

HY-WM1W

Mounting Bracket

for indoor use

HY-WM2W

Mounting Bracket

for indoor use

HY-CN1W

Extension Bracket

for indoor use

For HX-5B-WP and HX-5W-WP:

HY-PF1WP

Rigging Frame

for outdoor use

HY-CW1WP

Ceiling Mounting Bracket

for outdoor use

HY-WM1WP

Mounting Bracket

for outdoor use

HY-WM2WP

Mounting Bracket

for outdoor use

HY-CN1W-WP

Extension Bracket

for outdoor use of

HX-5W-WP

HY-CN1B-WP

Extension Bracket

for outdoor use of

HX-5B-WP

For HX-5 Series:

HY-ST1

Speaker Stand

Adapter

MT-200

Matching

Transformer

ST-33B

Speaker

Stand

39


Conference Systems

Infrared Conference Systems

TS-800 Series / TS-900 Series

• For efficient communications in each kind of

conference

• System with voting function (TS-900) or

standard system (TS-800)

• Safe and secure infrared wireless technology

• Compact and lightweight chairman and

delegate units

• Up to 96 active units (TS-900) or 64 active

units (TS-800) per system

• No cabling makes installation easy

• Chairman unit features a priority speech key

• Speaker restriction function

• Auto Mic-Off function

• Installation status checkup function

• Conference control software available

TS-900 Series System Example

Infrared

Transmitter/Receiver unit

TS-905

Secretariat

Headphone

Headphone

Operation PC

Recording equipment

External control

Recording output

AUX3 input

Line output

MIC1 input

MIC2 input

Central unit

TS-900

Infrared

Transmitter/Receiver

input/output

Distributor

YW-1024

Up to

16 units

Sound source equipment

YW-1024

PA amplifier

Audience

Chairman

Delegate

Interpreter

(English

interpretation)

Wired microphone

(Japanese

interpretation)

Wired microphone

Speaker

Standard

microphone

TS-903

Chairman’s unit

TS-901

Long microphone

TS-904

Delegate’s unit

TS-902

Long microphone

TS-904

Delegate’s unit

TS-902

Speaker

Up to 96 units

*Chairman and Delegate units require lithium-ion battery BP-900 or AC adapter AD-0910.

Secretariat

Chairman

Interpreter

(Japanese interpretation)

(English interpretation)

Delegate

Audience

40


TS-900 Series

TS-900

Central Unit

TS-901

Chairman’s Unit

• 2 channels for 2 languages

• For bilingual conferencing and voting with

triple choice vote function

• For efficient communication in each kind of

conference

• Conference control software available

• Safe and sure infrared wireless technology with

good coverage

• Compact and lightweight chairman and

delegate units

• Up to 96 units per system

• No cabling makes installation easy

• Chairman unit features a priority speech key

• Speaker restriction function

• Auto mic-off function / installation status

checkup function

• Improved security from eavesdropping or

annoying crosstalk

• Flexible and easy configuration in different rooms

and with varied participant numbers

• Exceptional sound quality

TS-902

Delegate’s Unit

TS-901

• Attractive unit equipped with mic (removable),

speaker and priority switch

• 2 different versions for chairman (TS-901) and

delegates (TS-902)

• 3 voting keys

• Channel selector for conference language

• When the speaker is on, the mic of this unit is

automatically turned off to avoid feedback and

vice versa

• 1 recording output

• Ring shaped in-use LED

• Multiple chairman’s units can be operated

simultaneous

• Priority speech for chairman's unit

• Easy hook-up

Model TS-900 TS-901 TS-902

Power Requirements 220/230V AC, 50 / 60 Hz (selectable) 7.4 V DC (battery) or 9 V DC (option. AC adapter AD-0910)

Power Consumption Max. 72 W 270 mA

Input Mic: 600 Ω, -60 dBV, AUX: 10 kΩ, -20 dBV, Microphone terminal: Combined type of XLR-4-31 (dedicated

unbalanced, phone jack,

for connecting the optional TS-903 or TS-904)

Output Recording; 10 kΩ, -20 dBV, unbal., phone jack, RCA pin jack Monitor speaker: 8 Ω, 0.2 W, Headphone: 2 x Mini jack

Control Speaker restriction can be set to 1,2 or 4 Speech button, priority button Speech button

Mic off function; off, 20 sec., 40 sec., (selectable) 3 voting buttons 3 voting buttons

Speach priority selector

External Control Terminal D-sub connector (9 P, male) –

No of Connectable IR Units 4 (TS-905 / TS-907, up to 16 units by using 4 x YX-1024) –

No of Connectable Units Max. 96 (TS-901 and 902) –

Dimensions (WxHxD) 359 x 118.8 x 179.8 mm 210 x 65.9 x 152 mm

Finish Panel: Surface-treated steel plate, grey metallic paint, semi-gloss Top panel: ABS resin, grey metallic, paint, semi-matte

Weight 2.8 kg 640 g

Accessory AC adapter (Cord length: 1.8 m DC cord + 2 m detach. AC cord) –

Option

Microphone: TS-903 / TS-904

41


TS-800 Series

TS-800

Central Unit

• Conference control software available

• Compact and lightweight chairman and

delegate units

• Up to 64 active units per system

• No cabling makes installation easy

• Chairman's unit features a priority speech key

• Speaker restriction function

• Auto mic-off function

• Installation status checkup function

• Very good coverage of transceivers

• Improved security from eavesdropping or

annoying crosstalk

• Flexible and easy configuration in different rooms

and with varied participant numbers

• Exceptional sound quality

Audio input from a wired microphone or other

sound source

• Colour: Panel grey metallic

TS-801

Chairman’s Unit

TS-802

Delegate’s Unit

• Attractive unit with optional mic (removable),

speaker and priority switch

• 2 different versions for chairman (TS-801) and

delegates (TS-802)

• When the speaker is on, the mic of this

unit is automatically turned off to avoid feedback

and vice versa

• One recording output

• Ring shaped in-use LED

• Multiple chairman’s units can be operated

simultaneously

• Priority speech for chairman's unit

• Easy hook-up

TS-801

Model TS-800 TS-801 TS-802

Power Requirements 220/230 V AC, 50/60 Hz (selectable) 7.4 V DC (battery) or 9 V DC (option. AC adapter AD-0910)

Power Consumption Max. 72 W 270 mA

Input Mic: 600 Ω, -60 dBV, AUX : 10 kΩ, -20 dBV, Microphone terminal: Combined type of XLR-4-31 (dedicated

unbalanced, phone jack,

for connecting the optional TS-903 or TS-904)

Output Recording; 10 kΩ, -20 dBV, unbal., phone jack, RCA pin jack Monitor speaker: 8 Ω, 0.2 W. Headphone: Mini jack x2

Control Speaker restriction can be set to 1,2 or 4 Speech button, priority button Speech button

Mic off function; off, 20 sec., 40 sec., (selectable)

Speach priority selector

External Control Terminal D-sub connector (9 P, male) –

No of Connectable IR Units 4 (TS-905 / TS-907, up to 16 units by using 4 x YX-1024) –

No of Connectable Units Max. 64 (TS-801 and 802) –

Dimensions (WxHxD) 359 x 118.8 x 179.8 210 x 65.9 x 152

Finish Panel: Surface-treated steel plate, grey metallic paint, semi-gloss Top panel: ABS resin, grey metallic, paint, semi-matte

Weight 2.7 kg 630 g

Accessory AC adapter (Cord length: 1.8 m DC cord + 2 m detach. AC cord) –

Option

Microphone: TS-903 / TS-904

42


TS-800 Series System Example

Secretariat

Recording equipment

Wired microphone

Recording output

MIC input

AUX input

Central unit

TS-800

Infrared

Transmitter/Receiver

input/output

Distributor

YW-1024

Infrared

Transmitter/Receiver unit

TS-905

Up to

16 units

Sound source equipment

Chairman

Delegate

YW-1024

Standard

microphone

TS-903

Long microphone

TS-904

Long microphone

TS-904

Chairman unit

TS-801

Delegate unit

TS-802

Delegate unit

TS-802

Up to 64 units *Chairman and Delegate units require lithium-ion battery BP-900 or AC adapter AD-0910.

Accessories for TS-800 Series and TS-900 Series

AD-0910

AC Adapter

For chairman’s unit and

delegate's unit AC

operation

BC-900

Battery Charger

For up to 8 BP-900 Lithium-

Ion Batteries (optional) to

be simultaneously charged

within up to 5 hours

TK-906A / TK-908A*

Carrying Cases

BP-900

Lithium-Ion Battery

• TK-908A: Carrying case

for 8 units, 2 transceivers

battery charger, batteries

and microphones

• TK-906A: Carrying case

for center amplifier,

6 units, 1 transceiver,

battery charger, batteries

and microphones

• For chairman’s unit and

delegate's units

TS-903 (short) / TS-904 (long)

Microphones

MB-TS900

Rack-mount Bracket

• Electret condenser

microphones

• Applicable to both

chairman’s unit and

delegate's unit

• TS-903: 368 mm long

TS-904: 518 mm long

TS-905 / TS-907

Infrared Transmitter / Receiver Units

YW-1022 / YW-1024

Distributor

• TS-905 with 150° (vert.)

x 360° (hor.) reception

angle

• TS-907 with 90° (vert.)

x 360° (hor.) reception

angle

• YW-1022

(to 2 outputs)

• YW-1024

(to 4 outputs)

43


Wired Conference Systems

Compact wired conference system with a capacity of up to 210 units. Remote participation via phone or internet is possible.

Clear sound, easy set up and convenient storage are selfunderstanding.

TS-770

Central Unit

TS-771

Chairman’s Unit

• Supplies DC Power to all units,

with lamp indicator

• Jack for microphone input, and AUX input

• Microphone, AUX, line (for conference unit’s

built-in speaker) and chime (on chairman’s unit)

volume controls

• Delegate’s unit simultaneous operation (1,3, or

6) and automatic mic-off setting (OFF/20-sec/40-

sec) switches

• Line 1 & 2 output connection terminals each for

35 conference units.

• Equalizer Input

• System expandable to 210 units by connection of

3 central units (70 units per central unit)

TS-772

TS-771 with optional

microphone TS-773

Delegate’s Unit

• Built-in speaker

• A ring-shaped LED on the optional microphone

indicates that the microphone is on

• To prevent howling, the built-in speaker is turned

off while the microphone is on

• Press-to-talk priority speech button activates

chime and overrides delegate’s unit (TS-771 only)

• Press-to-talk button

• Recording output mini-jack for connection to a

recording device

• Multiple simultaneous chairman’s units operation

possible

• 8P quick-lock type mini-DIN socket

• Long or short gooseneck microphone (optional)

TS-772 with optional

long microphone TS-774

Model TS-770 TS-771 TS-772

Power Requirements 220 / 230 V AC, 50/60 Hz (selectable) 35 V DC, under 30 mA supplied from central unit

Power Consumption Max. 60 W –

Input Mic: 600 Ω, -60 dBV, AUX 1: 10 kΩ, -20 dBV, –

unbalanced, phone jack,

Output Recording; 10 kΩ, -20 dBV, unbal, phone jack, 2x pin jack Recording: 10 kΩ, -20 dBV, unbalanced, mini jack

Internal speaker: 130 Ω, 200 mW, headphone: 32 Ω

Contact output: 24 V DC, max 50 mA (open collector output)

Control Speaker restriction can be set to 1,3 or 6 / automatic Speech button, priority button Speech button

mic-off function; off, 20 sec., 40 sec., (selectable)

chime button

Number of Connectable Max. 70 units per TS-770 / max. 35 units per line – –

Conference Units

(max. 210 units with 3 x TS-770)

Dimensions (W x H x D) 210 x 107.1 x 316 mm 114.5 x 78.4 x 152.9 mm

Finish Case: Pre-coated steel plate, black, 30% gloss, aluminum panel Case: ABS resin, black; panel: gray metallic, semi-gloss paint

Weight 4 kg 780 g

Standard Accessories Power cord x 1 –

Option Extension cable: YR-770-2M / YR-770-10M Microphone: TS-773 / TS-774

44


TS-775

Remote Delegate Interface

• For connection of external delegates via

telephone, IP telephone (up to 70 PCs

per TS-770) mobile phone

• Speech method selectable

• Handset connector on the front

• Handset type selectable

• Control output

• Line input for other conference units

Model

TS-775

Power Supply

35 V DC (supplied from optional center amplifier)

Cuurrent Consumption

< 30 mA

Input

-60 dBV, 200 Ω; balanced; mini phone jack with VR control

Output

-60 dBV, 22 Ω; balanced; mini phone jack with VR control

Speech Method

Auto: Voice-activated automatic switching,

Manual: Talk-key activated

Operating Temperature 0°C to + 40°C

Operating Humidity

Under 90% RH

Finish

Pre-coated steel plate, black

Dimensions (W x H x D) 160 x 41.8 x 100

Weight

700 g

Accessories for TS-770 series

TK-776 / TK-778

Carrying and Storage Case

TK-776: for 1 Central Unit, 8 Units and the cables.

TK-778: for 12 Units and the cables

YR-770-2M / YR-770-10M

Extension Cables

For connection of a TS-770

expansion amplifier or the

connection of two conference

units. 8 pin DIN socket / DIN

plug. 2 m (YR-770-2M) or

10 m (YR-770-10M) long

TS-773 / TS-774

Microphones for TS-771 and TS-772

TS-773: 368 mm

TS-774: 518 mm

The microphones fit both:

chairman's and delegate's unit

45


TS-770 Series System Example

TS-770 Central Unit

TS-770 Central Unit

TS-771 Chairman’s Unit

TS-772 Delegate’s Units

Max. 70 units per Central Unit

TS-775 Remote Delegate

Interface Unit

TS-771 Chairman’s Unit

TS-772 Delegate’s Unit

Handset Modular

Connector

Telephone Body

TS-770 Central Unit

Telephone

PABX

C/O

TS-775 Remote Delegate

Interface Unit

TS-771 Chairman’s Unit

TS-772 Delegate’s Unit

PC

Internet

PC

46 46


Megaphones

Hand-held Megaphones

ER-520 / ER-520W / ER-520S (10 W)

ER-520 / 520W





• Compact, lightweight megaphone with

instant-on amplifier and howl-free dynamic

microphone with press-to-talk (PTT) switch

• Operates on 8 R6 type (AA) batteries

• Horn and enclosure from ABS resin

• Horn: white, strap black, others grey

• ER-520W with built-in whistle

• ER-520S with siren, horn red

ER-520S

Model ER-520 ER-520W ER-520S

Power 10 W 10 W 10 W

Signals - Whistle Siren

Audible Range (Voice) approx. 250 m approx. 250 m approx. 250 m

Batteries 8 x 1.5 V (AA) 8 x 1.5 V (AA) 8 x 1.5 V (AA)

Battery Life (Hours) 10 10 10

With Signal - 30 min. 40 min.

Dimensions 160 x 256 x 260 mm 160 x 256 x 260 mm 160 x 256 x 260 mm

Weight (Without Batteries) 620 g 650 g 650 g

ER-1215 / ER-1215S / ER-3215 (23 W)

ER-1215






• Compact, lightweight megaphone with

instant-on amplifier and howl free dynamic

microphone with press-to-talk (PTT) switch

• Operates on 6 R14 type (C) batteries

• Sanitary antibacterial treatment

• Horn: white; strap black; others grey

• ER-1215S with built-in siren

• Enclosure: red (ER-1215S); horn: light grey;

other: grey

ER-1215S





ER-3215








Model ER-1215 ER-1215S ER-3215

Power 23 W 23 W 23 W

Signals - Siren -

Audible Range (Approx.) 315 m 315 m (500 m siren) 400 m

Batteries 6 x 1.5 V (R 14) 6 x 1.5 V (R 14) 6 x 1.5 V (R 14)

Battery Life (Hours) 14 14 9

With Signal - 20 min. -

Dimensions (W x H x D) 210 x 291 x 346 210 x 291 x 346 210 x 291 x 381

Weight (Without Batteries) 1.1 kg 1.2 kg 1.3 kg

47


Shoulder Type Megaphones

ER-2215 / ER-2215W (23 W)

• Power megaphone with instant-on amplifier and hand held howl free dynamic

microphone with press-to-talk switch

• ER-2215W with whistle

• Operates on 6 R14 type (C) batteries

• Sanitary antibacterial treatment

• Colour: off-white

ER-2215

ER-2230W (45 W)

• Power megaphone with instant-on amplifier and hand held howl free dynamic

microphone with press-to-talk switch

• ER-2230W with built-in whistle

• Operates on 6 R14 type (C) batteries

• Sanitary antibacterial treatment

• Colour: off-white

ER-2930W (45 W)

• Compact megaphone with hand-held howl free microphone

• Connection of microphone headset (optional WH-4000A/4000H) or

hand-held microphone possible. For stand mounting, e.g. on ST-16A

• Aux input, e.g. for CD

• Operation with 12 V adaptor (optional) or battery

• Enclosure: white; strap: black

Model ER-2215 ER-2215W ER-2230W ER-2930W

Power max. 23 W 23 W 45 W 45 W

Signal - Whistle Whistle Whistle

Audible Range Approx. 400 m Approx. 500 m (whistle) Approx. 1000 m (whistle) Approx. 1000 m (whistle)

Batteries 6 x 1.5 V (R14) 6 x 1.5 V (R14) 10 x1.5V (R20P)/ext. 12V adapter 10x1.5 V(R20P)/ext. 12V adapter

Battery Life 9 h 9 h / Signal 20 min. 17 h / Signal 1.5 h 17 h / Signal 1.5 h

Dimensions ø 210 x 336 ø 210 x 336 ø 351 x 512 ø 351 x 512

Weight (Without Batteries) 1.2 kg 1.3 kg 3.75 kg 3.95 kg

WM-4210 / WM-5320

UHF microphones

for ER-2930W

WTU-4800

Tuner module for

ER-2930W

Audible Range

Voice Whistle Siren

ER-604W

0 125 250 500 750 1000m

ST-16A

Stand for shoulder type

megaphones

ER-520

ER-520W

ER-520S

ER-1215

ER-1215S

0 250 500 750 1000m

ER-2215

ER-2215W

ER-3215

ER-2930W

ER-2230W

0 250 500 750 1000m

48


TECHNICAL COLUMN

MICROPHONES

MICROPHONES

Wiring of Microphones

Output from a microphone is rather weak; therefore it is important

to use shielded cables for microphones to prevent line noise. The

low impedance shielded cable intended for microphones are

commercially available. The shielded cable is generally used to

transmit the audio signals from microphones ( -70 dB / 0.3 mV)

or source equipment (0 dB / 1 V).

Balanced and unbalanced type

Shielded cable

(single core)

Shielded cable

(double core)

COM or

ground

COM or

ground

(HOT)

(HOT)

Unbalanced microphone plug

(COLD)

Balanced microphone plug

Unbalanced amp.

input

Balanced amp.

input

Signal

(HOT)

Signal

(COLD)

Signal

(HOT)

Balanced and Unbalanced Output

There are two kinds of output from a microphone: balanced and

unbalanced. With balanced output, the audio signal appears

between the hot (on-going audio signal) and cold (return audio

signal), which are both independent of the ground. With unbalanced

output, the audio signal appears between the hot and ground

(connected to the cold). The connection between balanced output

and balanced input (on the amplifier side) is virtually unaffected by

external line noise, and it is used for wiring between long distances.

Double-cored shielded cable is used for connecting.

balanced outputs, and single-cored shielded cable is used for

connecting unbalanced outputs.

(a) Balanced

Connection

(b) Unbalanced

Connection

Microphone

Microphone

Microphone cord

(double-cored shielded cable)

HOT

COLD

(G)

Connection to microphone body

Microphone cord

(single-cored shielded cable)

HOT

COLD

(G)

Distance of Extension for Microphone Cords

The following table shows the maximum extension distance for

microphone cords. When distance extends beyond the following

figures, excessive noise will make the microphone impractical, and

therefore it will be necessary to use a microphone mixer to boost

the signal level to minimize the influence of noise.

HOT

COLD

Microphone Output Amplifier Input Microphone Cord

Extension Distance

Unbalanced

Balanced

Balanced

Unbalanced

Unbalanced

Balanced

20 m

20 m

80 m

HOT

COLD

(G)

(G)

Amplifier

Amplifier

Speakers

Rough guide for noise levels and audio levels

necessary for loudspeaker (for all types of speakers)

Noise levels are expressed in decibels (dB). Below are some

typical examples..

Noise level (dB) 50 60 70 80 90

Inside a

movie theatre

Normal office,

restaurant,

hotel lobby

Can be undestood speaking in a normal voice

Noisy office,

department store,

super market

Printing plant

Must raise

one’s voice to

be understood

Heavy- industry plant

Must yell just

to be heard

When transmitting voice or music through a speaker, it is

necessary to transmit at a level that is higher than the ambient

noise level. In the case of voice transmission, it should be

transmitted at a level 5 to 10 dB higher than the noise level,

background music 3 to 5 dB higher, and foreground music 15 to 20

dB higher.

Computation of Intensity of Sound

As an index to express the intensity of sound from a speaker,

sound-pressure level (in dB) is generally used. The soundpressure

level rises as the electric input to the speaker increases,

and falls as distance from the speaker increases. This relationship

is shown by the following formula:

Attenuation of SPL

SPL (dB) = SPL (1W/1m) -

due to distance

+

Amount of increase of

SPL due to electric input

The SPL (1 W / 1 m) indicates the sound pressure level at a point

1 meter away from a speaker when an alectric input of 1 W is

applied to that speaker. This is used to express comparative

speaker efficiency, such as in a catalog.

Attenuation of SPL due to distance

(amount of attenuation = 20 log D

D: distance in meters from speaker)

Distance (m) 2 5 10 15 20 30 40 60 80 100

Amount of

6.0 14.0 20.0 23.5 26.0 29.5 32.0 35.6 38.1 40.0

attenuation (dB)

Increase of SPL due to electric input

(amount of increase =10 log W W: electric input)

Electric input (W)

Amount of

increase (dB)

Example of calculation:

1 1.5 3 5 6 10 15 20 30 50

0 2.6 4.8 7.0 7.8 10 11.8 13 14.8 17

The SPL(1w/1m) of the model TC-154SM is shown as 112 dB. The soundpressure

level of this model at distance of 10 meters with an input of 10 W can

be calculated as follows according to the above table:

SPL = 112 dB - 20 dB (10m) + 10 dB (10W) = 102 dB

Arrangement of Speakers in a General Office

(Ceiling Speakers)

Ceiling-mounted speakers are generally used and their coverage

angle is between 90 and 120 degrees. The smaller the distance

between speakers, the better the sound quality and the more even

the sound volume. The following table shows the area that can be

covered by one speaker.

23

49


TECHNICAL COLUMN

Arrangement of Speakers

Area of Coverage of one Speaker

Purpose

90 - 120

Background Music

Announcement

Distance between speaker

Height of Ceiling

Less than 2.5 m

2.5 - 4.5 m

4.5 - 15 m

Height of ceiling

For general office use not to include background music, speakers

should be arranged about 9 to 12 meters apart. Shown below is

an example of speaker arrangement in a 30 m x 20 m office with

ceiling height of 3 m, which indicates that this office requires about

6 speakers.

1 m

Height of ears

Distance between Artea of Coverage

Speakers of one Speaker

5 m

About 25 m 2

6 m

About 36 m 2

9 m

About 81 m 2

9 to 12 m 81 to 144 m 2

Arrangement of Speakers in a Factory (Horn Speakers)

Factories with high noise levels generally use horn speakers,

which can produce high levels of sound. If you know where the

working stations are located speakers can be arranged accordingly.

If the location of the work stations is unknown, speakers should

be arranged in accordance with the floor space.

Here is an example of a 40 m x 90 m room in a factory with a noise

level af 85 dB. In this factory , TC-615M speakers are installed;

therefore, the sound pressure that can be obtained at a point 20

meters away with electric input of 15 W will be:

[112 dB (1 W/1 m) - 26.0 dB (20 m) + 1.8 dB (15 W)] = 97.8 dB

This is a sufficient sound pressure level, 10 dB higher than the

noise level. The speakers are installed 20 to 30 meters apart, and

6 speakers can generally cover the area.The sound pressure level

near speakers is rather high, so it is necessary to install the

speakers at a height of more than 4 meters.

40 m

97.8 dB

TC-615M

input rated 15W

Noise level of 85 dB

(neccesary sound-pressure level of 95 dB)

Example of arrangement

20 m

Office of 30 m x 20 m with 3 m ceiling

without music

Number of speakers necessary: 6 to 8

15 m 30 m 30 m 15 m

90 m

Speaker Wiring

For speaker connections, use 600V vinyl (PVC) insulated wire of

1.2mm to 1.6mm in diameter (AWG17 to AWG 14)

30 m

Amplifiers

High-Impedance Connection and Low-Impedance

Connection

The PA amplifiers generally come with low-impedance speaker

outputs (indicated as 4 , 8 , 16 , etc) and high-impedance

outputs (indicated as 70V, 100V, etc). Low-impedance output is

used when a small number of speakers (1 to 4) is used and there

is a short distance (10-some meters) between amplifiers and

speakers. High-impedance output is used with a large number of

speakers and a longer distance of wiring. Speakers with

transformers are used for high-impedance output. For a PA

system: high impedance connection should be used if possible, in

consideration of wrong speaker connections and transmission

efficiency.

Example of low-impedance connection:

It is necessary to design the total speaker input impedance to be larger than the

amplifier output impedance. When the total speaker impedance is lower than the

amplifier output impedance, unstable operation or amplifier malfunction may result.

The wiring distance between amplifier and speaker should be less than 10-some

meters. If the wiring distance is greater than this, the output power from the amplifier

will be consumed as heat in the cables, and not be able to supply the speaker with

sufficient power.

Example of High-Impedance Connection:

In a PA system to cover a large area, the wiring distance will be greater, so high

impedance connection is used predominantly. In high-impedance connection, alll

speakers (each with a transformer) will be connected in parallel. Avoid using these

speakers together with those without transformers.

In high-impedance connection, as long as you have parallel connection. It will be

sufficient to design the total speaker input to be lower than the amplifier output, and

this will help eliminate complex impedance calculation.

60W

100 V Output

10W

1 k H 1 k H

(10W/

100V line)

C

(10W/

100V line)

Amplifier output 60 W = total speaker input (60 W)

C

10W

1 k

(10W/

100V line)

10W

H

Speaker input impedance (10W/100 V line)

100 (V)

Z =

2

= 1 k

10 (W)

Amplifier output Total impedance of

impedance

speakers

1

100 (V) 2 Z =

Z = = 167 () 1

+

1

+

1

+

1

+

1

+

1

60 (W)

1 k() 1 k() 1 k() 1 k() 1 k() 1 k()

C

= 167 ()

4 Output

4

H

C

Even when connecting speakers with different inputs, there will be no problem as

long as the total wattage of the speakers does not exceed the amplifier output.

Total impedance H H

4 Output of speakers 8 8

4

C C

1

4 =

1 1

+

8 8

120W

100 V Output

1.7 k

(6W/

100V line)

H

C

6W

1.7 k H

(6W/

C

100V line)

6W

1.7 k

(6W/

100V line)

6W 30W

H 330 H

C

(30W/

C

100V line)

330

(30W/

100V line)

H

C

30W

50

8 Output

Total impedance

of speakers

8

8

8

H

C

H

C

8

8

H

C

H

C

8 =

8

1

1

+

+ 8 8

1

+ 8

Amplifier output

impedance

100 (V) 2

Z = = 83 ()

120 (W)

Total impedance of speakers

1

Z =

1 1 1 1 1

+ + + +

1.7 k() 1.7 k() 1.7 k() 330 () 330 ()

Amplifier output 120 W > total speaker input (78 W)

= 128 ()

24


Application Example 1

Supermarket

43 m

Office

AT-12UP

PM-660

Ceiling Speaker

A-2060

Cashier

20 m

Warehouse

Deposit Counter

• Background music

• Announcements / paging from the office

• Volume control for the office

PM-660

A-2060

CD

Ceiling Speaker x 18

Ceiling Speaker x 1 (Office)

Factory

35 m

Office

Canteen

Ceiling Speaker

SC-615M

AT-12UP / AT-50 UP

EC-100M or PM-660

A-1812

*1) Meeting room

*1

25 m

• Music distribution during recess

• Annnouncements with chime

• Selectable paging area

Outdoor area

CD

A-1812

Radio

Zone 1

Paging from

PABX via

Telephone Input

PM-660

Zone 2

10 W

1,5 W

1,5 W

1,5 W

10 W

SC-615M x 8 (Hall)

Ceiling Speaker x 2 (Office)

Ceiling speaker x 1 (Meeting Room)

Ceiling speaker x 4 (Canteen)

SC-615M x 3 (Outdoor area)

51


Application Example 2

OFFICE

30 m

Executive Offices

Ceiling Speaker

AT-12UP

EC-100M

A-2030

Meeting

Room

16 m

Reception

Office Area

• Emergency paging possible (5 m distance among the speakers)

• Announcements with chime from the reception

• One speaker for each room

• Individual adjustment of the volume in each office room

A-2030

Ceiling Speakers

x 1 x 6 x 2 x 7

Receiption one per office Meeting room Staff area

GYMNASIUM

Changing Room

32 m

Gymnastic Area

AT-12UP

Ceiling Speaker

EC-100M

F-2000BT

A-2120 and A-2060

20 m

Resting Area

Reception

• Good Sound Quality

• Wireless Microphones for the Instructor

• Announcements from the reception

WM-5320A

Aerobics

Microphone

CD / Cassette

WT-5810

A-2120

F-2000BT x 4

Gymnastic Area

Cassette

A-2060

Ceiling Speaker x 11

Changing Room / Resting Area

Ceiling Speaker x 2

Receiption

52


Application Exemple 3

Mosque

20 m

EM-400

DM-1300

BS-1030B

A-2240 / P-2240

TH-650

20 m

• Separate outdoor sound (e.g. from

minaret or paging, etc.)

• Separate volume controls for indoor

and outdoor

DM-1300

EM-400

A-2240

BS-1030B x 8

P-2240

TH-650 x 4

TU-650M x 4

Church

20 m

DM-1300

WM-5310

BS-1030W + WCB-12W or BS-1110 / 1120

A-2240

Cassette / CD Player

15 m

DM-1300

DM-1500

• Good sound quality

• Clear and intelligible speech transmission

• Wireless microphones for free movement

A-2240

WM-5310

WT-5810

F-2000BT x 6

Cassette / CD

53


A

Index

A-1706 15

A-1712 15

A-1724 15

A-1803 14

A-1806 14

A-1812 14

A-2030 13

A-2060 13

A-2120 13

A-2240 13

AC-120 32

AD-0910 43

AT-063P 29

AT-12UP 29

AT-12UPR 29

AT-303P 29

AT-50UP 29

AT-50UPR 29

AT-603P 29

B

BC-900 43

BP-900 43

BS-1030B 20

BS-1030W 20

BS-1034 21

BS-1034S 21

BS-1110 20

BS-1120 20

BS-633A 21

BS-633AT 21

BS-634 21

BS-634S 21

BS-678 21

BS-680F 21

BS-680FC 21

C

CA-107 17

CA-115 17

CA-130 17

CA-160 17

CA-207 17

CA-407 17

CS-154 24

CS-304 24

CS-64 24

D

DM-1100 4

DM-1200 4

DM-1200D 4

DM-1300 4

DM-1500 5

DM-524B 5

DM-524S 5

E

EC-100M 6

EM-400 4

ER-1215 47

ER-1215S 47

ER-2215 48

ER-2215W 48

ER-2230W 48

ER-2930W 48

ER-3215 47

ER-520 47

ER-520S 47

ER-520W 47

EV-20R 12

F

F-1000B 33

F-1000BT 33

F-1000BTWP 33

F-1000W 33

F-1000WT 33

F-1000WTWP 33

F-122C 31

F-1300B 33

F-1300BT 33

F-1300BTWP 33

F-1300W 33

F-1300WT 33

F-1300WTWP 33

F-1522SC 32

F-2000B 34

F-2000BT 34

F-2000BTWP 34

F-2000W 34

F-2000WT 34

F-2000WTWP 34

F-2322C 31

F-2352C 31

F-2352SC 32

F-2852C 31

FB-100 35

FB-120B 35, 38

FB-120W 35, 38

H

H-1 30

H-2 30

H-2WP 30

H-3 30

H-3WP 30

HB-1 30, 35

HS-1200BT 36

HS-1200WT 36

HS-120B 36

HS-120W 36

HX-5B 38

HX-5B-WP 38

HX-5W 38

HX-5W-WP 38

HY-1200HB 37

HY-1200HW 37

HY-1200VB 37

HY-1200VW 37

HY-1500HB 37

HY-1500HW 37

HY-1500VB 37

HY-1500VW 37

HY- AH1 32

HY-BC1 32

HY-BH10B 35

HY-C0801 37

HY-C0801W 37

HY-CL10B 35

HY-CL10W 35

HY-CL20B 35

HY-CL20W 35

HY-CM10B 35

HY-CM10W 35

HY-CM20B 35

HY-CM20W 35

HY-CN1B 39

HY-CN1W 39

HY-CN1W-WP 39

HY-CW1B 39

HY-CW1W 39

HY-CW1WP 39

HY-PF1B 39

HY-PF1W 39

HY-PF1WP 39

HY-ST1 39

HY-TB1 32

HY-TR1 32

HY-W0801 37

HY-WM1B 39

HY-WM1W 39

HY-WM1WP 39

HY-WM2B 39

HY-WM2W 39

HY-WM2WP 39

M

MB-15B 9

MB-TS-900 43

MB-TS900 43

MB-WT3 9

MB-WT4 9

MT-200 39

MX-628 16

P

P-1812 14

P-2240 13

PC-1867F 19

PC-1867FC 19

PC-1869 18

PC-2369 18

PC-2668 19

PC-2852 18

54


Index

PC-2869 18

PC-643S 19

PC-644S 19

PC-645R 19

PC-646R 19

PE-304 22

PE-64 22

PGW-6 29

PGW-6R 29

PJ-100W 23

PJ-200W 23

PJ-304 23

PJ-64 23

PM-120 6

PM-20EV 12

PM-222 6

PM-660 6

PM-660D 6

R

RU-2001 7

RU-2002 7

S

SC-610 27

SC-610M 27

SC-615 27

SC-615M 27

SC-630 27

SC-630M 27

SC-651 27

SP-410 20

SP-420 20

ST-16A 20, 35, 48

ST-311B 7

ST-312B 7

ST-33B 37

ST-506 7

ST-507 7

ST-65A 7

ST-66A 7

ST-73A 5

T

TC-615 26

TC-615M 26

TC-631 26

TC-631M 26

TH-650 28

TH-660 28

TK-776 45

TK-778 45

TK-906A 43

TK-908A 43

TS-770 44

TS-771 44

TS-772 44

TS-773 45

TS-774 45

TS-775 45

TS-800 42

TS-801 42

TS-802 42

TS-900 41

TS-901 41

TS-902 41

TS-903 43

TS-904 43

TS-905 43

TS-907 43

TU-631 28

TU-631M 28

TU-651 28

TU-651M 28

TZ-105 25

TZ-205 25

TZ-301 25

U

UP-MV-206 29

W

WA-1822 10

WA-1822C 10

WD-4800 9

WM-3210 11

WM-3220 11

WM-3310 11

WM-3310H 11

WM-4200 8

WM-4210 8, 48

WM-5220 8

WM-5270 8

WM-5320 8, 48

WM-5320A 8

WM-5320H 8

WS-200 10

WS-300 10

WS-300H 10

WS-5200 10

WS-5300 10

WS-5300H 10

WT-3800 11

WT-3810 11

WT-4820 9

WT-5800 9

WT-5805 9

WT-5810 9

WTU-3800 11

WTU-4800 9, 48

Y

YM-121 7

YR-770-10M 45

YR-770-2M 45

YW-1022 43

YW-1024 43

YW-3800 11

YW-4800 9

Z

ZM-104 29

© TOA Electronics Europe GmbH

(0810) 833TEEC176 Specifications are subject to change without prior notice. Errors excepted.

51


www.toa.eu

More magazines by this user
Similar magazines