Views
5 years ago

T2 Brochure - Stryker

T2 Brochure - Stryker

Features & Benefits

Features & Benefits Ankle Arthrodesis Nail Easy Insertion • Cannulated Design • Unreamed or Reamed Insertion over 3×1000mm Guide Wire • No Guide Wire exchange required Anatomical Fit • 5° lateral (valgus) bend • Partially threaded Locking Screw • Up to 5 mm active compression Controlled Apposition/ Compression • L/M Direction • Partially threaded Locking Screw • Up to 5mm active compression • Cannulated Compression Screw for direct insertion over the Guide Wire or in “preloaded” manner Stable Fixation • M/L direction • Fixed angle threaded Aiming Adapter An additional Aiming Adapter can be attached to the Targeting Device to help achieve the appropriate rotation based on the position of the PA Calcaneal Screw aligned with the Anatomic Calcaneal body axis. 18 Proximal Locking Options • Target device guided • M/L direction • Proximal locking configuration features a round and an oblong hole to allow for static or dynamic locking Multiple End Caps End Caps are available in different sizes to provide improved fit for every indication and to lock down on the PA Calacneus Screw. This creates a fixed angle between the nail and Locking Screw. • Driving end 7.5mm • End Cap locks P/A Calcaneus Locking Screw Anatomical Fit Distal Locking Screw in P/A direction with a proximal one in a 10° angle from postero-medial to anterolateral. This design dictates the need for left and right nails but allows for anatomical fit with internal compression. This technique is preferred because of higher union rates, shorter fusion times, and fewer complications. anterior 10° lateral medial View from distal

Ordering Information - Implants T2 Standard Ankle Arthrodesis Nail 5.0mm Fully Threaded Locking Screws End Caps Standard +5mm +10mm +15mm Left REF Diameter Length mm mm 1818-1015S 10 150 1818-1020S 10 200 1818-1030S 10 300 1818-1115S 11 150 1818-1120S 11 200 1818-1130S 11 300 1818-1215S 12 150 1818-1220S 12 200 1818-1230S 12 300 Titanium Diameter Length REF mm mm 18 9 6 -5025S 5.0 25.0 1896-5027S 5.0 27.5 18 9 6 -5030S 5.0 30.0 18 9 6 -5032S 5.0 32.5 18 9 6 -5035S 5.0 35.0 18 9 6 -5037S 5.0 37.5 18 9 6 -5040S 5.0 40.0 18 9 6 -5042S 5.0 42.5 18 9 6 -5045S 5.0 45.0 18 9 6 -5047S 5.0 47.5 18 9 6 -5050S 5.0 50.0 18 9 6 -5052S 5.0 52.5 18 9 6 -5055S 5.0 55.0 18 9 6 -5057S 5.0 57.5 18 9 6 -5060S 5.0 60.0 1896-5065S 5.0 65.0 1896-5070S 5.0 70.0 1896-5075S 5.0 75.0 1896-5080S 5.0 80.0 1896-5085S 5.0 85.0 1896-5090S 5.0 90.0 1896-5095S 5.0 95.0 1896-5100S 5.0 100.0 1896-5105S 5.0 105.0 1896-5110S 5.0 110.0 1896-5115S 5.0 115.0 1896-5120S 5.0 120.0 Titanium Diameter Length REF mm mm 1826-0003S 8.0 4.0 1818-0005S 12.0 + 5 1818-0010S 12.0 +10 1818-0015S 12.0 +15 19 Right REF Diameter Length mm mm 1819-1015S 10 150 1819-1020S 10 200 1819-1030S 10 300 1819-1115S 11 150 1819-1120S 11 200 1819-1130S 11 300 1819-1215S 12 150 1819-1220S 12 200 1819-1230S 12 300 5.0mm Partially Threaded Locking Screws Titanium Diameter Length REF mm mm 1891-5025S 5.0 25 1891-5030S 5.0 30 1891-5035S 5.0 35 1891-5040S 5.0 40 1891-5045S 5.0 45 1891-5050S 5.0 50 1891-5055S 5.0 55 1891-5060S 5.0 60 1891-5065S 5.0 65 1891-5070S 5.0 70 1891-5075S 5.0 75 1891-5080S 5.0 80 1891-5085S 5.0 85 1891-5090S 5.0 90 1891-5095S 5.0 95 1891-5100S 5.0 100 1891-5105S 5.0 105 1891-5110S 5.0 110 1891-5115S 5.0 115 1891-5120S 5.0 120 Compression Screw (cannulated) Titanium Diameter Length REF mm mm 1818-0001S 8.0 14.5

Reference Guide for • Upper-Face • Mid-Face ... - Stryker
Matta PLATING BROCHURE - Stryker do Brasil