Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Please visit<br />
www.commandaccess.com<br />
for more details<br />
OPTIONAL ACCESSORIES FOR MORTISE LOCKS<br />
EZ-REX<br />
- Field Installable Request-to-Exit switch (for Schlage L9000 and Command<br />
Access ML1 series mortise locks) - Easy snap-in installation - Sends a signal<br />
to alert the control panel that the door is about to be opened by someone<br />
exiting from within the secured area<br />
SWITCHES*<br />
Factory installed signalling switches are SPDT and available for the<br />
following applications:<br />
- REX - Request-to-Exit switch available<br />
- DPS - Door Position switch (see matrix below for brand availability)<br />
- LBM - Latchbolt Monitor switch (see matrix below for brand availability)<br />
- DBM - Deadbolt Monitor switch (see matrix below for brand availability)<br />
* For additional switch options refer to specification page at www.commandacess.com<br />
CURRENT REDUCTION UNITS<br />
(see page 21 for full specifications)<br />
Command Access current reduction units are recommended for all “fail safe” or<br />
“extended unlock cycle” applications to reduce heat and extend solenoid life<br />
- CRU2i - Intelligently detects 12 to 30VAC/DC input voltage and converts it to<br />
operate our 12V locks<br />
- CRU2 - Manually adjustable module allows the installer to fine tune the holding<br />
current and maximize the efficiency of our 12 or 24VAC/DC mortise locks<br />
CRU2i<br />
CRU2<br />
MORTISE LOCK MODIFICATION AND INVENTORY CHART<br />
To find out what mechanical chassis<br />
model #’s are used for modifications,<br />
go to www.commandaccess.com<br />
Brand modified 2<br />
Baldwin<br />
Best<br />
Cal Royal<br />
Command Access<br />
Corbin Russwin<br />
Design Hardware<br />
Falcon<br />
Sargent<br />
Schlage<br />
Yale<br />
MLB51/53<br />
ML45D<br />
ML8080<br />
ML180<br />
ML03/05<br />
ML86<br />
ML51/81<br />
ML370/371<br />
ML80<br />
ML90/91<br />
Storeroom<br />
ML170<br />
ML337<br />
ML70<br />
Classroom<br />
ML45W<br />
ML182<br />
ML01/04<br />
ML88<br />
ML11/21<br />
ML372/373<br />
ML82<br />
ML94/95<br />
Institution<br />
Entrance w/deadbolt<br />
Request-to-Exit (REX)<br />
Door Position (DPS)<br />
Latchbolt Monitor (LBM)<br />
Deadbolt Monitor (DBM)<br />
Chassis only<br />
Electrified Functions Optional Switches In-stock Trim In-stock Finishes<br />
• 1<br />
ML453D<br />
ML8053<br />
ML153<br />
ML87<br />
ML651/681<br />
ML53<br />
ML148<br />
ML48<br />
Privacy w/deadbolt (EU only)<br />
626 (Brushed Chrome)<br />
613 (Oil Rubbed Bronze)<br />
625 (Polished Chrome)<br />
Other<br />
• •<br />
• • • • • • • • • •<br />
• • •<br />
Call for availability<br />
• • • • • • • • • • •<br />
• • • • • • • • • •<br />
• • • • •<br />
• • • •<br />
• • • • • • • • • • •<br />
• • • • • • • • • • • •<br />
• • • • • • • •<br />
630<br />
605/606/<br />
612<br />
NOTE: 1. Mulitple configurations available (see website for details).<br />
2. Call factory for current safety agency listings.<br />
Command Access is not a licensee or affiliated, associated or connected with Assa Abloy, Dorma, Ingersoll Rand, Stanley Security, Adams Rite, Arrow, Corbin Russwin, Mckinney, Pemko,<br />
Rixson, Sargent, Yale, Dor-O-matic, Falcon, Ives, Monarch, Schlage, Von Duprin, Best, Precision, Accurate, AHT, Baldwin, Bommer, Cal Royal, CR Laurence, Design Hardware, Emtek, First<br />
Choice, FSB, General Lock, Hager, Jackson, Keedex, Lawrence, LSDA, Marks, Marshal-Best, Molex, Omnia, PBB, PDQ, Ramco, TA West, Trans Atlantic or any of their subsidiaries or affiliates.<br />
5