RAIDWatch User's Manual

RAIDWatch User’s Manual
Step 7. Install the Java-based GUI RAIDWatch manager main program. An
install shield will be prompted on the screen. Please refer to Section
3.4.5 for step-by-step installation procedures.
3.4.4 Installing RAIDWatch on a Solaris Platform
Follow these steps to install RAIDWatch on your server(s) and RAID
subsystems:
Step 1. Insert the Infortrend product CD or RAIDWatch installation CD into
the systems CD-ROM drive.
Step 2. If you are currently running other applications, close them before
proceeding with the setup process. This will minimize the possibility
of encountering system errors during setup.
Step 3. Be sure to install JRE 1.4.2 or above version on your server.
Running older version of Java runtime may cause a failure of the
RAIDWatch main program installation.
Step 4. When the File Manager window pops up on the screen, doubleclick
the file “unix.sh.” (See Figure 3-3)
Figure 3-3: File Manager Window in Solaris Platform
Step 5. A Run window prompt will display. (See Figure 3-4) To install the
Java-based GUI RAIDWatch manager main program, type YES and
then press Enter. This will launch RAIDWatch manager install
shield. Please refer to Section 3.4.5 for step-by-step installation
procedures.
3-8 Software Setup