PDF chant catalogue artwork.indd - Hardware Direct

More documents

Recommendations

Info

chant product finishes chant Product Finishes These colours are indicative only, subject to limitations in the printing process. Polished Chrome Plate/PCP Layers of bright nickel and chrome on a polished surface. Satin Chrome Plate Velvet/SCPV Layers of satin nickel and chrome on a polished surface. Satin Chrome Plate Brushed/SCPB Layers of bright nickel and chrome on a brushed surface. Sand Polished Chrome/SPC This is a shot-blasted finish providing a textured surface, which is then polished chrome plated. Black Chrome/BC A durable, deep black, polished black chrome finish. Satin Black Chrome/SBC A durable, satin black chrome finish. Gold/GLD 22 carat gold plate finish with a rich gold colour. Standard thickness is 0.5 micron. Finish Options All hardware is available in Combination or Split finishes. Combination Finishes Individual components of different finishes are assembled into a lever or pull handle, ie. satin chrome plate velvet lever and rose cover and polished chrome plate rose and handle boss. Split Finishes This is where different sections of a pull or lever handle can be processed in two finishes. The blend between the finishes can be ‘crisp’ along a ridge line, or ‘soft’ over a contoured area of the handle, eg. combination of sand polished chrome and polished chrome. Contact chant to discuss your requirements. 4
Original finish Examples of natural patinas which occur over time Bronze Metal and “Living Finishes” All of our products are made of brass as the base metal, which is used for the electroplated finishes, including copper and satin nickel plate. Almost all of our products are also available in bronze as the base metal. Refer to page 119 for more detailed information on Living Finishes. Polished Bronze/PBZ This will age naturally and develop its own patina over time depending on the prevailing climatic conditions and wear patterns. The ultimate finish will be a rich semi-gloss bronze patina surface, often showing the random grain structure of the bronze. Satin Bronze Aged/SBZA The surface is satin finished by brushing, then aged to provide a matt bronze surface. The colour of this finish will, over time, adjust to its own natural satin patina depending upon the prevailing climatic conditions and wear patterns. chant product finishes Weathered Bronze/WBZ A bead-blasted surface on bronze, then aged to provide a matt bronze surface. The colour of this finish will also continue to evolve over time. Sand Bronze Aged/SABA A shot-blasted surface on bronze, then aged to provide a matt bronze, textured surface. The colour of this finish will also continue to evolve over time. Earth Bronze/EBZ A unique process creating a random spectrum of earthy hues. Colour will naturally vary from product to product (we would recommend that a physical sample is sighted, before specifying). Charcoal Bronze/CBZ This deep, matt ‘coloured’ dark grey finish is the outcome of a specialised process on bronze metal. Copper Plate/COP A thick copper layer plated onto the base metal, left uncoated, which will acquire a rich red-brown patina over time. Weathered Copper/WCOP A thick copper layer plated onto the base metal, then bead-blasted and ‘aged’ to a matt red-brown colour, which will continue to evolve a natural patina over time. Satin Nickel Plate/SNP A layer of satin nickel on a polished surface. It will oxidise to a minor degree over time, please refer to additional information, “Living Finishes” on page 119. Polished Brass Uncoated/PBU This will need polishing with proprietary metal cleaners to maintain the surface, or left to age naturally to a yellow-brown patina. 5
Page 2 and 3: www.chantproductions.com
Page 4 and 5: www.chantproductions.com Visit our
Page 8: Mason Swim PM12 Pull Handle
Page 12 and 13: Samba Pull Handles Samba PM00 -1200
Page 14 and 15: Swim Pull Handles Swim PM09 Swim PM
Page 16 and 17: Nile Pull Handles Nile PM20 -1000 N
Page 18 and 19: Comma Pull Handles Comma PM31 Comma
Page 21 and 22: Mason Nile PM24 Lever Handle
Page 23 and 24: Rib PM48 Rib PM44 Rib PM42 21
Page 25 and 26: River PM54 River PM51 23
Page 27 and 28: Flute PM64 Flute PM63 Flute PM61 25
Page 29 and 30: PM100 PM104 PM101 PM105 PM102 PM107
Page 31: For information on Mason Lever Hand
Page 34: chant More about chant chant is a m
Page 37 and 38: Bow 504 Bow 511-F Bow 502 35
Page 39 and 40: Sabre 524 Sabre 531-F Sabre 522 37
Page 41 and 42: Arc 544 Arc 551-F Arc 542 39
Page 43 and 44: Luna 564 Luna 571-R Luna 562 41
Page 46 and 47: Cobra Pull Handles Cobra 600 Cobra
Page 48 and 49: Delta Pull and Cabinet Handles Delt
Page 50 and 51: Swan 651 Lever Handle The Swan Leve
Page 52 and 53: Cubic Pull and Cabinet Handles Cubi
Page 54 and 55: Line Pull and Cabinet Handles Line
Page 57 and 58:
chant Line 691 Lever Handle on Tall
Page 59 and 60:
Line 3213 Line 3443 Line 3952 57
Page 61 and 62:
Angle 711 on C Rose Angle 717 Angle
Page 63 and 64:
Rod 731 on Rose Rod 723 Rod 721 61
Page 65 and 66:
Stop 751 Cabinet Knob Diameter 35mm
Page 67 and 68:
Round 763 on 44mm Plate Diameter 55
Page 69 and 70:
Rebate Packer E Rebate Deadbolt Str
Page 71 and 72:
Radius Facet Square Pyramid Line An
Page 74 and 75:
72 accessories
Page 76 and 77:
Push Plates accessories push plates
Page 78 and 79:
accessories flush pulls Style 1 Sty
Page 80 and 81:
Style 1 Style 2 Style 3 Privacy Flu
Page 82 and 83:
accessories XXXX flush sliding bolt
Page 84 and 85:
accessories flush sliding bolts Flu
Page 86 and 87:
square bolts Socket Bolt 2810 Socke
Page 88 and 89:
Hinge 100 x 75mm Hinge 100 x 75mm w
Page 90 and 91:
Comma 3901 Comma 3902 Comma 3904 Ca
Page 92 and 93:
mortice locks & latches accessories
Page 94 and 95:
Mortice Latch 1011/1012/1013 Mortic
Page 96 and 97:
mortice locks & latches accessories
Page 98 and 99:
Mortice Roller Latch 1061 Mortice R
Page 100 and 101:
accessories twin bolts Twin Bolts T
Page 102 and 103:
accessories cylinders & turns Profi
Page 104:
chant Arc 542 Pull Handle
Page 107 and 108:
Handing of Handles The world genera
Page 109 and 110:
32mm wide Plates Outside Plates - C
Page 111 and 112:
44mm wide Plates Handles on these p
Page 113 and 114:
Mounting Option 3 Surface Fixed (SF
Page 115 and 116:
Cross section of a lever handle fas
Page 117 and 118:
Lock Morticing Machine 6005 Designe
Page 119 and 120:
This series of Jigs complement the
Page 121 and 122:
Finish Options All hardware is avai
Page 123 and 124:
chant notes
show all

PDF chant catalogue artwork.indd - Hardware Direct

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?