29-635 Rover 25/45 - www.incartec.co.u
29-635 Rover 25/45 - www.incartec.co.u
29-635 Rover 25/45 - www.incartec.co.u
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
E-Mail: sales@<strong>incartec</strong>.<strong>co</strong>.uk<br />
Website: <strong>www</strong>.<strong>incartec</strong>.<strong>co</strong>.uk<br />
Steering Control Adapter <strong>29</strong>–<strong>635</strong><br />
<strong>Rover</strong> <strong>25</strong>/<strong>45</strong> (00-02)<br />
10<br />
To head-unit<br />
To<br />
Car<br />
17<br />
1-ALWAYS CONNECT THE<br />
HEAD-UNIT CABLE ADAPTER 1st<br />
before ignition is turned on!<br />
1 3 5<br />
7<br />
9<br />
11<br />
13<br />
15<br />
If purple wire does not mate to a wire in pin<br />
17 in the car then remove steering <strong>co</strong>wling<br />
and <strong>co</strong>nnect to pin 2 on 6 way <strong>co</strong>nnector .<br />
<strong>29</strong>-00 USC<br />
Software version<br />
V1.60 or above<br />
1st<br />
2 4 6 8<br />
10 12<br />
14<br />
16<br />
1. Choose a head-unit adapter from the list overleaf and <strong>co</strong>nnect it to the USC black box.<br />
2. Turn off the ignition supply to the car!<br />
3. Remove the OEM head-unit and identify the audio <strong>co</strong>nnector and ensure it mates <strong>co</strong>rrectly<br />
with the <strong>co</strong>nnector supplied with the <strong>29</strong> series cable.<br />
4. Connect the <strong>29</strong> series cable to the car and to the ISO <strong>co</strong>nnectors on the new radio.<br />
5. Check that the red wire is a 12V IGNITION source in the car then turn on ignition<br />
6. Test unit before fully fitting radio and trims back.<br />
7. If unit does not work, <strong>co</strong>nnect purple wire beneath steering <strong>co</strong>lumn as shown.<br />
+12v<br />
IGN<br />
-12v<br />
GND<br />
RC1<br />
+<br />
RC<br />
-<br />
Check to ensure that the<br />
USC 16 pin <strong>co</strong>nnector is<br />
wired as above<br />
Car<br />
identity<br />
Dongle<br />
If Problems: Check that <strong>co</strong>rrect adapter has been used and links are in the <strong>co</strong>rrect place. Always dis<strong>co</strong>nnect from the power supply if you<br />
change the head-unit adapter lead. Check that Red wire is 12V ignition and not Permanent power. Check that head-unit is earthed and black<br />
wire is earth. Check all <strong>co</strong>nnections are the same as the wiring diagram shown here<br />
E-Mail: sales@<strong>incartec</strong>.<strong>co</strong>.uk<br />
Website: <strong>www</strong>.<strong>incartec</strong>.<strong>co</strong>.uk<br />
Steering Control Adapter <strong>29</strong>–<strong>635</strong><br />
<strong>Rover</strong> <strong>25</strong>/<strong>45</strong> (00-02)<br />
10<br />
To head-unit<br />
To<br />
Car<br />
17<br />
1-ALWAYS CONNECT THE<br />
HEAD-UNIT CABLE ADAPTER 1st<br />
before ignition is turned on!<br />
1 3 5<br />
7<br />
9<br />
11<br />
13<br />
15<br />
If purple wire does not mate to a wire in pin<br />
17 in the car then remove steering <strong>co</strong>wling<br />
and <strong>co</strong>nnect to pin 2 on 6 way <strong>co</strong>nnector .<br />
<strong>29</strong>-00 USC<br />
Software version<br />
V1.60 or above<br />
1st<br />
2 4 6 8<br />
10 12<br />
14<br />
16<br />
1. Choose a head-unit adapter from the list overleaf and <strong>co</strong>nnect it to the USC black box.<br />
2. Turn off the ignition supply to the car!<br />
3. Remove the OEM head-unit and identify the audio <strong>co</strong>nnector and ensure it mates <strong>co</strong>rrectly<br />
with the <strong>co</strong>nnector supplied with the <strong>29</strong> series cable.<br />
4. Connect the <strong>29</strong> series cable to the car and to the ISO <strong>co</strong>nnectors on the new radio.<br />
5. Check that the red wire is a 12V IGNITION source in the car then turn on ignition<br />
6. Test unit before fully fitting radio and trims back.<br />
7. If unit does not work, <strong>co</strong>nnect purple wire beneath steering <strong>co</strong>lumn as shown.<br />
+12v<br />
IGN<br />
-12v<br />
GND<br />
RC1<br />
+<br />
RC<br />
-<br />
Check to ensure that the<br />
USC 16 pin <strong>co</strong>nnector is<br />
wired as above<br />
Car<br />
identity<br />
Dongle<br />
If Problems: Check that <strong>co</strong>rrect adapter has been used and links are in the <strong>co</strong>rrect place. Always dis<strong>co</strong>nnect from the power supply if you<br />
change the head-unit adapter lead. Check that Red wire is 12V ignition and not Permanent power. Check that head-unit is earthed and black<br />
wire is earth. Check all <strong>co</strong>nnections are the same as the wiring diagram shown here
CHOOSE THE CORRECT HEAD-UNIT ADAPTER FROM THOSE BELOW<br />
<strong>29</strong>-001 Alpine <strong>29</strong>-002 Blaupunkt <strong>29</strong>-003 Clarion <strong>29</strong>-004 JVC<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
<strong>29</strong>-005 Kenwood<br />
Single wire<br />
<strong>29</strong>-005D Kenwood<br />
4 pin DIN Plug<br />
<strong>29</strong>-006 Panasonic<br />
Standard CD units<br />
<strong>29</strong>-006A Panasonic<br />
AV head-units<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
<strong>29</strong>-009 Siemens<br />
VDO<br />
<strong>29</strong>-008 Sony<br />
3v & 5v units<br />
<strong>29</strong>-011 Zenec<br />
<strong>29</strong>-020 Pioneer &<br />
Sony<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
Special external drive<br />
PCB version<br />
CHOOSE THE CORRECT HEAD-UNIT ADAPTER FROM THOSE BELOW<br />
<strong>29</strong>-001 Alpine <strong>29</strong>-002 Blaupunkt <strong>29</strong>-003 Clarion <strong>29</strong>-004 JVC<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
<strong>29</strong>-005 Kenwood<br />
Single wire<br />
<strong>29</strong>-005D Kenwood<br />
4 pin DIN Plug<br />
<strong>29</strong>-006 Panasonic<br />
Standard CD units<br />
<strong>29</strong>-006A Panasonic<br />
AV head-units<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
<strong>29</strong>-009 Siemens<br />
VDO<br />
<strong>29</strong>-008 Sony<br />
3v & 5v units<br />
<strong>29</strong>-011 Zenec<br />
<strong>29</strong>-020 Pioneer &<br />
Sony<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
1 3 5 7<br />
9<br />
11<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
2 4 6 8<br />
10<br />
12<br />
Special external drive<br />
PCB version