Chemical Reference Standards AccuStandard®

Petrochemical ASTM Standards
ASTM D-5480 Engine Oil Volatility by GC
Stock Column Resolution Standard
D-5480-CR-PAK
Each comp. at 10 µg/mL in CS 2
D-5480-CR-100X-PAK
Each comp. at 1000 µg/mL in CS 2
n-Decane
n-Dodecane
n-Hexadecane
n-Octadecane
n-Tetracosane
$ 40 / 5 x 1 mL
5 comps.
$ 50 / 5 x 1 mL
5 comps.
Internal Standard Solution
D-5480-IS-5ML
D-5480-IS-5ML-PAK
Each comp. at equal weights
n-Decane
n-Undecane
n-Dodecane
Tetracosane (Solution A)
D-5480-C40-5ML
D-5480-C40-5ML-PAK
Originally designed for D-5480-95
$ 30 / 1 x 5 mL
SAVE $ 120 / 5 x 5 mL
3 comps.
$ 15 / 1 x 5 mL
SAVE $ 60 / 5 x 5 mL
500 µg/mL in CS 2
n-Tetracosane
ASTM D-5482 & D-5191 Vapor Pressure Standards
Vapor Pressure Quality Control Samples
Originally designed for D-5482-99 & D-5191-99
Technical Note
Consists of pure solvents with
known vapor pressure.
Cat. No. Vapor Pressure Price / Set of 10
ASTM-P-124-01 68.3kPa (9.91 psi) $ 65 / 10 x 10 mL
ASTM-P-124-02 68.0kPa (9.86 psi) 75 / 10 x 10 mL
ASTM-P-124-03 51.1kPa (7.41 psi) 70 / 10 x 10 mL
ASTM-P-124-04 46.7kPa (6.77 psi) 125 / 10 x 10 mL
ASTM-P-124-05 22.5kPa (3.26 psi) 50 / 10 x 10 mL
ASTM-P-124-06 7.1kPa (1.03 psi) 50 / 10 x 10 mL
ASTM Standards
ASTM D-5501 Ethanol Content of Denatured Fuel Ethanol by GC
Denatured Fuel Ethanol Calibration Set
D-5501-94-SET
$ 75 / set of 7 x 1 mL
Cat. No. Comp.1 Wt./ Wt.% Comp.2 Wt./ Wt.% Comp.3 Wt./ Wt.% Unit
D-5501-94-01 Ethanol 92 Methanol 0.6 Heptane 7.4 1 x 1 mL
D-5501-94-02 Ethanol 93 Methanol 0.5 Heptane 6.5 1 x 1 mL
D-5501-94-03 Ethanol 94 Methanol 0.4 Heptane 5.6 1 x 1 mL
D-5501-94-04 Ethanol 95 Methanol 0.3 Heptane 4.7 1 x 1 mL
D-5501-94-05 Ethanol 96 Methanol 0.2 Heptane 3.8 1 x 1 mL
D-5501-94-06 Ethanol 97 Methanol 0.1 Heptane 2.9 1 x 1 mL
D-5501-94-07 Ethanol 98 Methanol 0.05 Heptane 1.95 1 x 1 mL
Originally designed for D-5501-94
ASTM D-5580 Benzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C 9 and
Heavier Aromatics, & Total Aromatics in Finished Gasoline by GC
Originally designed for D-5580-00
Aromatics Quantitative Calibration Mixes (without Internal Standard)
D-5580-95-CAL-SET-10ML
$ 300 / set of 5 x 10 mL of 6 component mix
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5
Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 0.10 - 5.00 0.10 0.50 1.00 2.00 5.00
Toluene 1.00 - 15.00 15.00 10.00 5.00 2.50 1.00
Ethylbenzene 0.50 - 10.00 0.50 1.00 2.50 5.00 10.00
o-Xylene 0.50 - 10.00 1.00 2.50 10.00 5.00 0.50
1,2,4-Trimethylbenzene 0.50 - 10.00 1.00 10.00 0.50 5.00 2.50
Isooctane 82.40 76.00 81.00 80.50 81.00
Aromatics Quantitative Calibration Mixes (with Internal Standard)
D-5580-95-CAL-IS-SET
$ 100 / set of 5 x 1 mL of 7 component mix
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5
Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 0.09 - 4.50 0.09 0.45 0.90 1.80 4.50
Toluene 0.90 - 13.50 13.50 9.00 4.50 2.25 0.90
Ethylbenzene 0.45 - 9.00 0.45 0.90 2.25 4.50 9.00
o-Xylene 0.45 - 9.00 0.90 2.25 9.00 4.50 0.45
1,2,4-Trimethylbenzene 0.45 - 9.00 0.90 9.00 0.45 4.50 2.25
2-Hexanone (Internal Std.) 10.00 10.00 10.00 10.00 10.00
Isooctane 74.16 68.40 72.90 72.45 72.90
ASTM D-5580-00 Continued
on the Next Page
160
AccuStandard’s Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard