User's manual - Sup'Air
User's manual - Sup'Air
User's manual - Sup'Air
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Reserve parachute pocket : characteristics<br />
Reserve assembly<br />
Thank you for carefully reading the following! We advise you to have<br />
the initial rescue parachute installation done by someone knowledgeable<br />
with the process.<br />
• 2 side pockets with 4 flaps. One to the right and one to the left,<br />
symettrically located.<br />
• Cable locking system.<br />
• Volume : 3 to 8 liters.<br />
• Compatible with the SUPAIR LIGHT or X-TRALITE reserve parachutes<br />
as well other solo models.<br />
Handle to POD connection.<br />
1 2<br />
1. Attach the handle to the POD central webbing passage and make a<br />
loop to loop configuration.<br />
2. Tighten the loop to loop connection, then check the overall integrity of<br />
the assembly.<br />
Connecting the Dyneema risers to the reserve parachute.<br />
Connecting each of the 2 reserve parachutes<br />
Dyneema riser sets with a loop to loop configuration.<br />
x2<br />
The handle must be connected to<br />
the central POD loop.<br />
SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe. SUP’AIR _SKYPPERFR Page 13