16.01.2015 Views

Quick Start Guide RC3

Quick Start Guide RC3

Quick Start Guide RC3

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Quick</strong> <strong>Start</strong> <strong>Guide</strong> <strong>RC3</strong>


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

Thank you for choosing DIVUS KNXSUPERIO (PLUS)!<br />

This document should give you a short overview to KNXSUPERIO (PLUS).<br />

Don't consider it a manual, since KNXSUPERIO (PLUS) was conceived in a way<br />

that its configuration and usage doesn't require any sophisticated<br />

documentation. All information is integrated in the interface, at critical<br />

passages pop-ups and help pages will assist you. This document should only get<br />

you an overview to KNXSUPERIO (PLUS) and disclose you the possibilities of<br />

this product.<br />

Further information can be found in the internet (www.divus.eu), for specific<br />

questions you can also refer to our technical support:<br />

Phone: 0039/0471 631570<br />

Mail:<br />

support@divus.eu<br />

Page 2/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

1. The product<br />

The following images show detail views of KNXSUPERIO (PLUS) and get you an<br />

overview to the available interfaces:<br />

Front view:<br />

7<br />

1 2<br />

1. Microphone (only PLUS)<br />

2. Speaker (only PLUS)<br />

3. Proximity sensor (only<br />

PLUS)<br />

4. IR sensor (only PLUS)<br />

5. Status LEDs (only PLUS)<br />

6. Power switch<br />

7. Web camera (optional, only<br />

PLUS)<br />

3 4<br />

6<br />

5<br />

Rear view:<br />

9<br />

1 1<br />

2<br />

2<br />

3 4 5 6 7 8<br />

1. Mounting support<br />

2. Line In / Out<br />

3. 2x USB<br />

4. RS232/422/485<br />

5. Analogue Video In<br />

6. 2x LAN<br />

7. 8x GPIO<br />

8. Power (230VAC)<br />

9. KNX interface<br />

1 1<br />

Page 3/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

2. The interface<br />

With the new DIVUS OPTIMA interface KNXSUPERIO (PLUS) offers you the<br />

perfect fusion of intuitive usability and functionality. The visualized contents<br />

can be adjusted optimally to your needs, moreover you have the possibility to<br />

attain access to all the functions of the interface in a matter of seconds through<br />

the symbols at the edge of the display area. The following screenshot describes<br />

the available functions:<br />

Date / Time<br />

Shows date and system time of<br />

KNXSUPERIO (PLUS). All configured<br />

timers and schedule functions use this<br />

values as reference.<br />

Alarm clock<br />

Create up to 8 alarm clocks which can<br />

be assigned to the singular days of the<br />

week. KNXSUPERIO (PLUS) reminds you<br />

of important appointments or can just<br />

be used as your daily alarm buzzer.<br />

Cleaning function<br />

<strong>Start</strong>s a cleaning mode which locks all<br />

inputs of the touch screen. In this way<br />

accidental operation during the cleaning<br />

can be excluded. The cleaning mode is<br />

deactivated automatically after one<br />

minute.<br />

User login<br />

This button allows to quickly switch<br />

between the configured users.<br />

Page 4/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

OnScreen keyboard<br />

Permits to fade in / out an onscreen<br />

keyboard that can be used through the<br />

touch screen. The onscreen keyboard<br />

can be used in order to make text inputs<br />

within the OPTIMA interface.<br />

Pin<br />

This function disables the automatic<br />

return to the Home page. This can be<br />

useful if you want to make permanent<br />

the visualization of a certain page of<br />

your project or of one of the plug-ins. In<br />

this case, just navigate to the desired<br />

page and activate the pin symbol.<br />

Home button<br />

This is the primary button of the<br />

OPTIMA interface. It allows you not only<br />

to return to the Home page, but after a<br />

long click (3 seconds) it will also open<br />

the „<strong>Quick</strong>Navigator“, which enables a<br />

quick access to all the pages of your<br />

visualization.<br />

3. Touch gestures<br />

Plug-in menu<br />

Permits to access the integrated plug-ins<br />

(like for example weather preview,<br />

family board or intercom function). On<br />

the following pages you will find more<br />

information regarding the individual<br />

plug-ins.<br />

Indicator<br />

Shows you the name of the visualized<br />

page / plug-in. This guarantees<br />

maximum overview and prevents you<br />

from getting lost.<br />

Page changer<br />

Permits to quickly pass from one page<br />

of your visualization to the next. This<br />

elements can be used as alternative to<br />

the „Swipe“-gesture, which is<br />

explained in the following chapter.<br />

Administration menu<br />

This button allows accessing the<br />

administrator menu of the OPTIMA<br />

interface, which permits to change<br />

various parameters and settings.<br />

In order to keep the usage of KNXSUPERIO (PLUS) as simple and intuitive as<br />

possible, the interface implements so-called touch gestures. These should help<br />

the user with the navigation and make functions faster and simpler accessible.<br />

The following touch gestures have been integrated in OPTIMA <strong>RC3</strong>:<br />

„Swipe“<br />

This gesture can be used to change between the pages of your visualization. Simply<br />

move your finger along the desired direction on the touch screen and you will<br />

automatically get to the next page. The same functionality can be obtained by using the<br />

page changer elements mentioned before.<br />

„LongClick“<br />

If used on the Home button or on the KNX functions of your visualization, this gesture<br />

can be used to activate special functions. A „LongClick“ on the Home button launches<br />

the <strong>Quick</strong>Navigator, meanwhile a „LongClick” on a KNX function opens a context menu<br />

with further options. Both special functions are explained in the next chapter.<br />

Page 5/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

„Scroll“<br />

Unlike traditional scrolling through scrollbars or arrow buttons, DIVUS OPTIMA allows<br />

you to scroll at any position. In pages, whose contents are not completely visualized,<br />

simply move the finger in the desired direction over the touch screen in order to<br />

execute the corresponding scroll movement.<br />

„Drag&Drop“<br />

This gesture is used above all in the wizard and allows you to move objects from one<br />

place to another. Use Drag&Drop in order to assign KNX functions to the corresponding<br />

rooms / pages or to rearrange the disposal of the rooms / pages.<br />

4. <strong>Quick</strong>Navigator and context menu<br />

As mentioned before, the „LongClick“ gesture can be used to activate special<br />

functions:<br />

„LongClick“ on Home button:<br />

The <strong>Quick</strong>Navigator is a pop-up window which offers you<br />

the possibility to jump directly to the single pages of your<br />

visualization. Therefore you don't have to go through your<br />

complete visualization in order to reach the last page, but<br />

you can also do this directly through the <strong>Quick</strong>Navigator.<br />

„LongClick“ on KNX function:<br />

Just like the <strong>Quick</strong>Navigator, also the context menu of KNX functions<br />

is opened as pop-up window in consequence of a "LongClick" gesture.<br />

In OPTIMA <strong>RC3</strong> the context menu can be used for example to add<br />

functions to the Home page or to schedule the selected function.<br />

These functions are accessible to all users.<br />

Page 6/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

5. The administration menu<br />

The administration menu of KNXSUPERIO (PLUS) is used to configure and maintain<br />

the OPTIMA interface. Many of the contained menus and settings are accessible<br />

only to the installer, just a few of them are accessible also to the final user of<br />

KNXSUPERIO (PLUS). Below you can find an overview of the contained menus:<br />

OPTIMA wizard (access restricted to installer):<br />

This novel wizard was created to bring you from your ETS project to a complete visualization<br />

within the shortest possible time. The wizard is self-explanatory and offers a lot of help<br />

functions, which means that the wizard can also be managed by KNX newcomers. Just try it<br />

out… you will be surprised!<br />

Touch calibration (free access):<br />

If there should ever be any inaccuracies during the usage of the touch screen, you can use this<br />

menu in order to re-calibrate the touch screen.<br />

Theme configuration (free access):<br />

Here you can change the language of the displayed menus and dialogs. DIVUS OPTIMA <strong>RC3</strong> is<br />

available in German, Italian and English.<br />

Network configuration (access restricted to installer):<br />

This menu can be used to adjust the network settings of KNXSUPERIO (PLUS), in order to<br />

configure internet access or to activate the remote access to the administration menu.<br />

Diagnostics (free access):<br />

This page allows you to create and export a detailed diagnostic report. If you should<br />

encounter any problems / errors / bugs within the OPTIMA interface, just send us the created<br />

report and we can assist you within the shortest period of time.<br />

Software update (access restricted to installer):<br />

This menu allows you to load updates and new functionalities for the OPTIMA interface. All<br />

future versions of the interface will be backward compatible and can be loaded using this<br />

menu.<br />

Database management (access restricted to installer):<br />

At completion of the visualization you can create a backup copy of your project. It is even<br />

possible to transfer backups from one KNXSUPERIO (PLUS) to another. And if a project once<br />

shouldn’t meet your requirements, you can even use this menus in order to bring<br />

KNXSUPERIO (PLUS) back to factory defaults.<br />

System configuration (free access):<br />

Change the date and time settings of KNXSUPERIO. If you dispose of a working internet<br />

connection, you can synchronize these settings with an online time server.<br />

Page 7/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

License and modules management (access restricted to installer):<br />

In this page, beneath the serial number of KNXSUPERIO (PLUS) you can also find the<br />

installed and licensed modules / functionalities. If you by additional modules, you will get a<br />

license code which can be entered in this page in order to activate the new functionalities.<br />

Furthermore you can use this page to modify the parameters of the modules, like for<br />

example the physical address of the device (by marking the “eib” checkbox and selecting<br />

the edit button).<br />

Save all changes (free access):<br />

A click on this symbol makes sure that all the changes that were made to the system will be<br />

stored within the persistent memory of KNXSUPERIO (PLUS). THIS IS NECESSARY FOR EVERY<br />

CHANGE YOU WANT TO MAKE TO THE SYSTEM THROUGH THE ADMINISTRATION MENU!<br />

Mail configuration (access restricted to installer):<br />

Set the parameters of your mail account. In this way, KNXSUPERIO (PLUS) can be used to<br />

send out event-triggered mail notifications.<br />

Screensaver configuration (free access):<br />

In this menu you can customize the images of the installed screensaver. Delete the<br />

pre-loaded images and add your own, personalized pictures within a few moments.<br />

Intercom (access restricted to installer):<br />

This menu permits to change complex parameters regarding the management of intercom<br />

systems. Normally these parameters do not need to be changed, since they already are<br />

pre-configured in the correct way. This menu is available only for KNXSUPERIO PLUS.<br />

Multimedia uploads (free access):<br />

Through this menu you can upload audio and video files to the internal storage of<br />

KNXSUPERIO PLUS; in the connection, this files can be reproduced using the integrated<br />

multimedia player. This menu is available only for KNXSUPERIO PLUS.<br />

6. The additional functions (plug-ins):<br />

Right beneath the Home button you will find the menu bar of the additional functions<br />

of KNXSUPERIO (PLUS). This so called plug-ins offer a great advantage: they are<br />

already preconfigured and can be integrated into your visualization with minimum<br />

effort. At the end of the OPTIMA wizard you can select and configure the desired<br />

plug-ins and add them to the visualization. The menu bar will only show the plug-ins<br />

which were actually added to your visualization.<br />

Even the configuration of the plug-ins is self-explanatory and is documented within<br />

the wizard. The following pages should just reveal the possibilities the plug-ins can<br />

offer by using them:<br />

Page 8/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

RSS reader:<br />

This plug-in is able to show you RSS news<br />

from all round the world. Up to 10 RSS feeds<br />

can be displayed within this page. Only feeds<br />

in the xml format are supported.<br />

Requires active internet connection for<br />

correct work!<br />

Family board:<br />

The Family board can be used to enter text<br />

messages directly over the touch screen. No<br />

matter if short info, messages or the shopping<br />

list: your mates thanks to this plug-in are<br />

always up to date.<br />

Intercom (only PLUS):<br />

The VoIP plug-in of KNXSUPERIO PLUS<br />

permits to perfectly integrate the intercom<br />

stations of the DIVUS OPENDOOR<br />

series. An incoming call automatically<br />

activates the plug-in: you are able to see the<br />

video stream of the door camera and can<br />

accept the call or just open the door. The<br />

configuration of this plug-in can be done<br />

within the OPTIMA wizard, the standard<br />

license permits to create a maximum of 3<br />

external units.<br />

Page 9/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

Web browser:<br />

You need to access internet No problem,<br />

the browser plug-in of KNXSUPERIO (PLUS)<br />

enables you to freely surf in the world wide<br />

web. You can even mark your preferred<br />

pages and add them to your personal<br />

favorites, in order to have a quick access.<br />

Note: in order to be able to input texts in the<br />

visualized web pages you will need an<br />

external keyboard!<br />

Requires active internet connection for<br />

correct work!<br />

Timer:<br />

No matter if quick weekly scheduling or longranged<br />

calendar timers: this plug-in offers<br />

you an intuitive interface which allows you<br />

to manage and schedule your functions with<br />

great comfort. The timer window can be<br />

accessed by making a LongClick gesture on<br />

the desired function.<br />

Scenarios + logics:<br />

These plug-ins give you an overview of the<br />

scenarios and logic functions which were<br />

created during the OPTIMA wizard.<br />

Naturally you can modify every created<br />

function and adjust them to your special<br />

needs. Meanwhile scenarios can be launched<br />

through this page, the logics work<br />

completely autonomically and just show<br />

their current state.<br />

Page 10/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

KNX weather station:<br />

Integrate the values of your KNX weather<br />

station into KNXSUPERIO (PLUS). This<br />

plug-in can be connected to the<br />

corresponding group addresses through the<br />

wizard and guarantees, that you will have<br />

this information always ready in a quick<br />

and clear way.<br />

Weather forecast:<br />

Thanks to the free online weather forecast<br />

service of yowindow.com, this plug-in shows<br />

you all information about the past / current<br />

/ future weather trend. Besides many<br />

additional weather facts like wind, air<br />

pressure etc. also the nice graphical<br />

interface makes sure that this plug-in will be<br />

a great „eye-catcher“.<br />

Multimedia player (only PLUS):<br />

The player plug-in permits to reproduce<br />

audio and video files. The files must be<br />

loaded to the internal storage of<br />

KNXSUPERIO PLUS through the<br />

administration menu, in the connection they<br />

can be searched through the „Browse“<br />

button of the player and be reproduced or<br />

added to the current playlist.<br />

Page 11/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

Graphical logging:<br />

Through this plug-in you can show up to 8<br />

log values in graphical form, being able to<br />

create 2 graphs with respectively 4 values.<br />

The right upper area shows a preview of the<br />

graph which also permits to zoom certain<br />

areas of the graph. You can change<br />

between the graphs by using a Swipe<br />

gesture in the lower right area. The<br />

configuration of the graphs can be done<br />

within the OPTIMA wizard.<br />

Video surveillance:<br />

You are using IP cameras Then this plug-in<br />

will be very convenient for you, since it<br />

permits to integrate up to 8 IP cameras into<br />

KNXSUPERIO (PLUS). A click on one of the<br />

preview images shows the desired video<br />

stream in full screen mode.<br />

Mail management:<br />

This plug-in permits to manage your<br />

personal mail account directly on<br />

KNXSUPERIO (PLUS). Just use the wizard in<br />

order to set the parameters regarding to<br />

your account, in order to be able to use this<br />

functionality. The plug-in supports only<br />

POP3/IMAP – SMTP accounts. Please note<br />

that some accounts use special encryptions<br />

and can therefore not be used in<br />

combination with this plug-in.<br />

Requires active internet connection for<br />

correct work!<br />

Page 12/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

7. FAQ:<br />

Q: KNXSUPERIO (PLUS) is a so called standalone device. What does this mean<br />

A: The expression standalone device means that KNXSUPERIO (PLUS) contains everything in order to be able to<br />

create and use a KNX visualization. All necessary software and hardware interfaces make part of the product,<br />

no additional components are required.<br />

On the other side this also means that KNXSUPERIO (PLUS) is a „finalized“ system: the visualization can only be<br />

shown on the device itself, furthermore it is not possible to install additional software.<br />

Q: If so, why do I need to configure the network<br />

A: KNXSUPERIO (PLUS) can be configured only remotely. Locally on the device only a few parameters can be<br />

changed. The configuration of the device by using the OPTIMA wizard therefore has to be done by accessing<br />

the interface remotely, which means that you need to set the correct networking parameters..<br />

Furthermore, some of the plug-ins of the OPTIMA interface require an internet connection in order to work<br />

correctly. If you want to use those plug-ins or if you want to activate the remote access to the administration<br />

menu, you have to align the network settings with the one of your network. KNXSUPERIO (PLUS) is delivered<br />

with the default IP address 192.168.0.110.<br />

If you do not want to connect KNXSUPERIO to your network, you can also ignore the network settings and use<br />

a cross-over cable in order to connect to KNXSUPERIO (PLUS). In this case all online services will be disabled.<br />

Q: I have started KNXSUPERIO (PLUS) for the first time, what to do now<br />

A: At the first startup you will only see the empty Home screen of the OPTIMA interface on the device. In order<br />

to configure your project, you have to connect remotely to KNXSUPERIO (PLUS). Please start Google Chrome on<br />

your PC and access KNXSUPERIO (PLUS) by typing in the following URL:<br />

https:// (default: https://192.168.0.110)<br />

If you get a certificate warning, please confirm the certificate in order to connect to the interface!<br />

In order to login, please use the following user-password combination:<br />

Username<br />

Administrator<br />

Password<br />

admin<br />

Afterwards you can access the OPTIMA wizard through the administration menu. Just follow the instructions of<br />

the wizard, which will accompany you through the whole creation of your visualization.<br />

Q: What is „ETStoKNXCONTROL“ and where do I find it<br />

A: The wizard mentions the application „ETStoKNXCONTROL“. This is required in order to convert your ETS<br />

database into a compatible format before starting the import. Therefore it has to be installed on the PC that<br />

contains your ETS database. You can find „ETStoKNXCONTROL“ on the product CD which is included in the<br />

delivery of KNXSUPERIO (PLUS).<br />

Q: I’m stuck at a certain point, what should I do<br />

A: KNXSUPERIO (PLUS) offers a clear Information and help system: every page contains information about the<br />

available functions / options, please read them carefully.<br />

However, if it should happen that you are stuck or feel insecure with certain parameters, please contact our<br />

technical support<br />

Page 13/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

8. NOTES:<br />

Page 14/16


www.divus.eu<br />

KNXSUPERIO - <strong>Quick</strong> start guide<br />

<strong>RC3</strong><br />

Page 15/16


marvelously simple & functional

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!