Public Safety Antenna Solutions - Mobile Mark

mobilemark.com

Public Safety Antenna Solutions - Mobile Mark

Public Safety

Antenna Solutions

Product Catalog

6-13


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Omni-Directional

Public Safety 4.9 GHz Systems

• Models from 6 dBi to 12 dBi

• Economical, weatherproof and durable

design for both indoors and outdoors

• Standard mounting kit includes all

hardware

ECO Series with

N Jack (Female)

Recessed N

Plug (Male)

Mobile Mark’s ECO Omni antennas are designed for all data &

broadband systems, including Public Safety 4.9 GHz. Using PCB

technology, these antennas improve high-speed broadband system

performance in an economical package.

The ECO Series are free space antennas; no ground plane is required.

Standard hardware includes pole/wall mount.

The antenna element is enclosed in a tough white or black fiberglass

radome. The antenna terminates with an integrated N-female.

A “PT” pigtail cable option also provides a direct coax into the

antenna and can be outfitted with a variety of connectors, such as

Reverse Polarity TNC or SMA. For direct male N mounting, series

“RN” can be chosen.

These antennas can withstand the harshest outdoor environments,

yet are quite attractive for indoor use. The antennas are supplied with

hardware for pole or surface mount.

Custom cable assemblies are available from Mobile Mark.

• Pigtail cable option; use standard mount

or hole mount with the 3/4-20 threaded

stud

Model # Gain Frequency

ECO6-4900-WHT 6 dBi Omni 4.9 - 5.0 GHz

ECO6-4900PT-3X-WHT-12 6 dBi Omni 4.9 - 5.0 GHz

ECO6-4900RN-WHT 6 dBi Omni 4.9 - 5.0 GHz

ECO9-4900-WHT 9 dBi Omni 4.9 - 5.0 GHz

ECO9-4900PT-3X-WHT-12 9 dBi Omni 4.9 - 5.0 GHz

ECO9-4900RN-WHT 9 dBi Omni 4.9 - 5.0 GHz

ECO12-4900-WHT 12 dBi Omni 4.9 - 5.0 GHz

ECO12-4900PT-3X-WHT-12 12 dBi Omni 4.9 - 5.0 GHz

ECO12-4900RN-WHT 12 dBi Omni 4.9 - 5.0 GHz

Cable/Connector Options:

Standard N Jack (Female)

add “PT” Pigtail Cable Option with N Plug (Male)

add “RN” Direct mount version with N Plug (Male)

Color options available for above models

WHT-White or BLK-Black

Specifications

Frequency/Gain:

VSWR:

Impedance:

Max Power:

ECO6 Beamwidth:

ECO9 Beamwidth

ECO12 Beamwidth:

Operating Temp:

Lightning Protection:

Max Wind Velocity:

Material:

Weight:

Antenna Diameter:

Mounting:

4.9-5.0 GHz

2:1 max over range

50 Ohm nominal

25 Watts

25 o El, 360 o Az

12 o El, 360 o Az

7 o El, 360 o Az

-40 o to +85 o C

External recommended

125+ mph (200 kph)

White or black fiberglass


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

ECOS

Spring Mount

Mobile

CA Series

Cable Assemblies

Trunk Lid

Mount

Mobile Mark offers a variety of spring mounted ECO Mobile antennas

for high frequency antennas at 2.4 - 6 GHz bands. The models for

Public Safety 4.9 GHz are available at 6 dBi or 9 dBi gain.

The spring maintains vertical position at all speeds, but will deflect if

hit by an obstruction. High gain coupled with low loss cable compensates

for the losses that occur at higher bands. These models

terminate on the bottom with an SMA Female connector. The cable

assembly is ordered separately with the appropriate radio connector.

The ECO Spring mount antennas allow easy insertion to a vehicle

or bulkhead. A 1 inch hole (25.4mm) is required for mounting. The

base of the antenna has a locking collar, the internal portion is tilt-in.

This internal portion has teeth that secures the inside as the external

locking collar is tightened down. The collar is outfitted with an O-ring,

and has flats for securing with a wrench.

The cable assembly can typically be inserted from the top side, easing

installation. Custom lengths can be ordered, 15 ft and 20 ft are

the most common lengths. Antennas use low loss RF-195 cable to

improve efficiency.

The vertical radomes are black or white fiberglass with a brass

chrome plated base assembly. The 3/4” diameter spring is made

from stainless steel. All antennas are weather proof. These antennas

are ground plane independent.

Surface Mount, Spring Mount

Public Safety 4.9 GHz

• Integral spring provides strength at

speed, provides flex for overhead obstructions

• Ground plane independent designs can

be used on any surface.

• Available in models with 6 dBi or 9 dBi

gain

• Seperate cable assemblies allow choice

of cable length and connector type.

Models

Spring Mount Omni Models

Model Gain Height

ECOS6-4900-BLK 6 dBi 12.5 in/32 cm

ECOS9-4900-BLK 9 dBi 16.3 in/42 cm

Add “-TM” for Vehicle Trunk Lid Mount Option

Color options available for above models

WHT-White or BLK-Black

Mating Cable Assemblies

Model Length End Connector

CA180/195-CS 15 ft (4.6 m) SMA Plug (Male)

CA240/195-CS 20 ft (6.1m) SMA Plug (Male)

CA180/195-XS 15 ft (4.6 m) N Plug (Male)

CA240/195-XS 20 ft (6.1m) N Plug (Male)

CA180/195-JS 15 ft (4.6 m) Rev Pol SMA Pug

CA240/195-JS 20 ft (6.1m) Rev Pol SMA Plug

Cable assemblies are pre-terminated with right angle SMA for

connection to the antenna. Cables are low loss Belden RF-195 or

equivalent.

Specifications

Frequency:

Gain:

VSWR

Impedance:

Maximum Power:

Operating Temp:

Radome:

Base/Mount:

Mounting Depth:

Base Dimension:

4.8-5.0 GHz

6 or 9 dBi

2:1 over band

50 Ohm nominal

10 Watts

-40 o to +85 o C

Black or white Fiberglass

Brass chrome plated

1/4” thick surface (6.4 mm)

1.5” Diameter (38 mm)

Spring:

Termination:

Weight:

Mounting:

Cable Assemblies:

Heavy duty Stainless Steel,

3/4” diameter (19 mm)

SMA Jack

Under 1 lb (0.45 Kg) all models,

not including cable assembly

Top mount assembly, “tilt-in”

with internal teeth & locking ring

Belden RF-195, with Right

angle SMA Plug to attach to

the antenna

41

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Directional, Corner Reflector

Public Safety, Military, & WiFi

• Rugged construction ideal for Heavyduty

applications

• Split balun feed provides superior bandwidth

& gain performance

• Small aperture; minimizes wind loading

Directional Corner

Reflector

• All hardware included for pole mounting

Mobile Mark’s SCR13 Series Corner Reflector antenna is useful for

point-to-point and point-to-multipoint applications in the 4.9 GHz

public safety band and Military 4.7 GHz band. The new dualband

WiFi corner reflector provides coverage for WiFi networks and short

range backhaul and can also be used for Public Safety at 4.9 GHz.

These corner reflectors use a half-wavelength element configuration.

A unique balun fed design provides high efficiency radiation without

skewing of the radiation pattern. The resultant performance provides

excellent bandwidth, gain and match over the frequency range.

These compact site antennas with a front aperture at only 3” x 5.5”

are easy to install. The connector mechanism exits at the rear of the

antenna, allowing easy installation.

Model # Gain Frequency

SCR13-4900-WHT 13 dBi 4.6 - 5.0 GHz

SCR-2400/5500-WHT 9 dBi Dualband 2.4-2.5 GHz

12 dBi & 4.9-6.0 GHz

Color options available for above model

WHT-White or BLK-Black

Cable jumper assemblies sold separately.

The mounting bracket (supplied) allows both horizontal and vertical

mounting of the antenna.

Specifications

Frequency:

Gain:

VSWR:

Impedance:

Weight:

Maximum Power:

SCR13-4900

SCR-2400/5500

Beamwidth:

SCR13-4900

SCR-2400/5500@2.4

@5.5

Front-to-Back ratio:

SCR13

SCR-2400/5500

Operating Temp:

See above

See above

2:1 max over range

50 Ohm nominal

1 lbs (0.45 kg)

25 Watts

10 Watts

54 o El, 31 o Az

45 o El, 35 o Az

35 o El, 25 o Az

22 dB or better

30 dB or better

-40 o to +85 o C

Lightning Protection:

SCR13-4900

SCR-2400/5500

Aperture:

Panel Size:

DC grounded, external

protection recommended

NA, external recommended

3” x 5.5” (76 mm x 140 mm)

3” x 3” ea (76 mm x 76 mm)

Max Wind Velocity:

125+ mph, (200 kph)

Material:

Powder-coated aluminum,

ASA plastic radome

Mounting:

Pole mount, all hardware

included

Mounting Dimension: Mounts up to 2” (51 mm)

diameter mast

Connector:

N Jack (Female), attached

at rear of antenna

Jumper Cable:

Many options, please call

Shock & Vibration EN 300 019-2-4, IEC 60068

42

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Adjustable Pole

Mount Bracket

Directional Sector Panels

Public Safety 4.9 GHz

• Weatherproof for outdoor use; compact

and attractive for inbuilding

• High gain performance (14 dBi - 18 dBi)

PS Series Sector

Antenna

Adjustable Wall

Mount Bracket

• Available in 45 o , 60 o and 90 o sector

• Adjustable tilt pole mount; optional wall

mount adapter

Mobile Mark’s PS Series sectorized panel antennas are excellent

for deploying point to multipoint applications in the new 4.9 public

safety band. The panel antenna is a single band design that uses PCB

technology for high performance, lower cost and compact size.

Models are available in several sector sizes with different gain factors.

Model PS18-4900-45 provides 18 dBi gain with a 45 degree sector.

Model PS16-4900-60 provides 16 dBi gain, and a corresponding 60

degree sector. Model PS14-4900-90 provides 14 dBi gain, and a corresponding

90 degree sector.

Multiple antenas can be used to provide increased capacity, target

coverage area or omni coverage. Front to back ratio is maintained at

25 dB or better. This allows true sectorization, or to isolate services to

different government branches.

Because these antennas are compact, moderate pole mounting configurations

can be used for easy network deployment. An adjustable

tilt pole mounting bracket allows simple alignment. The mount allows

for a continuous adjustable tilt slot. The mount is packed separately.

Pole mounted, the antenna can be adjusted up to 45 o downtilt. An

optional wall mount adapter is also available. The antenna is housed

in a very attractive light grey polystirene plastic. Compact in size,

12.5” H x 3” W (32 cm x 7.6 cm) this antenna will be unobtrusive in

any indoor or outdoor environment. These antennas are weather

resistant and can withstand the harshest conditions.

The antenna terminates with an integral Female N connector. Mobile

Mark can provide cable assemblies (jumpers) in a variety of cable

types.

External lightning protection to protect the radio, is recommended,

for outdoor antenna use.

Model # Gain Sector Size

PS14-4900-90 14 dBi 90 degree sector

PS16-4900-60 16 dBi 60 degree sector

PS18-4900-45 18 dBi 45 degree sector

PN-MK

PN-WMK

Panel pipe mounting kit

Panel wall mounting kit

Jumper cables are also available, built to order.

Specifications

Frequency:

4.94 - 4.99 GHz

Gain:

See model table

VSWR Max: 2:1

Impedance:

50 Ohm nominal

Max Power:

25 watts

Beamwidth:

PS14-4900-90

90 o Az, 10 o El

PS16-4900-60

60 o Az, 10 o El

PS18-4900-45

45 o Az, 10 o El

Front to Back Ratio:

25 dB or better

Lightning Protection:

External recommended

Max Wind Velocity:

125+ mph (200 kph)

Operating Temp:

-40 o to +85 o C

Material:

Dimensions:

Weight:

Mounting:

Tilt Adjustment:

Bracket:

Connector:

Water Ingress:

Light grey polystyrene radome

12.5” H x 3” W (all models)

32 cm x 7.6 cm

1 lbs (0.45 kg)

Adjustable pole mount, and

Stainless steel U Bolts

Continuous with optional

wall mount

45 degree vertical adjustment

3 7/8” standoff (9.88 cm)

N Jack (Female)

IPx5

43

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Directional Yagi Antennas

WiFi, Public Safety, Military & DSRC

• Slim attractive profile, 7.5” total length

including mounting bracket

Directional Yagi with

Standard wall mounting

• High gain for efficient point to point

• Easy installation; wall or pole-mount

Optional Swivel Pipe Mounting

• Mounting bracket allows 45 o vertical and

horizontal adjustment

This high quality and reliable Yagi Antenna can be used for any of

the wireless applications that fall in the 4.4-6.0 GHz frequency range.

These include WiFi 5 GHz, DSRC 5.9 GHz, Public Safety 4.9 GHz or

Military 4.4 GHz.

The YAG12 Series offers 10 dBi gain from 4.4-5.4 GHz and 12 dBi gain

from 5.47-6.0 GHz. This makes the antenna very effective for applications

such as mesh systems, point-to-point or point-to-multi-point.

ISP and Service Providers will find these antennas particularly efficient

for short range backhaul applications or for providing coverage

in hard to cover areas such as in an in-building corridor.

The antenna’s compact profile and subdued grey color helps this

Yagi fit in anywhere. The antenna measures only 6.35” long x 2.75”

high x .56” wide (16 cm x 7 cm x 1.3 cm). The slim profile makes this

antenna aesthetically pleasing for indoor use.

The radome is made from ASA, which resists discoloration by UV rays

even if the product is exposed to many years of sunlight.

The mounting options for this antenna make it very versatile; from

wall mounting to optional pipe mounting, installation of this antenna

is a breeze.

The unique adjustable mount has a 45 o adjustable range both in the

vertical range and the horizontal range.

Cable assemblies are available including RF-195, RG-58, LMR-240 and

LMR-400. Choices of connectors include SMA, TNC, and N connectors.

Model # Gain Connector

YAG12-5500-3C-GRY-12 10 & 12 dBi SMA Plug

YAG12-5500-3X-GRY-12 10 & 12 dBi N Plug

YAG-PMK

Optional pipe mount

For cable jumpers & other connectors, please contact your sales

representative

Specifications

Frequency & Gain:

VSWR:

Impedance:

Maximum Power:

Beamwidth:

Front-to-Back ratio:

Operating Temp:

Lightning Protection:

Antenna Radome:

Weight:

Mounting:

Standard

Optional

4.4-5.4 GHz, 10 dBi

5.47-6.0 GHz, 12 dBi

2:1 max over range

50 Ohm nominal

25 Watts

30 o elevation, 55 o azimuth

Better than 15 dB

-40 o C to +85 o C

External recommended

Grey ASA

.5 lbs (0.23 kg)

45 o adjustable Swivel Wall Mnt.

45 o adjustable Swivel Pipe Mnt.

Adjustment:

Radome Size:

Both vertical and horizontal

adjustment up to 45 o

2.75” H x 6.35” L x 0.56” W

(7 cm x 16 cm x 1.4 cm)

Size with mount: 2.75” x 7.5” x .56”

(7 cm x 19 cm x 1.4 cm)

Cable:

1 ft (30.5 cm) RF-195

Termination:

SMA Plug or N Plug, others

available

Shock & Vibration EN 300 019-2-4, IEC 60068

Water Ingress:

IPx5

44

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Directional Yagi Antennas

Dual Band WiFi & Public Safety

• Slim attractive profile, 7.5” total length

including mounting bracket

Directional Yagi with

Standard wall mounting

• High gain 8 dBi for efficient point to point

• Pole or Wall-mount makes installation

quick and easy

Optional Swivel Pipe Mounting

• Mounting bracket allows 45 o vertical and

horizontal adjustment

This high quality and reliable Yagi Antenna is designed for WiFi hotspots

and mesh networks operating on dual-band 2.4 & 5 GHz.

The YAG8 Series antenna offers 8 dBi gain and provides directional

coverage for point-to-point and point-to-multipoint applications.

The antenna is compact and aesthetically pleasing. It measures only

7 ½ inches (191 mm) from the mounting base to the tip of the antenna.

Its slim profile is even more impressive, measuring only 0.56

inches (14 mm) from side to side.

The radome is made from a light grey ASA material which blends in

well with most settings. The ASA material is UV protected and resists

discoloration, even when exposed to many years of sunlight.

The YAG8 Series antennas were designed with outdoor applications

in mind and will stand up to harsh weather conditions, but they are

attractive enough to blending into in-building settings.

ISP and Service Providers will find these antennas useful for extending

a network or providing efficient coverage in hard to cover areas

such as in a building corridor.

The mounting options for this antenna make it very versatile; from

pipe mounting to wall mounting, installation of this antenna is a

breeze.

The unique adjustable mount has a 45 o adjustable range in both the

vertical range and the horizontal direction.

Model # Gain Connector

YAG8-W-3C-GRY-12 8 dBi SMA Plug

YAG8-W-3X-GRY-12 8 dBi N Plug

YAG-PMK

Optional pipe mount

For cable jumpers & other connectors, please contact your sales

representative

Specifications

Frequency:

Gain:

VSWR:

Impedance:

Maximum Power:

Beamwidth:

Front-to-Back ratio:

Operating Temp:

Lightning Protection:

Antenna Radome:

Mounting:

Standard

Optional

2400-2485 MHz

& 4.9-6.0 GHz

8 dBi

2:1 max over range

50 Ohm nominal

25 Watts

70 o elevation, 90 o azimuth

Better than 15 dB

-40 o C to +85 o C

External recommended

Grey ASA

45 o adjustable Swivel Wall Mnt.

45 o adjustable Swivel Pipe Mnt.

Adjustment:

Radome Size:

Both vertical and horizontal

adjustment up to 45 o

2.75” H x 6.35” L x 0.56” W

(7 cm x 16 cm x 1.4 cm)

Size with mount: 2.75” x 7.5” x .56”

(7cm x 19cm x 1.4cm)

Weight:

.5 lbs (0.23 kg)

Cable:

1 ft (30.5 cm) RF-195

Termination:

SMA Plug or N Plug, others

available

Shock & Vibration EN 300 019-2-4, IEC 60068

Water Ingress:

IPx5

45

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Covert License Plate Frame

UHF, Cellular & GPS

Antenna elements hidden inside the

frame of the license plate

• 3 cables; each band has a separate

cable

License Plate Frame Antenna

• UHF element is field tunable

• Patented antenna design

Mobile Mark’s patented CLP Series Covert License Plate Frame

Antenna accommodates multiple antennas in one package. The

antenna elements are placed inside the frame of the license plate and

are not visible from the outside.

The CLP-UHF License Plate Frame Antenna can accommodate up to

three different applications. The 3-cable model covers GPS (1575

MHz), US Cellular (850 & 1900 MHz) as well as UHF (420-500 MHz).

The UHF element is field tunable to cover 20 MHz. Gain figures for

this antenna are Cellular: 2.5 dBi gain, UHF: 2.5 dBi gain, and GPS: 5

dBi nominal gain (26 dB Amplifier).

The License Plate Frame Antenna can also be configured with only

one or two cables, for example to cover UHF & Cellular but not GPS,

or to cover only the UHF band. Specify “00” in place of the cable/

connector indication in the model number.

The CLP Series Covert License Plate Frame Antenna can be mounted

on either the front or rear of a vehicle.

The antenna is designed for easy installation; each band has a

separate cable feed and RF connector. The cable length provided is

Specifications

Frequency:

Cable 1

Cable 2

Cable 3

Gain:

Cellular & UHF

GPS:

Amplifier Gain

Antenna Gain

Noise Figure

Amplifier Bias

Amplifier Current

VSWR:

Impedance:

420-500 MHz

20 MHz field tuned bandwidth

824-925 & 1850-1990 MHz

1575.42 +/- 2 MHz

2.5 dBi (peak)

26dB, LNA

5 dBi nominal RHCP

2.0 dB max, 1.7 dB typical

2.7 to 5 VDC

20 mA max, 10 mA typical

2:1 max over range

50 Ohms Nominal

typically 2 feet (61 cm). Jumper cables can be ordered to acommodate

various installations.

Connector 1

Connector 2

Connector 3

Power:

UHF

Cellular

Cables:

Cellular & GPS

UHF

Case:

Case Material:

Mounting:

Connectors:

Operating Temp:

Shock & Vibration:

Water Ingress:

Model Configurator

CLP-UHF-1 2 2 -BLK-24

Example: CLP-UHF-1C2C2C

Cable Options:

Connector Options:

Code Cable Code Connector

1 RG-58 A TNC

2 RG-174 B Mini UHF

C SMA

D SMB

“00” to denote “No Cellular” and/or “No GPS”

50 Watts Max

10 Watts Max

(Other Configurations available.)

RG-174, 2 ft (610 mm)

RG-58, 2 ft (610 mm)

12.4”D x 6.4”H

(315mm x 162mm)

UV resistant ASA, Color: Black

Std. license plate frame mount

ing (4 grommet openings)

SMA/SMA standard

-40 to +85° C

IEEE 1478 EN 61373, MIL-810G

TIA 329.2-C

IPx7

46

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Surface Mount Antennas

UHF & GPS

• Three UHF models available: 400, 425 or

450 MHz bands

Mirror Mount

• Thru-hole mount design insures a strong

secure installation

• IPx5 water ingress rating; no need to

remove for car washes

SMF-Dual Band

Flexible Whip

Trunk Lid Mount

These dual band configurations combine a UHF antenna along with

a GPS satellite antenna into one convenient package. This saves on

space, looks and installation time without sacrificing performance.

These antennas can be mounted to a vehicle’s metal surface or any

bulkhead through a 3/4” hole (19 mm). The antennas provide completely

independent dual band operation.

GPS performance is 26 dB LNA, with 5 dBi nominal antenna gain.

The GPS circuitry has a low noise figure (2.0 dB max) with excellent

filter characteristics. No interaction occurs between the bands.

These models have passed the IPx5 water ingress rating. This rating

along with a flexible whip allows these antennas to go through car

washes without the need to remove either the whip or the base of the

antenna from the vehicle.

The DC power required for the GPS amplifier (2.7-5 VDC) and signal

is applied through the same cabling directly to the GPS circuit.

Specifications

Frequency:

400 MHz UHF 380-430 MHz, factory set

425 MHz UHF 400-450 MHz, factory set

450 MHz UHF 430-512 MHz, factory set

GPS, all Models

1575.42 +/- 2 MHz

Gain:

Unity

VSWR:

2:1 max over range

GPS Gain:

26 dB LNA

5 dBi nominal RHCP Antenna

Noise Figure:

2.0 dB max, 1.7 dB typical

Nominal Impedance: 50 ohms

Maximum Power:

30 Watts on UHF

Amplifier Bias:

Current:

Operating Temp:

Case Material:

2.7 to 5 VDC

20 mA max, 10 mA typical

-40 o to +85 o C

Polycarbonate, black

• High performance GPS operates with 26

dB active GPS gain

The GPS cable is 15 feet of RG-174 cable (4.5 meters) and the connector

is an SMA Plug (Male). The UHF bands are outfitted with 15 feet

of RG-58 (4.5 meters) and SMA Plug (Male) connector.

Other connectors and configurations are available upon request.

Trunk Lid and Mirror Mount kit are provided for additional mounting

options.

Model #

SMF-400/1575-1C-BLK-180

SMF-425/1575-1C-BLK-180

SMF-450/1575-1C-BLK-180

Add “-TM” for Vehicle Trunk Lid Mount

Available in Black Only

SM-MM

Description

UHF & GPS Antenna

UHF & GPS Antenna

UHF & GPS Antenna

Mirror Mount option

Dimensions:

400 MHz UHF 6 1/4” height (158.7 mm)

425 MHz UHF 6” height (152.4 mm)

450 MHz UHF 5 3/4” height (146.0 mm)

Base Dimension:

Stud Mounting:

GPS Cable:

UHF Cable:

Cable Attachment:

Connector:

Shock & Vibration:

Water Ingress:

1” H x 2 5/8” D

(25mm x 67 mm)

3/4” dia x1/2” long

(19mm x13mm) for

3/16” thick (4.7 mm) surface

RG-174, 15 feet (4.5 meters)

RG-58, 15 feet (4.5 meters)

Integral to device, bottom exit

SMA Plug (Male) standard

EN 61373, IEEE 1478, MIL-810G

TIA-329.2-C

IPx5

47

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Surface Mount Multiband

UHF, WiFi, Public Safety 4.9 & GPS

• Model SMW-310: 3 cable feed multiband

covers UHF, WiFi, Public Safety 4.9 & GPS

• 3 antennas in 1 radome; saves time

and money by reducing the number of

installations

• True omni-directional pattern; provides

exceptional performance

3-Cable Multiband

Antenna

The SMW-310 Series Antenna has three separate RF cable feeds and

will most typically be used for UHF, WiFi & GPS. Bandwidth coverage

is 450-470 MHz on the first cable, 2400-2485 MHz & 4.9-6.0 GHz on

the second cable and 1575 MHz for GPS on the third cable.

The ideal application for this product is public safety vehicles, such

as police cars. This combination of frequencies is standard on most

police cars in-service today. The SMW Series is a lower cost solution

because it reduces the number of installations , reduces the downtime

for those installations, and one radome significantly reduces the

overall footprint.

The antennas can be mounted to any vehicle, cargo container or

trailer. The stud mount design uses a ¾” feed thru (19mm) for

securing to the vehicle. For best performance, the antenna should be

mounted on a metal surface or ground plane.

For the GPS interface, the antennas are typically outfitted with 15 feet

of RG-174 cable (4.5 meters). The UHF interface cable is 15 feet of RG-

58 and the WiFi interface has 15 feet of low loss RF-195. All connectors

are male unless requested otherwise.

The antennas are enclosed in a 4.2”D x 3.2”H weather-proof radome

(107 mm x 81 mm), The SMW series of antennas are fully weather

resistant with a Dust and Water Ingress rating of IP67. The radome

Specifications

Frequency & Gain:

Cable 1

Cable 2

Cable 3 (GPS)

VSWR:

Nominal Impedance:

Power:

UHF

WiFi

GPS:

Noise Figure

Amplifier Bias

Amplifier Current

Case:

450-470 MHz, 2 dBi

2.4 & 4.9-6.0 GHz, 5 dBi

1575.42 +/- 2 MHz, LNA 26dB

5 dBi nominal RHCP, Antenna

2:1 max over range

50 ohms

30 Watts

10 Watts

2.0 dB max, 1.7 dB typical

2.7 to 5 VDC

20 mA, 10 mA typical

4.2”D x 3.2”H (107 mm x 81 mm)

add ½” (1.3 cm) for mag base

color is white or black UV resistant ASA.

Case Material:

Cable:

Cable 1

Cable 2

Cable 3 (GPS)

Connectors:

Mounting:

Operating Temp:

Shock & Vibration:

Dust/Water Ingress:

Model Configurator

SMW-310- - -

Cable/Connector 1

Cable/Connector 2

Cable/Connector 3

Color

Cable Length in Inches (eg. 12 or 180)

Example: SMW-310-3A3A2C-WHT-180

Specify “SMWG” or “MGWG” instead of “SMW” or “MGW”

for GPS/Glonass combination antenna.

Cable Options: Connector Options: Color Options:

Code Cable Code Connector Code Color

1 RG-58 A TNC WHT White

2 RG-174 B Mini UHF BLK Black

3 RF-195 C SMA

White or Black UV resistant ASA

RG-58 cable,15 ft (4.5 meters)

RF-195 cable,15 ft (4.5 meters)

RG-174, 15 ft (4.5 meters)

SMA Plug (Male)

(Other Configurations available.)

Threaded metal stud

¾” dia. x ½” long

(19 mm x 13 mm) for 1/4” (6 mm)

thick metal;

supplied with gasket and nut

-40 to +85 ° C

IEEE1478, EN 61373, MIL-810G

TIA 329.2-C

IP67

48

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Cable Assemblies &

Connectors

• Custom RF cable assemblies built to

order

• Variety of styles & connectors available

Custom Coax

Cable Assemblies

• Provides extension capability to

standard antennas configurations

• Quality low loss

Mobile Mark manufactures custom cable assemblies. All standard

cable assemblies/ connectors are 50 Ohm. Standard production lead

times are typically 2 weeks. Longer lead times may apply to some.

RG-174 (8216) is a very small (approx. 0.1”/2.5 mm) flexible

cable best suited for mobile/portable applications up to 1900 MHz. It

can be used in short runs up to 2.7 GHz. For miniature sized connectors

it has the widest options available.

LMR-100A is the low loss alternative for RG-174. It has the same

size diameter (0.1 inch or 2.5 mm) and can be used with the same

range of connectors. The cable is well shielded but is still flexible and

easy to handle.

RG-58 (8240) is the work horse cable and is suitable for applications

up to 2.7 GHz. It is best suited for cable runs under approximately

20ft (6 meters).

RF-195 (7806R) is the same size cable as RG-58, and uses the

same size connectors, with the added feature of lower cable losses.

RF-195 would be suitable for cable runs over 15 ft (4.5 meters) or in

high frequency applications up to 6 GHz. This is our standard cable

for applications above 2.5 GHz.

LMR-195FR is a non-halogen (non-toxic), low smoke, fire retardant

cable. It has the same diameter as RF-195, can be fitted with the same

variety of connectors, and has the same cable loss.

LMR-240 is a lower loss cable than RF-195 and best suited for

longer cable runs from 20 ft - 50 ft (6 meters - 15 meters) as well as

for higher frequency applications up to 6 GHz or more.

LMR-400 is suitable for long runs & higher frequency applications.

Approximately 0.405” diameter (10 mm), it might be too large for

some mobile installs, but is perfect for every base station transmitter

or access point. Longer lead times may apply.

LMR-600 is the lowest loss cable we offer. It is a premium low loss

cable. It is suitable for base station installations where the antenna

may be mounted on a tower with long runs of cable.

Cable Type Loss Per ft. at Loss Per ft. at Loss Per ft. at Loss Per ft. at

900 MHz 2000 MHz 2500 MHz 5000 MHz

RG-174 0.32 dB 0.49 dB 0.55 dB NR

LMR-100A 0.22 dB 0.30 dB 0.39 dB 0.50 dB

RG-58 0.14 dB 0.21 dB 0.24 dB 0.43 dB

RF-195 0.10 dB 0.15 dB 0.17 dB 0.25 dB

LMR-195FR 0.10 dB 0.15 dB 0.17 dB 0.25 dB

LMR-240 0.07 dB 0.10 dB 0.12 dB 0.17 dB

LMR-400 0.04 dB 0.06 dB 0.07 dB 0.12 dB

LMR-600


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Cable Stripper

Surge Arrestor

Hole Saw

(drill bit)

Ground Plane Kit

Installation & Protection

Options

• Installation hardware: Crimp tools,

adapters & cable weathersealing

• RF Coax Surge Protector products from

popular manufacturers

Crimp Tools

Connector Sealing

Tape

Mastic Sealing

Kits

• Proven name brand/OEM products

Connector

Adapters

Crimp Dies

• Easy, one-stop shopping for antennas &

accessories.

In addition to our world class line of antenna products, Mobile Mark

can supply a variety of accessories to ease installation and provide

protection features. We offer several OEM and name brand products.

Lightning/Surge Arrestors

We offer several name brand surge arrestor products. Surge arrestors

are important to protect your entire radio system. Surge arrestors

typically won’t save the antenna in a direct lightning strike, they are

intended to protect more expensive equipment down stream. The

Surge Arrestors are generally configured by operating frequency.

Special Vehicle Install Helpers

Many of the popular antennas require a 3/4” hole for mounting. To

easily make a hole, utilize a 3/4 hole saw on a drill bit to make a quick

and clean installation. Some antennas require a ground plane, as

listed in the spec sheets. We offer a ground plane disc for antennas

that are mounted to a plastic or fiberglass surface. The ground plane

disc is available in several hole sizes.

Crimp Tools & Cable Strippers

For attaching or replacing your own cable connectors, a ratchet crimp

tool is offered. The standard crimp tool accepts various hex dies. The

dies needed depend on the type/size of cable you are using. We offer

the dies for our most popular cable types. A quick spinning cable

stripper is an almost effortless way to properly prepare cable for

crimping a connector. They are designed to prep cable more precisely

than using a hand strip tool.

Cable/Connector Sealing

If you are using a product outdoors, it is always a good idea to use

one of the mastic kits designed to seal up connector/cable junctions.

Even if the connector is used in a seemingly protected environment,

condensation can cause moisture to buildup in connectors. Over

time, that moisture can move into cable and reduce the performance

significantly.

RF Connector Adapters

Sometimes a quick change is needed for an existing antenna or cable

to interface with a different connector. RF adapters provide a quick

way of changing the connecting style to exactly what you need. RF

adapters have negligible signal losses, so there is nothing better for a

quick solution. Also, data applications may require special adapters

6

to interface to an external antenna. We also offer a variety of jumper

cable adapters to suit your needs.

Model

Description

Lightning& Surge Arrestors

ACC-GT-NFF-AL

Gas Tube Surge Arrestor, 0-7 GHz, N Jack

(Female-Female)

ACC-TW-LP-005N Lightning Arrestor 0 - 6 GHz, N Bulkhead

(Female-Female)

ACC-AL-LSXM

Surge Protector 2 - 6 GHz, N Jack

(Female-Female)

Special Vehicle Install Help

ACC-HSK19

3/4” Hole saw/drill bit

ACC-K332

Ground plane disc, 6” D

Various Hole Sizes Available

Crimp Tools & Cable Strippers

ACC-RFA-4005-20 Crimper Hand set (no die)

ACC-RFA-4005-01 Crimper Die for RG-58/RF-195

ACC-RFA-4005-09 Crimper Die for RG-174/LMR-100

ACC-RFA-4005-14 Crimper Die for LMR-400

ACC-1258

Cable Stripper RG-174/LMR-100

ACC-HTA-312B

Cable Stripper for RG-58/RF-195

ACC-15035WS

Cable stripper for RG-8/LMR-400

Cable/Connector Sealing

ACC-2228

1 in x10 ft Fusion Sealing tape (roll)

ACC-RVS-11

Roll-on mid cable Seal (Rayvolve)

ACC-FT3430

Fusion Bond tape 3/4” x 30 ft roll

ACC-WK-U

Universal Weatherproofing Kit

Connector Adapters

770-000-0-010 TNC Jack to SMA Plug Adapter

770-000-0-012 TNC Jack to Rev Polarity TNC Plug

770-000-0-009 TNC Jack to N Plug Adapter

770-000-0-008 SMA Jack to N Plug Adapter 0-7 GHz

770-000-0-011 SMA Jack to N Plug Adapter 0-4 GHz

Some models may only be available from the USA.

Contact your sales representative for a full list of adapters.

Specifications subject to Change without notice (6/2013)


US Office: Tel: 800-648-2800 or +1.847-671-6690

UK Office: Tel: (+44) 1543 459555

www.mobilemark.com

Mounting Accessories &

Options

• Universal Wall Mounts available in

standoffs of 2.5 inches to 1 ft. (6 - 30 cm)

Universal Wall

Mount 2.5”

Standoff

Universal Wall

Mount 4”

Standoff

Universal Wall

Mount 12”

Standoff

• Truck mirror and trunk lid mounts

available for Stud mount antennas

• Wall/Pole mount adapts stud antennas

to fixed base station/access point

• L bracket simplifies mounting of OD

Series antennas to a wall

Truck Mirror

Mount for Stud

Antennas

Pole Mount for

Stud Antennas

Trunk Lid

Mount Stud

Antennas

Wall Mount

for OD Series

Antenna

Universal Base Station Wall Mounts

These universal wall mounts can be used with any model antenna

that provides pole mounting hardware. Each kit comes with 2 wall

mount brackets and a unifying 2” OD pole (51 mm). Standoffs are

available for 2.5”, 4” and 12” distances. The 12” stand off version

supplies an additional support leg for proper strength.

Pole Mount Adapter Kit

The model RM-MK wall and pole mount can be used to adapt a stud

mount antennas for used as a fixed access point. The kit can accommodate

antennas with stud diameter up to 3/4” and is supplied with

a 2.75” ground plate.

Universal Mount

The NT-MK L-bracket mount can be used for a number of different

models, including many of the site antennas.

Truck Mirror Mount

The Truck Mirror Mount (Model SM-MM) can be used to adapt most

of Mobile Mark’s Stud mount antennas for truck side mirror mounting.

The ground plate is 2 3/4” diameter (70 mm) aluminum and the

mounting hole can accommodate up to 3/4” stud (19 mm).

Trunk Lid Mount Adapter

The model SM-TM provides vehicle trunk (or hood) lid mounting for

our stud mount antennas. The SM-TM provide mounting U shaped

tangs (with set screws), that wrap around the trunk surface/weatherstrip.

The ground plate is 2 3/4” round (70 mm), and can accommodate

a stud size of up to 3/4” (19 mm).

Wall Mount - OD Series

The model OD-WMK is a simplified L shaped bracket to mount the

OD Series antennas to a wall. The aluminum bracket provides a 5”

standoff from the wall, and is supplied with U Bolts for accommodating

the 1” diameter (25 mm) of the OD body.

Replacement kits

Replacement kits are often requested to make it easier to move an

7

antenna from one installation to another. In particular, the re-install

tape kit for the MM3 glass mount antennas facilitates re-installation.

Note: Some mounting accessories & kits may only be availabe from

the USA.

Model #

Description

Universal Base Station Wall Mounts

ACC-8305

2.5” stand off (6 cm) wall mount with pole

ACC-102643

4” stand off (10 cm) wall mount with pole

ACC-103024

12” stand off (30 cm) wall mount with pole

Wall Mount

PN-WMK

NLM-WM

Adjustable wall mount for panels

Wall mount for NLM Series

Wall/Pole Mount Adapter

RM-MK

Wall & Pole adapter kit for stud mnt. antennas

BP-MK

Pole/Wall mount for BP Series

Universal Pole Mount/Wall Mount

NT-MK

L-bracket mount

Mobile Mount

SM-TM

SM-MM

Omni Series Mounts

OD-WMK

OD-MK

Pipe Mount

NLM-PM

YAG-PMK

Replacement Kit

MM-K

PN-MK

Vehicle Trunk lid mount with ground plate

Truck Mirror mount, with ground plate

L Bracket for wall mounting OD Series antennas

Standard Pole mount; Fits mast up to 2.5” OD

Pole mount for NLM Series

Pole mount for YAGI antennas

MM3 Re-install tape kit

Replacement mount for PS Series

Specifications subject to Change without notice (6/2013)

More magazines by this user
Similar magazines