Chemwatch Australian MSDS 31-8731 - FUJIFILM Australia

products.fujifilm.com.au

Chemwatch Australian MSDS 31-8731 - FUJIFILM Australia

FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 1 of 8

Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

FUJIFILM CN-16Q NQ3-RS 850185

PRODUCT CODE 391030

PRODUCT USE

■ Used according to manufacturer's directions.

SUPPLIER

Company: FUJIFILM Australia Pty Ltd

Address:

114 Old Pittwater Road

Brookvale

NSW, 2100

Australia

Telephone: +61 2 9466 2600

Emergency Tel: +61 1800 039 008

Emergency Tel: +61 3 9573 3112

Fax: +61 2 9938 1975

Section 2 - HAZARDS IDENTIFICATION

STATEMENT OF HAZARDOUS NATURE

HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.

CHEMWATCH HAZARD RATINGS

Flammability

Toxicity

Body Contact

Reactivity

Chronic

SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4

RISK

Risk Codes

R20

R33

R36/37/38

R68(3)

SAFETY

Safety Codes

S23

S24

S25

S36

S37

S39

Risk Phrases

• Harmful by inhalation.

• Danger of cumulative effects.

• Irritating to eyes, respiratory system and skin.

• Possible risk of irreversible effects.

Safety Phrases

• Do not breathe gas/fumes/vapour/spray.

• Avoid contact with skin.

• Avoid contact with eyes.

• Wear suitable protective clothing.

• Wear suitable gloves.

• Wear eye/face protection.

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 2 of 8

Section 2 - HAZARDS IDENTIFICATION

S51

S09

S40

S07

S13

S26

S46

• Use only in well ventilated areas.

• Keep container in a well ventilated place.

• To clean the floor and all objects contaminated by this material, use water.

• Keep container tightly closed.

• Keep away from food, drink and animal feeding stuffs.

• In case of contact with eyes, rinse with plenty of water and contact Doctor or

Poisons Information Centre.

• If swallowed, IMMEDIATELY contact Doctor or Poisons Information Centre. (show

this container or label).

Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS

NAME CAS RN %

diammonium thiosulfate 7783-18-8 30-50

sodium sulfite 7757-83-7 1-5

EDTA disodium salt 139-33-3 0.1-1

water 7732-18-5 40-60

Section 4 - FIRST AID MEASURES

SWALLOWED

• If swallowed do NOT induce vomiting.

• If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and

prevent aspiration.

• Observe the patient carefully.

• Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious.

EYE

■ If this product comes in contact with the eyes:

• Wash out immediately with fresh running water.

• Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting

the upper and lower lids.

• Seek medical attention without delay; if pain persists or recurs seek medical attention.

• Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.

SKIN

■ If skin or hair contact occurs:

• Flush skin and hair with running water (and soap if available).

• Seek medical attention in event of irritation.

INHALED

• If fumes or combustion products are inhaled remove from contaminated area.

• Lay patient down. Keep warm and rested.

• Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid

procedures.

• Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket

mask as trained. Perform CPR if necessary.

• Inhalation of vapours or aerosols (mists, fumes) may cause lung oedema.

• Corrosive substances may cause lung damage (e.g. lung oedema, fluid in the lungs).

• As this reaction may be delayed up to 24 hours after exposure, affected individuals need complete rest (preferably in semirecumbent

posture) and must be kept under medical observation even if no symptoms are (yet) manifested.

• Before any such manifestation, the administration of a spray containing a dexamethasone derivative or beclomethasone derivative

may be considered.

NOTES TO PHYSICIAN

■ Treat symptomatically.

Depending on the degree of exposure, periodic medical examination is indicated. The symptoms of lung oedema often do not manifest

until a few hours have passed and they are aggravated by physical effort.

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 3 of 8

Section 5 - FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA

• There is no restriction on the type of extinguisher which may be used.

• Use extinguishing media suitable for surrounding area.

FIRE FIGHTING

• Alert Fire Brigade and tell them location and nature of hazard.

• Wear breathing apparatus plus protective gloves in the event of a fire.

• Prevent, by any means available, spillage from entering drains or water courses.

• Use fire fighting procedures suitable for surrounding area.

FIRE/EXPLOSION HAZARD

• Non combustible.

• Not considered a significant fire risk, however containers may burn.

Decomposition may produce toxic fumes of: nitrogen oxides (NOx), sulfur oxides (SOx).

May emit poisonous fumes.

FIRE INCOMPATIBILITY

■ None known.

HAZCHEM

None

Section 6 - ACCIDENTAL RELEASE MEASURES

MINOR SPILLS

• Clean up all spills immediately.

• Avoid breathing vapours and contact with skin and eyes.

• Control personal contact with the substance, by using protective equipment.

• Contain and absorb spill with sand, earth, inert material or vermiculite.

MAJOR SPILLS

■ Moderate hazard.

• Clear area of personnel and move upwind.

• Alert Fire Brigade and tell them location and nature of hazard.

• Wear breathing apparatus plus protective gloves.

• Prevent, by any means available, spillage from entering drains or water course.

Personal Protective Equipment advice is contained in Section 8 of the MSDS.

Section 7 - HANDLING AND STORAGE

PROCEDURE FOR HANDLING

• DO NOT allow clothing wet with material to stay in contact with skin.

• Avoid all personal contact, including inhalation.

• Wear protective clothing when risk of exposure occurs.

• Use in a well-ventilated area.

• Prevent concentration in hollows and sumps.

SUITABLE CONTAINER

• Polyethylene or polypropylene container.

• Packing as recommended by manufacturer.

• Check all containers are clearly labelled and free from leaks.

STORAGE INCOMPATIBILITY

■ For inorganic thiosulfates

• Avoid storage with acids, metal nitrites, sodium nitrite, halogens and oxidizing agents.

• Forms explosive product with potassium nitrate, sodium nitrate

• Reacts with acids, forming sulfur dioxide

• Incompatible with halogens, lead, silver and mercury salts. iodine.

• Inorganic reducing agents react with oxidizing agents to generate heat and products that may be flammable, combustible, or

otherwise reactive. Their reactions with oxidizing agents may be violent.

• Incidents involving interaction of active oxidants and reducing agents, either by design or accident, are usually very

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 4 of 8

Section 7 - HANDLING AND STORAGE

energetic and examples of so-called redox reactions.

Sulfites and hydrosulfites (dithionites) :

• may react explosively with strong oxidising agents.

• react with water or steam to produce corrosive acid solutions and sulfur oxide fumes - aqueous solutions are incompatible with

oxidisers, strong acids, alkalis, ammonia, aliphatic amines, alkanolamines, alkylene oxides, amides, epichlorohydrin, organic

anhydrides, isocyanates, nitromethane, vinyl acetate

• aqueous solutions attack metals in presence of moisture

• generate gaseous sulfur dioxide in contact with oxidising and nonoxidising acids.

Sulfur dioxide:

• reacts with water or steam forming sulfurous acid; reaction may be violent

• reacts with acrolein, alcohols, aluminium powder, alkali metals, amines, bromine, pentafluoride, caustics, caesium, acetylene

carbide, chlorates, chlorine trifluoride, chromium powder, copper or its alloy powders, diethylzinc, fluorine, lead dioxide,

lithium acetylene carbide, metal powders, monolithium acetylide-ammonia, nitryl chloride, potassium acetylene carbide,

potassium acetylide, potassium chlorate, rubidium carbide, silver azide, sodium, sodium acetylide, stannous oxide; reaction may

be violent

• decomposes above 60 deg. C releasing oxides of sulfur

• Incompatible with alkalis, alkylene oxides, ammonia, aliphatic amines, alkanolamines, amides, organic anhydrides, caesium

monoxide, epichlorohydrin, ferrous oxide, halogens, interhalogens, isocyanates, lithium nitrate, manganese, metal acetylides,

metal oxides, perbromyl fluoride, red phosphorus, potassium azide, rubidium acetylide, sodium hydride, sulfuric acid.

STORAGE REQUIREMENTS

• Store in original containers.

• Keep containers securely sealed.

• Store in a cool, dry, well-ventilated area.

• Store away from incompatible materials and foodstuff containers.

Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE CONTROLS

The following materials had no OELs on our records

• diammonium thiosulfate: CAS:7783- 18- 8

• sodium sulfite: CAS:7757- 83- 7 CAS:10102- 15- 5

• EDTA disodium salt: CAS:139- 33- 3 CAS:69772- 70- 9

• water: CAS:7732- 18- 5

MATERIAL DATA

DIAMMONIUM THIOSULFATE:

EDTA DISODIUM SALT:

■ It is the goal of the ACGIH (and other Agencies) to recommend TLVs (or their equivalent) for all substances for which there

is evidence of health effects at airborne concentrations encountered in the workplace.

At this time no TLV has been established, even though this material may produce adverse health effects (as evidenced in animal

experiments or clinical experience).

NOTE: The ACGIH occupational exposure standard for Particles Not Otherwise Specified (P.N.O.S) does NOT apply.

FUJIFILM CN-16Q NQ3-RS:

SODIUM SULFITE:

■ Inorganic sulfites, bisulfites and metabisulfites (sodium, potassium and ammonium salts) liberate sulfur dioxide under

certain conditions. Therefore the officially tabled exposure limits for these chemicals normally correspond to the yield of

liberated sulfur dioxide.


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 5 of 8

Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

RESPIRATOR

•Particulate. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent)

EYE

• Safety glasses with side shields

• Chemical goggles.

• Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document,

describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a

review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and

first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of

chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at

the first signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washed

hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59], [AS/NZS 1336 or national equivalent].

HANDS/FEET

• Wear chemical protective gloves, eg. PVC.

• Wear safety footwear or safety gumboots, eg. Rubber.

Suitability and durability of glove type is dependent on usage. Important factors in the selection of gloves include:

• frequency and duration of contact,

• chemical resistance of glove material,

• glove thickness and

• dexterity.

OTHER

• Overalls.

• P.V.C. apron.

• Barrier cream.

• Skin cleansing cream.

ENGINEERING CONTROLS

■ Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed

engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to

provide this high level of protection.

The basic types of engineering controls are:

Process controls which involve changing the way a job activity or process is done to reduce the risk.

Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation

that strategically "adds" and "removes" air in the work environment.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE

Colourless liquid with a slight ammoniacal odour; mixes with water.

PHYSICAL PROPERTIES

Liquid.

Mixes with water.

State Liquid Molecular Weight Not Applicable

Melting Range (°C) Not Available Viscosity Not Available

Boiling Range (°C) Not Available Solubility in water (g/L) Miscible

Flash Point (°C) Not Applicable pH (1% solution) Not Available

Decomposition Temp (°C) Not Available pH (as supplied) 8.1

Autoignition Temp (°C) Not Applicable Vapour Pressure (kPa) Not Available

Upper Explosive Limit (%) Not Applicable Specific Gravity (water=1) 1.275

Lower Explosive Limit (%) Not Applicable Relative Vapour Density Not Available

(air=1)

Volatile Component (%vol) Not Available Evaporation Rate Not Available

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 6 of 8

Section 10 - STABILITY AND REACTIVITY

CONDITIONS CONTRIBUTING TO INSTABILITY

• Presence of incompatible materials.

• Product is considered stable.

• Hazardous polymerisation will not occur.

For incompatible materials - refer to Section 7 - Handling and Storage.

Section 11 - TOXICOLOGICAL INFORMATION

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

■ Accidental ingestion of the material may be damaging to the health of the individual.

Thiosulfate salts are poorly absorbed and stimulate the emptying of thebowel.

Large doses of ammonia or injected ammonium salts may produce diarrhoea and may be sufficiently absorbed to produce increased

production of urine and systemic poisoning. Symptoms include weakening of facial muscle, tremor, anxiety, reduced muscle and limb

control.

EYE

■ This material can cause eye irritation and damage in some persons.

SKIN

■ This material can cause inflammation of the skin oncontact in some persons.

Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects.

Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.

INHALED

■ Inhalation of vapours or aerosols (mists, fumes), generated by the material during the course of normal handling, may be

harmful.

The material can cause respiratory irritation in some persons. The body's response to such irritation can cause further lung

damage.

CHRONIC HEALTH EFFECTS

■ Substance accumulation, in the human body, is likely and may cause some concern following repeated or long-term occupational

exposure.

Strong evidence exists that this substance may cause irreversible mutations (though not lethal) even following a single exposure.

Laboratory (in vitro) and animal studies show, exposure to the material may result in a possible risk of irreversible effects,

with the possibility of producing mutation.

Sulfites and bisulfites can cause narrowing of the airways, stomach upset, flushing, low blood pressure, tingling sensation,

itchy wheal, swelling and shock, and asthmatics are especially prone. They induce allergic-like reactions which can occur on

first contact with the material.

TOXICITY AND IRRITATION

■ No significant acute toxicological data identified in literature search.

Contact allergies quickly manifest themselves as contact eczema, more rarely as urticaria or Quincke's oedema. The pathogenesis

of contact eczema involves a cell-mediated (T lymphocytes) immune reaction of the delayed type. Other allergic skin reactions,

e.g. contact urticaria, involve antibody-mediated immune reactions. The significance of the contact allergen is not simply

determined by its sensitisation potential: the distribution of the substance and the opportunities for contact with it are

equally important. A weakly sensitising substance which is widely distributed can be a more important allergen than one with

stronger sensitising potential with which few individuals come into contact. From a clinical point of view, substances are

noteworthy if they produce an allergic test reaction in more than 1% of the persons tested.

Asthma-like symptoms may continue for months or even years after exposure to the material ceases. This may be due to a nonallergenic

condition known as reactive airways dysfunction syndrome (RADS) which can occur following exposure to high levels of

highly irritating compound.

CARCINOGEN

Sulfites International Agency for Research on Cancer Group 3

(IARC) - Agents Reviewed by the IARC

Monographs

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 7 of 8

No data

Section 12 - ECOLOGICAL INFORMATION

Ecotoxicity

Ingredient Persistence: Persistence: Air Bioaccumulation Mobility

Water/Soil

diammonium thiosulfate No Data No Data LOW

Available

Available

sodium sulfite No Data No Data

Available

Available

EDTA disodium salt LOW No Data LOW MED

Available

Section 13 - DISPOSAL CONSIDERATIONS

• Containers may still present a chemical hazard/ danger when empty.

• Return to supplier for reuse/ recycling if possible.

Otherwise:

• If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to

store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.

• Where possible retain label warnings and MSDS and observe all notices pertaining to the product.

Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to laws

operating in their area.

A Hierarchy of Controls seems to be common - the user should investigate:

• Reduction.

• DO NOT allow wash water from cleaning or process equipment to enter drains.

• It may be necessary to collect all wash water for treatment before disposal.

• In all cases disposal to sewer may be subject to local laws and regulations and these should be considered first.

• Where in doubt contact the responsible authority.

• Recycle wherever possible.

• Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable

treatment or disposal facility can be identified.

• Dispose of by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or incineration in

a licenced apparatus (after admixture with suitable combustible material).

• Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.

Section 14 - TRANSPORTATION INFORMATION

HAZCHEM:

None (ADG7)

■ Air transport may be forbidden if this material is flammable, corrosive or toxic gases may be released under normal conditions

of transport.

NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS: ADG7, UN, IATA, IMDG

Section 15 - REGULATORY INFORMATION

POISONS SCHEDULE None

REGULATIONS

Fujifilm CN-16Q NQ3-Rs (CAS: ) is found on the following regulatory lists;

"International Agency for Research on Cancer (IARC) - Agents Reviewed by the IARC Monographs"

Regulations for ingredients

diammonium thiosulfate (CAS: 7783-18-8) is found on the following regulatory lists;

"Australia Hazardous Substances","Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory",

"OECD List of High Production Volume (HPV) Chemicals"

Witco BWT 2010 (CAS: 7757-83-7,10102-15-5) is found on the following regulatory lists;

"Australia - Victoria Drugs, Poisons and Controlled Substances (Precursor Chemicals) Regs 2007 - Schedule 1 - Precursor Chemicals

continued...


FUJIFILM CN-16Q NQ3-RS

Chemwatch Independent Material Safety Data Sheet

Issue Date: 7-May-2012 CHEMWATCH 31-8731

X9317SP(cs)

Version No:2.0

CD 2012/2 Page 8 of 8

Section 15 - REGULATORY INFORMATION

and Quantities","Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory","Australia Standard

for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Appendix F (Part 3)","International Agency for Research on Cancer

(IARC) - Agents Reviewed by the IARC Monographs","OECD List of High Production Volume (HPV) Chemicals"

EDTA disodium salt (CAS: 139-33-3,69772-70-9) is found on the following regulatory lists;

"Australia Inventory of Chemical Substances (AICS)","OECD List of High Production Volume (HPV) Chemicals"

water (CAS: 7732-18-5) is found on the following regulatory lists;

"Australia Inventory of Chemical Substances (AICS)","International Fragrance Association (IFRA) Survey: Transparency List","OECD

List of High Production Volume (HPV) Chemicals","OSPAR National List of Candidates for Substitution – Norway"

Section 16 - OTHER INFORMATION

Denmark Advisory list for selfclassification of dangerous substances

Substance CAS Suggested codes

EDTA disodium salt 139- 33- 3 Xn; R22

INGREDIENTS WITH MULTIPLE CAS NUMBERS

Ingredient Name

CAS

sodium sulfite 7757- 83- 7, 10102- 15- 5

EDTA disodium salt 139- 33- 3, 69772- 70- 9

■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well as

independent review by the Chemwatch Classification committee using available literature references.

A list of reference resources used to assist the committee may be found at:

www.chemwatch.net/references.

■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether

the reported Hazards are Risks in the workplace or other settings.

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or

criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written

permission from CHEMWATCH. TEL (+61 3) 9572 4700.

Issue Date: 7-May-2012

Print Date: 7-May-2012

This is the end of the MSDS.

More magazines by this user
Similar magazines