SWING GATES

dnsistemas.lv

SWING GATES

SWING GATES

STRONG SWING GATES


Technical Features

• Uprights and mesh: Leaf formed of a frame and bars with

square profiles (see table).

• Support columns with square profile (see table), with small

flanges for optionally attaching, as required, the struts,

the end post of the fence, or the grips for embedding in

a wall.

• Adjustable hinges allowing for a better fit of the gate.

• Lock with box and stainless steel keyhole cover (see

detail).

• Barbed wire (extension arm) accessory fastened to the

leaf by means of non-removable screws.

GATE

MEASUREMENTS

STANDARDIZED SIZES

1 X 1 1 X 1,5 1 X 2 2 X 2 3 X 1,5 4 X 1,5 3 x 2 4 x 2 5 x 2 6 x 2

HEIGHT mm (H) 1030 1530 2030 2030 1530 1530 2030 2030 2030 2030

PASSAGE

GAP mm (L)

TOTAL

WIDTH mm (B)

995 995 995 1960 2960 3960 2960 3960 4960 5960

1195 1195 1195 2160 3160 4160 3160 4160 5200 6200

N o OF LEAVES 1 1 1 2 2 2 2 2 2 2

PROFILES TABLE

UPRIGHTS 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40

CROSSBARS 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40 60 X 40

BARS 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30 30 X 30

COLUMNS

100 X

100

100 X

100

100 X

100

100 X

100

100 X

100

100 X

100

100 X

100

100 X

100

120 X

120

120 X

120

STRONG SWING GATES

STRONG SWING GATES COMPONENTS

Lock

Span

Bars

Bars

Pole founding

Doorstop


ANTICORROSION COATING

Galvanized and coated

Galvanized

Galvanized + coated

Galvanized

Steel

Galvanized coating

Steel

· Highly adherent pure polyester T.G.I.C. polymerized coated

finish heat-hardened after degreasing. phosphating, double

rinsing and ecological passivation.

Minimum thickness: 80 microns.

Adherence (ISO 2409): GT=0

Gloss (ISO 2813): 60 degree angle: 95%

Hardness: BUCHHOLZ (ISO 2815)>85

Colours: green RAL 6005, white RAL 9010 or other colours.

SWING GATES


ACCESORY PILLAR FOR RESIDENTIAL COMPLEX

The complete installation kit includes:

A) Sliding door + pedestrian access door with magnetic lock

2

1.Residential pillar 2. Magnetic Lock 3. Sliding door 4. Pivoting door

3

1 4

STRONG SWING GATES

B) Double leaf mechanized door + pedestrian access door with magnetic lock.

2

4

1

3

1.Residential pillar 2. Magnetic lock 3. Pivoting mechanized door 4. Pivoting door.


Assembly

Opening of one-leaf gates:

Inside right opening.

Ground bolt:

Assembly comprised of a metal stop

anchored on the ground and a bolt mounted

in the middle of the two leaves to avoid the

possibility of it being opened from

the outside: (see detail)

SWING GATES


EXAMPLES

STRONG SWING GATES

More magazines by this user
Similar magazines