PDF catalog - Teknolab AS

O
SAMPLE PREP FORMAT OPTIONS
96-well Sample Preparation Products
Process small volume biological fluid samples with 96-well plates for high throughput sample preparation.
Biotage offers two 96-well plates; the industry standard fixed well plate design, and the modular Array style.
Fixed Well Plates
Ideal for assays where sample numbers are high. The one piece
moulded plate holds up to 2 mL per well, and is compatible with all
commonly used liquid handling systems. Process fixed well plates
manually or on instrument decks using the VacMaster-96 Sample
Processing Manifold.
Modular Array Plates
Used for method development, sorbent screening and for assays
where sample numbers are variable. Minimize cost and avoid the
problem of partially used plates by populating the base plate with as
many wells as required. Available in 1 or 2 mL options, the format is
compatible with many liquid handling systems and is processed
manually using the VacMaster-96 manifold.
Array wells can also be processed on a VacMaster-10 or -20 Sample
Prcessing manifold, using PTFE adapters (see page 101)
SPE, Supported Liquid Extraction (SLE) and Filtration Columns
Traditional ‘syringe barrel’ style reservoirs used for SPE, supported liquid extraction and filtration columns, range
in volume from 1 to 150 mL. The columns can be packed with sorbent masses ranging from 10 mg (for small
volume biological fluid samples) up to 10 g for high capacity applications. Process these columns using
VacMaster-10 or -20 Sample Processing Manifolds.
Sample size is not limited to the reservoir volume. Load larger
samples by stacking an empty reservoir above the extraction column
using ISOLUTE Column Adaptors (page 96), or use the Large
Volume Extraction Kit (page 109).
16