PM CTP CAT M EA P 4 X 3 v01 | 2009-02-01 - Industrial GP - ro

Compact electromechanical cylinder
Customized projects
Ultra-compact design
Technical data
Type
Screw
lead
Nominal
force 1)
Peak
force 2)
Linear
speed
Standard
stroke
Overstroke
4)
Dynamic
load
Nominal
power
Controller
size 5)
mm kN kN mm/s mm mm kN kN –
CEMC2104–170–•–D63L 4 9,0 17,9 353 170 1 (x2) 48,1 2,3 16
CEMC2404–•••–2–D82P 4 14,1 28,2 320 90–170 1 (x2) 61,0 4,7 16
CEMC2406–•••–2–D82P 6 9,4 18,8 480 90–170 1 (x2) 61,0 4,7 16
CEMC3004–•••–2–D82P 4 14,1 28,2 266 90–170 1 (x2) 105,0 3,9 16
CEMC3006–•••–2–D82P 6 9,4 18,8 400 90–170 1 (x2) 105,0 3,9 16
CEMC3004–•••–2–D84H 4 27,4 53,1 266 90–170 1 (x2) 105,0 6,2 32
CEMC3006–•••–2–D84H 6 18,3 35,4 400 90–170 1 (x2) 105,0 6,2 32
CEMC3004–•••–2–D86F 4 39,5 83,4 266 90–170 1 (x2) 105,0 6,6 50
CEMC3006–•••–2–D86F 6 26,3 55,6 400 90–170 1 (x2) 105,0 6,6 50
1) Nominal force: can be used 100 % of time at low speed (10 % of maximum speed).
2) Peak force: max force under short time (1 s max) at low speed with selected drive.
4) Integrated at each end.
360