Traditional Streetscape - Hadco

Traditional Streetscape
At a Glance

Traditional Streetscape Lighting
Whether looking to revitalize economic growth and commerce, increase security in a specific area, or design an enjoyable
outdoor space, Philips Hadco is the clear choice. Municipalities must think about more than just aesthetic appeal when
selecting luminaires and site amenities. A sound investment, simple maintenance and good quality that lasts are equally
as important. Philips Hadco’s line of products speaks to all of those concerns.
Philips Hadco’s custom capabilities allow us to meet any design requirement or create a unique identity for any community…
just ask.
Shown within this brochure is only a small cross-section of Philips Hadco’s extensive line of products. For more options,
visit us on the web at www.hadco.com and consult your local representative.
For more LED product information and options visit www.hadcoled.com.
Icon Codes
Throughout this guide, the following codes will help you determine which type of luminaire is best suited for your application.
Tool-Less: Grants no-tool access to ballast,
lamp and photocell for easy maintenance.
LED available in certain fixtures. Please consult
factory for details.
Optical Rib Technology allows less than
2% uplight while providing uniformity, smooth
light levels and virtually eliminating glare.
The degrees of ingress protection are most commonly
expressed as “IP” followed by two numbers, e.g. IP65,
where the numbers define the degree of protection.
6: Dust Tight. No ingress of dust.
5: Water Jets. Water protected by a nozzle
against enclosure from any direction shall
have no harmful effects.
6: Dust Tight. No ingress of dust.
6: Powerful Water Jets. Water protected
by powerful jets against enclosure from
any direction shall have no harmful effects
(26.4 gal/min).
www.hadco.com

Site Amenities
Beautification and revitalization projects can be a vital part of any community. Philips Hadco now proudly offers site amenities
www.hadco.com
All fabricated metal components are steel shotblasted,
etched, phosphatized, sealed then preheated and electrostatically
powder-coated with TGIC polyester powder coatings.
to complete those projects. We furnish the products that create a presence and sense of environment. With a wide range of litter
receptacles, park benches, ash urns and planters, the pairing of Philips Hadco luminaires with site amenities offers municipalities
one resource to fulfill all creative design needs.
SAML01: Litter Receptacle
Steel Construction
Standard tapered formed lid tethered to frame.
Includes inner black plastic liner, four adjustable
leveling feet and vertical solid steel bars
3/8” thick x 1” wide (9.5 x 25.4mm).
Shipped fully assembled.
SAMA01: Ash Urn
Steel Construction
10” (254mm) diameter stainless steel ashtray.
Includes inner black plastic liner, four leveling feet
and vertical solid steel bars 3/8” thick x 1” wide
(9.5 x 25.4mm). Shipped fully assembled.
SAMB01: Bench
Steel Construction
Bench features carefully polished welds, solid steel arm frames
1/2” thick x 2” wide (12.7 x 50.8mm),
seat slats 1/4” thick x 1 1/2” wide (6.4 x 38.1mm).
This very popular bench is durable, functional, attractive and extremely comfortable.
Options
Intermediate (center) armrest available - consult factory.
Note
Minimal assembly required (bolt end units to seat, hardware included).
Palletized - minimum order quantity of (3) per pallet.
SAML02: Litter Receptacle
Steel Construction
Standard tapered formed lid secured to frame.
Includes inner black plastic liner, five adjustable
leveling feet and vertical solid steel bars
3/8” thick x 1” wide (9.5 x 25.4mm).
Shipped fully assembled.
Side Door Opening
Convenient access from the side, door latches
shut. Secure with lock (by others).
We recommend that all Site Amenities be affixed to the ground (hardware by others). The above products can easily be surface mounted. The SAML01,
SAML02, SAMA01 and SAMP01 all require just one anchor bolt. The SAMB01 has pre-welded tabs at the bottom of the legs to enable convenient surface mounting.
For special projects exposed to corrosive environments (including but not limited to by the sea with saltwater exposure or by sand where the wind creates
a sandblasting effect), we offer hot dip galvanizing as an option - consult factory.
Green: Most of the steel used in these products is produced in electric furnaces, the primary ingredient of which is steel scrap.
Therefore, there is an extremely high content of recycled material in our steel products.
NOTE: All Site Amenities backed by 1 year manufacturer’s Limited Warranty.
SAMP01: Planter
Steel Construction
Includes inner black plastic liner, four leveling feet
and vertical solid steel bars 3/8” thick x 1” wide
(9.5 x 25.4mm). Shipped fully assembled.

Decorative Aluminum Poles
Philips Hadco’s extensive selection of poles provides both historic style and structural integrity.
Model
Tenon/Top
Heights
Base
Model
Tenon/Top
Heights
Base
© 2010 Philips Group
P1561
3” O.D.
8’ - 12’
8 1/4” sq. x
27 3/8” H
P3165
3” O.D.
12’ - 18’
17” dia. x
29” H
P1711
3” O.D.
10’ 8” - 16’ 8”
10 1/2” sq. x
22” H
P4020
3” O.D.
12’ - 18’
15” dia. x
46 1/8” H
P1910
3” O.D.
8’ 6” - 14’ 6”
12 1/4” dia. x
20 3/4” H
P4465
3” O.D.
12’ - 18’
15 1/2” dia. x
48” H
P2065
3” O.D.
10’ - 16’
16” dia. x
21” H
P5065
3” O.D.
12’ - 18’
17” dia. x
21” H
P2071
3” O.D.
10’ - 16’
16” dia. x
47” H
P5165
3” O.D.
12’ - 18’
20” dia. x
23 3/4” H
P2165
3” O.D.
12’ - 18’
20” dia. x
25 3/8” H
P8600
6” O.D.
12’, 14’, 16’
11 1/3” sq.
All rights reserved. Certain products illustrated in this catalog may be protected by applicable patents and patent pending.
Philips Hadco will aggressively defend all of its intellectual property. We reserve the right to change details of design,
materials and finishes in any way that will not alter installed appearance or reduce function and performance.
P8800
8” O.D.
25’, 27’, 30’
12” sq.
www.hadco.com
www.hadco.com
P. O. Box 128 • 100 Craftway Drive • Littlestown, PA 17340 • Phone: 1-866-423-2658 • Fax: 717-359-0618
Printed in U.S.A. HAG0410-5M

Traditional Refractive Post-Tops
www.hadco.com
Available with a remarkable selection of pod and globe styles, optics, cages and finials, these luminaires will provide a unique identity.
Our refractive post-tops provide a safer, more shadow-free environment when mounted below tree canopies. Key benefits of our
refractive post-tops are maximum luminaire spacing, exceptional uniformity and increased illumination of vertical surfaces. In addition,
tool-less, hands only maintenance is the Philips Hadco standard.
C52MHLA
Max. Watts:
250W HPS,
250W MH
Acrylic Globe
29˝ H x 28 3/8 ˝ W
R52BANA
Max. Watts:
250W HPS, 250W MH
85W IND
Acrylic Globe
42˝ H x 17˝ W
R52gABA
Max. Watts:
250W HPS, 250W MH
85W IND
Acrylic Globe
42˝ H x 17˝ W
Optical Rib Technology (ORT) Post-Tops
To satisfy Dark Sky friendly needs, Philips Hadco’s Optical Rib Technology offers
the same remarkable selection of styles as our refractive post-tops. Key benefits
of ORT are increased light levels, minimal uplight and an elimination of glare.
TN
Max. Watts:
250W HPS, 250W MH
Acrylic Globe
42˝ H x 17˝ W
IP66 Post-Tops
TW
Max. Watts:
250W HPS, 250W MH
Acrylic Globe
42˝ H x 17˝ W
TT
Max. Watts:
250W HPS, 250W MH
Acrylic Globe
42˝ H x 16 5/8˝ W
If ease of maintenance is the driving factor, Philips Hadco’s IP66 rated post-top
luminaires are the solution. Available in our most popular styles, these
luminaires are designed to eliminate any possibility of the intrusion of water,
insects or dirt. Like our traditional pendants, a single latch provides tool-less
access for ballast, lamp and photocell maintenance without the need to
manipulate the globe creating the most user-friendly post-top luminaire available.
g63K
Max. Watts:
150W HPS, 175W MH
Glass Globe
35 5/8˝ H x 13 5/8˝ W
R65T
Max. Watts:
150W HPS, 175W MH
Acrylic Globe
42˝ H x 17˝ W
R73K
Max. Watts:
175W HPS,175W MH
Acrylic Globe
42˝ H x 17˝ W
R34BCBA
Max. Watts:
250W HPS, 250W MH
165W IND
Acrylic Globe
42˝ H x 17˝ W
R54TAND
Max. Watts:
250W HPS, 250W MH
165W IND
Acrylic Globe
42˝ H x 17˝ W
Traditional Pendants
When higher mounting heights are required
or desired, Philips Hadco’s traditional
pendant luminaires offer distinctive style
and performance. Dark Sky friendly,
high-performance optics are also IP66 rated
which eliminates any possibility of intrusion
of water, insects and dirt. A single latch
provides tool-less access for maintenance
of ballast and lamp creating the most
user-friendly pendant luminaire available.
TF8
Max. Watts:
250W HPS,
250W MH
31 1/2˝ H x 15 1/2˝ W
TF9
Max. Watts:
400W HPS,
400W MH
37 1/2˝ H x 18 3/8˝ W
TF8
Shown With
Optional Flat Brim
(TF8-FB)
31 1/2˝ H x 24 3/16˝ W

Traditional Post-Tops
For additional styles, Philips Hadco’s traditional post-top luminaires offer classic design manufactured with today’s technology
for many years of reliable operation.
T03BCBB
Max. Watts:
250W HPS,
250W MH
37˝ H x 18 1/4˝ W
V600
Max. Watts:
250W HPS,
250W MH
44 1/4˝ H x 18 1/2˝ W
V022
Max. Watts:
250W HPS,
250W MH
47˝ H x 18 1/4˝ W
V651
Max. Watts:
250W HPS,
250W MH
39˝ H x 16˝ W
Site, Area and Flood Lighting
V092
Max. Watts:
150W HPS,
250W MH
48 1/2˝ H x 18˝ W
V681
Max. Watts:
250W HPS,
250W MH
44 5/8˝ H x 19 1/4˝ W
V152
Max. Watts:
250W HPS,
250W MH
41 3/8˝ H x 16 1/2˝ W
V72
Max. Watts:
250W HPS,
250W MH
34 7/8˝ H x 16 1/2˝ W
Philips Hadco’s PA31 and PA5 offer a low-profile, aerodynamic alternative to square shoebox luminaires. The PF3 and WA3
provide flood lighting to accent building facades and signage.
PA31
Max. Watts:
400W HPS, 400W MH
8 1/8˝ H x 33 3/4˝ W
PA5
Max. Watts:
400W HPS, 400W MH
10 3/8˝ H x 30 7/8˝ W
LED Site and Roadway Lighting
PF3
Max. Watts:
400W HPS, 400W MH
15˝ H x 22˝ W
www.hadco.com
V21
Max. Watts:
150W HPS,
100W MH
32˝ H x 13˝ W
V8915
Max. Watts:
150W HPS,
200W MH
35 1/2˝ H x 14˝ W
WA3
Max. Watts:
150W HPS, 175W MH
11 3/16˝ H x 16 13/16˝ W
Philips Hadco’s Evolaire is the perfect LED solution for site and roadway lighting applications and it is the ideal luminaire for both new
and retrofit installations. The Evolaire features the unique Lightspread Technology design consisting of IP66 rated LED panel assemblies
which are field adjustable to six different angles offering multiple distribution patterns. In retrofit situations, the Lightspread Technology
allows the Evolaire to meet light levels and uniformity of existing luminaires regardless of existing pole heights and spacing intervals.
WL33
Max. Watts: 33W
Delivered Lumens: 2400
17 1/16˝ L x 15 3/4˝ W x 7˝ H
WL50X
Max. Watts: 50W
Delivered Lumens: 3400
17 1/16˝ L x 15 3/4˝ W x 7˝ H
WL66
Max. Watts: 66W
Delivered Lumens: 4900
26 5/8˝ L x 15 3/4˝ W x 7˝ H
WL100X
Max. Watts: 100W
Delivered Lumens: 6600
26 5/8˝ L x 15 3/4˝ W x 7˝ H

Transitional Luminaires
These unique designs fit with a wide range of architectural styles and are available in different mounting configurations.
CF14
Max. Watts:
400W HPS, 400W MH
22 1/4˝ H x 21˝ W
CF15
Max. Watts:
400W HPS, 400W MH
27 3/4˝ H x 26˝ W
CF71
Max. Watts:
250W HPS, 175W MH
37 1/2˝ H x 27 3/4˝ W
Lit and Unlit Bollards
CF2
Max. Watts:
150W HPS, 175W MH
18 1/2˝ H x 26˝ W
CF72
Max. Watts:
150W HPS, 175W MH
18 5/8˝ H x 24 1/2˝ W
CF4
Max. Watts:
150W HPS, 175W MH
17 3/4˝ H x 21˝ W
T14
Max Watts:
100W HPS, 100W MH
22 3/8˝ H x 19 7/8˝ W
CF5
Max. Watts:
250W HPS, 250W MH
23 3/8˝ H x 24 1/2˝ W
T20
Max Watts:
250W HPS, 50W MH
31˝ H x 27˝ W
www.hadco.com
CF6
Max. Watts:
150W HPS, 175W MH
18 5/8˝ H x 21˝ W
When low-level lighting and barriers are needed, Philips Hadco’s wide selection of matching styles will complement any architectural setting.
BL31
Max. Watts:
100W INC., 100W MH,
100W HPS, 42W CFL
38 5/8˝ H x 17˝ W
Eu36
Unlit
37 11/16˝ H x 10 3/8˝ W
Bu31
Unlit
37 7/16˝ H x 17˝ W
TB361
Max. Watts:
100W INC., 100W MH,
100W HPS, 42W PLT
37 11/16˝ H x 10 1/3˝ W
EL31
Max. Watts:
100W INC., 100W MH,
100W HPS, 42W CFL
42 1/4˝ H x 17˝ W
F9
Max. Watts:
150W INC., 100W MH,
100W HPS, 42W PLT
33˝ H x 9 11/16˝ W
Eu31
Unlit
42 1/2˝ H x 17˝ W
RD8
Max. Watts:
100W INC., 100W MH,
100W HPS, 42W PLT
42 3/8˝ H x 8˝ W

Arm Brackets
Wraparound and Slipover Bases
www.hadco.com
Philips Hadco’s wide variety of arm styles and mounting configurations allow for the proper installation of any luminaire choice.
HFP210
35˝ H x 26 3/4˝ W
HFP1010
49˝ H x 36 1/2˝ W
PTH2210
17 1/2˝ H x 20 3/4˝ W
Philips Hadco offers one-piece slipover and two-piece wrap around aluminum bases. For harsh environments, one piece PolyTech
slipover bases are also available.
SLB1791
10˝ Hex x 44˝ H (9 1/8˝ I.D.)
10 3/4˝ point to point
4˝ dia.
One-piece
356 HM cast aluminum alloy
WAB2100
20˝ O.D. x 25˝ H (18 11/16˝ I.D.)
4˝, 5˝, 6˝ and 7˝ dia.
Two-piece
356 HM cast aluminum alloy
HFP310
39 1/2˝ H x 45 3/4˝ W
HFP1210
20˝ H x 51 ˝ W
SLBPT3117
17˝ O.D. x 32˝ H
4˝, 5˝ and 6˝ dia.
One-piece
PolyTech
PTH2710
17˝ 3/4 H x 20˝ W
WAB3200
20˝ O.D. x 36˝ H (19 1/2˝ I.D.)
6˝ and 8˝ dia.
Two-piece
356 HM cast aluminum alloy
HFP510
32 1/4˝ H x 19 3/4˝ W
HFP1410
36˝ H x 66˝ W
SLBPT3220
20˝ O.D. x 37˝ H
6˝, 7˝ and 8˝ dia.
One-piece
PolyTech
PTH2810
17 5/8˝ H x 20˝ W
HFH2910
30 1/4˝ H x 27˝ W
TFHAM3
7˝ H x 10 5/8˝ W
Includes Twistlock
Photocell Recepticle
SLBT5019
19˝ O.D. x 19˝ H
4˝, 5˝ and 6˝ dia.
One-piece
Polytech
WAB3300
24˝ O.D. x 42 7/8˝ H (23 1/8˝ I.D.)
8˝ dia.
Two-piece
356 HM cast aluminum alloy
PTH2510
26˝ H x 19 5/8˝ W
HFP910
41 3/4˝ H x 83 3/4˝ W
TFHAM4
9 7/8˝ H x 10 5/8˝ W
WAB1716
16 1/4˝ x 26 3/4˝ H
6˝, 7˝ and 8˝ dia.
Two-piece octagon style
356 HM cast aluminum alloy
WAB5000
17˝ O.D. x 19˝ H (16 1/2˝ I.D.)
5˝ dia. poles
Two-piece
356 HM cast aluminum alloy