Pressure reducing valves REDUFIX - Watts Industries
Pressure reducing valves REDUFIX - Watts Industries
Pressure reducing valves REDUFIX - Watts Industries
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Pressure</strong> <strong>reducing</strong> <strong>valves</strong><br />
<strong>REDUFIX</strong><br />
• Compact, preset adjustable pressure <strong>reducing</strong> valve.<br />
• Outlet pressure setting range : 1,5 to 5 bar.<br />
• Corrosion preventing DZR brass body.<br />
• Female 1/4” pressure gauge connection.<br />
• Maintenance free.<br />
• Ideal for protecting electric hot water storage heaters and household appliances.
PREssURE REDUcIng vAlvE <strong>REDUFIX</strong><br />
Use:<br />
<strong>REDUFIX</strong> is an ideal pressure <strong>reducing</strong> valve for sanitary water systems.<br />
<strong>REDUFIX</strong> is designed for protecting single appliance like hot water storage<br />
heaters and household appliances.<br />
It is directly fitted upstream of the appliance that you want to protect or to water<br />
circuit inlets that you want to protect (kitchen, bathrooms, garden piping etc.).<br />
Approvals:<br />
WRAS (UK), ACS (F).<br />
Advantages:<br />
• Compact<br />
Takes up less space, easier to fit, it is at present the more unobtrusive underneath hot<br />
water storage heaters.<br />
• Ready to install<br />
Factory preset, you can change the setting from 1,5 to 5 bar.<br />
ref. code 82210:<br />
special for safety group<br />
• Any position<br />
The <strong>REDUFIX</strong> can be fitted in any position.<br />
• Robust<br />
Once fitted you can forget it. The <strong>REDUFIX</strong> does not require any special maintenance.<br />
• Tried and tested reliability<br />
On the market for over 20 years, the <strong>REDUFIX</strong> is made at Hautvillers Ouville in France<br />
in our production unit ISO 9001 certified by BVQI.<br />
• Silent<br />
The valve system design and types of seals used ensure operation with no vibration<br />
and no banging about.<br />
• Specific discharge<br />
Discharge is appropriate to isolated appliances like washing machines or hot water<br />
storage heaters.<br />
It has a part in better thermostatic mixer control and controlled water consumption.<br />
• Practical<br />
Its Female 1/4” pressure gauge outlet is located on the front and not under the valve.<br />
Why 3 bar presetting <br />
Because all features introduced by valve manufacturers are measured to 3 bar*.<br />
Too high a pressure over 3 bar would result in accelerating water velocity in pipes<br />
with the risk of:<br />
• Creating water hammer,<br />
• Washing off the grease on ceramic inserts making head and lever movement harder,<br />
• Loosening limestone deposits in pipes causing ceramic inserts to break when taps are<br />
fitted with them,<br />
• Causing water in electric hot water storage heaters<br />
to expand too quickly causing the valve of the safety valve unit to open prematurely<br />
leading to significant water consumption.<br />
So the <strong>REDUFIX</strong> is factory preset at 3 bar.<br />
This safety guarantee has made <strong>REDUFIX</strong> a market success for over 20 years.<br />
* recommandation of French Association of Pumps and Taps <strong>Industries</strong><br />
range <strong>REDUFIX</strong> presentation finish ref. code<br />
F/F 1/2” (15x21) single box nickel plated 82000<br />
M/F 3/4” free union nut (20x27) single box nickel plated 82210<br />
M/F 3/4” free union nut (20x27) under hull nickel plated 82211<br />
F 3/4” free union nut/M 3/4” (20x27) single box nickel plated 82215<br />
M/M 3/4” (20x27) single box nickel plated 82110<br />
M/M 3/4” (20x27) and F/F 1/2” (15x21) (double threaded) single box nickel plated 82007<br />
Compression fitting DN 15 for copper pipe single box nickel plated 82114<br />
Compression fitting DN 22 for copper pipe single box nickel plated 82115
PREssURE REDUcIng vAlvE <strong>REDUFIX</strong><br />
Technical specifications :<br />
• <strong>Pressure</strong> <strong>reducing</strong> valve with cloth diaphragm, can be set from 1,5 to 5 bar.<br />
• Corrosion preventing DZR brass body.<br />
• Diaphragm and seals EPDM & NBR.<br />
• Slotted adjusting screw that can be turned with a flathead screwdriver.<br />
• Factory preset (4 bar at zero discharge for 3 bar working).<br />
• Female 1/4” pressure gauge outlet.<br />
• Maintenance free robust appliance.<br />
• Ideal for protecting electric hot water storage heaters and household appliances (washing machine, dischwasher ...).<br />
• Max. inlet pressure: 15 bar.<br />
• Max. temperature: 70°C.<br />
construction:<br />
description<br />
Body<br />
Finish<br />
Spring<br />
Piston<br />
Diaphragm and seals<br />
Head<br />
Cap<br />
Plug for gauge connection<br />
material<br />
brass DZR CW602N<br />
nickel plated<br />
stainless steel<br />
PSU (polysulfone polymer)<br />
EPDM & NBR<br />
brass CW617N<br />
brass CW617N<br />
P.A.<br />
Recommendations / installation :<br />
- Rinse the upstream pipes carefully to remove oakum, teflon, weld spatter, grit etc., before fitting the <strong>REDUFIX</strong>.<br />
- Fit the <strong>REDUFIX</strong> to the inlet of the water circuit that you want to protect (kitchen, bathrooms, garden piping etc.).<br />
- The setting can be adjusted between 1,5 and 5 bar.<br />
Screw or unscrew the setting screw on the top of the appliance with a screwdriver to raise or lower this setting.<br />
After opening then closing a valve on the downstream circuit, check the pressure on the pressure gauge.<br />
- You do not have to comply with any special position.<br />
- The <strong>REDUFIX</strong> technical specifications do not change whichever operating plan is used.<br />
- The hexagonal plug opposite the head can be taken off for blowing down or draining.<br />
The <strong>REDUFIX</strong> requires no special maintenance, nonetheless we recommend that it is fitted in an accessible place.<br />
Dimensions & weights:<br />
ref. : 82000<br />
F/F 1/2”<br />
ref. : 82210 and 82211<br />
M/F free union nut 3/4”<br />
ref. : 82215<br />
F free union nut/M 3/4”<br />
ref. : 82110<br />
M/M 3/4”<br />
± 0,31 kg ± 0,36 kg ± 0,36 kg ± 0,32 kg<br />
ref. : 82007<br />
double threaded M3/4” F1/2”-<br />
M3/4” F1/2”<br />
ref. : 82114<br />
compression fitting 15 mm<br />
ref. : 82115<br />
compression fitting 22 mm<br />
± 0,32 kg ± 0,34 kg ± 0,38 kg
PREssURE REDUcIng vAlvE <strong>REDUFIX</strong><br />
<strong>Pressure</strong> drop curve / headloss:<br />
<strong>Pressure</strong> drop diagram<br />
Range of use:<br />
• Sanitary cold water.<br />
• Hot water up to 70°C.<br />
• 15 bar max inlet pressure.<br />
• 3 bar (± 0,5) setting pressure<br />
(adjustable from 1,5 to 5 bar).<br />
Under the following conditions : 8 bar inlet<br />
3 bar outlet<br />
Typical installations:<br />
Electrical hot water<br />
storage heater<br />
wall mounting<br />
The 82210 model is specially designed for use with the SFR<br />
hydraulic safety groups for hot water storage heaters.<br />
The 3/4” union nut outlet is used for an easy direct connection<br />
to the SFR hydraulic safety groups threaded in Male 3/4”.<br />
Electrical hot water<br />
storage heater<br />
small capacity<br />
Domestic sanitary cold water application<br />
Hand wash basin<br />
Waching machine<br />
<strong>REDUFIX</strong><br />
Cold water inlet<br />
The photographs, illustrations and descriptions contained in this brochure are given for information only.<br />
<strong>Watts</strong> <strong>Industries</strong> reserves the right to change the technical specifications or the design of these products without prior notice.<br />
WATTS INDUSTRIES France<br />
1590 avenue d'Orange CS 10101 SORGUES<br />
84275 VEDENE cedex - FRANCE<br />
Tel. +33 (0)4 90 33 28 28 - Fax +33 (0)4 90 33 28 29/39<br />
www.wattsindustries.com<br />
E-mail : info@wattsindustries.fr<br />
Re-order no. 55(2)-UK-12/07