Agentase Disclosure Spray data sheet - FLIR.com
Agentase Disclosure Spray data sheet - FLIR.com
Agentase Disclosure Spray data sheet - FLIR.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT OVERVIEW<br />
IDENTIFIES EXACT LOCATION OF<br />
CHEMICAL AGENT<br />
In response to requests from several users of the<br />
<strong>Agentase</strong> CAD-Kit, <strong>FLIR</strong> has developed a spray-based<br />
formulation that changes color in the exact location of<br />
agents on surfaces.<br />
The <strong>Agentase</strong> <strong>Disclosure</strong> <strong>Spray</strong> may be used as a<br />
precursor to decontamination, which saves time by<br />
pinpointing the exact location of agents. The spray is<br />
also well suited to decon assurance applications due<br />
to its high sensitivity to chemical warfare agents on<br />
surfaces. The spray has also been employed to map the<br />
location of contamination over wide areas.<br />
FEATURES<br />
The <strong>Agentase</strong> <strong>Disclosure</strong> <strong>Spray</strong> is a two-<strong>com</strong>ponent<br />
system in which two dry powders are <strong>com</strong>bined with<br />
water in a dual-chambered sprayer just before use.<br />
Once applied to a surface, the aqueous spray rapidly<br />
changes color in the presence of chemical agents.<br />
One version of the spray is specifically formulated for<br />
the detection of nerve agents (G & V series). Another<br />
version detects blister agents. Recent live agent work<br />
at third-party facilities has demonstrated that the<br />
<strong>Agentase</strong> <strong>Disclosure</strong> <strong>Spray</strong> identifies the location of<br />
very low levels of nerve agents and blister agents on<br />
surfaces (<strong>com</strong>plete reports are available upon request<br />
by qualified individuals).<br />
• Pinpoints location of agents on surfaces<br />
• Highly sensitive - Ability to detect submicrogram<br />
(trace) levels of agents<br />
• Works on most surfaces<br />
• Simple to use<br />
• Rapid response (within 5 minutes)<br />
• Focuses decontamination regimens<br />
• Illustrates decontamination efficiency
DEMONSTRATION AND TRAINING KIT<br />
In addition, <strong>FLIR</strong> has developed a training spray which is<br />
identical in operation to the <strong>Agentase</strong> <strong>Disclosure</strong> <strong>Spray</strong>,<br />
but uses a non-toxic simulant to trigger a response.<br />
In the demonstration shown to the right, simulant was<br />
placed in the form of an “x” on the upper portion of the<br />
particle board paneling. Once the training spray was<br />
applied, the positive response to the simulant became<br />
visible within minutes.<br />
Detection limits and interference test <strong>data</strong> are available<br />
upon request for personnel who are qualified to receive<br />
ITAR-controlled information.<br />
Apply the <strong>Disclosure</strong> <strong>Spray</strong><br />
FUNDING AND PROGRAM SUPPORT<br />
Monitor Color Development<br />
DISCLOSURESPRAY_012511<br />
The Americas<br />
2100 Crystal Drive<br />
Suite 650<br />
Arlington, VA 22202<br />
T +1. 877.692.2120<br />
Middle East<br />
Suite 1-11<br />
Building 6E-A<br />
Dubai Airport Freezone<br />
PO Box 371363<br />
Dubai, UAE<br />
T +971 4 701 7195<br />
F +971 4 701 7194<br />
www.flir.<strong>com</strong>/detection<br />
Europe<br />
Piepersberg 12<br />
42653 Solingen<br />
Germany<br />
T +49 212 222090<br />
F +49 212 201045<br />
Asia<br />
Level 28 Gateway East<br />
152 Beach Road<br />
Singapore<br />
T +65.6827.9789<br />
F +65.6295.2567