IBM Mobile Systems ThinkPad 600/600E (2645 ... - LinuxFocus.org
IBM Mobile Systems ThinkPad 600/600E (2645 ... - LinuxFocus.org
IBM Mobile Systems ThinkPad 600/600E (2645 ... - LinuxFocus.org
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Related Service Information<br />
Standby Mode: In standby mode, the following<br />
occurs:<br />
� The LCD backlight turns off.<br />
� The hard disk drive motor stops.<br />
� The speaker is muted.<br />
Note: Standby mode in Windows 98 is called suspend<br />
mode in Windows 95.<br />
The computer enters standby mode when the Fn + F3<br />
keys are pressed.<br />
The computer exits standby and resumes normal operation<br />
when any key is pressed.<br />
Suspend Mode: The following events occur in<br />
addition to what occurs in standby mode when the<br />
computer enters suspend mode:<br />
� The LCD is powered off.<br />
� The hard disk drive is powered off.<br />
� The CPU stops.<br />
Note: Suspend mode in Windows 95 is called standby<br />
mode in Windows 98.<br />
The following events cause the computer to enter suspend<br />
mode:<br />
� The Fn + F4 keys are pressed.<br />
� The LCD cover is closed. If you add a check mark to<br />
the Will not suspend even if LCD is closed box in<br />
the Power Management Properties window, the<br />
computer will not enter suspend mode even if the<br />
LCD is closed. The LCD only turns off.<br />
� The Suspend button is selected in the Fuel-Gauge<br />
program.<br />
� The specified time has elapsed from the last<br />
operation with the keyboard, the TrackPoint, the hard<br />
disk drive, the parallel connector, or the diskette drive;<br />
or the AC Adapter is plugged in.<br />
In Windows 95, the timer is set by the Suspend<br />
Timer selection in the Power Properties window. In<br />
Windows 98, the timer is set by the System standby<br />
timer selection in the Power Management Properties<br />
window.<br />
� The battery indicator blinks orange indicating that the<br />
battery power is low. If you add a check mark to the<br />
Hibernate when battery becomes low box in the<br />
Power Management Properties window, the computer<br />
enters hibernation mode under this condition.<br />
Note: Even if you don't set the low-battery alarm, the<br />
charge indicator will let you know that the<br />
battery is low, and then the <strong>ThinkPad</strong> will<br />
automatically enter the power-saving mode.<br />
This default low-battery behavior is<br />
26