D1 H.264 M Series DVR User Manual

More documents

Recommendations

Info

CLIENT ACCESS BANDWIDTH SAVING SEND EMAIL - Do not set the start time to 23:00 for DLS. - DLS can’t be applied if the date of BEGIN and END is the same. Enable/Disable remote access through network client software. Enable/Disable only key frame transmission. “ON” mode is favorable for use of low network bandwidth. Mostly, set “OFF” for normal use. Enable/disable the send e-mail function.(ON/OFF) NTP TRANSMISSION MODE: Sending an image only of the channel that triggered the alarm when an alarm event is triggered. IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your <strong>DVR</strong> is changed. EVENT ALARM: Enable/disable sending e-mail reports on the channel that triggered the alarm when an alarm event is triggered. MAIL TO: Enter the appropriate email address to enable sending e-mail reports using a virtual keyboard. MAIL SERVER: Enter the appropriate mail server information to enable sending daily e-mail reports using a virtual keyboard. ID: To set the connection user ID for the mail server using a virtual keyboard. (ex.ID@nadatel.com) PASSWORD: To set the connection password for the mail server using a virtual keyboard. MAIL FROM: To set the mail address sent to the destination host using a virtual keyboard. NTP is an abbreviation for Network Time Protocol, which is for synchronizing the clocks of computer systems over variable-latency data networks. 36
PRIMARY SNTP SERVER: Input the address of the primary NTP time server. SECONDARY SNTP SERVER: Input the address of the secondary NTP time server. TIME ZONE: Greenwich Mean Time(GMT) is a term originally referring to mean solar time at the Royal Observatory, Greenwichin London. Because NTP synchronizes with Greenwich Mean Time(GMT) regardless of geography, users must set their own time difference. (Ex.KOREA GMT+09:00) CONNECTON MODE: Select NTP time server connection mode. INTERVAL: Synchronize the clock by hours which is set on the connection period menu. TIME: Synchronize the clock at the time daily which is set on the connection period menu. CONNECTION PERIOD: 1~24 3-7. Setup – SECURITY Mode Press the SETUP button and select SECURITY icon. Then, the SECURITY menu is displayed as picture below. Navigate through the menu items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control and change the value of the menu item. 37
Page 1 and 2: INSTRUCTION MANUAL (N:M_Ver. 2.1_11
Page 3 and 4: These precautions must be followed
Page 5 and 6: Product Components The package cont
Page 7 and 8: Mounting the HARD DISK 1. Before in
Page 9 and 10: Specifications Input Video Output A
Page 11 and 12: Table of Contents 1. Main Features
Page 13 and 14: 9-7-6. Security ...................
Page 15 and 16: Easy software upgrade Instant and
Page 17 and 18: 13 Press to control Pan/Tilt/Zoom o
Page 19 and 20: 3 Number: To select channel (1, 2,
Page 21 and 22: - QUALITY - RECORDING - SENSOR RECO
Page 23 and 24: - DUAL FRAME RATE - DUAL QUALITY 3-
Page 25 and 26: Figure 3.3.1. Recording mode setup
Page 27 and 28: Figure 3.3.2. Schedule recording se
Page 29 and 30: Item Description ALARM OUT Availabl
Page 31 and 32: Figure 3.4.4. PTZ Control Setup Scr
Page 33 and 34: We recommend that you archive any d
Page 35: SET DATE&TIME Select the display da
Page 39 and 40: USER PASSWORD ADMIN, NETOWRK, USER1
Page 41 and 42: NETWORK PORT Set a proper port numb
Page 43 and 44: Table 3.8.2. LAN Item Description I
Page 45 and 46: Figure 3.8.6. Network setup screen
Page 47 and 48: Item SAVE SETUP TO A USB Table 3.9.
Page 49 and 50: Figure 3.10.1. Quick Setup screen I
Page 51 and 52: Audio button. Click this button to
Page 53 and 54: When it clicks a Timeline menu, use
Page 55 and 56: When it clicks an Archive menu, use
Page 57 and 58: Figure 5.1. PTZ Control Screen OSD
Page 59 and 60: 3. Once you select the media, the s
Page 61 and 62: 7. Upgrading Firmware In order to u
Page 63 and 64: 8-3. Live monitoring mode and funct
Page 65 and 66: 3. Set the conditions and click OK
Page 67 and 68: 4. Press the PLAY button. Then the
Page 69 and 70: Setting Event Set the record path a
Page 71 and 72: 9. Network access using the Exclusi
Page 73 and 74: 9-4-1. Main user interface 9-4-2. C
Page 75 and 76: 8-5-2. Main control panel Button LO
Page 77 and 78: To change a time line scale from 24
Page 79 and 80: 9-6-2-2. Archiving Event Log: Event
Page 81 and 82: 9-6-6. About “About” provides n
Page 83 and 84: Resolution: Sets the resolution for
Page 85 and 86: 9-7-3-3. PTZ Setting the PTZ Contro
Page 87 and 88:
9-7-5-1. System Setting the System
Page 89 and 90:
Setting the Send E-Mail: This setti
Page 91 and 92:
9-7-7.Network Select Network to set
Page 93 and 94:
o Password: Input network password
Page 95 and 96:
2. Click CONNECT button, and then s
Page 97 and 98:
3. Select Disk and set the values.
Page 99 and 100:
2. Select site to connect from the
Page 101 and 102:
Notice When it does a backup with N
Page 103 and 104:
Server address: Input IP address of
Page 105 and 106:
Open your web browser. Enter the ro
Page 107 and 108:
Internet (ADSL) Connection using DD
Page 109 and 110:
C. How to access DVR with iPhone 1.
show all

D1 H.264 M Series DVR User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?