ACUMATIC Accumulators and dancer

A c c u m u l a t o r s a n d d a n c e r
ACUMATIC
ACUMATIC 240 / 320 / 500 / 1200
Accumulators and dancer
Basic equipment:
- steel profile frame for stationary use
- roller carriage guided by two roller tracks
- wheels equipped with ball bearings (apart from ACUMATIC 1200)
- ball bearing deflection rollers installed in form of semi circle ( ACUMATIC 1200)
- accumulator tension adjustable and controllable via three-phase servo motor (besides: ACUMATIC 240)
- accumulator tension adjustable by means of weight ( ACUMATIC 240)
- switch-off sensor for lower and upper accumulator range
- sensor for control of winding drives
Additional equipment:
ACUMATIC 240
- stand support for mounting on the floor
- supplementary rollers 6 / 5
- mechanical close return stop
ACUMATIC dip control
- non-returnable light barriers with slit diaphragm for recognition of thinner materials acting as sensor for control of the
winding drive
- dancer roll for dip control and additional weight 2x6kg
ACUMATIC 320, 500 and 1200
- support with roller cage, sensor for knots and cable end recognition
- collect vessel for the material
- speed measuring device
- pneumatic non-return stop
ACUMATIC 240 installed in machine cable return stop support with roller cage, sensor for knot,
cable end recognition and catching of
cable ends
Winding up | Unwinding | Rewinding | Measuring | Cables | Wires | Ropes | Tubes | Hoses
kabelmat ® GmbH | Steinbuckelweg 25 | D-72293 Glatten
Phone: ++49-7443-9670-0 | Fax: ++49-7443-9670-39
kabelmat@kabelmat.com | www.kabelmat.com
-2-