BENEFITS
Highest Efficiency
SunPower TM Solar Panels are the most
efficient photovoltaic panels on the
market today.
More Power
Our panels produce more power in
the same amount of space—up to 50%
more than conventional designs and
100% more than thin film solar panels.
Reduced Installation Cost
More power per panel means fewer
panels per install. This saves both time
and money.
Reliable and Robust Design
Proven materials, tempered front glass,
and a sturdy anodized frame allow
panel to operate reliably in multiple
mounting configurations.
SPR-240E-WHT-D
E19 / 240 SOLAR PANEL
MAXIMUM EFFICIENCY AND PERFORMANCE
The SunPower TM 240 Solar Panel provides today’s highest efficiency and
performance. Utilizing 72 all back-contact solar cells, the SunPower
240 delivers a total panel conversion efficiency of 19.3%. The panel’s
reduced voltage-temperature coefficient, anti-reflective glass and
exceptional low-light performance attributes provide outstanding energy
delivery per peak power watt.
20%
15%
10%
5%
0%
10%
SunPower’s High Efficiency Advantage
14%
Thin Film Conventional SunPower
E18 Series
18% 19%
SunPower
E19 Series
D D
C
B
4
Weight 33.1 lbs. (15.0 kg)
�
MM
(IN)
Grounding Holes
1559
61.39
Electrical Data
Measured at Standard Test Conditions (STC): irradiance of 1000W/m², AM 1.5, and cell temperature 25° C
Peak Power (+5/-3%) P max 240 W
Efficiency η 19.3 %
Rated Voltage V mpp 40.5 V
Rated Current I mpp 5.93 A
Open Circuit Voltage V oc 48.6 V
Short Circuit Current I sc 6.30 A
Maximum System Voltage UL 600 V
Temperature Coefficients Power (P) -0.38% / K
Voltage (V oc ) -132.5mV / K
Current (I sc ) 3.5mA / K
798
31.42
2X 30
1.19
46
1.81
2X 200
7.85
2X 4.2
[.17]
2X 577
22.70
4X 12
.47
SUNPOWER and the SUNPOWER logo are trademarks or registered trademarks of SunPower Corporation.
© November 2010 SunPower Corporation. All rights reserved. Specifications included in this datasheet are subject to change without notice.
A
3
�
E19 / 240 SOLAR PANEL
MAXIMUM EFFICIENCY AND PERFORMANCE
NOCT 45° C +/-2° C
Series Fuse Rating 20 A Tested Operating Conditions
Temperature -40° F to +185° F (-40° C to + 85° C)
Max load
113 psf 550kg/m2 (5400 Pa) front – e.g. snow;
50 psf 245kg/m2 Solar Cells
Mechanical Data
72 SunPower all-back contact monocrystalline
(2400 Pa) front and back – e.g. wind
Front Glass High transmission tempered glass with
anti-reflective (AR) coating
Impact Resistance Hail 1 in (25 mm) at 52mph (23 m/s)
Junction Box IP-65 rated with 3 bypass diodes
Warranties and Certifications
Dimensions: 32 x 155 x 128 (mm)
Warranties 25 year limited power warranty
Output Cables 1000mm length cables / MultiContact (MC4) connectors
10 year limited product warranty
Frame Anodized aluminum alloy type 6063 (black)
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MM
TOLERANCES ARE:
DECIMALS ANGLES
DO NOT SCALE DRAWING
MATERIAL
Dimensions
2
1
Certifications Tested to UL 1703. Class C Fire Rating
�
4X 322
12.69
�
�
3939 NORTH FIRST STREET
SAN JOSE, CA 95134 USA
(408) 240-5500
THIS DOCUMENT CONTAINS PROPRIETARY
INFORMATION OF THE SUNPOWER
CORPORATION, AND ITS RECEIPT OR
POSSESSION DOES NOT CONVEY ANY RIGHTS
TO REPRODUCE, DISCLOSE ITS CONTENTS,
OR TO MANUFACTURE, USE, OR SELL
ANYTHING IT MAY DESCRIBE.
REPRODUCTION, DISCLOSURE, OR USE
WITHOUT SPECIFIC WRITTEN AUTHORIZATION
OF THE SUNPOWER CORPORATION IS
STRICTLY FORBIDDEN.
�
2X 1200
47.24
12 6.6
.26
8X 4.2
.17
2X 915
36.02
2X 1535
60.45
CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT.
Visit sunpowercorp.com for details
Current (A)
7
6
5
4
3
2
1
0
1000 W/m² at 50° C
1000 W/m²
800 W/m²
500 W/m²
200 W/m²
I-V Curve
0 10 20 30
Voltage (V)
40 50 60
Current/voltage characteristics with dependence on irradiance and module temperature.
�
�
�
�
4X 180
7.07
4X 231
9.09
2X 11.0
.43
6X 754
29.69
2X 199.5
7.85
sunpowercorp.com
Document #001-65327 Rev** / LTR_EN
A
MODULE ASSEMBLY, 72-CELL,
DATASHEET DRAWING
C
B
Change language