Download

Release Notes 

TrustedLink iSeries 6.1.4 

W 

elcome to TrustedLink iSeries. These release notes describe the new features, 

enhancements, a list of changes made to the software, and notes from the developers 

for TrustedLink iSeries. This document is a supplement to the TrustedLink 

documentation and online help. 

Refer to the following sections for detailed information: 


■ “V6.1.4 New Features and Enhancements” on page 2 

■ “V6.1.4 Change List” on page 3 

■ “V6.1.4 File Changes” on page 4 

















Copyright © 2006 Inovis, Inc. All rights reserved. 1

V6.1.4 New Features and Enhancements 


The following enhancements are included in TrustedLink 6.1.4: 

■ 

■ 

■ 

“Audit Enhancement” 

“Archive Enhancement” 

“Scripted FTP Enhancements” 

Audit Enhancement 

TrustedLink iSeries users are being asked by their auditors to institute change control 

processes and provide audit information from the TrustedLink application. TrustedLink 

already provides limited change control features and can also provide some transaction audit 

information, but additional audit functionality has been requested. 

The 6.1.4 release provides the foundation for tracking information about additions, 

modifications, and deletions of certain functions that can affect the movement and translation 

of data within TrustedLink. 

Audit information for the following items is included in this release: 

■ Translation Formats 

■ User File Definitions 

■ Trading Partner Relationships 

■ Partner Address Book 

■ Envelope Mapping 

A new audit menu provides the following options: 

■ Ability to configure whether audit information will be captured. 

■ Ability to view a report of the audit log entries. 

Archive Enhancement 

New archive functionality was provided in TrustedLink 6.1.2 and 6.1.3. The new archive has 

different file structures that are incompatible with the archive files provided in older versions 

of the product. In TrustedLink 6.1.4, a new tool is being introduced which allows you to 

convert your old archive files to the new archive file structures, and save the converted files 

offline. Subsequently, you can restore the converted archive data to the Archive Center. This 

functionality has been tested with 6.1.2 archive files but should also work with older 

versions of the archive files. 

Scripted FTP Enhancements 

We continue our support of the Scripted FTP offering with the following enhancements: 

■ 

■ 

■ 

Allow more control over the removal of “carriage return” and “line feed” either 

separately or together within an inbound file. 

Provide Trading Partner Relationship level script variables for outbound 

partnerships. These variables could be used for functions such as doing a change 

directory or building a directory structure on a PUT command based on the 

document being sent. 

Note: With this enhancement, it may not be necessary to create as many copies 

of the Scripted FTP network module as before. 

Add support for “SYSCMD REN” similar to the support for “! REN”. 

2 Release Notes

V6.1.4 Change List 


Request # 

Description 

59259 Clarifies certain error messages on receive translation. 

64481 Corrects a problem when updating a time type field in a user file primary record when 

adding to the Transaction Center. 

65284 Corrects a problem in the Visual Mapper where conditional record associations 

disappear. 

66513 Populates the Interchange Control Agency and Version for generated 997s from the 

trading partnership instead of using default values. 

66899 Provides more detailed status codes (A0, A1, A2) for communication sub-sessions. 

68436 Improves recovery from invalid interchange trailer segments so the following data gets 

processed. 

71928 Grants EDIONR *USE authority for the RCLACTGRP command. 

72729 Allows users of the WRKMBX command and UWRKMBX API to only access 

transactions they are authorized to. 

72962 Allows the Add-to-Transaction Center process to be called more than once within 

the same job. 

73026 Corrects a problem in the Visual Mapper where a user exit program is not retained 

until the map is closed. 

73164 Enhances the validation edits for inbound ISA envelopes. 

73285 Disables the delete option in the Visual Mapper when it is not valid. 

73390 Corrects an intermittent problem with receiving data using Scripted FTP (SF) when 

the Remove or Replace CR/LF option is specified. 

73459 Corrects a problem with compiling a logical file definition where the file, library, and 

member names are all 10 characters long. 

73539 Corrects a problem with changing a translation message severity back to the default 

value. 

74040 Corrects a possible decimal data error with the RCVXML command. 

74181 Corrects a possible duplicate record error in EDMAST when a UNB envelope is 

invalid. 

74715 Adds logging to commerce workflow for the IP Exchange (IX), BizManager (BZ), and 

Scripted FTP (SF) communication modules. 

74850 Corrects a display problem when viewing control policies. 

74884 Relaxes an overly restrictive edit on element set mapping that was introduced in 6.1.2. 

74893 Improves the error handling of the IP Exchange (IX) communications module. 

75360 Prevents multiple prompts when printing more than one Transaction Center entry. 

75694 Corrects a problem with the user prompt when maintaining user menu options. 

75787 Corrects an error with the Cancel function (F12) of the RNMEDILIB command. 

76102 Corrects the display of the time in the Transaction Center after retranslation. 

76350 Reduces the time needed to perform searches within the Transaction Center. 

76357 Corrects document count and elapsed time problems with the Communications 

Session Statistics report. 

76465 Corrects a problem within the mapper where active conditions remain without 

corresponding detail information after conditions are added and deleted. 

Release Notes 3

V6.1.4 File Changes 

Request # 

Description 

76473 Corrects error that occurs when the online archive has not been configured and 

Enter is pressed within certain Archive Center screens. 

76506 Allows a mail status code selected on a prompt to be returned to the Transaction 

Center subset screen. 

76670 Corrects an intermittent messaging problem when running interactive IP Exchange 

(IX) sessions. 

76776 Corrects a problem with the connection type value for the IP Exchange (IX) network 

after a software update is applied. 

76786 Addresses some display issues in the Transaction Center. 

76799 Corrects a problem when validating the GS envelope used as an interchange header. 

76800 Corrects "*RANGE" edit in the Logical File Builder. 

76814 Prevents multiple prompts when printing more than one archived transaction. 

76838 Corrects a display problem after deleting all entries on the last screen of the 

Transaction Center. 

76864 Corrects a problem with saving user link parameters on a Transaction Center subset. 

76888 Corrects a problem with refreshing the Transaction Center list after an entry is 

deleted. 

76928 Corrects a problem with the repeat function in the Transaction Center. 

77001 Corrects a problem with deleting user spaces during the purge. 

77105 Corrects a problem when SAP IDoc names longer than 10 characters are used for 

outbound documents. 

77152 Corrects a menu update problem on software update to V6. 

77268 Corrects a display problem in the Transaction Center when the first entry is deleted. 

77296 Corrects error handling on Work with Purged Transactions when ORG no longer 

exists. 

77354 Allows override of ENDLINFMT on local SAP copy to stream file. 

77656 Corrects a problem with inbound XML CDATA start and end tags. 

77659 Allows XML add-to-Transaction Center when user data exceed16 MB. 

77693 Recognizes UNOZ as a valid syntax id for the UNB interchange envelope. 

77020 Adds BizManager Interface Module (BZ), Harbinger Bisync (HB), IP Exchange (IX), and 

Scripted FTP (SF) Network Modules as valid source networks on the CPYNETTPR 

command. 

78222 Corrects possible authority issue on SAP interface program CSP105. 


There are no changes to the database in 6.1.4. 

4 Release Notes




■ “Archive Improvements” on page 5 

■ “Capacity Expansion Option Enhancements” on page 6 

■ “User File Definition Setup Changes” on page 6 

■ “New Delete Inactive Trading Partner Relationships—DLTNETTPR Command” on page 6 

■ “Miscellaneous Enhancements” on page 7 

■ “New Inovis’ Branding” on page 7 

■ “Advanced Documentation Search Using PDF Master Indexes” on page 7 

Archive Improvements 

The archive enhancement in version 6.1.2 provided you with the ability to configure an 

online archive library to contain new archive history data generated during the TrustedLink 

purge process. In addition, the enhancement provided the ability to work with purged 

transaction data in the new online archive. 

In version 6.1.3 we further enhanced the new archive system by providing offline archiving, 

automatic purging of the online archive, the ability to restore archive data from the offline 

archive to the online archive, and additional user interfaces for working with archive 

configurations and online and offline archive data. 

To summarize, the archive now supports the ability to: 

■ Archive data to online and/or offline storage 

■ Search for an archived document stored either offline or online 

■ Restore document details from offline to online archive 

Specifically, you can: 

■ Archive purged transaction and communication session information and data to 

offline storage 

■ 

■ 

■ 

Search and view archived communication session information and data 

Manually and automatically delete online archive information and data 

Restore archive information and data from offline storage to the online archive. 

With this enhanced archiving functionality, it should no longer be necessary to retain as 

many transactions in the TrustedLink data library. 

Note: The new archive does not support reprocessing or retranslating archived data. 

Important: 

■ 

■ 

If you are upgrading TrustedLink and specified an old archive library in the prior 

release, then you must configure the online archive option. Additionally, if you 

specified a device in the old archive configuration, you must configure the offline 

archive options. You will not be able to run a purge until you configure the online 

or offline archive options. 

The old archive functionality is no longer supported. We recommend that if you 

have your purge process automated calling the UEDPRGMB API or PRGMBX 

Release Notes 5


command that you update your program to call the UEDPRGTC API or PRGTC 

command. Refer to the TrustedLink Application Program Interface Guide for complete 

information. 

Capacity Expansion Option Enhancements 

TrustedLink iSeries is a robust transformation product capable of processing large volumes of 

data. However, some very high volume TrustedLink users have run into several limits when 

processing large amounts of data. These limits are in three general categories: 

1 Maximum number of transactions (e.g. EDI documents) retained in the Transaction 

Center. 

2 Maximum amount of data that can be processed by a single translation job. 

3 Maximum number of objects that IBM allows in a single library on an iSeries. 

The following Capacity Expansion enhancements are now available and can be used if you 

choose: 

■ 

■ 

■ 

■ 

The maximum number of Transaction Center entries can be increased from 

9,999,999 to 99,999,999. Refer to the impact of expanding the Mailbox ID in the 

TrustedLink System Administrator Guide. 

The number of translation message space objects can be reduced so that the total 

number of objects in the TrustedLink data library will be less likely to reach the 

iSeries limit of about 360,000. Refer to message log retention in the TrustedLink System 

Administrator Guide. 

A new expanded files Internal Storage Method can significantly cut the number of 

objects created during translation. Refer to the internal storage method section in 

the TrustedLink Document Setup Guide. 

Note: This new storage method does not have any record length or record ID 

restrictions. 

Over twenty five times as much data can be accessed or created as user file or 

translated data. 

User File Definition Setup Changes 

With the addition of the Capacity Expansion Option functionality, changes were also made to 

the user file definition configuration to accommodate the new expansion features. The 

functional name Optimization Method is now Internal Storage Method and the Method names have 

been modified. 

Additionally, the User File Definition documentation has been completely enhanced and 

modified. We recommend that you review this chapter in the TrustedLink Document Setup Guide. 

New Delete Inactive Trading Partner Relationships—DLTNETTPR Command 

The Delete Inactive Trading Partner Relationships—DLTNETTPR command deletes all inactive 

Trading Partner Relationships for a specified network, direction, and organization. It is 

intended to cleanup obsolete Trading Partner Relationships after using the CPYNETTPR and 

CHGNETSTS commands. 

There is also a new RPTNETTPR command, that can be run before the delete function. This 

report lists the Trading Partner Relationships that are eligible for deletion based on the 

criteria specified in the command parameters. 

6 Release Notes


Miscellaneous Enhancements 

Add JDE User File Field Description—ADDJDEDSC Command 

You can use the Add JDE User File Field Description—ADDJDEDSC command to repopulate 

the JDE field description values for a record format within a user file definition. This 

command has been modified to pull field descriptions from either your OneWorld or 

EnterpriseOne (Unicode or non-Unicode) DB2 database file, F9203. 

Decimal Notation Control Character Selection 

You can now choose the decimal notation for outbound XML Trading Partner Relationships. 

You can retain the default value, ‘.’ period or change the value to a comma ‘,’ from the dropdown 

list. 

Prohibiting Concurrent Sessions for IP Exchange 

The IP Exchange (IX) communications module has been enhanced to prevent multiple 

concurrent sessions for the same copy of the network module. 

-99999 and Hex 55 Support 

If your application files were built to support -99999 to send a zero value, or a special hex 

value to send a blank, TrustedLink can now be configured to recognize these special values in 

new translation formats that you create in Version 6.1.3. This allows you to maintain 

compatibility with your old Version 2 interface files. 

Note: We recommend that you use the keywords and to handle these 

conversions. 

Transaction Center Deleted Mail Column Heading Change 

When viewing deleted mail entries in the Transaction Center, the Sts column heading is 

changed to Last Sts. This reflects the last status of the Transaction Center entry before it was 

deleted. After a purge is run, the Last Sts value becomes the Pre-purge Status in the Archive 

Center if you choose on-line archiving. 

New Inovis’ Branding 

The TrustedLink JWalk Graphical User Interface has been updated to incorporate the latest 

Inovis’ graphics and colors. 

Advanced Documentation Search Using PDF Master Indexes 

We have enhanced the search capabilities within the documentation allowing you to search 

across the entire documentation set using a PDF index (or "master index"). An Adobe PDF 

index is a specially created file that spans multiple Adobe PDF files and is available through 

Search in Acrobat. 

Searching an index is much faster than searching all the text in the individual documents. An 

index search produces a results list with links to the occurrences in the entire documentation 

set, grouped by the book. It is highly recommended that you choose the Match Whole Word Only 

option when searching indexes to significantly reduce the time taken to return results. 

To search an Adobe PDF index file, Acrobat must be opened as a standalone application, not 

within your Web browser. Selecting the Master Index option from the documentation main 

menu automatically opens Acrobat as a standalone application in a new window. We 

recommend that you apply the latest Acrobat Reader version which is provided on the 

documentation CD or download the latest free Adobe Reader from the Adobe website. You 

must have Adobe Reader Version 6.x or later to use the master index search options. 

To use the Advanced Documentation Search function, see “Using the Documentation CD” off the 

Getting Started menu in the documentation. 

Release Notes 7


In addition to the search function, you can navigate the documentation using the link 

function. These links are created within the documentation as cross-references to related 

material. Simply click the blue text and you automatically jump to the page indicated. 

Note: If you are using Windows XP with Service Pack 2, we recommend changing an 

Internet setting to enhance the navigation features of your browser. Refer to Changing the Active 

Content Security Setting in “Using the Documentation CD” off the Getting Started. 

Also, there is a known navigation issue if you are using Adobe Reader 7.05. If you select a 

link from one of the drop down menu options off the main menu you are taken to page one 

of the PDF instead of the exact page for the menu option. This issue is being worked on with 

Adobe and we hope to have this resolved in a future release. 


Request # Subject 

43244 Provides control file option to specify version 2 for RSGRSG without specifying 

ANAA:2. 

65339 Corrects a boundary error when a large amount of data is received. 

67032 Revised message when there is too much data to process in a translation job. 

69919 Corrects problem of being unable to recognize intended decimal separator/triad 

separator. 

70330 Corrects a problem with condition sequencing in the visual mapper. 

71113 Corrects potential problem with duplicate user space names. 

71650 Corrects problem duplicating DSPOBJD file in purge. 

72453 Allows to be mapped to a packed decimal field. 

74238 Corrects 6.1.2 error using Migration Compare Mailbox Tool. 

74333 Corrects "NoClassDefFoundError: Illegal Name” problem on IP Exchange (IX) 

network module. 

74571 Corrects problem with outbound document tracking when the source document is 

using files but the tracked document is using user spaces. 

74609 Corrects possible halt on receive translation with large documents. 

74813 Corrects problem with SAP module install. 

74895 Corrects problem on registration with different code pages. 

75081 Corrects 6.1.2 problem where updating a value in a user file field causes the Add To 

Transaction Center process to fail. 

75162 Corrects problem setting long library lists in the Visual Mapper. 

75195 Corrects 6.1.2 problem finding user links with leading blanks in the Transaction 

Center. 

75361 Corrects problem when trying to exit the Select User Link Subset screen if there is an 

error. 

75814 Corrects problem where product registration menu option is removed after V2.11 

migration. 

8 Release Notes



Database files that have changed since 6.1.2 are: 

■ EDMAST ■ EDMAFAPF 

Important: If you have written programs that access EDMAST, you will probably need to 

recompile these programs after the 6.1.3 update. Additionally, if you are using any third 

party application that may be accessing TrustedLink files, contact your vendor. 

Database changes can occur at any time during the development of TrustedLink iSeries. 

TrustedLink files are designed to be accessed using the provided APIs or commands. If you do 

have programs accessing any of the TrustedLink files, please inform us of your needs so we 

can potentially create APIs to access the files. By letting us create these programs, we can 

ensure a smooth transition from one release to the next and not introduce potential risks in 

your production environments. 

Additionally, there have been many new APIs created in the past few releases. We encourage 

you to review the TrustedLink Application Program Interface Guide and see what is available. 



■ “Logical File Definition Unicode Graphic Field Conversion Support” on page 9 

■ “Trading Partner Relationship Hot Key to Transaction Center Subset” on page 10 

■ “Date Increment/Decrement” on page 10 

■ “Move/Copy Map Instructions” on page 10 

■ “Additional Mapper Edits” on page 11 

■ “Communications Session Expand/Collapse Sub-Sessions” on page 11 

■ “Communications Script Enhancements for FTP and TIP” on page 11 

■ “Sub-Session Control Number Exceptions” on page 11 

■ “Obsolete Data Purge and Archive” on page 11 

■ “Trading Partner Relationship Mass Load” on page 12 

■ “Capacity Expansion Module” on page 12 

■ “Mailbox ID” on page 12 

■ “Message Log Space” on page 12 

■ “Transaction Center Conversion” on page 12 

■ “Compile Error Report” on page 12 

Logical File Definition Unicode Graphic Field Conversion Support 

This TrustedLink enhancement provides more integrated support for application (user) files 

defined with Unicode graphic fields. It will assist customers who are using EnterpriseOne or 

other application databases that use Unicode graphic fields. 

The Logical File Definition Builder has been modified to create logical files that handle the 

necessary conversion of graphic field data to single byte data. This provides an easier solution 

Release Notes 9


for you than manually creating logical files to perform the code conversions. The 1024 byte 

record length restriction within the Logical File Definition Builder has also been removed 

since the translator can now accommodate longer record lengths by selecting the 

Optimization Method Performance. 

For complete information, refer to creating logical file definitions in the TrustedLink Document 

Setup Guide. 

Trading Partner Relationship Hot Key to Transaction Center Subset 

You are currently prevented from changing certain Trading Partner Relationship values when 

transactions exist in the Transaction Center for the Trading Partner Relationship. This 

enhancement provides a link from Trading Partner Maintenance to a subset of the Transaction 

Center entries for the specific Trading Partner Relationship being maintained. 

If the transactions are no longer needed you have the option to delete them and then change 

the Trading Partner Relationship. If the transactions still need to be processed, then you 

should not delete the entries and the ability to change the Trading Partner Relationship will 

be blocked as in prior releases. 

For complete information, refer to viewing Transaction Center entries for a trading partner in 

the TrustedLink Document Setup Guide. 

Date Increment/Decrement 

You can now specify increment and decrement operations in the Visual Mapper when using 

date fields, date elements and date work fields. This adds the ability to manipulate dates by a 

number of days. The resulting value will be the correct and valid date in the date format of 

the field or element to which the data is mapped. 

Additionally, work fields may now be explicitly assigned date format codes where in prior 

releases of TL iSeries the date format code of a work field was implicitly assigned based on 

the mapping. This capability simplifies the conversion from one date format to another 

format when using work fields. 

For complete information, refer to date increment or decrement calculations in the TrustedLink 

Document Setup Guide. 

Move/Copy Map Instructions 

This enhancement in the Visual Mapper allows a map instruction to be moved or copied 

across condition boundaries in addition to the existing functionality in the Show Mapping 

Window for moving map instructions up or down. 

The enhancements are: 

■ Copy and Paste options on the map instruction popup menu that allow copying and 

pasting of map instructions. 

■ 

■ 

Paste option on the segment and condition popup menus that allows the pasting of a 

copied map instruction. 

Status bar on the bottom of the Show Mapping window that displays the description of the 

last copied map instruction. 

For complete information, refer to move/copy map instructions in the TrustedLink Document 

Setup Guide. 

10 Release Notes


Additional Mapper Edits 

With this enhancement, when the user changes the data type of a UFD field, work field, EDI 

element, XML element, or XML attribute, and mapping exists for the item that would no 

longer be valid based on the new item type, the user is asked if they want to remove the 

invalid mapping. If they elect to do so, the mapping is removed and the data type of the item 

is changed. Otherwise, the data type is left unchanged and no mapping is removed. 

Communications Session Expand/Collapse Sub-Sessions 

A new command key enables you to expand or collapse sub-sessions when viewing the 

Communications Session Status display. This enhancement improves the usability of the 

Communications Session Status display when using networks that utilize sub-sessions. 

The collapsed mode displays the overall status of the communications sessions and hide the 

details of each of the sub-sessions. The expanded mode also includes the status for each subsession. 

For complete information, see expand/collapse communication sessions in the TrustedLink Data 

Communications Guide. 

Communications Script Enhancements for FTP and TIP 

You can now copy, display and print scripts for the following networks: 

■ 

■ 

■ 

■ 

Scripted FTP (SF) 

IBM FTP (IF) 

TIP-Connect/400 (TP) 

and copies of these networks 

Note: Scripts can only be copied within the same network or across networks that are based 

on the same parent network. 

For complete information, refer to copying a communication script in the TrustedLink Network 

Setup Guidel. This is a new chapter that consolidates all instructions for maintaining 

communication scripts. 

Share Transaction Center Subsets 

You can now specify whether or not a Transaction Center Subset can be shared with other 

users. 

For complete information, refer to subsets in the Transaction Center in the TrustedLink Data 

Communications Guide. 

Sub-Session Control Number Exceptions 

This enhancement standardizes the recognition, reporting and processing of control number 

exceptions for inbound sub-sessions. For control number checking purposes, all sub-sessions 

for an inbound communications session are treated as if they are a single session. 

Obsolete Data Purge and Archive 

Beginning with TrustedLink Version 6.1.2, we are introducing a new Archive Center. This 

first phase provides the ability to archive online and to search, view and print archived 

purged transactions. 

In a subsequent release, the second phase of the Archive Center will add the ability to archive 

offline, and to restore back into the online archive. The archive function that existed before 

Version 6.1.2 will be removed. 

Release Notes 11


We recommend that you begin using the new functionality immediately so the documents 

you purge and archive online now will be accessible in the second phase of the Archive 

Center. Data purged with the “Old Archive Options” will not be compatible with the new 

Archive Center options. 

Note: Until the second phase of the Archive Center, to move online archive data to offline 

storage will require a process outside of TrustedLink. 

For complete information, refer to purging data and Archive Center in the TrustedLink System 

Administrator Guide. 

Trading Partner Relationship Mass Load 

This function allows you to create Trading Partner Relationships by adding records to a file 

and calling a command. This is intended to be used for a onetime mass load of EDI trading 

partner relationships. Trading Partner Relationships added with this command may still need 

some modifications to be done via the Trading Partner Relationship maintenance option. 

For complete information, refer to the load trading partner relationship command (LODTPR) 

in the TrustedLink Application Program Interface Guide. 

Capacity Expansion Module 

This new optional module enables TrustedLink to operate in a higher volume environment. It 

includes options to increase the maximum number of entries in the Transaction Center, and 

to control the number of objects in the TrustedLink data library. 

Mailbox ID 

With this feature you are allowed to have 99,999,999 mailbox entries, instead of the 

previous limit of 9,999,999. The expanded mailbox ID is one digit longer than the standard 

mailbox ID. 

Note: The mailbox ID field remains 10 characters long. 

Message Log Space 

This option allows you to greatly reduce the number of objects kept in the TrustedLink data 

library by controlling the retention of message log user spaces. The message log user spaces 

are used to provide data for the generation of the Translation Error Report during the 

translation process and for the display of translation messages within the Transaction Center. 

You can indicate that the message spaces should always be retained, should only be retained if 

there are severe errors, or should always be deleted after the Translation Error Report is 

created. If retained, the message log spaces are still deleted when the associated mailbox 

entries are purged. 

For complete information, refer to implementing the Capacity Expansion Module found 

under Optional Modules on the documentation CD. 

Transaction Center Conversion 

Behind the scenes, the Transaction Center was converted from UIM to Display Files to 

support accessing high volumes of transactions. 

Compile Error Report 

A new Compile Error Report is now produced if a fatal error is encountered during the 

compile of a translation format or user file definition. Previously, the compile error 

information was only available in the Joblog. 

12 Release Notes



Request # 

Subject 

66076 Corrects a problem issuing error messages when the LODEDIFMT command is run 

with an invalid library list. 

66232 Corrects the automatic selection of elements for mandatory segments on outbound 

Translation Formats. 

67035 Corrects a problem where the last character in a file could be dropped when receiving 

via the Scripted FTP (SF) network module. 

67045 Removes uninstalled networks from the BizManager Interface (BZ) module web 

services status display. 

67079 Corrects the text of the message received when attempting to compile a Translation 

Format that doesn't reference a User File Definition. 

67173 Corrects a problem where deleting the BizManager Interface (BZ) module did not 

remove the GUI Server and Web Services Configuration information. 

67217 Corrects the Invalid E-mail address error message for report routing. 

67218 Corrects the sequence of options on the Reports Menu. 

67231 Enables the display of second level message text on the Communications Session 

Status screen. 

67251 Corrects a problem where the job number was not returned by the UEDRTVSN API 

for the Communications File Interface (CFI), SNA IBM IE expEDIte/Direct (IA) and 

Sterling Commerce (ON) networks. 

67254 Prints system date instead of job date for report date on several reports. 

67443 Enhances the Caterpillar Network (@C) ID and Password Maintenance screen to 

always display the New Caterpillar Password field. 

67634 Enhances the TrustedLink software update process to shut down active TrustedLink 

integration servers. 

67698 Corrects a problem sending EDIFACT interchanges with the UNG group envelope via 

the IP Exchange (IX) network module. 

67975 Corrects a problem where the printing of a Translation Format could loop. 

68015 Corrects a problem where descriptions could be missing for advanced conditions on 

the Show Mapping report. 

68120 Enhances the second level message text for message SVR0103 Unable to automatically 

start integration server. 

68263 Expands the field size for the Remote XSL directory and Remote graphic 

image directory fields in Trading Partner maintenance for the XML Exchange (XE) 

network module. 

68309 Eliminates the replication of temporary user indexes into the QRPLOBJ library. 

68322 Increases the integration server retry count for copied IP Exchange networks to 

match the base network. 

68388 Corrects a possible problem with inbound XML documents when identifying the 

delimiters of attribute values. 

68450 Enhances the RNMEDILIB command to shut down active TrustedLink integration 

servers. 

68455 Prevents a possible error in the Visual Mapper when the mouse scroll wheel is used. 

68493 Corrects a potential problem of missing segments when an extremely large document 

is added to the Transaction Center. 

Release Notes 13


Request # 

Subject 

68544 Enables the receipt of XML documents when there are empty tags in the header. 

68723 Corrects a problem with Registration when a user elects not to register a mailbox. 

69068 Corrects a problem with Element Sets in the Visual Mapper where the condition 

icon reappears after the condition was removed. 

69188 Corrects a problem in the Visual Mapper with condition validation when the Insert 

Validation option is used from the Show Mapping window. 

69268 Corrects a problem with the 6.1.1 BizManager Interface module receiving files from 

certain versions of BizManager. 

69413 Corrects a possible problem when connecting via IP Exchange with a copied network 

module. 

69429 Corrects a problem with receiving a lock enforcement error (MCH2601). 

69467 Prevents changing separator characters in Trading Partner maintenance if associated 

outbound mail exists. 

69597 Corrects scrolling problems on the Work with SAP User File Information screen. 

69709 Corrects a problem where documents successfully sent using IP Exchange remained in 

a PND status. 

69726 Prevents retranslation of documents with a status of UTP. 

69730 Provides improved error messaging when communications failures occur during 

Registration. 

69747 Corrects problems with entering the Comments field in Trading Partner Address 

Book maintenance. 

69759 Enhances some Trading Partner maintenance warning messages regarding fields being 

protected because associated mail exists. 

69764 Corrects the erroneous highlighting of the Network ID and Description in Trading 

Partner maintenance. 

69998 Corrects IP Exchange problems with error handling when the network connection 

fails to open and doubling of entries in the Pipeline log file. 

70238 Positions the Transaction Center subset selection display to the newly created subset. 

70263 Disables the Paste map instruction function in the Visual Mapper when it is not valid. 

70284 Prevents the deletion of the default subset in the Transaction Center. 

70349 Prevents mixing element set map instructions with non-element set map instructions 

in the Visual Mapper. 

70374 Allows inbound data to move to SAP for User Profile IDs more than 8 characters 

long. 

70789 Changes the update process to not replace existing scripts for the IBM EX expEDIte 

Base/400 (EX) network module. 

71421 Corrects a possible problem mailboxing inbound documents when a segment 

terminator is preceded by a release character. 

71677 Corrects a problem where the CDATA value in an XML document does not map. 

71760 Corrects the updating of the Report Routing address file on a point release update. 

71934 Prevents problem launching Visual Mapper when libraries with @ in library name are 

in the library list. 

72015 Corrects format of certain data types in Transaction Center print 

72017 Corrects problem with display of certain data types in Transaction Center details. 

14 Release Notes


Request # Subject 

72021 Suppresses warning message for mapping truncation when you select the option 

Don't show this message again during the same mapper session in the Visual 

Mapper. 

72146 Corrects display problem in Show Mapping window after using an insert function in 

Visual Mapper. 

72523 Corrects a problem on a TrustedLink update if the libraries had previously been 

renamed with the RNMEDILIB command. 

72534 Corrects a Trading Partner maintenance problem when not sending a graphic image 

file for an XML document on the XML Exchange (XE) network. 

72540 Corrects a duplicate key error in Commerce Workflow when setting the status code 

in the I4STATPF file. 

72902 Corrects a problem on the SAP interface where the IDOC segment name is longer 

than 13 characters. 


Database files that have changed since 6.1.2 are: 

■ 

■ 

■ 

EDLFDPPF 

EDSUBSPF 

EDUDFTPF 



■ “BizManager Integration Enhancement” on page 15 

■ “IP Exchange Network Module Enhancement” on page 15 

■ “Copy Network Trading Partner Relationship (CPYNETTPR) Command” on page 16 

■ “Translation Format TPR Report” on page 16 

■ “Default Open Mode and New Visual Mapper Compile Defaults” on page 16 

■ “OneWorld Field Descriptions” on page 16 

BizManager Integration Enhancement 

BizManager is the recommended end-to-end AS2 solution for TrustedLink. In order to 

provide enhanced functionality for BizManager users, an option has been added to the 

Communications Session Status and the Transaction Center to view the BizManager 

transaction status and audit history logs. You are able to see these current detailed status and 

logs directly from TrustedLink. 

In recognition of the tighter coupling of TrustedLink and BizManager, the IPNet BizManager 

(BZ) network module name is changed to BizManager Interface. 

IP Exchange Network Module Enhancement 

The IP Exchange (IX) network module and the registration process are enhanced to use the 

latest JAVA-based version of our communications software to connect to the Inovisworks 

Value-Added Network. 

Release Notes 15


Verify that you have met the Technical Requirements as described in the TrustedLink Installation, 

Migration, and Updates Guide Installation, Migration, and Updates Manual before upgrading to 

Version 6.1.2. 

You must also configure the Integration Server for each copy of the IP Exchange Network 

Module. Refer to integration server in the IP Exchange Network Module documentation for 

complete information. 

Copy Network Trading Partner Relationship (CPYNETTPR) Command 

The Copy Network Trading Partner Relationship—CPYNETTPR command programmatically 

copies all trading partner relationships (TPR) associated with one network to another. 

You can use this command when you need to change networks and want to automatically 

copy all your existing trading partners associated with certain existing networks (source) to 

certain new networks (target) instead of manually creating each TPR. 

Translation Format TPR Report 

The Translation Format TPR Report provides a list for one or all translation formats and the 

trading partner relationships that use the selected translation format(s). Details about the 

translation format and each trading partner are provided in this report, including, whether or 

not mail exists. 

This report can be printed from within the Translation Format, from the Reports Menu, or by 

using the PRTFMTTPR command. 

Default Open Mode and New Visual Mapper Compile Defaults 

When opening a translation format or user file definition, you can set or change the default 

user file definition open mode method to be Update or Read-only by selecting the open 

method and checking Make this the default open mode. 

When compiling a translation format, you can set or change the default for how you want to 

compile, by selecting the compile method (Interactive or Batch) and checking Make this 

the default compile method. 

OneWorld Field Descriptions 

The Add User File Field Description (ADDJDEDSC) command can be used to repopulate the 

field description values for a record format within a user file definition. This command pulls 

the field descriptions from your OneWorld DB2 database file, F9203. 


Changes included in the TrustedLink 6.1.2 are: 

Request # Description 

41878 Corrects problem with synchronizing mailbox passwords for IX network modules 

that use the product password. 

49885 Improves wording on grace period message. 

53898 Improves wording on software disabled screen. 

54636 Corrects problem when importing duplicate internal conversion table entries. 

54669 Corrects problem that no SAP status messages are generated for the IP-based 

network modules. 

16 Release Notes


Request # 

Description 

55220 Corrects problem of not assigning new library name to class library of routing entries 

for subsystem EDI4XXRS during the RNMEDILIB process. 

56132 Corrects possible problem where UNB envelopes are not processed properly when 

the length of the envelope data is greater than 270. 

60474 Corrects problem of an SAP outbound job going into a loop when the path name is 

greater than 76 bytes. 

60677 Adds a new Translation Format TPR report that shows one or all translation 

formats and the trading partner relationships that use the format(s). 

60775 Corrects several problems with SAP instance definition screens. 

60824 Corrects problem of printing an additional line with a blank trading partner ID after 

each page break in the add to mailbox error report. 

60935 Allows user to specify defaults for UFD open mode and map compile method in visual 

mapper. 

61526 Prevents problem of send session ending in error when UNB envelope with syntax 

version 4 is used and all envelope fields are filled to the maximum. 

61807 Corrects problem of not being able to specify non-numeric values in version/release 

of the UNG with UNB syntax version greater than or equal to 2. 

61829 Corrects possible problems during the network install process when creating copies 

of the SF network module. 

61863 Prevents a user space name error from occurring when an incomplete ISA envelope is 

received. 

62034 Prevents potential problem when changing user ID and password and subsequently 

updating the driver records using the GEIS LU6.2 module. 

62232 Corrects problem when selecting a condition while the show mapping window is 

open in the visual mapper. 

62458 Corrects a problem with creating a new UFD after an existing format is opened with 

the UFD in read-only mode. 

62539 Corrects a problem with compiling an outbound UFD when a new format and new 

UFD are created at the same time. 

62565 Prevents entering of CCSIDs in the scripted FTP module that are not valid on the 

operating system. 

62746 Corrects problem of a new UFD opening in read-only mode. 

62884 Prevents the $$ADD driver record from being corrupted during the send process 

while using the Caterpillar network module. 

62889 Corrects mailbox serial number update problem when using the IP Exchange mailbox 

setup. 

63038 Corrects problem when converting a user link value to a real type number. 

63047 Corrects problem with the add to transaction center session number not being 

printed on the translation summary report. 

63057 Corrects problem with path name of Remote XSL Directory and Remote Graphic 

Image Directory when using the XE network. 

63141 Corrects problem formatting real data type element values when the source field is 

smaller than the element minimum length. 

63216 Corrects problem with sending EDIFACT documents using the CM network module. 

63247 Corrects user link field mapping when the field's record is not present. 

63281 Corrects element selection problem for composite documents in the element routing 

function of the TPR. 

Release Notes 17


Request # 

Description 

63419 Corrects possible problem of XML attributes not being written to the user file. 

63488 Corrects problem with printing the group envelope map listing. 

63716 Corrects truncation problem in the visual mapper with constant values larger than 80 

bytes. 

63915 Corrects possible problem recognizing an unwrapped interchange when there is a 

TPR defined for the network with a user defined envelope. 

63962 Prevents uninstalled networks from being displayed in the BizManager icon network 

selection list. 

63969 Improves messages that are displayed during the rename EDI library process. 

63998 Enhances cleanup of orphaned S and M user spaces during a purge/reorganization. 

64004 Adds the ability to add JDE System 47 field descriptions to a User File Definition 

record. 

64039 Corrects the timing of when certain error messages are displayed during the creation 

of a new format using the visual mapper. 

64043 Corrects handling an unexpected termination of a communication session by the 

remote network when using the Scripted FTP module. 

64433 Corrects problem with the JWALK.INI file that may occur after using the RNMEDILIB 

command. 

64464 Corrects problem of not automatically selecting or de-selecting the outer elements in 

the mapper tree when selecting or de-selecting a sub-element. 

64522 Relaxes the password edit for the Caterpillar network module. 

64526 Corrects problem with the send compiler on the handling of loop item sequence 

numbers when loop boxes are inserted. 

64586 Corrects problem with 0 objects not restored message on MODINSTALL 

command. 

64599 Corrects GUI panel prompt on SELORG command. 

64654 Corrects problem after migration when a receive translation job is submitted and the 

processing definition specifies JOBQ(*CURRENT). 

64704 Corrects automatic selection problem for a segment and its mandatory elements 

when a segment is changed to mandatory. 

64754 Corrects screen display for EX network envelope information within TP maintenance. 

64903 Corrects the prompt text when changing the sequence number of a physical file 

within the logical file builder. 

64910 Corrects problem with date and time data types that causes receive documents to 

have a status of T/E when using envelope mapping. 

65172 Relaxes the password edit for the Transettlements network module. 

65207 Allows the *PUB organization to be retained when importing a new address book 

entry. 

65337 Enhances cleanup of J user spaces after a successful purge. 

65348 Enhances the IP Exchange (IX) module and registration by removing the remaining 

C++ dependencies and improving the JAVA implementation. 

65405 Corrects problem in reporting SAP status messages for sub-sessions. 

65502 Corrects problem of inactivating PR 000 TPRs defined on the IA and IE networks. 

65513 Corrects IFS file handling for the BZ, CC, IF and IX network modules. 

65559 Corrects the tab key order of the controls on the Source/Target tab of the UFD 

Properties form. 

18 Release Notes


Request # 

Description 

65689 Adds new command CPYNETTPR that gives ability to copy all trading partner 

relationships from certain networks to certain other networks. 

65838 Corrects problem with path name for Remote XSL Directory and Remote Graphic 

Image Directory when sending XML using the XE module. 

66071 Corrects problem of recognizing XML markup sequences on long XML elements. 

66085 Prevents add-to-transaction-center problems if only the XML standard is loaded. 

66110 Corrects the deletion process of records from the EDI control file. 

66234 Adds 'W' to the list of AK501 codes considered as REJ for Transaction Center FA 

status. 

66270 Adds an optional parameter called Retain all blanks to the RCVXML command so 

that significant white space will not be truncated. 

66348 Corrects problem when receiving more than 9999 documents in one session and 

specifying interchange level commit. 

66388 Enhances the integration with the BizManager network module. 

66406 Prevents entry of organization *ALL for a new format or UFD in the visual mapper. 

66411 Corrects a potential problem of some documents not automatically moving when the 

communication file interface process is called repeatedly. 

66427 Corrects problem of not being able to reset the default properties for the first subelement 

within a composite element. 

66525 Changes BZ module name from IPNet BizManager to BizManager Interface. 

66670 Trims leading zeros in SE01 for outbound generated 997s. 

66809 Prevents error on RSTUFD command when UFD references more than 99 formats. 

67561 Always mailbox received TA1 documents as UTP. 

67628 Adds the ability to force a SEND card on an Advantis network communication via a 

control file option. 

67632 Prevents significant white space from being stripped off when an XML document is 

written to the IFS for viewing in the browser. 


File changes included in V6.1.1: 

■ 

EDINTSSNPF 


The following new features and enhancements are included in version 6.1.0: 

■ “Scripted FTP Enhancements” on page 20 

■ “IP Exchange (IX) Module JAVA Upgrade” on page 20 

■ “BizManager Interface (BZ) Module” on page 20 

■ ““Position to” on the Communications Session Status Display” on page 20 

■ “IBM EX expEDIte Base/400 (EX) Enhancements” on page 22 

■ “Inbound Syntax Checking—Translation Error Handling” on page 21 

Release Notes 19


■ “Additional Detail Generated for 997 Acknowledgements” on page 21 

■ “Manually Flag Sent Mail as Acknowledged” on page 22 

■ “Report Routing via SMTP” on page 22 

■ “IBM EX expEDIte Base/400 (EX) Enhancements” on page 22 

■ “Get Mailbox Details by Communication Session API” on page 22 

■ “Change Network Status Command” on page 22 

■ “Subsession Information API” on page 22 

■ “Documentation Enhancements” on page 22 

■ “Miscellaneous Enhancements” on page 23 

Scripted FTP Enhancements 

Scripted FTP enhancements include: 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

Interface to use IBM SSL FTP parameters on OS V5R2 and above. 

Option for outbound session level commit. 

Ability to run script commands prior to the PUT within a !Put_Session loop. 

Additional script variables. 

Ability to insert CR/LF after every segment terminator for outbound delimited EDI. 

Ability to remove CR/LF from all inbound data. 

Option to convert EBCDIC x’15’ (New Line) to CR/LF and vice versa. 

Changes data encoding conversion to use CCSID of IFS file and CCSID of job for inbound 

data. 

Ability for users to specify outbound IFS file data encoding (CCSID). 

Provides sample scripts for GXS, TRADANET, IBM, and BT EDI*Net. 

IP Exchange (IX) Module JAVA Upgrade 

This enhancement replaces the C++ client with a newer Java client. This change provides an 

interface that is more reliable, is easier to maintain and troubleshoot, and is more portable for 

future development. 

Important: If you are using the IP Exchange module, install the Java Developer Kit 1.4 before 

you update TrustedLink to 6.1.x. 

BizManager Interface (BZ) Module 

The BizManager Interface (BZ) module is part of the TrustedLink base product (previously 

delivered on a separate CD) and is enhanced so you can copy the BZ network module. 

You can also launch the BizManager User interface from BizManager icon on any TrustedLink 

menu. 

“Position to” on the Communications Session Status Display 

TrustedLink is enhanced to Position to by date or session ID in the Communication Session 

Status display. 

20 Release Notes


Additional Sort Options in Trading Partner Maintenance Lists 

TrustedLink is enhanced to sort by the trading partner relationship description in the trading 

partner relationship display. A name sort was added to the address book display. 

Inbound Syntax Checking—Translation Error Handling 

TrustedLink is enhanced to check for additional inbound translation errors including errors 

based on Syntax Notes. You can activate this feature by using the Additional Syntax Checks 

option through the visual mapper. 

Additional syntax checks can be applied to any inbound translation format regardless of the 

standard of the format. Additional syntax checks include: 

■ Segment and element requirements ■ Element data type 

■ Element maximum length ■ Syntax Notes 

■ 

■ 

■ 

Syntax Notes define the logical relationships between elements and sub-elements in a 

given segment. TrustedLink currently supports ANSI X12 and UCS Syntax Notes from 

version 3030 and later. 

Before version 6.1.0, some basic syntax checking was performed during inbound 

translation. In version 6.1.0, this same basic syntax checking is still performed in 

conjunction with the newly provided additional syntax checking. You can select the level 

of syntax checking as described below: 

ALL—additional checks performed on all segments and elements whether or not they are 

selected. 

Selected segments only—additional checks performed only on selected segments. 

None—checking as it was prior to version 6.1.0 with no additional syntax checking 

performed. 

Additional Detail Generated for 997 Acknowledgements 

This enhancement only applies to ANSI X12 functional acknowledgements (997). 

Automatically generated CONTRL and 999 acknowledgements are unchanged. 

TrustedLink can generate additional segments in the outbound 997 functional 

acknowledgments. This occurs when the segment/element level acknowledgement is 

selected in the trading partner relationship and additional inbound syntax checking is 

specified in the receive translation format. 

TrustedLink supports the following levels of auto-generated 997 acknowledgements: 

■ Group—previously known as Summary. 

The AK1 and AK9 acknowledgement segments are generated based on documents 

included in the received group envelope. 

■ 

Transaction Set—previously known as Detailed. 

The AK2 and AK5 acknowledgement segments are generated based on the documents 

received. This level includes the AK1 and AK9 segments. 

■ Segment/Element—new level in auto-generated 997. 

The segments created in the functional acknowledgement based on the level of syntax 

checking performed against the segments and elements defined in the map. 

This level includes the AK1, AK2, AK5 and AK9 segments. 

Release Notes 21


The AK3 and AK4 acknowledgment segments are also generated based on the segments 

and elements received in the transaction set. The AK3 and AK4 segment creation is 

dependant on the selection of additional syntax checking within the translation format. 

Your trading partner configuration maintains your current acknowledgment settings based 

on the new terminology defined above. If you previously selected summary, it now shows 

group as the selection. If you previously selected detailed, it will now show transaction set. 

Manually Flag Sent Mail as Acknowledged 

This enhancement allows you to change the functional acknowledgement status of sent mail 

from waiting (WTG) to receive (RCV) in the Transaction Center. This may be performed on a 

outbound Transaction Center entry with a WTG functional acknowledgement status. 

You can still use the mailbox entry update functional acknowledgement status (ACKMBXE) command to 

perform this function. 

Report Routing via SMTP 

You can send any TrustedLink report and print outs using the SMTP server on your iSeries. 

Anything that prints can be routed as an e-mail attachment using Report Routing; for 

example, error reports, communications session reports, mailbox prints. 

Note: Before you can route reports to an e-mail address, you must active the report function. 

Refer to activating e-mail report routing in the TrustedLink Data Communications Guide. 

IBM EX expEDIte Base/400 (EX) Enhancements 

Adds support for TCP/IP and the SENDEDI command when using the IBM EX expEDIte 

Base/400 (EX) network module. 

Get Mailbox Details by Communication Session API 

The Get Mailbox Details by Communication Session—UGETMBXS API programmatically 

identifies the mailbox IDs of all Transaction Center entries for a given communications 

session number. This API also returns document status and other information. The related 

GETMBXS1 and GETMBXS2 commands were also added. 

Change Network Status Command 

Adds a new Change Network Status—CHGNETSTS command programmatically changes the 

status of all trading partner relationships for a given network acronym. 

Subsession Information API 

Adds new Subsession Information—USUBSSN API programmatically returns sub-session 

numbers within a given master session. 

Documentation Enhancements 

The following documentation enhancements are included in the 6.1.2 documentation: 

■ 

Enhanced API/Command Usage Scenarios 

Provides detailed scenarios for sending and receiving documents using a variety of APIs, 

commands and user exit programs. 

■ Equivalent 2.11 APIs, Commands, and Program Calls Available in 6.1.2 

Provides a list of existing APIs, commands and program calls for version 2.11, and the 

equivalent APIs, commands and program calls you can use in version 6.1.2. 

■ 

References to Get2Connect.net are changed to inovisworks.net. 

22 Release Notes


Miscellaneous Enhancements 

Miscellaneous enhancements include: 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

Eliminates the IBM Java toolbox compile from product update. 

Allows sending of XML !DOCTYPE Prolog. 

Allows HTTP port override for XML display. 

Allows UNH01 Envelope override. 

Upgrades to version 3.2C3 of Jwalk. 

Removes orphan user spaces during purge reorganization. Purge time might be increased. 

Eliminates security level 40 ‘object domain violation’ message from the joblog during 

translation. 

Gives user control over which system reply entries are added during communications. 

Adds document control number to the functional acknowledgement matching errors of 

the Communications Session Exception report. 

Improves generation of audit journal entries of user space objects for mirroring software. 

Adds an optional communication session ID as a return parameter on batch 

communications program calls. 

Enhances TrustedLink to run with up to 250 libraries in user library list. 

Adds more HL level detail to translation format print. 

Changes user file definition file access method so there is no default. 

Uses shared file opens to reduce number of ODPs for mapper server programs. 

Allows you to specify the character translation table to be used for certain network 

modules, including: 

■ 

■ 

■ 

■ 

Cyclone Commerce (CC) 

BizManager Interface (BZ) 

IBM IE via TCP/IP FTP (IF) 

IP Exchange (IX) 


Changes included in the TrustedLink 6.1.0 are: 

Request # Description 

45620 Corrects problem with UNH when using control file feature to designate user 

mapping of control number. 

47820 Corrects problem with TPR maintenance on IA, IE, or EX copied network. 

48670 Corrects problem where garbage data prints intermittently on translation format 

listing. 

51271 Corrects V2 to V5 migration problem on receive map with conditions on 

qualifier/qualified element pairs. 

51385 Corrects receive compiler problem with multiple ‘OR’ conditions. 

Release Notes 23


Request # 

Description 

53911 Corrects possible problem with occasional data loss when receiving private format 

messages following an EDI interchange. 

54308 Corrects possible problem with translation of inbound documents using element 

routing when UFD is set to optimize for performance. 

54427 Corrects handling of inbound document reference/control numbers that have 

leading blanks 

54477 Adds ability to map !CDATA data for inbound XML 

54536 Adds ability to connect via TCP/IP using the EX network module. 

54751 Corrects problem with UGETATM not finding the add to mailbox session number. 

54752 Corrects problem migrating user defined TRADACOM maps from V2 to V5. 

54770 Corrects problem where SAP status message 22 is not being created properly. 

54786 Corrects problem when using ADDMBX with a direct access method user file 

definition and the files reside in multiple libraries. 

54955 Preserves sequence of user file data on V2 to V5 migration to correct problem with 

retranslation of outbound documents. 

54971 Corrects problem with IA batch communications on V5 with pre-communications 

exit program library. 

54999 Prevents FMTSRCPF is in use error when compiling maps. 

55118 Corrects problem of PND record in control file being ignored for TIP module. 

55159 Corrects possible problem where an XML attribute does not map for a receive 

document. 

55173 Corrects possible looping problem when de-enveloping multiple STX interchanges. 

55209 Corrects problem where the TIP Connect module does not process documents for 

a failed session. 

55231 Corrects problem where wrong path name is generated on display in Transaction 

Center of XML using custom stylesheet. 

55286 Corrects problem displaying SAP user file information. 

55341 Corrects possible checkpoint error with conditional HL mapping. 

55401 Corrects problem with Transaction Center display of negative values in user file 

data. 

55417 Corrects problem where mapping an ISO data to an alphanumeric field causes ATM 

to end in error. 

55446 Corrects problem with EDIFACT envelope versions when changing versions 

between EDIFACT and non-EDIFACT standards. 

55482 Corrects assignment of record IDs in user file data on V2 to V5 migration for 

internally defined UFDs. 

55675 Corrects problem in outbound HL documents of more checkpoints than set points 

when the first HL is associated to the document primary record. 

55695 Corrects possible problem of wrong value being passed in the segment tag 

parameter to an element exit program. 

55816 Corrects possible problem with automove when documents with different 

optimization settings are mixed in one session. 

55927 Corrects communications session record counts for HB network module. 

55957 Prevents failed status on import of UCCNET templates. 

55999 Corrects problem where some map instructions are not created when some HL 

elements are not selected. 

56022 Corrects problem with IBM FTP module not working on 5.4.1. 

24 Release Notes


Request # 

Description 

56059 Corrects problem with ADD to Transaction Center user exit program and 

distribution lists. 

56095 Corrects problem with DTD importer due to special characters in comments. 

56167 Eliminates IP Exchange send sessions with STRD status when there are no RDY 

documents. 

56202 Enables prompting for network alias for outbound XML in TPR maintenance for BZ 

network. 

56230 Removes the decimals from the keyword when mapped to a TM 

type element. 

56332 Corrects BZ module IFS authority issue, where directories were being created with 

data authority *NONE. 

56438 Reduces problems navigating Transaction Center with large volumes of data. 

56568 Corrects add to mailbox problem using DDM files with direct access. 

56586 Corrects problem of overflow error occurring on optional loop starts that have no 

mandatory elements. 

56631 Enables control file option to add “!DOCTYPE” prolog record to outbound XML 

message. 

56676 Corrects duplicate record problem with Commerce Workflow Director. 

56791 Corrects problem where the enveloper program fails when Trading Partner 

Relationship is in use. 

56806 Enhances Scripted FTP module. 

56946 Corrects compiler error with more than 9999 segment IDs on a record association. 

57011 Corrects problem where add to Transaction Center fails when TPR is allocated. 

57056 Prevents looping in Transaction Center fails when TPR is allocated. 

57134 Corrects problem where Error Message Severity reverts back to default after 

compile of map. 

57247 Enables control file option for UNH to change values in element 1.0. 

57249 Corrects problem of the maximum occurrence field being incorrectly disabled when 

maintaining an XML element in the visual mapper. 

57271 Improves performance when pasting a large number of XML elements in the 

mapper. 

57274 Corrects problem where compile of very large receive XML map ends in error. 

57307 Adds document counts on the communication session statistics reports for the 

Scripted FTP module. 

57422 Adds USUBSSN API that returns subsession numbers. 

57453 Enhances RNMEDILIB to check for object types such as *SQLPKG that cannot be 

renamed. 

57591 Enhances user control of inbound LS/LE processing. 

57603 Disables Duplicate Values validation option on workfields in visual mapper. 

57655 Corrects VDA envelope mapping problem. 

57784 Corrects problem of user file definition changing field lengths when date or time 

formats are assigned. 

57811 Adds file EDSNSPF to the purge and reorganization. 

57814 Corrects Scripted FTP module to not insert segment terminators when sending 

private format data. 

Release Notes 25


Request # 

Description 

58004 Corrects problem of assuming that all sources of an advanced condition are the 

same as the first. 

58051 Corrects problem with Commerce Workflow Director routing. 

58056 Corrects problem with Scripted FTP module where send sessions do not appear on 

communication session report. 

58149 Corrects problem where not all elements in the VDA envelope are mapped during 

envelope mapping. 

58254 Corrects problem where “BIN” in text would sometime cause an error to be 

reported on the communications session exception report. 

58316 Corrects problem where entire inbound session fits on one record. 

58379 Correct problem with IF module reporting a NORM session status, regardless of 

true state. 

58678 Corrects problem with user ID and password on HB copied networks. 

58770 Corrects possible problem importing DTDs. 

58908 Corrects problem deleting work fields in visual mapper. 

58949 Corrects problem of send sub-sessions not being updated prior to postcommunications 

user exit program running. 

59075 Corrects problem with STRD status on Scripted FTP module when there are no 

documents to send. 

59108 Corrects control policy problem when importing more than 99 trading partner 

relationships at a time. 

59141 Corrects problem with ON module where successful documents are not changed 

from PND to SNT if line drops. 

59146 Corrects 2.11 to 5.4.1 migration failure with duplicate record in file EDUMAPL3. 

59182 Adds optional file/library/member override parameter to the ADDMBX command. 

59288 Corrects problem of not receiving an error message on a send document when a 

missing mandatory (changed from optional) segment occurs. 

59322 Allows CHGTPRSTS command to be run from within an interactive program. 

59372 Corrects version 2 migration problem that caused error with the Harbinger (HB) 

communications network. 

59432 Prevents errors when importing a large number of translation formats. 

59612 Allows http port override for XML display in Transaction Center. 

59886 Corrects problem of selecting add to hash on an element in an element set and only 

the element in the first set is selected. 

59979 Corrects problem with SAP module where an instance is not found during an 

outbound process. 

60198 Prevents looping problem with BX network module. 

60322 Corrects problem when math is done in a send translation format and there is no 

value in the first source. 

60349 Corrects possible data decimal error problem when importing UFD with user links 

attached. 

60376 Corrects problem of distribution list mailboxes erroneously auto deleting when 

sent. 

60540 Adds new CHGNETSTS command to change status of all Trading Partner 

Relationships for a given network acronym. 

26 Release Notes


Request # 

Description 

60652 Corrects problem when a retranslate of a send document performs the Add to 

Mailbox User Exit program. 

60776 Corrects miscellaneous problems with the EX network module. 

60948 Corrects problem of Communications Session Exception report print errors. 

61256 Prevents inactive maps from being compiled. 

61285 Prevents orphaned active condition records when map conditions are deleted. 

61339 Prevents maps and/or UFDs from being lost. 

61482 Corrects problem for outbound VDA documents using the 

AT & T network module get a hex 41 character appended to end of the message. 

61625 Corrects problem where a receive element set multiple does not create records. 

61893 Corrects problem that occurs when a segment terminator is preceded by one or 

more release characters at the end of the communications record. 

61895 Corrects error that occurs on receive when using performance, and the segment 

length is 134 characters. 

62362 Improves ASCII - EBCDIC translation for the Cyclone Commerce (CC), IBM FTP 

(IF), and BizManager Interface (BZ) network modules. 

62387 Eliminates the IBM Java toolbox compile from product update. 

63230 Corrects problem on the IBM EX expEDIte Base/400 network module that occurs 

when a large amount of data is received. 

63303 Corrects problem on the IBM EX expEDIte Base/40 network module that occurs 

when a large amount of data is sent. 

63802 Correct problem where e-mails are not always generated through Commerce 

Workflow. 

63853 Corrects import problem that occurs when a fixed value is in the import file record 

and a field value is in the existing UFD record. 

63914 Correct Scripted FTP module problem inserting carriage return line feed characters. 

63946 Corrects problem where not all documents in an interchange go to C/E when there 

are no group envelopes. 

63983 Corrects problem retranslating send document when user file data exceeds 16 MB. 

64102 Corrects problem with external tables when using numeric cross reference fields. 

64163 Includes sender and receiver routing addresses in the UCI segment of outbound 

CONTRL messages if present in the inbound UNB. 

64197 Enhances the BizManager Interface and Cyclone Commerce network modules to 

optionally append a suffix to each file sent. 

64217 Corrects problem in Scripted FTP where !Delete_Get doesn’t work when the 

received files are less than 133 bytes. 


File changes included in V6.1: 

■ 

■ 

■ 

■ 

EDPARTL2 

EDMAST38 

EDMASTLA 

EDMPFHPF 

Release Notes 27


28 Release Notes

Download

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?