Laboratory & Field Instruments: Meters & Probes - ECA Service

Laboratory & Field 

Instruments: 

Meters & Probes 


See Inside! 

• NEW! Hach LBOD IntelliCAL probe 

with breakthrough LDO ® technology! 

See page 35. 

• Rugged and Standard IntelliCAL 

probes for measuring: 

– pH 

– DO 

– NEW! BOD 

– Conductivity 

– Temperature 

See pages 34-35. 

• NEW! Rugged Field Kits and 

Application Kits! 


• HQd meters: One meter— 

choose your measurement! 

See page 36-37. 

• NEW! All-in-one pH buffer kits! 

See page 50.

HQd Meters & IntelliCAL Probes 


IntelliCAL probes for pH, Conductivity, Dissolved Oxygen, BOD, 

and Temperature—only from Hach. 

STANDARD PROBE FOR LABORATORY USE 

Quickly identify 

probes with 

color-coded bands 

RUGGED PROBE FOR FIELD USE 

Polymer shroud 

protects sensor 

from impact 

Easily track 

measurements— 

“intelligent” probes 

store calibration info 

and serial numbers 

See pages 34-35 for complete listing of IntelliCAL probes. 

A Breakthrough in BOD Measurement! 

NEW Hach LBOD IntelliCAL probe uses patented LDO ® 

technology to deliver superior confidence in results! 

All the same great benefits of the Hach LDO probe, 

with the built-in features to measure BOD! 

• No membranes to replace. 

• Calibration in less than one minute. 

• Reliable performance and accurate readings time after time. 

• Have confidence in your results! 

No 

membranes 

means 

reliable 

results! 

Complete System available—Includes: 

• HQ40d Digital Meter. 

• LBOD Probe (Prod. No. LBOD10101). 

• Power and communication cables. 

• Laboratory meter stand. 

EPA Recommends 

Hach LDO ® Method 10360 

for use in compliance 

monitoring.* 

See page 35 

for complete BOD system. 

For use with 300 mL BOD bottles, 

Prod. No. 2943100. 

*Hach’s LDO technology has been approved in numerous states for measuring and reporting Dissolved Oxygen (DO) and BOD. Visit www.waterqualitymeters.com 

or speak with a Hach representative to learn if your state is approved. 

To learn more, go to: www.waterqualitymeters.com 

28 

800-227-4224 

Outside the United States, call 970-669-3050

HQd Meters & IntelliCAL Probes 

HQd Meters and 

IntelliCAL Probes: 

pH, Conductivity, Dissolved 

Oxygen (LDO), Biochemical 

Oxygen Demand (LBOD), 

and Temperature. 

Use a single handheld HQd meter and 

interchangeable IntelliCAL probes for quick, 

simple, and reliable measurements. 

• Versatile—Get the probes you need now, expand or 

switch out parameters later. Take up to 2 

simultaneous measurements with the HQ40d. 

• Time savings—IntelliCAL probes store calibration 

history, making change outs simple and fast. 

• Reliable results—Accuracy ensured with automatic 

probe and parameter recognition, check standard 

routines and calibration reminders. 

• Flexible and durable—IntelliCAL probes available in 

standard and rugged versions in multiple cable 

lengths. Ideal for lab and field applications, even 

harsh environments. 

• Innovative technology—Patented breakthrough Hach 

LDO ® luminescent dissolved oxygen technology 

eliminates membranes for low maintenance. 

Secure waterproof 

connections and 

color-coded clips 

All the information 

you need on 

one screen 

(backlit for low 

light conditions) 

Meters record probe 

serial numbers, 

current calibration 

data, user ID, sample 

ID, time, and date with 

every reading 

Easy-to-use, 

menu-driven 

interface 

Great for field use— 

200+ hours of 

battery life 


“Calibration is easy, 

repeatability is very good, and we like the fact that 

it stores readings that can be tracked by operator 

and even be downloaded to a printer or PC.” 

Cindi Rutledge, Plant Operator 

Loveland, Colorado WWTP 

HQ40d Dual-Input, 

Multi-Parameter Digital Meter 


Find it here… Buy it today on www.hach.com 

U.S. customers only. 

29

Rugged Field Kits 


• Hach HQd pH, Conductivity, and LDO meters are now available in rugged field kits 

• Feature rugged probes available only from Hach 

• All required buffers and accessories for field measurement are organized securely 

in one durable case! 

Actual case may differ from photo. 

Rugged DO Field Kit 

• Rugged field kit for dissolved oxygen monitoring applications 

• Features the rugged Hach LDO probe for maximum durability in the field or plant 

• Case includes space to add an additional rugged probe 

• Rugged field case includes everything needed for measurement 

and calibration, organized securely in a durable, die-cut foam insert 

Prod. No. Description Price 

8505100 Rugged DO Field Kit $1,599.00 

Includes: Rugged case w/ durable foam insert for organization; 

HQ30d Meter; Rugged LDO Probe w/ 5 meter cable; Protective 

Glove for Meter; 250 mL Plastic Flask for calibration; 4 Containers 

for sample collection; DI Rinse Bottle; Box of Disposable Wipes; 

Waste Container; Operation Manual 

Rugged DO Field Kit w/ HQ40d Multi Meter 

• Same rugged kit and components as HQ30d kit above, but includes the 

HQ40d multi meter 

• HQ40d meter enables simultaneous, two parameter measurement 

• Includes USB/Power Adapter for data transfer and line power operation 



8505200 Rugged DO Field Kit w/ HQ40d Multi Meter $1,749.00 


HQ40d Meter with A/C Power and USB Adapters; Rugged LDO 

Probe w/ 5 meter cable; Protective Glove for Meter; 250 mL Plastic 

Flask for calibration; 4 Containers for sample collection; DI Rinse 

Bottle; Box of Disposable Wipes; Waste Container; Operation Manual 

Rugged DO/pH Field Kit 

• Measure DO and pH in the field or plant with one rugged kit! 

• Feature stainless steel rugged probes and multi-parameter meter, 

only available from Hach 

• pH calibration buffers included for maximum portability, organized securely 

in a durable, die-cut foam insert 



8505400 Rugged DO/pH Field Kit $2,299.00 



Probe w/ 5 meter cable; Rugged pH probe w/ 5 meter cable; 

pH Buffer Singlet Packs for Calibration; pH Storage Solution, 

50 mL; Protective Glove for Meter; 250 mL Plastic Flask for 

calibration; Containers for sample collection; DI Rinse Bottle; 

Box of Disposable Wipes; Waste Container; Operation Manual 


30 

800-227-4224 


Rugged Field Kits 

Advanced DO/pH/Conductivity 

Rugged Field Kit 

• The all-in-one rugged kit for complete water quality analysis 

• Measure pH, conductivity, or dissolved oxygen wherever required— 

in the plant or field 

• Rugged field case includes everything needed for measurement 

and calibration, organized securely in a durable, die-cut foam insert 



8505300 Advanced DO/pH/Conductivity Rugged Field Kit $2,899.00 



Probe w/ 5 meter cable; Rugged pH probe w/ 5 meter cable; 

Rugged Conductivity Probe w/ 5 meter cable; pH Buffer Singlet 

Packs for Calibration; pH Storage Solution, 50 mL; Conductivity 

Standard, Singlet Packs, 1000 µS/cm; Protective Glove for Meter; 

250 mL Plastic Flask for calibration; DI Rinse Bottle; Box of 

Disposable Wipes; Waste Container; Operation Manual 


Rugged Field Cases 

• Now available for your existing meters and probes 

• Rugged field cases include sample collection containers and space 

for meter and rugged probes 

• Durable, die-cut foam inserts hold meter and probes securely in place 


8505500 Rugged Field Case for two probes with up to 10 m cables $199.00 

Includes: Empty case and insert for meter and probe storage; 

(4) Containers for sample collection 

8505501 Rugged Field Case for three probes with up to 10 m cables 249.00 

Includes same accessories as case 8505500. 

8505600 Rugged Field Case for probes with 30 m cables 169.00 

Includes: Empty case and insert for meter and probe storage; 

space for storage of HQd meter with protective glove 


Greater confidence in results. 

“We liked our Hach LDO meter—it was a significant improvement over the 

membrane-type unit we had been using. But when I took the HQ40d meter out in the 

plant and tested it against the LDO meter, I could run five tests with it in the same time 

it took me to perform only one with the other unit. It locks in very quickly. Also, a calibration 

system alerts the user to when recalibration is needed. This, combined with the faster 

response time, gave us increased confidence in our results.” 

Cindi Rutledge, Plant Operator 

Loveland, Colorado WWTP 




31

HQd & IntelliCAL Starter Kits 


• HQd meters and IntelliCAL probes now available in popular packaged configurations 

• Choose from basic starter kits or complete packages for your facility 

• Include buffers, standards, and accessories for quick ordering and simple start up 

NEW! BOD Measurement System 

• NEW only from Hach: Complete BOD measurement system featuring the 

LDO advantage 

• Calibration in less than one minute 

• No membranes to replace 


8505700 BOD Measurement System $1,749.00 

Includes: HQ40d Meter with A/C Power and USB Adapters; 

LBOD Probe; HQd Meter Stand; Disposable BOD Bottles (117/case); 

Acrylic Stoppers (25); BOD Bottle Caps (2 packages of 6) 

Also available without bottles and caps—see page 35 for meter 

and probe system (Prod. No. HQDBOD01) 

For available BOD chemistries, see page 133. 

pH Starter Kit 

• Complete starter kit featuring HQ11d Meter and Standard IntelliCAL Gel pH probe 

• Includes pH calibration buffers for quick ordering and start up 

• Features the new IntelliCAL probe stand for measurement and probe storage 


8505900 pH Starter Kit $769.00 

Includes: HQ11d pH Meter; Gel pH Probe w/ 1 meter cable; 

HQd Meter Stand; pH Buffer Kit, 500 mL; pH Storage Solution, 

500 mL; Probe Stand 

Conductivity Starter Kit 

• Complete starter kit featuring HQ14d Meter and Standard IntelliCAL Conductivity probe 

• Includes Conductivity Standard Solution for quick ordering and start up 

• Features the new IntelliCAL probe stand for measurement and probe storage 


8506100 Conductivity Starter Kit $769.00 

Includes: HQ14d Conductivity Meter; Standard Conductivity 

Probe w/ 1 meter cable; HQd Meter Stand; Conductivity Standard, 

1000 µS/cm, 100 mL; Probe Stand 

Basic Dissolved Oxygen Package 

• Complete starter kit featuring the HQ30d Meter and Standard IntelliCAL LDO probe 

• Includes bottle and for simple calibration setup 

• Make your system portable by ordering Rugged Field Case, Prod. No. 8505500 


8506300 Basic Dissolved Oxygen Package $1,229.00 

Includes: HQ30d Meter; Standard LDO Probe w/ 1 meter cable; 

Disposable BOD bottle and stopper for calibration; 

HQd Meter Stand 

32 

800-227-4224 


HQd & IntelliCAL Advanced Packages 

Advanced pH/Conductivity Package 

• Complete measurement package for pH and conductivity— 

great for drinking water labs 

• Includes HQd meter stand and IntelliCAL probe stand for benchtop measurement 

• Includes calibration buffers and standards for quick ordering and start up 


8505800 Advanced pH/Conductivity Package $1,399.00 


Refillable pH Probe w/ 1 meter cable; Conductivity Probe w/ 1 meter 

cable; HQd Meter Stand; pH Buffer Kit, 500 mL; pH Storage Solution, 

500 mL; Conductivity Standard, 1000 µS/cm, 100 mL; Probe Stand 

Complete Water Quality Lab Package: 

DO/pH/Conductivity 

• Complete water quality measurement package for any lab type 

• Includes HQd meter stand and IntelliCAL probe stand for benchtop measurement 




8506000 Complete Water Quality Lab Package: DO/pH/Conductivity $1,949.00 


Refillable pH Probe w/ 1 meter cable; Conductivity Probe w/ 1 meter 

cable; Standard LDO Probe w/ 1 meter cable; HQd Meter Stand; 

pH Buffer Kit, 500 mL; pH Storage Solution, 500 mL; Conductivity 

Standard, 1000 µS/cm, 100 mL; Disposable BOD bottle and stopper 

for calibration; Probe Stand 

Advanced pH/BOD Package 

• Complete measurement package for pH and BOD - great for wastewater labs 

• Includes NEW Hach LBOD IntelliCAL probe and HQd meter stand for 

benchtop measurement 


• Order BOD chemistries and solutions separately 


8506200 Advanced pH/BOD Package $2,129.00 


Refillable pH Probe w/ 1 meter cable; LBOD Probe; HQd Meter Stand; 

pH Buffer Kit, 500 mL; pH Storage Solution, 500 mL; Disposable BOD 

Bottles (117/case); Acrylic Stoppers (25); Probe Stand; BOD Bottle Caps 

(2 packages of 6) 

For available BOD chemistries, see page 133. 

Minimize errors with 

data-logging and data transfer. 

“With our previous pH meter and our galvanic-type DO meter, we did not have 

the capability to electronically store data. Because we’ll now be able to store data 

and download it straight to our computer, we won’t have to write numbers 

down by hand and key them in later. This will eliminate the potential 

for transcription errors.” 

Eric Kingsley, Water Quality Specialist 

Monterey Bay Aquarium 



33

IntelliCAL Probes 


Sensor type Range Slope Temp. Range Dimensions Interferences Prod. No. Description Price 

IntelliCAL pH Probe – Standard 

Glass membrane 2-14 pH 59 mV/pH unit at 25ºC -10.0 to 110.0°C 7"(17.8 cm) Na + above pH 12 pHC10101 Electrode only (1 m cable) $165.00 

0 to 80°C for 0.02 lbs (9.1 g) pHC10103 Electrode only (3 m cable) 195.00 

continuous use 

IntelliCAL pH Probe – Rugged 

Glass membrane 2-14 pH 59 mV/pH unit at 25ºC -10.0 to 110.0°C 8.5" (21.6 cm) Na + above pH 12 pHC10105 Electrode only (5 m cable) 475.00 


continuous use pHC10115 Electrode only (15 m cable) 565.00 

pHC10130 Electrode only (30 m cable) 625.00 

IntelliCAL pH Probe – Standard Refillable 

Glass membrane 0-14 pH 59 mV/pH unit at 25ºC -10.0 to 110.0°C 7" (17.8 cm) Na + above pH 12 pHC30101 Electrode only (1 m cable) 195.00 


continuous use 

IntelliCAL Conductivity Probe – Standard 

Graphite 4-pole 0.01 µS/cm to N/A -10.0 to 110.0°C 7" (17.8 cm) N/A CDC40101 Electrode only (1 m cable) 275.00 

200 mS/cm 0.02 lbs (9.1 g) CDC40103 Electrode only (3 m cable) 305.00 

Resistivity: 

2.5 ohm.cm to 

49 Mohm.cm 

Salinity: 

0-42 g/kg (ppt) 

TDS: 

0.0-50,000 mg/L 

IntelliCAL Conductivity Probe – Rugged 

Graphite 4-pole 0.01 µS/cm to N/A -10.0 to 110.0°C 8.5" (21.6 cm) N/A CDC40105 Electrode only (5 m cable) 550.00 

200 mS/cm 1.26 lbs (0.57 g) CDC40110 Electrode only (10 m cable) 610.00 

Resistivity: CDC40115 Electrode only (15 m cable) 640.00 

2.5 ohm.cm to CDC40130 Electrode only (30 m cable) 700.00 

49 Mohm.cm 

Salinity: 

0-42 g/kg (ppt) 

TDS: 

0.1-50,000 mg/L 

All rugged probes are waterproof to 30 meters for 24 hours (IP68). Other probes are waterproof to 3 meters. 

Each probe is delivered with color-coded clips for easy identification. 


34 

800-227-4224 


IntelliCAL Probes 


IntelliCAL LDO Probe – Standard 

Luminescent 0.10 to 20 mg/L N/A 0 to 50 °C 7" (17.8 cm) Elevation limitation LDO10101 Electrode only (1 m cable) $550.00 

Dissolved Oxygen 0-200% 0.02 lbs (9.1 g) 5000 m (16,400 ft.), LDO10103 Electrode only (3 m cable) 580.00 

maximum 

IntelliCAL LDO Probe – Rugged 

Luminescent 0.00 to 20 mg/L N/A 0 to 50 °C 8.5" (21.6 cm) Elevation limitation LDO10105 Electrode only (5 m cable) 700.00 

Dissolved Oxygen 1-200% 1.26 lbs (0.57 g) 5000 m (16,400 ft.), LDO10110 Electrode only (10 m cable) 760.00 

maximum LDO10115 Electrode only (15 m cable) 790.00 

LDO10130 Electrode only (30 m cable) 850.00 


All rugged probes are waterproof to 30 meters for 24 hours (IP68). Other probes are waterproof to 3 meters. 

Each probe is delivered with color-coded clips for easy identification. 

BOD BREAKTHROUGH! NEW Hach LBOD IntelliCAL Probe 

Same benefits of Hach’s LDO probe, with built-in features to measure BOD! 

Probe Only 

Probe and Meter System 

Have confidence in your results! Perfect for use in 

EPA-based BOD testing in 300 mL BOD bottles in 

approved States. 

Product No. Cable Length Price 

LBOD10101 1.8 meter cable $775.00 

Includes an HQ40d Digital Meter, LBOD10101 

probe, power and communication cables, and a 

laboratory meter stand. 

Product No. 

Price 

HQDBOD01 $1,605.00 

For use with 300 mL BOD bottles, 

Prod. No. 2943100. 

See below. 

Hach’s BOD Solution 

Bottle, BOD, Disposable 

• Fresh bottle, ready for use 

• No cleaning required 

• Unbreakable and recyclable 

• Oxygen will not diffuse in or out of sample 

• EPA compliant 

Stopper sold separately. 

NO 

CLEANING 

REQUIRED! 

Prod. No. Description Unit Price 

2943100 Disposable 300 mL BOD Bottle 117/case $79.99 

2943900 Unbreakable Acrylic Stopper 25/pack 72.09 

for 300 mL BOD Bottle 

190901 Glass Stopper for 300 mL BOD Bottle each 5.79 

241906 Plastic Cap for BOD Bottles 6/pack 5.05 

BOD Reagents 

• Complete line of products for BOD preparation 

• Prepackaged nutrient buffer 

• Convenient, easy to use, pre-measured products 


253335 Nitrification inhibitor - 35 g, 200 tests $16.09 

253334 Nitrification Inhibitor - 500 g, 2500 tests 126.00 

2845425 ATU (1-1-allyl-2-thiourea), 50 g 54.60 

(Nitrification Inhibitor for CBOD Determination) 

2918700 BOD Seed Inoculum, 50 capsules, PolySeed ® 111.00 

1416066 Nutrient Buffer Pillows, 0.5-mL size for 300 mL, 50/pk 8.05 

1486166 Nutrient Buffer Pillows, 3-mL size for 3 liters, 50/pk 26.25 




For more BOD Reagents and BOD Standards, see page 133 of the 

Parameters Section. 




35

HQ40d Dual-Input Multi-Parameter Meter 


Plug-and-Play with any 

Two IntelliCAL Probes! 

• Lighten your load with a single meter to measure either pH, conductivity 

(salinity, TDS, resistivity), temperature, or dissolved oxygen (LDO ® ) simultaneously 

• Calibration history stored in IntelliCAL probe allows quick and easy change out 

of probes without re-calibration 

• 500-record datalog stores measurements, calibrations, check standards, 

user ID, sample ID, and time and date stamp 

• Includes USB/DC power adapter 

HQ40d Meter Only 

Product Number Description Price 

HQ40d53000000 HQ40d Dual-Input, Multi-Parameter Digital Meter $800.00 

Order meter and probes together, online at: www.hach.com/config 

Probe Stability 

Indicator 

View Readings from 

Two Probes on 

One Screen 

Battery Life 

Remaining 

Calibration 

Status 

Sample 

and 

User ID 

Additional 

Units 

Displayed 

Time 

and 

Date 

The Hach HQ40d features 

three connection ports: 

2 ports that allow simultaneous 

measurement of two different 

parameters using two different 

probes, and 1 port 

for USB and external power. 


36 

800-227-4224 


HQ30d Single-Input Multi-Parameter Meter 

Plug-and-Play with any 

One IntelliCAL Probe! 

• Lighten your load with a single meter to measure either pH, conductivity 

(salinity, TDS, resistivity), temperature, or dissolved oxygen (LDO ® ) simultaneously 

• Calibration history stored in IntelliCAL probe allows quick and easy change out 

of probes without re-calibration 

• 500-record datalog stores measurements, calibrations, check standards, 

user ID and sample ID with time and date stamp 

HQ30d Meter Only 



HQ30d53000000 HQ30d Single-Input, Multi-Parameter Digital Meter $650.00 


The HQ30d features one probe 

port for use with any of Hach’s 

IntelliCAL probes and one port 

for external power. 

Need hands-free operation New meter stand 

available for all HQd meters—see meter 

accessories on pages 38-39. 

Dedicated pH and Conductivity Meters 

• HQ11d pH Meter allows you to measure pH, mV, and temperature with any 

standard or rugged pH IntelliCAL probe 

• HQ14d Conductivity Meter allows you to measure conductivity, resistivity, salinity 

or TDS with any standard or rugged conductivity IntelliCAL probe 

HQ11d pH Meter and HQ14d Conductivity Meter 


HQ11d53000000 HQ11d Digital pH Meter $400.00 

HQ14d53000000 HQ14d Digital Conductivity Meter 400.00 


Single Parameter Meters 




37

HQd Meter & Probe Accessories 


Meter Stand 

Custom-fit for all HQd meters, the Meter 

Stand is perfect for use in the laboratory 

or other applications where hands-free 

meter operation is desired. Black molded 

plastic is durable and easy to clean. 

For use with all HQd meters (without 

protective glove). 

Prod. No. Price 

4754900 $30.00 

Protective Glove 

The durable polymer construction of 

this protective glove provides your 

meter with the added impact protection 

that field use requires. Wrist and neck 

straps keep the meter secure. Two 

standard probe holders (not included in 

kit) can be slid onto the protective glove 

for maximum versatility. 

Probe Stand for 

Hach IntelliCAL 

Probes 

Probe stand will hold up to 

three probes simultaneously 

for hands-free operation of 

HQd meter and IntelliCAL 

probe systems. Unique clip 

design allows for quick and 

easy removal of probes. 


8506600 $140.00 

Probe Holder 

(Standard Probes Only) 

Designed for use in conjunction with the 

Protective Glove, Probe Holders can be 

used to organize and store standard 

probes with 1- or 3-meter cables. 

Simply wrap cable around the holder 

and slide probe in protective sheath. 

Protective Glove can hold one 

or two Probe Holders. 


5829400 $16.15 


5828700 $26.10 

Color Coded Probe Clips 

Field Kit 

Includes protective glove, 

2 standard probe holders, 

and 5 120 mL sample 

cups. Carry your HQd 

system anywhere. Custom 

inserts organize and 

securely position your 

meter and probes. 

NOTE: Field Kit is 

included with HQ40d 

meter systems. 

Make identification or personalization of different probes easy by 

clipping a color-coded band to each end of your probe cable. Ten 

clips of five different colors per package. 

NOTE: One package of clips included with each probe. 


5825800 $99.00 

Probes and Meter not included. 


5818400 $9.75 

38 


800-227-4224 


HQd Meter & Probe Accessories 

Probe Cable Depth Markers 

Taking readings at specific 

depths with rugged probes is a 

snap with these Depth Markers. 

Visually identify the depth of 

your probe by attaching Depth 

Marker securely on cable at 

points to meet your needs. Five 

Depth Markers per package. 

NOTE: For use with rugged 

probes only. 


5828610 $26.70 

USB/DC Power Adapter 

Use to transfer data to PC, memory stick, or printer from the 

HQd meter. Must be used with the A/C Power Adapter, 

Prod. No. 5826300. 


5813400 $122.00 


Plastic cable depth markers snap on easily 

where your needs require. For use with rugged 

probes only. 

Replacement Shroud Kit for Rugged Probes 

Includes protective bell and locking ring. The rugged shroud absorbs 

the impact from rough wear and tear. 


5825900 $38.70 

Shroud Kit 

A/C Power Adapter 

For use with any meter, this adapter provides A/C power in the lab. 

NOTE: Meter will remain water-proof after using the 

A/C power adapter. 


5826300 $47.60 

Keyboard 


LZV582 $184.00 

Printer 

Probe not included. 


5835800 Citizen ® PD-24 Handy Printer, 120V $562.00 

5835900 Citizen ® PD-24 Handy Printer, 220V 562.00 

5836000 Printer Paper for PD-24, Thermal 5/pk 31.00 

Replacement LDO Sensor Cap 

Includes i-button and sensor cap. 


5811200 $80.00 




39

sensION Meters 


pH sensION Meters 

Basic Portable and Benchtop pH Meters 

• 1, 2, or 3 point calibration 

• Resolution to 0.1, 0.01, and 0.001, for the right accuracy when you need it 

• Fast response to changes in pH; true pH averaging 

• sensION3 features RS232 communication to PC or printer 

• sensION1 is waterproof (IP67) and floats 

Range 

(pH): -2.00 to 19.99 

mV: ±2000 

Temperature: -10 to 110°C 

(-50 to 230°F) 

Resolution 

(pH): 0.1; 0.01; 0.001 

(selectable) mV: 0.1 mV 

Temperature: 0.1°C 


5170010 sensION1 Portable pH Meter with Platinum pH electrode $455.00 

(replaceable cartridges) 

5170011 sensION1 Portable pH Meter with gel-filled electrode 429.00 

(disposable electrode) 

5175010 sensION3 Benchtop pH Meter with Platinum pH electrode, 115V 563.00 

5175011 sensION3 Benchtop pH Meter with Platinum pH electrode, 230V 563.00 

5175012 sensION3 Benchtop pH Meter with gel-filled electrode, 115V 563.00 

5175013 sensION3 Benchtop pH Meter with gel-filled electrode, 230V 563.00 

See pages 42-43 for replacement probes. 

See page 46 for sensION meter and probe accessories. 

Accuracy 

(pH): ±0.002 mV: ±0.2 mV or 

±0.1% of reading 

(whichever is greater) 

Temperature: ±0.3°C at -10 to 

70°C; ±1.0°C at 70 to 110°C 

pH / ISE sensION Meters 

Advanced Portable and Benchtop pH / ISE Meters 

• Automatic buffer recognition 

• Resolution to 0.1, 0.01 and 0.001, for the right accuracy when you need it 

• Measures/compensates temperature in °C or °F 

• sensION2 is waterproof (IP67) and floats 

• Recall/download/print data via built-in RS232 serial ports (sensION4) 

or via optional docking station (sensION2) 

• sensION4 features selectable two-channel operation 

Range 

(pH): -2.000 to 19.999 

Concentration: 0.000 to 19900 

mV: ±2000 

Temperature: -10 to 110°C 

(-50 to 230°F) 

Resolution 

(pH): 0.1; 0.01; 0.001 

(selectable) 

Concentration: 0.1; 0.01; 

0.001 (selectable) 

mV: 0.1 mV 

Temperature: 0.1°C 

Accuracy 

(pH): ±0.002 

Concentration: ±0.5% of reading 

mV: ±0.2 mV or ±0.05% of 

reading (whichever is greater) 


70°C; ±1.0°C at 70 to 110°C 


5172510 sensION2 Portable pH/ISE Meter $590.60 

with Platinum pH electrode 

5177510 sensION4 Benchtop pH/ISE Meter 952.00 

with Platinum pH electrode 115V 

5177511 sensION4 Benchtop pH/ISE Meter 952.00 

with Platinum pH electrode 230V 

See pages 42-45 for replacement probes. 


40 

To view the complete portfolio of sensION meters, 

including multi-parameter meters, visit www.hach.com. 

800-227-4224 


sensION Meters 

Dissolved Oxygen sensION Meters 

Portable and Benchtop Dissolved Oxygen Meters 

• Quick calibration 

• All-in-one 5-pin connector 

• Stable resolution to 0.1, 0.01 mg/L; 0.1% saturation 

• Recall/download/print data via built-in RS232 serial ports (sensION8) or via 

optional docking station (sensION6) 

• Dissolved Oxygen measurement using polarographic technology (Clark cell) 

Range 

Dissolved Oxygen: 

0-20 mg/L (ppm); 

0-200% saturation 

Temperature: 

0-50°C 

Resolution 


0.01 or 0.1 ppm (mg/L); 

0.1% saturation 

Temperature: 

0.1°C 

Accuracy 


±1% full scale 

Temperature: 

±0.3°C at -10 to 70°C; 

±1.0°C at 70 to 110°C 



5185010 sensION6 Dissolved Oxygen Meter $693.00 

with 3 m probe 

5455010 sensION8 Benchtop Dissolved Oxygen Meter 997.50 

with electrode, 1-meter (40") cable, 115 V 

5455011 sensION8 Benchtop Dissolved Oxygen Meter 1,050.00 


See page 43 for replacement probes. 


Conductivity sensION Meters 

Portable and Benchtop Conductivity Meters 

• Fast response 

• Quick single-point calibration 

• All-in-one 5-pin connector 

• Recall/download/print data via built-in RS232 serial ports (sensION5) or via 

optional docking station (sensION7) 

Range 

Conductivity: 0 to 199.9 µS/cm; 

200 to 1999 µS/cm; 

2 to 19.99 mS/cm; 

20 to 199.9 mS/cm 

TDS: 0 to 50,000 mg/L as NaCl 

Salinity: 0 to 42 g/L (ppt) 

Temperature: -10.0 to 110.0°C 

Resolution 

Conductivity: 0.1 µS; 1µS; 

0.01 mS; 0.1 mS 

TDS: 3 significant digits 

Salinity: 0.1 g/L (ppt) 

Temperature: ±0.1°C 

Accuracy 

Conductivity:±0.5% of range 

TDS: ±0.5% of full scale 

Salinity: ±0.1 ppt (-2 to 35°C) 


70°C; ±1.0°C at 70 to 110°C 


5180010 sensION5 Conductivity Meter $546.00 

with electrode 1-meter (40") cable 

5450010 sensION7 Benchtop Conductivity Meter 892.50 


5450011 sensION7 Benchtop Conductivity Meter 945.00 


See page 43 for replacement probes. 


To view the complete portfolio of sensION meters, 

including multi-parameter meters, visit www.hach.com. 



41

sensION Probes and Electrodes 



51910 Platinum Series pH Combination (with temperature) 

Glass Membrane pH: 0 to 14 58 (±3) Continuous Use: Diameter: Na + ELECTRODE ONLY 

mV/decade 0 to 45°C 12.7 mm (0.50”) above pH 12 5191000 pH Platinum Series $233.00 

(32 to 113°F) Total Length: Combination Electrode 

Occasional Use: 241 mm (9.5”) (use with sensION Meters) 

0 to 100°C Features 5-pin connector. 

(32 to 212°F) Includes two electrolyte cartridges 

and a manual. 

5191022 With BNC and DIN connectors. 216.00 

5191011 With BNC and 3.5 mm 216.00 

phone connectors 

ELECTRODE ACCESSORIES 

2546902 Potassium Chloride Electrolyte 10.65 

Cartridge, pk/2 

2657364 pH Storage Solution Powder 23.80 

Pillows, pk/20 

2756549 pH Electrode Storage Solution, 24.60 

500 mL 

2299264 Buffer Powder Pillows, pH 4.0 9.80 

and 7.0, pk/20 

5189900 Low Ionic Strength Chamber 75.00 

5192900 Soaker Bottle 3.80 

51915 Platinum Series pH Combination Flat-End 


mV/decade 0 to 45°C 12.7 mm (0.50”) above pH 12 5191500 pH Platinum Series 265.00 

(32 to 113°F) Total Length: Combination Flat End Electrode 

Occasional Use: 229 mm (9.0”) (use with ALL Hach meters) 

0 to 80°C Features BNC connector. Includes 

(32 to 176°F) two electrolyte cartridges and a 

manual 


2546902 Potassium Chloride Electrolyte 10.65 





500 mL 

5189900 Low Ionic Strength Chamber 75.00 


51935 pH Combination (with temperature) 


mV/decade 0 to 45°C 12.1 mm (0.475”) above pH 12 5193500 pH Gel-Filled Combination 143.00 

at 25°C (32 to 113°F) Total Length: Electrode (use with sensION 

Occasional Use: 152.5 mm (6”) Meters) Features 5-pin connector. 

0 to 100°C Includes a manual. 

(32 to 212°F) 5193522 With BNC and DIN connectors. 133.00 

5193511 With BNC and 3.5 mm 133.00 

phone connectors. 





500 mL 


42 

800-227-4224 




51940 Refillable pH Combination Electrode (with temperature) 

Glass Membrane pH: 0 to14 58 (±3) Continuous Use: Diameter: Na+ ELECTRODE ONLY 

mV/decade 0 to 45°C 12.1 mm (0.475”) above pH 12 5194000 Refillable Combination Electrode $155.00 

at 25°C (32 to 113°F) Total Length: (use with sensION Meters) 

Occasional Use: 152.5 mm (6”) Features 5-pin connector. 

0 to 100°C Includes a manual. 

(32 to 212°F) 5194022 With BNC and DIN connectors. 155.00 

5194011 With BNC and 3.5 mm 155.00 

phone connectors. 


5194100 Filling Solution, 65 mL 9.15 




500 mL 



51975 Conductivity Probe 

Graphite 4-Pole 0.1 µS-200 mS N/A -10 to 110°C 120 x 15 mm N/A PROBE ONLY 

0.45 (cm-1) (4.8 x 0.6") 5197500 Conductivity Probe with 5-Pin 279.00 

cell constant 

circular connector. (1 m Cable) 

5197503 Conductivity Probe with 5-Pin 300.00 

circular connector. (3 m Cable) 


2307542 180 µS/cm, 85.47 mg/L TDS, 10.40 

100 mL 

1440042 1,000 µS/cm, 491 mg/L TDS, 12.05 

100 mL 

210542 1,990 µS/cm, 1,000 mg/L TDS, 10.70 

100 mL 

2307442 18,000 µS/cm, 10,246 mg/L TDS, 10.50 

100 mL 

2714349 53,000 µS/cm, 35.0 ppt salinity, 29.05 

500 mL 

51970 Dissolved Oxygen Probe 

Clark-Type 0 to 20 mg/L N/A 0 to 50°C 149 x 12.1 mm N/A PROBE ONLY 

Polarographic or 0 to 200% (6 x 0.475"} 5197000 Dissolved Oxygen Probe with 419.00 

saturation 

5-Pin circular connector. 

(1 m Cable) 

5197003 Dissolved Oxygen Probe with 441.00 


(3 m Cable) 

5197015 Dissolved Oxygen Probe with 464.00 


(15 m Cable) 


5197100 BOD Accessories Kit, with funnel 90.00 

and spacer for D.O. Probe Model 

51970-00 

5196800 D.O. Probe Service Kit, with two 61.00 

membranes, electrolyte filling 

solution and cloth 

5197300 Membranes for D.O. Probe, pk/2 56.00 

2759126 Electrolyte Filling Solution, 50 mL 10.90 

51980 Temperature Probe 

Thermistor N/A N/A 0 to 80°C 120 x 6 mm N/A PROBE ONLY 

(4.8 x 0.25") 5198000 Temperature Probe 82.75 

(sensION Meter) with 5-pin connector. 

5198022 Temperature Probe 102.00 

(EC Meter) with DIN Connector 

5198011 Temperature Probe 111.00 

(Hach One Meter) with 3.5 mm 

phone connector 



43




51928 Fluoride Combination 

Crystal 0.02 mg/L -58 (±3) 0 to 80°C 110 x 12 mm OH– ELECTRODE ONLY 

Membrane to saturated mV/decade (4.4 x 0.5") 5192800 Fluoride Combination Electrode $326.00 

(1 x 10-6 M to with electrolyte gel cartridges 

saturated) 

and manual. With BNC connector. 

range: 5 to 9 

ANALYSIS PACKAGE 

5192810 Fluoride Analysis Package 414.00 

–Combination (Includes electrode 

and following items, also available 

separately) 

2546902 Potassium Chloride Reference 10.65 


29149 Fluoride Standard Solution, 14.95 

1.0 mg/L, 500 mL 

35949 Fluoride Standard Solution, 22.39 

10 mg/L 500 mL 

258999 Fluoride ISA Powder Pillows, pk/100 39.75 

108041 Beaker, 50 mL 2.79 

5192888 Manual 22.40 

51920 Nitrate Combination 

PVC 0.5 mg/L -58 (±3) 10 to 30°C 244 x 12.7 mm ClO – 4 , I – , Br – , ELECTRODE ONLY 

Membrane (3.5 x 10 -6 N) mV/decade (9.6 x 0.5") NO – 2 , Cl – , 5192000 Nitrate Platinum Series 386.00 

to 14,000 mg/L in the linear HCO – 3 , CO 2– 

3 Combination Electrode 

(1 N) NO - 3 -N range with two electrolyte cartridges, 

as N Sample (>4 mg/L six nitrate membrane modules, 

pH range: NO - 3 -N) fill solution and a manual. 

3 to 11 With BNC connector. 


2348800 Nitrate Analysis Package 453.00 

-Combination (Includes electrode 


separately) 

2597102 Ammonium Sulfate Reference 10.65 

Cartridges, pk/2 

4456926 Nitrate Internal Filling Solution, 10.50 

50 mL 

4613300 Replacement Membrane Module, 40.20 

pk/6 

30749 Nitrate Nitrogen Standard, 13.29 

10 mg/L, 500 mL 

194749 Nitrate Nitrogen Standard, 15.95 

100 mg/L, 500 mL 

4456369 Nitrate ISA Powder Pillows, 39.00 

pk/100 

108041 Beaker, 50 mL 2.79 

5192088 Manual 24.00 

51937 ORP 

Platinum Wire mV range of N/A Continuous Use: Diameter: N/A ELECTRODE ONLY 

meter used 0 to 45°C 12.7 mm (0.50") 5193700 ORP Combination Electrode 193.00 

(32 to 113°F) Total Length: with electrolyte gel cartridges and 

Occasional Use: 241 mm (9.5") a manual. With 5-pin connector. 

0 to 100°C ANALYSIS PACKAGE NOT AVAILABLE 

(32 to 212°F) 

44 

800-227-4224 




51939 ORP 

Platinum Wire mV range of N/A Continuous Use: Diameter: N/A ELECTRODE ONLY 

meter used 0 to 45°C 12.7 mm (0.50"} 5193900 ORP Gel-filled Combination $193.00 

(32 to 113°F) Total Length: Electrode with ready-to-use filling 

Occasional Use: 241 mm (9.5") solution and a manual. With 5-pin 

0 to 100°C connector. 

(32 to 212°F) ANALYSIS PACKAGE NOT AVAILABLE 

51925 Sodium Combination 

Glass Membrane 0.010 mg/L +58 (±3) Continuous use: 240 mm x 12 mm Ag + , H + , ELECTRODE ONLY 

Na + to mV/decade 0 to 50°C; (9.4 x 0.5"} K + , NH + 

4 5192500 Sodium Platinum Series 381.00 

saturated in the linear Intermittent use: Combination Electrode with two 

solution range 0 to 80°C electrolyte cartridges and a manual. 

(>2 mg/L Na) With BNC connector. 


2348100 Sodium Analysis Package 453.00 



separately) 

2595802 Ammonium Chloride Reference 10.65 

Cartridge (pk/2) 

2318153 Sodium Standard, 100 mg/L, 23.00 

1000 mL 

1474949 Sodium Standard, 1000 mg/L, 20.75 

500 mL 

4451569 Sodium ISA Powder Pillows, 22.25 

pk/100 

18201H Sodium Chloride, ACS, 454 g 17.80 

108041 Beaker, 50 mL 2.79 

5192588 Manual 19.90 


51927 Ammonia Combination 

Gas sensing 0.06 to -58 (±3) 0 to 50°C 149 x 12 mm Volatile Amines ELECTRODE ONLY 

17,000 mg/L mV/decade (6 0.5") 5192700 Ammonia Combination Electrode 359.00 

as NH 3 

with three ammonia membrane 

0.05 to modules, electrode filling solution, 

14,000 mg/L and a manual. With BNC connector. 

as NH3-N 5025300 Air Gap Assembly recommended. 165.00 

pH range: > 11 

Sold separately. 


2348700 Ammonia Analysis Package 441.00 



separately) 

4447226 Electrode Filling Solution, 50 mL 8.50 

5192711 Replacement Membranes, pk/5 101.00 

15349 Ammonia Nitrogen Standard, 16.65 

10 mg/L, 500 mL 

2406549 Ammonia Nitrogen Standard, 16.39 

100 mg/L, 500 mL 

4447169 Ammonia ISA Powder Pillows, 21.25 

pk/100 

2541259 Electrode Storage Solution, 50 mL 7.75 

108041 Beaker, 50 mL 2.79 



45

sensION Accessories 


Low-Ionic-Strength (LIS) 

Sample Chamber 

Product No. 5189900 

Electrode Washer 


Electrode stands come with 

and without stirrers 

Product No. 45300XX 

Docking Station 

Product No. 51875XX 

Probe Holder 


Kyoline Brand Thermal Printer 

Product No. A70P021 

(Pen shown for scale.) 


5197100 BOD Accessory Kit $90.00 

5189900 LIS Sample Chamber 75.00 

2089400 Electrode Rack 47.75 

2089500 Electrode Support Clamp 42.55 

2615700 Electrode Holder, Flexible Arm 64.89 

2089300 Electrode Holder, Universal 104.00 

4531500 Extra Stir Bar 5.05 

2704700 Electrode Washer 86.45 

5187501 Docking Stations 115V 116.00 

5187502 Docking Stations 230V 116.00 

4812900 Computer Serial Cable 64.39 

5467100 Probe Holder 51.00 


4530000 Electrode Stand $75.25 

4530001 Electrode Stand with Stirrer 115V 243.00 

5192900 Soaker Bottle for pH Electrode 3.80 

1938004 Replacement batteries, AA, pk/4 8.10 

5190400 Soft-Sided Carrying Case 88.00 

5190300 Hard-Sided Carrying Case 93.00 

5191700 sensION156 Hard-Sided Carrying Case 61.00 

4966500 HachLink Software 424.00 

A70P021 Kyoline Brand Thermal Printer with cable, 115 V 282.00 

A70P025 Thermal Paper for Kyoline Printer, pk/10 rolls 74.20 

46 

800-227-4224 


Pocket Pal pH Testers 

Pocket-sized pH testers for quick, easy, accurate measurements. 

Applications 

• Plating 

• Water conditioning 

• Boiler/cooling water 

• Lakes and rivers 

• Food processing 

• Swimming pools and spas 

• Anywhere humidity levels are high 

Now IP67 rated* (dustproof and waterproof), Pocket Pal Testers are 

immune to harsh environments and accidental spills that could harm 

electronics. If accidentally immersed in water, the circuitry will remain 

unharmed. Pocket Pal Testers clip onto your shirt pocket, produce 

immediate results, and feature an easy-to-read liquid crystal display 

(LCD). While not recommended as a replacement for a pH or ORP 

instrument/electrode system, or a Hach Conductivity or TDS meter, 

Pocket Pal Testers offer a cost-effective alternative for routine, onthe-spot 

measurements. 

Temperature Pocket Pal Tester 

Range: -15 to 170°C 

The Temperature Pocket Pal Tester is an accurate, economical tester 

offering a wide range of measurement otherwise requiring two glass 

thermometers. 

pH Pocket Pal Tester 

Range: 0.0-14.0 pH Resolution: 0.1 pH Accuracy: ±0.2 pH 

The pH Pocket Pal Tester is ideal for quick, on-site pH testing. 

Applications include water quality testing at cooling towers, 

swimming pools and spas**. Hach color-coded, unit-dose pH buffer 

powder pillows, which ensure freshness and eliminate the possibility 

of contamination, and prepared pH buffer solutions are available in 

three pH values, 4.01, 7.00, or 10.00 (see pages 50-51). They are 

recommended for calibration adjustments. 

TDS Pocket Pal Tester 

Range: 10-1990 TDS 

IP67 rated (waterproof and dustproof). Ideal for quick TDS spot 

checks, this tester is not a replacement for a conductivity or TDS 

meter. Tester accuracy is ±2% at 25°C and accuracy can be ±10% 

of reading over the temperature measurement range. (For more 

accurate measurement, use the HQ14d, HQ30d, or HQ40d Meters, 

see pages 36-37.) Results are displayed digitally. Prepared sodium 

chloride solution is available and is required for calibration. 

Conductivity Pocket Pal Tester 

Range: 10-1990 µS/cm 

The Conductivity Pocket Pal Tester is ideal for swimming pools and 

drinking water control. Now IP67 rated. Rugged, dustproof and 

waterproof plastic body, and easy-to-read digital display make it 

perfect for on-site measurement. Other applications include water 

treatment (softener, demineralization, reverse osmosis, and drinking 

water), fish farming and aquariums, and pollution control. Prepared 

sodium chloride solution is available and is required for calibration. 

ORP Pocket Pal Tester 

Range: ±999 mV 

The ORP Pocket Pal Tester offers an accurate and affordable way of 

testing for redox potential. Because there are no chemical test kits or 

litmus paper for measuring this parameter, the ORP Pocket Pal Tester 

is a valuable tool, assuring accuracy, fast response, and excellent 

repeatability. The ORP Pocket Pal Tester is not IP67 rated. Lights 

solution is available to check electrode potential. 

*Only the Temperature, pH, TDS, and Conductivity Pocket Pal Testers 

are IP67 rated. 

**Testing in the presence of heavy metals or in liquids warmer than 50°C 

is not advised. 


4435001 pH Pocket Pal Tester $55.55 

4440001 TDS Pocket Pal Tester 61.45 

2686601 Conductivity Pocket Pal Tester 63.39 

2727300 ORP Pocket Pal Tester 84.79 

4445001 Temperature Pocket Pal Tester 54.19 

4445010 Replacement Temperature Probe 19.79 

2367800 Replacement batteries, 4/pk 10.59 

NOTE: Calibration solutions are not included with Pocket Pal testers. 


pH Testr 2 


pH TESTR 2, WATERPROOF 

2723500 pH Testr 2 $105.00 

2723501 Replacement electrode 50.29 

2749800 Replacement batteries 12.89 

pH TESTR 2, WATERPROOF, DOUBLE JUNCTION 

2799300 Double Junction pHTestr 2 105.00 

2799301 Replacement electrode 59.35 

2749800 Replacement batteries 12.89 

Microprocessor-based pH tester with Automatic Temperature 

Compensation. IP67 rated (waterproof and dustproof). 

One-, two-, and three-point push-button calibration, 

with ± 0.1 accuracy. 



47

pH Meters 


IQ120 and IQ125 Pocket pH Meters 

Model IQ125 miniLab is the Professional version, allowing for up to 

a three-point calibration. It comes with 6 mL dropper bottles of 

pH 4, 7, and 10 calibration buffers. 

Waterproof, pocket-sized pH meters 

with non-glass sensors. 

• Silicon chip non-glass pH sensor 

• Probe stores dry and needs no maintenance 

• 1-Point calibration on Model IQ120 

• 1-point, 2-point or 3-point calibration on Model IQ125 

• Automatic temperature compensation (ATC) 

• Fast response time 

• Over 200-hour life 

• Replaceable reference electrode 


2889600 IQ 125 miniLab pH Meter $240.00 

2889700 IQ 120 miniLab pH Meter 192.00 

2889800 IQ 125 Calibration Buffer Set 15.00 

2889900 IQ 120 Calibration Buffer Set 9.00 

2890000 IQ120-125 Reference Electrode Module 59.00 

IQ150 Portable pH Meter 

Portable pH meter with non-glass electrode. 

• Meter accepts both stainless steel probes with silicon chip 

sensors as well as any traditional glass sensor pH electrode 

with BNC connector 

• Probe stores dry and needs no maintenance. 

• Non-glass probe can be used in liquids, viscous samples, 

and semi-solids 

• Automatic or manual temperature compensation 

• One or two point calibration 


2814700 pH meter with stainless steel probe, $678.00 

silicon chip pH electrode, buffers, 

and a carrying case 

OPTIONAL PROBES 

2814800 Replacement stainless steel pH 285.00 

probe with silicon chip sensor 

8506700 Micro pH Probe w/Piercing Tip: 379.00 

Great for measuring pH in light piercing 

applications—in cheese, dough, or fish 

8506800 Heavy-duty Piercing Tip pH Probe: 399.00 

Used in meat industries. Heavy Duty handle 

simplifies tough piercing applications. 

8506900 Standard Micro pH Probe: 359.00 

Small diameter probe body enables pH 

measurement in test tubes, flasks, or anywhere 

small sample sizes must be measured 

The rugged pH system for use in the lab, field, or right on the 

production line. The stainless steel probe stores dry and requires no 

maintenance. Non-glass probe is excellent for applications where glass 

electrode breakage is a problem. Slanted tip is suitable for liquids, 

semi-solids, and even piercing applications. Silicon chip sensor 

cleans easily with a toothbrush and detergent. 

Micro pH Probe 

w/Piercing Tip 

Heavy-duty Piercing Tip 

pH Probe 

Standard 

Micro pH Probe 

48 

800-227-4224 


HSA–1000 Lead & Copper Analyzer 

Ensure the dissolved lead and copper concentration levels 

in your drinking water distribution system 

meet EPA standards with the 

Hach Scanning Analyzer 

HSA-1000. 


The portable HSA-1000 is an easy-to-use, accurate, cost-effective instrument for monitoring 

lead and copper concentrations. Using differential pulse anodic stripping voltammetry, a 

USEPA-approved methodology for determining total lead in drinking water that can also 

determine total copper*, the HSA-1000 makes monitoring easy. 

*The HSA-1000 method is approved by the USEPA only for determining lead concentrations, and acid 

digestion is required for reporting purposes. Hach Method 1001, Determination of Lead, for use in Lead 

and Copper Rule compliance monitoring. 

HSA-1000 

Parameter Lead Copper 

Calibration Pre-calibrated electrodes (HSE-Pb) Pre-calibrated electrodes (HSE-Cu) 

Analysis Time 3 minutes 3 minutes 

Range 2-100 µg/L 50-2000 µg/L 

Detection Limit 2 µg/L 50 µg/L 

Resolution 1 µg/L 1 µg/L 

Precision +/-5% CV at 15 µg/L +/-5% CV at 250 µg/L 

Operating Temperature 15-30°C 15-30°C 


5040000 HSA-1000 Analyzer for Lead and Copper $1,123.00 

Includes an instrument, a manual, a soft-sided carrying case, 

two electrode caps and test tube holders, and eight AA batteries. 

(Sensor Packs must be ordered separately.) 

5040100 Sensor Pack for Lead (10 tests) 103.00 

Includes 10 HSE-Pb scanning electrodes, 10 PrepTab PT-Pb 

sample preparation tablets, 10 sample tubes, and crushing rods. 

5040200 Sensor Pack for Copper (10 tests) 103.00 

Includes 10 HSE-Cu scanning electrodes, 10 PrepTab PT-Cu 

sample preparation tablets, 10 sample tubes, and crushing rods. 

Specifications* 

Internal Memory 

Stores up to 300 readings 

Display 

Intelligent 2 x 16 character alphanumeric 

Output Interface 

Output to printer or computer via RS-232 serial 

interface 

Power 

Uses eight AA 1.5v batteries, auto switch-off 

Size 

Instrument only, 170 x 130 x 55 mm 

*Subject to change without notice. 



49

pH Buffers and Standard Solutions 


Save when you purchase 

pH buffer 3-packs! 


20 L SIZE 3-PACK SAVE $97.35! 

2507300 Includes: $195.90 

2283661 10.01 (blue) NIST 

2283561 7.00 (yellow) NIST 

2283461 4.01 (red) NIST 

500 mL SIZE 3-PACK SAVE $7.70! 

2947600 Includes: 19.90 

2283649 10.01 (blue) NIST 

2283549 7.00 (yellow) NIST 

2283449 4.01 (red) NIST 

4 L SIZE 3-PACK SAVE $36.50! 

2507200 Includes: 73.00 

2283656 10.01 (blue) NIST 

2283556 7.00 (yellow) NIST 

2283456 4.01 (red) NIST 

pH Calibration Buffers 

Hach standard calibration buffers are available in convenient, unit-dose powder pillows or color-coded liquids. Powder pillows assure freshness 

and eliminate the possibility of contamination. Recommended for automatic calibration. Simply open the pillow and add the contents to 50 mL 

of deionized or demineralized water. Both liquid and powder buffers assure accuracy (±0.02 pH units) and are NIST traceable. 

pH Buffer Pillows 

Buffers with pH values of 4.01, 7.00, and 10.01 are color-coded for 

added convenience. All carry the DOT code ∆NR and are for 50-mL 

solution volumes. pH is ±0.02 at 25°C. 

pH Quantity Prod. No. Price 

Color-Coded 

4.01 (Red) 15 2226995 $7.80 

50 2226966 14.50 

250 2226964 59.80 

7.00 (Yellow) 15 2227095 7.80 

50 2227066 14.50 

250 2227064 59.80 

10.01 (Blue) 15 2227195 7.80 

50 2227166 14.50 

250 2227164 59.80 

4.01 (Red) 7.00 (Yellow) 10 of each 2299264 9.80 

Colorless 

5.00 15 1409795 9.30 

6.00 50 1405566 15.40 

6.86 15 1409895 9.30 

8.00 15 1407995 9.30 

9.00 50 1410766 14.50 

pH Storage Solution 500 mL 2756549 24.60 

pH Buffer Solutions 

pH is ±0.02 at 25ºC. 

Item Unit Prod. No. Price 

pH 4.01 Color-Coded Red (NIST) 

pH 7.00 Color-Coded Yellow (NIST) 

pH 10.01 Color-Coded Blue (NIST) 

pH 4.01 Colorless (NIST) 



500 mL 2283449 $9.20 

4 L 2283456 36.50 

20 L 2283461 97.75 

500 mL 2283549 9.20 

4 L 2283556 36.50 

20 L 2283561 97.75 

500 mL 2283649 9.20 

4 L 2283656 36.50 

20 L 2283661 97.75 

500 mL 1222349 8.70 

4 L 1222356 35.30 

500 mL 1222249 8.70 

4 L 1222256 35.30 

500 mL 1222149 8.70 

4 L 1222156 35.50 

50 

800-227-4224 


Standard Solutions and Reagents 

ISE Calibration Standards 

Hach’s high-quality, low-cost standards for ISE calibrations 

are accurate and stable to ensure that your ion measurements 

are as precise as possible. Hach standards are available in 

liquid form, in a variety of concentrations and quantities. 

Parameter Concentration Quantity Prod. No. Price 

Ammonia 100 mg/L 500 mL 2406549 

Calcium 100 mg/L 500 mL 4457649 21.60 

1000 mg/L 500 mL 2240349 21.50 

Chloride 100 mg/L 1 L 2370853 

1000 mg/L 500 mL 18349 

Fluoride 1 mg/L 500 mL 29149 14.95 

10 mg/L 500 mL 35949 22.39 

Nitrate 1 mg/L 500 mL 204649 

10 mg/L 500 mL 30749 

100 mg/L 500 mL 194749 

Potassium 100 mg/L 500 mL 2351749 32.05 

Sodium 100 mg/L 1 L 2318153 

1000 mg/L 500 mL 1474949 

Singlet Solution Packs 

Singlet single-use standard solutions are ideal for on-site 

analysis, eliminating the need to prepare standardized buffer 

solutions for pH meter calibration. You can have fresh pH buffer 

solutions without having to purchase and carry deionized or 

demineralized water. The convenient foil-pouch packaging maintains 

freshness, and keeps the solutions contaminant-free and ready to 

travel with you anywhere. 

Item Quantity Prod. No. Price 

pH 7.00 and pH 10.01 Buffer Solution pk/10 of ea. 2769820 

pH 4.01 and pH 7.00 Buffer Solution pk/10 of ea. 2769920 24.60 

pH 4.01 Buffer Solution pk/20 2770020 

pH 7.00 Buffer Solution pk/20 2770120 24.60 

pH 10.01 Buffer Solution pk/20 2770220 



pH STORAGE SOLUTIONS 

2756559 pH Storage Solution (3M Potassium Chloride), 50 mL $12.30 

2756549 pH Storage Solution (3M Potassium Chloride), 500 mL 24.60 

BOD NUTRIENTS AND SEED INOCULUM 

1416066 BOD Nutrient Buffer Pillows, 8.05 

prepares 300 mL, 50/pk 


prepares 3 L, 50/pk 





253335 Formula 2533 Nitrification Inhibitor, 35 g 16.09 

253334 Formula 2533 Nitrification Inhibitor, 500 g 126.00 

2918700 BOD Seed Inoculum, 50 capsules, Polyseed 111.00 

CONDUCTIVITY STANDARDS 

2307542 85.47 mg/L NaCl, 180 µS/cm, 100 mL 10.40 

1440042 491 mg/L NaCl, 1000 µS/cm, 100 mL 12.05 

2307442 10,246 mg/L NaCl, 18,000 µS/cm, 100 mL 10.50 

FLUORIDE IONIC STRENGTH ADJUSTOR 

258901 Powder, 454 g 63.10 

258999 Powder Pillows, 100 39.75 

2829017 Solution, 3.78 L 47.10 

PLATINUM SERIES PH PROBE KCL GEL CARTRIDGE 

2546902 KCl Reference Electrolyte Gel, cartridges 2/pk 10.65 


FLUORIDE STANDARD SOLUTIONS AS F (NIST) 

40505 0.5 mg/L, 500 mL $14.95 

29149 1.0 mg/L, 500 mL 14.95 

29153 1.0 mg/L, 1 L 21.05 

40520 2.0 mg/L, 500 mL 14.95 

2797149 5.0 mg/L 500 mL 18.75 

35949 10 mg/L, 500 mL 22.39 

23249 100 mg/L, 500 mL 26.39 

NITROGEN-AMMONIA STANDARD SOLUTIONS AS NH 3 -N 

189149 1 mg/L, 500 mL 16.65 

15349 10 mg/L, 500 mL 16.65 

1479120 50 mg/L, 2-mL PourRite Ampule, 20 36.00 

1479110 50 mg/L, 10-mL Voluette ® Ampule, 16 42.09 

2406549 100 mg/L, 500 mL 16.39 


NITROGEN-NITRATE STANDARD SOLUTIONS AS NO 3 -N (NIST) 

204649 1 mg/L as NO 3 -N, 4.43 mg/L as NO 3 -, 500 mL 16.65 


30749 10 mg/L, 44.3 mg/L as NO 3 -, 500 mL 13.29 

2415132 15 mg/L, 100 tests MDB 8.79 

194749 100 mg/L as NO 3 -N, 443 mg/L as NO 3 -, 500 mL 15.95 


1279249 1000 mg/L as NO 3 -N; 4430 mg/L as NO 3 -, 500 mL 20.39 

SODIUM ELECTRODE STORAGE SOLUTION 

4451659 50 mL 8.50 

SODIUM STANDARD SOLUTION AS Na 

2318153 100 mg/L, 1 L (NIST) 23.00 

1474949 1000 mg/L, 500 mL (NIST) 20.75 



51

Radiometer Analytical Standards 


Radiometer Analytical certified pH and conductivity standards give you: 

• Total control of the traceability chain and calculated uncertainties 

• Direct traceability to primary standards and the reference method 

• The competence and integrity of a laboratory internationally recognized to be accredited for the measurement of 

pH and conductivity reference materials 

Accredited calibration laboratory 

The use of standards manufactured by an accredited laboratory gives 

you complete confidence in the traceability chain and calculated 

uncertainties. Radiometer Analytical is part of the Hach Lange group 

and their Calibration Laboratory, located in Berlin, is accredited for 

the calibration of certified pH and conductivity standards by DKD, the 

German national accreditation authority. This accreditation (No. DKD- 

K-47901) is recognized in more than 35 countries. All standards are 

formulated in compliance with NIST, IUPAC and DIN19266 

specifications 1 . 

IUPAC Series Certified pH Standards 

IUPAC Series certified pH standards are fully traceable to the 

Standard Hydrogen Electrode through Certified Reference Material 

produced by the Primary Laboratory of either NIST or DFM 2 . 

Radiometer Analytical Certified 

Conductivity Standards 

Radiometer Analytical certified conductivity standards are fully 

traceable to SI units via Certified Reference Materials manufactured 

by NIST. They are prepared and calibrated according to the 

internationally recognized demal scale laid down by the International 

Organisation of Legal Metrology (OIML – Recommendation No. 56). 

1 Except pH7.000 formulated by us according to NIST, IUPAC and DIN19266 

specifications of pH6.865 and pH7.413. 

2 Dansk Fundamental Metrologi A/S is accredited for pH measurements by the 

Danish Accreditation and Metrology Fund (DANAK)(no. 255). 

Type Value* Qty Product No. Price 

IUPAC Series Certified pH Standards 

pH1.679 pH 1.679 ±0.010 at 25°C 500 mL S11M001 $29.40 

pH4.005 pH 4.005 ±0.010 at 25°C 500 mL S11M002 29.40 

pH6.865 pH 6.865 ±0.010 at 25°C 500 mL S11M003 29.40 

pH7.000** pH 7.000 ±0.010 at 25°C 500 mL S11M004 29.40 

pH7.413 pH 7.413 ±0.010 at 25°C 500 mL S11M005 29.40 

pH9.180 pH 9.180 ±0.010 at 25°C 500 mL S11M006 29.40 

pH10.012 pH 10.012 ±0.010 at 25°C 500 mL S11M007 29.40 

pH12.45 pH 12.45 ±0.05 at 25°C 500 mL S11M008 29.40 

Certified Conductivity Standards 

KCl 1 D 111.3 mS/cm ±0.5% at 25°C 500 mL S51M001 49.50 

KCl 0.1D 12.85 mS/cm ±0.35% at 25°C 500 mL S51M002 49.50 

KCl 0.01D 1408 µS/cm ±0.5% at 25°C 500 mL S51M003 49.50 

NaCl 0.05% 1015 µS/cm ±0.5% at 25°C 500 mL S51M004 49.50 

NaCl 25** 25.0 µS/cm ±5% at 25°C 250 mL S51M013 44.30 

* Tolerance. 

** Supplied in a glass bottle. 

Each standard is delivered in an airtight can and is supplied with a 

film-wrapped Certificate of Conformity and Traceability as well as a 

DKD Calibration Certificate specifying the exact measured value and 

calculated expanded uncertainty (k=2) for each batch of pH and 

conductivity solution. 

52 

800-227-4224 




Laboratory 

Turbidimeters 

See Inside! 

• Trusted Hach laboratory and 

portable turbidimeters. 

• StablCal ® Standards for quick 

and accurate calibration of your 

turbidimeters. 

Laboratory Turbidimeters

2100 Series Laboratory Turbidimeters 

Laboratory Turbidimeters 

Enhanced performance for the demanding user. 

These turbidimeters are the primary standard for versatility, accuracy, and value. Hach makes a 

2100 Series Turbidimeter for virtually every application—and every model includes technology and 

reliability you won’t find anywhere else. Regardless of your requirements for regulatory compliance, 

accuracy, or sensitivity at extremely high or low levels of turbidity, there is a 2100 Series Turbidimeter 

that meets your needs exactly. 

2100AN Turbidimeter 

2100N Turbidimeter 

Applications Monitoring and regulatory reporting of turbidity in Monitoring and regulatory reporting of turbidity in 

drinking water, wastewater, and process water. 

drinking water, wastewater, and process water. 

Monitoring and quality control of chemicals and 

Flow Cell accessories allow automatic or 

pharmaceuticals, highly colored samples and samples 

semiautomatic operation. 

with high turbidity. Flow Cell accessories allow 

automatic or semiautomatic operation. 

Principle of Operation 

Nephelometric Ratio Selectable on or off 

Measurement Modes Select NTU, EBC, Nephelo, ABS, %T, or CU Select NTU, EBC or Nephelo 

Ranges 

NTU Mode RATIO ON: Manual 0-0.999, 0-9.99, 0-99.9, 0-10,000; RATIO ON: Manual 0-0.999, 0-9.99, 0-99.9, 0-4000; 

Auto 0-10,000 Auto 0-4000 

RATIO OFF: 0-40.0 RATIO OFF: 0-40.0 

Absorbance Manual: 0.0 to 0.999 ABS, 0 to 2.00 ABS; — 

Auto: 0.0 to 2.00 ABS 

Transmittance Range: 0.0 to 200 %T; Resolution: 0.1 %T — 

Color (at 455 nm) Range: 0 to 500 CU; Resolution: 1 CU — 

Accuracy* 

Turbidity ± 2% of reading plus 0.01 NTU from 0 to 1000 NTU ± 2% of reading plus 0.01 NTU from 0 to 1000 NTU 

± 5% of reading from 1000 to 4000 NTU ± 5% of reading from 1000 to 4000 NTU 

± 10% of reading from 4000 to 10,000 NTU — 

Color Measurements † ± 2 CU from 0-30 (calibrated at 15 CU) — 

± 5 CU from 0-500 (calibrated at 500 CU) — 

ABS (Photometric Linearity) † ± 0.005 ABS from 0-1 ABS at 455 nm — 

%T (Photometric Linearity) † ± 0.12%T from 10 to 100 %T at 455 nm — 

Resolution 

0.001 on lowest range 

Repeatability* 

Response Time 

Light Source 

Temperature Ranges 

Operating (inst. only) 

Storage (inst. only) 

Sample 

±1% of reading or ±0.01 NTU, whichever is greater 

6.8 sec. with signal avg. off or 14 sec. with signal avg. on 

2100N and 2100AN: Tungsten lamp. Typical lamp life is 8800 hours. 

2100N IS and 2100AN IS: Infrared light emitting diode (LED) 870 ±30nm; 10 yr continuous life expectancy 

0 to 40°C (32 to 104°F) 

–40 to 60°C (–40 to 140°F) 

0 to 95°C (32 to 203°F) 

Sample Cells Six, 95-mm x 25-mm (3.74” x 1”) 

Sample Volume Required 

20 mL (0.7 oz) 

Built-in Printer Built-in 28 column thermal printer — 

Serial Input/Output 

RS232 serial interface (bidirectional) 

Warranty 

2 Years 

* Reference conditions: 23 ±2°C, 50% Relative Humidity ±10% Relative Humidity Noncondensing, 115/230 Vac ±17%, 50/60 Hz. 

† Flow cell required to achieve cited specifications. 

72 

800-227-4224 


2100 Series Laboratory Turbidimeters 

2100 SERIES LABORATORY TURBIDIMETERS 

Each instrument is supplied with six sample cells, a complete set 

of StablCal ® Primary Calibration Standards in sealed vials, silicone 

oil and oiling cloth, dust cover, instrument and operations manuals, 

and a power cord. Model 2100AN also includes a 455 nm filter for 

Pt-Co color measurement. Models 2100AN and AN IS also include 

printer paper. 

IMPORTANT: for EPA reporting purposes, order 2100N or 2100AN 

models only. The 2100P is an EPA-compliant portable option. 


EPA-COMPLIANT 

4700000 2100N Laboratory Turbidimeter $1,760.00 

110/220 Vac, with a North American 

power cord and a fuse. 

4700002 2100N Laboratory Turbidimeter 1,760.00 

110/220 Vac, with a continental European 


4700100 2100AN Laboratory Turbidimeter 2,831.00 

110/220 Vac, with a North American 


4700102 2100AN Laboratory Turbidimeter 2,831.00 

110/220 Vac, with continental European 


ISO-COMPLIANT 

4790000 2100N IS Laboratory Turbidimeter 1,760.00 

with a North American power cord. 

4790002 2100N IS Laboratory Turbidimeter 1,760.00 

with a continental European power 

cord and a fuse. 

4790100 2100AN IS Laboratory Turbidimeter 2,831.00 

with a North American power cord. 

4790102 2100AN IS Laboratory Turbidimeter 2,831.00 

with a continental European power 

cord and a fuse. 

ACCESSORIES 

4744900 Kit, Manual Flow Cell 564.00 

4745000 Kit, Automated Flow Cell, 115 Vac 806.00 

4745002 Kit, Automated Flow Cell, 230 Vac 821.00 

4745100 Kit, High Pressure Flow Cell 432.00 

4397500 Kit, Sample Degassing 22.99 

4397510 Kit, Sample Filtration & Degassing 50.49 

2489500 Branson Ultrasonic Bath for cleaning cells 837.00 

3036300 Color Filter Module for 410 nm wavelength 137.00 


(included with 2100AN) 

3031200 Color Filter Module for EPA compliance 129.00 






3033400 Cell Adapter for 12 and 13 mm vials 106.00 

2662105 StablCal Set for 2100N/N IS 119.00 

2659505 StablCal Set for 2100AN/AN IS 143.00 

2589000 Gelex Secondary Standard Set for 2100N/N IS 178.00 

2589200 Gelex Secondary Standard Set for 2100AN/AN IS 214.00 

2084900 Sample Cells, 1" round glass, 36.15 

30 mL with cap, qty/6 

4707600 Polishing Cloth 8.60 

126936 Silicone Oil 8.79 

4708900 Lamp Replacement Kit for 2100N and 2100AN 80.85 

For calibration and verification standards, see page 75. 

For sample cells, see page 82. 

Hach Flow Cells eliminate the time-consuming task of matching sample cells. 

Additional Color Filter Modules for the 2100AN Turbidimeter provide 

a variety of color measurement methods for specialized applications. 

Sample preparation tools include: a sample degassing kit and 

a sample filtration and degassing kit. 

For more information, call to request 

Literature #2498, or visit www.hach.com 




73

2100 Series Portable Turbidimeter 


Bringing laboratory-level performance on-site. 

Lab-Quality Results in a Portable Unit 

The 2100P Portable Turbidimeter performs at a level normally 

associated with laboratory instruments. Its microprocessor-controlled 

touch-key functions and patented Ratio Optical System bring 

greater accuracy, sensitivity, and reliability to field testing. The twodetector 

optical system compensates for color in the sample, light 

fluctuation, and stray light, allowing analysts to achieve laboratorylevel 

results with a wide range of samples, even under difficult 

on-site conditions. 

Direct Digital Readout of Results 

The 2100P provides direct digital readout in nephelometric 

turbidity units (NTUs), completely eliminating the uncertainty of 

analog indicators and the need for calculations or interpolation 

of calibration charts. 

• Selectable signal averaging mode compensates for fluctuations in readings 

caused by movement of large particles in the light path 

• Pre-programmed calibration procedure, with microprocessor-controlled 

adjustment of calibration curve. No potentiometers to adjust 

• Electronic zeroing: compensates for electronic and optical offsets; no manual 

adjustments are required 

• Built-in diagnostics 

accessible with 

one keystroke 

• Range: 0 to 1000 NTUs 

• Direct digital readout 

in NTU 

• Meets or exceeds EPA 

method 180.1 criteria 

• Two-year warranty 

Ideal for Regulatory Reporting 

With a measurement range of 0 to 1000 NTUs and resolution to 0.01 

NTU, the 2100P is ideal for regulatory monitoring, process control 

applications, and field studies. Choose from three manual range 

modes: 0 to 9.99, 0 to 99.9, or 0 to 1000 NTU. Or select automatic 

range mode for samples that vary widely in turbidity. 

Ready for Field Use 

The 2100P comes field-ready with four AA alkaline batteries 

(optional battery eliminator available), all necessary apparatus, a set 

of primary and secondary standards, and a rugged carrying case. 

The instrument itself weighs less than 0.45 kg (~1 lb). The complete 

analytical package, including case, apparatus, standards, and 

instructions, weighs just under 2.7 kg (6 lb). 




Applications 

Field and laboratory monitoring 

and regulatory reporting of drinking 

water, wastewater, and treated 

(low-turbidity) process water. 

Principle of Operation 

Nephelometric Ratio 

Measurement Modes 

NTU 

Ranges 

0-1000 NTU in automatic range 

mode or manual range selection of 

0-9.99, 0-99.9 and 0-1000 NTU 

Accuracy † 

±2% of reading or ±1 least 

significant digit from 0-500 NTU; 

±3% of reading between 

500-1000 NTU 

Resolution 

0.01 on lowest range 

Repeatability † 

±1% of reading, or 0.01 NTU, 

whichever is greater (with Gelex 

standards) 

Response Time 

6 sec. for full step change (signal 

avg. off) in constant reading mode 

Light Source 

Tungsten lamp. 

Temperature Ranges 

Operating (inst. only) 

0 to 50°C (32 to 122°F) 

Storage (inst. only) 

-40 to 60°C (-40 to 140ºF) 

Sample 

0 to 95°C (32 to 203ºF) 

Sample Cells 

60.0-mm high x 25-mm diam. 

(2.36” high x 1” diam.) 

Sample Volume Required 

15 mL (0.5 oz) 


† Reference conditions: 23 ±2°C, 

50% RH ± 10% RH Noncondensing, 

115/230 Vac ± 17%, 50/60 Hz. 

Each Model 2100P Portable Turbidimeter is supplied with six sample 

cells, set of four standard ampules of

Turbidity Standards 

StablCal ® Stabilized Formazin Primary Standards 

StablCal Stabilized Formazin Turbidity Standards are true Formazin dilutions developed for 

use in any turbidimeter. With proprietary manufacturing technology, Hach prepares StablCal 

Standards in precise concentrations for conventional turbidimeters. Shelf life is guaranteed 

on unopened bottles for two years from date of manufacture. Monitor wastewater effluent, 

high-quality treated drinking water, or an industrial process stream with complete confidence 

in the results with Hach StablCal Stabilized Formazin Standards. 

StablCal Stabilized Formazin Standards are equivalent in performance to Formazin primary 

standards, but require no special preparation. Accuracy is assured by reducing the margin 

for error while greatly reducing labor and precious time in the laboratory. Calibration of 

turbidimeters with StablCal can be done quickly and accurately. 

• No preparation of Formazin stock 

• No dilutions 

• Minimal handling 

• No special glassware or difficult lab techniques 

• StablCal can be used to calibrate a turbidimeter 

made by any manufacturer 

Individual Values for All Turbidimeters 

StablCal ® Stabilized Formazin Turbidity Standards 

are available in 100 mL, 500 mL, 1L, 1 gallon 

bottles, or in convenient sealed vials. Sets are 

available that include the specific range of NTU 

values needed to calibrate any turbidimeter. 

NTU 100 mL bottle 500 mL bottle 1000 mL bottle 1 gallon (3.78L) bottle 

value Prod. No. Price Prod. No. Price Prod. No. Price Prod. No. Price 

On-line Turbidimeters and Analyzers 


Hach offers a full line of on-line turbidimeters and suspended solids analyzers for all your process needs. 

Please see pages 456-465 for complete product descriptions. 

FilterTrak 660 sc 

Laser Nephelometer 

See page 456. 

SOLITAX ® sc Turbidity and 

Suspended Solids Sensors 


1720E Low Range Process 

Turbidimeter 

See page 457. 

ULTRATURB plus sc 

Sensor 

See page 459. 

TxPro-2 Suspended Solids 

Analyzer and Probes 

See page 462. 

Accu4 Low Range 

Process Turbidimeter 

See page 458. 

Surface Scatter ® 7 sc 

Turbidimeter 

See page 463. 

76 

800-227-4224 




Sample Cells 

Sample Cells 

See Inside! 

• Quick Reference Guide 


• Sample Cells for Spectrophotometers 

and Colorimeters 


• Sample Cells for Turbidimeters 

See pages 82. 

• Pour-Thru Sample Cells 

See pages 83.

Quick Reference Guide 

Sample Cells 

This Quick Reference Guide is designed to help select which sample cell you will need to measure a specific 

parameter with your instrument. For detailed images and footprints of the sample cells, see pages 80-82. 

Pocket Pocket DR/800 DR 2700 

Colorimeter Colorimeter II Series* DR/2010 DR/2400 DR/2500 DR 2800 DR/4000 DR 5000 

Aluminum (Aluminon) 2427606 2427606 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Aluminum (ECR) 2495402 2427606 2427606 2495402 2665902 2495402 

Arsenic 2095000 2401906 2401906 2612602 2665902 2612602 

Barium 2095000 2401906 2401906 2495402 2665902 2495402 

Benzotriazole 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Boron, LR (Azomethine-H) 2401906 2410212 5940506 2410212 2410212 2410212 2410212 

Boron (Carmine) 2095000 2401906 2401906 2495402 2665902 2495402 

Bromine 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Bromine, HR 4165802 4864302 

Cadmium (Dithizone) 2095000 2612602 2612602 2612602 

Chloramine (Mono), LR 4165802 4864302 4864302 4864302 5940506 5940506 5940506 4864302 4864302 

Chloride 2095000 2401906 2401906 2495402 2665902 2495402 

Chlorine Dioxide (Amaranth) Reagents available only in Europe. 2427606 2427606 2495402 2612602 2495402 

Chlorine Dioxide (DPD) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Chlorine Dioxide, LR (Chlorophenol Red) 2095000 2401906 2401906 2495402 2665902 2495402 

Chlorine Dioxide, MR (Direct Reading) Not available with DR 2700. 2401906 2495402 2612602 2495402 

Chlorine Dioxide, HR (Direct Reading) 2095000 2427606 2427606 2495402 2612602 2495402 

Chlorine, Free & Total 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Chlorine, Free & Total, HR 4165802 4864302 4864302 4864302 5940506 5940506 5940506 4864302 4864302 

Chlorine, Free & Total (DPD RL) 4521500 5940400 5912200 5940400 LZV479 

Chlorine, Total, ULR 4521500 5940400 5912200 5940400 4807004 LZV479 

Chromium, Hexavalent 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Chromium, Total 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Cobalt 2495402 2427606 2427606 2495402 2612602 2495402 

Color (ADMI) 2665902 2629250 

2095100 

2495402 

Color, Gardner 2095100 

Color, Tristimulus 2095100 

Color, True & Apparent, LR 2629250 2629250 

Color, True & Apparent 2401906 2095000 2427606 2427606 2495402 2665902 2495402 

Color, Yellowness Index 2095100 

Copper (Bichinchoninate) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Copper, LR (Porphyrin) 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Cyanide 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Cyanuric Acid 2401906 2095000 2401906 2401906 2495402 

Fluoride (SPADNS) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Formaldehyde 2095000 2427606 2427606 2495402 2665902 2495402 

Hardness, Calcium & Magnesium (Calmagite) 3 cells required. 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Hardness, Total, Calcium & Magnesium, ULR (Chlorophosphonazo) 2410212 5940506 2410212 2410212 2410212 

Hardness, Total, ULR (Chlorophosphonazo RL) 4521500 5940400 5912200 5940400 LZV479 

Hydrazine 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Iodine 2495402 2427606 2427606 2495402 2665902 2495402 

Iron (FerroZine) 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Iron (FerroZine RL) 4521500 5940400 5912200 5940400 LZV479 

Iron, Ferrous 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Iron, Total (FerroVer) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Iron, Total (FerroMo) 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Iron, Total (TPTZ) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Iron, Total, HR ( FerroVer) 4165802 

*Please see page 68 for individual instrument capabilities. 

78 

800-227-4224 


Quick Reference Guide 

Pocket Pocket DR/800 DR 2700 

Colorimeter Colorimeter II Series* DR/2010 DR/2400 DR/2500 DR 2800 DR/4000 DR 5000 

Lead (Dithizone) 2095000 2612602 2612602 2612602 

Lead (LeadTrak) 2122800 2427606 2122800 2401906 2401906 2495402 2612602 2495402 

Manganese, LR (PAN) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Manganese, HR (Periodate Oxidation) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Mercury 2495402 2427606 2427606 2495402 2665902 2495402 

Molybdenum, LR (Ternary Complex) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Molybdenum, HR (Ternary Complex) 2427606 2427606 

Molybdenum, HR (Mercaptoacetic Acid) 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Nickel (Heptoxime) 2095000 2401906 2401906 2612602 2612602 2612602 

Nickel (PAN) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2612602 2495402 

Nitrate (Direct Read UV) 2624410 4822800 

Nitrate, N, LR (Cadmium Reduction) 2401906 2095000 2427606 2427606 2495402 2612602 2495402 

Nitrate, N, MR (Cadmium Reduction) 2401906 2095000 2427606 2427606 2495402 2612602 2495402 

Nitrate, N, HR (Cadmium Reduction) 2427606 2427606 2401906 2095000 2427606 2427606 2495402 2612602 2495402 

Nitrite, N, LR (Diazotization) 2401906 2495402 2427606 2427606 2495402 2612602 2495402 

Nitrite, N, HR (Ferrous Sulfate) 2401906 2495402 2427606 2427606 2495402 2612602 2495402 

Nitrogen, Free Ammonia 4864302 4864302 4864302 5940506 5940506 5940506 4864302 4864302 

Nitrogen, Ammonia (Nessler) 2095000 2427606 2427606 2495402 2665902 2495402 

Nitrogen, Ammonia (Salicylate) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2612602 2495402 

Nitrogen, Total Kjeldahl with Nessler finish 2401906 2095000 2427606 2427606 2495402 2665902 2495402 

Organic Constituents (UV-254) 2624410 4822800 

Oxygen Scavengers 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

pH 2427606 2427606 2401906 

Phenols 2095000 2401906 2401906 2612602 2612602 2612602 

Phosphonates 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Phosphorus, Reactive (Amino Acid) 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Phosphorus, Reactive, LR (Ascorbic Acid RL) 4521500 5940400 5912200 5940400 4807004 LZV479 

Phosphorus, Reactive (Molybdovanadate) 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Phosphorus, Reactive, HR (Molybdovanadate RL) 4521500 5940400 5912200 5940400 4807004 LZV479 

Phosphorus, Reactive (PhosVer 3) 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Potassium 2095000 2401906 2401906 2495402 2665902 2495402 

Quaternary Ammonium Compounds 2095000 2401906 2401906 2495402 2665902 2495402 

Selenium 2095000 2427606 2427606 2612602 2612602 2612602 

Silica, ULR (Heteropoly Blue, Heteropoly Blue RL) 4521500 5940400 5912200 5940400 4807004 LZV479 

Silica, LR 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Silica, HR 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Silica, UHR 2401906 

Silver 2095000 2401906 2401906 2495402 2665902 2495402 

Sodium Chromate 2095000 

Sulfate 2427606 2427606 2401906 2095000 2427606 2427606 2495402 2665902 2495402 

Sulfide 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Sulfite (Colorimetric) Reagents available only in Europe. 2427606 2427606 2495402 2612602 2495402 

Surfactants 2401906 2095000 2401906 2401906 2612602 2612602 2612602 

Suspended Solids 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Tannin & Lignin 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Tolyltriazole 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Trihalomethanes (THM Plus) 2427606 2427606 2495402 2427606 2495402 

Turbidity 2401906 2095000 

Volatile Acids 2401906 2095000 2401906 2401906 2495402 2665902 2495402 

Zinc 2427606 2427606 2401906 2495402 2427606 2427606 2495402 2665902 2495402 

Sample Cells 

*Please see page 68 for individual instrument capabilities. 



79

For Spectrophotometers and Colorimeters 

Sample Cells 

The following pages explain our sample cells, with actual size footprints of each cell. Refer to the Quick 

Reference Guide on pages 78-79 to help select which sample cell you will need to measure a specific parameter 

with your instrument. 

1" Square Glass, 25 mL, matched pair 

Footprint 2 Cells 2095000 $72.85 

1" Round Tall Glass, 10 mL, cell w/cap 


Height = 60 mm 

Size 2 Neoprene Stoppers (optional) 12/pack 1480802 7.35 

1" Round Short Glass, 10 mL, cell w/cap 

Footprint 1 Cell 2122800 5.59 

1 pair of cells is included with purchase of most Pocket 

Colorimeter II instruments. See Quick Reference Guide 

for details. 

1" Square Glass, 10 mL, matched sets 

Footprint 2 Cells 2495402 80.35 


Set of 8 2495408 299.00 


1 pair of cells is included with purchase of DR 5000 UV-Vis, 

DR 2800, or DR 2700 Spectrophotometer. 

1" Round Glass (10, 20, 25) mL w/cap 


1" Square Glass (10&25) mL, matched pair w/glass stopper 



1 pair of cells is included with purchase of DR 800 Series 

Colorimeter. 

1" Square Polystyrene 25 mL w/caps 


12 Cells 2410212 45.45 

1" Square Glass (10&25) mL, matched sets 


4 Cells 2665904 203.00 

8 Cells 2665908 401.00 


80 

800-227-4224 



1" Round Plastic (5&10) mL, 1 cm pathlength w/cap 


For use with the original (blue) Pocket Colorimeter. 

1 cm Square Quartz, 

10 mm pathlength 


1 Cell 2624410 136.00 

1" Round Plastic (5&10) mL, 1 cm pathlength w/cap 


1 pair of cells is included with purchase of DR/800 Series 

Colorimeter and select Pocket Colorimeter II instruments. 

1" Round Plastic (5,10,25) mL, 

1 cm & 1" dual pathlength w/cap 


Sample Cells 

1 pair of cells is included with purchase of DR 5000 UV-Vis 

Spectrophotometer. 

1 cm Square Glass, 10 mm pathlength cell, matched pair 


10 cm Rectangular Quartz, 100 mm pathlength cell 


5 cm Rectangular Quartz, 50 mm pathlength cell 


10 cm Rectangular Glass, 100 mm pathlength cell 


Continued on next page. 



81


General Purpose 

Sample Cells 

5 cm Rectangular Glass, 50 mm pathlength cell 

Footprint 1 Cell 2629250 $102.00 

1 cm Rectangular Polystyrene 1.5 mL, 10 mm pathlength cell 


1 cm Square Polystyrene 4.5 mL, 10 mm pathlength cell 


For Turbidimeters 

Use these cells to assure proper performance 

of your Hach turbidimeter. 

1" Round Glass, 30 mL cell 


1" Round Glass, 30 mL, w/cap 


For use with Hach 2100A Turbidimeters. 

1" Round Glass, 10 mL, cell w/cap 


For use with Hach Ratio 18900, 2100N and 2100AN 

Laboratory Turbidimeters. 

For use with Hach 2100P Portable Turbidimeters. 

82 

800-227-4224 


Pour-Thru Sample Cells 

Pour-Thru Sample Cells 

DR 5000 Pour-Thru Kit 

Product No. LZV479 

Sample Cells 

DR 2800 Pour-Thru Kit 


(Instrument not included.) 


POUR-THRU CELL KITS 

LZV479 Pour-Thru Module Kit (1 in.) for DR 5000 $941.00 

4807004 Flow Cell Module Kit (1 in.) for DR/4000 969.00 

5912200 Pour-Thru Cell Kit (1 in.) for DR/2500 287.00 

5940400 Pour-Thru Cell Kit (1 in.) for DR 2800, DR 2700, 

& DR/2400 182.00 

4521500 Pour-Thru Cell Kit (1 in.) for DR/2010 350.00 


INDIVIDUAL POUR-THRU CELLS 

4521400 Pour-Thru Cell (1 in.) for DR/2000 & DR/2010 $185.00 

4931900 Pour-Thru Cell (1 cm) for DR/2000 & DR/2010 160.00 

5941000 Pour-Thru Cell (Multi-pathlength–1 in. or 1 cm) 34.00 

for DR 2800, DR 2700, & DR/2400 

5913700 Pour-Thru Cell (1 in.) for DR/2500 & DR 5000 143.00 

4951400 Pour-Thru Cell with adapter (1 in.) 514.00 

for DR/4000 

4953900 Pour-Thru Cell with adapter (1 cm) 567.00 

for DR/4000 

A24209 Pour-Thru Cell (1 cm, 160 µL quartz) 454.00 

for DR 5000 

LZV510 Pour-Thru Cell (1 cm, 450 µL quartz) 491.00 

for DR 5000 



83

Find it… 

Buy it… 

on Hach.com 

24 hours a day 

7 days a week 

NEW! 

Live Help 

Need Help 

Get “Live Help” on Hach.com for: 

• Technical Support 

• Product Information 

• Assistance With Ordering 

Visit www.hach.com/ordernow to begin browsing and ordering today!



Titration Products 


See Inside! 

• AutoCAT 9000 for automatic 

amperometric titrations. 


• TitraLab ® Titration Workstations with 

pre-programmed applications. 


• Hach Digital Titrator: an accurate 

alternative to buret titration. 

See pages 90-93.

AutoCAT 9000 Titrator 


Revolutionary instrument for 

automatic amperometric 

titrations. 

• Automatic calculation of analyte concentration 

• Automatic “hands-free” operation 

• Easy-to-use interface 

• Real-time graphics and graphic print output 

• Automatic archiving of results 

• Titrant calibration 

• Electrode cleaning 

• Greater accuracy and precision than manual titrations 

Built-In Titrant Standardization Procedures 

Users are guided through the standardization of the titrant with 

methods built into the instrument. Titrant concentration is 

automatically updated after standardization and can also be entered 

from the Certificate of Analysis (downloadable from www.hach.com), 

for the specific lot of titrant used. 

The AutoCAT 9000 has the 

following USEPA approved 

methods: 

• Forward titration for Free Chlorine, 0.1 to 5 mg/L 

(Standard Method 4500-Cl D. 4b) 

• Forward titration for Total Chlorine, 1.2 µg/L to 5 mg/L 

(Standard Method 4500-Cl D. 4d) 

• Back titration for Total Chlorine, 5.1 µg/L to 5 mg/L 

(Standard Method 4500-Cl C.) 

• Chlorine Dioxide with Chlorite, 0.1 to 5 mg/L 

Standard Method 4500-ClO 2 E.) 

• Sulfite (as SO 2 , Sodium Bisulfite) 

Automated EPA Approved Methods 

The AutoCAT automates the USEPA approved amperometric titration 

procedures for chlorine, chlorine dioxide, and chlorite determinations 

as described in “Standard Methods for the Examination of Water and 

Wastewater.” Sample preparation is presented to the user in easy to 

understand screen displays. When the titration begins, the titration is 

entirely “hands-off.” 

Real-Time Graphic Display of the Titration Curve 

See the data as it is collected, to immediately assess the quality of 

the analysis. 

Full- and Semi-Automatic End Point Determination 

Endpoints can be identified by automatically determining the 

intersection of straight line-fits to the titration data points. 

Alternatively, the user can select regions of the titration curve before 

and after the endpoint. Best line-fits are then used through these 

regions to determine the endpoint. Data is graphically displayed on 

the screen. Endpoint determination can be repeated before accepting 

the final result. 

Automatic Calculation of Analyte Concentrations 

After the endpoint is determined, concentration is automatically 

calculated using the titrant concentration, volume of titrant delivered 

at the endpoint, and the appropriate formula for the selected method. 

Graphic Hard Copy of Analysis Results 

Printed copies of analysis reports can be made with graphic titrant 

curve and text. 

86 

800-227-4224 


AutoCAT 9000 Titrator 

Features and benefits for your specific industry. 

Drinking Water 

Parameter Rule Limit/Range Benefit 

Residual chlorine dioxide D/DBP, 1998 0.8 mg/L Calibration of Process instruments, and/or 

grab sample monitoring for validation 

Residual chlorite D/DBP, 1998 < 1.0 mg/L Daily Chlorite monitoring by 

amperometric titration, according to 

D/DBP rule 

ClO 2 generator efficiency Process optimization High, must dilute sample Reduce cost, maximize efficiency, 

reduce DBPs 

Residual chlorine D/DBP, 1998 0.2 to 4.0 mg/L finished Calibration of Process instruments, and/or 

water; pre-disinfectant grab sample monitoring for validation 

dosage varies 

Municipal & Industrial Wastewater 

Residual chlorine NPDES regulation 0.010 to 0.100 mg/L, typical Optimize dechlorination process, 

meet regulations 

Residual chlorine Process optimization Varies Calibration of Process instruments, and/or 

grab sample monitoring for validation 


Boiler, Cooling, UltraPure Water 

Residual chlorine NPDES and/or regulation 0.010 to 0.100 mg/L, typical Optimize dechlorination process, meet 

from POTW 

regulations 

Residual chlorine dioxide, Process optimization Varies Calibration of Process instruments, and/or 

residual chlorine 

grab sample monitoring for quality 

assurance 

Residual chlorine dioxide, Process optimization Low µg/L range to below Protection of RO membranes, ion 

residual chlorine detectable limits exchange resins, quality assurance 

Food and Beverage 

Residual chlorine dioxide, Process optimization High, must dilute sample Adequate disinfection 


Residual chlorine IBWA Model Code, Low µg/L range Protection of RO membranes, ion 

process control 

exchange resins, quality assurance 

Residual chlorine dioxide, Process optimization Low µg/L range Adequate rinsing, quality assurance 


The AutoCAT ships complete with all accessories necessary for 

free and total chlorine titrations, including burette, dual platinum 

electrode, temperature sensor, stir bar, plus all tubing and reagents. 

Please see below for required reagents for chlorine dioxide/chlorite, 

or for back total chlorine methods, and accessories. 


5008100 AutoCAT 9000 $3,306.50 

ADDITIONAL REQUIRED CHLORINE DIOXIDE/CHLORITE 

METHOD REAGENTS 

141832 Hydrochloric acid std. solution, 2.5 N, 100 mL 11.89 

16726H Potassium Iodide, ACS, 100 g 35.75 

ADDITIONAL REQUIRED TOTAL CHLORINE BACK TITRATION 

METHOD REAGENT 

2333353 Iodine standard, 0.0282 N, 1000 mL 23.95 

OPTIONAL ACCESSORIES 

A70P021 Kyoline brand thermal printer with cable 282.00 

A70P025 Thermal paper for Kyoline, pkg. of 10-rolls 74.20 



For information on Hach’s 

non-automated 

Amperometric Titrator, 

call to request 

Literature #1155, or visit 

www.hach.com. 


Electrode 

Dual platinum 

Display 

Real-time graphics, menu driven, LCD 

Power Requirement 

90/264 Vac, 47/63 Hz, 115 VA 

Dimensions 

38 x 23 x 45 cm (H x W x D) 

(15 x 9 x 17.7'') 

Output 

RS-232 Serial output to printer/PC 

Languages 

English, French, and Spanish 

Enclosure 

Splashproof, with alphanumeric 

keypad 




87

Titration Workstations & Application Packages 


THE automated alternative to manual digital titration. 

• Get ready for immediate analysis by combining 

a TitraLab workstation and application package of 

your choice 

• Workstation comes complete with pre-programmed 

applications and all required accessories 

• Application package includes documentation, 

electrodes, buffer and maintenance solutions; all you 

need to supply are the samples and titrant reagents 

TitraLab Workstations Make Analyses Easy to Run 

Just follow the display; one-touch selections and an intuitive interface 

guide you with clear text messages at each step of the analysis. 

Automatic titrant addition with integrated high performance burettes 

dispensing down to micro-litre volumes offer unbeatable accuracy for 

all your volumetric titrations. 

Water Analysis 

Food Products 

pH Conductivity Alkalinity Total Hardness Workstation 

(EPA 150.1) (EPA 120.1) (EPA 310.1) (EPA 130.2) Product Number 

■ ■ R21T109 

■ ■ ■ R21T110 

■ ■ ■ ■ R21T105 

Moisture Content 

Workstation 

pH Total Acidity Chlorides (Karl Fischer) Product Number 

■ ■ R21T109 

■ ■ ■ R21T110 

■ 

R41T041 + X51T017 


TITRATION WORKSTATIONS 

R21T109 TitraLab 840/25,pH/EP/IP $4,481.00 

mono-burette titration workstation and 

25 mL burette 

R21T110 TitraLab 845/25-25, pH/EP/IP 6,129.00 

dual-burettes workstation and 25 mL burettes 

R21T105 TitraLab 870/25-25, pH/EC/EP/IP/ISE 13,133.00 

dual burettes workstation and 25 mL burettes 

R41T041 TIM580,NB Volumetric Karl Fischer 6,168.96 

titration workstation without burette 

X51T017 B510, 10 mL burette 366.00 

AVAILABLE ACCESSORIES & PERIPHERALS 

• TitraMaster 85 Windows PC software for computer 

control and data management 

• SAC sample changers for sample automation analysis 

up to 128 samples. 

• Printer, keyboards, beakers 


APPLICATION PACKAGES 

X91T052 pH & Alkalinity according EPA310.1 $692.00 

E61M010 Conductivity, four pole cell and 608.50 

+ S51M003 KCl 0.01D Demal standard solution 

X61T005 Total Hardness according EPA 130.2, 1,771.00 

+ A66B014 12Vdc Power Adapter (115/230V, Jack 2.1 mm), 

+ E71T001 and Photocolorimetric probe assembly 

X91T051 pH & Total acidity in food and 839.00 

beverage products 

X91T041 Chlorides in food products—Silver titration 277.00 

X91T050 pH, Total acidity and chlorides in food 1,082.00 

and beverage products 

88 

800-227-4224 


Titration Workstations & Application Packages 

Potentiometric Titration Workstations–Technical Specifications 

TitraLab TitraLab TitraLab 

840 845 870 

TECHNIQUES 

pH/mV measurements ■ ■ ■ 

End Point titration ■ ■ ■ 

Inflection Point titration ■ ■ ■ 

Conductivity measurements 

■ 

ISE measurements 

■ 

TITRANT ADDITION TECHNIQUES 

Continuous dynamic ■ ■ ■ 

Incremental monotonic & dynamic ■ ■ ■ 

BURETTE 

Number of titrating burettes 1 2 2 

Burette volumes (mL) 1, 5, 10, 25, 50 

Additional titrating burettes ■* 

EXTENSION/MODULE 

Sample changer ■ ■ ■ 

Balance ■ ■ ■ 

Printer ■ ■ ■ 

PC software ■ ■ ■ 

Peristaltic pump/TTL connections ■ ■ ■ 

PC keyboard and bar code reader ■ ■ ■ 

ELECTRODE INPUTS 

Indicator electrode 1 1 2 

Selectable polarized input 

±1 mA in 1 µA steps, DC or AC 

Additional electrode inputs 

■** 

Differential measurement ■ ■ ■ 

TYPES OF TITRATION 

Direct titration ■ ■ ■ 

Back titration ■ ■ ■ 

Blank determination ■ ■ ■ 

Titrant standardization ■ ■ ■ 

pH electrode calibration 

Up to 5 points 

Method sequencing Up to 3 Up to 3 Up to 10 

Method coupling per sample 2 2 6 

* Up to 4 with 2 x ABU52 

** Up to 4 indicator, 2 polarized and 2 reference with 2 ABU52 

TitraLab TitraLab TitraLab 

840 845 870 

SAMPLE LIST 

Number of samples Series up Series up Up to 126 

to 20 to 20 samples with 

alphanumeric ID 

QC sample definition 

■ 

MEASURING RANGES/RESOLUTION 

pH 

-9 to 23 pH/0.001 pH 

mV 

±2000 mV/0.1 mV 

°C -10°C to +100°C/0.1°C 

Conductivity 

4 µS to 

400 mS/cm 

RESULTS 

Auto calculation 

On selected result units 

User-defined equations 1 1 2 

QC check with visual warning 

■ 

Statistical calculations ■ ■ ■ 

Automatic GLP printout 

3 levels of detail 

STORAGE CAPACITY 

Pre-programmed methods ■ ■ ■ 

Global password protection ■ ■ ■ 

Non-volatile memory ■ ■ ■ 

User-programmable methods 10 10 50 

Electrode library 15 15 30 

Reagent library 15 15 30 

Pre-identified electrodes 

A catalogue of up to 30 electrode 

names and characteristics 

Pre-identified titrants 

A catalogue of up to 20 reagent names 

Results storage 60 60 200 

ELECTRODE STAND/STIRRING 

Magnetic stirrer ■ ■ ■ 

Propeller stirrer connection ■ ■ ■ 

Beaker volume 

5 to 400 mL 

GENERAL SPECIFICATIONS 

Casing 

Splashproof lathene 

Keypad 

Alphanumeric silicone 

Display 

Graphic 128x128 dot LCD 

Languages 

English, French, German, Danish, 

Spanish, Italian, Swedish 

Dimensions (H x W x D) 

380 x 230 x 450 mm 

Weight (excl. reagent bottles) 

5 kg 

Power requirements 47.5-63 Hz ; 115/230 Vac +15 -18% 


Each titration workstation 

comes with a dedicated 

documentation kit. 



89

Hach Digital Titrator 


Accurate, convenient titrations without the bulk, fragility, 

or waste of a conventional buret. 

EPA 

Equivalency 

for the following 

Digital Titrator 

methods: 

Acidity, Alkalinity, 

Chloride, 

Calcium Hardness, 

Total Hardness, 

Sulfite 

• Faster than a buret 

• Rugged design 

• 18 parameters 

• Interchangeable cartridges 

Digital Titrator: Fast, Precise, Economical 

Precise, less technique-sensitive 

Digital Titrator automatically calculates precise volume of titrant dispensed. 

Accuracy obtained in microliters. 

End-point easier to determine 

The number used for calculation of sample concentration is recorded directly 

from the Digital Titrator’s digital counter. 

Saves time 

Titrant cartridges can be changed in seconds and eliminate glassware clean 

up before and after titration. 

No cross contamination 

Cartridges are always fresh and sealed against outside contamination. 

Economical 

Cartridges contain strong, concentrated reagents, so comparatively low 

volumes are used – waste is minimal. 

Portable 

With the Digital Titrator, titrations can be performed in the manufacturing plant 

or the field. 

Problems with Buret Technique 

Buret technique is dependent on operator skill. 

Operator must examine level of buret to determine volume dispensed, 

a technique subject to visual interpretation. 

Titrant solutions must be prepared and measured, and all glassware must 

be acid-washed, rinsed with DI water, and dried. 

Improper handling of reagent solutions and even slightly soiled glassware 

can compromise results. 

Buret reagents are formulated with chemicals of low normality and 

subsequently require higher volumes. Ratio of standard titrant to D.T. 

cartridge is approximately 80:1. 

Buret glassware cannot be safely transported to the plant or field. 

Buret titrations require glass buret, buret stand, buret clamp, and 

funnel for filling. 

Specifications* Prod. No. Description Price 

DIGITAL TITRATOR CARTRIDGES 

TITRASTIR ® 

1690001 Digital Titrator with plastic case, a $126.00 

Delivery 

Volume 

CONTINUOUS 

manual, and five straight delivery tubes 

MIXER/STAND 

800 digits/mL or 13 mL 

1720500 Delivery tubes, straight with J-hook, 5/pk 7.25 

0.00125 mL/digit 

Dimensions 

Number of Tests 

4157800 Delivery tubes, 90° with J-hook, 5/pk 4.55 

Accuracy 

6.4 x 15.2 x 22.9 cm 

Most reagents are 

(2.5 x 6 x 9") 

1449501 Empty titration cartridge w/blank label 7.19 

±1%. (Uncertainty of formulated to provide 

readings is 1 digit. 100 typical titrations, Weight 

KIT 

Most samples require but number may vary 2.6 kg (5.75 lb) 

2270900 Universal Digital Titrator Kit with Digital 219.00 

more than 100 digits.) depending on sample 

Power Requirements 

Titrator, manual, 100-mL graduated cylinder, 

Weight 

concentration. 

115 or 230 Vac, 

125- and 250-mL Erlenmeyer flasks, 

132 g (4.7 oz) 

Weight (full) 

56.75 g (2 oz) 

50/60 Hz, 20 VA 

demineralizer bottle, clippers, and a carrying case 

*Subject to change without 

notice. 

90 

800-227-4224 


Digital Titrator Accessories 

TitraStir ® Continuous Mixer/Stand 

The Digital Titrator can be hand-held, or you can attach it to this 

convenient laboratory stand. The TitraStir Titration Stand is a 

single-speed, magnetic stirring plate with a built-in support rod and 

custom holder for the Digital Titrator. Titration flasks rest on a white 

disc, so color changes are easy to see, and the support rod can be 

used to attach clamps, rings, and other hardware. 


ACCESSORIES 

1940000 TitraStir Stand, 115 Vac $456.80 

Includes power cord, support rod and 

mounting hardware, holder for Digital Titrator 

assembly (or other apparatus), glass disc, and 

stir bar. Digital Titrator not included. 

1940010 TitraStir Stand, 230 Vac 472.50 

Includes same as above. 

REPLACEMENT PARTS FOR TitraStir STAND 

1942700 Support Rod 92.00 

1940100 Titrator/Electrode Holder 163.00 

1513700 Glass Disc (white) 16.60 

410316 Stir Bar (2" x 0.5") 5.60 

1942700 Support Rod 

1940100 Titrator/ 

Electrode Holder 

1513700 Glass Disc 

(white) 

1940000 TitraStir Stand 


NEW 

Aqua Ammonia 

method for 

measurement 

of bulk 

ammonium 

hydroxide 

solutions! 

More than 40 

ready-to-use 

titrant solutions 

are available. 

EPA Equivalent Cartridges 

Parameter Method Range Titrant Product No. Price 

Acidity 1 Methyl Orange 10-160 mg/L CaCO 3 0.1600N NaOH 1437701 

Acidity 1 Phenolphthalein 10-160 mg/L CaCO 3 0.1600N NaOH 1437701 

Acidity 1 Methyl Orange 100-4000 mg/L CaCO 3 1.600N NaOH 1437901 

Acidity 1 Phenolphthalein 100-4000 mg/L CaCO 3 1.600N NaOH 1437901 

Alkalinity 2 Phenolphthalein 10-160 mg/L CaCO 3 0.1600N H 2 SO 4 1438801 13.95 

Alkalinity 2 Phenolphthalein 100-4000 mg/L CaCO 3 1.600N H 2 SO 4 1438901 14.15 

Alkalinity, Total 2 Bromcresol/Methyl Red 10-160 mg/L CaCO 3 0.1600N H 2 SO 4 1438801 

Alkalinity, Total 2 Bromcresol/Methyl Red 100-4000 mg/L CaCO 3 1.600N H 2 SO 4 1438901 

Aqua Ammonia Colorimetric pH End Point 5-35 % as NH 3 8.00 N Sulfuric Acid 1439101 15.25 

Chloride 3 * Mercuric Nitrate 10-160 mg/L Cl - 0.2256N Hg(NO 3 ) 2 1439301 

Chloride 3 * Mercuric Nitrate 100-8000 mg/L Cl - 2.256N Hg(NO 3 ) 2 92101 

Hardness, Calcium 4 EDTA (CalVer ® 2) 10-160 mg/L CaCO 3 0.0800M EDTA 1436401 14.39 

Hardness, Calcium 4 EDTA (CalVer ® 2) 100-4000 mg/L CaCO 3 0.800M EDTA 1439901 14.39 

Hardness, Total 5 EDTA (ManVer ® 2) 10-160 mg/L CaCO 3 0.0800M EDTA 1436401 

Hardness, Total 5 EDTA (ManVer ® 2) 100-4000 mg/L CaCO 3 0.800M EDTA 1439901 

Sulfite 6 Iodate-Iodide 0-800 mg/L SO 2- 

3 0.3998N KIO - 3 KI 1496101 13.95 

1 Equivalent to Standard Method 2310 B (4a), 18th, 19th, 20th, and online edition. 

2 Equivalent to Standard Methods 2320 B, 18th, 19th, 20th, and online edition. 

3 Equivalent to Standard Methods 4500-Cl C, 18th, 19th, 20th, and online edition. 

4 Equivalent to Standard Methods 3500-Ca D, 18th, 19th, 20th, and online edition. 

5 Equivalent to Standard Methods 2340 B or C, 18th, 19th, 20th, and online edition. 

6 Equivalent to Standard methods 4500-SO3 B, 18th, 19th, 20th, and online edition. 

* Not for delivery to Connecticut. 

Continued on next page. 



91

Digital Titrator Cartridges and Reagent Sets 


DT Cartridge Cartridge Reagent Set Set 

Parameter Method Range Titrant Prod. No. Price Prod. No. Price 

Acid-Base Phenolphthalein End Point 1-10 meq/L Acid 1.600N NaOH 1437901 

Acid-Base Phenolphthalein End Point 10-4000 meq/L Acid 8N NaOH 1438101 

Acid-Base Phenolphthalein End Point 1-10 meq/L Base 1.600N H 2 SO 4 1438901 

Acid-Base Phenolphthalein End Point 10-4000 meq/L Base 8.00N H 2 SO 4 1439101 

Acid-Base Phenolphthalein End Point 10-4000 meq/L Base 8.00N HCl 1439001 

Acidity Methyl Orange 10-160 mg/L CaCO 3 0.1600N NaOH 1437701 15.55 2272800 $58.65 

Acidity Phenolphthalein 10-160 mg/L CaCO 3 0.1600N NaOH 1437701 15.55 2272800 58.65 

Acidity Methyl Orange 100-4000 mg/L CaCO 3 1.600N NaOH 1437901 15.25 2272800 58.65 

Acidity Phenolphthalein 100-4000 mg/L CaCO 3 1.600N NaOH 1437901 15.25 2272800 58.65 

Alkalinity Phenolphthalein 10-160 mg/L CaCO 3 0.1600N H 2 SO 4 1438801 2271900 

Alkalinity Phenolphthalein 100-4000 mg/L CaCO 3 1.600N H 2 SO 4 1438901 2271900 

Alkalinity, Total Bromcresol/Methyl Red 10-160 mg/L CaCO 3 0.1600N H 2 SO 4 1438801 13.95 2271900 51.35 

Alkalinity, Total Bromcresol/Methyl Red 100-4000 mg/L CaCO 3 1.600N H 2 SO 4 1438901 14.15 2271900 51.35 

Aqua Ammonia Colorimetric pH Endpoint 5-35% NH 3 8.00N H 2 SO 4 1439101 2930500 

Carbon Dioxide Phenolphthalein 10-100 mg/L CO 2 0.3636N NaOH 1437801 15.25 2272700 41.09 

Carbon Dioxide Phenolphthalein 100-1000 mg/L CO 2 3.636N NaOH 1438001 15.25 2272700 41.09 

Chelant, Free Magnesium Chloride 0-20 mg/L CaCO 3 0.0800M MgCl 2 2062501 

Chelant, Total Bismuth Nitrate 0-40 mg/L as Na 4 EDTA 0.0200M Bi(NO 3 ) 3 2434501 

Chloride Mercuric Nitrate 10-160 mg/L Cl - 0.2256N Hg(NO 3 ) 2 1439301* 16.80 2272600 63.05 

Chloride Silver Nitrate 10-100 mg/L Cl - 0.2256N AgNO 3 1439601 15.75 2288000 60.00 

Chloride Silver Nitrate 100-10000 mg/L Cl - 1.128N AgNO 3 1439701 15.25 2288000 60.00 

Chloride Mercuric Nitrate 100-8000 mg/L Cl - 2.256N Hg(NO 3 ) 2 92101* 16.49 2272600 63.05 

Chlorine, Free Amperometric, Forward 0-1000 µg/L Cl 2 0.00564N PAO 199901 

Chlorine, Free DPD-FEAS 0-3.00 mg/L Cl 2 0.00564N FEAS 2292301 2445300 

Chlorine, Total Amperometric, Back 6-1000 µg/L Cl 2 0.028N Iodine 2333301 15.10 

Chlorine, Total Amperometric, Forward 0-1000 µg/L Cl 2 0.00564N PAO 199901 14.50 

Chlorine, Total DPD-FEAS 0-3.00 mg/L Cl 2 0.00564N FEAS 2292301 12.30 2445300 49.70 

Chlorine, Total Iodometric 1-400 mg/L Cl 2 0.02256N Na 2 S 2 O 3 2409101 14.60 

Chlorine, Total Iodometric 20-2000 mg/L Cl 2 0.113N Na 2 S 2 O 3 2267301 14.60 2272500 55.10 

Chlorine, Total Iodometric 2000-70000 mg/L Cl 2 2.00N Na 2 S 2 O 3 1440101 15.25 2444800 78.80 

Chromate Iodometric 20-400 mg/L CrO 2- 

4 0.2068N Na 2 S 2 O 3 2267601 2272400 

Hardness, Calcium EDTA (CalVer ® 2) 1-16 G.d.h. 0.1428M EDTA 1496001 15.45 2447300 36.35 

Hardness, Calcium EDTA (CalVer ® 2) 10-200 G.d.h. 0.714M EDTA 1495901 15.45 2447400 47.99 

Hardness, Calcium EDTA (CalVer ® 2) 10-160 mg/L CaCO 3 0.0800M EDTA 1436401 14.39 2447200 39.15 

Hardness, Calcium EDTA (CalVer ® 2) 100-4000 mg/L CaCO 3 0.800M EDTA 1439901 14.39 2447500 39.15 

Hardness, Total EDTA (ManVer ® 2) 1-16 G.d.h. 0.1428M EDTA 1496001 2447800 

Hardness, Total EDTA (ManVer ® 2) 10-200 G.d.h. 0.714M EDTA 1495901 2447900 

Hardness, Total EDTA (ManVer ® 2) 10-160 mg/L CaCO 3 0.0800M EDTA 1436401 2448000 

Hardness, Total EDTA (ManVer ® 2) 100-4000 mg/L CaCO 3 0.800M EDTA 1439901 2448100 

Hardness, Total, EDTA (CalVer ® 2 & ManVer ® 2) 1-16 G.d.h. 0.1428M EDTA 1496001 15.45 

Sequential 

Hardness, Total, EDTA (CalVer ® 2 & ManVer ® 2) 10-200 G.d.h. 0.714M EDTA 1495901 15.45 2448500 72.19 

Sequential 

Hardness, Total, EDTA (CalVer ® 2 & ManVer ® 2) 10-160 mg/L CaCO 3 0.0800M EDTA 1436401 14.39 2448600 72.39 

Sequential 

Hardness, Total, EDTA (CalVer ® 2 & ManVer ® 2) 100-4000 mg/L CaCO 3 0.800M EDTA 1439901 14.39 2448700 66.55 

Sequential 

Hypochlorite Iodometric Method 50-150 g/L Cl 2 2.26N Na 2 S 2 O 3 2686901 2687000 

Iron EDTA 10-100 mg/L Fe 0.0716M EDTA 2081701 15.05 2449200 96.39 

Iron EDTA 100-1000 mg/L Fe 0.716M EDTA 2081801 15.90 2449300 96.39 

Nitrite Ceric Ion Titration 100-2500 mg/L NaNO 2 0.5 N Ceric Ion 2270701 

Oxygen, Dissolved Azide mod. of Winkler Method 1-10 mg/L DO 0.200N Na 2 S 2 O 3 2267501 14.95 2272200 65.15 

Oxygen, Dissolved Azide mod. of Winkler Method 10-100 mg/L DO 2.00N Na 2 S 2 O 3 1440101 15.25 

Salinity Mercuric Nitrate 0-100 ppt Salinity 2.570N Hg(NO 3 ) 2 2393701* 

Sulfite Iodate-Iodide 0-800 mg/L SO 2- 

3 0.3998N KIO - 3 KI 1496101 13.95 2272300 41.36 

Volatile Acids Phenolphthalein End Point 100-2400 mg/L CH 3 COOH 0.9274N NaOH 1484201 2460200 

*Not for delivery to Connecticut. 

92 

800-227-4224 




Sample Preparation 

See Inside! 

• Lachat MICRO DIST now EPA approved 

for reporting of cyanide in drinking water 

and wastewater! 

See page 99. 

• NEW Xenosep Oil and Grease System— 

EPA-approved method! 

See page 100. 

…and Much More! 

Sample Preparation

DRB 200 Dry Thermostat Reactor 


The simple solution for standard and special digestions. 

• Easy-to-use and fast 

• Safe to operate 

• Accommodates a variety of test vials 

• Optional dual block for simultaneous digestions 

The Hach DRB 200 Dry Thermostat Reactor provides unique one-key 

operation. Programs for Hach procedures with digestion are 

preprogrammed into the instrument. And it’s fast—the block heats 

from ambient to 150°C in less than 10 minutes. Safe to operate. The 

fully insulated heater block of the DRB 200 reactor prevents skin 

contact with the heater block. Temperature safeguards are provided 

to prevent overheating. The lids are transparent and lock to deter 

premature checking of the progress of the reaction. And the reactor 

will emit an audible signal and automatically shutdown at the end of 

the run. Optional dual block for simultaneous digestions. Two heat 

blocks in the DRB200 reactor give the operator independent control 

of two temperatures and durations. Use this option to run two 

programs at the same time. 

Applications 


Programmable Temperature Range 

37 to 165°C (99 to 329°F) 

Operating Temperature 

10 to 45 °C (50 to 113°F) 

Programmable Timer Range 

0 to 480 minutes 

Heating Rate 

Ambient to 150°C in 10 minutes 

Temperature Stability 

±2°C 

Stored Programs 

COD 150°C 120 minutes 

TOC 105°C 120 minutes 

Fixed 100, 105, 30, 60, 

150, 165°C 120 minutes 


100 to 240 Vac, 50/60 Hz, 600 VA 

Compliance 

CE, GS, cTUVus 

Dimensions 

25.0 x 14.5 x 31.0 cm (9.8 x 5.7 x 

12.2 in.) 

Temperature (°C) 

Number of Vial Wells 

Single block: 

9 16-mm and 2 20-mm or 15 16-mm 

Dual block: 

21 16-mm and 4 20-mm 

Weight 

Single block: 2 kg (4.4 lbs.) 

Dual block: 2.8 kg (6.2 lbs.) 

Warranty 

Two-year 

Time (minutes) 

COD 150 120 

TOC 105 120 

ISO-TOC 

Metals, suspended and/or complexed 100 60 

(lead, cadmium, copper, iron, nickel, zinc) 

Total Chromium 100 60 

Total Nitrogen 100/105* 60/30 

Total Phosphate 100/105* 60/30 

Trihalomethanes 100 8 

User-specific programs 37 to 165 1 to 480 

*Digestion temperature and time depend on test method and reagents selected. 


DIGITAL REACTORS 

Most versatile models support either 13mm* or 16mm Hach 

chemistry vials. 


LTV082.53.30001 9 vials x 16mm + 2 vials x 20mm $651.00 

(single block) 115 Vac 

LTV082.53.40001 15 vials x 16mm 651.00 


LTV082.53.42001 21 vials x 16mm + 4 vials x 20mm 950.00 

(dual block) 115 Vac 





LTV082.52.40001 15 vials x 16mm 651.00 


*Use reactor adapters to adapt 16mm vial wells to the 13mm TNTplus vials. 

New DRB200 reactors support only the 13mm diameter TNTplus vials. 

DRB200-01 9 vials x 13mm + 2 vials x 20mm 651.00 
















REACTOR ADAPTERS 

These aluminum tubes are inserted into the 16mm vial wells of 

existing reactors, to adapt them to the 13mm TNTplus vials. The 

adapters can be removed (once the heater block has cooled) if the 

customer needs to use 16mm vial chemistries. 

2895805 Reactor Adapter, 16mm to 13mm, 5/pk 11.69 

HHA155 Reducing Adapter for DRB200, 20 > 16 mm 12.10 

96 

800-227-4224 


Digesdahl ® Digestion Apparatus 

Cut digestion time to 10 minutes! 

• Accurate, reliable, fast results 

• Eliminates metal catalysts 

• Very low reagent use 

• No fume hood required 

Cut digestion time to 10 minutes with the patented Digesdahl 

Digestion Apparatus. Use the Digesdahl to determine Kjeldahl 

nitrogen (crude protein), phosphorus, calcium, potassium, iron, 

copper, magnesium, manganese, lead, zinc, cadmium, and chromium 

in a variety of solid and liquid samples. 

The system uses sulfuric acid and concentrated hydrogen peroxide 

to rapidly digest organic materials. Quantitative dilution directly in 

the digestion flask allows fast preparation for analyses by 

photometric or other methods. 


A water aspirator purges reaction products. 

Each Digesdahl unit includes two digestion flasks, a fractionating 

column and capillary funnel, an aspirator, finger cots, safety glasses, 

and assembly instructions. 


2313020 Digesdahl Digestion Apparatus $1,115.00 

115 Vac, 50/60 Hz 

2313021 Digesdahl Digestion Apparatus 1,115.00 

230 Vac, 50/60 Hz 

5004000 Safety Shield 437.00 

2220038 Hydrogen Peroxide Pour-out Dispenser, 118.00 

with flask, dispenses 10 mL 

STANDARDS 

2277924 Ammonium p-Toluenesulfonate, 36.29 

7.402% N, 25 g. 

2278024 Glycine p-Toluenesulfonate, 38.55 

5.665% N, 25 g. 

2278124 Nicotinic Acid p-Toluenesulfonate, 36.65 

4.743% N, 25 g. 

2277800 Nitrogen Primary Standard Set, for checking 115.00 

accuracy of crude protein test (TKN), contains 

one bottle of each of the above standards and 

an instruction booklet. 

REAGENTS 

97949 Sulfuric Acid, ACS, 500 mL 25.05 

2119649 Hydrogen Peroxide, 50%, 490 mL 27.00 



115 or 230 Vac, 50/60 Hz, 250 watts 

Control 

Variable from 25-250 watts 

Construction 

Corrosion-resistant, epoxy-painted metal with composition heater base 

Dimensions 

14 x 16.5 x 33.6 cm (5.5 x 6.5 x 13.25") Requires total height clearance of 

approximately 50 cm (20") when assembled 

Net Weight 

3.85 kg (8.5 lb) 

Shipping Weight 

4.8 kg (10.6 lb) 




97

Distillation Apparatus 


Fast set-up for sample pretreatment. 

General Purpose Assembly 

Arsenic Assembly, Complete 

(shown with required General Purpose Set) 

THREADED CONNECTOR 

THERMOMETER 

GAS SCRUBBER 

CAP 

THERMOMETER 

CONNECTOR 

J-TUBE 

CONDENSER 

THERMOMETER 

THISTLE TUBE 

THERMOMETER 

CONNECTOR 

DISTILLATION 

FLASK 

J-TUBE 

TO ASPIRATOR 

CABLE TIE 

GAS BUBBLER 

50-mL CYLINDER 

DISTILLATION FLASK 

Cyanide Assembly, Complete 

(shown with required General Purpose Set) 

50 mL 

CYLINDER 

FLOW 

METER 

THREADED CONNECTOR 

GAS BUBBLER 

VACUUM TUBE 

TO ASPIRATOR 

FILTER FLASK 

• Distillation sets include everything you need to satisfy 

EPA distillation requirements 

• Easy to set up because you only receive the parts you need 

• Illustrated, step-by-step procedures simplify distillation 

General Purpose Distillation Apparatus Set 

Adapts to a variety of test needs including all wastewater and water 

methods requiring sample pretreatment by distillation. Applications 

include fluoride, ammonia-nitrogen, phenols, selenium, volatile acids, 

and albuminoid nitrogen. Heating apparatus, sold separately, is 

needed for distillation. 

Arsenic Distillation Apparatus Set 

Used together with the General Purpose Distillation Set 

(Prod. No. 2265300) when arsenic is to be determined. Heating 

apparatus (not included) is also required. 

Cyanide Distillation Apparatus Set 

Used together with the General Purpose Distillation Set 

(Prod. No. 2265300) when cyanide is to be determined. Heating 

apparatus and a laboratory jack (neither are included) are also 

required. 

Heater and Support Apparatus 

For use with Hach Distillation Glassware Sets. Includes Rotamantle 

Heater (Prod. No. 2273700), clamps, clamp holder, and support rod. 

Laboratory Platform Jack 

Loading platform, 15 x 15 cm (6 x 6"). Lifts 15 kg (33 lb) to a 28 cm 

(11") height maximum. 

Distillation Apparatus Manual 

Hach has updated and improved the operator’s and procedures 

manual for the Distillation Apparatus. Hach’s Third Edition Distillation 

Apparatus Manual includes step-by-step illustrations for the 

distillation procedure. Each procedure identifies whether sample 

preparation is appropriate for subsequent colorimetric and/or 

electrochemical measurement. The manual also includes two 

procedures for ammonia. (Manual is included with the General 

Purpose Distillation Apparatus Set.) 


2265300 General Purpose Distillation Apparatus Set $485.00 

(Heater and support apparatus also required) 

2265400 Arsenic Set (General Purpose Set and 219.00 

Heater and Support Apparatus also required) 

2265800 Cyanide Set (General Purpose Set and 319.00 

Heater and Support Apparatus also required) 

ACCESSORIES 

2264806 Connector (20-400 to 20-400), J-tube, 6/pk 94.85 

2274000 Connector (13-425), Thermometer 20.49 

2274106 Connector (24-400 to 24-400), Cylinder,6/pk 184.00 

2265308 Distillation Procedures Manual 12.25 

2274400 Heater and Support Apparatus 1,408.00 

115 Vac, 60 Hz 

2274402 Heater and Support Apparatus, 1,449.00 

230 Vac, 50 Hz 

2274300 Laboratory Platform Jack 182.00 

2095926 Thermometer, mercury 20.09 

-10 to 260°C (20 to 500°F) 

See page 340 for individual replacement parts. 

98 

800-227-4224 


MICRO DIST ® 

A revolution in distillation technology. 

With the MICRO DIST system from Lachat Instruments, you can now 

distill up to 21 samples for cyanides, sulfide and ammonia in 30 

minutes; and phenolics and tritium in 90 minutes. MICRO DIST 

eliminates the need for bulky, expensive, clumsy and time-consuming 

glassware-based distillation units while accommodating liquid and 

solid samples. 

See page 94 for ordering information. 


Dimensions (W x D x H) 

72 x 17 x 33 cm (28 x 7 x 13 in.) 

Electrical 

110–120 Vac, 11A; 220–240 Vac, 5A 


Now 

with full 

EPA Approval 

for reporting 

of cyanide in 

drinking water 

and 

wastewater. 


For Saving Time, Money, and Reducing Complexity, MICRO DIST Outshines Other Techniques 

Time Comparisons 

MICRO DIST MIDI MACRO 

Setup Time (min.) 15 (21 samples) 80 (10 samples) 240 (10 samples) 

Warm-up Time (min.) 15 15 60 

Distillation Time (min.) 30 (21 samples) 60 (10 samples) 60 (10 samples) 

Cool-down Time (min.) 0 15 30 

Clean-up & tear-down time (min.) 5 60 60 

Total (min.) 65 230 450 

Other Benefits 

MICRO DIST MIDI MACRO 

Fume hood required No Yes Yes 

Bench area needed (sq. in.) 24 (21 samples) 120 (10 samples) 144 (5 samples) 

Breakable ground-glassware No Yes Yes 

Sample volume required (mL) 6 50 500 

Sample waste volume after distillation (mL) 4 ~48 ~480 

Purge cylinder gas required No Yes Yes 

Running cooling water required No Yes Yes 

MICRO DIST Makes Distillation Easy! 

1. Place 6 mL of 

sample into the 

Sample Tube. 

2. Attach the Sample 

Tube to the Collector 

Tube. 

3. Place the tube 

assembly into the 

heating block and 

heat the samples for 

30 minutes. 

4. Remove each tube 

from the block and 

disconnect the 

Sample Tube from 

the Collector Tube. 

5. Snap the Collector 

Tube in half. 

6. Bring the Distillate in 

the Collector Tube 

up to volume with DI 

water. 



99

Xenosep ® Oil and Grease Systems 


At last, an easy, EPA-approved method for oil and grease! 

Lab Stand and Clamp sold separately. 

EPA 

APPROVED 

METHOD 

Xenosep Solid-Phase Extraction (SPE) Systems offer the easiest and 

most cost effective way to test for Oil and Grease using EPA Method 

1664A. Fast, in-house results enable you to maintain control over 

your plant discharges in real time without the complications of the 

hexane LLE procedure. Xenosep SPE filters feature a unique triple 

layer that prevents premature clogging and flows 10 times faster than 

typical SPE filters. 

It is now possible to easily achieve reliable, consistent Oil and Grease 

results and decrease your sample turnaround time. A free training 

video on CD is included with each Starter Kit to show your lab how 

to perform EPA Method 1664A by SPE. For more information on 

Xenosep SPE Systems, visit our website at www.hach.com/xenosep. 

Xenosep SPE Systems are available in convenient kits which 

include the components for 24 tests and all the glassware required 

to process them, one at a time. Replacement components are also 

available. 


2943231 Xenosep SPE Starter Kit $695.00 

without Solvent Recovery 

SELECT REPLACEMENT COMPONENTS (others available upon request) 

2943800 Xenomax SPE Consumables Kit 164.00 

(includes 24 SPE Filters, Pipets, and 

Sodium Sulfate Columns) 

2943300 SPE Filters, 1664A, 47 mm, 48/pk 190.00 

2943400 Pipets, Transfer, Polyethylene, 15 mL, 48/pk 15.45 

2943500 Inline Column with Sodium Sulfate, 10g, 48/pk 139.00 

2943600 Glass Wool Fibers 50 g 89.00 

2943701 EPA 1664A Standard, 1x30 mL, 4mg/mL 11.99 

2943702 EPA 1664A Standard, 1x10 mL, 4mg/mL 4.99 

2943226 Aluminum Pans, 105 mm, 100/pk 39.99 

2943227 Hi-Loft GFM Prefilters, 42 mm, 48/pk 129.99 

Need multiple sample processing capability or to recover the solvent 

Manifold sold separately. 

Xenosep Manifold Kits are available for a three position manifold and 

include components necessary to process three samples at a time. 


2943232 3 Place Manifold Kit, Glassware $995.00 

2946707 3 Place Manifold, Stainless Steel 995.00 

Lab Stand and Clamp sold separately. 

Xenosep Starter Kit with solvent recovery is the same as above 

except it includes a distillation assembly and a total of 7 flat-sided 

boiling flasks. 


2943200 Starter Kit with Solvent Recovery $995.00 

100 

800-227-4224

Laboratory & Field Instruments: Meters & Probes - ECA Service

Create successful ePaper yourself

Delete template?

Save as template?