USA Catalog 2009-2010 - Lumascape
USA Catalog 2009-2010 - Lumascape
USA Catalog 2009-2010 - Lumascape
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Updated: 22 August <strong>2009</strong><br />
Exterior Lighting <strong>Catalog</strong><br />
<strong>2009</strong> - <strong>2010</strong><br />
<strong>USA</strong>
Ingrade<br />
LS343<br />
LS853<br />
LS853LED<br />
LS843<br />
LS363<br />
pg 9<br />
pg 17<br />
LED<br />
pg 17<br />
pg 25<br />
pg 31<br />
LS393<br />
LS393LED<br />
LS333<br />
LS563LED (1W)<br />
LS563LED (3W)<br />
pg 39<br />
LED pg 39<br />
pg 47<br />
LED pg 50<br />
LED<br />
pg 50<br />
LS553LED-1<br />
LS553LED-2<br />
LS553LED-4<br />
LS553LED-8<br />
LS793LED<br />
LED pg 52<br />
LED pg 52<br />
LED pg 52<br />
LED pg 52<br />
LED<br />
pg 54<br />
Spotlight & Floodlight<br />
LS452<br />
LED<br />
Option<br />
LS461<br />
pg<br />
56<br />
LS432<br />
LED<br />
Option<br />
LS411<br />
pg 57<br />
LS422<br />
LED<br />
Option<br />
LS341<br />
pg 57<br />
LS421<br />
LED<br />
Option<br />
LS361<br />
pg 58<br />
LS431<br />
LED<br />
Option<br />
pg 59<br />
pg 60<br />
LED<br />
Option<br />
pg 62<br />
pg 64<br />
pg 66<br />
Underwater<br />
LS333ANS<br />
LS275<br />
LS265LED<br />
LS265A-1<br />
LS265A-3<br />
LED<br />
Option<br />
pg<br />
69<br />
LED<br />
Option<br />
pg 70<br />
LED<br />
pg 71<br />
pg 72<br />
pg 72<br />
LS475A<br />
LS345<br />
LS365<br />
pg 73<br />
pg 74<br />
pg 76<br />
Downlight<br />
LS454<br />
LED<br />
Option<br />
pg 79
Wallmount<br />
LS471<br />
LS371<br />
LS381A<br />
LS441<br />
LS491<br />
LED<br />
Option<br />
pg 81<br />
LED<br />
Option<br />
pg 82<br />
pg 83<br />
pg 84<br />
pg 84<br />
LS511A-1<br />
LS521A-1<br />
LS731LED<br />
LS741LED<br />
LS751LED<br />
pg 85<br />
pg 85<br />
LED<br />
pg 86 LED<br />
pg 86<br />
LED<br />
pg 87<br />
Bollard &<br />
Pathway<br />
LS482<br />
LS582<br />
LS592<br />
pg 90<br />
pg 92<br />
pg 93<br />
Landscape<br />
LS112A<br />
LS132A<br />
LS162<br />
LS172<br />
LS192<br />
pg 95<br />
pg 95<br />
pg 96 pg 96<br />
pg 97<br />
LS201A-3<br />
LS121A-21A-2<br />
LS101A<br />
LS321A<br />
LS294<br />
pg 98<br />
pg 98<br />
pg 99<br />
pg 99<br />
pg 100
2<br />
Symbol Index<br />
UL Listed<br />
This mark indicates compliance with<br />
both Canadian and US requirements<br />
in accordance with UL standards.<br />
IP<br />
Ingress Protection Rating<br />
Degrees of protection provided<br />
against the intrusion of solid objects,<br />
dust, accidental contact and water.<br />
Refer to page 103.<br />
IK<br />
Impact Rating<br />
Degrees of protection by enclosures<br />
for electrical equipment against<br />
external mechanical impact. Refer<br />
to page 103.<br />
PureOptics<br />
Glass dichroic reflector system for<br />
superior light output and control.<br />
Refer to page 6.<br />
HumanTouch<br />
This technology limits glass surface<br />
temperatures to safe levels, as well<br />
as controlling internal temperatures.<br />
Refer to page 4.<br />
OptiClear<br />
A glass with very high optical purity<br />
and high load strength.<br />
GripGlass<br />
Textured treatment of OptiClear<br />
glass for ingrade luminaires to<br />
minimize the risk of slipping.<br />
MicroAntiLeach<br />
Proprietary sealing process eliminating<br />
moisture ingress through the cable.<br />
Refer to page 5.<br />
ElectroPolishPlus<br />
Proprietary surface treatment for<br />
stainless steel luminaires, enhancing<br />
corrosion resistance. Refer to page 88.
Contents<br />
Quick Reference<br />
3<br />
LED<br />
MH<br />
PAR<br />
Ingrade Mounting Page<br />
LS343 Ingrade 9 ●●●● ● ●<br />
LS853 Ingrade 17 ●●<br />
LS843 Ingrade 25 ●<br />
LS363 Ingrade 31 ●● ● ●<br />
LS393 Ingrade 39 ● ●<br />
LS333 Ingrade 47 ●<br />
LS563LED Vedi Ingrade 50 ●<br />
LS553LED Via Ingrade 52 ●<br />
LS793LED Ingrade 54 ●<br />
LED<br />
MH<br />
PAR<br />
Spotlight & Floodlight Mounting Page<br />
LS452 Centria Semi Recessed 56 ●●<br />
LS422 Centria Spike 57 ●●<br />
LS432 Centria Surface 57 ●●<br />
LS421 Centria Surface 58 ●●<br />
LS431 Centria Surface 59 ●●<br />
LS461 Omnio Surface, Spike, Pole, Signage 60 ●●<br />
LS411 Omnio Mini Surface, Spike, Pole, Signage 62 ●● ●<br />
LS341 Floodlight Surface 64 ●●●● ● ●<br />
LS361 Floodlight Surface 76 ●● ● ●<br />
LED<br />
MH<br />
PAR<br />
Underwater Mounting Page<br />
LS333ANS Swimming Pool Wet Niche 69 ● ●<br />
LS275 Star II Surface 70 ● ●<br />
LS265LED Tristar Surface 71 ●<br />
LS265A-1 Tristar Surface 72 ●<br />
LS265A-3 Halostar Surface 72 ●<br />
LS475A Pond Monster Surface 73 ●<br />
LS345 Floodlight Surface 74 ●●●● ● ●<br />
LS365 Floodlight Surface 76 ●● ● ●<br />
LED<br />
MH<br />
PAR<br />
Downlight Mounting Page<br />
LS454 Aura Surface 79 ● ●<br />
LED<br />
MH<br />
PAR<br />
Wallmount Mounting Page<br />
LS471 Centria Surface 81 ●●<br />
LS371 Boulevard Surface 82 ● ●<br />
LS381A Melia II Recessed Wall 83 ●<br />
LS441 Wedge Surface 84 ●<br />
LS491 Moda Surface 84 ●<br />
LS511A-1 Alura Surface 85 ●<br />
LS521A-1 Eterna Surface 85 ●<br />
LS731LED Portico Surface 86 ●<br />
LS741LED Piazza Surface 86 ●<br />
LS751LED Villa Surface 87 ●<br />
LED<br />
MH<br />
PAR<br />
Bollard & Pathway Mounting Page<br />
LS482 Balitza Surface 90 ●● ●●<br />
●<br />
LS582 Balitza Mini Surface 92 ● ● ●<br />
LS592 Balitza Micro Surface 93 ●<br />
LED<br />
MH<br />
PAR<br />
Landscape Mounting Page<br />
LS112A Boronia Spike 95 ●<br />
LS132A Melaleuca Spike 95 ●<br />
LS162 Waratah Spike 96 ●●<br />
●<br />
LS172 Poinsettia Spike 96 ●●●<br />
LS192 Grevillea Spike 97 ●<br />
LS201A-3 Hakea Surface 98 ●<br />
LS121A-2 Cassia Surface 98 ●<br />
LS101A Acacia Surface 99 ●<br />
LS321A Pagoda Surface 99 ●<br />
LS294 Firefly Pendant 100 ●●<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
MH R111<br />
CFL<br />
CFL-SB<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
CFL-SB<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
CFL-SB<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
CFL-SB<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
SB-CFL<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
CFL-SB<br />
HPS<br />
MR16<br />
HAL<br />
INC<br />
CFL-SB<br />
HPS<br />
MR16 MR16<br />
HAL<br />
INC
4<br />
TM<br />
The HumanTouch system not only guarantees<br />
the optimal performance of <strong>Lumascape</strong> luminaires,<br />
but it also reduces external glass temperatures to<br />
human friendly levels for public spaces where<br />
safety is the priority.<br />
HumanTouch ensures the temperature of all<br />
the internal components are actively maintained<br />
well below their maximum safe operating<br />
temperatures. Should abnormal environmental<br />
circumstances threaten to overheat the luminaire,<br />
our dual protection system simply turns the<br />
luminaire off.<br />
HumanTouch is yet another innovative<br />
concept designed to increase the quality of your<br />
<strong>Lumascape</strong> product. Look for the logo below on<br />
the <strong>Lumascape</strong> products that can contain the<br />
advanced HumanTouch technology.<br />
Visible light<br />
Infra red (heat)<br />
This diagram demonstrates the concept of HumanTouch<br />
in ingrade luminaires equipped with PureOptics reflector.<br />
HumanTouch lens<br />
Luminaire body<br />
Installation medium<br />
Glass Temperatures For Surface Mounted Luminaires<br />
HumanTouch temperatures for surface mounted luminaires are measured in a controlled laboratory environment at an ambient temperature of<br />
77ºF (25ºC), in still air, and mounted to a highly insular surface. The inclusion of any other accessory may vary surface temperatures from those<br />
listed. Consult factory for details.<br />
Glass Temperatures For Ingrade Luminaires - Quick Reference<br />
HumanTouch glass temperatures for ingrade luminaires are measured in a controlled laboratory environment at an ambient temperature of 77ºF<br />
(25ºC), in still air, and installed in a highly insular substrate. The inclusion of any other accessory may vary glass temperatures from those listed.<br />
Consult factory for details.<br />
All <strong>Lumascape</strong> LED products are HumanTouch compliant<br />
Luminaire<br />
Lamp<br />
Control Gear<br />
Location<br />
Description<br />
Optical System<br />
Reflector<br />
Wattage<br />
HumanTouch<br />
Compatibility<br />
Glass Temperature<br />
HumanTouch<br />
Accessory Required<br />
LS343 MH / HIT Integral Adjustable PureOptics 39W ≤141°F (≤61°C) Yes<br />
70W ≤149°F (≤65°C) Yes<br />
Aluminum 39W ≤149°F (≤65°C) Yes<br />
70W ≤149°F (≤65°C) Yes<br />
Fixed Asymmetric 39W ≤149°F (≤65°C) Standard inclusion<br />
70W ≤149°F (≤65°C) Standard inclusion<br />
CFL /TC-T Integral Fixed PureOptics 18W, 26W ≤117°F (≤47°C) Yes<br />
Aluminum 18W, 26W ≤140°F (≤60°C) Yes<br />
Asymmetric 18W, 26W ≤140°F (≤60°C) Standard inclusion<br />
CFL /TC-TEL Integral Fixed PureOptics 26W, 32W ≤131°F (≤55°C) Yes<br />
Aluminum 26W, 32W ≤140°F (≤60°C) Yes<br />
Asymmetric 26W, 32W ≤140°F (≤60°C) Standard inclusion<br />
HPS / HSE Integral Fixed PureOptics 50W ≤145°F (≤63°C) Yes<br />
Adjustable Aluminum 50W ≤140°F (≤60°C) Yes<br />
70W ≤140°F (≤60°C) Yes<br />
LS363 MH / HIT Integral Adjustable Aluminum 20W ≤149°F (≤ 65°C) Standard inclusion<br />
MR16 Integral Adjustable -- 50W IRC ≤149°F (≤ 65°C) Yes<br />
CFL / TCT Integral Fixed Aluminum 18W, 26W ≤143°F (≤ 62°C) Yes<br />
LS393 MR16 Remote Adjustable -- 50W ≤149°F (≤65°C) Yes<br />
LS843 MH / HIT Integral Fixed Aluminum 20W ≤149°F (≤65°C) Standard inclusion<br />
LS853 MH / HIT Remote Fixed PureOptics 39W ≤149°F (≤65°C) Yes
5<br />
<strong>Lumascape</strong> ingrade and submersible luminaires are sealed and tested to IP68,<br />
which means that no air or water can enter or leave the enclosure after they<br />
have been properly installed. Considerable pressures build up within these<br />
sealed enclosures during the normal heating and cooling cycles. Any path to the<br />
atmosphere can soon lead to moisture ingress.<br />
Under pressure, air and therefore moisture can enter through any leak path into or<br />
out of the luminaire. Leak paths can include the supply cable, unless its conductors<br />
and insulation are totally sealed.<br />
<strong>Lumascape</strong> has developed a special process known as MicroAntiLeach. The<br />
incoming supply cables are completely sealed so that no air or moisture can enter<br />
the luminaire even with the pressures that are typically experienced within totally<br />
sealed luminaires.<br />
When you specify <strong>Lumascape</strong> luminaires with MicroAntiLeach you can be<br />
confident about the integrity of the enclosures.<br />
IP68 MicroAntiLeach<br />
cable gland<br />
Soldered cable strands<br />
block all moisture entry via<br />
conductor strands<br />
Resin filled gland blocks<br />
all moisture ingress into<br />
luminaire from between<br />
insulation layers
6<br />
advanced glass reflector technology<br />
available for LS343 LS853 LS461 LS341 LS345<br />
PureOptics Reflectors<br />
<strong>Lumascape</strong>’s advanced PureOptics reflectors are engineered to provide<br />
maximum efficiency and performance over a long service life.<br />
Precise and Efficient<br />
At the heart of the PureOptics system is a series of advanced German<br />
manufactured glass reflectors which are treated with a multi layered dichroic<br />
coating to provide exceptional reflectivity for the wavelengths within the visible<br />
spectrum. Internationally accredited NATA test laboratories confirm that the<br />
PureOptics reflectors achieve up to 15% more light output than leading<br />
aluminum reflectors.<br />
Accurate and Functional<br />
The PureOptics elliptical reflectors are designed to provide precise beam<br />
control. The reflectors project a convergent beam, dramatically reducing the cutoff<br />
experienced with parabolic reflectors when tilted. This combined with the<br />
accuracy of <strong>Lumascape</strong>’s direct drive tilting gimbal assembly enables accurate<br />
beam control.<br />
Deeper Wall Wash<br />
One of the advantages of the PureOptics reflectors are most easily<br />
demonstrated when used in wall washing applications. By utilizing the<br />
advantages available with the ellipsoidal reflector design, combined<br />
with the LS688 wall wash lens accessory, the light can be projected<br />
virtually to ground level without significant scalloping.<br />
Standard parabolic<br />
reflector<br />
with LS688<br />
wallwash lens accessory<br />
Compatible with HumanTouch<br />
The coating on the PureOptics reflectors has been optimized for each<br />
specified lamp. Visible light reflects off the reflectors surface while the infra-red<br />
rays pass back through the reflector thereby reducing the surface temperature<br />
of the glass. This cold mirror effect maximizes the reflected light whilst ensuring<br />
that HumanTouch temperatures can be achieved on the luminaire glass<br />
surface. Through careful design, sensitive internal component temperatures are<br />
maintained well below critical maximum operating limits.<br />
Built to Last<br />
The reflective surface of each reflector is protected by a clear and ultra tough<br />
titanium layer to provide many years of service without degradation of the<br />
reflective coating.
7<br />
OUR COMMITMENT<br />
Research into energy efficient lighting technology<br />
Reduced power consumption through use of<br />
efficient LED and low wattage lamp sources<br />
Wherever possible, products are manufactured<br />
from materials that can be recycled<br />
Easy to maintain, quality products that have a<br />
long service life<br />
Sound production techniques that conserve<br />
natural resources<br />
Equipment that is compliant with appropriate<br />
environmental standards<br />
www.lumascape.com<br />
At <strong>Lumascape</strong> we believe that progress does not<br />
have to come at the cost of the environment.<br />
We strive to make the world a better place for<br />
future generations.<br />
This attitude is reflected in everything we do –<br />
developing our products to a high standard and<br />
utilizing production methods that minimize our<br />
impact on the planet.<br />
<strong>Lumascape</strong> believes that energy efficient lighting<br />
is the way of the future and accordingly, we invest<br />
heavily in the development of LED and HID<br />
based luminaires.<br />
The use of high quality components and stringent<br />
quality control systems ensure that our luminaires<br />
have the longest service life possible sible – providing<br />
value for our customers and a commitment mitmen to…<br />
THE FUTURE OF OUR ENVIRONMENT
8ingrade
LS343<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
9<br />
IP68<br />
IK10<br />
The LS343 is a premium ingrade luminaire with outstanding performance. The<br />
housing is totally sealed and has a rating equivalent to submersion up to 30ft (10m)<br />
underwater. The glass surface is safe to touch when fitted with HumanTouch.<br />
Re-lamping and re-sealing on site is simple and robust. The choice of lamps and<br />
accessories makes the LS343 suitable for most uplighting applications.<br />
Specifications<br />
Lamp source<br />
39W, 70W MH / HIT T6 (G12)<br />
39W, 70W MH R111 (GX8.5)<br />
39W, 70W MH PAR 30 (E26 medium)<br />
18W CFL / TC-TEL (G24-q2)<br />
26W, 32W CFL / TC-TEL (G24-q3)<br />
50W, 70W HPS / HSE (E26 medium)<br />
75W max HAL R111 (G53)<br />
75W max PAR 20 - 38 (E26 medium)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation types Direct burial, landscapes, etc. Refer to pages 10-11<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit. Refer to pages 12-13<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
With OptiClear lens and pre-installation<br />
blockout (LS640-K)<br />
9 260 lb (4 200 kg) with OptiClear lens and<br />
pre-installation blockout (LS640-K)<br />
IK10 with OptiClear lens<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing desiccant<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural, 1 year electrical<br />
Refer to pages 14-15<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
39W, 70W MH / HIT T6<br />
18W, 26W CFL / TC-TEL<br />
50W HPS / HSE<br />
Refer to page 4 for more details<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS343 Round Flush Cover
(<br />
(<br />
(<br />
(<br />
(<br />
(<br />
(<br />
(<br />
10 LS343 Direct Burial<br />
Ingrade<br />
Why Use Direct Burial<br />
Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum<br />
heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilized<br />
landscapes.<br />
Cable Entry Options for Direct Burial<br />
Lens Options<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
Armored Cable MC & Splice Box<br />
Armored cable 2ft (0.6m) provides protection<br />
against damage to cable between luminaire and 4<br />
way splice box (included). Allows for loop in / loop<br />
out and flexibility of luminaire placement.<br />
Single Conduit Entry 0.5in NPT<br />
For 0.5in conduit installation with<br />
MicroAntiLeach cable entry<br />
c/w 6.5ft (2.0m) hook-up wire.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Direct Burial<br />
Use recessed cover for installation in soil,<br />
grass, pavers and other uneven surfaces<br />
where no cover overhang is desired.<br />
Use flush covers for installation in fine finished surfaces such as granite and<br />
marble. They can also be used in some suspended applications (decks, etc). The<br />
flush cover will conceal gaps between the luminaire and the surrounding surface.<br />
Recessed Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Round Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Square Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Ø 7.0in<br />
(178mm)<br />
Ø 7.0in<br />
(178mm)<br />
Ø 9.5in (240mm)<br />
Ø 10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
13.8in<br />
350mm )<br />
Ø 7.0in<br />
(178mm)<br />
0 .5in 14mm )<br />
13.8in<br />
350mm )<br />
0 .1in 3mm )<br />
0 .1in 3mm )<br />
0 .5in 14mm )<br />
13.8in<br />
350mm )<br />
0 .5in 14mm )<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)
LS343 Direct Burial<br />
Ingrade<br />
11<br />
Product<br />
Code<br />
LS343<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
25<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
MH / HIT T6 39W G12 226<br />
ECG* 70W G12 225<br />
MH / PAR 30 39W E26 med. 226<br />
ECG* 70W E26 med. 225<br />
MH / PAR 30 39W E26 med. 223<br />
MH / PAR 38 70W E26 med. 221<br />
MH R111 39W GX8.5 226<br />
MH R111 70W GX8.5 225<br />
PAR 20 - 38 75W max E26 med.<br />
120V only<br />
252<br />
HPS / HSE 50W E26 med. 231<br />
70W E26 med. 232<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG* 26W, 32W GX24q-3 262<br />
HAL R111 75W max G53 291<br />
* ECG - Electronic Control Gear<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Ideal for general use<br />
areas<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished B<br />
steel<br />
Brushed H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed V<br />
Brass Polished T<br />
A<br />
G<br />
X<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable PureOptics Narrow 10˚ AV 1<br />
Medium 18˚ AW 1<br />
Flood 48˚ AX 1<br />
Wide flood 60˚ AY 1<br />
Adjustable Aluminum Narrow 10˚ XV 2<br />
Fixed<br />
Asymmetric<br />
aluminum<br />
wallwash<br />
Medium 28˚ XW 2<br />
Flood 70˚ XX 2<br />
Wide flood 140˚ XY 2<br />
Very narrow XQ 4<br />
Wide XT 4<br />
Ultra wide XP 4<br />
Adjustable PAR 20 / 30 AR 3<br />
Fixed PAR 38 AS 3<br />
Fixed PureOptics Flood 110˚ AM 3<br />
Adjustable Aluminum Flood 140˚ XM 2<br />
Fixed PureOptics Flood 110˚ AL 3<br />
Adjustable Aluminum Flood 140˚ XL 2<br />
Fixed Asymmetric Flood XN 4<br />
Adjustable AJ 3<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 13.8in (350mm) 25<br />
For other body depths consult factory<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Side N<br />
Bottom<br />
Q<br />
Remote Side P<br />
Bottom<br />
R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz<br />
9<br />
Not suitable for PAR20 / PAR30 / PAR38 / HAL R111<br />
Other voltage options available - consult factory<br />
CABLE ENTRY<br />
Description<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
Code<br />
81<br />
82<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 14-15.
12 LS343 Pre-Installation Blockout<br />
Ingrade<br />
Why Use Pre-Installation Blockout<br />
This type of installation requires the LS640-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation before<br />
the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring to<br />
be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on the<br />
luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is<br />
completed. Pre-installation is required for all drive-over applications.<br />
Cable Entry Option for Pre-Installation Blockout<br />
Lens Options<br />
IP68 Connector & Splice Box<br />
The luminaire is fitted with an IP68<br />
connector, which attaches directly to the<br />
cable supplied with LS640-K, without the<br />
use of any tools. The cable is 1.8ft (0.56m)<br />
in length, and is factory assembled with a 4<br />
way splice box.<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Pre-Installation Blockout<br />
Flush covers for pre-installation use special<br />
seals and support bushes to ensure static loads<br />
up to 9 260 lb (4 200kg) are properly supported.<br />
In order to achieve this drive-over rating,<br />
OptiClear or GripGlass must be used.<br />
Pre-Installation Blockout Round Flush Cover<br />
• SS316: Polished • Brass: Polished<br />
• SS316: Brushed • Brass: Brushed<br />
Ø 7.0in<br />
(178mm)<br />
Ø 10.3in (262mm)<br />
Ø 7.5in (191mm)
LS343 Pre-Installation Blockout<br />
Ingrade<br />
13<br />
Product<br />
Code<br />
LS343<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
21<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
MH / HIT T6 39W G12 226<br />
ECG* 70W G12 225<br />
MH / PAR 30 39W E26 med. 226<br />
ECG* 70W E26 med. 225<br />
MH / PAR 30 39W E26 med. 223<br />
MH / PAR 38 70W E26 med. 221<br />
MH R111 39W GX8.5 226<br />
MH R111 70W GX8.5 219<br />
PAR 20 - 38 75W max E26 med.<br />
120V only<br />
252<br />
HPS / HSE 50W E26 med. 231<br />
70W E26 med. 232<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG* 26W, 32W GX24q-3 262<br />
HAL R111 75W max G53 291<br />
* ECG - Electronic Control Gear<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
Suitable for drive-over<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Suitable for drive-over<br />
Ideal for general use<br />
areas<br />
Not suitable for drive-over<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Code<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS640-K required - order separately<br />
A<br />
G<br />
X<br />
Code<br />
85<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable PureOptics Narrow 10˚ AV 1<br />
Medium 18˚ AW 1<br />
Flood 48˚ AX 1<br />
Wide flood 60˚ AY 1<br />
Adjustable Aluminum Narrow 10˚ XV 2<br />
Fixed<br />
Asymmetric<br />
aluminum<br />
wallwash<br />
Medium 28˚ XW 2<br />
Flood 70˚ XX 2<br />
Wide flood 140˚ XY 2<br />
Very narrow XQ 4<br />
Wide XT 4<br />
Ultra wide XP 4<br />
Adjustable PAR 20 / 30 AR 3<br />
Fixed PAR 38 AS 3<br />
Fixed PureOptics Flood 110˚ AM 3<br />
Adjustable Aluminum Flood 140˚ XM 2<br />
Fixed PureOptics Flood 110˚ AL 3<br />
Adjustable Aluminum Flood 140˚ XL 2<br />
Fixed Asymmetric Flood XN 4<br />
Adjustable AJ 3<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit 17.3in (450mm)<br />
(LS640-K)*<br />
21<br />
For other body depths consult factory<br />
* Must order LS640-K separately<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Bottom Q<br />
Remote Bottom R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz<br />
9<br />
Not suitable for PAR20 / PAR30 / PAR38 / HAL R111<br />
Other voltage options available - consult factory<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 14-15.
TM<br />
TM<br />
TM<br />
14 LS343 Accessories<br />
Ingrade<br />
1<br />
MH / HIT<br />
Adjustable PureOptics Reflector<br />
2<br />
AV / AW / AX / AY<br />
Stacking and order of accessories<br />
MH / HIT - HPS / HSE - CFL / TC-TEL<br />
Adjustable Aluminum Reflector<br />
XM / XL / XV / XW / XX / XY<br />
Stacking and order of accessories<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
OR<br />
OR<br />
OR<br />
OR<br />
LS6013<br />
Slatted louver<br />
LS688<br />
Wall wash lens<br />
LS6012<br />
Cross hatch louver<br />
LS625<br />
Cross hatch louver<br />
LS626<br />
Slatted louver<br />
LS668 - R / G / B / Y<br />
Dichroic color filter<br />
LS685<br />
Linear spreader lens<br />
LS653<br />
LS649<br />
OR OR OR<br />
LS689 - R / G / B / Y<br />
Dichroic color filters<br />
Not compatible with 70W<br />
LS6014<br />
Cylindrical louver<br />
LS6011<br />
Cross hatch louver<br />
LS690<br />
Prismatic lens<br />
with<br />
XM / XL<br />
Reflector<br />
with<br />
XV / XW / XX / XY<br />
Reflector<br />
LS692<br />
with<br />
AV / AW / AX /AY<br />
Reflector<br />
Other accessory stacking options may be available - consult factory<br />
Other accessory stacking options may be available - consult factory<br />
Cross section of gimbal assembly within luminaire body<br />
Cross sections of gimbal assemblies within luminaire body<br />
20 o 360 o<br />
20 o<br />
360 o<br />
20 o<br />
360 o<br />
20 o<br />
30 o 360 o<br />
30 o<br />
AV / AW / AX / AY<br />
Adjustable<br />
PureOptics<br />
Reflector<br />
XM<br />
Adjustable<br />
Aluminum<br />
Reflector<br />
XL<br />
Adjustable<br />
Aluminum<br />
Reflector<br />
XV / XW / XX / XY<br />
Adjustable<br />
Aluminum<br />
Reflector
TM<br />
TM<br />
LS343 Accessories<br />
Ingrade<br />
15<br />
3<br />
HPS / HSE - CFL / TC-T - PAR30 - PAR38 - R111<br />
Fixed PureOptics & PAR, Adjustable R111 & PAR<br />
4<br />
AM / AL / AJ / AR / AS<br />
Stacking and order of accessories<br />
MH / HIT - CFL / TC-T<br />
Fixed Aluminum Reflector<br />
XQ / XT / XP / XN<br />
Stacking and order of accessories<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
OR<br />
OR<br />
LS6013<br />
Slatted louver<br />
LS688<br />
Wall wash lens<br />
LS6012<br />
Cross hatch louver<br />
LS688<br />
Wall wash lens<br />
included as standard<br />
LS691<br />
Prismatic lens<br />
OR<br />
LS686 - R / G / B / Y<br />
Dichroic color filter<br />
LS691<br />
Prismatic lens<br />
OR<br />
LS686 - R / G / B / Y<br />
Dichroic color filter<br />
LS685<br />
Linear spreader lens<br />
AND / OR<br />
LS693<br />
HumanTouch Use only with<br />
AM 50W, AL 30W, AR 50W<br />
LS685<br />
Linear spreader lens<br />
with<br />
AM / AL<br />
Reflector<br />
AJ<br />
AR<br />
Other accessory stacking options may be available - consult factory<br />
AS<br />
with<br />
XQ / XT / XP<br />
Reflector<br />
with<br />
XN<br />
Reflector<br />
standard<br />
Other accessory stacking options may be available - consult factory<br />
Cross sections of gimbal assemblies within luminaire body<br />
Cross sections of gimbal assemblies within luminaire body<br />
360 o<br />
360 o<br />
AM<br />
Fixed<br />
PureOptics<br />
Reflector<br />
20 o 360 o<br />
20 o<br />
AL<br />
Fixed<br />
PureOptics<br />
Reflector<br />
10 o 360 o<br />
10 o<br />
360 o<br />
360 o<br />
360 o<br />
AJ<br />
Adjustable<br />
R111 Lamp<br />
AR<br />
Adjustable<br />
PAR20 / PAR30 Lamp<br />
AS<br />
Fixed<br />
PAR38 Lamp<br />
XQ / XT / XP<br />
Fixed<br />
Aluminum<br />
Reflector<br />
XN<br />
Fixed<br />
Aluminum<br />
Reflector
LS853 / LS853LED<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
17<br />
IP68<br />
IK10<br />
The LS853 is a full featured shallow depth ingrade luminaire. The LED luminaire<br />
features a built in driver, and measures only 7.1in (180mm) deep (in direct burial<br />
format). The ability to aim the luminaire ensures the most efficient light delivery can<br />
be set according to the site conditions.<br />
Specifications<br />
Lamp source<br />
LS853<br />
Lamp source<br />
LS853LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation types<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
39W, 70W MH / HIT T6 (G12)<br />
Remote control gear only<br />
Refer to pages 20-21<br />
20W LED (LUXEON K2)<br />
Integral driver<br />
Refer to pages 22-23<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
For RGB consult factory (Pre-install only)<br />
Suitable for wet locations<br />
IP68<br />
316 marine grade stainless steel<br />
Direct burial, landscapes, etc.<br />
Refer to page 20 for MH / HIT version<br />
Refer to page 22 for LED version<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit.<br />
Refer to page 21 for MH / HIT version<br />
Refer to page 23 for LED version<br />
With OptiClear lens and pre-installation<br />
blockout (LS6012-K / LS6102-K)<br />
9 260 lb (4 200kg) with OptiClear lens and<br />
pre-installation blockout (LS6012-K / LS6102-K)<br />
IK10 with OptiClear lens<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
MH / HIT 32°F to 122°F (0°C to 40°C)<br />
LED -4°F to 122°F (-20°C to +50°C)<br />
10 year structural, 1 year electrical<br />
Refer to page 20 for direct burial MH / HIT<br />
Refer to page 21 for pre-installation MH / HIT<br />
Refer to page 22 for direct burial LED<br />
Refer to page 23 for pre-installation LED<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W LED<br />
39W MH / HIT T6<br />
Refer to page 4 for more details<br />
LS853 Round Flush Cover<br />
LS853LED Round Flush Cover<br />
360 o<br />
20°<br />
20°<br />
Any luminaire can become hot - take care with appropriate use and placement
(<br />
(<br />
(<br />
(<br />
18 LS853 / LS853LED Direct Burial<br />
Ingrade<br />
For MH / HIT version of this product refer to page 20, for LED version refer to page 22<br />
Why Use Direct Burial<br />
Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum<br />
heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilized<br />
landscapes.<br />
Cable Entry Options for Direct Burial<br />
Lens Options<br />
Armored Cable MC & Splice Box<br />
Armored cable 2ft (0.6m) provides protection<br />
against damage to cable between luminaire and 4<br />
way splice box (included). Allows for loop in / loop<br />
out and flexibility of luminaire placement.<br />
Not available for RGB option<br />
Single Conduit Entry 0.5in NPT<br />
For 0.5in conduit installation with<br />
MicroAntiLeach cable entry<br />
c/w 6.5ft (2.0m) hook-up wire.<br />
Not available for RGB option<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Direct Burial<br />
Use recessed cover for installation in soil,<br />
grass, pavers and other uneven surfaces<br />
where no cover overhang is desired.<br />
Use flush covers for installation in fine finished surfaces such as granite and<br />
marble. They can also be used in some suspended applications (decks, etc). The<br />
flush cover will conceal gaps between the luminaire and the surrounding surface.<br />
Recessed Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Round Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Square Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Ø 7.0in<br />
(178mm)<br />
Ø 7.0in<br />
(178mm)<br />
Ø 7.0in<br />
(178mm)<br />
Ø 9.5in (240mm)<br />
Ø 10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
0 .1in 3mm )<br />
7 .1in (18 0mm )<br />
0 .5in 14mm )<br />
7 .1in (18 0mm )<br />
0 .5in 14mm )<br />
(<br />
0 .1in 3mm )<br />
7 .1in (18 0mm )<br />
0 .5in 14mm )<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)
LS853 / LS853LED Pre-Installation Blockout<br />
Ingrade<br />
19<br />
For MH / HIT version of this product refer to page 21, for LED version refer to page 23<br />
Why Use Pre-Installation Blockout<br />
This type of installation requires the LS6012-K or LS6052-K pre-installation kit (order separately) which acts as a blockout, and is intended for<br />
installation before the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for<br />
all wiring to be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted<br />
on the luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation<br />
is completed. Pre-installation is required for all drive-over applications.<br />
Cable Entry Option for Pre-Installation Blockout<br />
Lens Options<br />
IP68 Connector & Splice Box<br />
The luminaire is fitted with an IP68<br />
connector, which attaches directly to the<br />
cable supplied with LS6012-K or LS6052-K,<br />
without the use of any tools. The cable<br />
is 1.8ft (0.56m) in length, and is factory<br />
assembled with a 4 way splice box.<br />
For RGB option contact factory<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Pre-Installation Blockout<br />
Flush covers for pre-installation use special<br />
seals and support bushes to ensure static loads<br />
up to 9 260 lb (4 200kg) are properly supported.<br />
In order to achieve this drive-over rating,<br />
OptiClear or GripGlass must be used.<br />
Pre-Installation Blockout Round Flush Cover<br />
• SS316: Polished • Brass: Polished<br />
• SS316: Brushed • Brass: Brushed<br />
Ø 7.0in<br />
(178mm)<br />
Ø 10.3in (262mm)<br />
11.0in<br />
(28 0mm )<br />
Ø 7.5in (191mm)
TM<br />
TM<br />
20 LS853 Direct Burial (MH / HIT)<br />
Ingrade<br />
For LED version of this product refer to page 22<br />
Product<br />
Code<br />
LS853<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
28<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
4<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Ideal for general use<br />
areas<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished B<br />
steel<br />
Brushed H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed V<br />
Brass Polished T<br />
A<br />
G<br />
X<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Fixed PureOptics Narrow 10˚ AV<br />
Medium 18˚ AW<br />
Flood 48˚ AX<br />
Wide flood 60˚ AY<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 7.1in (180mm) 28<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Remote Side P<br />
Bottom<br />
R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
Other voltage options available - consult factory<br />
CABLE ENTRY<br />
Description<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
Code<br />
81<br />
82<br />
Symetrical Distribution<br />
Stacking and order of accessories<br />
Wallwash Distribution<br />
Narrow / Medium with Cut-Off Option<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
Only compatible with one<br />
additional accessory below<br />
LS6011<br />
Cross hatch louver<br />
With 39W only<br />
LS690<br />
Prismatic lens<br />
OR<br />
LS6029<br />
Linear spreader lens<br />
OR<br />
LS688<br />
Wall wash lens<br />
OR<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
OR<br />
LS692<br />
With 39W only<br />
LS689 - R / G / B / Y<br />
Dichroic color filters<br />
Not compatible with 70W<br />
LS685<br />
Linear spreader lens<br />
LS6014<br />
Cylindrical louver<br />
with<br />
AV / AW / AX /AY<br />
Reflector<br />
with<br />
AV / AW<br />
Reflector<br />
with<br />
AV / AW<br />
Reflector<br />
Other accessory stacking options may be available - consult factory
TM<br />
TM<br />
LS853 Pre-Installation Blockout (MH / HIT)<br />
Ingrade<br />
21<br />
For LED version of this product refer to page 23<br />
Product<br />
Code<br />
LS853<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
29<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
R<br />
Supply<br />
Voltage<br />
Code<br />
4<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Very high optical purity<br />
and load strength<br />
Suitable for drive-over<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Suitable for drive-over<br />
Code<br />
A<br />
G<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Fixed PureOptics Narrow 10˚ AV<br />
Medium 18˚ AW<br />
Flood 48˚ AX<br />
Wide flood 60˚ AY<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit 11.0in (280mm)<br />
(LS6052-K)*<br />
29<br />
For other body depths consult factory<br />
* Must order LS6052-K separately<br />
Borosilicate<br />
Glass<br />
Ideal for general use<br />
areas<br />
Not suitable for drive-over<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
X<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Remote Bottom R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
Other voltage options available - consult factory<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS6052-K required - order separately<br />
Code<br />
85<br />
Symetrical Distribution<br />
Stacking and order of accessories<br />
Wallwash Distribution<br />
Narrow / Medium with Cut-Off Option<br />
Only compatible with one<br />
additional accessory below<br />
LS6011<br />
Cross hatch louver<br />
With 39W only<br />
OR<br />
LS690<br />
Prismatic lens<br />
LS692<br />
With 39W only<br />
OR<br />
LS6029<br />
Linear spreader lens<br />
LS689 - R / G / B / Y<br />
Dichroic color filters<br />
Not compatible with 70W<br />
OR<br />
LS688<br />
Wall wash lens<br />
LS685<br />
Linear spreader lens<br />
OR<br />
LS6014<br />
Cylindrical louver<br />
with<br />
AV / AW / AX /AY<br />
Reflector<br />
with<br />
AV / AW<br />
Reflector<br />
with<br />
AV / AW<br />
Reflector<br />
Other accessory stacking options may be available - consult factory
TM<br />
22<br />
LS853LED Direct Burial (LED)<br />
Ingrade<br />
For MH / HIT version of this product refer to page 20<br />
Product<br />
Code<br />
LS853LED<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
28<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Color Code<br />
LED 20W White<br />
(5 300K typ.)<br />
20W3<br />
Warm white<br />
(3 300K typ.)<br />
20H3<br />
Blue<br />
(470nm)<br />
20B2<br />
LUXEON K2 LED used<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Very high optical purity<br />
and load strength<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Code<br />
A<br />
G<br />
OPTICAL SYSTEM<br />
Description Beam Code<br />
Adjustable Narrow 14˚ N<br />
Adjustable Medium 44˚ M<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 7.1in (180mm) 28<br />
For other body depths consult factory<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Side N<br />
Bottom<br />
Q<br />
Borosilicate<br />
Glass<br />
Ideal for general use<br />
areas<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished B<br />
steel<br />
Brushed H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed V<br />
Brass Polished T<br />
CABLE ENTRY<br />
Description<br />
X<br />
Code<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
12V 60Hz Wire wound transformer or<br />
13<br />
12-24V DC Ripple free regulated supply<br />
For appropriate transformer sizing refer to page 104<br />
LS853LED Accessories<br />
Stacking and order of accessories<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
81<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft hook-up wire<br />
82<br />
LS6013<br />
Slatted louver<br />
OR<br />
LS688<br />
Wall wash lens<br />
OR<br />
LS6012<br />
Cross hatch louver<br />
OR<br />
LS685<br />
Linear spreader lens<br />
LS691<br />
Prismatic lens<br />
LED<br />
standard<br />
Other accessory stacking options may be available - consult factory
TM<br />
LS853LED Pre-Installation Blockout (LED)<br />
Ingrade<br />
23<br />
For MH / HIT version of this product refer to page 21<br />
Product<br />
Code<br />
LS853LED<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
29<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Q<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Color Code<br />
LED 20W White<br />
(5 300K typ.)<br />
20W3<br />
Warm white<br />
(3 300K typ.)<br />
20H3<br />
Blue<br />
(470nm)<br />
20B2<br />
LUXEON K2 LED used<br />
LENS<br />
Description<br />
Code<br />
OPTICAL SYSTEM<br />
Description Beam Code<br />
Adjustable Narrow 14˚ N<br />
Adjustable Medium 44˚ M<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit<br />
(LS6052-K or LS6012-K)*<br />
11.0in<br />
(280mm)<br />
For other body depths consult factory<br />
* Must order LS6052-K or LS6012-K separately<br />
29<br />
OptiClear<br />
GripGlass<br />
Very high optical purity<br />
and load strength<br />
Suitable for drive-over<br />
OptiClear with<br />
slip reduction glazing<br />
process<br />
Suitable for drive-over<br />
A<br />
G<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Bottom Q<br />
Borosilicate<br />
Glass<br />
Ideal for general use<br />
areas<br />
Not suitable for drive-over<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS6052-K or LS6012-K required - order separately<br />
X<br />
Code<br />
85<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz Order with LS6052-K 4<br />
12V 60Hz Wire wound transformer or<br />
12-24V DC Ripple free regulated supply<br />
13<br />
Order with LS6012-K<br />
For appropriate transformer sizing refer to page 104<br />
LS853LED Accessories<br />
LS6013<br />
Slatted louver<br />
Stacking and order of accessories<br />
OR<br />
LS688<br />
Wall wash lens<br />
OR<br />
LS6012<br />
Cross hatch louver<br />
OR<br />
LS685<br />
Linear spreader lens<br />
LS691<br />
Prismatic lens<br />
LED<br />
standard<br />
Other accessory stacking options may be available - consult factory
LS843<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
25<br />
IP68<br />
IK10<br />
The LS843 is a 20W metal halide luminaire used for general uplighting applications.<br />
Available with wall wash lens, this luminaire is ideal for low level wall washing.<br />
Measuring only 7.1in (180mm) deep in direct burial format, the LS843 is suitable for<br />
reduced depth applications where other integral gear luminaires cannot be used.<br />
Specifications<br />
Lamp source 20W MH / HIT T4 (PGJ5)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation types Direct burial, landscapes, etc. Refer to pages 26-27<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit. Refer to pages 28-29<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
With OptiClear lens and pre-installation<br />
blockout (LS6052-K)<br />
9 260 lb (4 200kg) with OptiClear lens and<br />
pre-installation blockout (LS6052-K)<br />
IK10 with OptiClear lens<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Electronic control gear<br />
Humidity absorbing desiccant<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural, 1 year electrical<br />
Refer to page 27 for direct burial<br />
Refer to page 29 for pre-installation<br />
Refer to www.lumascape.com<br />
Glass temperature HumanTouchcompliant<br />
≤149°F (≤65°C)<br />
Refer to page 4 for more details<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS843 Round Flush Cover<br />
XJ / XK
(<br />
(<br />
(<br />
(<br />
26 LS843 Direct Burial<br />
Ingrade<br />
Why Use Direct Burial<br />
Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum<br />
heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilized<br />
landscapes.<br />
Cable Entry Options for Direct Burial<br />
Lens Options<br />
Armored Cable MC & Splice Box<br />
Armored cable 2ft (0.6m) provides protection<br />
against damage to cable between luminaire and 4<br />
way splice box (included). Allows for loop in / loop<br />
out and flexibility of luminaire placement.<br />
Single Conduit Entry 0.5in NPT<br />
For 0.5in conduit installation with<br />
MicroAntiLeach cable entry<br />
c/w 6.5ft (2.0m) hook-up wire.<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Direct Burial<br />
Use recessed cover for installation in soil,<br />
grass, pavers and other uneven surfaces<br />
where no cover overhang is desired.<br />
Use flush covers for installation in fine finished surfaces such as granite and<br />
marble. They can also be used in some suspended applications (decks, etc). The<br />
flush cover will conceal gaps between the luminaire and the surrounding surface.<br />
Recessed Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Round Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Square Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Ø 7.0in<br />
(178mm)<br />
Ø 7.0in<br />
(178mm)<br />
Ø 7.0in<br />
(178mm)<br />
Ø 9.5in (240mm)<br />
Ø 10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
10.1in (256mm)<br />
Ø 9.5in (240mm)<br />
7 .1in (18 0mm )<br />
0 .5in 14mm )<br />
0 .1in 3mm )<br />
7 .1in (18 0mm )<br />
7 .1in (18 0mm )<br />
0 .5in 14mm )<br />
(<br />
0 .1in 3mm )<br />
0 .5in 14mm )<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)<br />
Ø 7.0in (178mm)
TM<br />
LS843 Direct Burial<br />
Ingrade<br />
27<br />
Product<br />
Code<br />
LS843<br />
Lamp<br />
Code<br />
227<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
28<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4 20W PGJ5<br />
ECG*<br />
227<br />
* ECG - Electronic Control Gear<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity and<br />
load strength<br />
OptiClear with slip<br />
reduction glazing process<br />
Ideal for general use areas<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished<br />
B<br />
steel<br />
Brushed<br />
H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed<br />
I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed<br />
V<br />
Brass Polished T<br />
CABLE ENTRY<br />
Description<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
A<br />
G<br />
X<br />
Code<br />
81<br />
82<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Fixed Aluminum Medium XJ<br />
Wall wash XK<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 7.1in (180mm) 28<br />
For other body depths consult factory<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Side N<br />
Bottom<br />
Q<br />
Remote Side P<br />
Bottom<br />
R<br />
Remote electronic control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz 9<br />
LS843 Accessories<br />
Stacking and order of accessories<br />
LS636<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
OR<br />
OR<br />
LS6013<br />
Slatted louver<br />
LS6012<br />
Cross hatch louver<br />
LS699<br />
Wall wash lens<br />
OR<br />
LS691<br />
Prismatic lens<br />
LS686 - R / G / B / Y<br />
Dichroic c color filter<br />
LS685<br />
Linear spreader lens<br />
with<br />
XJ / XK<br />
Reflector<br />
standard<br />
Other accessory stacking options may be available - consult factory
28 LS843 Pre-Installation Blockout<br />
Ingrade<br />
Why Use Pre-Installation Blockout<br />
This type of installation requires the LS6052-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation before<br />
the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring to<br />
be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on the<br />
luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is<br />
completed. Pre-installation is required for all drive-over applications.<br />
Cable Entry Option for Pre-Installation Blockout<br />
Lens Options<br />
IP68 Connector & Splice Box<br />
The luminaire is fitted with an IP68<br />
connector, which attaches directly to the<br />
cable supplied with LS6052-K, without the<br />
use of any tools. The cable is 1.8ft (0.56m)<br />
in length, and is factory assembled with a 4<br />
way splice box.<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Pre-Installation Blockout<br />
Flush covers for pre-installation use special<br />
seals and support bushes to ensure static loads<br />
up to 9 260 lb (4 200kg) are properly supported.<br />
In order to achieve this drive-over rating,<br />
OptiClear or GripGlass must be used.<br />
Pre-Installation Blockout Round Flush Cover<br />
• SS316: Polished • Brass: Polished<br />
• SS316: Brushed • Brass: Brushed<br />
Ø 7.0in<br />
(178mm)<br />
Ø 10.3in (262mm)<br />
11.0in<br />
(28 0mm )<br />
Ø 7.5in (191mm)
TM<br />
LS843 Pre-Installation Blockout<br />
Ingrade<br />
29<br />
Product<br />
Code<br />
LS843<br />
Lamp<br />
Code<br />
227<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
29<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4 20W PGJ5<br />
ECG*<br />
227<br />
* ECG - Electronic Control Gear<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity and<br />
load strength<br />
Suitable for drive-over<br />
OptiClear with slip<br />
reduction glazing process<br />
Suitable for drive-over<br />
Ideal for general use areas<br />
Not suitable for drive-over<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
A<br />
G<br />
X<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Fixed Aluminum Medium XJ<br />
Wall wash XK<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit 11.0in (280mm)<br />
(LS6052-K)*<br />
29<br />
For other body depths consult factory<br />
* Must order LS6052-K separately<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Bottom Q<br />
Remote Bottom R<br />
Remote electronic control gear not included - consult factory<br />
Round Flush<br />
Cover<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz 9<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS6052-K required - order separately<br />
Code<br />
85<br />
LS843 Accessories<br />
Stacking and order of accessories<br />
OR<br />
OR<br />
LS6013<br />
Slatted louver<br />
LS6012<br />
Cross hatch louver<br />
LS699<br />
Wall wash lens<br />
OR<br />
LS691<br />
Prismatic lens<br />
LS686 - R / G / B / Y<br />
Dichroic color filter<br />
LS685<br />
Linear spreader lens<br />
with<br />
XJ / XK<br />
Reflector<br />
standard<br />
Other accessory stacking options may be available - consult factory
LS363<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
31<br />
IP68<br />
IK9<br />
The LS363 is an ingrade option now featuring 20W metal halide technology.<br />
HumanTouch is an important feature of this series, allowing placement in<br />
accessible areas. Adjustability of the reflector ensures light is delivered where it<br />
is required. The introduction of metal halide to this series now offers an attractive<br />
alternative to halogen in the same package size.<br />
Specifications<br />
Lamp source 20W MH / HIT T4 (PGJ5)<br />
50W max MR16 (GU5.3)<br />
18W CFL / TC-T (GX24q-2)<br />
26W CFL / TC-T (GX24q-3)<br />
75W max PAR 30 / 38 (E26 medium)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation types Direct burial, landscapes, etc. Refer to pages 32-33<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit. Refer to pages 34-35<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
With OptiClear lens and pre-installation<br />
blockout (LS644-K)<br />
3 956 lb (1 800kg) with OptiClear lens and<br />
pre-installation blockout (LS644-K)<br />
IK9 with OptiClear lens<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing desiccant<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural, 1 year electrical<br />
Refer to pages 36 -37<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W MH / HIT T4<br />
50W max MR16<br />
18W CFL / TC-T<br />
Refer to page 4 for more details<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS363 20W MH Round Flush Cover
32 LS363 Direct Burial<br />
Ingrade<br />
Why Use Direct Burial<br />
Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum<br />
heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilized<br />
landscapes.<br />
Cable Entry Options for Direct Burial<br />
Lens Options<br />
Armored Cable MC & Splice Box<br />
Armored cable 2ft (0.6m) provides protection<br />
against damage to cable between luminaire and 4<br />
way splice box (included). Allows for loop in / loop<br />
out and flexibility of luminaire placement.<br />
Single Conduit Entry 0.5in NPT<br />
For 0.5in conduit installation with<br />
MicroAntiLeach cable entry<br />
c/w 6.5ft (2.0m) hook-up wire.<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Direct Burial<br />
Use recessed cover for installation in soil,<br />
grass, pavers and other uneven surfaces<br />
where no cover overhang is desired.<br />
Use flush covers for installation in fine finished surfaces such as granite and<br />
marble. They can also be used in some suspended applications (decks, etc). The<br />
flush cover will conceal gaps between the luminaire and the surrounding surface.<br />
Recessed Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Round Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Square Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Ø 5.5in<br />
(140mm)<br />
Ø 5.5in<br />
(140mm)<br />
Ø 5.5in<br />
(140mm)<br />
Ø 7.4in (187mm)<br />
Ø 8.0in (204mm)<br />
Ø 7.4in (187mm)<br />
0.1in (3mm)<br />
8.0in (204mm)<br />
Ø 7.4in (187mm)<br />
8.7in ( 220mm )<br />
0.5in (14mm)<br />
0.1in ( 3mm )<br />
8.7in (220mm)<br />
0.5in (14mm)<br />
8.7in (220mm)<br />
0.5in (14mm)<br />
Ø 5.6in (142mm)<br />
Ø 5.6in (142mm)<br />
Ø 5.6in (142mm)
LS363 Direct Burial<br />
Ingrade<br />
33<br />
Product<br />
Code<br />
LS363<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
21<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4 20W PGJ5<br />
ECG*<br />
227<br />
PAR 30 / 38 75W max E26 med.<br />
120V only<br />
252<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG*<br />
26W GX24q-3 262<br />
HAL MR16 50W max GU5.3 292<br />
* ECG - Electronic Control Gear<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable Aluminum Narrow 12˚ XV 1<br />
Medium 30˚ XW 1<br />
Flood 54˚ XX 1<br />
Wide flood 74˚ XY 1<br />
Adjustable PAR 30 / 38 XS 4<br />
Fixed Aluminum Flood 140˚ XL 3<br />
Adjustable MR16 XK 2<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity and<br />
load strength<br />
OptiClear with slip<br />
reduction glazing process<br />
Ideal for general use areas<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished<br />
B<br />
steel<br />
Brushed<br />
H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed<br />
I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed<br />
V<br />
Brass Polished T<br />
CABLE ENTRY<br />
Description<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
A<br />
G<br />
X<br />
Code<br />
81<br />
82<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 8.7in (220mm) 21<br />
For other body depths consult factory<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Side N<br />
Bottom<br />
Q<br />
Remote Side P<br />
Bottom<br />
R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for PAR 30 / 38 9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 36-37.
(<br />
34 LS363 Pre-Installation Blockout<br />
Ingrade<br />
Why Use Pre-Installation Blockout<br />
This type of installation requires the LS644-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation before<br />
the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring to<br />
be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on the<br />
luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is<br />
completed. Pre-installation is required for all drive-over applications.<br />
Cable Entry Option for Pre-Installation Blockout<br />
Lens Options<br />
IP68 Connector & Splice Box<br />
The luminaire is fitted with an IP68<br />
connector, which attaches directly to the<br />
cable supplied with LS644-K, without the<br />
use of any tools. The cable is 1.8ft (0.56m)<br />
in length, and is factory assembled with a 4<br />
way splice box.<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Pre-Installation Blockout<br />
Flush covers for pre-installation use special<br />
seals and support bushes to ensure static loads<br />
up to 3 956 lb (1 800kg) are properly supported.<br />
In order to achieve this drive-over rating,<br />
OptiClear or GripGlass must be used.<br />
Pre-Installation Blockout Round Flush Cover<br />
• SS316: Polished • Brass: Polished<br />
• SS316: Brushed • Brass: Brushed<br />
Ø 5.5in<br />
(140mm)<br />
Ø 8.3in (210mm)<br />
12.6in<br />
325mm )<br />
Ø 6.1in (155mm)
LS363 Pre-Installation Blockout<br />
Ingrade<br />
35<br />
Product<br />
Code<br />
LS363<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
23<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4 20W PGJ5<br />
ECG*<br />
227<br />
PAR 30 / 38 75W max E26 med.<br />
120V only<br />
252<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG*<br />
26W GX24q-3 262<br />
HAL MR16 50W max GU5.3 292<br />
* ECG - Electronic Control Gear<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable Aluminum Narrow 12˚ XV 1<br />
Medium 30˚ XW 1<br />
Flood 54˚ XX 1<br />
Wide flood 74˚ XY 1<br />
Adjustable PAR 30 / 38 XS 4<br />
Fixed Aluminum Flood 140˚ XL 3<br />
Adjustable MR16 XK 2<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity and<br />
load strength<br />
Suitable for drive-over<br />
OptiClear with slip<br />
reduction glazing process<br />
Suitable for drive-over<br />
Ideal for general use areas<br />
Not suitable for drive-over<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Code<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS644-K required - order separately<br />
A<br />
G<br />
X<br />
Code<br />
85<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit 12.6in (325mm)<br />
(LS644-K)*<br />
23<br />
For other body depths consult factory<br />
* Must order LS644-K separately<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Bottom Q<br />
Remote Bottom R<br />
Remote control gear not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for PAR 30 / 38 9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 36-37.
TM<br />
TM<br />
TM<br />
36 LS363 Accessories<br />
Ingrade<br />
1<br />
MH CDM-TM<br />
Adjustable Aluminum Reflector<br />
XV / XW / XX / XY<br />
2<br />
MR16<br />
Adjustable MR16 Gimbal<br />
XK<br />
Stacking and order of accessories<br />
Stacking and order of accessories<br />
LS645<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
LS645<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
HumanTouch<br />
Only one HumanTouch accessory is required<br />
LS6067<br />
Concentric louver<br />
LS664<br />
Borosilicate lens only<br />
LS6064 - R / G / B / Y<br />
Dichroic color filter<br />
OR<br />
LS6065<br />
Linear spreader lens<br />
OR<br />
LS6066<br />
Prismatic lens<br />
LS6016<br />
OptiClear & GripGlass<br />
lens only<br />
OR<br />
LS646<br />
Cross hatch louver<br />
OR<br />
LS667<br />
Frosted filter<br />
with<br />
XV / XW / XX / XY<br />
Reflector<br />
LLLS<br />
Linear spreader lens<br />
OR<br />
LS643 - R / G / B / Y<br />
Dichroic color filter<br />
standard<br />
XK<br />
Other accessory stacking options may be available - consult factory<br />
Other accessory stacking options may be available - consult factory<br />
Cross section of gimbal assembly within luminaire body<br />
Cross section of gimbal assembly within luminaire body<br />
360 o<br />
360 o<br />
15 o<br />
20 o<br />
20 o<br />
30mm<br />
XV / XW / XX /XY<br />
Adjustable<br />
Aluminum<br />
Reflector<br />
XK<br />
Adjustable<br />
MR16<br />
Gimbal
TM<br />
TM<br />
LS363 Accessories<br />
Ingrade<br />
37<br />
3<br />
CFL / TC-T<br />
Fixed Aluminum Reflector<br />
XL<br />
Stacking and order of accessories<br />
4<br />
PAR30 - PAR38<br />
Fixed PAR Lamp<br />
XS<br />
Stacking and order of accessories<br />
LS645<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
LS645<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
LS664<br />
Borosilicate lens only<br />
HumanTouch<br />
Only one HumanTouch accessory is required<br />
LS646<br />
Cross hatch louver<br />
OR<br />
LS667<br />
Frosted filter<br />
OR<br />
LS694 - R / G / B / Y<br />
Dichroic color filter<br />
OR OR OR<br />
LS646<br />
Cross hatch louver<br />
LS667<br />
Frosted filter<br />
LS694 - R / G / B / Y<br />
Dichroic color filter<br />
LS677<br />
CFL glare shield<br />
XS<br />
LS6016<br />
OptiClear & GripGlass<br />
lens only<br />
with<br />
XL<br />
Reflector<br />
Other accessory stacking options may be available - consult factory<br />
Other accessory stacking options may be available - consult factory<br />
Cross section of gimbal assembly within luminaire body<br />
Cross sections of gimbal assemblies within luminaire body<br />
XL<br />
Fixed<br />
Aluminum<br />
Reflector<br />
XS<br />
Fixed<br />
PAR30<br />
Lamp<br />
XS<br />
Fixed<br />
PAR38<br />
Lamp
LS393 / LS393LED<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
39<br />
IP68<br />
IK9<br />
The LS393 is a compact ingrade option, utilizing 12V MR16 lamps up to 35W or 8W<br />
LED. HumanTouch is an important feature of this series, allowing placement in<br />
accessible areas. Adjustability of the lamp ensures light can be delivered where it<br />
is required. This model is also available with an 8W LED array and integrated power<br />
supply, making it ideal for applications where line voltage supply is required.<br />
Specifications<br />
Lamp source<br />
LS393<br />
Lamp source<br />
LS393LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation types<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
35W max MR16 IRC (GU5.3)<br />
Refer to pages 42-43<br />
8W LED (LUXEON K2) Refer to pages 44-45<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
For RGB consult factory Pre-install only<br />
Suitable for wet locations<br />
IP68<br />
316 marine grade stainless steel<br />
Direct burial, landscapes, etc.<br />
Refer to page 42 for MR16 version<br />
Refer to page 44 for LED version<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit.<br />
Refer to page 43 for MR16 version<br />
Refer to page 45 for LED version<br />
With OptiClear lens and pre-installation<br />
blockout (LS647-K / LS637-K)<br />
8 300 lb (3 750kg) with OptiClear lens and<br />
pre-installation blockout (LS647-K / LS637-K)<br />
IK9 with OptiClear lens<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Internal glare control louver<br />
MR16<br />
LED<br />
32°F to 122°F (0°C to 40°C)<br />
-4°F to 122°F (-20°C to +50°C)<br />
10 year structural, 1 year electrical<br />
Refer to page 42 for direct burial MR16<br />
Refer to page 43 for pre-installation MR16<br />
Refer to page 44 for direct burial LED<br />
Refer to www.lumascape.com<br />
Glass temperature HumanTouchcompliant<br />
≤149°F (≤65°C)<br />
Refer to page 4 for more details<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS393 Round Flush Cover<br />
360 o<br />
20 o<br />
XK<br />
20 o<br />
30mm<br />
LS393LED Round Flush Cover<br />
360 o<br />
15 o LED<br />
5 o
(<br />
(<br />
40 LS393 / LS393LED Direct Burial<br />
For MR16 version of this product refer to page 42, for LED version refer to page 44<br />
Why Use Direct Burial<br />
Ingrade<br />
Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum<br />
heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilized<br />
landscapes.<br />
Cable Entry Options for Direct Burial<br />
Lens Options<br />
Armored Cable MC & Splice Box<br />
Armored cable 2ft (0.6m) provides protection<br />
against damage to cable between luminaire and 4<br />
way splice box (included). Allows for loop in / loop<br />
out and flexibility of luminaire placement.<br />
Not available for RGB option<br />
Single Conduit Entry 0.5in NPT<br />
For 0.5in conduit installation with<br />
MicroAntiLeach cable entry<br />
c/w 6.5ft (2.0m) hook-up wire.<br />
Not available for RGB option<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Direct Burial<br />
Use recessed cover for installation in soil,<br />
grass, pavers and other uneven surfaces<br />
where no cover overhang is desired.<br />
Use flush covers for installation in fine finished surfaces such as granite and<br />
marble. They can also be used in some suspended applications (decks, etc). The<br />
flush cover will conceal gaps between the luminaire and the surrounding surface.<br />
Recessed Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Round Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Square Flush Cover<br />
• SS316: Polished<br />
• SS316: Brushed<br />
• Brass: Polished<br />
Ø 4.3in<br />
110mm<br />
Ø 4.3in<br />
( 110mm)<br />
4.3in<br />
(110mm)<br />
4 .8in 123mm )<br />
Ø 6.0in (153mm)<br />
0 .3in 10mm )<br />
(123mm)<br />
4.8in<br />
Ø 6.8in (172mm)<br />
Ø 6.0in (153mm)<br />
0 .3in (10mm) ( 0.1in ( 3mm )<br />
(123mm)<br />
4.8in<br />
6.8in (172mm)<br />
Ø 6.0in (153mm)<br />
0 .3in (10mm) (0.1in (3mm )<br />
Ø 4.3in (110mm)<br />
Ø 4.3in (110mm)<br />
Ø 4.3in (110mm)
LS393 / LS393LED Pre-Installation Blockout<br />
Ingrade<br />
41<br />
For MR16 version of this product refer to page 43, for LED version refer to page 45<br />
Why Use Pre-Installation Blockout<br />
This type of installation requires the LS647-K or LS637-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation<br />
before the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring<br />
to be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on the<br />
luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is<br />
completed. Pre-installation is required for all drive-over applications.<br />
Cable Entry Option for Pre-Installation Blockout<br />
Lens Options<br />
IP68 Connector & Splice Box<br />
The luminaire is fitted with an IP68<br />
connector, which attaches directly to<br />
the cable supplied with LS647-K or<br />
LS637-K, without the use of any tools. The<br />
cable is 1.8ft (0.56m) in length, and is factory<br />
assembled with a 4 way splice box.<br />
For RGB option contact factory<br />
OptiClear Glass<br />
Glass of very high<br />
optical purity and load<br />
strength. Suitable for<br />
drive-over applications.<br />
GripGlass<br />
OptiClear glass with<br />
slip reduction glazing<br />
process. Suitable for<br />
drive-over applications.<br />
Borosilicate Glass<br />
Ideal for general use<br />
areas. Not suitable for<br />
drive-over application.<br />
Cover Options for Pre-Installation Blockout<br />
Flush covers for pre-installation use special<br />
seals and support bushes to ensure static loads<br />
up to 8 260 lb (3 750kg) are properly supported.<br />
In order to achieve this drive-over rating,<br />
OptiClear or GripGlass must be used.<br />
Pre-Installation Blockout Round Flush Cover<br />
• SS316: Polished • Brass: Polished<br />
• SS316: Brushed • Brass: Brushed<br />
Ø 4.3in<br />
( 110mm)
TM<br />
TM<br />
42 LS393 Direct Burial (MR16)<br />
Ingrade<br />
For LED version of this product refer to page 44<br />
Product<br />
Code<br />
LS393<br />
Lamp<br />
Code<br />
295<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
XK<br />
Body<br />
Depth<br />
Code<br />
21<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
8<br />
LAMP<br />
Description Wattage Base Code<br />
MR16 35W IRC GU5.3 295<br />
OPTICAL SYSTEM<br />
Description<br />
Adjustable<br />
Code<br />
XK<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
OptiClear with slip<br />
reduction glazing process<br />
Ideal for general use areas<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished B<br />
steel<br />
Brushed H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed I<br />
Brass Polished G<br />
Stainless<br />
steel<br />
A<br />
G<br />
X<br />
Polished<br />
Brushed<br />
U<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 4.8in (123mm) 21<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Remote Side P<br />
Bottom<br />
R<br />
Remote transformer not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
12V 8<br />
LS393 MR16 Accessories<br />
V<br />
Brass Polished T Stacking and order of accessories<br />
CABLE ENTRY<br />
Description<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
Code<br />
81<br />
82<br />
LS648<br />
Brass grill<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
OR<br />
LS6020<br />
LS665<br />
OptiClear & GripGlass<br />
lens only<br />
Borosilicate lens only<br />
LLLS<br />
Linear spreader lens<br />
LS643 - R / G / B / Y<br />
Dichroic color filter<br />
XK<br />
Other accessory stacking options may be available - consult factory
TM<br />
TM<br />
LS393 Pre-Installation Blockout (MR16)<br />
Ingrade<br />
43<br />
For LED version of this product refer to page 45<br />
Product<br />
Code<br />
LS393<br />
Lamp<br />
Code<br />
295<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
XK<br />
Body<br />
Depth<br />
Code<br />
23<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
R<br />
Supply<br />
Voltage<br />
Code<br />
8<br />
LAMP<br />
Description Wattage Base Code<br />
MR16 35W IRC GU5.3 295<br />
OPTICAL SYSTEM<br />
Description<br />
Adjustable<br />
Code<br />
XK<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
Suitable for drive-over<br />
OptiClear with slip<br />
reduction glazing process<br />
Suitable for drive-over<br />
Ideal for general use areas<br />
Not suitable for drive-over<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Code<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
A<br />
G<br />
X<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit 9.5in (240mm)<br />
(LS647-K)*<br />
23<br />
* Must order LS647-K separately<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Remote Bottom R<br />
Remote transformer not included - consult factory<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
12V 8<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS647-K required - order separately<br />
Code<br />
85<br />
LS393 MR16 Accessories<br />
Stacking and order of accessories<br />
OR<br />
LS6020<br />
LS665<br />
OptiClear & GripGlass<br />
lens only<br />
Borosilicate lens only<br />
LLLS<br />
Linear spreader lens<br />
LS643 - R / G / B / Y<br />
Dichroic color filter<br />
XK<br />
Other accessory stacking options may be available - consult factory
TM<br />
44<br />
LS393LED Direct Burial (LED)<br />
Ingrade<br />
For MR16 version of this product refer to page 42<br />
Product<br />
Code<br />
LS393LED<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
21<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Color Code<br />
LED 8W White<br />
(5 300K typ.)<br />
8W3<br />
Warm white<br />
(3 300K typ.)<br />
8H3<br />
Blue<br />
(470nm)<br />
8B2<br />
LUXEON K2 LED used<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Borosilicate<br />
Glass<br />
Very high optical purity<br />
and load strength<br />
OptiClear with slip<br />
reduction glazing process<br />
Ideal for general use areas<br />
CABLE ENTRY<br />
Description<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Recessed<br />
Cover<br />
Round Flush<br />
Cover<br />
Square Flush<br />
Cover<br />
Stainless Polished B<br />
steel<br />
Brushed H<br />
Brass Polished E<br />
Stainless Polished D<br />
steel<br />
Brushed I<br />
Brass Polished G<br />
Stainless Polished U<br />
steel<br />
Brushed V<br />
Brass Polished T<br />
A<br />
G<br />
X<br />
Code<br />
OPTICAL SYSTEM<br />
Description Beam Code<br />
Adjustable Narrow 8˚ N<br />
Medium 28˚ M<br />
Flood 46˚ F<br />
BODY DEPTH<br />
Description Depth Code<br />
Direct burial 4.8in (123mm) 21<br />
CONTROL GEAR &<br />
CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Side N<br />
Bottom<br />
Q<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
12V 60Hz Wire wound transformer or<br />
13<br />
12-24V DC Ripple free regulated supply<br />
For appropriate transformer sizing refer to page 104<br />
LS393LED Accessories<br />
LS636<br />
Brass grill<br />
Stacking and order of accessories<br />
External accessory<br />
Use with recessed covers only<br />
Not suitable for use in traffic areas<br />
Armored Cable MC & Splice Box<br />
c/w 2ft (0.6m) armored cable<br />
81<br />
Single Conduit Entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
82<br />
LED<br />
standard
TM<br />
LS393LED Pre-Installation Blockout (LED)<br />
Ingrade<br />
45<br />
For MR16 version of this product refer to page 43<br />
Product<br />
Code<br />
LS393LED<br />
Lamp<br />
Code<br />
Lens<br />
Code<br />
Cover<br />
Code<br />
Cable<br />
Entry<br />
Code<br />
85<br />
Optical<br />
System<br />
Code<br />
Body<br />
Depth<br />
Code<br />
23<br />
Control<br />
Gear<br />
& Cable<br />
Entry<br />
Code<br />
Q<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Color Code<br />
LED 8W White<br />
(5 300K typ.)<br />
8W3<br />
Warm white<br />
(3 300K typ.)<br />
8H3<br />
Blue<br />
(470nm)<br />
8B2<br />
LUXEON K2 LED used<br />
LENS<br />
Description<br />
OptiClear<br />
GripGlass<br />
Very high optical purity<br />
and load strength<br />
Suitable for drive-over<br />
OptiClear with slip<br />
reduction glazing process<br />
Suitable for drive-over<br />
Code<br />
A<br />
G<br />
OPTICAL SYSTEM<br />
Description Beam Code<br />
Adjustable Narrow 8˚ N<br />
Medium 28˚ M<br />
Flood 46˚ F<br />
BODY DEPTH<br />
Description Depth Code<br />
Suits pre-install kit<br />
(LS647-K or LS637-K)*<br />
9.5in<br />
(240mm)<br />
* Must order LS647-K or LS637-K separately<br />
CONTROL GEAR & CABLE ENTRY LOCATION<br />
Description Cable Entry Code<br />
Integral Bottom Q<br />
23<br />
Borosilicate<br />
Glass<br />
Ideal for general use areas<br />
Not suitable for drive-over<br />
X<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
COVER<br />
Description Material Finish Code<br />
Round Flush<br />
Cover<br />
Stainless Polished M<br />
steel Brushed N<br />
Brass Polished L<br />
Brushed K<br />
CABLE ENTRY<br />
Description<br />
IP68 Connector & Splice Box<br />
c/w 1.8ft (0.56m) of factory assembled cable<br />
LS647-K or LS637-K required - order separately<br />
Code<br />
85<br />
120V 60Hz Order with LS637-K 4<br />
12V 60Hz Wire wound transformer or<br />
12-24V DC Ripple free regulated supply<br />
13<br />
Order with LS647-K<br />
For appropriate transformer sizing refer to page 104<br />
LS393LED Accessories<br />
Stacking and order of accessories<br />
No accessories required for this product<br />
LED<br />
standard
LS333<br />
Refer to Symbol Index on page 2 for explanation<br />
Ingrade<br />
47<br />
IP68<br />
IK7<br />
The LS333 is a family of compact ingrade and wall recessed luminaires, designed<br />
and built with high performance in mind. All are available with a selection of cover<br />
plates to suit various installation types. An optional integral transformer and optional<br />
niche are available.<br />
Specifications<br />
Lamp source 20W max MR16 (GU5.3)<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation types<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Suitable for wet locations<br />
IP68<br />
316 marine grade stainless steel<br />
LS333A Direct burial, wallmount, ingrade<br />
Remote transformer required - order separately<br />
LS333AN Niche / concrete blockout<br />
(wallmount, ingrade)<br />
Remote transformer required - order separately<br />
LS333ANI Niche / concrete blockout<br />
(wallmount, ingrade)<br />
Supplied with integral transformer<br />
4 070 lb (1 850kg)<br />
IK7<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Internal glare control louver<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural, 1 year electrical<br />
LS629 Round wall cover<br />
LS628 Square wall cover<br />
LLLS Linear spreader lens<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
LS333 Round Flush Cover<br />
Any luminaire can become hot - take care with appropriate use and placement
48 LS333<br />
Ingrade<br />
Ø 4.3in (110mm)<br />
Ø 5.9in (150mm)<br />
Ø 5.9in (150mm)<br />
Ø 5.1in (130mm)<br />
Ø 5.1in (130mm)<br />
Ø 2.6in<br />
( 67mm)<br />
Ø 2.6in<br />
( 67mm)<br />
(3.0mm)<br />
Ø 2.6in<br />
( 67mm)<br />
(3.0mm)<br />
Ø 2.6in<br />
(67mm)<br />
Ø 2.6in<br />
(67mm)<br />
0.1in<br />
0.1in<br />
0.06in ( 1.6mm)<br />
0.06in ( 1.6mm)<br />
Recessed Cover<br />
• SS316: Polished<br />
• Copper: Polished-CFP<br />
Round Flush Cover<br />
• SS316: Polished-BS<br />
• SS316: Brushed-BSB<br />
• Brass: Polished-BB<br />
• Copper: Polished-BC<br />
Square Flush Cover<br />
• SS316: Polished-SS<br />
• SS316: Brushed-SSB<br />
• Brass: Polished-SB<br />
• Copper: Polished-SC<br />
Round Wall Cover<br />
LS629-S<br />
• SS316: Polished<br />
LS629-SB<br />
• SS316: Brushed<br />
LS629-B<br />
• Brass: Polished<br />
LS629-C<br />
• Copper: Polished<br />
Square Wall Cover<br />
LS628-S<br />
• SS316: Polished<br />
LS628-SB<br />
• SS316: Brushed<br />
LS628-B<br />
• Brass: Polished<br />
LS628-C<br />
• Copper: Polished<br />
3.1in ( 80mm )<br />
Ø 4.3in (110mm)<br />
LS333A - Ingrade or Wall Mount (Remote Transformer)<br />
0.5in NPT adaptor MicroAntiLeach<br />
c/w 6.5ft (2m) hook-up wire<br />
(120mm)<br />
4.7in<br />
1.0in ( 25mm )<br />
Ø 4.5in (115mm)<br />
LS333AN Niche / Pre-Installation Blockout (Remote Transformer)<br />
LS333ANI Niche / Pre-Installation Blockout (Integral Transformer)<br />
0.5in NPT adaptor MicroAntiLeach<br />
c/w 6.5ft (2m) hook-up wire<br />
(120mm)<br />
4.7in<br />
Ø 4.5in (115mm)<br />
LS333AN Niche / Pre-Installation Blockout (Remote Transformer)<br />
LS333ANI Niche / Pre-Installation Blockout (Integral Transformer)<br />
2ft (0.6m) Armored Cable MC & Splice Box
LS333<br />
Ingrade<br />
49<br />
LS333A (No Niche, 12V)<br />
LS333A<br />
1<br />
PRODUCT LAMP WATTAGE VOLTAGE BASE Code<br />
DESCRIPTION MATERIAL FINISH Code<br />
CABLE ENTRY<br />
Code<br />
Ingrade<br />
Direct burial<br />
MR16 20W 12V GU5.3<br />
LS333A<br />
Recessed Cover Stainless steel Polished --<br />
Copper Polished CFP<br />
Round Flush Cover Stainless steel Polished BS<br />
Brushed BSB<br />
Brass Polished BB<br />
Copper Polished BC<br />
Square Flush Cover Stainless steel Polished SS<br />
Brushed SSB<br />
Brass Polished SB<br />
Copper Polished SC<br />
0.5in NPT adaptor<br />
MicroAntiLeach c/w<br />
6.5ft (2m) hook-up wire<br />
1<br />
LS333AN (Complete with Niche / Pre-Installation Blockout, Remote Transformer, 12V)<br />
LS333AN<br />
PRODUCT LAMP WATTAGE VOLTAGE BASE Code<br />
DESCRIPTION MATERIAL FINISH Code<br />
CABLE ENTRY<br />
Code<br />
Ingrade<br />
Pre-installation<br />
blockout<br />
MR16 20W 12V GU5.3<br />
LS333AN<br />
Recessed Cover Stainless steel Polished --<br />
Copper Polished CFP<br />
Round Flush Cover Stainless steel Polished BS<br />
Brushed BSB<br />
Brass Polished BB<br />
Copper Polished BC<br />
Square Flush Cover Stainless steel Polished SS<br />
Brushed SSB<br />
Brass Polished SB<br />
Copper Polished SC<br />
0.5in NPT adaptor<br />
MicroAntiLeach c/w<br />
6.5ft (2m) hook-up wire<br />
2ft (0.6m) Armored Cable<br />
MC & Splice Box<br />
1<br />
2<br />
LS333ANI (Complete with Niche / Pre-Installation Blockout, Integral Transformer, 120V 60Hz)<br />
LS333ANI<br />
PRODUCT LAMP WATTAGE VOLTAGE BASE Code<br />
DESCRIPTION MATERIAL FINISH Code<br />
CABLE ENTRY<br />
Code<br />
Ingrade<br />
Niche / pre-installation<br />
blockout, integral<br />
transformer<br />
MR16 20W 120V 60Hz GU5.3<br />
LS333ANI<br />
Recessed Cover Stainless steel Polished --<br />
Copper Polished CFP<br />
Round Flush Cover Stainless steel Polished BS<br />
Brushed BSB<br />
Brass Polished BB<br />
Copper Polished BC<br />
Square Flush Cover Stainless steel Polished SS<br />
Brushed SSB<br />
Brass Polished SB<br />
Copper Polished SC<br />
0.5in NPT adaptor<br />
MicroAntiLeach c/w<br />
6.5ft (2m) hook-up wire<br />
2ft (0.6m) Armored Cable<br />
MC & Splice Box<br />
1<br />
2
50 LS563LED Vedi<br />
Ingrade<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
IK7<br />
The LS563LED is a marker light featuring a luminous surface with uniform brightness.<br />
A 3W version is also available, suitable for uplighting applications requiring a beam<br />
of light. Constructed from 316 marine grade stainless steel, the luminaire features an<br />
ElectroPolishPlus finish for enhanced appearance and corrosion protection.<br />
Specifications<br />
Lamp source 1W or 3W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
For RGB consult factory<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation types Direct burial, landscapes, etc. Refer to page 51<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit. Refer to page 51<br />
Drive-over<br />
Static load rating<br />
Impact rating<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
With pre-installation blockout (LS698-K) only<br />
2 425 lb (1 100kg) with pre-installation blockout<br />
(LS698-K)<br />
IK7<br />
MicroAntiLeach cable entry<br />
-4°F to 122°F (-20°C to +50°C)<br />
10 year structural, 1 year electrical<br />
LS6095 Constant current driver<br />
LS698-K Pre-installation blockout<br />
For RGB driver options consult factory<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
LS563LED Vedi<br />
1W version with diffused lens<br />
LS563LED Vedi<br />
3W version with clear lens<br />
(78mm)<br />
3.1in<br />
0 .2in (4 mm )<br />
3.5in (90mm)<br />
Ø 2.6in ( 67mm)<br />
3.1in ( 78mm )<br />
0.5in ( 13mm )<br />
Ø 3.5in (90mm)<br />
11.0in (280mm)<br />
Ø 3.7in (94mm)<br />
11.0in (280mm)<br />
Ø 3.7in (94mm)<br />
11.0in (280mm)<br />
Ø 3.7in (94mm)<br />
LS563LED-xxx-xx-21-xx<br />
0.5in NPT for 0.5in conduit installation<br />
(MicroAntiLeach) c/w hook-up<br />
wire 6.5ft (2.0m)<br />
LS563LED-xxx-xx-23-1-xx<br />
Complete with LS698-K pre-installation<br />
single conduit entry (concrete and driveover)<br />
with 0.5in NPT adaptor c/w 6.5ft<br />
(2.0m) hook-up wire<br />
LS563LED-xxx-xx-23-2-xx<br />
Complete with LS698-K pre-installation<br />
MC cable 2ft (0.6m) & through wire<br />
splice box (concrete and drive-over)<br />
LS563LED-xxx-xx-23-3-xx<br />
Complete with LS698-K pre-installation<br />
single conduit entry ( concrete and driveover)<br />
with 0.5in NPT adaptor c/w 1.0ft<br />
(0.3m) hook-up wire - consult factory for<br />
multiple conduit entry options
LS563LED Vedi<br />
LS563LED 1W Direct Burial Version (Diffused Lens)<br />
Ingrade<br />
51<br />
LS563LED<br />
21<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
FINISH<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Vedi LED<br />
(1W)<br />
LS563LED<br />
LED 1W White<br />
(5 300K typ.)<br />
1W3<br />
Warm white<br />
1H3<br />
(3 300K typ.)<br />
Blue<br />
1B2<br />
(470nm)<br />
Note: 1W version supplied with diffused lens, beam angle selection not available<br />
For appropriate transformer sizing refer to page 104<br />
LUXEON K2 LED used<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
Single conduit entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire<br />
21<br />
120V 60Hz 4<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supply<br />
350mA constant<br />
current remote driver<br />
LS6095 required<br />
Order separately<br />
R<br />
LS563LED 1W Pre-Installation Blockout Version (Diffused Lens)<br />
LS563LED<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
FINISH<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Vedi LED<br />
(1W)<br />
LS563LED<br />
LED 1W White<br />
(5 300K typ.)<br />
1W3<br />
Warm white<br />
1H3<br />
(3 300K typ.)<br />
Blue<br />
1B2<br />
(470nm)<br />
Note: 1W version supplied with diffused lens, beam angle selection not available<br />
For appropriate transformer sizing refer to page 104<br />
LUXEON K2 LED used<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
Drive-over: Single conduit entry<br />
0.5in NPT c/w 6.5ft (2.0m) hookup<br />
wire<br />
Drive-over: LS698-K & direct<br />
burial type MC cable & through<br />
wire splice box 2ft (0.6m)<br />
Drive-over: LS698-K & single<br />
conduit entry 0.5in NPT 1ft (0.3m)<br />
23-1<br />
23-2<br />
23-3<br />
120V 60Hz 4<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supply<br />
350mA constant<br />
current remote driver<br />
LS6095 required<br />
Order separately<br />
R<br />
LS563LED 3W Direct Burial Version (Clear Lens)<br />
LS563LED<br />
21<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
FINISH<br />
Code<br />
BEAM<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Vedi LED<br />
(3W)<br />
LS563LED<br />
LED 3W White<br />
(5 300K typ.)<br />
Warm white<br />
(3 300K typ.)<br />
Blue<br />
(470nm)<br />
Note: 3W version supplied with clear lens, beam angle selection available<br />
For appropriate transformer sizing refer to page 104<br />
LUXEON K2 LED used<br />
3W3<br />
3H3<br />
3B2<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
Narrow 8˚<br />
Medium 28˚<br />
Flood 46˚<br />
N<br />
M<br />
F<br />
Single conduit entry 0.5in<br />
NPT c/w 6.5ft (2.0m) hookup<br />
wire<br />
21<br />
120V 60Hz 4<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supply<br />
350mA constant<br />
current remote driver<br />
LS6095 required<br />
Order separately<br />
R<br />
LS563LED 3W Pre-Installation Blockout Version (Clear Lens)<br />
LS563LED<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
FINISH<br />
Code<br />
BEAM<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Vedi LED<br />
(3W)<br />
LS563LED<br />
LED 3W White<br />
(5 300K typ.)<br />
3W3<br />
Warm white<br />
3H3<br />
(3 300K typ.)<br />
Blue<br />
3B2<br />
(470nm)<br />
Note: 3W version supplied with clear lens, beam angle selection available<br />
For appropriate transformer sizing refer to page 104<br />
LUXEON K2 LED used<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
Narrow 8˚<br />
Medium 28˚<br />
Flood 46˚<br />
N<br />
M<br />
F<br />
Drive-over: Single conduit<br />
entry 0.5in NPT c/w 6.5ft<br />
(2.0m) hook-up wire<br />
Drive-over: LS698-K & direct<br />
burial type MC cable &<br />
through wire splice box<br />
2ft (0.6m)<br />
Drive-over: LS698-K & single<br />
conduit entry 0.5in NPT<br />
1ft (0.3m)<br />
120V 60Hz 4<br />
23-1<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supply<br />
23-2<br />
350mA constant<br />
current remote driver<br />
R<br />
LS6095 required<br />
Order separately<br />
23-3
52 LS553LED Via<br />
Ingrade<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
IK10<br />
The LS553LED is a rugged, side emitting marker light constructed of 316 marine<br />
grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other<br />
public spaces. Some models are also suitable for use in low speed traffic areas. The<br />
construction and technology used in this luminaire ensures a long service life.<br />
Specifications<br />
Lamp source 1W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation types Direct burial, landscapes, etc. Refer to page 52<br />
Pre-installation blockout, drive-over or other<br />
installations requiring pre-installation mounting<br />
kit. Refer to page 53<br />
Drive-over With pre-installation blockout (LS698-K) and 8<br />
aperture stainless steel model only<br />
Static load rating<br />
Impact rating<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
One aperture - 2 200 lb (1 000kg)<br />
Two aperture - 2 200 lb (1 000kg)<br />
Four aperture - 3 300 lb (1 500kg)<br />
Eight aperture - 4 400 lb (2 000kg)<br />
Ratings are for stainless steel covers with pre-installation<br />
blockout LS698-K only<br />
IK10 for 8 aperture model<br />
MicroAntiLeach cable entry<br />
-4°F to 122°F (-20°C to +50°C)<br />
10 year structural, 1 year electrical<br />
LS6095 Constant current driver<br />
LS698-K Pre-installation blockout<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
3.1in ( 78mm )<br />
0.5in ( 13mm )<br />
LS553LED Via<br />
Ø 3.5in ( 90mm)<br />
Ø 2.6in ( 67mm)<br />
LS553LED Direct Burial Version<br />
LS553LED<br />
21<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR<br />
Code<br />
FINISH<br />
Code<br />
APERTURES<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Via LED<br />
LS553LED<br />
LED 1W White<br />
(5 300K typ.)<br />
Warm white<br />
(3 300K typ.)<br />
Blue<br />
(470nm)<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
1W3<br />
1H3<br />
1B2<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
One 1<br />
Two 2<br />
Four 4<br />
Eight 8<br />
Standard (compatible with<br />
single conduit entry 0.5in NPT<br />
c/w 6.5ft (2.0m) hook-up wire)<br />
21<br />
120V 60Hz 4<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supply<br />
350mA constant<br />
current remote driver<br />
LS6095 required<br />
Order separately<br />
R
(<br />
LS553LED Via<br />
Ingrade<br />
53<br />
Ø 3.5in ( 90mm)<br />
Ø 3.5in ( 90mm)<br />
0 .5in 13mm )<br />
0.5in<br />
(13mm)<br />
One aperture (1 x 120º)<br />
Four aperture (4 x 85º)<br />
Ø 3.5in ( 90mm)<br />
Ø 3.5in ( 90mm)<br />
0.5in<br />
0.5in<br />
(13mm)<br />
(13mm)<br />
Two aperture (2 x 120º)<br />
Eight aperture (8 x 40º)<br />
3.1in ( 78mm )<br />
0.5in ( 13mm )<br />
Ø 3.5in (90mm)<br />
11.0in (280mm)<br />
0.5in ( 13mm )<br />
Ø 3.7in (94mm)<br />
11.0in (280mm)<br />
0.5in ( 13mm )<br />
Ø 3.7in (94mm)<br />
11.0in (280mm)<br />
0.5in ( 13mm )<br />
Ø 3.7in (94mm)<br />
LS553LED-xxx-xx-x-21-xx<br />
0.5in NPT for 0.5in conduit installation<br />
(MicroAntiLeach) c/w hook-up wire<br />
6.5ft (2.0m)<br />
LS553LED-xxx-xx-x-23-1-xx<br />
Complete with LS698-K pre-installation<br />
single conduit entry (concrete and driveover)<br />
with 0.5in NPT adaptor c/w 6.5ft<br />
(2.0m) hook-up wire<br />
LS553LED-xxx-xx-x-23-2-xx<br />
Complete with LS698-K pre-installation MC<br />
cable 2ft (0.6m) & through wire splice box<br />
(concrete and drive-over)<br />
LS553LED-xxx-xx-x-23-3-xx<br />
Complete with LS698-K pre-installation<br />
single conduit entry ( concrete and driveover)<br />
with 0.5in NPT adaptor c/w 1.0ft<br />
(0.3m) hook-up wire - consult factory for<br />
multiple conduit entry options<br />
LS553LED Pre-Installation Blockout Version<br />
LS553LED<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR<br />
Code<br />
FINISH<br />
Code<br />
APERTURES<br />
Code<br />
CABLE ENTRY<br />
Code<br />
VOLTAGE<br />
Code<br />
Via LED<br />
LS553LED<br />
LED 1W White<br />
(5 300K typ.)<br />
Warm white<br />
(3 300K typ.)<br />
Blue<br />
(470nm)<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
1W3<br />
1H3<br />
1B2<br />
Stainless steel<br />
Brass<br />
Powdercoated:<br />
Black<br />
Powdercoated:<br />
White<br />
Powdercoated:<br />
Silver<br />
SS<br />
BR<br />
CB<br />
CW<br />
CS<br />
One 1<br />
Two 2<br />
Four 4<br />
Eight<br />
Drive-over, with<br />
stainless steel<br />
8<br />
cover only<br />
Drive-over: Single conduit<br />
entry 0.5in NPT c/w 6.5ft 23-1<br />
(2.0m) hook-up wire<br />
Drive-over: LS698-K & direct<br />
burial type MC cable & through 23-2<br />
wire splice box 2ft (0.6m)<br />
Drive-over: LS698-K & single<br />
conduit entry 0.5in NPT<br />
23-3<br />
1ft (0.3m)<br />
120V 60Hz 4<br />
12V 60Hz Wire wound<br />
transformer<br />
13<br />
12-24V DC Ripple free<br />
regulated supplyply<br />
350mA constant<br />
current remote driver<br />
R<br />
LS6095 required<br />
Order separately
54 LS793LED<br />
Ingrade<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
IK7<br />
The LS793LED is a compact ingrade luminaire featuring a small aperture. The compact<br />
size allows the luminaire to be integrated into more places without appearing to<br />
dominate the architecture or landscape. For better control of light, a factory set lamp<br />
tilt option is available delivering more light onto the desired surface.<br />
Specifications<br />
Lamp source 8W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
Installation type<br />
Static load rating<br />
Impact rating<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessory<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
316 marine grade stainless steel and<br />
diecast brass<br />
Direct burial (landscapes, etc.)<br />
1 650 lb (750kg)<br />
IK7<br />
MicroAntiLeach cable entry<br />
Internal glare control louver<br />
-4°F to 122°F (-20°C to +50°C)<br />
5 year structural, 1 year electrical<br />
LS6096 Constant current remote driver<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
4.5in (114mm)<br />
0.1in (3mm)<br />
L793LED<br />
Ø 4.2in (106mm)<br />
Ø 3.8in (97mm)<br />
0˚<br />
15˚<br />
Tilt Angles<br />
Factory set at 0° or 15°<br />
LS793LED<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code<br />
VOLTAGE<br />
Code<br />
TILT<br />
Code<br />
Ingrade LED LS793LED LED 8W White (5 300K typ.) 8W3 Narrow 8˚ N<br />
Warm white (3 300K typ.) 8H3 Medium 28˚ M<br />
Blue (470nm) 8B2 Flood 46˚ F<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
12V 60Hz Wire wound transformer<br />
12-24V DC Ripple free regulated supply<br />
700mA constant current remote<br />
driver LS6096. Order separately<br />
13<br />
R<br />
0˚<br />
15˚<br />
U<br />
W
55<br />
spotlight & floodlight
56 LS452 / LS452LED Centria<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP66<br />
IP67<br />
The LS452 semi recessed Centria is ideal for signage illumination, wall washing<br />
and general landscape lighting applications where a low profile appearance is<br />
desired. LS452 provides an alternative to traditional ingrade uplighting allowing<br />
efficient focusing of the light whilst minimizing spill. The IP68 stainless steel gear<br />
enclosure below grade ensures long life. Choices of lamps, beam angles, light and<br />
glare control accessories are available.<br />
Specifications<br />
Lamp source<br />
LS452<br />
Lamp source<br />
LS452LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
20W, 39W, 70W MH / HIT T4.5 (G8.5)<br />
34W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For RGB consult factory<br />
Suitable for wet locations<br />
IP66 / IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum and 316 marine grade stainless steel<br />
Semi recessed<br />
MicroAntiLeach cable entry<br />
Electronic control gear / driver<br />
20W, 39W -4°F to 122°F (-20°C to +50°C)<br />
70W -4°F to 104°F (-20°C to +40°C)<br />
LED -4°F to 122°F (-20°C to +50°C)<br />
2 year structural, 1 year electrical<br />
LS6065 Linear spreader lens except for 28° LED<br />
LS6066 Prismatic lens MH / HIT only<br />
LS6067 Concentric louver except for 10° LED<br />
LS6064 - R / G / B / Y Dichroic filters MH / HIT only<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W MH / HIT T4.5<br />
34W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS452 Centria<br />
9.3in (237mm)<br />
4.8in<br />
(123mm)<br />
1.8in (46mm)<br />
5˚<br />
365˚<br />
Ø 4.3in<br />
(110mm)<br />
LS452LED Centria<br />
105˚<br />
10˚<br />
Ø 8.3in (210mm)<br />
Ø 4.3in (110mm)<br />
MH / HIT Version<br />
LS452<br />
PRODUCT Code LAMP WATTAGE BASE Code REFLECTOR BEAM Code VOLTAGE Code FINISH Code<br />
Centria Semi Recessed LS452 MH / HIT T4.5 20W G8.5 211 Aluminum Narrow 12˚ XV 120V 60Hz 4 Black CB<br />
ECG*<br />
39W 212 Medium 30˚ XW 277V 60Hz 9 White CW<br />
70W 213 Flood 54˚ XX Silver CS<br />
* ECG - Electronic Control Gear Wide flood 74˚ XY<br />
LED Version<br />
LS452LED 4<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code VOLTAGE Code FINISH Code<br />
Centria Semi Recessed LED LS452LED LED 34W White (5 300K typ.) 34W3 Narrow 10˚ N 120V 60Hz 4 Black CB<br />
Warm white (3 300K typ.) 34H3 Medium 28˚ M White CW<br />
Blue (470nm) 34B2 Silver CS<br />
LUXEON K2 LED used
LS432 / LS432LED / LS422 / LS422LED Centria<br />
Refer to Symbol Index on page 2 for explanation<br />
Spotlight & Floodlight<br />
57<br />
IP66<br />
IP67<br />
The LS432 and LS422 series feature ground mounted luminaires to cater for a<br />
wide range of landscape lighting applications. Available for spike or concrete pad<br />
mounting, the height of the luminaire allows the light head to stand above plantings<br />
for an unobstructed cast of light on the target. Choices of lamps, beam angles, light<br />
and glare control accessories are available.<br />
Specifications<br />
Lamp source<br />
LS432 / LS422<br />
20W, 39W, 70W MH / HIT T4.5 (G8.5)<br />
Lamp source<br />
LS432LED / LS422LED<br />
34W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For RGB consult factory<br />
UL classification<br />
Suitable for wet locations<br />
IP rating<br />
Construction<br />
IP66 / IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
LS432LED Centria<br />
Surface Mount<br />
LS422 Centria<br />
Spike Mount<br />
Installation types<br />
Standard inclusion<br />
Surface mount LS432 only<br />
Spike mount LS422 only<br />
Electronic control gear / driver<br />
5˚<br />
365˚<br />
105˚<br />
5˚<br />
365˚<br />
Ø 4.3in<br />
(110mm)<br />
105˚<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
20W, 39W -4°F to 122°F (-20°C to +50°C)<br />
70W -4°F to 104°F (-20°C to +40°C)<br />
LED -4°F to 122°F (-20°C to +50°C)<br />
2 year structural, 1 year electrical<br />
LS6054 Groundmount spike<br />
LS6065 Linear spreader lens except for 28° LED<br />
LS6066 Prismatic lens MH / HIT only<br />
LS6067 Concentric louver except for 10° LED<br />
LS6064 - R / G / B / Y Dichroic filters MH / HIT only<br />
Refer to www.lumascape.com<br />
15.8in (402mm)<br />
8.3in (212mm)<br />
Ø 4.3in<br />
(110mm)<br />
LS432LED Centria<br />
Surface Mount<br />
10˚<br />
15.3in (389mm)<br />
19.7in (500mm)<br />
7.8in (199mm)<br />
10˚<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
HumanTouchcompliant models<br />
20W MH / HIT T4.5<br />
34W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS422 Centria<br />
Spike Mount<br />
MH / HIT Version<br />
PRODUCT Code LAMP WATTAGE BASE Code REFLECTOR BEAM Code VOLTAGE Code FINISH Code<br />
Centria Surface Mount LS432 MH / HIT T4.5 20W G8.5 211 Aluminum Narrow 12˚ XV 120V 60Hz 4 Black CB<br />
Centria Spike Mount LS422 ECG*<br />
39W 212 Medium 30˚ XW 277V 60Hz 9 White<br />
CW<br />
70W 213 Flood 54˚ XX Silver CS<br />
* ECG - Electronic Control Gear Wide flood 74˚ XY<br />
LED Version<br />
4<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code VOLTAGE Code FINISH<br />
Code<br />
Centria Surface Mount LED LS432LED LED 34W White (5 300K typ.) 34W3 Narrow 10˚ N 120V 60Hz 4 Black CB<br />
Centria Spike Mount LED LS422LED Warm white (3 300K typ.) 34H3 Medium 28˚ M White CW<br />
Blue (470nm) 34B2 Silver<br />
CS<br />
LUXEON K2 LED used
58 LS421 / LS421LED Centria<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP66<br />
IP67<br />
The LS421 is one of the most compact and versatile surface mount luminaires in its<br />
class, featuring integral electronic control gear. It is designed for all hard surfaces in<br />
any orientation. Choices of lamps, beam angles, light and glare control accessories<br />
are available.<br />
Specifications<br />
Lamp source<br />
LS421<br />
Lamp source<br />
LS421LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
20W, 39W, 70W MH / HIT T4.5 (G8.5)<br />
34W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For RGB consult factory<br />
Suitable for wet locations<br />
IP66 / IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
Surface mount<br />
Electronic control gear / driver<br />
20W, 39W -4°F to 122°F (-20°C to +50°C)<br />
70W -4°F to 104°F (-20°C to +40°C)<br />
LED -4°F to 122°F (-20°C to +50°C)<br />
2 year structural, 1 year electrical<br />
LS6065 Linear spreader lens except for 28° LED<br />
LS6066 Prismatic lens MH / HIT only<br />
LS6067 Concentric louver except for 10° LED<br />
LS6064 - R / G / B / Y Dichroic filters MH / HIT only<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W MH / HIT T4.5<br />
34W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
10.0in (255mm)<br />
2.6in (65mm)<br />
5˚<br />
7.0in (178mm)<br />
LS421 / LS421LED Centria<br />
Ø 4.3in (110mm)<br />
105˚<br />
10˚<br />
365˚<br />
MH / HIT Version<br />
LS421<br />
PRODUCT Code LAMP WATTAGE BASE Code REFLECTOR BEAM Code VOLTAGE Code FINISH Code<br />
Centria Surface Mount LS421 MH / HIT T4.5 20W G8.5 211 Aluminum Narrow 12˚ XV 120V 60Hz 4 Black CB<br />
ECG*<br />
39W 212 Medium 30˚ XW 277V 60Hz 9 White CW<br />
70W 213 Flood 54˚ XX Silver CS<br />
* ECG - Electronic Control Gear Wide flood 74˚ XY<br />
LED Version<br />
LS421LED 4<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code VOLTAGE Code FINISH Code<br />
Centria Surface Mount LED LS421LED LED 34W White (5 300K typ.) 34W3 Narrow 10˚ N 120V 60Hz 4 Black CB<br />
Warm white (3 300K typ.) 34H3 Medium 28˚ M White CW<br />
Blue (470nm) 34B2 Silver CS<br />
LUXEON K2 LED used
LS431 / LS431LED Centria<br />
Refer to Symbol Index on page 2 for explanation<br />
Spotlight & Floodlight<br />
59<br />
IP66<br />
IP67<br />
The LS431 is a remote gear, surface mount luminaire, suitable for use where the<br />
control gear can be conveniently housed close by. It is designed for all hard surfaces<br />
in any orientation. It is a low profile luminaire, which can be desirable in many<br />
architectural lighting applications. Choices of lamps, beam angles, light and glare<br />
control accessories are available.<br />
Specifications<br />
Lamp source<br />
LS431<br />
Lamp source<br />
LS431LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
20W, 39W, 70W MH / HIT T4.5 (G8.5)<br />
34W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For RGB consult factory<br />
Suitable for wet locations<br />
IP66 / IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
Surface mount<br />
20W, 39W -4°F to 122°F (-20°C to +50°C)<br />
70W -4°F to 104°F (-20°C to +40°C)<br />
LED -4°F to 122°F (-20°C to +50°C)<br />
2 year structural, 1 year electrical<br />
LS6065 Linear spreader lens except for 28° LED<br />
LS6066 Prismatic lens MH / HIT only<br />
LS6067 Concentric louver except for 10° LED<br />
LS6064 - R / G / B / Y Dichroic filters MH / HIT only<br />
LS6097 Remote constant current driver LED only<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W MH / HIT T4.5<br />
34W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS431 Centria<br />
Remote gear required<br />
Order separately<br />
9.3in (237mm)<br />
1.8in (46mm)<br />
5˚<br />
365˚<br />
Ø 5.5in (140mm)<br />
LS431LED Centria<br />
Remote gear required<br />
Order separately<br />
Ø 4.3in (110mm)<br />
105˚<br />
10˚<br />
MH / HIT Version<br />
LS431<br />
230<br />
R<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE BASE Code<br />
REFLECTOR BEAM Code<br />
CONTROL GEAR<br />
Code<br />
FINISH<br />
Code<br />
Centria Surface Mount<br />
Remote Gear<br />
LS431<br />
MH / HIT T4.5<br />
ECG*<br />
* ECG - Electronic Control Gear<br />
20W / 39W / 70W G8.5<br />
230<br />
Aluminum Narrow 12˚ XV<br />
Medium 30˚ XW<br />
Flood 54˚ XX<br />
Wide flood 74˚ XY<br />
Remote ECG*.<br />
Black<br />
R<br />
Order separately<br />
White<br />
* ECG - Electronic Control Gear<br />
Silver<br />
CB<br />
CW<br />
CS<br />
LED Version<br />
LS431LED<br />
R<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
BEAM<br />
Code<br />
LED DRIVER<br />
Code<br />
FINISH<br />
Code<br />
Centria Surface Mount<br />
Remote Gear LED<br />
LS431LED<br />
LED 34W White (5 300K typ.) 34W3<br />
Warm white (3 300K typ.) 34H3<br />
Blue (470nm)<br />
34B2<br />
LUXEON K2 LED used<br />
Narrow 10˚ N<br />
Medium 28˚ M<br />
Remote constant<br />
current driver<br />
required LS6097.<br />
Order separately<br />
R<br />
Black<br />
White<br />
Silver<br />
CB<br />
CW<br />
CS
60 LS461 Omnio<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP67<br />
The LS461 is a high performance spotlight utilizing PureOptics reflectors, the<br />
glass dichroic reflector technology pioneered by <strong>Lumascape</strong>. The PureOptics<br />
reflectors are engineered to provide maximum efficiency and performance over a<br />
long service life. Choices of beam angles, light and glare control accessories are<br />
available, together with lockable pan / tilt adjustment. Excellent glare control is<br />
achieved without loss of light.<br />
Specifications<br />
Lamp source 39W, 70W MH / HIT T6 (G12)<br />
39W, 70W MH PAR 30 (E26 medium)<br />
100W PAR30 (E26 medium)<br />
UL classification Suitable for wet locations<br />
LS461-xxx-xx-R-x-x-xx<br />
Omnio Remote Control Gear<br />
& HAL PAR<br />
14.9in (380mm)<br />
4.8in (122mm)<br />
0.2in (7mm)<br />
365 o<br />
15 o 115 o<br />
10 o<br />
Ø 2.4in (62mm)<br />
Ø 4.3in (108mm)<br />
4.7in (120mm)<br />
IP rating<br />
IP67<br />
Construction<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
365 o Ø 2.4in (62mm)<br />
Installation types<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Surface mount<br />
Spike mount<br />
Pole mount<br />
Signage mount<br />
High efficiency PureOptics reflector<br />
Silicone handgrip to allow hot focusing<br />
-4°F to 122°F (-20°C to +50°C)<br />
14.9in (380mm)<br />
4.8in (122mm)<br />
0.2in (7mm)<br />
15 o 115 o<br />
10 o<br />
4 .7in ( 120mm )<br />
Warranty<br />
Accessories<br />
Order separately<br />
5 year structural, 1 year electrical<br />
Refer to page 61<br />
LS461-xxx-xx-Q-x-x-xx<br />
Omnio Integral Control Gear<br />
Ø 4.3in (108mm)<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS461<br />
LAMP WATTAGE BASE Code<br />
REFLECTOR BEAM Code<br />
GEAR LOCATION<br />
Code<br />
MOUNTING<br />
Code<br />
VOLTAGE<br />
Code<br />
FINISH<br />
Code<br />
MH / HIT T6 39W G12 226<br />
MH / HIT T6 70W G12 225<br />
MH / PAR30 39W E26 med. 226<br />
MH / PAR30 70W E26 med. 225<br />
PAR20 / 30 75W max E26 med. 252<br />
PureOptics Narrow 10° AV<br />
PureOptics Medium 18° AW<br />
PureOptics Flood 48° AX<br />
PureOptics Wide 60°<br />
AY<br />
Flood<br />
Adjustable PAR20 / 30<br />
Adjustable PAR20 / 30<br />
AR<br />
AR<br />
Integral ECG*<br />
Remote ECG* LS6090<br />
Order separately<br />
Integral ECG*<br />
Remote ECG* LS6090<br />
Order separately<br />
Line voltage<br />
120V 60Hz only<br />
* ECG - Electronic Control Gear<br />
Q<br />
R<br />
Q<br />
R<br />
R<br />
Surface Mount<br />
Spike mount<br />
LS6054 required<br />
Pole clamp<br />
LS6023-1 or<br />
LS6023-2 required<br />
Signage pole<br />
LS6025 required<br />
Accessories must be<br />
ordered separately<br />
A<br />
B<br />
120V 60Hz 4<br />
277V 60Hz 9<br />
Black<br />
White<br />
Silver<br />
CB<br />
CW<br />
CS
LS461 Accessories<br />
Spotlight & Floodlight<br />
61<br />
Optical Accessories<br />
Filters and Lenses<br />
LS689 - R / G / B / Y<br />
Dichroic color filter<br />
LS690 Prismatic lens<br />
to soften the beam<br />
LS6018 Lenticuled lens<br />
to broaden the beam by<br />
approximately 10-30%<br />
depending on reflector<br />
LS6029 Linear spreader lens to<br />
elongate the beam in one plane<br />
NOTE: You may select a maximum of<br />
three of the above accessories<br />
Mounting Option Accessories<br />
LS6025 Signage Mount<br />
17.7in (450mm)<br />
LS6023-1 Pole Clamp<br />
44.0in (1120mm)<br />
Hole centers<br />
4.3in (110mm)<br />
square<br />
5.9in<br />
(150mm)<br />
square<br />
LS6023-2 Double Pole Clamp<br />
LS6022 Accessory cassette<br />
required only for PAR lamps to<br />
hold internal accessories: filters,<br />
lenses and glare control<br />
Clamp range<br />
1.5in - 3.0in pole dia<br />
(38mm - 78mm pole dia)<br />
Clamp range<br />
1.5in - 3.0in pole dia<br />
(38mm - 78mm pole dia)<br />
LS6054 Groundmount Spike / Concrete Anchor<br />
Available in black only<br />
Glare Shields<br />
19.7in<br />
( 500m m)<br />
19.7in<br />
( 500m m)<br />
LS6027 Straight LS6027 S<br />
Custom length Custom available le<br />
Finish Options For Accessories<br />
Black, White and Silver powdercoat<br />
LS6028 45° LS6028 45<br />
Custom length Custom and len<br />
angle available Rotatable a<br />
Rotatable and<br />
lockable<br />
ACCESSORY Code FINISH Code<br />
Signage system LS6025 Powdercoated: Black CB<br />
Pole clamp LS6023 Powdercoated: White CW<br />
Double pole clamp LS6023-2 Powdercoated: Silver CS<br />
Groundmount spike / concrete anchor<br />
Available in black only<br />
LS6054
62 LS411 / LS411LED Omnio Mini<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP67<br />
The LS411 is a compact and adjustable luminaire featuring metal halide, LED and<br />
halogen lamp options with an aesthetically pleasing form. This unit is particularly<br />
popular when spike mounted. It is also suited for architectural spotlighting and<br />
signage applications.<br />
Specifications<br />
Lamp source<br />
LS411<br />
Lamp source<br />
LS411LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation types<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
20W<br />
50W max<br />
MH / HIT MR16 (GX10)<br />
MR16 (GU5.3)<br />
9W or 18W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
Suitable for wet locations<br />
IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
Surface mount<br />
Spike mount<br />
Pole mount<br />
Signage mount<br />
Internal glare control louver<br />
Silicone handgrip to allow hot focusing<br />
Integral transformer / electronic control gear<br />
line voltage only<br />
-4°F to 122°F (-20°C to +50°C)<br />
2 year structural, 1 year electrical<br />
Refer to page 63<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
9W, 18W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
12.7in (323mm)<br />
LS411 / LS411LED Omnio Mini<br />
360 o<br />
100˚<br />
100˚<br />
Ø 4.3in (108mm)<br />
Ø 2.4in (62mm)<br />
(6.9in) 175mm<br />
MH / HIT Version<br />
For LED version of this product refer to page 63<br />
LS411<br />
LAMP WATTAGE BASE Code<br />
MR16 12V lamp 35W IRC max GU5.3 295<br />
MH / MR16 20W GX10 227<br />
VOLTAGE<br />
Code<br />
12V<br />
Remote transformer only<br />
8<br />
120V 60Hz 4<br />
120V 60Hz 4<br />
277V 60Hz 9<br />
MOUNTING Code FINISH Code<br />
Surface Mount A Black CB<br />
Spike mount<br />
White CW<br />
LS6054 required<br />
Silver CS<br />
Pole clamp<br />
LS6023-1 or LS6023-2 required<br />
Signage pole<br />
LS6025 required<br />
B<br />
Accessories must be ordered separately
LS411 Accessories<br />
Spotlight & Floodlight<br />
63<br />
Optical Accessories<br />
Filters and Lenses<br />
LS643 - R / G / B / Y<br />
Dichroic color filter For R16 only<br />
LLLS Linear spreader lens to<br />
elongate the beam in one plane<br />
Mounting Option Accessories<br />
LS6025 Signage Mount<br />
17.7in (450mm)<br />
Hole centers<br />
4.3in (110mm)<br />
square<br />
44.0in (1120mm)<br />
5.9in<br />
(150mm)<br />
square<br />
LS6023-1 Pole Clamp<br />
LS6023-2 Double Pole Clamp<br />
Clamp range<br />
1.5in - 3.0in pole dia<br />
(38mm - 78mm pole dia)<br />
Clamp range<br />
1.5in - 3.0in pole dia<br />
(38mm - 78mm pole dia)<br />
LS6054 Groundmount Spike / Concrete Anchor<br />
Available in black only<br />
Finish Options For Accessories<br />
Black, White and Silver powdercoat<br />
ACCESSORY Code FINISH Code<br />
Signage system LS6025 Powdercoated: Black CB<br />
Pole clamp LS6023 Powdercoated: White CW<br />
Double pole clamp LS6023-2 Powdercoated: Silver CS<br />
Groundmount spike / concrete anchor<br />
Available in black only<br />
LS6054<br />
LED Version<br />
For MH / HIT version of this product refer to page 62<br />
LS411LED<br />
LAMP WATTAGE COLOR Code BEAM Code<br />
VOLTAGE<br />
Code<br />
MOUNTING<br />
Code<br />
FINISH<br />
Code<br />
LED 9W White (5 300K typ.) 9W3 Narrow 10° N<br />
Warm white (3 300K typ.) 9H3 Medium 28° M<br />
Blue (470nm) 9B2 Linear spreader 12° x 32° L<br />
18W White (5 300K typ.) 18W3<br />
Warm white (3 300K typ.) 18H3<br />
Blue (470nm)<br />
18B2<br />
LUXEON K2 LED used<br />
120V 60Hz 4<br />
700mA constant<br />
current remote driver.<br />
R<br />
9W order LS6098<br />
18W order LS6099<br />
Surface mount<br />
Spike mount<br />
LS6054 required<br />
Pole clamp<br />
LS6023-1 or LS6023-2 required<br />
Signage pole LS6025 required<br />
Accessories must be ordered separately<br />
A<br />
B<br />
Black<br />
White<br />
Silver<br />
CB<br />
CW<br />
CS
64 LS341<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS341 is a high grade surface mount luminaire, ideal where temporary<br />
submersion makes other luminaires unsuitable. The 316 marine grade stainless steel<br />
housing and bracket provides long life even in the harshest conditions. Availability<br />
of PureOptics, choices of lamp type, different beam angles and accessories make<br />
this a versatile luminaire suitable for a wide range of applications.<br />
Specifications<br />
Lamp source 39W, 70W MH / HIT T6 (G12)<br />
39W, 70W MH R111 (GX8.5)<br />
39W, 70W MH PAR 30 (E26 medium)<br />
18W CFL / TC-TEL (G24-q2)<br />
26W, 32W CFL / TC-TEL (G24-q3)<br />
50W, 70W HPS / HSE (E26 medium)<br />
75W max HAL R111 (G53)<br />
75W max PAR 20 - 38 (E26 medium)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Surface mount<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing dessicant<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural ,1 year electrical<br />
Refer to pages 14-15<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
39W MH / HIT T6<br />
18W, 26W CFL / TC-TEL<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
16.3in ( 415mm )<br />
Ø10.1in (256mm)<br />
LS341<br />
180 o<br />
Surface Mount J-Box<br />
For bracket mount installation only<br />
Supplied with cable 2.3ft (0.7m)<br />
connected to 4 way J-Box
LS341<br />
Spotlight & Floodlight<br />
65<br />
Product<br />
Code<br />
LS341<br />
Lamp<br />
Code<br />
Optical<br />
System<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
OPTICAL SYSTEM<br />
SUPPLY VOLTAGE<br />
Description Wattage Base Code<br />
Description Reflector Beam Code<br />
Voltage<br />
Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
MH / HIT T6 39W G12 226<br />
ECG* 70W G12 225<br />
MH / PAR 30 39W E26 med. 226<br />
ECG* 70W E26 med. 225<br />
MH / PAR 30 39W E26 med. 223<br />
MH / PAR 38 70W E26 med. 221<br />
MH R111 39W GX8.5 226<br />
MH R111 70W GX8.5 219<br />
PAR 20 - 38 75W max E26 med.<br />
120V only<br />
252<br />
HPS / HSE 50W E26 med. 231<br />
70W E26 med. 232<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG* 26W, 32W GX24q-3 262<br />
HAL R111 75W max G53 291<br />
* ECG - Electronic Control Gear<br />
Adjustable PureOptics Narrow 10˚ AV 1<br />
Medium 18˚ AW 1<br />
Flood 48˚ AX 1<br />
Wide flood 60˚ AY 1<br />
Adjustable Aluminum Narrow 10˚ XV 2<br />
Fixed<br />
Asymmetric<br />
aluminum<br />
wallwash<br />
Medium 28˚ XW 2<br />
Flood 70˚ XX 2<br />
Wide flood 140˚ XY 2<br />
Very narrow XQ 4<br />
Wide XT 4<br />
Ultra wide XP 4<br />
Adjustable PAR 20 / 30 AR 3<br />
Fixed PAR 38 AS 3<br />
Fixed PureOptics Flood 110˚ AM 3<br />
Adjustable Aluminum Flood 140˚ XM 2<br />
Fixed PureOptics Flood 110˚ AL 3<br />
Adjustable Aluminum Flood 140˚ XL 2<br />
Fixed Asymmetric Flood XN 4<br />
Adjustable AJ 3<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for<br />
PAR20 / PAR30 / PAR38 / HAL R111<br />
9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 14-15.
66 LS361<br />
Spotlight & Floodlight<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS361 is a high grade surface mount luminaire, ideal where temporary<br />
submersion makes other luminaires unsuitable. The 316 marine grade stainless steel<br />
housing and bracket provides long life even in the harshest conditions. Choices of<br />
lamp type, different beam angles and accessories make this a versatile luminaire<br />
suitable for a wide range of applications.<br />
Specifications<br />
Lamp source 20W MH / HIT T4 (PGJ5)<br />
50W max MR16 (GU5.3)<br />
18W CFL / TC-T (GX24q-2)<br />
26W CFL / TC-T (GX24q-3)<br />
75W max PAR 30 / 38 (E26 medium)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Surface mount<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Glass temperature<br />
≤149°F (≤65°C)<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing dessicant<br />
32°F to 122°F (0°C to 40°C)<br />
10 year structural, 1 year electrical<br />
Refer to pages 36-37<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W MH / HIT T4.5<br />
18W CFL / TC-T<br />
Refer to page 4 for more details<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
9.4in ( 238mm )<br />
LS361<br />
Ø8.0in (204mm)<br />
300 o<br />
Surface Mount J-Box<br />
For bracket mount installation only<br />
Supplied with cable 2.3ft (0.7m)<br />
connected to 4 way J-Box<br />
Product<br />
Code<br />
LS361<br />
Lamp<br />
Code<br />
Optical<br />
System<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4.5 20W G8.5<br />
ECG*<br />
211<br />
PAR 30 / 38 75W max E26 med.<br />
120V only<br />
252<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG*<br />
26W GX24q-3 262<br />
HAL MR16 50W max GU5.3 292<br />
* ECG - Electronic Control Gear<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable Aluminum Narrow 12˚ XV 1<br />
Medium 30˚ XW 1<br />
Flood 54˚ XX 1<br />
Wide flood 74˚ XY 1<br />
Adjustable PAR 30 / 38 XS 4<br />
Fixed Aluminum Flood 140˚ XL 3<br />
Adjustable MR16 XK 2<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for PAR 30 / 38 9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 36-37.
68<br />
underwater
LS333ANS-2 / LS333ANS-LED Pool Luminaire<br />
Refer to Symbol Index on page 2 for explanation<br />
Underwater<br />
IP68<br />
69<br />
The LS333ANS-2 is a swimming pool light and one of <strong>Lumascape</strong>’s most popular<br />
luminaires, constructed entirely of 316 marine grade stainless steel. It has a special<br />
alignment feature to ensure the beam of light is perpendicular to the installation<br />
surface, even if the pre-installation blockout niche is not. An LED alternative to<br />
the halogen lamp option allows for the creative introduction of color and improved<br />
energy efficiency.<br />
Specifications<br />
Lamp source<br />
LS333ANS-2<br />
Lamp source<br />
LS333ANS-LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusions<br />
75W<br />
MR16 (GU5.3)<br />
3W or 8W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
Submersible<br />
IP68<br />
316 marine grade stainless steel<br />
Pre-installation blockout niche<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
16.4ft (5m) underwater cable<br />
For extra cable length consult factory<br />
Ø 4.5in (115mm)<br />
LS333ANS-2<br />
Pool Luminaire<br />
4.7in (120mm)<br />
LS333ANS-LED<br />
Pool Luminaire<br />
3.1in (80mm)<br />
0.1in (3mm)<br />
Ø 4.3in (110mm)<br />
Ø 5.1in (130mm)<br />
Ambient operating<br />
temperature<br />
41°F to 104°F (5°C to 40°C)<br />
Warranty<br />
5 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
LLLS Linear spreader lens MR16 only<br />
LS643 - R / G / B / Y Dichroic filters MR16 only<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Halogen Version<br />
LS333ANS-2<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code<br />
Pool Luminaire MR16 75W max GU5.3 12V LS333ANS-2<br />
LED Version<br />
LS333ANS-LED<br />
PRODUCT Code LAMP WATTAGE VOLTAGE COLOR Code BEAM Code<br />
Pool Luminaire LED LS333ANS-LED LED 3W 12V 60Hz White (5 300K typ.) 3W3 Narrow 8˚ N<br />
Wire wound<br />
transformer<br />
Warm white (3 300K typ.) 3H3 Medium 28˚ M<br />
Blue (470nm) 3B2 Flood 46˚ F<br />
8W White (5 300K typ.) 8W3<br />
Warm white (3 300K typ.) 8H3<br />
Blue (470nm)<br />
8B2<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104
(<br />
70 LS275A / LS275LED Star II<br />
Underwater<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS275 is a compact, surface mounted fountain light with a long history in high<br />
performance applications. Constructed of high pressure diecast copper alloy, this<br />
luminaire is best known for its corrosion resistance and flawless performance. An<br />
LED alternative to the halogen lamp option allows for the creative introduction of<br />
color and improved energy efficiency.<br />
Specifications<br />
Lamp source<br />
LS275A<br />
Lamp source<br />
LS275LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
75W<br />
MR16 (GU5.3)<br />
3W or 8W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
Submersible<br />
IP68<br />
Diecast copper alloy<br />
Surface mount<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
16.4ft (5m) underwater cable<br />
For extra cable length consult factory<br />
41°F to 104°F (5°C to 40°C)<br />
5 year structural, 1 year electrical<br />
LS632 Mounting plate<br />
LLLS Linear spreader lens MR16 only<br />
LS643 - R / G / B / Y Dichroic filters MR16 only<br />
Refer to www.lumascape.com<br />
LS275A Star II<br />
1mm<br />
3 .4in (87mm)<br />
Ø 2.6in ( 65mm)<br />
Ø 175mm<br />
Ø 2 )<br />
.9in ( 75mm<br />
180 o<br />
LS632 Mounting Plate<br />
LS275LED Star II<br />
5 .3in 136mm )<br />
Halogen Version<br />
LS275A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code<br />
Star II MR16 75W max GU5.3 12V LS275A<br />
LED Version<br />
LS275LED<br />
13<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code<br />
Star II LED LS275LED LED 3W White (5 300K typ.) 3W3 Narrow 8˚ N<br />
Warm white (3 300K typ.) 3H3 Medium 28˚ M<br />
Blue (470nm) 3B2 Flood 46˚ F<br />
8W White (5 300K typ.) 8W3<br />
Warm white (3 300K typ.) 8H3<br />
Blue (470nm)<br />
8B2<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
VOLTAGE<br />
12V 60Hz<br />
Wire wound<br />
transformer<br />
Code<br />
13
LS265LED Tristar<br />
Refer to Symbol Index on page 2 for explanation<br />
Underwater<br />
IP68<br />
71<br />
The LS265LED is a high performance fountain light utilizing LED technology. The<br />
durable <strong>Lumascape</strong> 316 marine grade stainless steel underwater luminaire and long<br />
life LED source are an ideal combination. The single color version is designed to<br />
operate on standard 12V AC magnetic transformers making the installation as simple<br />
as other low voltage underwater luminaires. The LS265LED has the added advantage<br />
of being supplied factory sealed, with no requirement to open the luminaire during<br />
installation. This luminaire can also operate in very shallow water.<br />
Specifications<br />
Lamp source 36W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
For RGB consult factory<br />
UL classification Submersible<br />
IP rating<br />
IP68<br />
LS265LED Tristar<br />
Underwater version<br />
220º<br />
3.2in (82mm)<br />
Construction<br />
316 marine grade stainless steel<br />
Ø 8.0in (203mm)<br />
Installation type<br />
Standard inclusions<br />
Surface mount<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
16.4ft (5m) underwater cable<br />
For extra cable length consult factory<br />
11.2in (284mm)<br />
Ambient operating<br />
temperature<br />
41°F to 104°F (5°C to 40°C)<br />
Warranty<br />
5 year structural, 1 year electrical<br />
Accessory<br />
Order separately<br />
LS6074 Mounting plate<br />
Photometrics<br />
Refer to www.lumascape.com<br />
0.1in (3mm)<br />
0.6in (15mm)<br />
Ø 7.9in (200mm)<br />
LS6074 Mounting Plate<br />
LS265LED<br />
M<br />
PRODUCT Code LAMP WATTAGE VOLTAGE COLOR Code BEAM Code<br />
Tristar LED LS265LED LED 36W 12V 60Hz White (5 300K typ.) 36W3 Medium 28˚ M<br />
Wire wound<br />
transformer<br />
Warm white (3 300K typ.) 36H3<br />
Blue (470nm)<br />
36B2<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104
72 LS265A-1 Tristar / LS265A-3 Halostar<br />
Underwater<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS265A is a series of high performance fountain luminaires ideally suited to<br />
applications where reliability is of utmost importance. The 316 marine grade stainless<br />
steel construction and guaranteed IP68 rating ensures a long and uninterrupted<br />
service life, proven over the years in projects around the world. With choices in<br />
lamp types, adjustability and availability of a mounting plate, versatility is another<br />
key aspect of these luminaires. These luminaires can also operate in very shallow<br />
water.<br />
Specifications<br />
Lamp source<br />
LS265A-1<br />
Lamp source<br />
LS265A-1G<br />
3 x 50W max MR16 (GU5.3)<br />
Suitable for constant submersion<br />
3 x 20W max MR16 (GU5.3)<br />
Suitable for constant or occasional submersion<br />
LS265A-1 Tristar<br />
Underwater version<br />
LS265A-3 Halostar<br />
Underwater version<br />
Lamp source<br />
LS265A-3<br />
UL classification<br />
IP rating<br />
100W HAL R111 (G53)<br />
Suitable for constant or occasional submersion<br />
Submersible<br />
IP68<br />
220º<br />
3.2in (82mm)<br />
Construction<br />
316 marine grade stainless steel<br />
Ø 8.0in (203mm)<br />
Installation type<br />
Standard inclusions<br />
Surface mount<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
16.4ft (5m) underwater cableTristar underwater only<br />
2.4ft (0.75m) underwater cable and<br />
weatherproof splice box<br />
Tristar groundmount only<br />
For extra cable length consult factory<br />
11.2in (284mm)<br />
Ambient operating<br />
temperature<br />
41°F to 104°F (5°C to 40°C)<br />
Warranty<br />
5 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
LS6074 Mounting plate<br />
LLLS Linear spreader lens LS265A-1 only<br />
LS643 - R / G / B / Y Dichroic filters LS265-1 only<br />
0.1in (3mm)<br />
0.6in (15mm)<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
Ø 7.9in (200mm)<br />
LS6074 Mounting Plate<br />
LS265A-1<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE FINISH Code<br />
Tristar Underwater MR16 3 x 50W max GU5.3 12V Stainless steel LS265A-1<br />
Tristar Groundmount MR16 3 x 20W max GU5.3 12V Powdercoated: Black LS265A-1G<br />
LS265A-3<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE FINISH Code<br />
Halostar Underwater HAL R111 100W max G53 12V Stainless steel LS265A-3<br />
Halostar Groundmount HAL R111 100W max G53 12V Powdercoated: Black LS265A-3G
(<br />
LS475A Pond Monster<br />
Refer to Symbol Index on page 2 for explanation<br />
Underwater<br />
IP68<br />
73<br />
The LS475A is an ‘underwater candle’, used to light the body of water or to backlight<br />
objects on the water’s surface. The optional base provides for a full range of<br />
positioning to suit any application. Without the base, the luminaire can be located<br />
amongst rocks or other objects to give a less structured appearance of light.<br />
Specifications<br />
Lamp source 20W - 90W HAL Bi-pin (G4 / GY6.35)<br />
UL classification Submersible<br />
IP rating<br />
IP68<br />
Construction<br />
Nickel plated copper alloy<br />
Installation type Surface mount<br />
Standard inclusions MicroAntiLeach cable entry<br />
Thermal cutout<br />
16.4ft (5m) underwater cable<br />
Ambient operating 41°F to 104°F (5°C to 40°C)<br />
temperature<br />
Warranty<br />
5 year structural, 1 year electrical<br />
Accessory<br />
LS679 Mounting plate<br />
Order separately<br />
LS475A with<br />
LS679 Pond Monster Mounting Plate<br />
Pond Monster Mounting Plate sold separately<br />
Ø 1.2in ( 32mm)<br />
4 .8in 124mm )<br />
6.4in ( 162mm )<br />
4.2in (106mm)<br />
110<br />
o<br />
6.3in (160mm)<br />
LS679 Pond Monster<br />
Mounting Plate<br />
LS475A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code<br />
Pond Monster HAL Bi-pin / QT12 90W max G4 / GY6.35 12V LS475A
74 LS345<br />
Underwater<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS345 is a high grade surface mount underwater luminaire, ideal for use in harsh<br />
environments such as seawater or where high power lamps are required. The 316<br />
marine grade stainless steel housing is totally sealed and has a rating equivalent to<br />
submersion up to 30ft (10m) underwater. Availability of PureOptics, choices of<br />
lamp type, different beam angles and accessories make this a versatile luminaire<br />
suitable for a wide range of underwater applications.<br />
Specifications<br />
Lamp source 39W, 70W MH / HIT T6 (G12)<br />
39W, 70W MH R111 (GX8.5)<br />
39W, 70W MH PAR 30 (E26 medium)<br />
18W CFL / TC-TEL (G24-q2)<br />
26W, 32W CFL / TC-TEL (G24-q3)<br />
50W, 70W HPS / HSE (E26 medium)<br />
75W max HAL R111 (G53)<br />
75W max PAR 20 - 38 (E26 medium)<br />
UL classification Submersible<br />
IP rating<br />
IP68<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Surface mount<br />
Standard inclusions<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Order separately<br />
Photometrics<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing dessicant<br />
16.4ft (5m) underwater cable<br />
For extra cable length consult factory<br />
41°F to 104°F (5°C to 40°C)<br />
10 year structural, 1 year electrical<br />
Refer to pages 14-15<br />
Refer to www.lumascape.com<br />
16.3in ( 415mm )<br />
Ø10.1in (256mm)<br />
LS345<br />
180 o<br />
16.4ft (5m) factory fitted flexible<br />
underwater cable supplied
LS345<br />
Underwater<br />
75<br />
Product<br />
Code<br />
LS341<br />
Lamp<br />
Code<br />
Optical<br />
System<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
OPTICAL SYSTEM<br />
SUPPLY VOLTAGE<br />
Description Wattage Base Code<br />
Description Reflector Beam Code<br />
Voltage<br />
Code<br />
MH / HIT T6 39W G12 223<br />
70W G12 221<br />
MH / HIT T6 39W G12 226<br />
ECG* 70W G12 225<br />
MH / PAR 30 39W E26 med. 226<br />
ECG* 70W E26 med. 225<br />
MH / PAR 30 39W E26 med. 223<br />
MH / PAR 38 70W E26 med. 221<br />
MH R111 39W GX8.5 226<br />
MH R111 70W GX8.5 219<br />
PAR 20 - 38 75W max E26 med.<br />
120V only<br />
252<br />
HPS / HSE 50W E26 med. 231<br />
70W E26 med. 232<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG* 26W, 32W GX24q-3 262<br />
HAL R111 75W max G53 291<br />
* ECG - Electronic Control Gear<br />
Adjustable PureOptics Narrow 10˚ AV 1<br />
Medium 18˚ AW 1<br />
Flood 48˚ AX 1<br />
Wide flood 60˚ AY 1<br />
Adjustable Aluminum Narrow 10˚ XV 2<br />
Fixed<br />
Asymmetric<br />
aluminum<br />
wallwash<br />
Medium 28˚ XW 2<br />
Flood 70˚ XX 2<br />
Wide flood 140˚ XY 2<br />
Very narrow XQ 4<br />
Wide XT 4<br />
Ultra wide XP 4<br />
Adjustable PAR 20 / 30 AR 3<br />
Fixed PAR 38 AS 3<br />
Fixed PureOptics Flood 110˚ AM 3<br />
Adjustable Aluminum Flood 140˚ XM 2<br />
Fixed PureOptics Flood 110˚ AL 3<br />
Adjustable Aluminum Flood 140˚ XL 2<br />
Fixed Asymmetric Flood XN 4<br />
Adjustable AJ 3<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for<br />
PAR20 / PAR30 / PAR38 / HAL R111<br />
9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 14-15.
76 LS365<br />
Underwater<br />
Refer to Symbol Index on page 2 for explanation<br />
IP68<br />
The LS365 is a high grade surface mount underwater luminaire, ideal for use in harsh<br />
environments such as seawater. The 316 marine grade stainless steel housing is<br />
totally sealed and has a rating equivalent to submersion up to 30ft (10m) underwater.<br />
Choices of lamp type, including 20W metal halide, different beam angles and<br />
accessories make this a versatile luminaire suitable for a wide range of underwater<br />
applications.<br />
Specifications<br />
Lamp source 20W MH / HIT T4 (PGJ5)<br />
50W max MR16 (GU5.3)<br />
18W CFL / TC-T (GX24q-2)<br />
26W CFL / TC-T (GX24q-3)<br />
70W max PAR 30 / 38 (E26 medium)<br />
LS365<br />
UL classification<br />
IP rating<br />
Submersible<br />
IP68<br />
Ø8.0in (204mm)<br />
300 o<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type<br />
Standard inclusions<br />
Surface mount<br />
Teflon coated cover screws<br />
MicroAntiLeach cable entry<br />
Thermal cutout<br />
Humidity absorbing dessicant<br />
16.4ft (5m) underwater cable<br />
For extra cable length consult factory<br />
9.4in ( 238mm )<br />
Ambient operating<br />
temperature<br />
41°F to 104°F (5°C to 40°C)<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
Refer to pages 36-37<br />
Photometrics<br />
Refer to www.lumascape.com<br />
16.4ft (5m) factory fitted flexible<br />
underwater cable supplied<br />
Product<br />
Code<br />
LS365<br />
Lamp<br />
Code<br />
Optical<br />
System<br />
Code<br />
Supply<br />
Voltage<br />
Code<br />
LAMP<br />
Description Wattage Base Code<br />
MH / HIT T4.5 20W G8.5<br />
ECG*<br />
211<br />
PAR 30 / 38 75W max E26 med.<br />
120V only<br />
252<br />
CFL / TC-TEL 18W GX24q-2 266<br />
ECG*<br />
26W GX24q-3 262<br />
HAL MR16 50W max GU5.3 292<br />
* ECG - Electronic Control Gear<br />
OPTICAL SYSTEM<br />
Description Reflector Beam Code<br />
Adjustable Aluminum Narrow 12˚ XV 1<br />
Medium 30˚ XW 1<br />
Flood 54˚ XX 1<br />
Wide flood 74˚ XY 1<br />
Adjustable PAR 30 / 38 XS 4<br />
Fixed Aluminum Flood 140˚ XL 3<br />
Adjustable MR16 XK 2<br />
SUPPLY VOLTAGE<br />
Voltage<br />
Code<br />
120V 60Hz 4<br />
277V 60Hz Not suitable for PAR 30 / 38 9<br />
1<br />
2<br />
3<br />
4<br />
These numbers refer to the<br />
compatible accessories<br />
tables on pages 36-37.
78<br />
downlight
LS454A / LS454LED Aura<br />
Downlight<br />
79<br />
IP67<br />
The LS454 is a luminaire designed for use in external spaces where a recessed<br />
downlight is not practical. As an IP67 rated luminaire, the protection against water<br />
ingress is excellent, making it suitable for use in exterior applications. In both LED<br />
and halogen variants, the light output is diffused.<br />
Specifications<br />
Lamp source<br />
LS454A<br />
35W IRC HAL Bi-pin / QT12 (GY6.35)<br />
Lamp source<br />
LS454LED<br />
UL classification<br />
IP rating<br />
3W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
Suitable for wet locations<br />
IP67<br />
LS454A Aura<br />
Ø 4.0in ( 102mm)<br />
LS454LED Aura<br />
1.8in (48mm)<br />
Construction<br />
Installation type<br />
Standard inclusions<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
Surface ceiling mount<br />
Thermal cutout (for LS454A only)<br />
Toughened diffuser lens<br />
Ø 3.20in (81mm)<br />
Ambient operating<br />
temperature<br />
-4°F to 122°F (-20°C to +50°C)<br />
Warranty<br />
2 year structural, 1 year electrical<br />
Accessory<br />
LS6095 Constant current remote LED driver<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
Halogen Version<br />
LS454A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code FINISH Code<br />
Aura HAL Bi-pin / QT12 35W IRC max GY6.35 12V LS454A Black CB<br />
White CW<br />
Silver CS<br />
LED Version<br />
LS454LED<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE VOLTAGE Code<br />
COLOR Code FINISH Code<br />
Aura LED<br />
LS454LED<br />
LED 3W 12V 60Hz Wire wound transformer<br />
12-24V DC Ripple free regulated supply<br />
350mA constant current<br />
remote driver LS6095.<br />
Order separately<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
13<br />
R<br />
White (5 300K typ.) 3W3 Black CB<br />
Warm white (3 300K typ.) 3H3 White CW<br />
Blue (470nm) 3B2 Silver CS
80<br />
wallmount
LS471 / LS471LED Centria<br />
Refer to Symbol Index on page 2 for explanation<br />
Wallmount<br />
81<br />
IP66<br />
IP67<br />
The LS471 is the up/down column lighting version of the Centria series. It also<br />
performs well for illuminating large wall expanses. Reflectors with different beam<br />
angles can be fitted to each side. Integral electronic control gear is a standard feature<br />
of LS471. Choices of lamps, beam angles, light and glare control accessories are<br />
available.<br />
Specifications<br />
Lamp source<br />
LS471<br />
Lamp source<br />
LS471LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
2 x 20W MH / HIT T4.5 (G8.5)<br />
2 x 14W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For RGB consult factory<br />
Suitable for wet locations<br />
IP66 / IP67<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
Wall mount<br />
Electronic control gear / driver<br />
20W<br />
LED<br />
-4°F to 122°F (-20°C to +50°C)<br />
-4°F to 122°F (-20°C to +50°C)<br />
LS471 / LS471LED Centria<br />
83mm<br />
(3.3in)<br />
Ø 110mm<br />
(4.3in)<br />
Warranty<br />
2 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
LS6065 Linear spreader lens except for 28° LED<br />
LS6066 Prismatic lens MH / HIT only<br />
LS6067 Concentric louver except for 10° LED<br />
LS6064 - R / G / B / Y Dichroic filters MH / HIT only<br />
178mm (7.0in)<br />
278mm (10.9in)<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
HumanTouchcompliant model<br />
2 x 14W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
MH / HIT Version<br />
LS471<br />
211<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE BASE Code<br />
REFLECTOR BEAM Code VOLTAGE Code FINISH Code<br />
Centria Wall Up / Down<br />
LS471<br />
MH / HIT T4.5<br />
ECG*<br />
2 x 20W G8.5<br />
* ECG - Electronic Control Gear<br />
211<br />
Aluminum Narrow 12˚ XV 120V 60Hz 4 Black CB<br />
Medium 30˚ XW 277V 60Hz 9 White CW<br />
Flood 54˚ XX Silver<br />
CS<br />
Wide flood 74˚ XY<br />
LED Version<br />
LS471LED 4<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code VOLTAGE Code FINISH Code<br />
Centria Wall Up / Down LED LS471LED LED 2 x 14W White (5 300K typ.) 28W3 Narrow 10˚ N 120V 60Hz 4 Black CB<br />
Warm white (3 300K typ.) 28H3 Medium 28˚ M White CW<br />
Blue (470nm) 28B2 Silver CS<br />
LUXEON K2 LED used
82 LS371A / LS371LED Boulevard<br />
Wallmount<br />
Refer to Symbol Index on page 2 for explanation<br />
IP67<br />
The LS371A is a high pressure diecast brass luminaire featuring an IP67 rating. The<br />
LED version offers both line voltage and low voltage options, and is ideal where a<br />
lower surface temperature is required. Impressively, the 2W LED version generates<br />
virtually the same horizontal illuminance as the 20W halogen, making the LED a true<br />
performance based alternative.<br />
Specifications<br />
Lamp source<br />
LS371A<br />
Lamp source<br />
LS371 LED<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessory<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
20W<br />
Halogen QT9 (G4)<br />
2W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
Suitable for wet locations<br />
IP67<br />
Diecast brass<br />
Wall mount<br />
Thermal cutout LS371A only<br />
-4°F to 122°F (-20°C to +50°C)<br />
5 year structural, 1 year electrical<br />
LS6095 Constant current remote driver<br />
LS371LED only<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
2W LED<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS371A / LS371LED Boulevard<br />
2.50in (64mm)<br />
Ø 5.0in ( 127mm )<br />
Halogen Version<br />
LS371A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code FINISH Code<br />
Boulevard HAL Bi-pin QT9 20W max G4 12V LS371A Shot blasted standard --<br />
Polished brass<br />
P<br />
Satin chrome plated CP<br />
Powdercoated: Black CB<br />
Powdercoated: White CW<br />
Powdercoated: Silver CS<br />
LED Version<br />
LS371LED<br />
PRODUCT<br />
Code<br />
LAMP WATTAGE COLOR Code<br />
VOLTAGE<br />
Code<br />
FINISH<br />
Code<br />
Boulevard LED<br />
LS371LED<br />
LED 2W White (5 300K typ.) 2W3<br />
Warm white (3 300K typ.) 2H3<br />
Blue (470nm)<br />
2B2<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
120V 60Hz 4<br />
12V 60Hz Wire wound transformer<br />
13<br />
12-24V DC Ripple free regulated supply<br />
350mA constant current remote<br />
driver LS6095 required.<br />
R<br />
Order separately<br />
Shot blasted standard --<br />
Polished brass<br />
P<br />
Satin chrome plated CP<br />
Powdercoated: Black CB<br />
Powdercoated: White CW<br />
Powdercoated: Silver CS
LS381A Melia II<br />
Wallmount<br />
83<br />
IP67<br />
The LS381A is a luminaire that utilizes a 316 marine grade stainless steel housing<br />
with a high pressure diecast brass or aluminum powdercoated facia. It is designed<br />
for use in environments where the body of the luminaire is to be cast in place or<br />
otherwise permanently fixed. The luminaire is protected against overheating by the<br />
use of an integral thermal cutout.<br />
Specifications<br />
Lamp source 20W max MR16 (GU5.3)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP67<br />
Construction<br />
316 marine grade stainless steel and<br />
Diecast brass or powdercoated aluminum<br />
Installation type Wall mount<br />
Standard inclusion Thermal cutout<br />
Ambient operating -4°F to 122°F (-20°C to +50°C)<br />
temperature<br />
Warranty<br />
2 year structural aluminum powdercoated facia<br />
5 year structural brass facia<br />
1 year electrical<br />
Accessories<br />
Order separately<br />
Photometrics<br />
LLLS Linear spreader lens<br />
LS642 Copper hood<br />
LS642-C Powdercoated hood: aluminum<br />
LS624-CP Satin chrome hood: copper<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS381A - LCP Melia II<br />
Linished satin chrome<br />
LS642 Copper Hood<br />
Also available in satin chrome and<br />
powdercoat colors<br />
2.8in (70mm)<br />
0.4in ( 8.5mm)<br />
Ø 2.6in ( 67mm )<br />
Ø 4.4in ( 112mm )<br />
LS381A<br />
1.0in (25 mm)<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code FINISH Code<br />
Melia II MR16 20W max GU5.3 12V LS381A Shot blasted standard --<br />
Linished brass<br />
L<br />
Linished satin chrome LCP<br />
Black<br />
CB<br />
White<br />
CW<br />
Silver<br />
CS
84 LS441 Wedge / LS491 Moda<br />
Wallmount<br />
Refer to Symbol Index on page 2 for explanation<br />
IP65<br />
The LS441 and LS491 are wall mount luminaires with linear styling complementary<br />
to modern architectural designs. Both models, featuring screwless appearance,<br />
are available with a transformer base for line voltage wiring. For a more compact<br />
appearance a remote transformer can be used.<br />
Specifications<br />
Lamp source<br />
LS441<br />
35W max<br />
35W max<br />
MR16 IRC (GU5.3 low voltage lamp)<br />
MR16 (GU10 line voltage lamp)<br />
Lamp source<br />
LS491<br />
UL classification<br />
2 x 20W max MR16 (GU5.3 low voltage lamp)<br />
2 x 20W max MR16 (GU10 line voltage lamp)<br />
Suitable for wet locations<br />
LS441 Wedge<br />
LS491 Moda<br />
IP rating<br />
Construction<br />
IP65<br />
LM20 diecast marine grade powdercoated<br />
aluminum<br />
5.7in ( 136mm)<br />
3.0in ( 77mm)<br />
3.7in ( 93mm)<br />
Installation type<br />
Standard inclusions<br />
Wall mount<br />
Thermal cutout<br />
Toughened frosted glass lens<br />
7.7in ( 197mm )<br />
7.9in ( 202mm )<br />
Ambient operating<br />
temperature<br />
-4°F to 122°F (-20°C to +50°C)<br />
Warranty<br />
2 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
LS6050 Mounting plate for 4in J-Box<br />
LSTE4 Integral transformer<br />
LS441A and LSTE4<br />
Integral Transformer<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant<br />
20W max MR16<br />
2 x 20W max MR16<br />
5.2in ( 131mm)<br />
<br />
<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
7.7in ( 197mm )<br />
<br />
<br />
LS491A and LSTE4<br />
Integral Transformer<br />
LS441<br />
LS441<br />
<br />
PRODUCT Code LAMP WATTAGE BASE VOLTAGE Code FINISH Code<br />
Wedge LS441 MR16 35W IRC max GU5.3 12V 8 Black CB<br />
35W max GU10 120V 60Hz 4 White CW<br />
Silver CS<br />
<br />
<br />
LS491<br />
LS491<br />
PRODUCT Code LAMP WATTAGE BASE VOLTAGE Code FINISH Code<br />
Moda LS491 MR16 2 X 20W max GU5.3 12V 8 Black CB<br />
GU10 120V 60Hz 4 White CW<br />
Silver CS<br />
LS6050<br />
Mounting Plate<br />
4in J-Box
LS511A-1 Alura / LS521A-1 Eterna<br />
Refer to Symbol Index on page 2 for explanation<br />
Wallmount<br />
IP56<br />
85<br />
The LS511A-1 and LS521A-1 are machined finish luminaires providing a distinctive<br />
appearance which is complementary to modern architectural designs. Both<br />
luminaires are constructed from 316 marine grade stainless steel with <strong>Lumascape</strong>’s<br />
proprietary ElectroPolishPlus process to give a long life to the surface finish, even<br />
in coastal environments.<br />
Specifications<br />
Lamp source<br />
LS511A-1<br />
35W max<br />
MR16 IRC (GU5.3)<br />
Lamp source<br />
LS521A-1<br />
UL classification<br />
2 x 20W max MR16 IRC (GU5.3)<br />
Suitable for wet locations<br />
LS511A-1 Alura<br />
IP rating<br />
Construction<br />
Installation types<br />
Standard inclusions<br />
IP56<br />
316 marine grade stainless steel<br />
Wall mount<br />
Internal glare control louver<br />
Slide & lock mounting mechanism<br />
0.9in ( 24mm )<br />
Ø 2.3in ( 59mm )<br />
LS521A-1 Eterna<br />
Ambient operating<br />
temperature<br />
-4°F to 122°F (-20°C to +50°C)<br />
3.4in (87mm)<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Accessories<br />
Order separately<br />
Photometrics<br />
LLLS Linear spreader lens<br />
LS696 Mounting plate for 4in J-Box<br />
LS697 Mounting plate for 2in x 3in<br />
single gang switch box<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
<br />
<br />
<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
2.8in ( 73mm)<br />
4in (102mm)<br />
4in (102mm)<br />
4.6in (118mm)<br />
<br />
2.5in (65mm)<br />
7.6in ( 193mm )<br />
LS511A-1<br />
LS511A-1<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code<br />
Alura MR16 35W IRC max GU5.3 12V LS511A-1<br />
LS696 Mounting Plate<br />
4in J-Box<br />
0.125in (3mm) stainless steel<br />
LS697 Mounting Plate<br />
2in x 3in single gang switch box<br />
supplied standard<br />
0.125in (3mm) stainless steel<br />
LS521A-1<br />
LS521A-1<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code<br />
Eterna MR16 2 X 20W IRC max GU5.3 12V LS521A-1
86 LS731LED Portico / LS741LED Piazza<br />
City Range<br />
Refer to Symbol Index on page 2 for explanation<br />
IP65<br />
The LS731LED and LS741LED are compact, fixed position LED spotlights used<br />
for grazing walls whilst providing light at ground level. These luminaires are<br />
constructed from 316 marine grade stainless steel with <strong>Lumascape</strong>’s proprietary<br />
ElectroPolishPlus process to give a long life to the surface finish, even in coastal<br />
environments. They are ideal for use in modern architectural designs.<br />
Specifications<br />
Lamp source<br />
LS731LED<br />
3W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
LS731LED Portico<br />
LS741LED Piazza<br />
Lamp source<br />
LS741LED<br />
UL classification<br />
IP rating<br />
Construction<br />
2 x 3W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
Suitable for wet locations<br />
IP65<br />
316 marine grade stainless steel<br />
1.1in (28mm)<br />
Ø 3.1in (79mm)<br />
Ø 2.3in (59mm)<br />
3.9in (100mm)<br />
1.1in (38mm)<br />
Ø 3.1in (79mm)<br />
Ø 2.3in (59mm)<br />
7.4in (188mm)<br />
Installation type<br />
Wall mount<br />
Ambient operating<br />
temperature<br />
-4°F to 122°F (-20°C to +50°C)<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Accessory<br />
LS6075 J-box mounting plate<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
HumanTouchcompliant<br />
Ø 4.9in (124mm)<br />
LS6075<br />
J-Box Mounting Plate<br />
LS731LED<br />
LS731LED<br />
13<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code<br />
Portico LED LS731LED LED 3W White (5 300K typ.) 3W3 Narrow 8˚ N<br />
Warm white (3 300K typ.) 3H3 Medium 28˚ M<br />
Blue (470nm) 3B2 Flood 46˚ F<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
VOLTAGE<br />
12V 60Hz Wire wound transformer<br />
12-24V DC Ripple free regulated supply<br />
Code<br />
13<br />
LS741LED<br />
LS741LED<br />
13<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code<br />
Piazza LED LS741LED LED 2 x 3W White (5 300K typ.) 6W3 Narrow 8˚ N<br />
Warm white (3 300K typ.) 6H3 Medium 28˚ M<br />
Blue (470nm) 6B2 Flood 46˚ F<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
VOLTAGE<br />
12V 60Hz Wire wound transformer<br />
12-24V DC Ripple free regulated supply<br />
Code<br />
13
LS751LED Villa<br />
Refer to Symbol Index on page 2 for explanation<br />
City Range<br />
IP65<br />
87<br />
The LS751LED is a compact, adjustable LED spotlight. The luminaire is<br />
constructed from 316 marine grade stainless steel with <strong>Lumascape</strong>’s proprietary<br />
ElectroPolishPlus process to give a long life to the surface finish, even in coastal<br />
environments. This luminaire is ideal for use in modern architectural designs.<br />
Specifications<br />
Lamp source 3W LED (LUXEON K2)<br />
• White (5 300K typical)<br />
• Warm white (3 300K typical)<br />
• Blue (470nm)<br />
Other colors by request<br />
For appropriate transformer sizing refer to page 104<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP65<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Wall mount<br />
Ambient operating -4°F to 122°F (-20°C to +50°C)<br />
temperature<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Accessory<br />
LS6075 J-box mounting plate<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
HumanTouchcompliant<br />
1.1in (28mm)<br />
1.8in (45mm)<br />
Ø 3.1in (79mm)<br />
LS751LED Villa<br />
3.9in (100mm)<br />
Ø 2.3in (59mm)<br />
Ø 4.9in (124mm)<br />
LS6075<br />
J-Box Mounting Plate<br />
LS751LED<br />
LS751LED<br />
13<br />
PRODUCT Code LAMP WATTAGE COLOR Code BEAM Code<br />
Villa LED LS751LED LED 3W White (5 300K typ.) 3W3 Narrow 8˚ N<br />
Warm white (3 300K typ.) 3H3 Medium 28˚ M<br />
Blue (470nm) 3B2 Flood 46˚ F<br />
LUXEON K2 LED used<br />
For appropriate transformer sizing refer to page 104<br />
VOLTAGE<br />
12V 60Hz Wire wound transformer<br />
12-24V DC Ripple free regulated supply<br />
Code<br />
13
88<br />
Machining stainless steel disrupts the<br />
natural Chromium Oxide (Cr 2<br />
O 3<br />
) layer.<br />
Chromium Oxide gives stainless steel its<br />
superior corrosion resistance.<br />
After machining, some carbide deposits<br />
and other impurities are left over.<br />
Pickling - This process cleans the surface<br />
of all impurities.<br />
Polishing - This process smooths the<br />
surface, so chlorides and other active<br />
particles cannot become lodged on the<br />
surface.<br />
Passivation - This is the final stage in the<br />
process. Passivation reforms a layer of<br />
Cr 2<br />
O 3<br />
of even thickness over the surface,<br />
for maximum corrosion resistance.
89<br />
bollard & pathway
90 LS482 Balitza<br />
Bollard & Pathway<br />
Refer to Symbol Index on page 2 for explanation<br />
IP66<br />
The LS482 is a luminaire constructed from 316 marine grade stainless steel with<br />
<strong>Lumascape</strong>’s proprietary ElectroPolishPlus process to give a long life to the<br />
surface finish providing excellent corrosion resistance in harsh environments such<br />
as coastal locations. The LS482 is versatile in both function and appearance, having<br />
various configurations in height, head type, mounting method and lamp type.<br />
Specifications<br />
Lamp source 13W CFL / TC-TEL (GX24-q1)<br />
18W CFL / TC-TEL (GX24-q2)<br />
26W CFL / TC-TEL (GX24-q3)<br />
50W max HAL Bi-pin / QT12 (G6.35)<br />
60W A19 Type (E26 Medium) 120V only<br />
23W CFL / SB (E26 Medium) 120V only<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation types<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Photometrics<br />
Surface temperature<br />
Suitable for wet locations<br />
IP66<br />
316 marine grade stainless steel<br />
Surface mount plate<br />
Discreet mount<br />
Thermal cutout<br />
-4°F to 122°F (-20°C to +50°C)<br />
10 year structural, 1 year electrical<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant ≤149°F (≤65°C)<br />
13W - 26W CFL / TC-TEL<br />
50W max HAL Bi-pin / QT12<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS482 Balitza<br />
LS482<br />
LAMP WATTAGE BASE Code HEAD Code MOUNTING HEIGHT Code CONTROL GEAR ENTRY Code<br />
CFL / TC-TEL 4 pin ECG* 13W GX24-q1 267 Apex H Surface mount plate 23.6in (600mm) A2 Integral Bottom Q<br />
CFL / TC-TEL 4 pin ECG* 18W GX24-q2 266 Armored apex B Surface mount plate 35.4in (900mm) A3 Remote Bottom R<br />
CFL / TC-TEL 4 pin ECG* 26W GX24-q3 262 Level F Discreet mount 23.6in (600mm) C1<br />
HAL Bi-pin / QT12 12V 50W (max) G6.35 293 Armored level<br />
A19 Type 120V only 60W E26 med. 291<br />
CFL / SB 120V only 23W (max) E26 med. 291<br />
* ECG - Electronic Control Gear<br />
VOLTAGE Code<br />
120V 60Hz 4<br />
277V 60Hz<br />
Not suitable<br />
for SB or A19 9<br />
or Halogen line<br />
voltage
LS482 Balitza<br />
Bollard & Pathway<br />
91<br />
Head Types<br />
Ø 4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
7.6in ( 193mm )<br />
7.6in (193mm)<br />
6.7in (171 mm )<br />
6.7in (171mm)<br />
Ø 3.4in ( 90mm)<br />
Ø 3.4in ( 90mm)<br />
Ø 3.4in ( 90mm)<br />
Ø 3.4in ( 90mm)<br />
Apex<br />
Code H<br />
Armored Apex<br />
Code B<br />
Level<br />
Code F<br />
Armored Level<br />
Code<br />
Installation Types<br />
Surface Mount Plate<br />
Mounting fasteners not<br />
supplied by <strong>Lumascape</strong><br />
Discreet Mount<br />
Mounting fasteners not<br />
supplied by <strong>Lumascape</strong><br />
<br />
<br />
<br />
<br />
23.6in ( 600mm )<br />
Code A2 Code A3 Code C1<br />
Not available in 35.4in<br />
(900mm) configuration
92 LS582 Balitza Mini<br />
Bollard & Pathway<br />
Refer to Symbol Index on page 2 for explanation<br />
IP66<br />
The LS582 is a surface mount version of the Balitza series. It is constructed from<br />
316 marine grade stainless steel with <strong>Lumascape</strong>’s proprietary ElectroPolishPlus<br />
process. It shares the same appearance as LS482, allowing a theme to be carried<br />
through a site. The diffusion of light from this luminaire provides illuminance at<br />
ground level, as well as acting as a guide beacon.<br />
Specifications<br />
Lamp source 50W max HAL Bi-pin / QT12 (G6.35)<br />
60W max HAL T4 (G9)<br />
60W A19 Type (E26 Medium)<br />
23W CFL / SB (E26 Medium)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP66<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Surface mount<br />
Ambient operating -4°F to 122°F (-20°C to +50°C)<br />
temperature<br />
Warranty<br />
10 year structural,1 year electrical<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Surface temperature<br />
HumanTouchcompliant ≤149°F (≤65°C)<br />
20W max HAL Bi-pin / QT12<br />
15W max CFL / SB<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS582 Balitza Mini<br />
Ø<br />
4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
Ø 4.3in ( 108mm)<br />
7.6in ( 193mm )<br />
7.6in (193mm)<br />
6.7in ( 171mm )<br />
6.7in (171mm)<br />
Apex<br />
Code H<br />
Armored Apex<br />
Code B<br />
Level<br />
Code F<br />
Armored Level<br />
Code<br />
LS582<br />
LAMP WATTAGE BASE VOLTAGE Code HEAD Code<br />
HAL Bi-pin / QT12 50W max G6.35 12V 293 Apex H<br />
HAL T4 60W max G9 120V 60Hz 294 Armored apex B<br />
A19 Type 60W E26 med. 120V 60Hz 291 Level F<br />
CFL / SB 23W max E26 med. 120V 60Hz 291 Armored level
LS592 Balitza Micro<br />
Refer to Symbol Index on page 2 for explanation<br />
Bollard & Pathway<br />
IP66<br />
93<br />
The LS592 is the smallest version of the Balitza series. It is constructed from 316<br />
marine grade stainless steel with <strong>Lumascape</strong>’s proprietary ElectroPolishPlus<br />
process to give a long life to the surface finish providing excellent corrosion resistance<br />
in harsh environments such as coastal locations. It is a compact accent luminaire,<br />
utilizing a low voltage halogen lamp to create low level lighting effects.<br />
Specifications<br />
Lamp source 20W max HAL Bi-pin / QT12 (G4)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP66<br />
Construction<br />
316 marine grade stainless steel<br />
Installation type Surface mount<br />
Ambient operating -4°F to 122°F (-20°C to +50°C)<br />
temperature<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS592 Balitza Micro<br />
3.3in ( 85mm )<br />
Ø 4.3in ( 108mm)<br />
2.4in ( 62mm )<br />
Ø 4.3in ( 108mm)<br />
Apex<br />
Code H<br />
Level<br />
Code F<br />
LS592 293<br />
LAMP WATTAGE BASE VOLTAGE Code Head Code<br />
HAL Bi-pin / QT12 20W max G4 12V 293 Apex H<br />
Level F
94<br />
landscape
LS112A Boronia / LS132A Melaleuca<br />
Landscape<br />
95<br />
IP54<br />
The LS112A and LS132A are popular low voltage spike mount luminaires for<br />
landscape lighting applications. They are constructed of copper or powdercoated<br />
aluminum. The proprietary heat shield is unique to <strong>Lumascape</strong> and draws heat away<br />
from the lamp, extending the lamp life.<br />
Specifications<br />
Lamp source 35W max MR16 IRC (GU5.3)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP54<br />
Construction<br />
Copper and brass<br />
Powdercoated aluminum<br />
Installation type Spike mount<br />
Standard inclusion Internal glare control louver<br />
Ambient operating 14°F to 104°F (-10°C to +40°C)<br />
temperature<br />
Warranty<br />
10 year structural copper<br />
2 year structural aluminum<br />
1 year electrical<br />
Accessories<br />
Refer to page 100<br />
Order separately<br />
Photometrics<br />
LS624 Glare shield<br />
LS617 Frosted lens<br />
LLLS Linear spreader lens<br />
A030X Surface mount plate<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS112A Boronia<br />
5.4in (136mm)<br />
4.1in (104mm)<br />
Ø 2.2in<br />
(56mm)<br />
Ø 2.1in<br />
(54mm)<br />
7.0in (178mm)<br />
8.1in (207mm)<br />
132A Melaleuca<br />
7.0in (178mm)<br />
Ø 2.1in<br />
(54mm)<br />
Ø 2.2in<br />
(56mm)<br />
7.0in (178mm)<br />
8.1in (207mm)<br />
LS112A<br />
LS112A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Boronia MR16 35W IRC max GU5.3 12V LS112A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS<br />
LS112A Boronia<br />
Powdercoated black<br />
LS132A<br />
LS132A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Melaleuca MR16 35W IRC max GU5.3 12V LS132A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS
96 LS162 Waratah / LS172 Poinsettia<br />
Landscape<br />
IP54<br />
The LS162 and LS172 are low voltage path lighters ideal for residential and resort<br />
applications. The copper develops a patina over time to complement the look and<br />
feel of the architecture. Available in two sizes, the underside is finished in a gloss<br />
white for best possible light spread. The lamp is protected from the elements by a<br />
glass chamber.<br />
Specifications<br />
Lamp source 20W, 50W HAL Bi-pin (G4 / GY6,35)<br />
21W max INC T / CON (SBC)<br />
UL classification Suitable for wet locations<br />
LS162 Waratah<br />
LS172 Poinsettia<br />
IP rating<br />
Construction<br />
IP54<br />
Copper<br />
Ø 11.5in (293mm)<br />
Installation type<br />
Spike mount<br />
Ambient operating<br />
temperature<br />
14°F to 104°F (-10°C to +40°C)<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Ø 8.5in (217mm)<br />
Accessories<br />
Refer to page 100<br />
Order separately<br />
Photometrics<br />
Surface temperature<br />
≤149°F (≤65°C)<br />
A030X Surface mount plate<br />
Refer to www.lumascape.com<br />
HumanTouchcompliant models<br />
20W HAL Bi-pin<br />
21W INC T/CON<br />
12.6in (320mm)<br />
pole diameter<br />
Ø 1.7in (42mm)<br />
22.0in (560mm)<br />
pole diameter<br />
Ø 1.7in (42mm)<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
7.0in (178mm)<br />
8.1in (207mm)<br />
7.0in (178mm)<br />
8.1in (207mm)<br />
Ø 2.2in<br />
(56mm)<br />
Ø 2.2in<br />
(56mm)<br />
LS162<br />
LS162<br />
PRODUCT Code LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Waratah LS162 HAL Bi-pin / QT9 20W max G4 12V 1 Copper Polished copper --<br />
HAL Bi-pin / QT12 50W max GY6.35 2 Satin chrome plated CP<br />
T/CON 21W max BA15d / SBC E<br />
LS172<br />
LS172<br />
PRODUCT Code LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Poinsettia LS172 HAL Bi-pin / QT9 20W max G4 12V 1 Copper Polished copper --<br />
HAL Bi-pin / QT12 50W max GY6.35 2 Satin chrome plated CP<br />
T/CON 21W max BA15d / SBC E
LS192 Grevillea<br />
Landscape<br />
97<br />
IP54<br />
The LS192A is a low voltage spike mount luminaire delivering light in a controlled<br />
manner, with a choice of one or two adjustable light heads to direct the light where<br />
needed. It is constructed of copper or powdercoated aluminum. The proprietary heat<br />
shield is unique to <strong>Lumascape</strong> and draws heat away from the lamp, extending the<br />
lamp life. This model is ideal for illuminating low level plantings or objects of interest<br />
in a landscape.<br />
Specifications<br />
Lamp source<br />
LS192-1A<br />
Lamp source<br />
LS192-2A<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Refer to page 100<br />
Order separately<br />
Photometrics<br />
35W max<br />
MR16 IRC (GU5.3)<br />
2 x 35W max MR16 IRC (GU5.3)<br />
Suitable for wet locations<br />
IP54<br />
Copper<br />
Powdercoated aluminum<br />
Spike mount<br />
Internal glare control louver<br />
14°F to 104°F (-10°C to +40°C)<br />
10 year structural copper<br />
2 year structural aluminum<br />
1 year electrical<br />
LS624 Glare shield<br />
LS617 Frosted lens<br />
LLLS Linear spreader lens<br />
LS602 Narrow pole extension kit copper only<br />
A030X Surface mount plate<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS192-1A Grevillea<br />
LS192-2A Double Grevillea<br />
25.5in (684mm)<br />
Ø 2.2in<br />
(56mm)<br />
5.7in (145mm)<br />
2.3in (58mm)<br />
6.6in (167mm)<br />
7.0in (178mm)<br />
8.1in (207mm)<br />
LS192-1A<br />
LS192-1A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Grevillea (single head) MR16 35W IRC max GU 5.3 12V LS192-1A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS<br />
LS192-2A<br />
LS192-2A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Grevillea (double head) MR16 2 x 35W IRC max GU 5.3 12V LS192-2A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS
98 LS201A-3 Hakea / LS121A-2 Cassia<br />
Landscape<br />
IP54<br />
The LS201A-3 and LS121A-2 are compact, fixed position spotlight luminaires used<br />
for grazing walls whilst providing light at ground level. They are constructed of copper<br />
or powdercoated aluminum. The proprietary heat shield is unique to <strong>Lumascape</strong> and<br />
draws heat away from the lamp, extending the lamp life. These luminaires provide a<br />
decorative lighting effect in residential or resort environments.<br />
Specifications<br />
Lamp source<br />
LS201A-3<br />
Lamp source<br />
LS121A-2<br />
UL classification<br />
IP rating<br />
Construction<br />
Installation type<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Refer to page 100<br />
Order separately<br />
Photometrics<br />
20W max<br />
MR16 IRC (GU5.3)<br />
2 x 20W max MR16 IRC (GU5.3)<br />
Suitable for wet locations<br />
IP54<br />
Copper<br />
Powdercoated aluminum<br />
Surface mount<br />
Internal glare control louver<br />
14°F to 104°F (-10°C to +40°C)<br />
10 year structural copper<br />
2 year structural aluminum<br />
1 year electrical<br />
LS680 Tree mounting strap<br />
LS659 Tree mount extension strap<br />
LS624 Glare shield<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
Ø 3.0in (76mm)<br />
LS201A-3 Hakea<br />
1in<br />
(26mm)<br />
Ø 2.2in<br />
(56mm)<br />
4.3in (108mm)<br />
Ø 3.0in (76mm)<br />
LS121A-2 Cassia<br />
1in Ø 2.1in<br />
(26mm) (54mm)<br />
8.5in (215mm)<br />
LS201A-3<br />
LS201A-3<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Hakea MR16 20W IRC max GU5.3 12V LS201A-3 Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS<br />
LS121A-2<br />
LS121A-2<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Cassia MR16 2 x 20W IRC max GU5.3 12V LS121A-2 Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS<br />
LS121A-2 Cassia<br />
Powdercoated black
LS321A Pagoda / LS101A Acacia<br />
Landscape<br />
99<br />
IP54<br />
The LS321A and LS101A are compact, adjustable luminaires for highlighting<br />
decorative elements. They are constructed of copper or powdercoated aluminum.<br />
The proprietary heat shield is unique to <strong>Lumascape</strong> and draws heat away from the<br />
lamp, extending the lamp life.<br />
Specifications<br />
Lamp source 35W max MR16 IRC (GU5.3)<br />
UL classification<br />
Suitable for wet locations<br />
IP rating<br />
IP54<br />
Construction<br />
Copper and brass<br />
Powdercoated aluminum<br />
LS321A Pagoda<br />
LS101A Acacia<br />
Installation type<br />
Surface mount<br />
Standard inclusion<br />
Ambient operating<br />
temperature<br />
Warranty<br />
Accessories<br />
Refer to page 100<br />
Order separately<br />
Internal glare control louver<br />
14°F to 104°F (-10°C to +40°C)<br />
10 year structural copper<br />
2 year structural aluminum<br />
1 year electrical<br />
LS680 Tree mounting strap<br />
LS659 Tree mount extension strap<br />
LS624 Glare shield<br />
LS617 Frosted lens<br />
LLLS Linear spreader lens<br />
LS643 - R / G / B / Y Dichroic color filters<br />
Ø 3.0in (76mm)<br />
7.1in (181mm)<br />
4.1in (104mm)<br />
Ø 2.1in<br />
(54mm)<br />
Ø 3.0in (76mm)<br />
0.6in (15mm)<br />
Ø 2.2in<br />
56mm<br />
4.1in (104mm)<br />
Ø 2.1in<br />
(54mm)<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS321A<br />
LS321A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Pagoda MR16 35W IRC max GU5.3 12V LS321A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS<br />
LS101A<br />
LS101A<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Acacia MR16 35W IRC max GU5.3 12V LS101A Copper Polished copper --<br />
Satin chrome plated CP<br />
Aluminum Black CB<br />
Silver<br />
CS
100 LS294 Firefly<br />
Landscape<br />
IP54<br />
The LS294 is a decorative luminaire made from copper for use in trees or other<br />
suspended applications where some ground light is also desired. The luminaire<br />
sparkles through the sides, whilst casting light through the bottom aperture. It is very<br />
popular in residential or resort applications, where low ambient light levels allow it<br />
to perform at its best.<br />
Specifications<br />
Lamp source 20W max MR11 (SBC)<br />
21W max INC T / CON (SBC)<br />
UL classification Suitable for wet locations<br />
IP rating<br />
IP54<br />
Construction<br />
Copper<br />
Installation type Suspension<br />
Ambient operating 14°F to 104°F (-10°C to +40°C)<br />
temperature<br />
Warranty<br />
10 year structural, 1 year electrical<br />
Photometrics<br />
Refer to www.lumascape.com<br />
Any luminaire can become hot - take care with appropriate use and placement<br />
LS294 Firefly<br />
Ø 2.1in<br />
(54mm)<br />
9.3in (235mm)<br />
PRODUCT LAMP WATTAGE BASE VOLTAGE Code MATERIAL FINISH Code<br />
Firefly MR11 20W max BA15d / SBC 12V LS294A Copper Polished copper --<br />
T/CON 21W max LS294E Satin chrome plated CP<br />
Ø 1.6in<br />
(41mm)<br />
Landscape Accessories<br />
2.6in (66mm)<br />
11.8in (300mm)<br />
Ø 2.1in<br />
(54mm)<br />
LS624 Glare shield<br />
Ø 2.2in<br />
(56mm)<br />
1.2in (30mm)<br />
LS680 Tree mounting strap<br />
Max circumference 39in (1m)<br />
Can be extended with<br />
LS659 Extension strap<br />
Circumference 39in (1m) each<br />
Ø 1.0in (25mm)<br />
LS602 Narrow pole extension<br />
Available in copper only<br />
A030X Surface mount plate<br />
Filters and Lenses<br />
LS643 - R / G / B / Y<br />
Dichroic color filters
Corporate Profile<br />
101<br />
About <strong>Lumascape</strong><br />
<strong>Lumascape</strong> <strong>USA</strong>, located in San Carlos, CA, services the North American<br />
market with locally assembled products sold through more than 50 specialist<br />
manufacturers’ representatives.<br />
The parent company, <strong>Lumascape</strong> Lighting Industries is Australia’s leading<br />
niche manufacturer of high performance and high quality exterior architectural,<br />
landscape and underwater lighting products.<br />
From modest beginnings in 1991, the company now exports to more than 40<br />
countries around the world.<br />
Our Commitment<br />
We are committed to delivering outstanding value for our customers,<br />
maintaining a leadership position in our chosen markets through an ongoing<br />
focus on customer needs and expectations. Ongoing training and providing<br />
a safe and learning workplace for our employees ensures that <strong>Lumascape</strong><br />
will maintain its leadership position in the market place.<br />
Our Contribution to the Environment<br />
We take our environmental responsibilities seriously. <strong>Lumascape</strong>’s products<br />
and manufacturing processes are designed around the principles of energy<br />
efficiency, recyclability and the elimination of waste in all its forms.<br />
We continue to develop an Environmental Management System that ensures<br />
the company’s current and future products and methods of doing business<br />
meet all legislated community requirements and expectations.<br />
Products<br />
All of <strong>Lumascape</strong>’s lighting products are designed, developed and<br />
manufactured to suit the specific environmental and regulatory requirements<br />
in the <strong>USA</strong> and other countries in which they are sold and installed.<br />
The company is a leader in the development of LED lighting systems and<br />
luminaires utilizing metal halide lamps, assembled in high ingress protection<br />
enclosures.<br />
Innovation<br />
<strong>Lumascape</strong> invests a significant amount of its revenue each year into the<br />
research and development of new and innovative lighting technologies and<br />
luminaires. The company has been a recipient of a number of government<br />
awards in recent years targeting among other things the development of<br />
thermal management techniques vital to the successful performance and<br />
durability of LED lighting.<br />
Design Philosophy<br />
Our products are designed around four basic tenets: Anticipation of customer<br />
need, reliability, durability and the application of advanced yet proven<br />
technology.<br />
New designs are comprehensively tested and accredited by certified<br />
laboratories prior to launch, while all production processes are validated<br />
through end-of-line functional testing. In the case of LED luminaires, extended<br />
“burn-in” testing is carried out prior to shipment.<br />
<strong>Lumascape</strong> reserves the right to alter any product specifications at any time
102<br />
technical data
Ingress Protection (IP) & Impact Protection (IK)<br />
Technical Data<br />
103<br />
Ingress Protection (IP) Rating<br />
The IP system is an internationally recognized method to indicate the degree of protection against the ingress of dust, solid objects and moisture<br />
into an enclosure. The letters “IP” are followed by two numerals.<br />
First Numeral<br />
Protection of persons against contact with or approach to live parts and against contact with moving parts (other than smooth rotating shafts and the<br />
like) inside the enclosure and protection of the equipment against ingress of solid foreign bodies in accordance with IEC 60598-1:2003.<br />
Numeral Degree of Protection<br />
0 Not protected.<br />
1 Protected against solid objects 50mm in diameter or greater.<br />
A large surface of the body, such as a hand (no protection against deliberate access).<br />
2 Protected against solid objects 12mm in diameter or greater.<br />
Fingers or similar objects not exceeding 80mm in length.<br />
3 Protected against solid objects 2.5mm in diameter or greater.<br />
Tools, wires, etc., of diameter or thickness greater than 2.5mm.<br />
4 Protected against solid objects 1mm in diameter or greater.<br />
Wires or other similar solid material of thickness greater than 1mm in diameter.<br />
5 Dust protected.<br />
Dust does not enter in sufficient quantity to interfere with satisfactory operation of equipment.<br />
6 Dust tight.<br />
No ingress of dust.<br />
Second Numeral<br />
The second numeral indicates the degree of protection against the ingress of moisture as defined in IEC 60598-1:2003.<br />
Numeral Degree of Protection<br />
0 Not protected.<br />
1 Protected against dripping water.<br />
Dripping water (vertically falling drops) shall have no harmful effect.<br />
2 Protected against dripping water when tilted up to 15º.<br />
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15º from its normal position.<br />
3 Protected against spraying water.<br />
Water falling as a spray at any angle up to 60º from the vertical shall have no harmful effect.<br />
4 Protected against splashing water.<br />
Water splashing against the enclosure from any direction shall have no harmful effect.<br />
5 Protected against water jets.<br />
Water projected by a nozzle against enclosure from any direction shall have no harmful effects.<br />
6 Protected against heavy seas.<br />
Water from heavy seas or projected in powerful water jets shall not enter the enclosure in harmful quantities.<br />
7 Protected against the effects of temporary immersion.<br />
Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time.<br />
8 Protected against continuous immersion. The equipment is suitable for continuous submersion in water under conditions which shall be specified by the<br />
manufacturer.<br />
Impact Protection (IK) Rating<br />
Degree of protection provided by enclosures for electrical equipment against external impacts in accordance with IEC 62262:2002.<br />
IK Code<br />
IK00<br />
IK01<br />
IK02<br />
IK03<br />
IK04<br />
IK05<br />
IK06<br />
IK07<br />
IK08<br />
IK09<br />
IK10<br />
Degree of Protection<br />
Not protected.<br />
Protected against 0.14 joules impact. Equivalent to impact of 0.25kg mass dropped from 56mm above impacted surface.<br />
Protected against 0.2 joules impact. Equivalent to impact of 0.25kg mass dropped from 80mm above impacted surface.<br />
Protected against 0.35 joules impact. Equivalent to impact of 0.25kg mass dropped from 140mm above impacted surface.<br />
Protected against 0.5 joules impact. Equivalent to impact of 0.25kg mass dropped from 200mm above impacted surface.<br />
Protected against 0.7 joules impact. Equivalent to impact of 0.25kg mass dropped from 280mm above impacted surface.<br />
Protected against 1 joules impact. Equivalent to impact of 0.25kg mass dropped from 400mm above impacted surface.<br />
Protected against 2 joules impact. Equivalent to impact of 0.5kg mass dropped from 400mm above impacted surface.<br />
Protected against 5 joules impact. Equivalent to impact of 1.7kg mass dropped from 300mm above impacted surface.<br />
Protected against 10 joules impact. Equivalent to impact of 5kg mass dropped from 200mm above impacted surface.<br />
Protected against 20 joules impact. Equivalent to impact of 5kg mass dropped from 400mm above impacted surface.
104<br />
Transformer Sizing for LED Luminaires<br />
Code<br />
Luminaire<br />
Lamp Source<br />
12V AC<br />
Magnetic<br />
Transformer<br />
Shipping Weights & Carton Dimensions<br />
Load<br />
24V DC Ripple<br />
Free Supply<br />
Number of luminaires that can be attached to transformer<br />
12V AC Magnetic Transformer<br />
24V DC Ripple Free Supply<br />
Wattage<br />
Wattage<br />
50VA 100VA 200VA 300VA 400VA 500VA 20W 75W<br />
CODE<br />
CODE<br />
LS50TX LS100TX LS200TX LS300TX LS400TX LS500TX LSLED-24V20W LSLED-24V75W<br />
LS265LED 36W 60W 45.6W 0 1 3 5 6 8 0 0<br />
LS275LED 3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
8W 12.5W 7.6W 3 6 12 18 24 30 1 5<br />
LS333ANS-LED 3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
8W 12.5W 7.6W 3 6 12 18 24 30 1 5<br />
LS371LED 2W 4.3W 2.5W 10 20 40 60 80 100 6 24<br />
LS393LED 8W 12.5W 7.6W 3 6 12 18 24 30 1 5<br />
LS454LED 3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
LS553LED 1W 2.2W 1.4W 16 32 64 96 128 160 9 36<br />
LS563LED 1W 2.2W 1.4W 16 32 64 96 128 160 9 36<br />
3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
LS731LED 3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
LS741LED 2 x 3W 10.4W 7.4W 4 9 19 28 38 48 2 7<br />
LS751LED 3W 5.2W 3.7W 9 19 38 57 76 96 4 14<br />
LS793LED 8W 12.5W 7.6W 3 6 12 18 24 30 1 5<br />
LS853LED 20W 60W 45.6W 0 1 3 5 6 8 0 0<br />
Luminaire Code Weight Width Length Height Page<br />
lb kg in mm in mm in mm<br />
LS101A 1.1 0.5 3.5 90 6.7 170 3.7 95 99<br />
LS112A 1.8 0.8 4.7 120 8.9 225 3.3 85 95<br />
LS132A 1.7 0.8 4.7 120 8.9 225 3.3 85 95<br />
LS162 4.4 2 10.2 260 9.4 240 5.9 150 96<br />
LS172 5.7 2.6 12.6 320 18.9 480 5.9 150 96<br />
LS192-1A 2.6 1.2 7.1 180 31.5 800 7.1 180 97<br />
LS192-2A 3.1 1.4 7.1 180 31.5 800 7.1 180 97<br />
LS201A-3 0.1 0.5 3.5 90 6.7 170 3.9 100 98<br />
LS265A-1 13.2 6 11 280 11 280 11.8 300 72<br />
LS265A-1G 6.6 3 11 280 11 280 11.8 300 72<br />
LS265A-3 11 5 11 280 11 280 11.8 300 72<br />
LS265LED 6.6 3 11 280 11 280 11.8 300 71<br />
LS275A-2 2.2 1 7.1 180 7.1 180 7.9 200 70<br />
LS275LED 2.2 1 7.1 180 7.1 180 7.9 200 70<br />
LS294 0.8 0.4 9.8 250 7.5 190 7.5 190 100<br />
LS321A 1.1 0.5 4.7 120 8.9 225 3.1 80 99<br />
LS333A 2.0 0.9 7.1 180 7.1 180 7.9 200 47<br />
LS333AN-1 4.4 2 7.1 180 7.1 180 7.9 200 47<br />
LS333ANS-2 2.9 1.3 7.1 180 7.1 180 7.9 200 69<br />
LS333ANS-LED 3.2 1.5 7.1 180 7.1 180 7.9 200 69<br />
LS341 17.6 8 11 280 11 280 18.5 470 64<br />
LS343 17.6 8 11 280 11 280 18.5 470 9<br />
LS345 17.6 8 11 280 11 280 18.5 470 74<br />
LS361 12.1 5.5 8.7 220 8.7 220 15 380 66<br />
LS363 12.1 5.5 8.7 220 8.7 220 15 380 31<br />
LS365 12.1 5.5 8.7 220 8.7 220 15 380 76<br />
LS371A 2.8 1.3 5.5 140 5.7 145 3.1 80 82<br />
LS371LED 3.3 1.5 7.1 180 7.1 180 7.9 200 82<br />
LS381A 1.5 0.7 4.9 125 4.9 125 5.5 140 83<br />
LS393 4.4 2 7.5 190 7.5 190 11.8 300 39<br />
LS393LED 4.4 2 7.5 190 7.5 190 11.8 300 39<br />
LS411 3.3 1.5 7.5 190 7.5 190 11.8 300 62<br />
LS411LED 3.3 1.5 7.5 190 7.5 190 11.8 300 62<br />
Luminaire Code Weight Width Length Height Page<br />
lb kg in mm in mm in mm<br />
LS421 5.9 2.7 7.5 190 7.5 190 11.8 300 58<br />
LS421LED 5.9 2.7 7.5 190 7.5 190 11.8 300 58<br />
LS422 7.9 3.6 7.5 190 7.5 190 15.4 390 57<br />
LS422LED 7.9 3.6 7.5 190 7.5 190 15.4 390 57<br />
LS431 6.6 3 7.5 190 7.5 190 15.4 390 59<br />
LS431LED 7.7 3.5 7.5 190 7.5 190 15.4 390 59<br />
LS432 7.4 3.4 7.5 190 7.5 190 15.4 390 57<br />
LS432LED 7.7 3.5 7.5 190 7.5 190 15.4 390 57<br />
LS441 1.7 0.8 3.1 80 10.6 270 4.3 110 84<br />
LS452 6.8 3.1 7.5 190 7.5 190 15.4 390 56<br />
LS452LED 6.8 3.1 7.5 190 7.5 190 15.4 390 56<br />
LS454 1.2 0.6 4.3 110 4.7 120 3.5 90 79<br />
LS454LED 1.4 0.7 7.1 180 7.1 180 7.9 200 79<br />
LS461 5.8 2.7 7.5 190 7.5 190 15.4 390 60<br />
LS471 6.6 3 7.5 190 7.5 190 15.4 390 81<br />
LS471LED 7.7 3.5 7.5 190 7.5 190 15.4 390 81<br />
LS475A 1.8 0.8 4.7 120 4.7 230 3.3 85 73<br />
LS482-B3 11 5 7.1 180 43.3 1100 7.1 180 90<br />
LS482-C1 5.5 2.5 7.1 180 25.6 650 7.1 180 90<br />
LS491 2.6 1.2 4.7 120 8.9 225 3.3 85 84<br />
LS511A-1 1.8 0.8 3.5 90 6.7 170 3.9 100 85<br />
LS521A-1 2.4 1.1 4.7 120 8.9 225 3.3 85 85<br />
LS553LED 3.9 1.8 7.5 190 7.5 190 11.8 300 52<br />
LS563LED 3.1 1.4 7.5 190 7.5 190 11.8 300 50<br />
LS582 3.3 1.5 7.1 180 7.1 180 7.9 200 92<br />
LS592 2.2 1 7.1 180 7.1 180 7.9 200 93<br />
LS731LED 3.9 1.8 7.1 180 7.1 180 7.9 200 86<br />
LS741LED 4.2 1.9 4.7 120 8.9 225 3.3 85 86<br />
LS751LED 2.1 1 7.1 180 7.1 180 7.9 200 87<br />
LS793LED 3.5 1.6 7.1 180 7.1 180 7.9 200 54<br />
LS843 14.3 6.5 11 280 11 280 11.8 300 25<br />
LS853 14.3 6.5 11 280 11 280 11.8 300 17<br />
LS853LED 14.3 6.5 11 280 11 280 11.8 300 17
For full details of our extensive range of products visit<br />
www.lumascape.com
LUMASCAPE <strong>USA</strong> INC. HEAD OFFICE<br />
1300 Industrial Road, Unit #19<br />
San Carlos, CA 94070<br />
Tel: 1-(650)-595-LUMA(5862)<br />
Fax: 1-(650)-595-5820<br />
info@lumascape.com<br />
FREE CALL<br />
1-866-695-LUMA(5862)<br />
US & Canada<br />
Your local <strong>Lumascape</strong> agent is:<br />
www.lumascape.com<br />
<strong>Lumascape</strong> <strong>USA</strong> Inc.<br />
LSPROM 127