DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

More documents

Recommendations

Info

1. Safety Precautions 4 Do not use inflammable gas or solvent inside unit. It could cause fire or combustion. Warning/Caution label location Do not use inflammable gas or solvent inside unit. It could cause fire or combustion.
2. Usage Precautions 2-1. Power Supply Make sure the power supply used is always within the following range. 120V AC 50Hz Plug the power cord plug directly into a wall power outlet. This equipment shall be installed near the socket-outlet where the plug on the power supply cord is easily accessible. 2-2. Operating Environment Operate this unit in the following environment. • Temperature range: 5 to 35 °C (41 to 95°F) • Humidity range: 20 to 85% RH (no condensation) • Avoid exposure to direct sunlight. • Avoid dusty locations • Avoid locations with vibration • Avoid locations that are salty • Avoid locations with special chemicals Store this unit in the following environment. 2-3. Storage Conditions • Temperature range: -5 to +50 °C (23 to 122°F) • Humidity range: 10 to 90% RH (no condensation) • Avoid exposure to direct sunlight. • Avoid dusty locations • Avoid locations with vibration • Avoid locations that are salty • Avoid locations with special chemicals 2-4. Maintenance To maintain the performance of this unit, you should never apply oil or grease to parts (unless specified in this instruction manual to do so). Please contact your dealer if a problem is suspected. 5
Page 1 and 2: System 4000 DYNAMIC BOOKLET MAKER D
Page 3 and 4: INTRODUCTION Thank you for purchasi
Page 5: CAUTIONS: Do not use flammable spra
Page 9 and 10: 1 Entrance Section 3-2. Internal Pa
Page 11 and 12: 3 Folding Section ep 3. Names and F
Page 13 and 14: Control Panel 2 1 Lamps/Displays 1
Page 15 and 16: Operation Keys Display Function bmS
Page 17 and 18: No. Name Function 1 2 3 4 5 6 7 8 9
Page 19 and 20: 4. Insert the wire from the 2 Upper
Page 21 and 22: 1. Rotate the 8 triangular knob to
Page 23 and 24: 5. Stitching Range Stitching Positi
Page 25 and 26: 6. Stitching Normal Size Paper Do n
Page 27 and 28: 6.Stitching Normal Size Paper 5. Ad
Page 29 and 30: 6-1-4 Points to remember when paper
Page 31 and 32: 6. Stitching Normal Size Paper 6-2.
Page 33 and 34: 4) • The unit selected at 3) will
Page 35 and 36: 6-6. After Starting To finely adjus
Page 37 and 38: 7. Memorizing • The bs Memory Inp
Page 39 and 40: 5) • Press bl Select Fold Key and
Page 41 and 42: 10) • Input the length [S] from t
Page 43 and 44: • To change the input, input the
Page 45 and 46: 8) • Using the 7 Numerical Keys,
Page 47 and 48: When Corner-Stitching at Right Side
Page 49 and 50: 8-4. No-Stitching No-Folding Use th
Page 51 and 52: 2 Attaching Conditions A m ? Attach
Page 53 and 54: If the paper skews immediately afte
Page 55 and 56: 5 Loosen the knob screw at (D), and
Page 57 and 58:
9-8. Using the Guides After Folding
Page 59 and 60:
3 Adjusting the press rollers 3 lev
Page 61 and 62:
10. Using Function Keys Operating t
Page 63 and 64:
• Pressing 7 of the 7 Numerical K
Page 65 and 66:
12. LCD Error Messages and Correspo
Page 67 and 68:
• Display when the paper jam has
Page 69 and 70:
13. The Unit will Stop in These Cas
Page 71 and 72:
15. Maintenance of the Stitching He
Page 73 and 74:
This page is a blank page.
Page 75 and 76:
This page is a blank page.
show all

DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?