580nm Laser Diode - Electro Optical Components, Inc.

Electro Optical Components, Inc.
5460 Skylane Boulevard, Santa Rosa, CA 95403
Toll Free: 855-EOC-6300
www.eoc-inc.com | info@eoc-inc.com
YELLOW 580nm & ORANGE 605nm
LASER Vivid like the Sunrise Collor!
Have you ever found a Laser like this? If not,you are lucky now!
ORANGE model: ORO-020 YELLOW model:OYO-010
Laser Power ⇒ 1~40mW
More Power available! on your request.
Compact! Wide Usage!!
Reasonable Price !!!
Unit Size :Widrg112 x Hight44 x Length200mm
Application:
hemoglobin or protein`s mass analization、
Light source for fluorescence microscope and
other medical or chemical applications、 Optics experiment、Beam for Entertainments、
Or for your next research?
You can use it in the outside of under the Sunshiny environment, because Yellow Laser
Beam is easily available to see under the condition where Red Laser Beam is difficult to see.
ORSA was established to support various needs in the world through more than 30 years experiance to handle Laser
from Violet Blue to IR for Optical Communication System's module, Academic use, Laboratory use, and Optical
measurement equipment system. Details of each product will be informed upon your request. Other assembly not
shown here will be available to be upon your Special Request and then your expectations will be satisfied.
O R S A System Architect
Optical Research
web contact ⇒ http://www.orsajp.com to ORSA Corporation
mail contact⇒ welcome@orsajp.com to me

YELLOW & ORANGE Laser
with a Single Mode Fiber
Pure-YELLOW 580nm / Vivid-ORANGE 605nm
model: Yellow OYO-010SF / Orange ORO-010SF
Fiber Output Power
5~8mW or more available
Fiber type
SMC63P (PMF)1.5m
with FC connector
(SC type is also available.)
UNIT Size
W112 × H44 × L280(mm)
A fiber is able to be stored in the unit case with a rolled
form. therefore, you can keep it in safe without your
concern about the fiber's damage while transfering or
hundling.
You can safekeep one like this.
How safe it would be!
Optical Research
O R S A System Architect
-2-

COMBINATION with LASER DRIVE UNIT TOS304
Set with YELLOW LASER UNIT Set with ORANGE LASER UNIT
You can use various type of laser through this Laser
Drive Unit not only these Orange or Yellow Laser.
You can save the cost, then!
You can request TTL Pulse function as an option.
Max Current is 700mA, but we recommend to use this
under 500mA because of warmness.
The function of linkage with Temperature and Laser
Ladiation is alternative by the switch on the rear face.
UNIT SIZE:Width112 x Hight55 x Length250 (mm)
Power Supply:12V 3.8A or 4A AC adapter (center+)
Specifications or details of this drive unit wiil be informed to you opon your
request.
SPECTRUM DATA( by SUMITA OPTICAL GLASS, Inc.,)
ORANGE LASER
YELLOW LASER
Above designs or specifications can be changed with our daily technical improvement. Please feel free to ask our
newest ones.
Optical Research
O R S A System Architect
-3-

Image of the structure
Collimate Lense
Blue Laser
FiberLaser
Laser Beam
Beam Shaper
Yellow575nm
Orange605nm
NA0.23 is the Output Light Angle
By collimator, you can make a parallel beam or focus at a certain point.
Collimate Lens is choiced among f3, f6, f8, f10 f12.
Mainly f3 or f10 lens are more standard than others.
Image of
the structure for Optical Fiber Type
Blue Laser
You can sellect a fiber
Beam Shaper
Fiber Laser
Pheluel
Laser Light
Optical fiber cord
FC connector
or SC or SMA or other standard connector available
from Single mode or Multi mode from the world wide standard type
such as GI-50/125,SI-100/250, SI-200/250.
Orange Laser Stability of 2 hours in an air conditioned room.
Laser Body is temperature controlled.
Note 1:
The laser power stability is very sensitive for the the temperature of the room and the blue LD.
2: At a low power, the stability might not be good as a high power level as of 2012 Spring.
3: A blue laser 445nm LD is used as a stimulating power.
4: Fiber Laser is produced by Sumita Optical Glass, Inc.,
5: Laser module and unit are assembled by ORSA in Japan. ---A Japan Made Product---
Optical Research
O R S A System Architect
-4-

Laser beam Quality
blue cut filter
445nmLD
Because of the reflection from a blue cut filter,
newtonlings or interference stripes appear.
445nmLD
blue cut filter
As set a filter in angle, stripes will disappear.
blue cut filter
445nmLD
longer space
As a beam search a wide plane of a glass, then
dusts or scratches in the glass will be easely found.
445nmLD
The glass edge condition will be also examined by
the expanded laser beam.
This laser might be efficient for glass plates or leses inspection.
no scratch or no dust, clean blue cut filter
eye
or
camera
a glass for inspection
Optical Research
O R S A System Architect
-5-