Technical Manual 2011 - tech mavic
Technical Manual 2011 - tech mavic
Technical Manual 2011 - tech mavic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Technical</strong><br />
<strong>Manual</strong><br />
<strong>2011</strong>
<strong>2011</strong><br />
CONTENTS<br />
03<br />
04>26<br />
04<br />
05<br />
06<br />
07<br />
08<br />
09<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
19<br />
20<br />
21<br />
22<br />
23<br />
24<br />
25<br />
26<br />
27<br />
28<br />
29>34<br />
30>31<br />
32>33<br />
34<br />
35>37<br />
WWW.TECH-MAVIC.COM<br />
MAVIC ® WHEELS<br />
iO TRACK 11<br />
COMÈTE TRACK 11<br />
ELLIPSE 11<br />
COMÈTE ROAD 11<br />
COSMIC CARBONE ULTIMATE 11<br />
COSMIC CARBONE 80<br />
COSMIC CARBONE SLR 11<br />
COSMIC CARBONE SR<br />
COSMIC CARBONE SL 11<br />
COSMIC ELITE 11<br />
R-SYS SLR TUBULAR<br />
R-SYS SLR CLINCHER<br />
KSYRIUM SLR FRONT TUBULAR<br />
KSYRIUM SLR FRONT CLINCHER<br />
KSYRIUM SR<br />
KSYRIUM SL 11<br />
KSYRIUM ELITE 11<br />
KSYRIUM EQUIPE 11<br />
CROSSTRAIL DISC 11<br />
CROSSRIDE DISC 11-15 MM<br />
CROSSRIDE DISC 11 INTL<br />
CROSSRIDE DISC 11 CL<br />
CROSSRIDE UB DISC 11<br />
CROSSRIDE UB 11<br />
IMPORTANT NOTES ABOUT EXALITH ® RIMS<br />
WHEEL MAINTENANCE <strong>2011</strong><br />
WHEEL BUILDING / BEARINGS<br />
HUB / CLEARANCE ADJUSTMENT / NEW CAP<br />
STICKER REPLACEMENT<br />
TOOLS<br />
WWW.TECH-MAVIC.COM<br />
THIS DOCUMENT ONLY COVERS NEW PRODUCTS FOR <strong>2011</strong>.<br />
THIS DOCUMENT UPDATES YOUR TECHNICAL INFORMATION AND SHOULD THEREFORE BE KEPT CAREFULLY WITH THE MANUALS<br />
FROM PREVIOUS YEARS, WITH NO TIME LIMITATION.<br />
ALL INFORMATION ON PRODUCTS ALREADY INCLUDED IN PREVIOUS RANGES CAN BE FOUND IN THE TECHNICAL MANUALS<br />
PUBLISHED SINCE 1997.<br />
PLEASE VISIT THE INTERNET SITE WWW.TECH-MAVIC.COM TO FIND ALL EDITIONS OF THIS MANUAL PUBLISHED SINCE 1997.<br />
2
www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
This website (in English, French, German, Spanish, Italian and Japanese) is at your complete disposal. All information about Mavic products released<br />
since 1997 is available in PDF format and downloadable from this easily accessible and user-friendly site.<br />
Visit: www.<strong>tech</strong>-<strong>mavic</strong>.com where you will find all this information. To connect to this website you will need a user name and password:<br />
User name: <strong>mavic</strong>-com<br />
Password: dealer<br />
Among other things on the website, you will find:<br />
• The <strong>tech</strong>nical details on all Mavic products marketed since 1997 - wheels, rims, components - arranged by discipline and by product.<br />
• 4 recap charts of spoke lengths and references for all our wheels, which will help you to manage your spoke stock.<br />
• A program for calculating spoke length: starting with a Mavic rim, select the drilling, lacing pattern and the width of your hub, as well as the<br />
diameter of the flanges and the distances between the flange and the frame or fork support; the spoke length required to build your wheel will<br />
be calculated automatically.<br />
We hope that this tool will meet your needs. Do not hesitate to point out any malfunctions you identify or improvements that you would like to see.<br />
3
iO Track 11<br />
Use: front wheel only, intended exclusively for track bikes. Any other use (such as<br />
on a road bike, tandem, cyclo-cross bike, or off-road use...) is highly inadvisable, is<br />
the sole responsibility of the user and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
HUB<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
M40131<br />
WHEEL WEIGHT WITHOUT RETAINING SCREWS<br />
Front 750 g<br />
RECOMMENDED TUBULAR WIDTH<br />
Dimensions: Ø 700<br />
633 mm<br />
Tubular only / Recommended width: 18 to 21 mm<br />
M40124<br />
M40130<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Retaining screw M40124<br />
• Wheel bag<br />
• Wheel user guide<br />
WHEEL REFERENCES<br />
Front 111 554 10<br />
Bearing adjustment See <strong>2011</strong> TM, page 31<br />
4
COMÈTE Track 11<br />
Use: rear wheel only, intended exclusively for track bikes. Any other use (such as<br />
on a road bike, tandem, cyclo-cross bike, or off-road use...) is highly inadvisable, is<br />
the sole responsibility of the user and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
HUB<br />
M40129<br />
WHEEL WEIGHT WITHOUT FIXING NUT<br />
Rear 980 g<br />
RECOMMENDED TUBULAR WIDTH<br />
Dimensions: Ø 700<br />
633 mm<br />
Tubular only / Recommended width: 18 to 21 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Solvent products are not to be used in any case.<br />
Do not use a high-pressure washer.<br />
M40772<br />
M40128<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Fixing nuts M40772<br />
• Wheel bag<br />
• Wheel user guide<br />
REPLACING THE FRONT AXLE AND BEARINGS<br />
WHEEL REFERENCES<br />
Rear 111 549 13<br />
1. Using two 15 mm open-end wrenches, unscrew the axle end screws. Only one of the 2 needs to be<br />
unscrewed from the axle in order for it to be extracted from the hub;<br />
2. To remove the 2nd axle end screw, insert a 5 mm Allen wrench inside the axle on the side opposite the<br />
remaining axle end screw, hold the axle end screw with a 15 mm open end wrench and unscrew the<br />
assembly;<br />
3. Remove the bearings, then install the new ones;<br />
4. Repeat procedure 1 above in reverse order.<br />
5
ELLIPSE 11<br />
Use: for track bike use only. Any other use (such as on a road bike, tandem,<br />
cyclo-cross bike, or off-road use...) is highly inadvisable, is the sole responsibility<br />
of the user and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
30,5<br />
RIMS<br />
19,4<br />
HUBS<br />
10<br />
WHEEL BUILDING<br />
323 861 01<br />
M40318<br />
M40242 M40243<br />
M40447<br />
REFERENCES AND<br />
LENGTHS:<br />
Front:<br />
Rear:<br />
M40318<br />
FEATURES:<br />
Black ultra-bladed straight pull spokes with ABS nipples (self-locking)<br />
WHEEL WEIGHT WITHOUT FIXING NUTS<br />
Front<br />
Rear<br />
SALES REFERENCES: Front and Rear: 120 334 15<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Valve extender: 118 952 01<br />
Length: ≥ 55 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
323 862 01<br />
323 886 01<br />
M40448<br />
905 g<br />
990 g<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: 2-cross lacing on both sides<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions:<br />
ETRTO 622 x 15C<br />
Recommended tire width: 19 to 23 mm<br />
323 886 01<br />
120 337 01, length 279 mm (per 10, integrated nipples)<br />
120 338 01, length 296 mm (per 10, integrated nipples)<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Fixing nuts 323 886 01<br />
• Rim tape<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Free play bearing adjustment wrench M40123<br />
• Aerodynamic spoke wrench M40567 (with rear wheel)<br />
• Wheel user guide<br />
Replacing the front and rear axle and bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front<br />
Rear<br />
Pair<br />
112 014 10<br />
112 015 13<br />
112 016 14<br />
TENSION:<br />
Front: 90 to 110 kg<br />
Rear drive side: 90 to 110 kg<br />
See 2005 TM, page 20<br />
See 2005 TM, page 23<br />
See 2005 TM, page 24<br />
See 2005 TM, page 26<br />
6
COMÈTE ROAD 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
HUBS<br />
WHEEL WEIGHT WITHOUT SKEWER AND WITHOUT TUBULAR<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions:<br />
Ø 700: 633 mm<br />
Tubular only / Recommended width: 18 to 23 mm<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels.<br />
The use of other brake pads may be dangerous for the user and may void the warranty.<br />
Please carefully read the «Exalith Warning» provided with your wheels.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
Clean with a dry cloth or soapy water if necessary.<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
996 833 01<br />
M40077<br />
ACCESSORIES WHEEL SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 rear quick-release skewer M40150<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Rim tape<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Yksion PowerLink rear tubular 23c 118 491 01<br />
• 1 pair of Mavic Exalith brake pads for Exalith brake track: HG/Sram/Mavic 120 164 01<br />
or ED 120 165 01<br />
• Wheel user guide<br />
• Tubular user guide<br />
M10<br />
ED11<br />
1165 g<br />
1150 g<br />
995 000 01<br />
M40579<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Important notes about Exalith rims<br />
Bonding a tubular<br />
M40067<br />
WHEEL REFERENCES<br />
Rear M10<br />
Rear ED11<br />
M40592 (M10)<br />
M40591 (ED10)<br />
324 130 01<br />
See 2008 TM, page 23<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tubular user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
111 543 11<br />
111 544 12<br />
7
COSMIC CARBONE ULTIMATE 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 55 mm<br />
996 045 01<br />
996 035 01<br />
M40078<br />
996 033 01<br />
M40063<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TUBULAR<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: Ø 700<br />
633 tubular only<br />
Recommended tubular width: 19 to 23 mm<br />
996 032 01<br />
996 036 01 M40578<br />
M40067<br />
M40592 (M10)<br />
M40591 (ED10)<br />
M40077 995 000 01<br />
996 034 01<br />
WHEEL REFERENCES<br />
Use only the Mavic carbon rim brake pads supplied with the wheels. The brake pads can be ordered separately using references 120 131 01 (HG, Sram,<br />
Mavic) and 120 132 01 (ED).<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer. Do not pull or press on the spokes when handling the<br />
quick-release skewer. Avoid transport using a bike carrier.<br />
Only transport the wheels in the wheel bags supplied. Avoid side shocks to the spokes.<br />
FEATURES:<br />
Unidirectional carbon spokes molded into the rim, conventional nipples on rear<br />
non-drive side only<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 Titanium front quick-release skewer 323 485 01<br />
• BR 601 Titanium rear quick-release skewer 323 486 01<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel bags M40135<br />
• 1 pair of Mavic Carbon brake pads for braking on carbon rim with the rear wheel:<br />
HG/Sram/Mavic 120 131 01 or ED 120 132 01<br />
• 2 pairs of Mavic Carbon brake pads for braking on carbon rim with the front wheel:<br />
HG/Sram/Mavic 120 131 01 and ED 120 132 01<br />
• Free play bearing adjustment wrench M40123<br />
• Yksion GripLink front tubular 23c 119 412 01<br />
• Yksion PowerLink rear tubular 23c 118 491 01<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Wheel user guide<br />
• Tubular user guide<br />
Front<br />
Rear M10<br />
Rear ED11<br />
520 g<br />
680 g<br />
665 g<br />
LACING PATTERN:<br />
Front and rear non-drive side: «diameter» spokes from rim to rim, 2-cross pattern<br />
Rear non-drive side: radial<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a nipple<br />
Bonding a tubular<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
11807610<br />
11841011<br />
11807812<br />
11807914<br />
11841114<br />
See 2005 TM, page 20<br />
See 2008 TM, page 23<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2008 TM, page 32<br />
See Mavic tubular user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
8
COSMIC CARBONE 80<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
80<br />
RIMS<br />
24,8<br />
HUBS<br />
WHEEL BUILDING<br />
M40676<br />
REFERENCES AND<br />
LENGTHS:<br />
M40052<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
FEATURES:<br />
Black stainless steel straight pull spokes with ABS spoke nipples<br />
SALES REFERENCES: Front: 120 109 10<br />
Rear: 120 109 13<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 80 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
M40075<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: Ø 700<br />
633 tubular only<br />
Recommended tubular width: 19 to 23 mm<br />
Use only the Mavic carbon rim brake pads supplied with the wheels. The brake pads can be ordered separately using references 120 131 01 (HG, Sram,<br />
Mavic) and 120 132 01 (ED).<br />
When replacing the rear rim:<br />
1. With the valve hole near you, turn the rim so that the «infobloc» label can be seen.<br />
2. The first spoke to the right of the valve hole is a non-traction spoke and should be inserted in the drive side hub.<br />
M40063<br />
M40578<br />
M40078<br />
323 860 01<br />
M40759<br />
M40578<br />
995 000 01<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: 2-crossed drive side, radial non-drive side<br />
M40067<br />
120 113 01, length 233 mm (per 8, integrated nipples)<br />
120 114 01, length 249 mm (per 10, integrated nipples)<br />
120 115 01, length 231 mm (per 10, integrated nipples)<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Aerodynamic spoke wrench M40567 (with rear wheel)<br />
• 1 pair of Mavic Carbon brake pads for braking on carbon rim with the rear wheel:<br />
HG/Sram/Mavic 120 131 01 or ED 120 132 01<br />
• 2 pairs of Mavic Carbon brake pads for braking on carbon rim with the front wheel:<br />
HG/Sram/Mavic 120 131 01 and ED 120 132 01<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Wheel bags M40135<br />
• Yksion GripLink front tubular 23c 119 412 01<br />
• Yksion PowerLink rear tubular 23c 118 491 01<br />
• Wheel user guide<br />
• Tubular user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TUBULAR<br />
Front<br />
Rear M10<br />
Rear ED11<br />
800 g<br />
965 g<br />
950 g<br />
Replacing the front axle<br />
Replacing the front bearings<br />
Replacing the rear axle<br />
Replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
Bonding a tubular<br />
M40591 (ED10)<br />
M40592 (M10)<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
324 130 01<br />
TENSION:<br />
Front: 120 to 140 kg<br />
Rear drive side: 140 to 160 kg<br />
See 2005 TM, page 20<br />
See 2005 TM, page 20<br />
See 2003 TM, page 19<br />
See 2003 TM, page 21<br />
See 2003 TM, page 22<br />
See 2005 TM, page 23<br />
See 2006 TM, page 18<br />
See 2006 TM, page 19<br />
See Mavic tubular user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
11150410<br />
11150511<br />
11150612<br />
11150714<br />
11150814<br />
9
COSMIC CARBONE SLR 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
M40078<br />
996 033 01<br />
M40063<br />
996 032 01<br />
119 904 01 119 904 01<br />
996 035 01 996 034 01<br />
M40077<br />
M40578<br />
995 000 01<br />
M40592 (M10)<br />
M40591 (ED10)<br />
M40067 324 130 01<br />
119 904 01 119 936 01<br />
FEATURES:<br />
Unidirectional R2R carbon spokes (rim to rim), ABS nipples<br />
When replacing the rear rim:<br />
The side of the rim on which the spoke holes are the nearest to the trailing edge is the drive side.<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels.<br />
The use of other brake pads may be dangerous for the user and may void the warranty. Please carefully read the «Exalith Warning» provided<br />
with your wheels. Clean with a dry cloth or soapy water if necessary.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front: 120 169 10<br />
Rear: 129 169 13<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 55 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: ETRTO 622 x 13C<br />
Recommended tire width: 19 to 28 mm<br />
Front and rear non-drive side: 119 901 01, R2R spokes (per 5, with ABS nipples) and 2 hub caps<br />
Drive side: 996 836 01, R2R spokes (per 7, with ABS nipples)<br />
LACING PATTERN:<br />
Front and Rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Removable computer magnet (front wheel) 996 245 01<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Aerodynamic spoke wrench 101 295 01 (with rear wheel)<br />
• Spoke wrench M40001 (with rear wheel)<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Rim tape<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• 1 pair of Mavic Exalith brake pads for Exalith brake track with the rear wheel:<br />
HG/Sram/Mavic 120 164 01 or ED 120 165 01<br />
• 2 pairs of Mavic Exalith brake pads for Exalith brake track with the front wheel:<br />
HG/Sram/Mavic 120 164 01 and ED 120 165 01<br />
• Yksion GripLink front clincher 23c 118 498 01<br />
• Yksion PowerLink rear clincher 23c 118 502 01<br />
• 2 Mavic butyl inner tubes 111 040 01<br />
• Wheel user guide<br />
• Tire user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TIRE<br />
Front<br />
Rear M10<br />
Rear ED11<br />
725 g<br />
885 g<br />
870 g<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
New hub cap<br />
Replacing the rear rim<br />
Important notes about Exalith rims<br />
Tire replacement<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
TENSION:<br />
Front: 80 to 100 kg<br />
Rear drive side: 130 to 150 kg<br />
See 2005 TM, page 20<br />
See 2008 TM, page 23<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2009 TM, page 32<br />
See 2009 TM, page 33<br />
See <strong>2011</strong> TM, page 33<br />
See 2009 TM, page 34/35<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tire user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
111 672 10<br />
111 673 11<br />
111 674 12<br />
111 675 14<br />
111 676 14<br />
10
COSMIC CARBONE SR<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
M40078<br />
996 033 01<br />
M40063<br />
996 032 01<br />
119 904 01 119 904 01<br />
996 035 01 996 034 01<br />
M40077<br />
M40578<br />
995 000 01<br />
M40592 (M10)<br />
M40591 (ED10)<br />
M40067 324 130 01<br />
119 904 01 119 936 01<br />
REFERENCES AND<br />
LENGTHS:<br />
FEATURES:<br />
Unidirectional R2R carbon spokes (rim to rim), ABS nipples<br />
SALES REFERENCES: Front: 120 170 10<br />
Rear: 120 170 13<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 55 mm<br />
When replacing the rear rim:<br />
The side of the rim on which the spoke holes are the nearest to the trailing edge is the drive side.<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
Front and rear non-drive side:<br />
Drive side:<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: ETRTO 622 x 13C<br />
Recommended tire width: 19 to 28 mm<br />
LACING PATTERN:<br />
Front and Rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Removable computer magnet (front wheel) 996 245 01<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Aerodynamic spoke wrench 101 295 01 (with rear wheel)<br />
• Spoke wrench M40001 (with rear wheel)<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Rim tape<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front<br />
Rear M10<br />
Rear ED11<br />
725 g<br />
885 g<br />
870 g<br />
119 901 01, R2R spokes (per 5, with ABS nipples) and 2 hub caps<br />
996 836 01, R2R spokes (per 7, with ABS nipples)<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
New hub cap<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
TENSION:<br />
Front: 80 to 100 kg<br />
Rear drive side: 130 to 150 kg<br />
119 216 10<br />
119 217 11<br />
119 218 12<br />
119 219 14<br />
119 220 14<br />
See 2005 TM, page 20<br />
See 2008 TM, page 23<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2009 TM, page 32<br />
See 2009 TM, page 33<br />
See <strong>2011</strong> TM, page 33<br />
See 2009 TM, page 34/35<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
11
COSMIC CARBONE SL 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
M40676<br />
REFERENCES AND<br />
LENGTHS:<br />
FEATURES:<br />
Black steel straight pull spokes with ABS spoke nipples<br />
SALES REFERENCES: Front: 120 171 10<br />
Rear: 120 171 13<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 55 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
M40052<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
M40075<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: ETRTO 622 x 13C<br />
Recommended tire width: 19 to 28 mm<br />
When replacing the rear rim:<br />
1. With the valve hole near you, turn the rim so that the «infobloc» label can be seen.<br />
2. The first spoke to the right of the valve hole is a non-traction spoke and should be inserted in the drive side hub.<br />
M40063<br />
M40578<br />
M40078<br />
323 860 01<br />
M40759<br />
M40578<br />
995 000 01<br />
M40067<br />
996 841 01, length 289 mm (per 8, integrated nipples)<br />
996 842 01, length 306 mm (per 10, integrated nipples)<br />
996 843 01, length 288 mm (per 10, integrated nipples)<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: 2-crossed drive side, radial non-drive side<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 301 front quick release 996 939 01<br />
• BR 301 rear quick release 996 940 01<br />
• locking ring ED11 12D (with rear wheel ED11) 108 317 01 free play adjustment wrench<br />
M40123 (with the rear wheel)<br />
• Spoke wrench M40001 (with rear wheel)<br />
• Aerodynamic spoke wrench M40567 (with rear wheel)<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• Rim tape<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front<br />
Rear M10<br />
Rear ED11<br />
780 g<br />
975 g<br />
960 g<br />
Replacing the front axle<br />
Replacing the front bearings<br />
Replacing the rear axle<br />
Replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
M40591 (ED10)<br />
M40592 (M10)<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
118 093 10<br />
118 094 11<br />
118 095 12<br />
118 096 14<br />
118 097 14<br />
324 130 01<br />
TENSION:<br />
Front: 80 to 100 kg<br />
Rear drive side: 150 to 170 kg<br />
See 2005 TM, page 20<br />
See 2005 TM, page 20<br />
See 2003 TM, page 19<br />
See 2003 TM, page 21<br />
See 2003 TM, page 22<br />
See 2005 TM, page 23<br />
See 2005 TM, page 24<br />
See 2005 TM, page 27<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
12
COSMIC ELITE 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross bike,<br />
or off-road use...) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
30,5<br />
RIMS<br />
19,4<br />
HUBS<br />
12034401<br />
10<br />
WHEEL BUILDING<br />
99603801<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and Rear: 120 173 15<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 55 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
99603701<br />
FEATURES:<br />
Rear Wheel: black steel bladed, straight pull spokes with ABS spoke nipples<br />
Front Wheel: Self-Lock type black steel bladed, straight pull spokes with standard nipples<br />
12034401<br />
99603901<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
99603801<br />
M40318<br />
M40660<br />
M40578<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: 2-crossed drive side, radial non-drive side<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Conventional alu quick-release skewer on front M40350<br />
• Conventional alu quick-release skewer on rear M40351<br />
• Rim tape<br />
• Aerodynamic spoke wrench M40567 (with rear wheel)<br />
• Aluminum valve extender, 60 mm, 118 952 01<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front<br />
Rear M10<br />
Rear ED11<br />
815 g<br />
955 g<br />
970 g<br />
120 289 01, length 276 mm (per 10 with nipples and 1 retaining ring)<br />
120 291 01, length 292 mm (per 10, with nipples)<br />
120 290 01, length 276 mm (per 10 with nipples and 1 retaining ring)<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
112 108 10<br />
112 109 11<br />
112 110 12<br />
112 111 14<br />
112 112 14<br />
99500001 M40067<br />
TENSION:<br />
Front: 70 to 90 kg<br />
Rear drive side: 145 to 165 kg<br />
See 2004 TM, page 19<br />
See 2004 TM, page 20<br />
See 2004 TM, page 21<br />
See 2002 TM, page 22<br />
See 2008 TM, page 25<br />
See 2008 TM, page 25<br />
See 2010 TM, page 22<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
M40592<br />
M40591<br />
13
R-SYS SLR 11 (tubular version)<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
996 035 01<br />
WHEEL BUILDING<br />
When replacing the rear rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
2. The spoke in the first hole to the right of the valve hole is a non-traction spoke and should be introduced in the drive side.<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels. The<br />
use of other brake pads may be dangerous for the user and may void the warranty. Please carefully read the «Exalith Warning» provided with<br />
your wheels. Clean with a dry cloth or soapy water if necessary.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Tubular Front:<br />
Rear:<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
996 938 01<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
996 938 01<br />
M40078<br />
996 853 01<br />
M40063<br />
FEATURES:<br />
Front and rear non-drive side: carbon tubular spokes (Tracomp) - new generation<br />
Rear drive side: black swaged, bladed, straight pull Zicral spokes with integrated, self-locking M7<br />
nipples<br />
120 204 10<br />
120 204 13<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: Ø 700<br />
633 tubular only<br />
Recommended tubular width: 19 to 23 mm<br />
M40077<br />
996 854 01<br />
M40578<br />
995 000 01<br />
120,297 01, length 285 mm (per 9, integrated nipples)<br />
120 292 01, length 297.5 mm (per 10, integrated nipples)<br />
120 293 01, length 286.7 mm (per 11, integrated nipples)<br />
LACING PATTERN:<br />
Front: radial, Tracomp system<br />
Rear: 2-cross lacing drive side, radial nondrive<br />
side, Tracomp system<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Removable built-in computer magnet (front) 105 416 01<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Spoke wrench 996 079 01 (with rear wheel)<br />
• Zicral spoke wrench M40567 (with rear wheel)<br />
• Tracomp ring tool 996 080 01<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel bags M40135<br />
• 1 pair of Mavic Exalith brake pads for Exalith brake track with the rear wheel:<br />
HG/Sram/Mavic 120 164 01 or ED 120 165 01<br />
• 2 pairs of Mavic Exalith brake pads for Exalith brake track with the front wheel:<br />
HG/Sram/Mavic 120 164 01 and ED 120 165 01<br />
• Yksion GripLink front tubular 23c 119 412 01<br />
• Yksion PowerLink rear tubular 23c 118 491 01<br />
• Wheel user guide<br />
• Tubular user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TUBULAR<br />
Front<br />
Rear M10<br />
Rear ED11<br />
M40067<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Important note for fitting Tracomp spokes<br />
Identifying a damaged Tracomp spoke<br />
Removing/Refitting the Tracomp ring<br />
Truing and replacing a Tracomp spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
Important notes about Exalith rims<br />
Bonding a tubular<br />
M40052<br />
M40591 (ED10)<br />
M40592 (M10)<br />
995 469 01<br />
TENSION:<br />
Front: 75 to 95 kg<br />
Rear drive side: 90 to 110 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
Never turn a Tracomp spoke nipple without having first removed the Tracomp rings from the hub, otherwise the spoke may be irreversibly damaged.<br />
Never fit a computer magnet other than the one supplied with the wheel.<br />
Only transport the wheels in the wheel bags supplied. Avoid side shocks to the Tracomp spokes.<br />
675 g<br />
775 g<br />
760 g<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
120 058 10<br />
111 996 11<br />
111 997 12<br />
120 061 14<br />
120 062 14<br />
See 2005 TM, page 20<br />
See 2008 TM, page 24<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2008 TM, page 28<br />
See 2008 TM, page 28<br />
See 2009 TM, page 36<br />
See 2008 TM, page 30<br />
See 2008 TM, page 30<br />
See 2008 TM, page 31<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tubular user guide<br />
14
R-SYS SLR (clincher version)<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
996 035 01<br />
When replacing the rear rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
2. The spoke in the first hole to the right of the valve hole is a non-traction spoke and should be introduced in the drive side.<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels.<br />
The use of other brake pads may be dangerous for the user and may void the warranty. Please carefully read the «Exalith Warning» provided<br />
with your wheels. Clean with a dry cloth or soapy water if necessary.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Clincher Front: 120 206 10<br />
Rear: 120 206 13<br />
Ø VALVE HOLE<br />
RECOMMENDED TIRE WIDTH<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
996 938 01<br />
996 938 01<br />
M40078<br />
996 853 01<br />
FEATURES:<br />
Front and rear non-drive side: carbon tubular spokes (Tracomp) - new generation<br />
Rear drive side: black round, straight pull Zicral spokes with integrated, self-locking M7 nipples<br />
M40063<br />
Dimensions:<br />
ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
M40077<br />
996 854 01<br />
M40578<br />
M 40579<br />
120 296 01, length 285 mm (per 9, integrated nipples)<br />
120 294 01, length 294.5 mm (per 10, integrated nipples)<br />
120 295 01, length 283.7 mm (per 10, integrated nipples)<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Removable computer magnet (front wheel) 105 416 01<br />
• Spoke wrench 996 079 01 (with rear wheel)<br />
• Zicral spoke wrench M40567 (with rear wheel)<br />
• Tracomp ring tool 996 080 01<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel bags M40135<br />
• 1 pair of Mavic Exalith brake pads for Exalith brake track with the rear wheel: HG/Sram/<br />
Mavic 120 164 01 or ED 120 165 01<br />
• 2 pairs of Mavic Exalith brake pads for Exalith brake track with the front wheel: HG/Sram/<br />
Mavic 120 164 01 and ED 120 165 01<br />
• Yksion GripLink front clincher 23c 118 498 01<br />
• Yksion PowerLink rear clincher 23c 118 502 01<br />
• 2 Mavic butyl inner tubes 111 040 01<br />
• Wheel user guide<br />
• Tire user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TIRE<br />
Front<br />
Rear M10<br />
Rear ED11<br />
M40052<br />
M40067<br />
LACING PATTERN:<br />
Front: radial, Tracomp system<br />
Rear: 2-cross lacing drive side, radial non-drive<br />
side, Tracomp system<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Important note for fitting Tracomp spokes<br />
Identifying a damaged Tracomp spoke<br />
Removing/Refitting the Tracomp ring<br />
Truing and replacing a Tracomp spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
Important notes about Exalith rims<br />
Tire replacement<br />
M40591 (ED11)<br />
M40592 (M10)<br />
TENSION:<br />
Front: 75 to 95 kg<br />
Rear drive side: 90 to 110 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
Never turn a Tracomp spoke nipple without having first removed the Tracomp rings from the hub, otherwise the spoke may be irreversibly damaged.<br />
Never fit a computer magnet other than the one supplied with the wheel.<br />
Only transport the wheels in the wheel bags supplied. Avoid side shocks to the Tracomp spokes.<br />
605 g<br />
780 g<br />
765 g<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
120 057 10<br />
111 990 11<br />
111 991 12<br />
120 059 14<br />
120 060 14<br />
See 2005 TM, page 20<br />
See 2008 TM, page 24<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2008 TM, page 28<br />
See 2008 TM, page 28<br />
See 2009 TM, page 36<br />
See 2008 TM, page 30<br />
See 2008 TM, page 30<br />
See 2008 TM, page 31<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tire user guide<br />
15
KSYRIUM SLR Front (tubular version)<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
9<br />
RIMS<br />
20,5<br />
HUBS<br />
WHEEL BUILDING<br />
22<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Tubular Front: 120 295 01<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
Front:<br />
M40078<br />
M40759<br />
FEATURES:<br />
Black bladed, straight pull Zicral spokes with integrated and self-locking M7 nipples<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: Ø 700<br />
633 tubular only<br />
Recommended tubular width: 19 to 23 mm<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels.<br />
The use of other brake pads may be dangerous for the user and may void the warranty. Please carefully read the «Exalith Warning» provided<br />
with your wheels. Clean with a dry cloth or soapy water if necessary.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
M40063<br />
120 302 01, length 284.5 mm (per 12, integrated nipples)<br />
LACING PATTERN:<br />
Front: radial<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• Computer magnet M40540<br />
• Wheel bag M40135<br />
• 2 pairs of Mavic Exalith brake pads for Exalith brake track with the front wheel:<br />
HG/Sram/Mavic 120 164 01 and ED 120 165 01<br />
• Yksion GripLink front tubular 23c 119 412 01<br />
• Wheel user guide<br />
• Tubular user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TUBULAR<br />
Replacing the front axle and bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Important notes about Exalith rims<br />
Bonding a tubular<br />
M40052<br />
WHEEL REFERENCES<br />
Front 620 g Front 111 378 10<br />
TENSION:<br />
Front: 110 to 130 kg<br />
See 2005 TM, page 20<br />
See 2003 TM, page 23<br />
See 2003 TM, page 27<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tubular user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
16
KSYRIUM SLR Front (clincher version)<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Clincher Front: 120 208 10<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
M40078<br />
M40759<br />
FEATURES:<br />
Black bladed, straight pull Zicral spokes with integrated and self-locking M7 nipples<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 28 mm<br />
EXALITH: for efficient and long-lasting braking performance, use only the special Mavic ® Exalith ® brake pads supplied with your wheels. The<br />
use of other brake pads may be dangerous for the user and may void the warranty. Please carefully read the «Exalith Warning» provided with<br />
your wheels. Clean with a dry cloth or soapy water if necessary.<br />
The brake pads can be ordered separately using the following references 120 164 01 (HG, Sram, Mavic) and 120 165 01 (ED).<br />
M40063<br />
Front: 120 302 01, length 284.5 mm (per 12, integrated nipples)<br />
LACING PATTERN:<br />
Front: radial<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• Computer magnet M40540<br />
• Wheel bag M40135<br />
• 2 pairs of Mavic Exalith brake pads for Exalith brake track with the front wheel:<br />
HG/Sram/Mavic 120 164 01 and ED 120 165 01<br />
• Yksion GripLink front clincher 23c 118 498 01<br />
• 1 Mavic butyl inner tube 111 040 01<br />
• Wheel user guide<br />
• Tire user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TIRE<br />
WHEEL REFERENCES<br />
Front 635 g Front 111 369 10<br />
Replacing the front axle and bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Important notes about Exalith rims<br />
Tire replacement<br />
M40052<br />
TENSION:<br />
Front: 110 to 130 kg<br />
See 2005 TM, page 20<br />
See 2003 TM, page 23<br />
See 2003 TM, page 27<br />
See <strong>2011</strong> TM, page 28<br />
See Mavic tire user guide<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
17
KSYRIUM SR<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
996 035 01<br />
WHEEL BUILDING<br />
REFERENCES AND<br />
LENGTHS:<br />
996 938 01<br />
M40078<br />
M40759<br />
FEATURES:<br />
Black bladed, straight pull Zicral spokes with integrated and self-locking M7 nipples<br />
SALES REFERENCES: Front: 120 209 10<br />
Rear: 120 209 13<br />
Ø VALVE HOLE<br />
RECOMMENDED TIRE WIDTH<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
When replacing the rear rim:<br />
3. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
4. The spoke in the first hole to the right of the valve hole is a non-traction spoke and should be inserted in the drive side.<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
Front:<br />
Drive side:<br />
Non-drive side:<br />
Dimensions: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
M40077<br />
996 042 01<br />
M40063<br />
M40578<br />
LACING PATTERN:<br />
Front: radial<br />
995 000 01<br />
120 302 01, length 285 mm (per 12, integrated nipples)<br />
120 301 01, length 294.5 mm (per 10, integrated nipples)<br />
120 295 01, length 284 mm (per 10, integrated nipples)<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Computer magnet M40540 (with front wheel)<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Spoke wrench 996 079 01 (with rear wheel)<br />
• Zicral spoke wrench M40567<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER AND<br />
WITHOUT TIRE<br />
Front<br />
Rear M10<br />
Rear ED11<br />
M40052<br />
M40067<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Important note for fitting Tracomp spokes<br />
Removing/Refitting the Tracomp ring<br />
Truing and replacing a Tracomp spoke<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
M40591 (ED11)<br />
M40592 (M10)<br />
324 130 01<br />
TENSION:<br />
Front: 110 to 130 kg<br />
Rear drive side: 120 to 140 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
Never turn a Tracomp spoke nipple without having first removed the Tracomp rings from the hub, otherwise the spoke may be irreversibly damaged.<br />
Never fit a computer magnet other than the one supplied with the wheel.<br />
Only transport the wheels in the wheel bags supplied. Avoid side shocks to the Tracomp spokes.<br />
645 g<br />
815 g<br />
800 g<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
112 018 10<br />
112 019 11<br />
112 020 12<br />
112 021 14<br />
112 022 14<br />
See 2005 TM, page 20<br />
See 2008 TM, page 24<br />
See 2003 TM, page 21<br />
See 2008 TM, page 24<br />
See 2008 TM, page 28<br />
See 2009 TM, page 36<br />
See 2008 TM, page 30<br />
See 2003 TM, page 23<br />
See 2008 TM, page 30<br />
See 2008 TM, page 31<br />
18
KSYRIUM SL 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
M40676<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Black: Front: 120 210 10<br />
Rear: 120 210 13<br />
Ø VALVE HOLE<br />
RECOMMENDED TIRE WIDTH<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
When replacing the rear rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
2. The spoke in the first hole to the right of the valve hole should be introduced into the drive side in a marked hole on the hub.<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
M40078<br />
M40759<br />
Front:<br />
Rear drive side:<br />
Rear non-drive side:<br />
FEATURES:<br />
Black bladed, straight pull Zicral spokes with integrated, and self-locking M7 nipples<br />
M40075<br />
M40578<br />
M40063<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: Isopulse<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 601 front quick-release skewer M40149<br />
• BR 601 rear quick-release skewer M40150<br />
• Computer magnet M40540 (with front wheel)<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Zicral spoke wrench M40494 (with rear wheel)<br />
• Spoke wrench 996 079 01 (with rear wheel)<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front<br />
Rear M10<br />
Rear ED11<br />
645 g<br />
855 g<br />
840 g<br />
Dimensions:<br />
Ø 700: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
M40052<br />
995 000 01<br />
M40067 M40592 (M10)<br />
M40591 (ED10)<br />
995 937 01<br />
120 302 01, length 284.5 mm (per 12, integrated nipples)<br />
120 303 01, length 275 mm (per 10, integrated nipples)<br />
120 304 01, length 298.5 mm (per 10, integrated nipples)<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
324 130 01<br />
112 161 10<br />
112 162 11<br />
112 163 12<br />
112 164 14<br />
112 165 14<br />
TENSION:<br />
Front: 110 to 130 kg<br />
Rear drive side: 120 to 140 kg<br />
See 2005 TM, page 20<br />
See 2007 TM, page 20<br />
See 2003 TM, page 21<br />
See 2003 TM, page 22<br />
See 2003 TM, page 23<br />
See 2003 TM, page 27<br />
See 2006 TM, page 17<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
19
KSYRIUM Elite 11<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
M40063<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Black: Front: 120 219 10<br />
Rear: 120 219 13<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
When replacing the rear rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the left of the valve hole<br />
2. The first spoke to the right of the valve hole is a traction spoke and should be inserted in the hub non-drive side<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
996 862 01<br />
Black:<br />
Silver:<br />
99686101<br />
M40063<br />
Front<br />
Rear drive side<br />
Rear non-drive side<br />
FEATURES:<br />
Ultra-flat straight pull stainless steel spokes with integrated and self-locking M7 nipples<br />
12038201<br />
Front<br />
Rear drive side<br />
Rear non-drive side 120 305 01,<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions:<br />
Ø 700: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
M40578<br />
M40318<br />
995 000 01<br />
M40660 M40067<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: Isopulse<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 301 front quick release 996 939 01<br />
• BR 301 rear quick release 996 940 01<br />
• Free play adjustment wrench M40123 (with rear wheel)<br />
• Spoke wrench M40567 (with rear wheel)<br />
• Spoke wrench 996 079 01 (with rear wheel)<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front<br />
Rear M10<br />
Rear ED11<br />
690 g<br />
875 g<br />
860 g<br />
Silver: Front: 120 220 10<br />
Rear: 120 220 13<br />
M40591 (ED10)<br />
M40592 (M10)<br />
length 284 mm (per 9, integrated nipples)<br />
120 306 01, length 275 mm (per 10, integrated nipples)<br />
120 307 01, length 301 mm (per 10, integrated nipples)<br />
120 308 01, length 284 mm (per 9, integrated nipples)<br />
120 309 01, length 275 mm (per 10, integrated nipples)<br />
120 310 01, length 301 mm (per 10, integrated nipples)<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
REFERENCES WHEELS<br />
Black Silver<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
112 215 10<br />
112 216 11<br />
112 218 12<br />
112 219 14<br />
112 221 14<br />
324 130 01<br />
TENSION:<br />
Front: 80 to 90 kg<br />
Rear drive side: 140 to 160 kg<br />
See 2005 TM, page 20<br />
See 2007 TM, page 20<br />
See 2003 TM, page 21<br />
See 2004 TM, page 22<br />
See <strong>2011</strong> TM, page 30<br />
See 2008 TM, page 25<br />
See 2009 TM, page 31<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
118 428 10<br />
118 429 11<br />
118 430 12<br />
118 431 14<br />
118 432 14<br />
20
KSYRIUM Equipe 11 (White & Black)<br />
Use: for road bike use only. Any other use (such as on a tandem, cyclo-cross<br />
bike, or off-road use...) is highly inadvisable, is the sole responsibility of the user<br />
and voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
996 038 01<br />
996 039 01<br />
WHEEL BUILDING<br />
21<br />
REFERENCES AND<br />
LENGTHS:<br />
FEATURES:<br />
Black bladed steel spokes and front Self-Lock and rear nipples<br />
SALES REFERENCES: Black: Front: 120 212 15<br />
White: Front: 120 214 15<br />
Ø VALVE HOLE<br />
RECOMMENDED TIRE WIDTH<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
99603701<br />
Front:<br />
Rear drive side:<br />
Rear non-drive side:<br />
12034401<br />
Dimensions:<br />
Ø 700: ETRTO 622 x 15C<br />
Recommended tire width: 19 to 32 mm<br />
99603801<br />
M40660<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: Isopulse<br />
M40318<br />
M40578<br />
120 312 01, length 282 mm (per 10, integrated nipples)<br />
120 313 01, length 278 mm (per 10, integrated nipples)<br />
120 314 01, length 301 mm (per 10, integrated nipples)<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Conventional aluminum quick-release skewer on front M40350<br />
• Conventional aluminum quick-release skewer on rear M40351<br />
• ED11 12D locking ring (with rear wheel ED11) 108 317 01<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE<br />
SKEWER (Black)<br />
Front<br />
Rear M10<br />
Rear ED11<br />
770 g<br />
920 g<br />
905 g<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEELS REFERENCES<br />
Black White<br />
Front<br />
Rear M10<br />
Rear ED11<br />
Pair M10<br />
Pair ED11<br />
995 000 01<br />
M40067<br />
111 569 10<br />
111 570 11<br />
111 571 12<br />
111 572 14<br />
111 573 14<br />
TENSION:<br />
Front: 80 to 90 kg<br />
Rear drive side: 130 to 150 kg<br />
See 2005 TM, page 20<br />
See 2007 TM, page 20<br />
See 2003 TM, page 21<br />
See 2004 TM, page 22<br />
See 2008 TM, page 25<br />
See 2008 TM, page 25<br />
See 2009 TM, page 31<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
111 584 10<br />
111 585 11<br />
111 586 12<br />
111 587 14<br />
111 588 14<br />
M40591 (ED10)<br />
M40592 (M10)<br />
21
CROSSTRAIL DISC 11<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
323 48 401<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and rear: 126 330 15<br />
Ø VALVE HOLE<br />
Ø: 6.5 mm<br />
Length: ≥ 32 mm<br />
Front:<br />
Rear drive side:<br />
Rear non-drive side:<br />
FEATURES:<br />
Black steel straight pull spokes with self-locking and integrated M7 spoke nipples<br />
When replacing the rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
2. The spoke in the first hole to the right of the valve hole is a non-braking spoke and should be introduced into the disc side.<br />
When replacing the rear rim:<br />
1. With the valve hole near you, the two raised indicator bumps must be to the right of the valve hole.<br />
2. The spoke in the first hole to the right of the valve hole is introduced in the drive side.<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
996 941 01<br />
108 462 01<br />
996 885 01<br />
323 48 001<br />
LACING PATTERN:<br />
Front: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Front quick-release skewer M40350<br />
• Rear quick-release skewer M40352<br />
• Removable UST valve 995 282 01<br />
• Spoke wrench<br />
• 2 disc adapters for conversion from Center Lock to International Standard<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE<br />
SKEWER AND WITHOUT ADAPTER<br />
Front:<br />
Rear:<br />
750 g<br />
925 g<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions:<br />
Ø 26” only<br />
ETRTO 559 x 19C compatible and Tubeless UST.<br />
Recommended tire width: 1.5” to 2.3”<br />
108 473 01<br />
M40660 324 30 301<br />
120 341 01, length 267.5 mm (per 12 with integrated nipples)<br />
120 342 01, length 265 mm (per 12 with integrated nipples)<br />
120 343 01, length 267.5 mm (per 12 with integrated nipples)<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCE<br />
Front:<br />
Rear:<br />
Pair:<br />
995 00 001<br />
STANDARD<br />
INTERNATIONAL<br />
112 005 10<br />
112 006 10<br />
112 007 14<br />
M40067<br />
TENSION:<br />
Front disc side: 90 to 110 kg<br />
Rear drive side: 110 to 130 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
M40592<br />
See 2010 TM, pages 21 and 22<br />
See 2004 TM, page 20<br />
See 2007 TM, page 21<br />
See 2004 TM, page 22<br />
See <strong>2011</strong> TM, page 31<br />
See 2004 TM, page 28<br />
See 2004 TM, page 29<br />
22<br />
CENTER<br />
LOCK
CROSSRIDE DISC 11 - 15 mm<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
323 48 401<br />
REFERENCES AND<br />
LENGTHS:<br />
FEATURES:<br />
Black bladed straight pull steel spokes with brass nipples<br />
SALES REFERENCES: Front and rear: 120 216 15<br />
Ø VALVE HOLE<br />
Ø: 8.5 mm with 6.5 mm valve<br />
adapter<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
108 462 01<br />
996 885 01<br />
323 48 001<br />
Front and rear: 995 435 01, length 271 mm (per 12, with nipples)<br />
108 473 01<br />
M40660 324 30 301<br />
LACING PATTERN:<br />
Front and rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• Conventional alu quick-release skewer on rear: M40351<br />
• Rim tape 559x20x0.6<br />
• 2 disc adapters for conversion from Center Lock to International Standard<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE<br />
SKEWER AND WITHOUT ADAPTER<br />
Front:<br />
Rear:<br />
835 g<br />
1015 g<br />
RECOMMENDED TIRE WIDTH<br />
Dimensions:<br />
Ø 26”<br />
ETRTO 559 x 19C<br />
Recommended tire width: 1.5 to 2.3<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front:<br />
Rear:<br />
Pair:<br />
995 00 001<br />
STANDARD<br />
INTERNATIONAL<br />
111 850 10<br />
128 137 13<br />
111 853 14<br />
M40067<br />
TENSION:<br />
Front: 100 to 120 kg<br />
Rear drive side: 120 to 140 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
M40592<br />
See 2010 TM, pages 21 and 22<br />
See 2004 TM, page 20<br />
See 2007 TM, page 21<br />
See 2004 TM, page 22<br />
See 2004 TM, page 25<br />
See 2004 TM, page 28<br />
See 2004 TM, page 29<br />
23<br />
CENTER<br />
LOCK
CROSSRIDE DISC 11 INTL<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 85 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
323 484 01<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and rear: 120 216 15<br />
Ø VALVE HOLE<br />
Ø: 8.5 mm with 6.5 mm valve<br />
adapter<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
FEATURES:<br />
Black steel straight pull spokes with Self-Lock system and conventional spoke nipples<br />
323 479 01<br />
M40318<br />
323 484 01<br />
M40660<br />
323 480 01<br />
Front and rear: 996 875 01, length 261 mm (per 12, with nipples)<br />
LACING PATTERN:<br />
Front and rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 101 front quick release: M40350<br />
• BR 101 rear quick release: M40351<br />
• Rim tape 559x20x0.6<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE<br />
SKEWER AND WITHOUT ADAPTER<br />
Front:<br />
Rear:<br />
880 g<br />
1020 g<br />
RECOMMENDED TIRE WIDTH AND PRESSURE<br />
Dimensions:<br />
Ø 26”<br />
ETRTO 559 x 19C<br />
Recommended tire width: 1.5 to 2.3<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
STANDARD INT<br />
Front:<br />
Rear:<br />
Pair:<br />
324 303 01<br />
995 000 01<br />
127 091 10<br />
127 092 13<br />
127 093 14<br />
TENSION:<br />
Front: 100 to 120 kg<br />
Rear drive side: 120 to 140 kg<br />
M40067<br />
M40592<br />
See 2004 TM, page 19<br />
See 2004 TM, page 20<br />
See 2004 TM, page 21<br />
See 2004 TM, page 22<br />
See 2004 TM, page 25<br />
See 2009 TM, page 38<br />
See 2009 TM, page 39<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
24<br />
STANDARD<br />
INTERNATIONAL
CROSSRIDE DISC 11 CL<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 85 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
323 484 01<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and rear: 120 216 15<br />
Ø VALVE HOLE<br />
Ø: 8.5 mm with 6.5 mm valve<br />
adapter<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
FEATURES:<br />
Black steel straight pull spokes with Self-Lock system and conventional spoke nipples<br />
323 479 01<br />
M40318<br />
323 484 01<br />
M40660<br />
323 480 01<br />
Front and rear: 996 875 01, length 261 mm (per 12, with nipples)<br />
LACING PATTERN:<br />
Front and rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 101 front quick release: M40350<br />
• BR 101 rear quick release: M40351<br />
• Rim tape 559x20x0.6<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE<br />
SKEWER AND WITHOUT ADAPTER<br />
Front:<br />
Rear:<br />
880 g<br />
1020 g<br />
RECOMMENDED TIRE WIDTH AND PRESSURE<br />
Dimensions:<br />
Ø 26”<br />
ETRTO 559 x 19C<br />
Recommended tire width: 1.5 to 2.3<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
CENTER LOCK<br />
Front:<br />
Rear:<br />
Pair:<br />
324 303 01<br />
995 000 01<br />
127 088 10<br />
127 089 13<br />
127 090 14<br />
TENSION:<br />
Front: 100 to 120 kg<br />
Rear drive side: 120 to 140 kg<br />
M40067<br />
M40592<br />
See 2004 TM, page 19<br />
See 2004 TM, page 20<br />
See 2004 TM, page 21<br />
See 2004 TM, page 22<br />
See 2004 TM, page 25<br />
See 2009 TM, page 38<br />
See 2009 TM, page 39<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
25<br />
CENTER<br />
LOCK
CROSSRIDE UB/DISC 11<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
323 484 01<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and rear: 120 217 15<br />
Ø VALVE HOLE<br />
Ø: 8.5 mm with 6.5 mm valve<br />
adapter<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
FEATURES:<br />
Silver stainless steel straight pull spokes with Self-Lock system and conventional spoke<br />
nipples<br />
323 479 01<br />
M40318<br />
323 484 01<br />
M40660<br />
323 480 01<br />
Front and rear: 996 892 01, length 261 mm (per 12, with nipples)<br />
LACING PATTERN:<br />
Front and rear: 2-cross lacing on both sides<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 101 front quick release: M40350<br />
• BR 101 rear quick release: M40351<br />
• Rim tape 559x20x0.6<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front:<br />
Rear:<br />
900 g<br />
1040 g<br />
RECOMMENDED TIRE WIDTH AND PRESSURE<br />
Dimensions:<br />
Ø 26”<br />
ETRTO 559 x 19C<br />
Recommended tire width: 1.5 to 2.3<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front:<br />
Rear:<br />
Pair:<br />
324 303 01<br />
995 000 01<br />
117 786 10<br />
117 787 13<br />
117 788 14<br />
TENSION:<br />
Front disc side: 100 to 120 kg<br />
Rear drive side: 120 to 140 kg<br />
M40067<br />
M40592<br />
See 2004 TM, page 19<br />
See 2004 TM, page 20<br />
See 2007 TM, page 21<br />
See 2004 TM, page 22<br />
See 2004 TM, page 25<br />
See 2009 TM, page 38<br />
See 2009 TM, page 39<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
26<br />
STANDARD<br />
INTERNATIONAL
CROSSRIDE UB 11<br />
Use: use only on a Cross-country or Cross-mountain MTB fitted with disc brakes.<br />
Any other use (such as on a tandem, road bike, cyclo-cross bike, free-ride or<br />
downhill bike…) is highly inadvisable, is the sole responsibility of the user and<br />
voids the Mavic warranty.<br />
Recommended maximum weight of the cyclist and equipment: 100 kg.<br />
RIMS<br />
HUBS<br />
WHEEL BUILDING<br />
REFERENCES AND<br />
LENGTHS:<br />
SALES REFERENCES: Front and rear: 120 218 15<br />
Ø VALVE HOLE<br />
Ø: 8.5 mm with 6.5 mm valve<br />
adapter<br />
Length: ≥ 32 mm<br />
MAINTENANCE: Clean with a dry cloth or soapy water if necessary.<br />
Do not use a high-pressure washer.<br />
323 484 01<br />
M40318<br />
FEATURES:<br />
Black steel bladed straight pull spokes with Self-Lock system and conventional spoke<br />
nipples<br />
323 479 01<br />
323 484 01<br />
RECOMMENDED TIRE WIDTH AND PRESSURE<br />
Dimensions:<br />
Ø 26”<br />
ETRTO 559 x 17C<br />
Recommended tire width: 1.5 to 2.1<br />
323 483 01<br />
M40660<br />
324 303 01<br />
Front and rear non-drive side: 996 069 01, length 253 mm (per 10, with nipples)<br />
Drive side: 996 070 01, length 276 mm (per 10, with nipples)<br />
LACING PATTERN:<br />
Front: radial<br />
Rear: 2-crossed drive side and radial non-drive<br />
side<br />
ACCESSORIES WHEELS SUPPLIED WITH:<br />
MAINTENANCE<br />
• BR 101 front quick release: M40350<br />
• BR 101 rear quick release: M40351<br />
• Rim tape 559x20x0.6<br />
• Wheel user guide<br />
WHEEL WEIGHT WITHOUT QUICK-RELEASE SKEWER<br />
Front:<br />
Rear:<br />
780 g<br />
920 g<br />
Replacing the front axle and bearings<br />
Replacing the rear axle<br />
Maintaining and replacing the free wheel mechanism<br />
Replacing the rear bearings<br />
Replacing a spoke<br />
Replacing the front rim<br />
Replacing the rear rim<br />
WHEEL REFERENCES<br />
Front:<br />
Rear:<br />
Pair:<br />
As the front hub is made up of three parts and the rear hub of two parts, maintenance operations on the hubs<br />
(replacing the axle or bearings) must always be carried out on the assembled wheel (hub, rim and spokes assembled).<br />
995 000 01<br />
117 792 10<br />
117 793 13<br />
117 794 14<br />
M40067<br />
TENSION:<br />
Front disc side: 100 to 120 kg<br />
Rear drive side: 120 to 140 kg<br />
Refer to the website for quick and convenient access to information: www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
M40592<br />
See 2004 TM, page 19<br />
See 2004 TM, page 20<br />
See 2004 TM, page 21<br />
See 2004 TM, page 22<br />
See 2008 TM, page 25<br />
See 2008 TM, page 25<br />
See 2008 TM, page 26<br />
27
IMPORTANT NOTES ABOUT EXALITH ® RIMS<br />
1) Brake pads:<br />
For efficient and long-lasting braking performance, use only Mavic ® Special Exalith brake pads as supplied with your wheels.<br />
The use of other brake pads may be dangerous for the user and may void the warranty.<br />
2) Breaking in the rim’s braking surface:<br />
A break-in period is necessary to ensure brake pad performance (approx. 500 km). To guarantee brake pad performance, the user must be careful<br />
not to brake suddenly during this period. There is a risk of premature wear to the brake pads during the rim break-in period. Compared with<br />
traditional rim surfaces, more frequent brake shoe adjustments may be necessary. The user must check brake pad wear before every ride.<br />
3) Limitation of warranty:<br />
A change in the appearance of the rim’s brake track may be caused by an accumulation of pollution under the brake pads.<br />
This change in appearance does not affect braking performance and is considered normal wear and tear not covered by warranty.<br />
4) Rotation direction:<br />
Warning. For efficient and durable braking performance, the wheel must be mounted according to the rotation direction indicated on the rim.<br />
Disregard of this instruction may be dangerous for the user and could void the warranty.<br />
28
WHEEL MAINTENANCE<br />
WARRANTY REMINDER<br />
Before any repair of a Mavic wheel (or any other Mavic product), please note that it is guaranteed against manufacturing or material defects for a period of two years<br />
from the date of purchase by the original user.<br />
This means that:<br />
• During the warranty period and when it is clearly covered by the warranty (first contact your MSC), you must return the Mavic wheel (or any other Mavic product)<br />
directly to your MSC to benefit in full from the Mavic warranty.<br />
However, if you decide to repair the wheel (or any other Mavic product) yourself, your customer will no longer benefit from the Mavic warranty.<br />
• For repairs after the warranty period has expired, we advise you to refer to the following pages before carrying out work on the Mavic wheel. When replacing the rim,<br />
please note the new serial number of the rim on the original warranty card and the date of replacement.<br />
Your customer’s new rim will only be covered by the Mavic warranty if this procedure is followed.<br />
REPAIRS<br />
The following pages will help you maintain the wheels of the <strong>2011</strong> range and are laid out as follows:<br />
WHEEL BUILDING<br />
Replacing a front spoke or the front rim on Ksyrium Elite 11 wheels ...................................................................................................................................................Page 30<br />
Replacing a spoke on Crosstrail G11 wheels ........................................................................................................................................................................................Page 31<br />
HUBS<br />
Bearing adjustment on iO Track ...........................................................................................................................................................................................................Page 31<br />
Lefty Disc hub clearance adjustment ...................................................................................................................................................................................................Page 32<br />
New hub cap: Cosmic Carbone SLR / SR ...........................................................................................................................................................................................Page 33<br />
STICKERS<br />
Replacing stickers on Cosmic Carbon (SL/SR/SLR/80/Ultimate) ........................................................................................................................................................Page 34<br />
Any maintenance operation not detailed in the following pages can be found in the <strong>tech</strong>nical manuals from previous years.<br />
Refer to the product sheets (pages 4 to 26 of this manual) for further details.<br />
All these procedures can also be found on www.<strong>tech</strong>-<strong>mavic</strong>.com<br />
Before any operation, we recommend removing:<br />
• the wheel from the bike by releasing the quick-release skewer<br />
• the skewer, the tire<br />
• the cassette and chain disc (if necessary) for the rear wheel<br />
• the brake disc (if necessary)<br />
29
WHEEL BUILDING<br />
REPLACING A SPOKE OR THE FRONT RIM ON KSYRIUM ELITE 11 WHEELS<br />
Tools needed:<br />
• Spoke wrench 996 079 01<br />
• Aerodynamic spoke wrench M40567<br />
• Mavic tensiometer 995 643 01 + tension-reading conversion chart supplied<br />
• 1 x 5 mm Allen wrench<br />
• 1 hub wrench M40123<br />
The spoke reference and length to be used are indicated in the product pages.<br />
The hub is in 3 parts (2 flanges + central tube). These 3 parts are not integral with each other.<br />
It is thus possible that, without the spokes in place (bare hub), the 2 flanges pivot in relation to each other. When under the tension of the spokes, they will move into the<br />
correct position by themselves.<br />
Adjustment nut side, remove the fork<br />
support which is clipped on the end of<br />
the axle.<br />
<strong>Manual</strong>ly pre-fit/screw in all the<br />
rim spokes until contact with the<br />
threadlocker.<br />
Insert the 5 mm Allen wrench into<br />
the end of the axle, side opposite the<br />
adjustment nut. Hold the adjustment nut<br />
with the hub wrench M40123.<br />
Insert each spoke head into the housings<br />
of one of the hub flanges, presenting<br />
them from the outside owing to the space<br />
freed up by the play in the axle.Repeat<br />
this operation for the other layer.<br />
1/2<br />
Using the Allen wrench ad the hub wrench M40123, retighten the axle (counterclockwise)<br />
until contact with the bearing is reached and then back off one-half<br />
turn.<br />
Unscrew the axle by turning the Allen wrench counter-clockwise. Turn it<br />
approximately 5 turns to free up enough play.<br />
Tension the wheel and center it<br />
definitively respecting the spoke tension<br />
indicated on the product pages.<br />
OK KO<br />
Screw each of the nipples uniformly (1 spoke wrench turn for each spoke and per<br />
wheel turn) to tension the wheel, while checking the proper position of their heads in<br />
the bottom of the hub groove to prevent spoke displacement or hub breakage.<br />
30
REPLACING A SPOKE ON CROSSTRAIL <strong>2011</strong><br />
Important note: as the head diameter of Mavic M7 spokes has been modified for the <strong>2011</strong> product range, the spoke wrench 996 079 01, formerly reserved for Tracomp<br />
spokes, will now be used for the new M7 spokes starting in <strong>2011</strong>.<br />
Tools needed:<br />
• 1 spoke wrench 996 079 01<br />
• 1 tensiometer + tension-reading conversion table adapted to the tensiometer used<br />
The spoke reference and length to be used are indicated in the product pages.<br />
If repair operations must be performed on a wheel having at least 3 broken spokes, we recommend that you remove the tension on the wheel by unscrewing each nipple<br />
to the limit of the brake ring before replacing the broken spokes.<br />
1. Unscrew the spoke nipple with the spoke wrench to release the tension.<br />
2. Remove the spoke from its notch.<br />
3. Completely unscrew and remove the spoke.<br />
4. Position the new spoke in its notch, making sure that the lacing is correct.<br />
5. Apply a thin drop of threadlocker on the spoke nipple threads.<br />
6. Tighten the spoke to put tension on the spoke (refer to the product pages for the appropriate tension for each wheel)<br />
7. Check wheel roundness and trueness<br />
The spokes are equipped with an anti-rotation system, preventing them from turning at the hub. The spokes will automatically lock into the hub when tensioned.<br />
BEARING ADJUSTMENT ON iO TRACK<br />
Important note: the hub on an iO Track wheel has been pre-adjusted at the factory for optimum use and to prevent premature wear. The free play can be modified.<br />
Incorrect free play adjustments can damage the bearings on the iO Track wheel or permanently alter their performance.<br />
Tools needed:<br />
• 15 mm open-end wrench<br />
1) If there is any play:<br />
2) In case of tightening<br />
Use a 15 mm open-end wrench to very Loosen the lock nut approximately ½<br />
lightly tighten the lock nut by monitoring turn, unlock the wheel, remove it from<br />
the play at the top of the wheel.<br />
the frame and remove the retaining<br />
screws. Give a light mallet tap on the<br />
axle lock nut to achieve freer rotation,<br />
fit the wheel back on the frame and<br />
perform the adjustment again as in the<br />
first case.<br />
31
LEFTY DISC HUB CLEARANCE ADJUSTMENT<br />
Tools needed<br />
1 clamp hub wrench<br />
1 bearing removal kit<br />
1 bearing press kit (M40218) for the disc side bearing<br />
1 mallet<br />
Loosen the non-disc side bearing<br />
protection cap with the hub wrench.<br />
Adjust the clearance with one or more<br />
spacers provided in the kit (5 elements)<br />
127 590 01.<br />
Refit the bearing protection cap with the<br />
hub wrench (9 Nm torque).<br />
If the clearance requires readjustment,<br />
repeat the operation.<br />
Remove the spacer and the wheel<br />
tightening screw on the fork.<br />
Refit the bearings using the bearing<br />
press kit 323 945 01 (non-disc side) and<br />
M40218 (disc side).<br />
Use the bearing removal kit to remove<br />
the bearings.<br />
Add a shim.<br />
OK KO<br />
Clip the tightening screw to the spacer on the flat-bottomed side (see photo).<br />
32
NEW HUB CAP: COSMIC CARBONE SLR / SR<br />
Tools needed<br />
1 fine-tip flat screwdriver (5 x 125 mm for example)<br />
Step 1:<br />
Remove the old cap.<br />
Unclip and remove the old hub cap<br />
by pressing on the inside with your<br />
thumbs while lifting the outside with<br />
your fingers.<br />
Step 2:<br />
Install the new cap.<br />
OK<br />
Step 3:<br />
Remove the new cap.<br />
Insert a flat-tip screwdriver (ideally 5<br />
x 125 mm) fully into an opening at the<br />
junction of two spokes. The tip of the<br />
screwdriver should be against the hub<br />
body.<br />
KO<br />
Position the new cap, making sure that its teeth are not touching the spokes.<br />
OK<br />
Place your thumbs on the two<br />
opposite edges of the cap and press<br />
to clip the cap onto the hub body.<br />
KO<br />
Caution: the screwdriver must be correctly positioned between two spokes<br />
and be in contact with the hub body. Incorrect positioning may result in spoke<br />
damage.<br />
Use the screwdriver to raise and remove the cap.<br />
Check that the cap is properly<br />
positioned.<br />
Caution: The cap must not touch the<br />
spokes.<br />
33
REPLACING STICKERS ON COSMIC CARBON (SL/SR/SLR/80/ULTIMATE)<br />
Remove the original “Cosmic” stickers<br />
by pulling them up very gently to prevent<br />
leaving adhesive residue on the surface<br />
of the rim.<br />
Next, place the 2nd “mic” part aligned<br />
with the “Cos” part. A constant space of<br />
13 mm must be observed between the<br />
top of the sticker and the top of the rim.<br />
Leave the small sticker with the Mavic<br />
logo in place: it will be used as a guide<br />
during placement of the new sticker;<br />
furthermore, it is not included in your<br />
new sticker kit.<br />
Clean the sides of the rim with the<br />
cleaning wipe supplied in the sticker kit.<br />
34<br />
First stick the “Cos” part, placing the<br />
right angle of the upper left-hand part of<br />
the letter C on the right end of the small<br />
sticker featuring the Mavic logo.<br />
A constant minimum space of 13 mm<br />
must be observed between the top of<br />
the sticker and the top of the rim.
TOOLS<br />
REFERENCE DESCRIPTION<br />
323 477 01 Multifunction tool:<br />
Removing the UST Tubeless rim tape (A).<br />
Fitting the UST © rim tape.<br />
Adjusting the front axles on the Cosmos, Ksyrium Équipe, Crossland, Crossmax Enduro, Crossmax Enduro Disc,<br />
Cosmic Élite 05 and Speedcity 05, Aksium, and Crossride 06 wheels, Crossride Disc, Crosstrail, Crosstrail Disc<br />
Aksium 08, Ksyrium Équipe 08, Crossride UB/Disc 08, Crossride UB (B), Aksium 10<br />
M40119<br />
M40120<br />
323 909 01<br />
M40373<br />
M40218<br />
323 945 01<br />
324 300 01<br />
996 887 01<br />
996 901 01<br />
Bearing press kits for bearings:<br />
M40075<br />
M40076<br />
Bearing press kits for bearings:<br />
M40077<br />
M40078<br />
Bearing press kit for R-Sys SL bearings<br />
Guide ring and bearing press kit for bearings:<br />
M40318<br />
M40660<br />
Bearing press kit for bearings:<br />
M40179<br />
Bearing press kit for bearings:<br />
M40771<br />
Bearing press kit for bearings:<br />
324 170 01<br />
Bearing press kit for hub bearings 9/15:<br />
996 885 01 and 996 886 01<br />
Bearing press kit for bearings M40076 used in ITS4 free wheel system hubs<br />
PRODUCT<br />
A+B: Press kit for the front wheel.<br />
A+C: Press kit for the rear wheel.<br />
D: Press kits for the front and rear wheels.<br />
E: Press kits for the front and rear wheel bearings.<br />
F: Guide ring for the 12 mm Allen wrench required to remove the free wheel from Crossroc UST, Crossroc UST Disc, Crossride, Crossride Céramic,<br />
Cosmos and Cosmic Élite wheels.<br />
C<br />
D<br />
D<br />
D<br />
C<br />
C<br />
F<br />
B<br />
B<br />
B<br />
A<br />
A<br />
A<br />
A<br />
35
REFERENCE DESCRIPTION PRODUCT<br />
996 080 01 Tracomp ring tool<br />
M40001<br />
101 295 01<br />
323 908 01<br />
M40567<br />
996 079 01<br />
M40652<br />
M40630<br />
996 220 01<br />
Spoke adjustment wrench for Cosmic Carbone, Cosmic Carbone SSC, Cosmic Carbone SL and Cosmic Carbone<br />
SLR wheels<br />
R2R spoke head tool<br />
Cosmic Carbone Pro spoke wrench kit + aerodynamic spoke wrench<br />
Aerodynamic spoke wrench kit<br />
Tracomp spoke wrench kit and new M7s (starting in <strong>2011</strong>)<br />
Zamak spoke tightening wrench kit for Fore M7 pierced wheels before <strong>2011</strong> (except R-Sys)<br />
Screw-in eye tightening wrench kit for Fore M9 pierced wheels and rims<br />
Cosmic Carbone Ultimate spoke wrench kit<br />
36
REFERENCE DESCRIPTION PRODUCT<br />
108 850 01 Bearing press kit for the bearings of 10/15 mm Crossride front hubs<br />
M40123 Hub wrench for adjusting the play on Mavic QRM+ hubs<br />
99613601<br />
99620401<br />
M40410<br />
Mavic mineral oil for lubricating FTS, FTS-L, FTS-X and ITS4 free wheel bodies<br />
Content 60 ml.<br />
Use this oil only for lubricating FTS, FTS-L, FTS-X and ITS4 free wheel bodies<br />
Mavic threadlocker<br />
Content 5 ml.<br />
Mavic abrasive rubber rim stone for cleaning the braking surface of the rim, Céramic or UB Control<br />
37
AUSTRALIA<br />
Groupe Sportif PTY Ltd<br />
27 Ceylon street<br />
3131 Nunawading victoria<br />
Tel: (+61) 388 781 000<br />
Fax: (+61) 388 781 001<br />
AUSTRIA<br />
Mavic ® Vertretung<br />
Geigelsteinstr. 10<br />
D-83080 Oberaudorf<br />
Tel: (+43) 0463 298 144<br />
Fax: (+43) 0463 298 146<br />
BENELUX<br />
Codagex<br />
Zandbergen, 10<br />
B-2480 Dessel<br />
Tel: (+32) 014 34 74 74<br />
Fax: (+32) 014 32 39 04<br />
CANADA<br />
OGC<br />
10555 Boul. Henri-Bourassa, Ouest<br />
St. Laurent, Qc<br />
H4S 1A1<br />
Tel: (+1) 5143 321 320<br />
Fax: (+1) 5143 351 691<br />
info@ogc.ca<br />
CHINA<br />
Holybrother Commercial<br />
Room 1707, Tower C, SOHO<br />
N°88 Jiango Road<br />
Chaoyang District, 100022<br />
Beijing<br />
Tel: (+86) 10 8589 8677 ext.12<br />
Fax: (+86) 10 6551 2052<br />
CZECH REPUBLIC /<br />
SLOVAKIA<br />
Kastar<br />
59211 Velka Losenice 326<br />
Tel: (+420) 566 624 336<br />
Fax: (+420) 566 626 240<br />
kastar@kastar.cz<br />
FRANCE<br />
Mavic ® S.A.S.<br />
Metz Tessy<br />
74996 Annecy Cedex 9<br />
Tel: (+33) 04 50 65 71 71<br />
Fax: (+33) 04 50 65 71 96<br />
GERMANY<br />
Mavic ® Vertretung<br />
Geigelsteinstr. 10<br />
D-83080 Oberaudorf<br />
Tel: (+49) 08033 305 200<br />
Fax: (+49) 08033 305 299<br />
ITALY<br />
Vittoria Spa<br />
Via Papa Giovanni XXIII, 1<br />
24040 Madone<br />
Tel: (+39) 035 499 39 11<br />
Fax: (+39) 035 499 39 75<br />
JAPAN<br />
Amer Sports Japan, Inc.<br />
Mavic ® Division<br />
TOC Ariake West Tower 8F 2-5-7,<br />
Ariake, Koutou-ku<br />
Tokyo 135-0063<br />
Tel: (+81) 3-3527-8718<br />
Fax: (+81) 3-3527-8738<br />
NEW ZEALAND<br />
Cycles Etc<br />
151 Neilson Street<br />
Onehunga - Auckland 1643<br />
Tel: (+64) 4 528 3608<br />
Fax: (+64) 4 528 3601<br />
POLAND<br />
Harfa-Harryson<br />
ul. Robotnicza 52a<br />
53-608 Wroclaw<br />
Tel: (+48) 071 372 15 70<br />
Fax: (+48) 071 327 80 92<br />
harfa-harryson@harfa-harryson.<br />
com.pl<br />
SOUTH AFRICA<br />
Dragons Sports (Pty) Ltd<br />
15 Solan Road<br />
Cape Town 8001<br />
Tel: (+27) 21 461 6252<br />
Fax: (+27) 21 461 9273<br />
SPAIN / PORTUGAL<br />
Amer Sports Spain, S.A.<br />
Mavic ®<br />
Parque de Negocios Mas Blau II<br />
C/ Conca de Barberà, 4-6<br />
08820 El Prat de Llobregat<br />
Barcelona<br />
Tel: (+34) 93 590 16 15<br />
Fax.: (+34) 93 262 51 01<br />
SWITZERLAND<br />
Mavic ® Vertretung<br />
Geigelsteinstr. 10<br />
D-83080 Oberaudorf<br />
Tel: (+41) 041 7841 274<br />
Fax: (+41) 041 7841 275<br />
UK<br />
Amer Sports UK Ltd<br />
Mavic ®<br />
Theta Building<br />
Lyon Way<br />
Frimley / Surrrey<br />
GU16 7ER<br />
Tel: (+44) 01276 404870<br />
gbcustomer.services@<strong>mavic</strong>.com<br />
USA<br />
Mavic ® Inc.<br />
17 Parkridge Road<br />
Haverhill, MA 01835<br />
Tel: (+1) 978 469 8400<br />
Fax: (+1) 978 373 1113<br />
Printed in France in June 2010 © Mavic SAS Simplified joint stock company with a capital of: € 26,838,822. Registered Office: the location known as “Les Croiselets”, 74370 Metz-<br />
Tessy. RCS Annecy 515 155 844 00019 - A.P.E. 4641Z. Intracommunity VAT No: FR09 515 155 844. Head Office Fax: 33 (0)4 50 65 71 96. Postal address and telephone number:<br />
Mavic SAS 74996 Annecy Cedex 9 - France. Tel. 33 (0)4 50 65 71 71. This document is not legally binding. Mavic SAS reserves the right not to sell all products in certain countries<br />
and to effect any useful or necessary changes. All rights reserved. Reproduction prohibited. Indicated wheels weight +/- 5%, without rim tape, and without quick release skewer.<br />
Rims weight +/- 10%.<br />
Please read carefully the recommendations for rim use in this document.<br />
Photos: Studio Bergoend, Didier Brandelet/Blue, Christian Chaize, John Gibson, Christophe Margot, Olaf Unverzart.<br />
www.<strong>mavic</strong>.com<br />
Graphic design: Elvis The Agence de Création / Realisation: blue-down.com / Printer: Imprimerie Férreol.